Showing 1–41 of 41 results for author: Ramakrishna, S A

Direct Determination of Photonic Stopband Topological Character: A Framework based on Dispersion Measurements

Authors: Nitish Kumar Gupta, Sapireddy Srinivasu, Mukesh Kumar, Anjani Kumar Tiwari, Sudipta Sarkar Pal, Harshawardhan Wanare, S. Anantha Ramakrishna

Abstract: Ascertainment of photonic stopband absolute topological character requires information regarding the Bloch eigenfunction spatial distribution. Consequently, the experimental investigations predominantly restrict themselves to the bulk-boundary correspondence principle and the ensuing emergence of topological surface state. Although capable of establishing the equivalence or inequivalence of bandga… ▽ More Ascertainment of photonic stopband absolute topological character requires information regarding the Bloch eigenfunction spatial distribution. Consequently, the experimental investigations predominantly restrict themselves to the bulk-boundary correspondence principle and the ensuing emergence of topological surface state. Although capable of establishing the equivalence or inequivalence of bandgaps, the determination of their absolute topological identity remains out of its purview. The alternate method of reflection phase-based identification also provides only contentious improvements owing to the measurement complexities pertaining to the interferometric setups. To circumvent these limitations, we resort to the Kramers-Kronig amplitude-phase causality considerations and propose an experimentally conducive method for bandgap topological character determination directly from the parametric reflectance measurements. Particularly, it has been demonstrated that in case of one-dimensional photonic crystals, polarization-resolved dispersion measurements suffice in qualitatively determining bandgap absolute topological identities. By invoking the translational invariance of the investigated samples, we also define a parameter Differential Effective Mass that encapsulates bandgap topological identities and engenders an experimentally discernible bandgap classifier. △ Less

Submitted 27 August, 2023; originally announced August 2023.

Experimental observation of Berreman modes in uniaxial anisotropic nanoporous alumina film on aluminium substrate

Authors: Dheeraj Pratap, Jitendra Kumar Pradhan, Subramanium Anantha Ramakrishna

Abstract: In this article, we demonstrate experimentally and verified numerically the excitation of Berreman modes that propagate in a dielectric film of uniaxial anisotropic nanoporous alumina grown on an aluminium substrate. It is an air-dielectric-metal asymmetric polaritonic system with a real part of the effective permittivity having a value near zero. The modes are excited at a wavelength lower than t… ▽ More In this article, we demonstrate experimentally and verified numerically the excitation of Berreman modes that propagate in a dielectric film of uniaxial anisotropic nanoporous alumina grown on an aluminium substrate. It is an air-dielectric-metal asymmetric polaritonic system with a real part of the effective permittivity having a value near zero. The modes are excited at a wavelength lower than the epsilon near zero wavelength region. Minimum reflection is observed for the mid-infrared p-polarized light, while maximum reflection is observed for the s-polarized light. The experimental results are numerically reproduced for both p- and s-polarized light and confirm the Berreman modes excitation in the system. At the exciting wavelength, the field is confined in the dielectric region near the air-dielectric interface. The reported system is straightforward and could be easily fabricated over a large scale and is helpful in a variety of mid-infrared applications such as thermal management systems, sensors, passive radiative cooling devices, non-linear applications, and terahertz frequency generation. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Comments: 14 pages, 6 figures

Clocking the Quantum Sojourn Time: Spurious Scatterings and Correction to the Larmor Clock

Authors: Nitish Kumar Gupta, A. M. Jayannavar, S. Anantha Ramakrishna

Abstract: We revisit the notions of the quantum-mechanical sojourn time in the context of the quantum clocks to enquire whether the sojourn time be clocked without the clock affecting the dynamics of the wave motion. Upon recognizing that the positivity of conditional sojourn time is not ensured even in the case of physically co-evolving clock mechanisms, we trace its origins to the non-trivial inadvertent… ▽ More We revisit the notions of the quantum-mechanical sojourn time in the context of the quantum clocks to enquire whether the sojourn time be clocked without the clock affecting the dynamics of the wave motion. Upon recognizing that the positivity of conditional sojourn time is not ensured even in the case of physically co-evolving clock mechanisms, we trace its origins to the non-trivial inadvertent scattering arising from the disparity, however weak, engendered by the very clock potential. Specifically, our investigations focus on the Larmor spin rotation-based unitary clock where the alleviation of these unphysical contributions has been achieved by correcting the mathematical apparatus of extracting the sojourn times. The corrections have been obtained for both the spin precession-based and spin alignment-based scenarios. The sojourn times so obtained are found to have proper high- and low-energy limits and turn out to be positive definite for an arbitrary potential. The regimen provided here is general and appeals equivalently for unitary as well as non-unitary clocks where the clock-induced perturbations couple to the system Hamiltonian. △ Less

Submitted 28 June, 2021; originally announced June 2021.

A simple metamaterial absorber associated with Fano-like resonance

Authors: Raghwendra Kumar, S. Anantha Ramakrishna

Abstract: A simple metamaterial absorber suitable for fabrication over large areas associated with a Fano like resonance is proposed. The proposed designed of the metamaterial absorber consists of photoresist disk arrays on a silicon substrate followed by the deposition of a tri layer of Au, ZnS and Au on the top of the structure. Due to the tri layer, there is a formation of a cavity between the substrate… ▽ More A simple metamaterial absorber suitable for fabrication over large areas associated with a Fano like resonance is proposed. The proposed designed of the metamaterial absorber consists of photoresist disk arrays on a silicon substrate followed by the deposition of a tri layer of Au, ZnS and Au on the top of the structure. Due to the tri layer, there is a formation of a cavity between the substrate and gold layer on the top of photoresist disk and a waveguide in the ZnS layer in between the gold layers on the substrate and the ZnS layer itself. The Fano like resonance arises due to the interference of the cavity mode and the guided-mode resonance as well as the Woods anomaly. The cavity mode resonance works as continuum mode whereas the guided mode resonance and Woods anomaly work as discrete modes. The spectral position of the resonance can be tuned by just controlling the thickness of the tri layer instead of the structural size and shape modification of the micro and nano-structures as usually done in conventional metamaterial absorbers. This design can be easily scaled for fabrication over large areas as it separates the structuring and deposition processes and makes them sequential thereby avoiding expensive and complex lift off or etching processes which are usually required for conventional metamaterial processing. △ Less

Submitted 6 April, 2019; originally announced April 2019.

Comments: 13 pages, 8 figures

Nanoporous alumina microtubes for metamaterial and plasmonic applications

Authors: Dheeraj Pratap, S. Anantha Ramakrishna

Abstract: Double anodization of aluminium microwires in an acid bath yields cylindrical nanoporous alumina with nonbranching radially emanating pores. The obtained nanoporous alumina is a cylindrically anisotropic as well as a radially inhomogeneous optical medium. Detailed structural characterization reveals that the nanopore diameter varies linearly with the radius of the aluminium microwire along the rad… ▽ More Double anodization of aluminium microwires in an acid bath yields cylindrical nanoporous alumina with nonbranching radially emanating pores. The obtained nanoporous alumina is a cylindrically anisotropic as well as a radially inhomogeneous optical medium. Detailed structural characterization reveals that the nanopore diameter varies linearly with the radius of the aluminium microwire along the radial direction. Microcracks form on the alumina shell during the anodization when sufficient thickness is formed due to volume expansion and stress accumulation. The formation of the microcracks can be monitored by the anodization current which shows sudden jumps when the cracks are formed. After removing the remaining aluminium at the core of the anodised wire the anisotropic and inhomogeneous alumina microtube is obtained. Such nanoporous alumina microtubes form unique optical waveguides and are useful for microscale heat transfer applications. △ Less

Submitted 27 January, 2022; v1 submitted 30 December, 2018; originally announced March 2019.

