-
Stretched Non-negative Matrix Factorization
Authors:
Ran Gu,
Yevgeny Rakita,
Ling Lan,
Zach Thatcher,
Gabrielle E. Kamm,
Daniel O'Nolan,
Brennan Mcbride,
Allison Wustrow,
James R. Neilson,
Karena W. Chapman,
Qiang Du,
Simon J. L. Billinge
Abstract:
An algorithm is described and tested that carries out a non negative matrix factorization (NMF) ignoring any stretching of the signal along the axis of the independent variable. This extended NMF model is called StretchedNMF. Variability in a set of signals due to this stretching is then ignored in the decomposition. This can be used, for example, to study sets of powder diffraction data collected…
▽ More
An algorithm is described and tested that carries out a non negative matrix factorization (NMF) ignoring any stretching of the signal along the axis of the independent variable. This extended NMF model is called StretchedNMF. Variability in a set of signals due to this stretching is then ignored in the decomposition. This can be used, for example, to study sets of powder diffraction data collected at different temperatures where the materials are undergoing thermal expansion. It gives a more meaningful decomposition in this case where the component signals resemble signals from chemical components in the sample. The StretchedNMF model introduces a new variable, the stretching factor, to describe any expansion of the signal. To solve StretchedNMF, we discretize it and employ Block Coordinate Descent framework algorithms. The initial experimental results indicate that StretchedNMF model outperforms the conventional NMF for sets of data with such an expansion. A further enhancement to StretchedNMF for the case of powder diffraction data from crystalline materials called Sparse-StretchedNMF, which makes use of the sparsity of the powder diffraction signals, allows correct extractions even for very small stretches where StretchedNMF struggles. As well as demonstrating the model performance on simulated PXRD patterns and atomic pair distribution functions (PDFs), it also proved successful when applied to real data taken from an in situ chemical reaction experiment.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Map** Structural Heterogeneity at the Nanoscale with Scanning Nano-structure Electron Microscopy (SNEM)
Authors:
Yevgeny Rakita,
James L. Hart,
Partha Pratim Das,
Daniel L. Foley,
Stavros Nicolopoulos,
Sina Shahrezaei,
Suveen Nigel Mathaudhu,
Mitra L. Taheri,
Simon J. L. Billinge
Abstract:
Here we explore the use of scanning electron diffraction coupled with electron atomic pair distribution function analysis (ePDF) to understand the local order as a function of position in a complex multicomponent system, a hot rolled, Ni-encapsulated, Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ bulk metallic glass (BMG), with a spatial resolution of 3 nm. We show that it is possible to gain insight in…
▽ More
Here we explore the use of scanning electron diffraction coupled with electron atomic pair distribution function analysis (ePDF) to understand the local order as a function of position in a complex multicomponent system, a hot rolled, Ni-encapsulated, Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ bulk metallic glass (BMG), with a spatial resolution of 3 nm. We show that it is possible to gain insight into the chemistry and chemical clustering/ordering tendency in different regions of the sample, including in the vicinity of nano-scale crystallites that are identified from virtual dark field images and in heavily deformed regions at the edge of the BMG. In addition to simpler analysis, unsupervised machine learning was used to extract partial PDFs from the material, modeled as a quasi-binary alloy, and map them in space. These maps allowed key insights not only into the local average composition, as validated by EELS, but also a unique insight into chemical short-range ordering tendencies in different regions of the sample during formation. The experiments are straightforward and rapid and, unlike spectroscopic measurements, don't require energy filters on the instrument. We spatially map different quantities of interest (QoI's), defined as scalars that can be computed directly from positions and widths of ePDF peaks or parameters refined from fits to the patterns. We developed a flexible and rapid data reduction and analysis software framework that allows experimenters to rapidly explore images of the sample on the basis of different QoI's. The power and flexibility of this approach are explored and described in detail. Because of the fact that we are getting spatially resolved images of the nanoscale structure obtained from ePDFs we call this approach scanning nano-structure electron microscopy (SNEM), and we believe that it will be powerful and useful extension of current 4D-STEM methods.
△ Less
Submitted 25 August, 2022; v1 submitted 7 October, 2021;
originally announced October 2021.
