Showing 1–50 of 61 results for author: Rai, R

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Heterostructures

Authors: Da Lin, Jason Lynch, Sudong Wang, Zekun Hu, Rajeev Kumar Rai, Huairuo Zhang, Chen Chen, Shalini Kumari, Eric Stach, Albert V. Davydov, Joan M. Redwing, Deep Jariwala

Abstract: Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experime… ▽ More Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition metal dichalcogenides (TMDCs). We experimentally demonstrate an average total absorption in the visible range (450 nm - 700 nm) of > 70% using > 4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency (PCE) of 15.54% and a specific power > 300 W g^-1 may be achieved in a photovoltaic cell based on this metamaterial absorber. △ Less

Submitted 6 July, 2024; originally announced July 2024.

AutoMRISimQA: an automated system for daily quality control of a 3T MRI simulator

Authors: Aitang Xing, Gary Goozee, Gary Liney, Sankar Arumugam, Shrikant Deshpande, Anthony Espinoza, Alison Gray, Vasilis Kondilis, Doaa Elwadia, Robba Rai, Lois Holloway

Abstract: A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accurac… ▽ More A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accuracy as well as the external lasers quantitatively. It was implemented into the daily clinically workflow in 2013 and has been used for more than 10 years. It was also seamlessly integrated with QAtrack, allowing continuous monitoring of the consistency of the MRI simulator's performance. △ Less

Submitted 29 March, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: Accepted by conference ICCR 2024

Study of nanodiamond photocathodes for MPGD-based detectors of single photons

Authors: F. M. Brunbauer, C. Chatterjee, G. Cicala, A. Cicuttin, M. L. Crespo, D. D'Ago, S. Dalla Torre, S. Dasgupta, M. Gregori, S. Levorato, T. Ligonzo, M. Lisowska, M. S. Leone, R. Rai, L. Ropelewski, F. Tessarotto, Triloki, A. Valentini, L. Velardi

Abstract: The proposed new Electron-Ion Collider poses a technical and intellectual challenge for the detector design to accommodate the long-term diverse physics goals envisaged by the program. This requires a 4π detector system capable of reconstructing the energy and momentum of final state particles with high precision. The Electron-Ion Collider also requires identification of particles of different mas… ▽ More The proposed new Electron-Ion Collider poses a technical and intellectual challenge for the detector design to accommodate the long-term diverse physics goals envisaged by the program. This requires a 4π detector system capable of reconstructing the energy and momentum of final state particles with high precision. The Electron-Ion Collider also requires identification of particles of different masses over a wide momentum range. A diverse spectrum of Particle Identification detectors has been proposed. Of the four types of detectors for hadron identification, three are based on Ring Imaging Cherenkov Counter technologies, and one is realized by the Time of Flight method. The quest for a novel photocathode, sensitive in the far vacuum ultra violet wavelength range and more robust than cesium iodide, motivated an R&D programme to explore nano-diamond (ND) based photocathodes, started by a collaboration between INFN and CNR Bari and INFN Trieste. Systematic measurements of the photo emission in different Ar-CH4 and Ar-CO2 gas mixtures with various types of ND powders and Hydrogenated ND (H-ND) powders are reported. A first study of the response of THGEMs coated with different photocathode materials is presented. The progress of this R&D programme and the results obtained so far by these exploratory studies are described. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: arXiv admin note: substantial text overlap with arXiv:2401.17485, arXiv:2006.02352

Journal ref: Nucl. Instr. Meth. A 1048 (2023) 168014

Progress in coupling MPGD-based Photon Detectors with Nanodiamond Photocathodes

Authors: F. M. Brunbauer, C. Chatterjee, G. Cicala, A. Cicuttin, M. L. Crespo, D. D'Ago, S. Dalla Torre, S. Dasgupta, M. Gregori, S. Levorato, T. Ligonzo, M. Lisowska, M. S. Leone, R. Rai, L. Ropelewski, F. Tessarotto, Triloki, A. Valentini, L. Velardi

Abstract: The next generation of gaseous photon detectors is requested to overcome the limitations of the available technology, in terms of resolution and robustness. The quest for a novel photocathode, sensitive in the far vacuum ultra violet wavelength range and more robust than present ones, motivated an R&D programme to explore nanodiamond based photoconverters, which represent the most promising altern… ▽ More The next generation of gaseous photon detectors is requested to overcome the limitations of the available technology, in terms of resolution and robustness. The quest for a novel photocathode, sensitive in the far vacuum ultra violet wavelength range and more robust than present ones, motivated an R&D programme to explore nanodiamond based photoconverters, which represent the most promising alternative to cesium iodine. A procedure for producing the novel photocathodes has been defined and applied on THGEMs samples. Systematic measurements of the photo emission in different Ar/CH4 and Ar/CO2 gas mixtures with various types of nanodiamond powders have been performed. A comparative study of the response of THGEMs before and after coating demonstrated their full compatibility with the novel photocathodes. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Journal ref: Nucl. Instr. Meth. A 1056 (2023) 168575

Epitaxial growth and magnetic properties of kagome metal FeSn/elemental ferromagnet heterostructures

Authors: Prajwal M. Laxmeesha, Tessa D. Tucker, Rajeev Kumar Rai, Shuchen Li, Myoung-Woo Yoo, Eric A. Stach, Axel Hoffmann, Steven J. May

Abstract: Binary kagome compounds TmXn (T = Mn, Fe, Co; X = Sn, Ge; m:n = 3:1, 3:2, 1:1) have garnered recent interest owing to the presence of both topological band crossings and flat bands arising from the geometry of the metal-site kagome lattice. To exploit these electronic features for potential applications in spintronics, the growth of high quality heterostructures is required. Here we report the syn… ▽ More Binary kagome compounds TmXn (T = Mn, Fe, Co; X = Sn, Ge; m:n = 3:1, 3:2, 1:1) have garnered recent interest owing to the presence of both topological band crossings and flat bands arising from the geometry of the metal-site kagome lattice. To exploit these electronic features for potential applications in spintronics, the growth of high quality heterostructures is required. Here we report the synthesis of Fe/FeSn and Co/FeSn bilayers on Al2O3 substrates using molecular beam epitaxy to realize heterointerfaces between elemental ferromagnetic metals and antiferromagnetic kagome metals. Structural characterization using high-resolution X-ray diffraction, reflection high-energy electron diffraction, and electron microscopy reveals the FeSn films are flat and epitaxial. Rutherford backscattering spectroscopy was used to confirm the stoichiometric window where the FeSn phase is stabilized, while transport and magnetometry measurements were conducted to verify metallicity and magnetic ordering in the films. Exchange bias was observed, confirming the presence of antiferromagnetic order in the FeSn layers, paving the way for future studies of magnetism in kagome heterostructures and potential integration of these materials into devices. △ Less

Submitted 21 January, 2024; originally announced January 2024.

Comments: The following article has been submitted to the Journal of Applied Physics

Development Of Raspberry Pi-based Processing Unit for UV Photon-Counting Detectors

Authors: Bharat Chandra P, Binukumar G., Shubham Janakiram, Mahesh Babu, Shubhangi Jain, Richa Rai, Rekhesh Mohan, Margarita Safonova, Jayant Murthy

Abstract: In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detecto… ▽ More In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detectors is resource-intensive and expensive. In this paper, we describe the development of a low-cost UV photon-counting detector processing unit that employs a Raspberry Pi with its in built readout to perform the photon-counting operation. Our system can operate in both 3x3 and 5x5 window modes at 30 frames per sec (fps), where 5x5 window mode also enables the provision of detection of double events. The system can be built quickly from readily available custom-off-the-shelf (COTS) components and is thus used in inexpensive CubeSats or small satellite missions. This low-cost solution promises to broaden access to UV observations, advancing research possibilities in space-based astronomy. △ Less

Submitted 5 January, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Journal ref: Journal of Astronomical Instrumentation, 2024

Effect of dimensionality change on the bias of word embeddings

Authors: Rohit Raj Rai, Amit Awekar

Abstract: Word embedding methods (WEMs) are extensively used for representing text data. The dimensionality of these embeddings varies across various tasks and implementations. The effect of dimensionality change on the accuracy of the downstream task is a well-explored question. However, how the dimensionality change affects the bias of word embeddings needs to be investigated. Using the English Wikipedia… ▽ More Word embedding methods (WEMs) are extensively used for representing text data. The dimensionality of these embeddings varies across various tasks and implementations. The effect of dimensionality change on the accuracy of the downstream task is a well-explored question. However, how the dimensionality change affects the bias of word embeddings needs to be investigated. Using the English Wikipedia corpus, we study this effect for two static (Word2Vec and fastText) and two context-sensitive (ElMo and BERT) WEMs. We have two observations. First, there is a significant variation in the bias of word embeddings with the dimensionality change. Second, there is no uniformity in how the dimensionality change affects the bias of word embeddings. These factors should be considered while selecting the dimensionality of word embeddings. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Comments: Accepted for publication in the Young Research Symposium Track of ACM CODS-COMADS 2024. 2 pages