Comments: 12 pages, 7 figures, article

Report number: 1903.10296v1

Journal ref: Pramana volume 95, Article number: 136 (2021)

How long does a quantum particle or wave stay in given region of space?

Authors: S. Anantha Ramakrishna, Arun M. Jayannavar

Abstract: The delay time associated with a scattering process is one of the most important dynamical aspects in quantum mechanics. A common measure of this is the Wigner delay time based on the group velocity description of a wave-packet, which my easily indicate super-luminal or even negative times of interaction that are unacceptable. Many other measures such as dwell times have been proposed, but also su… ▽ More The delay time associated with a scattering process is one of the most important dynamical aspects in quantum mechanics. A common measure of this is the Wigner delay time based on the group velocity description of a wave-packet, which my easily indicate super-luminal or even negative times of interaction that are unacceptable. Many other measures such as dwell times have been proposed, but also suffer from serious deficiencies, particularly for evanescent waves. One important way of realising a timescale that is causally connected to the spatial region of interest has been to utilize the dynamical evolution of extra degrees of freedom called quantum clocks, such as the spin of an electron in an applied magnetic field or coherent decay or growth of light in an absorptive or amplifying medium placed within the region of interest. Here we provide a review of the several approaches developed to answer the basic question - how much time does a quantum particle (or wave) spend in a specified region of space? While a unique answer still evades us, important progress has been made in understanding the timescales and obtaining positive definite times of interaction by noting that all such clocks are affected by spurious scattering concomitant with the very clock potentials, however, weak they be and by eliminating the spurious scattering. △ Less

Submitted 17 December, 2016; originally announced December 2016.

Comments: Popular article, 25 pages, 6 figures

Resonant enhancement of Raman scattering in metamaterials with hybrid electromagnetic and plasmonic resonances

Authors: Sriram Guddala, Narayanarao Desai, S. Anantha Ramakrishna

Abstract: A tri-layer metamaterial perfect absorber of light, consisting of (Al/ZnS/Al) films with the top aluminium layer patterned as an array of circular disk nanoantennas, is investigated for resonantly enhancing Raman scattering from C-60 fullerene molecules deposited on the metamaterial. The metamaterial is designed to have resonant bands due to plasmonic and electromagnetic resonances at the Raman pu… ▽ More A tri-layer metamaterial perfect absorber of light, consisting of (Al/ZnS/Al) films with the top aluminium layer patterned as an array of circular disk nanoantennas, is investigated for resonantly enhancing Raman scattering from C-60 fullerene molecules deposited on the metamaterial. The metamaterial is designed to have resonant bands due to plasmonic and electromagnetic resonances at the Raman pump frequency (725 nm) as well as Stokes emission bands. The Raman scattering from C60 on the metamaterial with resonantly matched bands is measured to be enhanced by an order of magnitude more than from C60 on metamaterials with off-resonant absorption bands peaked at 1090 nm. The Raman pump is significantly enhanced due to the resonance with a propagating surface plasmon band, while the highly impedance matched electromagnetic resonance is expected to couple out the Raman emission efficiently. The nature and hybridization of the plasmonic and electromagnetic resonances to form compound resonances are investigated by numerical simulations. △ Less

Submitted 8 March, 2016; originally announced March 2016.

Comments: 9 pages, 4 figures

Journal ref: Journal of Optics, 2016

Thermally Induced Nonlinear Optical Absorption in Metamaterial Perfect Absorbers

Authors: Sriram Guddala, Raghwendra Kumar, S. Anantha Ramakrishna

Abstract: A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to… ▽ More A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to be dependent on the average laser power incident and not the peak laser intensity. The nonlinear behaviour is shown to arise from the heating due to the absorbed radiation and photo-thermal changes in the dielectric properties of aluminium. The metamaterial absorber is seen to be damage resistant at large laser intensities of 25 MW/cm2. △ Less

Submitted 2 January, 2015; originally announced January 2015.

Comments: Under review

Journal ref: Applied Physics Letters,2015

Anisotropic Metamaterial Optical Fibers

Authors: Dheeraj Pratap, S. Anantha Ramakrishna, Justin G. Pollock, Ashwin K. Iyer

Abstract: Internal physical structure can drastically modify the properties of waveguides: photonic crystal fibers are able to confine light inside a hollow air core by Bragg scattering from a periodic array of holes, while metamaterial loaded waveguides for microwaves can support propagation at frequencies well below cutoff. Anisotropic metamaterials assembled into cylindrically symmetric geometries consti… ▽ More Internal physical structure can drastically modify the properties of waveguides: photonic crystal fibers are able to confine light inside a hollow air core by Bragg scattering from a periodic array of holes, while metamaterial loaded waveguides for microwaves can support propagation at frequencies well below cutoff. Anisotropic metamaterials assembled into cylindrically symmetric geometries constitute light-guiding structures that support new kinds of exotic modes. A microtube of anodized nanoporous alumina, with nanopores radially emanating from the inner wall to the outer surface, is a manifestation of such an anisotropic metamaterial optical fiber. The nanopores, when filled with a plasmonic metal such as silver or gold, greatly increase the electromagnetic anisotropy. The modal solutions in anisotropic circular waveguides can be uncommon Bessel functions with imaginary orders. △ Less

Submitted 25 January, 2017; v1 submitted 28 November, 2014; originally announced November 2014.

Comments: 15 pages, 5 figures; Published

Journal ref: Optics Express Vol. 23, Issue 7, pp. 9074-9085 (2015)

Asymmetric coupling and dispersion of surface-plasmon-polariton waves on a periodically patterned anisotropic metal film

Authors: Jhuma Dutta, S. Anantha Ramakrishna, Akhlesh Lakhtakia

Abstract: The morphology of a columnar thin film (CTF) of silver renders it an effectively biaxially anisotropic continuum. CTFs of silver deposited on one-dimensional gratings of photoresist showed strong blazing action and asymmetrically coupled optical radiation to surface plasmon-polariton (SPP) waves propagating only along one direction supported by either the CTF/photoresist or the CTF/air interfaces.… ▽ More The morphology of a columnar thin film (CTF) of silver renders it an effectively biaxially anisotropic continuum. CTFs of silver deposited on one-dimensional gratings of photoresist showed strong blazing action and asymmetrically coupled optical radiation to surface plasmon-polariton (SPP) waves propagating only along one direction supported by either the CTF/photoresist or the CTF/air interfaces. Homogenization of the CTFs using the Bruggeman formalism revealed them to display hyperbolic dispersion, and the dispersion of SPP waves was adequately described thereby. △ Less

Submitted 23 September, 2014; originally announced September 2014.