-
The pursuit of stability in halide perovskites: the monovalent cation and the key for surface and bulk self-repair
Authors:
D R Ceratti,
A V Cohen,
R Tenne,
Y Rakita,
L Snarski,
L Cremonesi,
I Goldian,
I Kaplan-Ashiri,
T Bendikov,
V Kalchenko,
M Elbaum,
M A C Potenza,
L Kronik,
G Hodes,
D Cahen
Abstract:
We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging micros…
▽ More
We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging microscopy, as well as results from several other methods, relate the (damaged) state of the halide perovskite (HaP) after photobleaching to its modified optical and electronic properties. The A cation type strongly influences both the kinetics and the thermodynamics of recovery and degradation: FA heals best the bulk material with faster self-healing; Cs+ protects the surface best, being the least volatile of the A cations and possibly through O-passivation; MA passivates defects via methylamine from photo-dissociation, which binds to Pb2+. DFT simulations not only provide insight into the latter conclusion, but also show the importance and stability of the Br3- defect. These results rationalize the use of mixed A-cation materials for optimizing both solar cell stability and overall performance of HaP-based devices, and provide a basis for designing new HaP variants.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
The tetragonal phase of CH$_{3}$NH$_{3}$PbI$_{3}$ is strongly anharmonic
Authors:
Rituraj Sharma,
Zhenbang Dai,
Lingyuan Gao,
Thomas M. Brenner,
Lena Yadgarov,
Jiahao Zhang,
Yevgeny Rakita,
Roman Korobko,
Andrew M. Rappe,
Omer Yaffe
Abstract:
Halide perovskite (HP) semiconductors exhibit unique strong coupling between the electronic and structural dynamics. The high-temperature cubic phase of HPs is known to be entropically stabilized, with imaginary frequencies in the calculated phonon dispersion relation. Similar calculations, based on the static average crystal structure, predict a stable tetragonal phase with no imaginary modes. Th…
▽ More
Halide perovskite (HP) semiconductors exhibit unique strong coupling between the electronic and structural dynamics. The high-temperature cubic phase of HPs is known to be entropically stabilized, with imaginary frequencies in the calculated phonon dispersion relation. Similar calculations, based on the static average crystal structure, predict a stable tetragonal phase with no imaginary modes. This work shows that in contrast to standard theory predictions, the room-temperature tetragonal phase of CH$_{3} $NH$_{3} $PbI$_{3}$ is strongly anharmonic. We use Raman polarization-orientation (PO) measurements and \textit{ab initio} molecular dynamics (AIMD) to investigate the origin and temperature evolution of the strong structural anharmonicity throughout the tetragonal phase. Raman PO measurements reveal a new spectral feature that resembles a soft mode. This mode shows an unusual continuous increase in dam** with temperature which is indicative of an anharmonic potential surface. The analysis of AIMD trajectories identifies two major sources of anharmonicity: the orientational unlocking of the [CH$_{3} $NH$_{3}$]$^+$ ions and large amplitude octahedral tilting that continuously increases with temperature. Our work suggests that the standard phonon picture cannot describe the structural dynamics of tetragonal CH$_{3} $NH$_{3} $PbI$_{3}$.
△ Less
Submitted 15 May, 2020; v1 submitted 13 January, 2020;
originally announced January 2020.
-
Halide perovskites under polarized light: Vibrational symmetry analysis using polarized Raman
Authors:
Rituraj Sharma,
Matan Menahem,
Zhenbang Dai,
Lingyuan Gao,
Thomas M. Brenner,
Lena Yadgarov,
Jiahao Zhang,
Yevgeny Rakita,
Roman Korobko,
Iddo Pinkas,
Andrew M. Rappe,
Omer Yaffe
Abstract:
In the last decade, hybrid organic-inorganic halide perovskites have emerged as a new type of semiconductor for photovoltaics and other optoelectronic applications. Unlike standard, tetrahedrally bonded semiconductors (e.g. Si and GaAs), the ionic thermal fluctuations in the halide perovskites (i.e. structural dynamics) are strongly coupled to the electronic dynamics. Therefore, it is crucial to o…
▽ More
In the last decade, hybrid organic-inorganic halide perovskites have emerged as a new type of semiconductor for photovoltaics and other optoelectronic applications. Unlike standard, tetrahedrally bonded semiconductors (e.g. Si and GaAs), the ionic thermal fluctuations in the halide perovskites (i.e. structural dynamics) are strongly coupled to the electronic dynamics. Therefore, it is crucial to obtain accurate and detailed knowledge about the nature of atomic motions within the crystal. This has proved to be challenging due to low thermal stability and the complex, temperature dependent structural phase sequence of the halide perovskites. Here, these challenges are overcome and a detailed analysis of the mode symmetries is provided in the low-temperature orthorhombic phase of methylammonium-lead iodide. Raman measurements using linearly- and circularly- polarized light at 1.16 eV excitation are combined with density functional perturbation theory (DFPT). By performing an iterative analysis of Raman polarization-orientation dependence and DFPT mode analysis, the crystal orientation is determined. Subsequently, accounting for birefringence effects detected using circularly polarized light excitation, the symmetries of all the observed Raman-active modes at 10 K are assigned.
△ Less
Submitted 8 December, 2019; v1 submitted 1 December, 2019;
originally announced December 2019.