Effect of Spin Fluctuations on Magnetoresistance and Anomalous Hall Effect in the Chiral Magnet Co8Zn8Mn4

Authors: P. Saha, P. Das, M. Singh, R. Rai, S. Patnaik

Abstract: The beta Mn type Co-Zn-Mn alloys have seized significant attention due to their ability to host skyrmions at room temperature. Here we analyse the unconventional magneto-transport properties of Co8Zn8Mn4 single crystals with a Curie temperature of 275 K. A negative magnetoresistance is obtained over a wide temperature range of 50K to 300K. The deviation of the isothermal magnetoresistance (MR) cur… ▽ More The beta Mn type Co-Zn-Mn alloys have seized significant attention due to their ability to host skyrmions at room temperature. Here we analyse the unconventional magneto-transport properties of Co8Zn8Mn4 single crystals with a Curie temperature of 275 K. A negative magnetoresistance is obtained over a wide temperature range of 50K to 300K. The deviation of the isothermal magnetoresistance (MR) curves from linearity to non-linearity as one approaches higher temperatures points towards the transition from the dominance of magnons to spin fluctuations. In the paramagnetic phase, the change in the shape of the MR curve has been explained using the Khosla and Fischer model. The relationship between the anomalous Hall effect (AHE) and longitudinal resistivity reveals the dominance of the skew-scattering mechanism, which is inexplicable based on the theories of semi-classical magneto-transport. We experimentally determine that the spin fluctuation is the source of the skew-scattering mechanism in Co8Zn8Mn4. In general skew-scattering mechanisms predominate in compounds with high conductivity, but our findings demonstrate that this is not always the case and that other aspects also require equal consideration. Our work throws new light on the predominant scattering mechanism in chiral magnets with skyrmionics phase at low conductivity. △ Less

Submitted 1 October, 2023; originally announced October 2023.

Characterization of LAPPD timing at CERN PS testbeam

Authors: Deb Sankar Bhattacharya, Andrea Bressan, Chandradoy Chatterjee, Silvia Dalla Torre, Mauro Gregori, Alexander Kiselev, Stefano Levorato, Anna Martin, Saverio Minutoli, Mikhail Osipenko, Richa Rai, Marco Ripani, Fulvio Tessarotto, Triloki Triloki

Abstract: Large Area Picosecond PhotoDetectors (LAPPDs) are photosensors based on microchannel plate technology with about 400 cm$^2$ sensitive area. The external readout plane of a capacitively coupled LAPPD can be segmented into pads providing a spatial resolution down to 1 mm scale. The LAPPD signals have about 0.5 ns risetime followed by a slightly longer falltime and their amplitude reaches a few dozen… ▽ More Large Area Picosecond PhotoDetectors (LAPPDs) are photosensors based on microchannel plate technology with about 400 cm$^2$ sensitive area. The external readout plane of a capacitively coupled LAPPD can be segmented into pads providing a spatial resolution down to 1 mm scale. The LAPPD signals have about 0.5 ns risetime followed by a slightly longer falltime and their amplitude reaches a few dozens of mV per single photoelectron. In this article, we report on the measurement of the time resolution of an LAPPD prototype in a test beam exercise at CERN PS. Most of the previous measurements of LAPPD time resolution had been performed with laser sources. In this article we report time resolution measurements obtained through the detection of Cherenkov radiation emitted by high energy hadrons. Our approach has been demonstrated capable of measuring time resolutions as fine as 25-30 ps. The available prototype had performance limitations, which prevented us from applying the optimal high voltage setting. The measured time resolution for single photoelectrons is about 80 ps r.m.s. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 35 pages, 23 figures

Large electro-opto-mechanical coupling in VO2 neuristors

Authors: Upanya Khandelwal, Rama Satya Sandilya, Rajeev Kumar Rai, Deepak Sharma, Smruti Rekha Mahapatra, Debasish Mondal, Navakanta Bhat, Naga Phani Aetkuri, Sushobhan Avasthi, Saurabh Chandorkar, Pavan Nukala

Abstract: Biological neurons are electro-mechanical systems, where the generation and propagation of an action potential is coupled to generation and transmission of an acoustic wave. Neuristors, such as VO2, characterized by insulator-metal transition (IMT) and negative differential resistance, can be engineered as self-oscillators, which are good approximations of biological neurons in the domain of elect… ▽ More Biological neurons are electro-mechanical systems, where the generation and propagation of an action potential is coupled to generation and transmission of an acoustic wave. Neuristors, such as VO2, characterized by insulator-metal transition (IMT) and negative differential resistance, can be engineered as self-oscillators, which are good approximations of biological neurons in the domain of electrical signals. In this study, we show that these self-oscillators are coupled electro-opto-mechanical systems, with better energy conversion coefficients than the conventional electromechanical or electrooptical materials. This is due to the significant contrast in the material's resistance, optical refractive index and density across the induced temperature range in a Joule heating driven IMT. We carried out laser interferometry to measure the opto-mechanical response while simultaneously driving the devices electrically into self-oscillations of different kinds. We analyzed films of various thicknesses, engineered device geometry and performed analytical modelling to decouple the effects of refractive index change vis-a-vis mechanical strain in the interferometry signal. We show that the effective piezoelectric coefficient (d13*) for our neuristor devices is 660 pm/V, making them viable alternatives to Pb-based piezoelectrics for MEMS applications. Furthermore, we show that the effective electro-optic coefficient (r13*) is ~22 nm/V, which is much larger than that in thin-film and bulk Pockels materials. △ Less

Submitted 25 June, 2023; originally announced June 2023.

Comments: 37 pages, 20 Figures

Giant electromechanical response from defective non-ferroelectric epitaxial BaTiO3 integrated on Si 100

Authors: Sandeep Vura, Shubham Kumar Parate, Subhajit Pal, Upanya Khandelwal, Rajeev Kumar Rai, Sri Harsha Molleti, Vishnu Kumar, Rama Satya Sandilya Ventrapragada, Girish Patil, Mudit Jain, Ambresh Mallya, Majid Ahmadi, Bart Kooi, Sushobhan Avasthi, Rajeev Ranjan, Srinivasan Raghavan, Saurabh Chandorkar, Pavan Nukala

Abstract: Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values o… ▽ More Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values of electrostrictive strain coefficients (M31) at frequencies as large as 5 kHz (1.04 x 10-14 m2 per V2 at 1 kHz, and 3.87 x 10-15 m2 per V2 at 5 kHz) using A-site and oxygen-deficient barium titanate thin-films, epitaxially integrated onto Si. The effect is robust and retained even after cycling the devices >5000 times. Our perovskite films are non-ferroelectric, exhibit a different symmetry compared to stoichiometric BaTiO3 and are characterized by twin boundaries and nano polar-like regions. We show that the dielectric relaxation arising from the defect-induced features correlates very well with the observed giant electrostrictive response. These films show large coefficient of thermal expansion (2.36 x 10-5/K), which along with the giant M31 implies a considerable increase in the lattice anharmonicity induced by the defects. Our work provides a crucial step forward towards formulating guidelines to engineer large electromechanical responses even at higher frequencies in lead-free thin films. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Comments: 26 pages, 4 figures, 8 supplementary figures

Optical linear-nonlinear and dispersion parameters of thermally evaporated SnS thin films as absorber material for solar cells

Authors: Vinita, P. Arun, Chandra Kumar, R. Rai, B. K. Singh

Abstract: In this manuscript, we report the results of optical properties of SnS thin films, deposited on FTO coated glass substrates at room temperature by thermal evaporation technique. In addition, the effect of film thickness on the optical behavior of FTO/SnS is analyzed and obtained results are compared with data of SnS films grown on glass and ITO substrates. Our study indicates that the properties o… ▽ More In this manuscript, we report the results of optical properties of SnS thin films, deposited on FTO coated glass substrates at room temperature by thermal evaporation technique. In addition, the effect of film thickness on the optical behavior of FTO/SnS is analyzed and obtained results are compared with data of SnS films grown on glass and ITO substrates. Our study indicates that the properties of SnS film are independent of the substrate material. Further, the influence of the film thickness on the other optical parameters including, linear and third order nonlinear optical constants and dispersion parameters have also been investigated using the transmission, reflection, and absorption spectra. It is found that the optical band gap decreases from 2.07 to 1.30 eV with increase in SnS film thickness, whereas the refractive index increases with increasing thickness. Additionally, the oscillator energy, and the dispersion energy are estimated using WempleDiDomenico approach. The dispersion energies are in the range of 7.20 to 4.59 eV, while the oscillator energies of the thin films are in the range of 5.49 to 2.24 eV. Moreover, the nonlinear refractive index, and optical susceptibility are calculated by using the empirical relation of Tichy and Ticha. The volume of data suggests optical properties of SnS thin films are strongly dependent on film thickness. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 24 pages, 11 figures