Enhanced propagation of photon density waves in random amplifying media

Authors: Lalruatfela Renthlei, Harshawardhan Wanare, S. A. Ramakrishna

Abstract: We demonstrate enhanced wave-like character of diffuse photon density waves (DPDW) in an amplifying random medium. The amplifying nature makes it contingent to choose the wave solution that grows inside the amplifying medium, and has a propagation vector pointing opposite to the growth direction. This results in negative refraction of the DPDW at an absorbing-amplifying random medium interface as… ▽ More We demonstrate enhanced wave-like character of diffuse photon density waves (DPDW) in an amplifying random medium. The amplifying nature makes it contingent to choose the wave solution that grows inside the amplifying medium, and has a propagation vector pointing opposite to the growth direction. This results in negative refraction of the DPDW at an absorbing-amplifying random medium interface as well as the possibility of supporting "anti"-surface-like modes at the interface. A slab of amplifying random medium sandwiched between two absorbing random media supports waveguide resonances that can be utilized to extend the imaging capabilities of DPDW. △ Less

Submitted 23 November, 2013; originally announced November 2013.

Comments: 13 pages, 3 figures; Submitted to Optics Letters

Journal ref: Phys. Rev. A 91, 043825 (2015)

Focussing light in a bi-anisotropic slab with negatively refracting materials

Authors: Yan Liu, Sebastien Guenneau, Boris Gralak, S. Anantha Ramakrishna

Abstract: We investigate the electromagnetic response of a pair of complementary bi-anisotropic media, which consist of a medium with positive refractive index ($+\ep$, $+μ$, $+ξ$) and a medium with negative refractive index($-\ep$, $-μ$, $-ξ$). We show that this idealized system has peculiar imaging properties in that it reproduces images of a source, in principle, with unlimited resolution. We then consid… ▽ More We investigate the electromagnetic response of a pair of complementary bi-anisotropic media, which consist of a medium with positive refractive index ($+\ep$, $+μ$, $+ξ$) and a medium with negative refractive index($-\ep$, $-μ$, $-ξ$). We show that this idealized system has peculiar imaging properties in that it reproduces images of a source, in principle, with unlimited resolution. We then consider an infinite array of line sources regularly spaced in a one-dimensional photonic crystal (PC) consisting of 2n-layers of bi-anisotropic complementary media. Using coordinate transformation, we map this system into 2D corner chiral lenses of 2n heterogeneous anisotropic complementary media sharing a vertex, within which light circles around closed trajectories. Alternatively, one can consider corner lenses with homogeneous isotropic media and map them onto one dimensional PCs with heterogeneous bi-anisotropic layers. Interestingly, such complementary media are described by scalar, or matrix valued, sign-shifting parameters, which satisfy a generalized lens theorem, which can be derived using Fourier series solutions of the Maxwell's equations (in the former case), or from space-time symmetry arguments (in the latter case). Also of interest are 2D periodic checkerboards alternating rectangular cells of complementary media which are such that one point source in one cell gives rise to an infinite set of images with an image in every other cell. Such checkerboards can be mapped into a class of three-dimensional corner lenses of complementary bi-anisotropic media. △ Less

Submitted 20 November, 2012; originally announced November 2012.

Comments: 21 pages, 13 figures

Journal ref: J. Phys.: Condens. Matter, 25 (2013)

Periodically patterned columnar thin films as Blazed gratings

Authors: Jhuma Dutta, S. Anantha Ramakrishna, Akhlesh Lakhtakia

Abstract: Periodically patterned columnar thin films (PP-CTFs) were made by evaporating CaF2 and directing the vapor flux obliquely towards lithographically fabricated micrometer/sub-micrometer gratings. The growth of the PP-CTFs was controlled by the deposition rate to form prismatic air cavities within them and they function like blazed diffraction gratings with asymmetric diffraction patterns and diffrac… ▽ More Periodically patterned columnar thin films (PP-CTFs) were made by evaporating CaF2 and directing the vapor flux obliquely towards lithographically fabricated micrometer/sub-micrometer gratings. The growth of the PP-CTFs was controlled by the deposition rate to form prismatic air cavities within them and they function like blazed diffraction gratings with asymmetric diffraction patterns and diffraction efficiencies upto 52% in transmission at visible wavelengths. Scalar diffraction theory qualitatively explained the measured diffraction efficiencies. △ Less

Submitted 25 September, 2012; v1 submitted 24 September, 2012; originally announced September 2012.

Comments: 7 pages, 3 figures

Interface Induced Anisotropy and nematic glass/gel state in Jammed Aqueous Laponite Suspensions

Authors: A. Shahin, Yogesh M Joshi, S. Anantha Ramakrishna

Abstract: Aqueous suspensions of Laponite, a system composed of disk-like nanoparticles, are found to develop optical birefringence over several days, well after the suspensions solidified due to jamming. The optical anisotropy is particularly enhanced near the air Laponite suspension interface over length-scales of several millimetres, which is beyond five orders of magnitude larger than the particle lengt… ▽ More Aqueous suspensions of Laponite, a system composed of disk-like nanoparticles, are found to develop optical birefringence over several days, well after the suspensions solidified due to jamming. The optical anisotropy is particularly enhanced near the air Laponite suspension interface over length-scales of several millimetres, which is beyond five orders of magnitude larger than the particle length scale, suggestive of large scale ordering influenced by the interface. The orientational order increases with time and is always greater for higher concentration of salt, higher concentration of Laponite and higher temperature of the suspension. While weakly birefringent, Laponite suspensions covered by paraffin oil do not show any enhancement in the optical anisotropy near the interface compared to that in the bulk. We suggest that the expedited structure formation near the air interface propagating progressively inside the sample is responsible for the observed behaviour. We discuss the observed nematic ordering in the context of glasslike and gellike microstructure associated with aqueous Laponite suspensions. △ Less

Submitted 20 September, 2012; originally announced September 2012.