-
Type and Degree of Covalence: Empirical Derivation and Implications
Authors:
Yevgeny Rakita,
Thomas Kirchartz,
Gary Hodes,
David Cahen
Abstract:
The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usu…
▽ More
The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usually viewed as forces that attract between atoms to form a rigid structure. Although less common for solid materials, it was shown theoretically to be possible for covalent interactions at the chemically-active electronic shell (or valence-band maximum) of semiconductors to reverse their more common nature and become repulsive, i.e., act against bonding. Some semiconductors with such predicted anti-bonding valence-band maximum levels (such as halide perovskites) show experimentally some amazing (opto-) electronic properties. Predictions that anti-bonding character can allow tolerance for existing defects, at least in part, can explain the superior properties of such semiconductors. Although there are known experimental ways to estimate the degree of the covalent nature (e.g., electronegativity), this was not possible hitherto for the type, i.e., distinguishing whether a material exhibits bonding or anti-bonding covalent interactions. We have developed a simple way to reveal the complete nature (both type and degree) of chemical bonds, using experimental data. After confirming our development with classical models and theoretical predictions, with a set of ~40 different functional semi-conductors, we show how knowledge of the complete nature of covalent bonding is of critical importance for fundamental properties of semiconductors.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Between Structure and Performance in Halide Perovskites for Photovoltaic Applications: the Role of Defects
Authors:
Yevgeny Rakita,
David Cahen,
Gary Hodes
Abstract:
My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties.
* I present my main research model: HaP single-crystals - their growth and characterization;
* I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques.
* I explore the 'deformation…
▽ More
My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties.
* I present my main research model: HaP single-crystals - their growth and characterization;
* I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques.
* I explore the 'deformation potential' of the structure and show that its low and positive value in HaPs strongly suggests a pronounced 'defect tolerance'.
* I explore the scattering mechanism of charges in the soft and highly polarizable system such as HaPs, and show that its low mobility (relative to other heteropolar systems) is fundamental and cannot be improved. I also show that a positive 'deformation potential' (so the valence band is 'anti-bonding', where a system should promote 'defect-tolerance') is something that is common to other highly polarizable systems, such as AgX, and Pb-chalcogenides.
* I explore the chemistry of the system and show that HaPs can easily break to constituents, but also easily be made by the same constituents, suggesting a low activation energy for annealing process to take care even at RT. This RT annealing can promote 'self-healing' at ~second to ~minute time-scale, which we clearly observe. We find 'entropic-stabilization' to be very important in 'self-healing' processes of that kind.
* I explore the importance of symmetry breaking in the HaP structure, which can induce a polar - and thus Ferroelectric - structure. We conclude that Ferroelectricity is not a fundamental property of HaPs, since it doesn't exist in MAPbBr3, but only in MAPbI3 - as proven unambiguously - and what is present in MAPbI3 is in doubt important for photovoltaics, when using them at RT or above.
Due to compression, if you find a low-quality figure you want- please email me.
△ Less
Submitted 28 September, 2018;
originally announced September 2018.
-
Tetragonal CH3NH3PbI3 Is Ferroelectric
Authors:
Yevgeny Rakita,
Omri Bar-Elli,
Elena Meirzadeh,
Hadar Kaslasi,
Yagel Peleg,
Gary Hodes,
Igor Lubo-mirsky,
Dan Oron,
David Ehre,
David Cahen
Abstract:
Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatia…
▽ More
Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatial separation of electrons and holes, a possibility if MAPbI3 is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step we show that, in operando, MAPbI3 (unlike MAPbBr3) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material s relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion!) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop to prove ferroelctricity s hallmark for switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI3, we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is the room temperature stable phase). Using chemical etching, we also image polar domains, the structural fingerprint for ferroelectricity, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second-harmonic generation, direct evidence for the material s non-centrosymmetry. We note that the material s ferroelectric nature, can, but not obviously need to be important in a PV cell, operating around room temperature.
△ Less
Submitted 17 February, 2017;
originally announced February 2017.
-
Mechanical Properties of APbX3 (A=Cs or CH3NH3; X=I or Br) Perovskite Single Crystals
Authors:
Yevgeny Rakita,
Sidney R. Cohen,
Nir Klein Kedem,
Gary Hodes,
David Cahen
Abstract:
The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 G…
▽ More
The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 GPa, for CH3NH3PbI3, CH3NH3PbBr3 and CsPbBr3, respectively, lending credence to theoretically calculated values. We discuss possible relevance of our results to suggested self-healing, ion diffusion and ease of manufacturing. Using our results, together with literature data on elastic moduli, we classified HOIPs amongst relevant materials groups, based on their elasto-mechanical properties.
△ Less
Submitted 17 August, 2015;
originally announced August 2015.