Modulation-Do** a Correlated Electron Insulator

Authors: Debasish Mondal, Smruti Rekha Mahapatra, Abigail M Derrico, Rajeev Kumar Rai, Jay R Paudel, Christoph Schlueter, Andrei Gloskovskii, Rajdeep Banerjee, Frank M F DeGroot, Dipankar D Sarma, Awadhesh Narayan, Pavan Nukala, Alexander X Gray, Naga Phani B Aetukuri

Abstract: Correlated electron materials (CEMs) host a rich variety of condensed matter phases. Vanadium dioxide (VO2) is a prototypical CEM with a temperature-dependent metal-to-insulator (MIT) transition with a concomitant crystal symmetry change. External control of MIT in VO2 - especially without inducing structural changes - has been a long-standing challenge. In this work, we design and synthesize modu… ▽ More Correlated electron materials (CEMs) host a rich variety of condensed matter phases. Vanadium dioxide (VO2) is a prototypical CEM with a temperature-dependent metal-to-insulator (MIT) transition with a concomitant crystal symmetry change. External control of MIT in VO2 - especially without inducing structural changes - has been a long-standing challenge. In this work, we design and synthesize modulation-doped VO2-based thin film heterostructures that closely emulate a textbook example of filling control in a correlated electron insulator. Using a combination of charge transport, hard x-ray photoelectron spectroscopy, and structural characterization, we show that the insulating state can be doped to achieve carrier densities greater than 5x10^21 cm^(-3) without inducing any measurable structural changes. We find that the MIT temperature (T_MIT) continuously decreases with increasing carrier concentration. Remarkably, the insulating state is robust even at do** concentrations as high as ~0.2 e-/vanadium. Finally, our work reveals modulation-do** as a viable method for electronic control of phase transitions in correlated electron oxides with the potential for use in future devices based on electric-field controlled phase transitions. △ Less

Submitted 7 January, 2023; originally announced January 2023.

Comments: Main paper 21 pages, 5 Figures. Supporting Information, 18 Pages,15 SI Figures and 1 SI Section

Constructive comparison in bidding combinatorial games

Authors: Prem Kant, Urban Larsson, Ravi K. Rai, Akshay V. Upasany

Abstract: A class of discrete Bidding Combinatorial Games that generalize alternating normal play was introduced by Kant, Larsson, Rai, and Upasany (2022). The major questions concerning optimal outcomes were resolved. By generalizing standard game comparison techniques from alternating normal play, we propose an algorithmic play-solution to the problem of game comparison for bidding games. We demonstrate s… ▽ More A class of discrete Bidding Combinatorial Games that generalize alternating normal play was introduced by Kant, Larsson, Rai, and Upasany (2022). The major questions concerning optimal outcomes were resolved. By generalizing standard game comparison techniques from alternating normal play, we propose an algorithmic play-solution to the problem of game comparison for bidding games. We demonstrate some consequences of this result that generalize classical results in alternating play (from Winning Ways 1982 and On Numbers and Games 1976). In particular, integers, dyadics and numbers have many nice properties, such as group structures, but on the other hand the game * is non-invertible. We state a couple of thrilling conjectures and open problems for readers to dive into this promising path of bidding combinatorial games. △ Less

Submitted 30 October, 2023; v1 submitted 23 July, 2022; originally announced July 2022.

Comments: 23 pages, 1 figure

MSC Class: 91A46; 91A05

Bidding combinatorial games

Authors: Prem Kant, Urban Larsson, Ravi K. Rai, Akshay V. Upasany

Abstract: Combinatorial Game Theory is a branch of mathematics and theoretical computer science that studies sequential 2-player games with perfect information. Normal play is the convention where a player who cannot move loses. Here, we generalize the classical alternating normal play to infinitely many game families, by means of discrete Richman auctions (Develin et al. 2010, Larsson et al. 2021, Lazarus… ▽ More Combinatorial Game Theory is a branch of mathematics and theoretical computer science that studies sequential 2-player games with perfect information. Normal play is the convention where a player who cannot move loses. Here, we generalize the classical alternating normal play to infinitely many game families, by means of discrete Richman auctions (Develin et al. 2010, Larsson et al. 2021, Lazarus et al. 1996). We generalize the notion of a perfect play outcome, and find an exact characterization of outcome feasibility. As a main result, we prove existence of a game form for each such outcome class; then we describe their lattice structures. By imposing restrictions to the general families, such as impartial and {\em symmetric termination}, we find surprising analogies with alternating play. △ Less

Submitted 30 October, 2023; v1 submitted 17 July, 2022; originally announced July 2022.

Comments: 5 figures

MSC Class: 91A46; 91A05

Low-Cost Raspberry Pi Star Sensor for Small Satellites

Authors: Bharat Chandra P, Mayuresh Sarpotdar, Binukumar G. Nair, Richa Rai, Rekhesh Mohan, Joice Mathew, Margarita Safonova, Jayant Murthy

Abstract: We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in… ▽ More We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in small satellite missions. StarberrySense is a configurable system -- it can operate as an imaging camera, a centroiding camera, or as a star sensor. We describe the algorithms implemented in the sensor, its assembly and calibration. This payload was selected by a recent Announcement of Opportunity call for payloads to fly on the PS4-Orbital Platform by the Indian Space Research Organization (ISRO). △ Less

Submitted 13 July, 2022; v1 submitted 7 July, 2022; originally announced July 2022.

Comments: J. Astron. Telesc. Instrum. Syst (Accepted)

Journal ref: J. of Astronomical Telescopes, Instruments, and Systems, 8(3), 036002 (2022)

Deep Learning and Handheld Augmented Reality Based System for Optimal Data Collection in Fault Diagnostics Domain

Authors: Ryan Nguyen, Rahul Rai

Abstract: Compared to current AI or robotic systems, humans navigate their environment with ease, making tasks such as data collection trivial. However, humans find it harder to model complex relationships hidden in the data. AI systems, especially deep learning (DL) algorithms, impressively capture those complex relationships. Symbiotically coupling humans and computational machines' strengths can simultan… ▽ More Compared to current AI or robotic systems, humans navigate their environment with ease, making tasks such as data collection trivial. However, humans find it harder to model complex relationships hidden in the data. AI systems, especially deep learning (DL) algorithms, impressively capture those complex relationships. Symbiotically coupling humans and computational machines' strengths can simultaneously minimize the collected data required and build complex input-to-output map** models. This paper enables this coupling by presenting a novel human-machine interaction framework to perform fault diagnostics with minimal data. Collecting data for diagnosing faults for complex systems is difficult and time-consuming. Minimizing the required data will increase the practicability of data-driven models in diagnosing faults. The framework provides instructions to a human user to collect data that mitigates the difference between the data used to train and test the fault diagnostics model. The framework is composed of three components: (1) a reinforcement learning algorithm for data collection to develop a training dataset, (2) a deep learning algorithm for diagnosing faults, and (3) a handheld augmented reality application for data collection for testing data. The proposed framework has provided above 100\% precision and recall on a novel dataset with only one instance of each fault condition. Additionally, a usability study was conducted to gauge the user experience of the handheld augmented reality application, and all users were able to follow the provided steps. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Physics-Infused Fuzzy Generative Adversarial Network for Robust Failure Prognosis

Authors: Ryan Nguyen, Shubhendu Kumar Singh, Rahul Rai

Abstract: Prognostics aid in the longevity of fielded systems or products. Quantifying the system's current health enable prognosis to enhance the operator's decision-making to preserve the system's health. Creating a prognosis for a system can be difficult due to (a) unknown physical relationships and/or (b) irregularities in data appearing well beyond the initiation of a problem. Traditionally, three diff… ▽ More Prognostics aid in the longevity of fielded systems or products. Quantifying the system's current health enable prognosis to enhance the operator's decision-making to preserve the system's health. Creating a prognosis for a system can be difficult due to (a) unknown physical relationships and/or (b) irregularities in data appearing well beyond the initiation of a problem. Traditionally, three different modeling paradigms have been used to develop a prognostics model: physics-based (PbM), data-driven (DDM), and hybrid modeling. Recently, the hybrid modeling approach that combines the strength of both PbM and DDM based approaches and alleviates their limitations is gaining traction in the prognostics domain. In this paper, a novel hybrid modeling approach for prognostics applications based on combining concepts from fuzzy logic and generative adversarial networks (GANs) is outlined. The FuzzyGAN based method embeds a physics-based model in the aggregation of the fuzzy implications. This technique constrains the output of the learning method to a realistic solution. Results on a bearing problem showcases the efficacy of adding a physics-based aggregation in a fuzzy logic model to improve GAN's ability to model health and give a more accurate system prognosis. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Semantic Map Injected GAN Training for Image-to-Image Translation

Authors: Balaram Singh Kshatriya, Shiv Ram Dubey, Himangshu Sarma, Kunal Chaudhary, Meva Ram Gurjar, Rahul Rai, Sunny Manchanda