Comments: 31 pages 8 figures

Journal ref: Langmuir 2011, 27, 14045

Plasmonic interaction of light with negative index and gold nano-checkerboards

Authors: Sangeeta Chakrabarti, S. Anantha Ramakrishna, Neeraj Shukla, Fanny Guenneau, Muamer Kadic, Sebastien Guenneau, Stefan Enoch

Abstract: Negative refractive index materials (NRIM) make possible unique effects such as a convergent at lens due to the reversed Snell-Descartes laws of refraction. NRIM are also known to be able to support a host of surface plasmon states for both polarizations of light which are responsible for the sub-wavelength image resolution achieved by a slab of NRIM. A generalized lens theorem provides us with a… ▽ More Negative refractive index materials (NRIM) make possible unique effects such as a convergent at lens due to the reversed Snell-Descartes laws of refraction. NRIM are also known to be able to support a host of surface plasmon states for both polarizations of light which are responsible for the sub-wavelength image resolution achieved by a slab of NRIM. A generalized lens theorem provides us with a class of spatially varying slab lenses satisfying the prerequisite symmetries to fold the optical space onto itself. This theorem can be derived using powerful tools of transformational optics. A paradigm of such complementary media are checkerboards consisting of alternating cells of positive and negative refractive index that represent a very singular situation in which the local density of modes at the corners are enormously enhanced. We have considered several theoretical and numerical aspects of such structured films including a finite slabs of multi-scale checkerboards of NRIM satisfying the generalized lens theorem which are host of strongly enhanced electromagnetic feld. Such checkerboards can be mapped using transformational optics onto three-dimensional corner lenses consisting of semi-infinite heterogeneous anisotropic regions of space satisfying the generalized lens theorem. It is also possible to design three-dimensional checkerboards of complementary media, the only restriction being that corresponding unfolded structures in the plane are constrained by the four color theorem. Some of these meta-surfaces in the plane display thin bridges of complementary media, and this further enhances their plasmonic response. Since plasmonic metals mimic the behaviour of NRIM at small length scales, opaque gold films structured at sub-micron scales in a checkerboard fashion were fabricated using focussed-ion-beam technologies and their scattering spectra measured. △ Less

Submitted 18 February, 2011; originally announced February 2011.

Plasmonic space folding: focussing surface plasmons via negative refraction in complementary media

Authors: Muamer Kadic, Sebastien Guenneau, Stefan Enoch, S. Anantha Ramakrishna

Abstract: We extend designs of perfect lenses to the focussing of surface plasmon polaritons (SPPs) propagating at the interface between two anisotropic media of opposite permittivity sign. We identify the role played by the components of anisotropic and heterogeneous tensors of permittivity and permeability, deduced from a coordinate transformation, in the dispersion relation governing propagation of SPPs.… ▽ More We extend designs of perfect lenses to the focussing of surface plasmon polaritons (SPPs) propagating at the interface between two anisotropic media of opposite permittivity sign. We identify the role played by the components of anisotropic and heterogeneous tensors of permittivity and permeability, deduced from a coordinate transformation, in the dispersion relation governing propagation of SPPs. We illustrate our theory with three-dimensional finite element computations for focussing of SPPs by perfect flat and cylindrical lenses. △ Less

Submitted 19 November, 2010; originally announced November 2010.

Controlling Metamaterial Resonances with Light

Authors: Sangeeta Chakrabarti, S. Anantha Ramakrishna, Harshawardhan Wanare

Abstract: We investigate the use of coherent optical fields as a means of dynamically controlling the resonant behaviour of a variety of composite metamaterials, wherein the metamaterial structures are embedded in a dispersive dielectric medium. Control and switching is implemented by coherently driving the resonant permittivity of the embedding medium by applied optical radiation. The effect of embedding S… ▽ More We investigate the use of coherent optical fields as a means of dynamically controlling the resonant behaviour of a variety of composite metamaterials, wherein the metamaterial structures are embedded in a dispersive dielectric medium. Control and switching is implemented by coherently driving the resonant permittivity of the embedding medium by applied optical radiation. The effect of embedding Split ring resonators (SRR) in a frequency- dispersive medium with Lorentz-like dispersion or with dispersion engineered by electromagnetic induced transparency (EIT), is manifested in the splitting of the negative permeability band, the modified (frequency-dependent) filling fractions and dissipation factors. The modified material parameters are strongly linked to the resonant frequencies of the medium, while for an embedding medium exhibiting EIT, also to the strength and detuning of the control field. The robustness of control against the deleterious influence of dissipation associated with the metallic structures as well as the inhomogeneous broadening due to structural imperfections is demonstrated. Studies on plasmonic metamaterials that consist of metallic nanorods arranged in loops and exhibit a collective magnetic response at optical frequencies are presented. Control and switching in this class of plasmonic nanorod metamaterials is shown to be possible, for example, by embedding these arrays in a Raman active liquid like CS$_2$ and utilizing the Inverse Raman Effect. △ Less

Submitted 15 March, 2010; originally announced March 2010.

Comments: 9 pages, 9 figures

Switching a plasma-like metamaterial via embedded resonant atoms exhibiting electromagnetically induced transparency

Authors: Sangeeta Chakrabarti, S. Anantha Ramakrishna, Harshawardhan Wanare

Abstract: We theoretically demonstrate control of the plasma-like effective response of a metamaterial composed of aligned metallic nanorods when the electric field of the incident radiation is parallel to the nanorods. By embedding this metamaterial in a coherent atomic/molecular medium, for example silver nanorod arrays submerged in sodium vapor, we can make the metamaterial transmittive in the forbidde… ▽ More We theoretically demonstrate control of the plasma-like effective response of a metamaterial composed of aligned metallic nanorods when the electric field of the incident radiation is parallel to the nanorods. By embedding this metamaterial in a coherent atomic/molecular medium, for example silver nanorod arrays submerged in sodium vapor, we can make the metamaterial transmittive in the forbidden frequency region below its plasma frequency. This phenomenon is enabled by having Lorentz absorbers or other coherent processes like stimulated Raman absorption in the background medium which provide a large positive dielectric permittivity in the vicinity of the resonance, thereby rendering the effective permittivity positive. In particular, processes such as electromagnetically induced transparency are shown to provide additional control to switch and tune the new transmission bands. △ Less

Submitted 22 August, 2009; originally announced August 2009.

Comments: 9 pages, 3 figures

Journal ref: Optics Letters, 34, 3728 (2009)

Spectral shifts in the properties of a periodic multilayered stack due to isotropic chiral layers

Authors: S. Anantha Ramakrishna, Akhlesh Lakhtakia

Abstract: Investigating the canonical problem of a periodic multilayered stack containing isotropic chiral layers, we homogenized it as a uniaxial bianisotropic medium and derived its effective constitutive parameters. The stack shows a resonant behavior, when its unit cell consists of a metallic layer and an isotropic chiral layer. The presence of isotropic chirality can result in small shifts of the res… ▽ More Investigating the canonical problem of a periodic multilayered stack containing isotropic chiral layers, we homogenized it as a uniaxial bianisotropic medium and derived its effective constitutive parameters. The stack shows a resonant behavior, when its unit cell consists of a metallic layer and an isotropic chiral layer. The presence of isotropic chirality can result in small shifts of the resonance frequency for reasonably large values of the chirality parameter, implying that the sign of an effective permittivity can be switched. Such spectral shifts in the dielectric properties can be potentially useful for spectroscopic purposes. △ Less

Submitted 12 February, 2009; originally announced February 2009.

Comments: accepted for publication in J Opt A

Journal ref: J. Opt. A: Pure Appl. Opt. 11 (2009) 074001 (7pp)

Traversal of pulses through negative ($\varepsilon$, $μ$) materials

Authors: Lipsa Nanda, S. Anantha Ramakrishna

Abstract: We study the traversal times of electromagnetic pulses across dispersive media with negative dielectric permittivity ($\varepsilon$) and magnetic permeability ($μ$) parameters. First we investigate the transport of optical pulses through an electrical plasma and a negative refractive index medium (NRM) of infinite and semi-infinite extents where no resonant effects come into play. The total dela… ▽ More We study the traversal times of electromagnetic pulses across dispersive media with negative dielectric permittivity ($\varepsilon$) and magnetic permeability ($μ$) parameters. First we investigate the transport of optical pulses through an electrical plasma and a negative refractive index medium (NRM) of infinite and semi-infinite extents where no resonant effects come into play. The total delay time of the pulse constitutes of the group delay time and the resha** delay time as analyzed by Peatross et al \cite{peatross}. For evanescent waves, even with broadband width, the total delay time is negative for an infinite medium whereas it is positive for the semi-infinite case. Evidence of the Hartman effect is seen for small propagation distance compared to the free space pulse length. The resha** delay mostly dominates the total delay time in NRM whereas it vanishes when $\varepsilon(ω)=μ(ω)$. Next we present results on the propagation times through a dispersive slab. While both large bandwidth and large dissipation have similar effects in smoothening out the resonant features that appear due to Fabry-Pérot resonances, large dissipation can result in very small or even negative traversal times near the resonant frequencies. We investigate the traversal and the Wigner delay times for obliquely incident pulses. The coupling of evanescent waves to slab plasmon polariton modes results in large traversal times at the resonant conditions. We also find that the group velocity mainly contributes to the delay time for pulse propagating across a slab with refractive index (n) = -1. The traversal times are positive and subluminal for pulses with sufficiently large bandwidths. △ Less

Submitted 5 December, 2008; originally announced December 2008.

Comments: 12 pages,9 figures

Journal ref: Proc. of SPIE Vol. 6987, 69871Y, (2008)

Time for pulse traversal through slabs of dispersive and negative ($ε$, $μ$) materials

Authors: Lipsa Nanda, S. Anantha Ramakrishna

Abstract: The traversal times for an electromagnetic pulse traversing a slab of dispersive and dissipative material with negative dielectric permittivity ($ε$) and magnetic permeability ($μ$) have been calculated by using the average flow of electromagnetic energy in the medium. The effects of bandwidth of the pulse and dissipation in the medium have been investigated. While both large bandwidth and large… ▽ More The traversal times for an electromagnetic pulse traversing a slab of dispersive and dissipative material with negative dielectric permittivity ($ε$) and magnetic permeability ($μ$) have been calculated by using the average flow of electromagnetic energy in the medium. The effects of bandwidth of the pulse and dissipation in the medium have been investigated. While both large bandwidth and large dissipation have similar effects in smoothening out the resonant features that appear due to Fabry-Pérot resonances, large dissipation can result in very small or even negative traversal times near the resonant frequencies. We have also investigated the traversal times and Wigner delay times for obliquely incident pulses and evanescent pulses. The coupling to slab plasmon polariton modes in frequency ranges with negative $ε$ or $μ$ is shown to result in large traversal times at the resonant conditions. We also find that the group velocity mainly contributes to the delay times for pulse propagating across a slab with n=-1. We have checked that the traversal times are positive and subluminal for pulses with sufficiently large bandwidths. △ Less

Submitted 17 July, 2007; originally announced July 2007.

Comments: 9 pages, 9 figures, Submitted to Phys. Rev. A

Journal ref: Phys. Rev. A 76, 063807 (2007)

Meta-materials with negative refractive index at Optical Frequencies

Authors: S. Anantha Ramakrishna, Sangeeta Chakrabarti, Olivier J. F. Martin

Abstract: We demonstrate that arrays of split ring resonators (SRR) can have negative refractive index at optical frequencies (~1.4 eV). Our calculations reveal that the electric fields of radiation interact strongly with even symmetric SRR at optical frequencies as the size of the SRR becomes of the order of the wavelength (~lambda /3) for practicably realizable structures. We also demonstrate by calcula… ▽ More We demonstrate that arrays of split ring resonators (SRR) can have negative refractive index at optical frequencies (~1.4 eV). Our calculations reveal that the electric fields of radiation interact strongly with even symmetric SRR at optical frequencies as the size of the SRR becomes of the order of the wavelength (~lambda /3) for practicably realizable structures. We also demonstrate by calculations the focussing of a line source by a flat slab of a (2D) SRR medium. The negative refractive index here is related to the plasmonic excitations of the SRR and cannot be directly explained by the usual paradigm of negative dielectric permittivity and negative magnetic permeability in these limits when homogenization breaks down. △ Less

Submitted 1 March, 2007; originally announced March 2007.

Comments: 4 pages, 11 figures

Delay times and detector times for optical pulses traversing plasmas and negative refractive media

Authors: Lipsa Nanda, Aakash Basu, S. Anantha Ramakrishna

Abstract: We show that arrival times for electromagnetic pulses measured through the rate of absorption in an ideal impedance matched detector are equivalent to the arrival times using the average flow of optical energy as proposed by Peatross {\it et al.} [ Phys. Rev. Lett. {\bf 84}, 2370 (2000)]. We then investigate the transport of optical pulses through dispersive media with negative dielectric permit… ▽ More We show that arrival times for electromagnetic pulses measured through the rate of absorption in an ideal impedance matched detector are equivalent to the arrival times using the average flow of optical energy as proposed by Peatross {\it et al.} [ Phys. Rev. Lett. {\bf 84}, 2370 (2000)]. We then investigate the transport of optical pulses through dispersive media with negative dielectric permittivity and negative refractive index choosing the geometry such that no resonant effects come into play. For evanescent waves, the definitions of the group delay and the resha** delay get interchanged in comparison to propagating waves. The total delay times for the evanescent waves can be negative in an infinite plasma medium even for broad-band pulses. The total time is, however, positive for broad band pulses in the presence of an interface when the radiation is detected outside the plasma. We find evidence of the Hartman effect for pulses when the distance traversed in the plasma is much smaller than the free space pulse length. We also show that for a negative refractive index medium(NRM) with $ε(ω)$ = $μ(ω)$ the resha** delay for propagating waves is identically zero. The total delay time in NRM is otherwise dominated by the resha** delay time, and for broad band pulses in NRM the total delay time is subluminal. △ Less

Submitted 7 September, 2006; v1 submitted 29 April, 2006; originally announced May 2006.

Journal ref: Phys. Rev. E 74, 036601 (2006)

Resolving the wave-vector in negative refractive media: The sign of $\sqrt{Z}$

Authors: S. Anantha Ramakrishna, Olivier J. F. Martin

Abstract: We address the general issue of resolving the wave-vector in complex electromagnetic media including negative refractive media. This requires us to make a physical choice for the sign of a square-root imposed merely by conditions of causality. By considering the analytic behaviour of the wave-vector in the complex plane, it is shown that there are a total of eight physically distinct cases in th… ▽ More We address the general issue of resolving the wave-vector in complex electromagnetic media including negative refractive media. This requires us to make a physical choice for the sign of a square-root imposed merely by conditions of causality. By considering the analytic behaviour of the wave-vector in the complex plane, it is shown that there are a total of eight physically distinct cases in the four quadrants of two Riemann sheets. △ Less

Submitted 24 February, 2004; originally announced February 2004.