Abstract: Image-to-image translation is the recent trend to transform images from one domain to another domain using generative adversarial network (GAN). The existing GAN models perform the training by only utilizing the input and output modalities of transformation. In this paper, we perform the semantic injected training of GAN models. Specifically, we train with original input and output modalities and… ▽ More Image-to-image translation is the recent trend to transform images from one domain to another domain using generative adversarial network (GAN). The existing GAN models perform the training by only utilizing the input and output modalities of transformation. In this paper, we perform the semantic injected training of GAN models. Specifically, we train with original input and output modalities and inject a few epochs of training for translation from input to semantic map. Lets refer the original training as the training for the translation of input image into target domain. The injection of semantic training in the original training improves the generalization capability of the trained GAN model. Moreover, it also preserves the categorical information in a better way in the generated image. The semantic map is only utilized at the training time and is not required at the test time. The experiments are performed using state-of-the-art GAN models over CityScapes and RGB-NIR stereo datasets. We observe the improved performance in terms of the SSIM, FID and KID scores after injecting semantic training as compared to original training. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Comments: Accepted in Fourth Workshop on Computer Vision Applications (WCVA) at ICVGIP 2021

Coupled autonomous thermal machines and efficiency at maximum power

Authors: Ramandeep S. Johal, Renuka Rai

Abstract: We show that coupled autonomous thermal machines, in the presence of three heat reservoirs and following a global linear-irreversible description, provide a unified framework to accommodate the variety of expressions for the efficiency at maximum power (EMP). The efficiency is expressible in terms of the Carnot efficiency of the global set up if the intermediate reservoir temperature is an algebra… ▽ More We show that coupled autonomous thermal machines, in the presence of three heat reservoirs and following a global linear-irreversible description, provide a unified framework to accommodate the variety of expressions for the efficiency at maximum power (EMP). The efficiency is expressible in terms of the Carnot efficiency of the global set up if the intermediate reservoir temperature is an algebraic mean of the hot and cold temperatures. We give an explanation of the universal properties of EMP near equilibrium in terms of the properties of symmetric algebraic means. For the case of broken time reversal symmetry, a universal second order coefficient of 6/49 is predicted in the series expansion of EMP, analogous to the 1/8 coefficient in the time-reversal symmetric case. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Comments: Revtex4-2,7 pages, 2 figures, 1 table

Journal ref: Phys. Rev. E 105, 044145 (2022)

Fuzzy Generative Adversarial Networks

Authors: Ryan Nguyen, Shubhendu Kumar Singh, Rahul Rai

Abstract: Generative Adversarial Networks (GANs) are well-known tools for data generation and semi-supervised classification. GANs, with less labeled data, outperform Deep Neural Networks (DNNs) and Convolutional Neural Networks (CNNs) in classification across various tasks, this shows promise for develo** GANs capable of trespassing into the domain of semi-supervised regression. However, develo** GANs… ▽ More Generative Adversarial Networks (GANs) are well-known tools for data generation and semi-supervised classification. GANs, with less labeled data, outperform Deep Neural Networks (DNNs) and Convolutional Neural Networks (CNNs) in classification across various tasks, this shows promise for develo** GANs capable of trespassing into the domain of semi-supervised regression. However, develo** GANs for regression introduce two major challenges: (1) inherent instability in the GAN formulation and (2) performing regression and achieving stability simultaneously. This paper introduces techniques that show improvement in the GANs' regression capability through mean absolute error (MAE) and mean squared error (MSE). We bake a differentiable fuzzy logic system at multiple locations in a GAN because fuzzy logic systems have demonstrated high efficacy in classification and regression settings. The fuzzy logic takes the output of either or both the generator and the discriminator to either or both predict the output, $y$, and evaluate the generator's performance. We outline the results of applying the fuzzy logic system to CGAN and summarize each approach's efficacy. This paper shows that adding a fuzzy logic layer can enhance GAN's ability to perform regression; the most desirable injection location is problem-specific, and we show this through experiments over various datasets. Besides, we demonstrate empirically that the fuzzy-infused GAN is competitive with DNNs. △ Less

Submitted 27 October, 2021; originally announced October 2021.

IH-GAN: A Conditional Generative Model for Implicit Surface-Based Inverse Design of Cellular Structures

Authors: Jun Wang, Wei Wayne Chen, Daicong Da, Mark Fuge, Rahul Rai

Abstract: Variable-density cellular structures can overcome connectivity and manufacturability issues of topologically optimized structures, particularly those represented as discrete density maps. However, the optimization of such cellular structures is challenging due to the multiscale design problem. Past work addressing this problem generally either only optimizes the volume fraction of single-type unit… ▽ More Variable-density cellular structures can overcome connectivity and manufacturability issues of topologically optimized structures, particularly those represented as discrete density maps. However, the optimization of such cellular structures is challenging due to the multiscale design problem. Past work addressing this problem generally either only optimizes the volume fraction of single-type unit cells but ignores the effects of unit cell geometry on properties, or considers the geometry-property relation but builds this relation via heuristics. In contrast, we propose a simple yet more principled way to accurately model the property to geometry map** using a conditional deep generative model, named Inverse Homogenization Generative Adversarial Network (IH-GAN). It learns the conditional distribution of unit cell geometries given properties and can realize the one-to-many map** from properties to geometries. We further reduce the complexity of IH-GAN by using the implicit function parameterization to represent unit cell geometries. Results show that our method can 1) generate various unit cells that satisfy given material properties with high accuracy ($R^2$-scores between target properties and properties of generated unit cells $>98\%$) and 2) improve the optimized structural performance over the conventional variable-density single-type structure. In the minimum compliance example, our IH-GAN generated structure achieves a $79.7\%$ reduction in concentrated stress and an extra $3.03\%$ reduction in displacement. In the target deformation examples, our IH-GAN generated structure reduces the target matching error by $86.4\%$ and $79.6\%$ for two test cases, respectively. We also demonstrated that the connectivity issue for multi-type unit cells can be solved by transition layer blending. △ Less

Submitted 11 May, 2022; v1 submitted 3 March, 2021; originally announced March 2021.

Comments: Accepted by Computer Methods in Applied Mechanics and Engineering (CMAME)

Uncertainty guided semi-supervised segmentation of retinal layers in OCT images

Authors: Suman Sedai, Bhavna Antony, Ravneet Rai, Katie Jones, Hiroshi Ishikawa, Joel Schuman, Wollstein Gadi, Rahil Garnavi

Abstract: Deep convolutional neural networks have shown outstanding performance in medical image segmentation tasks. The usual problem when training supervised deep learning methods is the lack of labeled data which is time-consuming and costly to obtain. In this paper, we propose a novel uncertainty-guided semi-supervised learning based on a student-teacher approach for training the segmentation network us… ▽ More Deep convolutional neural networks have shown outstanding performance in medical image segmentation tasks. The usual problem when training supervised deep learning methods is the lack of labeled data which is time-consuming and costly to obtain. In this paper, we propose a novel uncertainty-guided semi-supervised learning based on a student-teacher approach for training the segmentation network using limited labeled samples and a large number of unlabeled images. First, a teacher segmentation model is trained from the labeled samples using Bayesian deep learning. The trained model is used to generate soft segmentation labels and uncertainty maps for the unlabeled set. The student model is then updated using the softly segmented samples and the corresponding pixel-wise confidence of the segmentation quality estimated from the uncertainty of the teacher model using a newly designed loss function. Experimental results on a retinal layer segmentation task show that the proposed method improves the segmentation performance in comparison to the fully supervised approach and is on par with the expert annotator. The proposed semi-supervised segmentation framework is a key contribution and applicable for biomedical image segmentation across various imaging modalities where access to annotated medical images is challenging △ Less

Submitted 2 March, 2021; originally announced March 2021.

Comments: MICCAI,19

Journal ref: MICCAI 2019 pp 282-290

Deep Learning based Multi-Modal Sensing for Tracking and State Extraction of Small Quadcopters

Authors: Zhibo Zhang, Chen Zeng, Maulikkumar Dhameliya, Souma Chowdhury, Rahul Rai

Abstract: This paper proposes a multi-sensor based approach to detect, track, and localize a quadcopter unmanned aerial vehicle (UAV). Specifically, a pipeline is developed to process monocular RGB and thermal video (captured from a fixed platform) to detect and track the UAV in our FoV. Subsequently, a 2D planar lidar is used to allow conversion of pixel data to actual distance measurements, and thereby en… ▽ More This paper proposes a multi-sensor based approach to detect, track, and localize a quadcopter unmanned aerial vehicle (UAV). Specifically, a pipeline is developed to process monocular RGB and thermal video (captured from a fixed platform) to detect and track the UAV in our FoV. Subsequently, a 2D planar lidar is used to allow conversion of pixel data to actual distance measurements, and thereby enable localization of the UAV in global coordinates. The monocular data is processed through a deep learning-based object detection method that computes an initial bounding box for the UAV. The thermal data is processed through a thresholding and Kalman filter approach to detect and track the bounding box. Training and testing data are prepared by combining a set of original experiments conducted in a motion capture environment and publicly available UAV image data. The new pipeline compares favorably to existing methods and demonstrates promising tracking and localization capacity of sample experiments. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comparing the collective behavior of banking industry

Authors: Hanie. Vahabi, Ali Namaki, Reza Raei

Abstract: One of the most important features of capital markets as an adaptive complex networks is their collective behavior. In this paper, we have analyzed the banking sectors of 4 world stock markets,which composed of emerging and matures ones. By applying one the important complexity notions, Random matrix theory(RMT), it is founded that mature markets have a higher degree of collective behavior,Even th… ▽ More One of the most important features of capital markets as an adaptive complex networks is their collective behavior. In this paper, we have analyzed the banking sectors of 4 world stock markets,which composed of emerging and matures ones. By applying one the important complexity notions, Random matrix theory(RMT), it is founded that mature markets have a higher degree of collective behavior,Even though we used RMT tools: participation ratio(PR), node participation ratio(NPR)and relative participation ratio(RPR) , which NPR illustrated independent banks than whole market and RPR compared collective behavior of markets by a normal range. By applying local and global perturbations, we concluded that mature markets are more vulnerable to perturbations due to the high level of collective behavior. Finally, by drawing the dendrograms and heat maps of the correlation matrices, △ Less

Submitted 2 November, 2020; originally announced November 2020.