Comments: 3 pages, 2 figures, RevTeX

A spherical perfect lens

Authors: S. Anantha Ramakrishna, J. B. Pendry

Abstract: It has been recently proved that a slab of negative refractive index material acts as a perfect lens in that it makes accessible the sub-wavelength image information contained in the evanescent modes of a source. Here we elaborate on perfect lens solutions to spherical shells of negative refractive material where magnification of the near-field images becomes possible. The negative refractive ma… ▽ More It has been recently proved that a slab of negative refractive index material acts as a perfect lens in that it makes accessible the sub-wavelength image information contained in the evanescent modes of a source. Here we elaborate on perfect lens solutions to spherical shells of negative refractive material where magnification of the near-field images becomes possible. The negative refractive materials then need to be spatially dispersive with $ε(r) \sim 1/r$ and $μ(r)\sim 1/r$. We concentrate on lens-like solutions for the extreme near-field limit. Then the conditions for the TM and TE polarized modes become independent of $μ$ and $ε$ respectively. △ Less

Submitted 10 November, 2003; originally announced November 2003.

Comments: Revtex4, 9 pages, 2 figures (eps)

Focussing Light Using Negative Refraction

Authors: J. B. Pendry, S. Anantha Ramakrishna

Abstract: A slab of negatively refracting material, thickness d, can focus an image at a distance 2d from the object. The negative slab cancels an equal thickness of positive space. This result is a special case of a much wider class of focussing: any medium can be optically cancelled by an equal thickness of material constructed to be an inverted mirror image of the medium, with, $ε$ and $μ$ reversed in… ▽ More A slab of negatively refracting material, thickness d, can focus an image at a distance 2d from the object. The negative slab cancels an equal thickness of positive space. This result is a special case of a much wider class of focussing: any medium can be optically cancelled by an equal thickness of material constructed to be an inverted mirror image of the medium, with, $ε$ and $μ$ reversed in sign. We introduce the powerful technique of coordinate transformation, map** a known system into an equivalent system, to extend the result to a much wider class of structures including cylinders, spheres, and intersecting planes and hence show how to produce magnified images. All the images are perfect in the sense that both the near and far fields are brought to a focus and hence reveal sub wavelength details. △ Less

Submitted 15 October, 2003; originally announced October 2003.

Comments: pdf file only

Journal ref: J. Phys.: Condens. Matter, Vol. 15, 6345, (2003)

Imaging the Near Field

Authors: S. Anantha Ramakrishna, J. B. Pendry, M. C. K Wiltshire, W. J. Stewart

Abstract: In an earlier paper we introduced the concept of the perfect lens which focuses both near and far electromagnetic fields, hence attaining perfect resolution. Here we consider refinements of the original prescription designed to overcome the limitations of imperfect materials. In particular we show that a multi-layer stack of positive and negative refractive media is less sensitive to imperfectio… ▽ More In an earlier paper we introduced the concept of the perfect lens which focuses both near and far electromagnetic fields, hence attaining perfect resolution. Here we consider refinements of the original prescription designed to overcome the limitations of imperfect materials. In particular we show that a multi-layer stack of positive and negative refractive media is less sensitive to imperfections. It has the novel property of behaving like a fibre-optic bundle but one that acts on the near field, not just the radiative component. The effects of retardation are included and minimized by making the slabs thinner. Absorption then dominates image resolution in the near-field. The deleterious effects of absorption in the metal are reduced for thinner layers. △ Less

Submitted 1 July, 2002; originally announced July 2002.

Comments: RevTeX, (9 pages, 8 figures)

Journal ref: J. Mod. Optics, Vol. 50, pp. 1419-1430 (2003)

Limitations on Sub-Diffraction Imaging with a Negative Refractive Index Slab

Authors: D. R. Smith, D. Schurig, Marshall Rosenbluth, S. Schultz, S. Anantha Ramakrishna, J. B. Pendry

Abstract: Recently it has been proposed that a planar slab of material, for which both the permittivity and permeability have the values of -1, could bring not only the propagating fields associated with a source to a focus, but could also refocus the nonpropagating near-fields, thereby achieving a subdiffraction image. In this work we discuss the sensitivity of the subwavelength focus to various slab par… ▽ More Recently it has been proposed that a planar slab of material, for which both the permittivity and permeability have the values of -1, could bring not only the propagating fields associated with a source to a focus, but could also refocus the nonpropagating near-fields, thereby achieving a subdiffraction image. In this work we discuss the sensitivity of the subwavelength focus to various slab parameters, pointing out the connection to slab plasmon modes. We also note and resolve a paradox associated with the perfect imaging of a point source. We conclude that subwavelength resolution is achievable with available technology, but only by implementation of a critical set of design parameters. △ Less

Submitted 28 June, 2002; originally announced June 2002.

Comments: pdf file

Journal ref: Appl. Phys. Lett. 82, 1506-1508 (2003)

Near Field Lenses in Two Dimensions

Authors: J. B. Pendry, S. Anantha Ramakrishna

Abstract: It has been shown that a slab of materials with refractive index = -1 behaves like a perfect lens focussing all light to an exact electromagnetic copy of an object. The original lens is limited to producing images the same size as the object, but here we generalise the concept so that images can be magnified. For two dimensional systems, over distances much shorter than the free space wavelength… ▽ More It has been shown that a slab of materials with refractive index = -1 behaves like a perfect lens focussing all light to an exact electromagnetic copy of an object. The original lens is limited to producing images the same size as the object, but here we generalise the concept so that images can be magnified. For two dimensional systems, over distances much shorter than the free space wavelength, we apply conformal transformations to the original parallel sided slab generating a variety of new lenses. Although the new lenses are not `perfect' they are able to magnify two dimensional objects. The results apply equally to imaging of electric or magnetic sub wavelength objects in two dimensions. The concepts have potential applications ranging from microwave frequencies to the visible. △ Less

Submitted 28 June, 2002; originally announced June 2002.

Comments: PDF file

Journal ref: J. Phys.: Condens. Matter, Vol. 14, No. 36, pp. 8463-8479, (2002).

Optical gain removes absorption and increases resolution in a near-field lens

Authors: S. Anantha Ramakrishna, J. B. Pendry

Abstract: A recent paper showed how to construct a lens that focuses near field radiation and hence produce resolution unlimited by wavelength. The prescription requires lossless materials with negative refractive index: finite loss cuts off the finer details of the image. In this paper we suggest compensating for losses by introducing optical gain media into the lens design. Calculations demonstrate a dr… ▽ More A recent paper showed how to construct a lens that focuses near field radiation and hence produce resolution unlimited by wavelength. The prescription requires lossless materials with negative refractive index: finite loss cuts off the finer details of the image. In this paper we suggest compensating for losses by introducing optical gain media into the lens design. Calculations demonstrate a dramatic improvement in performance for a silver/gain composite medium at optical frequencies. △ Less

Submitted 28 June, 2002; originally announced June 2002.

Comments: RevTeX4, 4 pages

Journal ref: Phys. Rev. B Vol. 67, 201101(R), (2003)

The asymmetric lossy near-perfect lens

Authors: S. Anantha Ramakrishna, J. B. Pendry, D. Schurig, D. R. Smith, S. Schultz

Abstract: We extend the ideas of the recently proposed perfect lens [J.B. Pendry, Phys. Rev. Lett. {\bf 85}, 3966 (2000)] to an alternative structure. We show that a slab of a medium with negative refractive index bounded by media of different positive refractive index also amplifies evanescent waves and can act as a near-perfect lens. We examine the role of the surface states in the amplification of the… ▽ More We extend the ideas of the recently proposed perfect lens [J.B. Pendry, Phys. Rev. Lett. {\bf 85}, 3966 (2000)] to an alternative structure. We show that a slab of a medium with negative refractive index bounded by media of different positive refractive index also amplifies evanescent waves and can act as a near-perfect lens. We examine the role of the surface states in the amplification of the evanescent waves. The image resolution obtained by this asymmetric lens is more robust against the effects of absorption in the lens. In particular, we study the case of a slab of silver, which has negative dielectric constant, with air on one side and other media such as glass or GaAs on the other side as an `asymmetric' lossy near-perfect lens for P-polarized waves. It is found that retardation has an adverse effect on the imaging due to the positive magnetic permeability of silver, but we conclude that subwavelength image resolution is possible inspite of it. △ Less

Submitted 28 June, 2002; originally announced June 2002.

Comments: RevTeX, To appear in J. Mod. Optics

Journal ref: J. Mod. Optics, Vol. 49, pp. 1747-1762 (2002)

Propagating and evanescent waves in absorbing media

Authors: S. Anantha Ramakrishna, A. D. Armour

Abstract: We compare the behavior of propagating and evanescent light waves in absorbing media with that of electrons in the presence of inelastic scattering. The imaginary part of the dielectric constant results primarily in an exponential decay of a propagating wave, but a phase shift for an evanescent wave. We then describe how the scattering of quantum particles out of a particular coherent channel ca… ▽ More We compare the behavior of propagating and evanescent light waves in absorbing media with that of electrons in the presence of inelastic scattering. The imaginary part of the dielectric constant results primarily in an exponential decay of a propagating wave, but a phase shift for an evanescent wave. We then describe how the scattering of quantum particles out of a particular coherent channel can be modeled by introducing an imaginary part to the potential in analogy with the optical case. The imaginary part of the potential causes additional scattering which can dominate and actually prevent absorption of the wave for large enough values of the imaginary part. We also discuss the problem of maximizing the absorption of a wave and point out that the existence of a bound state greatly aids absorption. We illustrate this point by considering the absorption of light at the surface of a metal. △ Less

Submitted 10 January, 2003; v1 submitted 7 June, 2002; originally announced June 2002.

Comments: Brief Review, to appear in the American Journal of Physics, http://www.kzoo.edu/ajp/

Journal ref: Am. J. Phys. 71, 562 (2003)

The conditional tunneling time for reflection using the WKB wave-function

Authors: S. Anantha Ramakrishna, A. M. Jayannavar

Abstract: We derive an expression for the conditional time for the reflection of a wave from an arbitrary potential barrier using the WKB wavefunction in the barrier region. Our result indicates that the conditional times for transmission and reflection are equal for a symmetric barrier within the validity of the WKB approach. We derive an expression for the conditional time for the reflection of a wave from an arbitrary potential barrier using the WKB wavefunction in the barrier region. Our result indicates that the conditional times for transmission and reflection are equal for a symmetric barrier within the validity of the WKB approach. △ Less

Submitted 8 March, 2002; originally announced March 2002.

Comments: 4 pages RevTeX, 1 eps figure included

Journal ref: Int. J. Mod. Phys. B Vol. 16, 615 (2002)

Distribution of the delay time and the dwell time for wave reflection from a long random potential

Authors: S. Anantha Ramakrishna, N. Kumar

Abstract: We re-examine and correct an earlier derivation of the distribution of the Wigner phase delay time for wave reflection from a long one-dimensional disordered conductor treated in the continuum limit. We then numerically compare the distributions of the Wigner phase delay time and the dwell time, the latter being obtained by the use of an infinitesimal imaginary potential as a clock, and investig… ▽ More We re-examine and correct an earlier derivation of the distribution of the Wigner phase delay time for wave reflection from a long one-dimensional disordered conductor treated in the continuum limit. We then numerically compare the distributions of the Wigner phase delay time and the dwell time, the latter being obtained by the use of an infinitesimal imaginary potential as a clock, and investigate the effects of strong disorder and a periodic (discrete) lattice background. We find that the two distributions coincide even for strong disorder, but only for energies well away from the band-edges. △ Less

Submitted 20 November, 2001; v1 submitted 11 June, 2001; originally announced June 2001.

Comments: Final version with minor corrections in text, 4 pages, 2 PS figures

Journal ref: Euro. Phys. J. B 23, 509-513 (2001)

Correcting the quantum clock: conditional sojourn times

Authors: S. Anantha Ramakrishna, N. Kumar

Abstract: Can the quantum-mechanical sojourn time be clocked without the clock affecting the sojourn time? Here we re-examine the previously proposed non-unitary clock, involving absorption/amplification by an added infinitesimal imaginary potential($iV_{i}$), and find it {\it not} to preserve, in general, the positivity of the sojourn time, conditional on eventual reflection or transmission. The sojourn… ▽ More Can the quantum-mechanical sojourn time be clocked without the clock affecting the sojourn time? Here we re-examine the previously proposed non-unitary clock, involving absorption/amplification by an added infinitesimal imaginary potential($iV_{i}$), and find it {\it not} to preserve, in general, the positivity of the sojourn time, conditional on eventual reflection or transmission. The sojourn time is found to be affected by the scattering concomitant with the mismatch, however small, due to the very clock potential($iV_{i}$) introduced for the purpose, as also by any prompt scattering involving partial waves that have not traversed the region of interest. We propose a formal procedure whereby the sojourn time so clocked can be corrected for these spurious scattering effects. The resulting conditional sojourn times are then positive definite for an arbitrary potential, and have the proper high- and low-energy limits. △ Less

Submitted 6 March, 2001; v1 submitted 19 September, 2000; originally announced September 2000.

Comments: Corrected and rewritten, RevTeX, 4 pages, 2 figures (ps files) included

Journal ref: Europhys. Lett., Vol. 60, pp. 491-497 (2002)

Diffusion at constant speed in a model phase space

Authors: S. Anantha Ramakrishna, N. Kumar

Abstract: We reconsider the problem of diffusion of particles at constant speed and present a generalization of the Telegrapher process to higher dimensional stochastic media ($d>1$), where the particle can move along $2^d$ directions. We derive the equations for the probability density function using the ``formulae of differentiation'' of Shapiro and Loginov. The model is an advancement over similiar mod… ▽ More We reconsider the problem of diffusion of particles at constant speed and present a generalization of the Telegrapher process to higher dimensional stochastic media ($d>1$), where the particle can move along $2^d$ directions. We derive the equations for the probability density function using the ``formulae of differentiation'' of Shapiro and Loginov. The model is an advancement over similiar models of photon migration in multiply scattering media in that it results in a true diffusion at constant speed in the limit of large dimensions. △ Less

Submitted 9 October, 2002; v1 submitted 30 June, 2000; originally announced June 2000.