Comments: e.g=14pages,9figures

Analysis of the Global Banking Network by Random Matrix Theory

Authors: Ali Namaki, Jamshid Ardalankia, Reza Raei, Leila Hedayatifar, Ali Hosseiny, Emmanuel Haven, G. Reza Jafari

Abstract: Since 2008, the network analysis of financial systems is one of the most important subjects in economics. In this paper, we have used the complexity approach and Random Matrix Theory (RMT) for analyzing the global banking network. By applying this method on a cross border lending network, it is shown that the network has been denser and the connectivity between peripheral nodes and the central sec… ▽ More Since 2008, the network analysis of financial systems is one of the most important subjects in economics. In this paper, we have used the complexity approach and Random Matrix Theory (RMT) for analyzing the global banking network. By applying this method on a cross border lending network, it is shown that the network has been denser and the connectivity between peripheral nodes and the central section has risen. Also, by considering the collective behavior of the system and comparing it with the shuffled one, we can see that this network obtains a specific structure. By using the inverse participation ratio concept, we can see that after 2000, the participation of different modes to the network has increased and tends to the market mode of the system. Although no important change in the total market share of trading occurs, through the passage of time, the contribution of some countries in the network structure has increased. The technique proposed in the paper can be useful for analyzing different types of interaction networks between countries. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Comments: 5 pages, 4 figures

Crystal and Magnetic Structure of Polar Oxide HoCrWO$_6$

Authors: C. Dhital, D. Pham, T. Lawal, C. Bucholz, A. Poyraz, Q. Zhang, R. Nepal, R. **, R. Rai

Abstract: Polar magnetic oxide HoCrWO$_6$ is synthesized and its crystal structure, magnetic structure, and thermodynamic properties are investigated. HoCrWO$_6$ forms the polar crystal structure (space group Pna2$_1$ (#33)) due to the cation ordering of W$^{6+}$ and Cr$^{3+}$. There is an antiferromagnetic transition at TN = 24.5 K along with the magnetic entropy change (~5 J.Kg.$^{-1}$K$^{-1}$ at 70 kOe).… ▽ More Polar magnetic oxide HoCrWO$_6$ is synthesized and its crystal structure, magnetic structure, and thermodynamic properties are investigated. HoCrWO$_6$ forms the polar crystal structure (space group Pna2$_1$ (#33)) due to the cation ordering of W$^{6+}$ and Cr$^{3+}$. There is an antiferromagnetic transition at TN = 24.5 K along with the magnetic entropy change (~5 J.Kg.$^{-1}$K$^{-1}$ at 70 kOe). Neutron diffraction measurement indicates that both Cr and Ho sublattices are ordered with the moment of 2.32(5)$μ_B$ and 8.7(4)$μ_B$ at 2 K, respectively. While Cr forms A-type collinear antiferromagnetic (AFM) structure with magnetic moment along the $b$ axis, Ho sublattice orders in a non-coplanar AFM arrangement. A comparison with isostructural DyFeWO$_6$ and DyCrWO$_6$ indicates that the magnetic structure of this family of compounds is controlled by the presence or absence of eg electrons in the transition metal sublattice. △ Less

Submitted 16 July, 2020; originally announced July 2020.

Comments: 7 figures, 22 pages. Journal of magnetism and magnetic materials, 2020

Identifying Weakly Connected Subsystems in Building Energy Model for Effective Load Estimation in Presence of Parametric Uncertainty

Authors: Arpan Mukherjee, Anna Kuechle Szweda, Andrew Alegria, Rahul Rai, Tarunraj Singh

Abstract: It is necessary to estimate the expected energy usage of a building to determine how to reduce energy usage. The expected energy usage of a building can be reliably simulated using a Building Energy Model (BEM). Many of the numerous input parameters in a BEM are uncertain. To ensure that the building simulation is sufficiently accurate, and to better understand the impact of imprecisions in the in… ▽ More It is necessary to estimate the expected energy usage of a building to determine how to reduce energy usage. The expected energy usage of a building can be reliably simulated using a Building Energy Model (BEM). Many of the numerous input parameters in a BEM are uncertain. To ensure that the building simulation is sufficiently accurate, and to better understand the impact of imprecisions in the input parameters and calculation methods, it is desirable to quantify uncertainty in the BEM throughout the modeling process. Uncertainty quantification (UQ) typically requires a large number of simulations to produce meaningful data, which, due to the vast number of input parameters and the dynamic nature of building simulation, is computationally expensive. Uncertainty Quantification (UQ) in BEM domain is thus intractable due to the size of the problem and parameters involved and hence it needs an advanced methodology for analysis. The current paper outlines a novel Weakly-Connected-Systems (WCSs) identification-based UQ framework developed to propagate the quantifiable uncertainty in the BEM. The overall approach is demonstrated on the physics-based thermal model of an actual building in Central New York. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Interpretable machine learning models: a physics-based view

Authors: Ion Matei, Johan de Kleer, Christoforos Somarakis, Rahul Rai, John S. Baras

Abstract: To understand changes in physical systems and facilitate decisions, explaining how model predictions are made is crucial. We use model-based interpretability, where models of physical systems are constructed by composing basic constructs that explain locally how energy is exchanged and transformed. We use the port Hamiltonian (p-H) formalism to describe the basic constructs that contain physically… ▽ More To understand changes in physical systems and facilitate decisions, explaining how model predictions are made is crucial. We use model-based interpretability, where models of physical systems are constructed by composing basic constructs that explain locally how energy is exchanged and transformed. We use the port Hamiltonian (p-H) formalism to describe the basic constructs that contain physically interpretable processes commonly found in the behavior of physical systems. We describe how we can build models out of the p-H constructs and how we can train them. In addition we show how we can impose physical properties such as dissipativity that ensure numerical stability of the training process. We give examples on how to build and train models for describing the behavior of two physical systems: the inverted pendulum and swarm dynamics. △ Less

Submitted 22 March, 2020; originally announced March 2020.

Discrete Richman-bidding Scoring Games

Authors: Urban Larsson, Neel Patel, Ravi Kant Rai

Abstract: We study zero-sum (combinatorial) games, within the framework of so-called Richman auctions (Lazarus et al. 1996) namely, we modify the alternating play scoring ruleset Cumulative Subtraction (CS) (Cohensius et al. 2019), to a discrete bidding scheme (similar to Develin and Payne 2010). Players bid to move and the player with the highest bid wins the move, and hands over the winning bidding amount… ▽ More We study zero-sum (combinatorial) games, within the framework of so-called Richman auctions (Lazarus et al. 1996) namely, we modify the alternating play scoring ruleset Cumulative Subtraction (CS) (Cohensius et al. 2019), to a discrete bidding scheme (similar to Develin and Payne 2010). Players bid to move and the player with the highest bid wins the move, and hands over the winning bidding amount to the other player. The new game is dubbed Bidding Cumulative Subtraction (BCS). In so-called unitary games, players remove exactly one item out of a single heap of identical items, until the heap is empty, and their actions contribute to a common score, which increases or decreases by one unit depending on whether the maximizing player won the turn or not. We show that there is a unique bidding equilibrium for a much larger class of games, that generalize standard scoring play in the literature. We prove that for all sufficiently large heap sizes, the equilibrium outcomes of unitary BCS are eventually periodic, with period 2, and we show that the periodicity appears at the latest for heaps of sizes quadratic in the total budget. △ Less

Submitted 12 March, 2020; originally announced March 2020.