Comments: Final corrected version RevTeX, 6 pages, 1 figure

Journal ref: Int. J. Mod. Phys. B, Vol. 16, No. 24, pp. 3715-3723 (2002)

Super-reflection of light from a random amplifying medium with disorder in the complex refractive index : Statistics of fluctuations

Authors: S. Anantha Ramakrishna, E. Krishna Das, G. V. Vijayagovindan, N. Kumar

Abstract: The probability distribution of the reflection coefficient for light reflected from a one-dimensional random amplifying medium with {\it cross-correlated} spatial disorder in the real and the imaginary parts of the refractive index is derived using the method of invariant imbedding. The statistics of fluctuations have been obtained for both the correlated telegraph noise and the Gaussian white-n… ▽ More The probability distribution of the reflection coefficient for light reflected from a one-dimensional random amplifying medium with {\it cross-correlated} spatial disorder in the real and the imaginary parts of the refractive index is derived using the method of invariant imbedding. The statistics of fluctuations have been obtained for both the correlated telegraph noise and the Gaussian white-noise models for the disorder. In both cases, an enhanced backscattering (super-reflection with reflection coefficient greater than unity) results because of coherent feedback due to Anderson localization and coherent amplification in the medium. The results show that the effect of randomness in the imaginary part of the refractive index on localization and super-reflection is qualitatively different. △ Less

Submitted 21 August, 1999; originally announced August 1999.

Comments: RevTex 6 pages, 3 figures in ps files

Journal ref: Phys.Rev. B62, 256-261 (2000)

Imaginary Potential as a Counter of Delay Time for Wave Reflection from a 1D Random Potential

Authors: S. Anantha Ramakrishna, N. Kumar

Abstract: We show that the delay time distribution for wave reflection from a one-dimensional random potential is related directly to that of the reflection coefficient, derived with an arbitrarily small but uniform imaginary part added to the random potential. Physically, the reflection coefficient, being exponential in the time dwelt in the presence of the imaginary part, provides a natural counter for… ▽ More We show that the delay time distribution for wave reflection from a one-dimensional random potential is related directly to that of the reflection coefficient, derived with an arbitrarily small but uniform imaginary part added to the random potential. Physically, the reflection coefficient, being exponential in the time dwelt in the presence of the imaginary part, provides a natural counter for it. The delay time distribution then follows straightforwardly from our earlier results for the reflection coefficient, and coincides with the distribution obtained recently by Texier and Comtet [C.Texier and A. Comtet, Phys.Rev.Lett. {\bf 82}, 4220 (1999)],with all moments infinite. Delay time distribution for a random amplifying medium is then derived . In this case, however, all moments work out to be finite. △ Less

Submitted 14 November, 1999; v1 submitted 7 June, 1999; originally announced June 1999.

Comments: 4 pages, RevTeX, replaced with added proof, figure and references. To appear in Phys. Rev. B Jan01 2000

Journal ref: Phys. Rev. B 61, 3163 (2000)

Estimation of light transport parameters in biological media using coherent backscattering

Authors: S. Anantha Ramakrishna, K. Divakara Rao

Abstract: The suitability of using the angular peak shape of the coherent backscattered light for estimating the light transport parameters of biological media has been investigated. Milk and methylene blue doped milk were used as tissue phantoms for the measurements carried out with a He-Ne laser (632.8nm). Results indicate that while the technique accurately estimates the transport length, it can determ… ▽ More The suitability of using the angular peak shape of the coherent backscattered light for estimating the light transport parameters of biological media has been investigated. Milk and methylene blue doped milk were used as tissue phantoms for the measurements carried out with a He-Ne laser (632.8nm). Results indicate that while the technique accurately estimates the transport length, it can determine the absorption coefficient only when the absorption is moderately high ($α> 1 cm^{-1}$) for the long transport lengths typical of tissues. Further, the possibility of determining the anisotropy factor by estimating the single scattering contribution to the diffuse background is examined. △ Less

Submitted 4 December, 1999; v1 submitted 29 April, 1999; originally announced April 1999.

Comments: Revtex 8 pages, 6 figures in PS files, Pramana J. Phys. (To Appear)

Journal ref: Pramana J. Phys., Vol.54, pp. 255-267 (2000).

Diffusion of particles moving with constant speed

Authors: S. Anantha Ramakrishna, N. Kumar

Abstract: The propagation of light in a scattering medium is described as the motion of a special kind of a Brownian particle on which the fluctuating forces act only perpendicular to its velocity. This enforces strictly and dynamically the constraint of constant speed of the photon in the medium. A Fokker-Planck equation is derived for the probability distribution in the phase space assuming the transver… ▽ More The propagation of light in a scattering medium is described as the motion of a special kind of a Brownian particle on which the fluctuating forces act only perpendicular to its velocity. This enforces strictly and dynamically the constraint of constant speed of the photon in the medium. A Fokker-Planck equation is derived for the probability distribution in the phase space assuming the transverse fluctuating force to be a white noise. Analytic expressions for the moments of the displacement $<x^{n}>$ along with an approximate expression for the marginal probability distribution function $P(x,t)$ are obtained. Exact numerical solutions for the phase space probability distribution for various geometries are presented. The results show that the velocity distribution randomizes in a time of about eight times the mean free time ($8t^*$) only after which the diffusion approximation becomes valid. This factor of eight is a well known experimental fact. A persistence exponent of $0.435 \pm 0.005$ is calculated for this process in two dimensions by studying the survival probability of the particle in a semi-infinite medium. The case of a stochastic amplifying medium is also discussed. △ Less

Submitted 1 March, 1999; originally announced March 1999.

Comments: 9 pages, 9 figures(Submitted to Phys. Rev. E)

Journal ref: Phys. Rev. E 60, 1381 (1999).

Photon transport in thin disordered slabs

Authors: Venkatesh Gopal, S. Anantha Ramakrishna, A. K. Sood, N. Kumar

Abstract: We examine using Monte Carlo simulations, photon transport in optically `thin' slabs whose thickness L is only a few times the transport mean free path $l^{*}$, with particles of different scattering anisotropies. The confined geometry causes an auto-selection of only photons with loo** paths to remain within the slab. The results of the Monte Carlo simulations are borne out by our analytical… ▽ More We examine using Monte Carlo simulations, photon transport in optically `thin' slabs whose thickness L is only a few times the transport mean free path $l^{*}$, with particles of different scattering anisotropies. The confined geometry causes an auto-selection of only photons with loo** paths to remain within the slab. The results of the Monte Carlo simulations are borne out by our analytical treatment which incorporates the directional persistence by the use of the Ornstein-Uhlenbeck process, which interpolates between the short time ballistic and long time diffusive regimes. △ Less

Submitted 31 May, 2001; v1 submitted 1 March, 1999; originally announced March 1999.

Comments: 4 figures as PS files

Journal ref: Pramana J. Phys., Vol. 56, 767-778 (2001)