Comments: 26 Pages, 6 figures

MSC Class: 91A46; 11B75; 91A05

Hybrid modeling: Applications in real-time diagnosis

Authors: Ion Matei, Johan de Kleer, Alexander Feldman, Rahul Rai, Souma Chowdhury

Abstract: Reduced-order models that accurately abstract high fidelity models and enable faster simulation is vital for real-time, model-based diagnosis applications. In this paper, we outline a novel hybrid modeling approach that combines machine learning inspired models and physics-based models to generate reduced-order models from high fidelity models. We are using such models for real-time diagnosis appl… ▽ More Reduced-order models that accurately abstract high fidelity models and enable faster simulation is vital for real-time, model-based diagnosis applications. In this paper, we outline a novel hybrid modeling approach that combines machine learning inspired models and physics-based models to generate reduced-order models from high fidelity models. We are using such models for real-time diagnosis applications. Specifically, we have developed machine learning inspired representations to generate reduced order component models that preserve, in part, the physical interpretation of the original high fidelity component models. To ensure the accuracy, scalability and numerical stability of the learning algorithms when training the reduced-order models we use optimization platforms featuring automatic differentiation. Training data is generated by simulating the high-fidelity model. We showcase our approach in the context of fault diagnosis of a rail switch system. Three new model abstractions whose complexities are two orders of magnitude smaller than the complexity of the high fidelity model, both in the number of equations and simulation time are shown. The numerical experiments and results demonstrate the efficacy of the proposed hybrid modeling approach. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Binary square axicon with chiral focusing properties for optical trap**

Authors: Balasubramani Vinoth, Anand Vijayakumar, Mani Ratnam Rai, Joseph Rosen, Chau-Jern Cheng, Oleg V Minin, Igor V Minin

Abstract: We introduce a novel phase-only diffractive optical element called chiral binary square axicon (CBSA). The CBSA is designed by linearly rotating the square half-period zones of the binary square axicon with respect to one another. A quadratic phase mask (QPM) is combined with the CBSA using modulo-2π phase addition technique to bring the far-field intensity pattern of CBSA at the focal plane of th… ▽ More We introduce a novel phase-only diffractive optical element called chiral binary square axicon (CBSA). The CBSA is designed by linearly rotating the square half-period zones of the binary square axicon with respect to one another. A quadratic phase mask (QPM) is combined with the CBSA using modulo-2π phase addition technique to bring the far-field intensity pattern of CBSA at the focal plane of the QPM and to introduce quasi-achromatic effects. The periodically rotated zones of CBSA produces a whirlpool phase profile and twisted intensity patterns at the focal plane of QPM. The degree of twisting seen in the intensity patterns is dependent upon the angular step size of rotation of the zones. The intensity pattern was found to rotate around the optical axis along the direction of propagation. The phase patterns of CBSA with different angles of zone rotation are displayed on a phase-only spatial light modulator and the experimental results were found to match with the simulation results. To evaluate the optical trap** capabilities of CBSA, an optical trap** experiment was carried out and the optical fields generated by CBSA were used for trap** and rotating yeast cells. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: 12 pages, 9 figures

Humidity effects on evolution of CsI thin Films: Fractal studies of rough surfaces

Authors: Nabeel Jammal, R. P. Yadav, Triloki, R. Rai, A. K. Mittal, B. K. Singh

Abstract: The present work investigates the morphological, micro-structural, compositional and fractal analysis for CsI thin films in case of "as-deposited" and "1 hour humid air aged". The variation of grain sizes obtained from transmission electron microscopy (TEM) technique are found to be in the range of ~ 313 nm to ~ 1058 nm. The average grain size is found to increase after exposing to humidity. The e… ▽ More The present work investigates the morphological, micro-structural, compositional and fractal analysis for CsI thin films in case of "as-deposited" and "1 hour humid air aged". The variation of grain sizes obtained from transmission electron microscopy (TEM) technique are found to be in the range of ~ 313 nm to ~ 1058 nm. The average grain size is found to increase after exposing to humidity. The experimental values of interplanner spacing are found to be less than the standard value which signifies that a compressive stress is acting in the film. The elemental compositions of CsI film has been investigated by the means of energy dispersive X-ray spectroscopy (EDAX) technique. The atomic percentage of Cs:I (1:1) is found to be increased by a factor of two after exposing to humidity. The surface morphology of CsI thin films is analyzed by the atomic force microscopy (AFM) for both cases. The fractal analysis is performed on the AFM micrographs. The autocorrelation function and height-height correlation function is used to study the correlation properties of surface and roughness exponent. It is found that the fractal dimension is affected after exposing to humidity. △ Less

Submitted 4 December, 2018; originally announced December 2018.

Executable Trigger-Action Comments

Authors: Pengyu Nie, Rishabh Rai, Junyi Jessy Li, Sarfraz Khurshid, Raymond J. Mooney, Milos Gligoric

Abstract: Natural language elements, e.g., todo comments, are frequently used to communicate among the developers and to describe tasks that need to be performed (actions) when specific conditions hold in the code repository (triggers). As projects evolve, development processes change, and development teams reorganize, these comments, because of their informal nature, frequently become irrelevant or forgott… ▽ More Natural language elements, e.g., todo comments, are frequently used to communicate among the developers and to describe tasks that need to be performed (actions) when specific conditions hold in the code repository (triggers). As projects evolve, development processes change, and development teams reorganize, these comments, because of their informal nature, frequently become irrelevant or forgotten. We present the first technique, dubbed TrigIt, to specify triggeraction todo comments as executable statements. Thus, actions are executed automatically when triggers evaluate to true. TrigIt specifications are written in the host language (e.g., Java) and are evaluated as part of the build process. The triggers are specified as query statements over abstract syntax trees and abstract representation of build configuration scripts, and the actions are specified as code transformation steps. We implemented TrigIt for the Java programming language and migrated 20 existing trigger-action comments from 8 popular open-source projects. We evaluate the cost of using TrigIt in terms of the number of tokens in the executable comments and the time overhead introduced in the build process. △ Less

Submitted 6 August, 2018; originally announced August 2018.

Structural and optical properties of CsI thin films: Influence of film thickness and humidity

Authors: Nabeel Jammal, Richa Rai, Triloki, B. K. Singh

Abstract: Structural and optical studies have been performed on the thermally-evaporated "as-deposited" and "humid air aged" CsI thin films. The structural analysis for both "as-deposited" and "humid air aged" films shows a well-oriented peaks position of (110) and (220) lattice planes with a compressive stress in the films. The crystal quality has been investigated through the structural parameters. The in… ▽ More Structural and optical studies have been performed on the thermally-evaporated "as-deposited" and "humid air aged" CsI thin films. The structural analysis for both "as-deposited" and "humid air aged" films shows a well-oriented peaks position of (110) and (220) lattice planes with a compressive stress in the films. The crystal quality has been investigated through the structural parameters. The increase in peak intensity as well as sharpness with film thickness implies the improvement of crystallinity. The optical absorbance of CsI films has been analyzed in the wavelength range of 190 nm - 900 nm in order to estimate the band gap energy of the films. Slater's model has also been used to explain the degradation of band gap energy with the increase in crystallite size. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: Accepted for publication in Physica B: Condensed Matter Journal

Growth evolution of self-affine thermally evaporated KBr thin films: A fractal assessment

Authors: R. Rai, R. P. Yadav, Triloki, Nabeel Jammal, A. K. Singh, B. K. Singh

Abstract: In this article, fractal concepts were used to explore the thermally evaporated potassium bromide thin films of different thicknesses 200, 300, and 500 nm respectively; grown on aluminium substrates at room temperature. The self-affine or self similar nature of growing surfaces was investigated by autocorrelation function and obtained results are compared with the morphological envelope method. Th… ▽ More In this article, fractal concepts were used to explore the thermally evaporated potassium bromide thin films of different thicknesses 200, 300, and 500 nm respectively; grown on aluminium substrates at room temperature. The self-affine or self similar nature of growing surfaces was investigated by autocorrelation function and obtained results are compared with the morphological envelope method. Theoretical estimations revealed that the global surface parameters such as, interface width and lateral correlation length are monotonically decreased with increasing film thickness. Also, from height profile and A-F plots, it has been perceived that irregularity/ complexity of growing layers was significantly influenced by thickness. On the other hand, the fractal dimension and local roughness exponent, estimated by height-height correlation function, do not suggest such dependency. △ Less

Submitted 16 June, 2018; originally announced June 2018.

X-ray diffraction line profile analysis of KBr thin films

Authors: R. Rai, Triloki, B. K. Singh

Abstract: In the present work, the microcrystalline characteristics of KBr thin films have been investigated by evaluating the breadth of diffraction peak. The Williamson-Hall, the Size-Strain Plot and the single line Voigt methods are employed to deconvolute the finite crystallite size and microstrain contribution from the broaden X-ray profile. The texture coefficient and dislocation density have been det… ▽ More In the present work, the microcrystalline characteristics of KBr thin films have been investigated by evaluating the breadth of diffraction peak. The Williamson-Hall, the Size-Strain Plot and the single line Voigt methods are employed to deconvolute the finite crystallite size and microstrain contribution from the broaden X-ray profile. The texture coefficient and dislocation density have been determined along each diffraction peak. Other relevant physical parameters such as stress, Young's modulus and energy density are also estimated using Uniform Stress-Deformation and Uniform Deformation Energy Density approximation of Williamson-Hall method. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Correlation between photoemissive and morphological properties of KBr thin film photocathodes

Authors: R. Rai, Triloki, B. K. Singh, N. F. A. Jammal

Abstract: In the present work, the morphological properties of KBr photocathodes are correlated with their photoemissive behaviour using a combination of analyzing techniques including SEM, TEM and AFM. From morphological studies, it is observed that KBr films have granular characteristics with varied average grain size and grain density. Structure and orientation of individual grains have been investigated… ▽ More In the present work, the morphological properties of KBr photocathodes are correlated with their photoemissive behaviour using a combination of analyzing techniques including SEM, TEM and AFM. From morphological studies, it is observed that KBr films have granular characteristics with varied average grain size and grain density. Structure and orientation of individual grains have been investigated by selected area electron diffraction technique and found to be the crystalline in nature with a face centered cubic structure. It is evident from the AFM analysis that the root mean square roughness and maximum area peak height have been decreased with the deposition of more KBr layers. The photoemission studies reveal that the resultant photocurrent is enhanced with increasing film thickness and it is directly related to the surface area coverage and grain density. △ Less

Submitted 4 October, 2017; v1 submitted 17 September, 2017; originally announced September 2017.

Near-equilibrium universality and bounds on efficiency in quasi-static regime with finite source and sink

Authors: Ramandeep S. Johal, Renuka Rai

Abstract: We show the validity of some results of finite-time thermodynamics, also within the quasi-static framework of classical thermodynamics. First, we consider the efficiency at maximum work (EMW) from finite source and sink modelled as identical thermodynamic systems. The near-equilibrium regime is characterized by expanding the internal energy upto second order (i.e. upto linear response) in the diff… ▽ More We show the validity of some results of finite-time thermodynamics, also within the quasi-static framework of classical thermodynamics. First, we consider the efficiency at maximum work (EMW) from finite source and sink modelled as identical thermodynamic systems. The near-equilibrium regime is characterized by expanding the internal energy upto second order (i.e. upto linear response) in the difference of initial entropies of the source and the sink. It is shown that the efficiency is given by a universal expression $2 η_C / (4-η_C)$, where $η_C$ is the Carnot efficiency. Then, different sizes of source and sink are treated, by combining different numbers of copies of the same thermodynamic system. The efficiency of this process is found to be ${\boldsymbolη}_0 = η_C/ (2-γη_C)$, where the parameter $γ$ depends only on the relative size of the source and the sink. This implies that within the linear response theory, EMW is bounded as ${η_C}/{2} \le {\boldsymbolη}_0 \le {η_C}/{(2 - η_C)}$, where the upper (lower) bound is obtained with a sink much larger (smaller) in size than the source. We also remark on the behavior of the efficiency beyond linear response. △ Less

Submitted 27 August, 2015; v1 submitted 1 December, 2014; originally announced December 2014.

Comments: 11 pages, no figures. New discussion added on universality beyond linear response

Journal ref: Published version: EPL, 113 (1) 10006 (2016)

Optical and structural properties of CsI thin film photocathode

Authors: Triloki, R. Rai, B. K. Singh

Abstract: In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of 500 nm thick cesium iodide film is calculated using Tauc plot from absorbance data. Refractive index is estimated from envelope plot of transmittance data using S… ▽ More In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of 500 nm thick cesium iodide film is calculated using Tauc plot from absorbance data. Refractive index is estimated from envelope plot of transmittance data using Swanepoel's method. Absolute quantum efficiency measurement has been carried out in the wavelength range of 150 nm to 200 nm. Crystallographic nature and surface morphology are investigated by X-ray diffraction, transmission electron microscopy and atomic force microscopy techniques. In addition, elemental composition result gained by energy dispersive X-ray analysis is also reported in the present work. △ Less

Submitted 16 January, 2015; v1 submitted 19 September, 2014; originally announced September 2014.

Photoemission and optical constant measurements of Cesium Iodide thin film photocathode

Authors: Triloki, R. Rai, Nikita Gupta, Nabeel F. A. Jammal, B. K. Singh

Abstract: The performance of cesium iodide as a reflective photocathode is presented. The absolute quantum efficiency of a 500 nm thick film of cesium iodide has been measured in the wavelength range 150 nm to 200 nm. The optical absorbance has been analyzed in the wavelength range 190 nm to 900 nm and the optical band gap energy has been calculated. The dispersion properties were determined from the refrac… ▽ More The performance of cesium iodide as a reflective photocathode is presented. The absolute quantum efficiency of a 500 nm thick film of cesium iodide has been measured in the wavelength range 150 nm to 200 nm. The optical absorbance has been analyzed in the wavelength range 190 nm to 900 nm and the optical band gap energy has been calculated. The dispersion properties were determined from the refractive index using an envelope plot of the transmittance data. The morphological and elemental film composition have been investigated by atomic force microscopy and X-ray photo-electron spectroscopy techniques. △ Less

Submitted 16 January, 2015; v1 submitted 18 September, 2014; originally announced September 2014.

Effect of humid air exposure on photoemissive and structural properties of KBr thin film photocathode

Authors: R. Rai, Triloki, N. Ghosh, B. K. Singh

Abstract: We have investigated the influence of water molecule absorption on photoemissive and structural properties of potassium bromide (KBr) thin film photocathode under humid air exposure at relative humidity (RH) 65%. It is evident from photoemission measurement that the photoelectron yield of KBr photocathode is degraded exponentially with humid air exposed time. Structural studies of the "as-deposite… ▽ More We have investigated the influence of water molecule absorption on photoemissive and structural properties of potassium bromide (KBr) thin film photocathode under humid air exposure at relative humidity (RH) 65%. It is evident from photoemission measurement that the photoelectron yield of KBr photocathode is degraded exponentially with humid air exposed time. Structural studies of the "as-deposited" and "humid air aged" films reveal that there is no effect of RH on film's crystalline face centered cubic (fcc) structure. However, the average crystallite size of "humid air exposed film" KBr film has been increased as compared to "as-deposited". In addition, topographical properties of KBr film are also examined by means of scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) and it is observed that granular characteristic of film has been altered, even for short exposure to humid air. △ Less

Submitted 16 January, 2015; v1 submitted 18 September, 2014; originally announced September 2014.

Securing Software as a Service Model of Cloud Computing: Issues and Solutions

Authors: Rashmi Rai, G. Sahoo, S. Mehfuz

Abstract: Cloud computing, undoubtedly, has become the buzzword in the IT industry today. Looking at the potential impact it has on numerous business applications as well as in our everyday life, it can certainly be said that this disruptive technology is here to stay. Many of the features that make cloud computing attractive, have not just challenged the existing security system, but have also revealed new… ▽ More Cloud computing, undoubtedly, has become the buzzword in the IT industry today. Looking at the potential impact it has on numerous business applications as well as in our everyday life, it can certainly be said that this disruptive technology is here to stay. Many of the features that make cloud computing attractive, have not just challenged the existing security system, but have also revealed new security issues. This paper provides an insightful analysis of the existing status on cloud computing security issues based on a detailed survey carried by the author. It also makes an attempt to describe the security challenges in Software as a Service (SaaS) model of cloud computing and also endeavors to provide future security research directions. △ Less

Submitted 10 September, 2013; originally announced September 2013.

Journal ref: International Journal on Cloud Computing: Services and Architecture (IJCCSA) ,Vol.3, No.4, August 2013

Bounds on Thermal Efficiency from Inference

Authors: Ramandeep S. Johal, Renuka Rai, Guenter Mahler

Abstract: The problem of inference is applied to the process of work extraction from two constant heat capacity reservoirs, when the thermodynamic coordinates of the process are not fully specified. The information that is lacking, includes both the specific value of a temperature as well as the label of the reservoir to which it is assigned. The estimates for thermal efficiency reveal that uncertainty rega… ▽ More The problem of inference is applied to the process of work extraction from two constant heat capacity reservoirs, when the thermodynamic coordinates of the process are not fully specified. The information that is lacking, includes both the specific value of a temperature as well as the label of the reservoir to which it is assigned. The estimates for thermal efficiency reveal that uncertainty regarding the exact labels, reduces the maximal efficiency below the Carnot value, its minimum value being the well known Curzon-Ahlborn value. We also make an average estimate of the efficiency {\it before} the value of the temperature is revealed. It is found that if the labels are known with certainty, then in the near-equilibrium limit the efficiency scales as 1/2 of Carnot value, while if there is maximal uncertainty in the labels, then the average estimate for efficiency drops to 1/3 of Carnot value. We also suggest how infered properties of the incomplete model can be mapped to a model with complete information but with an additional source of thermodynamic irreversibility. △ Less

Submitted 27 May, 2013; originally announced May 2013.

Comments: pdflatex, 6 pages (3 figures)

Structural characterization of as-deposited cesium iodide films studied by X-ray diffraction and transmission electron microscopy techniques

Authors: Triloki, P. Garg, R. Rai, B. K. Singh

Abstract: In the present work, cesium iodide (CsI) thin films of different thickness have been prepared by thermal evaporation technique. The crystallite size and grain size of these films are compared by using X-ray diffraction (XRD) profile analysis as well as by transmission electron microscopy (TEM) counting, respectively. These two methods provide less deviation between crystallite size and grain size… ▽ More In the present work, cesium iodide (CsI) thin films of different thickness have been prepared by thermal evaporation technique. The crystallite size and grain size of these films are compared by using X-ray diffraction (XRD) profile analysis as well as by transmission electron microscopy (TEM) counting, respectively. These two methods provide less deviation between crystallite size and grain size in the case of thin CsI films of 4 nm, but there is comparatively large difference in case of thicker CsI films (20 nm, 100 nm and 500 nm). It indicates that dislocations are arranged in a configuration which causes small orientational difference between two adjacent coherent regions. The size obtained from XRD corresponds to two separate regions, whereas in the TEM micrograph the two regions may seem to correspond one region particularly in case of thicker films. Other physical parameters such as strain, stress and deformation energy density are also estimated precisely for the prominent XRD peaks of thicker CsI films in the range $2θ= 20^{0}-80^{0}$ by using a modified Williamson-Hall (W-H) analysis assuming uniform deformation model (UDM), uniform deformation stress model (UDSM) and uniform deformation energy density model (UDEDM). △ Less

Submitted 2 November, 2013; v1 submitted 23 November, 2012; originally announced November 2012.

Comments: This paper has been accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Modeling anomalous extinction using nanodiamonds

Authors: Rakesh K Rai, Shantanu Rastogi

Abstract: Modeling extinction along anomalous/non-CCM sightlines, which are characterized by a broad $217.5 nm$ bump and steep far-ultraviolet (FUV) rise, is reported. The extinction along these sightlines, viz. {HD 210121}, {HD 204827}, {HD 29647} and {HD 62542}, is difficult to reproduce using standard silicate and graphite grains. Very good match with the observed extinction is obtained by considering na… ▽ More Modeling extinction along anomalous/non-CCM sightlines, which are characterized by a broad $217.5 nm$ bump and steep far-ultraviolet (FUV) rise, is reported. The extinction along these sightlines, viz. {HD 210121}, {HD 204827}, {HD 29647} and {HD 62542}, is difficult to reproduce using standard silicate and graphite grains. Very good match with the observed extinction is obtained by considering nanodiamond component as part of carbonaceous matter. Most of these sightlines are rich in carbon and are invariably backed by a young hot stellar object. Nanodiamond is taken as core within amorphous carbon and graphite. These core-mantle particles taken as additional components along with graphite and silicates lead to reduction in the silicate requirement. The abundance of carbonaceous matter is not affected as a very small fraction of nanodiamond is required. Extinction along sightlines that show steep FUV is also reported demonstrating the importance of nanodiamond component in all such regions. △ Less

Submitted 4 January, 2013; v1 submitted 14 April, 2012; originally announced April 2012.

Comments: 16 pages, 2 Tables and 3 Figures

The scattering and extinction properties of nanodiamonds

Authors: Rakesh K Rai, Shantanu Rastogi

Abstract: The study of scattering and extinction properties of possible nanodiamond grains in the ISM are reported. Calculations using Discrete Dipole Approximation (DDA) for varying ellipsoidal shapes and sizes from 2.5 to $10 nm$ are considered. Nanodiamonds show negligible extinction from IR to near-UV and very sharp far-UV rise. Comparison with observations rule out possibility of independent nanodiam… ▽ More The study of scattering and extinction properties of possible nanodiamond grains in the ISM are reported. Calculations using Discrete Dipole Approximation (DDA) for varying ellipsoidal shapes and sizes from 2.5 to $10 nm$ are considered. Nanodiamonds show negligible extinction from IR to near-UV and very sharp far-UV rise. Comparison with observations rule out possibility of independent nanodiamond dust but point towards possibility of nanodiamonds as a component in the ISM. Radiation induced transformations may lead to carbonaceous grains with different core and mantles. So calculations are also performed for a core-mantle target model with nanodiamond core in graphite mantles. The graphite extinction features get modified with the peak at 2175 Å being lowered, broadened, blue shifted and accompanied by enhanced extinction in the far-UV. Such variations in the 2175 Å band and simultaneous far-UV rise are observed along some sources. A three component dust model incorporating silicate, graphite and graphite with nanodiamond core is also considered. The model extinction compares very well with the average galactic extinction in the complete range from 0.2 to $10 μm^{-1}$. The best fit requires small size and small number of nanodiamonds. △ Less

Submitted 2 November, 2009; originally announced November 2009.

Comments: Accepted for publication in MNRAS; 8 Figures

Spin-Charge-Lattice Coupling through Resonant Multi-Magnon Excitations in Multiferroic BiFeO3

Authors: M. O. Ramirez, A. Kumar, S. A. Denev, Y. H. Chu, J. Seidel, L. Martin, S-Y. Yang R. C. Rai, X. Xue, J. F. Ihlefeld, N. Podraza, E. Saiz, S. Lee, J. Klug, S. W. Cheong, M. J. Bedzyk, O. Auciello, D. G. Schlom, J. Orenstein, R. Ramesh, J. L. Musfeldt, A. P. Litvinchuk, V. Gopalan

Abstract: Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These… ▽ More Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These are shown to be collective interactions between on-site Fe d-d electronic resonance, phonons and multimagnons △ Less

Submitted 7 January, 2009; v1 submitted 24 March, 2008; originally announced March 2008.

Comments: 11 pages including figures

Linear and Nonlinear Optical constants of BiFeO_3

Authors: Amit Kumar, R. Rai, Nikolas Podraza, Sava Denev, Mariola Ramirez, Ying-Hao Chu, Jon Ihlefeld, Tassilo Heeg, Jurgen Schubert, Darrell Schlom, Joseph Orenstein, R. Ramesh, Robert Collins, Janice Musfeldt, Venkatraman Gopalan

Abstract: Using spectroscopic ellipsometry, the refractive index and absorption versus wavelength of the ferroelectric antiferromagnet Bismuth Ferrite, BiFeO_3 is reported. The material has a direct band-gap at 442 nm wavelength (2.81 eV). Using optical second harmonic generation, the nonlinear optical coefficients were determined to be d_15/d_22 = 0.20 +/- 0.01, d_31/d_22 = 0.35 +/- 0.02, d_33/d_22 = -11… ▽ More Using spectroscopic ellipsometry, the refractive index and absorption versus wavelength of the ferroelectric antiferromagnet Bismuth Ferrite, BiFeO_3 is reported. The material has a direct band-gap at 442 nm wavelength (2.81 eV). Using optical second harmonic generation, the nonlinear optical coefficients were determined to be d_15/d_22 = 0.20 +/- 0.01, d_31/d_22 = 0.35 +/- 0.02, d_33/d_22 = -11.4 +/- 0.20 and |d_22| = 298.4 +/- 6.1 pm/V at a fundamental wavelength of 800 nm. △ Less

Submitted 10 January, 2008; originally announced January 2008.

Comments: 4 pages, 3 figures

Optical Properties and Magnetic Field-Induced Phase Transitions in the Ferroelectric State of Ni$_3$V$_2$O$_8$

Authors: R. C. Rai, J. Cao, S. Brown, J. L. Musfeldt, D. Kasinathan, D. J. Singh, G. Lawes, N. Rogado, R. J. Cava, X. Wei

Abstract: We use a combination of optical spectra, first principles calculations, and energy dependent magneto-optical measurements to elucidate the electronic structure and to study the phase diagram of Ni$_3$V$_2$O$_8$. We find a remarkable interplay of magnetic field and optical properties that reveals additional high magnetic field phases and an unexpected electronic structure which we associate with… ▽ More We use a combination of optical spectra, first principles calculations, and energy dependent magneto-optical measurements to elucidate the electronic structure and to study the phase diagram of Ni$_3$V$_2$O$_8$. We find a remarkable interplay of magnetic field and optical properties that reveals additional high magnetic field phases and an unexpected electronic structure which we associate with the strong magneto-dielectric couplings in this material over a wide energy range. Specifically, we observed several prominent magneto-dielectric effects that derive from changes in crystal field environment around Ni spine and cross-tie centers. This effect is consistent with a field-induced modification of local structure. Symmetry-breaking effects are also evident with temperature. We find Ni$_3$V$_2$O$_8$ to be an intermediate gap, local moment band insulator. This electronic structure is particularly favorable for magneto-dielectric couplings, because the material is not subject to the spin charge separation characteristic of strongly correlated large gap Mott insulators, while at the same time remaining a magnetic insulator independent of the particular spin order and temperature. △ Less

Submitted 30 October, 2006; originally announced October 2006.

Comments: 12 figures, 11 pages, accepted in Physical Review B