-
Canard explosions in turbulent thermo-fluid systems
Authors:
Ramesh S. Bhavi,
Sivakumar Sudarsanan,
Manikandan Raghunathan,
Anaswara Bhaskaran,
R. I. Sujith
Abstract:
A sudden transition to a state of high amplitude limit cycle oscillations is catastrophic in a thermo-fluid system. Conventionally, upon varying the control parameter, a sudden transition is observed as an abrupt jump in the amplitude of the fluctuations in these systems. In contrast, we present an experimental discovery of a canard explosion in a turbulent reactive flow system where we observe a…
▽ More
A sudden transition to a state of high amplitude limit cycle oscillations is catastrophic in a thermo-fluid system. Conventionally, upon varying the control parameter, a sudden transition is observed as an abrupt jump in the amplitude of the fluctuations in these systems. In contrast, we present an experimental discovery of a canard explosion in a turbulent reactive flow system where we observe a continuous bifurcation with a rapid rise in the amplitude of the fluctuations within a narrow range of control parameters. The observed transition is facilitated via a state of bursting, consisting of the epochs of large amplitude periodic oscillations amidst the epochs of low amplitude periodic oscillations. The amplitude of the bursts is higher than the amplitude of the bursts of intermittency state in a conventional gradual transition, as reported in turbulent reactive flow systems. During the bursting state, we observe that temperature fluctuations of exhaust gas vary at a slower time scale in correlation with the amplitude envelope of the bursts. We also present a phenomenological model for thermoacoustic systems to describe the observed canard explosion. Using the model, we explain that the large amplitude bursts occur due to the slow-fast dynamics at the bifurcation regime of the canard explosion.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Control of thermoacoustic instability through Lagrangian saddle point analysis
Authors:
C. P. Premchand,
Abin Krishnan,
Manikandan Raghunathan,
Midhun Raghunath,
Reeja K. V.,
R. I. Sujith,
Vineeth Nair
Abstract:
We propose a framework of Lagrangian Coherent Structures (LCS) to elucidate the shear layers and coherent structures to understand the mechanism of generation of tonal sound during thermoacoustic instability. Experiments were performed on a bluff-body stabilized turbulent combustor in the state of thermoacoustic instability. We use dynamic mode decomposition (DMD) on the flow-field to identify dyn…
▽ More
We propose a framework of Lagrangian Coherent Structures (LCS) to elucidate the shear layers and coherent structures to understand the mechanism of generation of tonal sound during thermoacoustic instability. Experiments were performed on a bluff-body stabilized turbulent combustor in the state of thermoacoustic instability. We use dynamic mode decomposition (DMD) on the flow-field to identify dynamical regions where the acoustic frequency is dominant. We find that the separating shear layer from the backward-facing step of the combustor envelops a cylindrical vortex in the outer recirculation zone (ORZ), eventually im**ing on the top wall of the combustor during thermoacoustic instability. The production of tonal sound is due to the synchronous motion of this shear layer with the shear layer emerging from the leading edge of the bluff-body causing the fluid to squeeze and expand between them periodically. To de-synchronize the oscillations in an optimal manner, we track the Lagrangian saddle points in the shear layer emerging from the backward facing step over several acoustic cycles. A passive control strategy is then developed by injecting a steady stream of secondary air targeting the optimal locations thus identified. After implementing the control action, the flow-field is also analysed using LCS to understand the key differences in flow dynamics. We find that the shear layer emerging from the dump plane are deflected in a direction almost parallel to the axis of the combustor after the control action. This deflection in turn prevents the shear layer from envelo** the vortex and im**ing on the combustor walls, resulting in a drastic reduction of the amplitude of the acoustic field.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
Control of growth of local heat release rate fluctuations to suppress thermoacoustic instability
Authors:
M. Raghunathan,
N. B. George,
V. R Unni,
J. Kurths,
E. Surovyatkina,
R. I. Sujith
Abstract:
This experimental study investigates the dynamical transition from stable operation to thermoacoustic instability in a turbulent bluff-body stabilized dump combustor. We conduct experiments to characterize the dynamical transition utilizing acoustic pressure and local heat release rate fluctuations. We observe the transition to thermoacoustic instability for these experiments as we decrease the eq…
▽ More
This experimental study investigates the dynamical transition from stable operation to thermoacoustic instability in a turbulent bluff-body stabilized dump combustor. We conduct experiments to characterize the dynamical transition utilizing acoustic pressure and local heat release rate fluctuations. We observe the transition to thermoacoustic instability for these experiments as we decrease the equivalence ratio towards a fuel-lean setting. More importantly, we observe significant growth of local heat release rate fluctuations near the bluff-body well before the appearance of large-scale spatial or temporal patterns during the occurrence of thermoacoustic instability. By strategically positioning slots (perforations) on the bluff-body, we ensure the reduction of the growth of local heat release rate fluctuations at the stagnation zone near the bluff-body at operating conditions far away from the onset of thermoacoustic instability. This reduction in the local heat release rate fluctuations ensures that the transition to thermoacoustic instability is avoided. We find that modified configurations of the bluff-body that do not quench these local heat release rate fluctuations at the stagnation zone results in the transition to thermoacoustic instability. We also reveal that an effective suppression strategy based on the growth of local heat release rate fluctuations requires an optimization of the area ratio of the slots for a given bluff-body position. Further, the suppression strategy also depends on the spatial distribution of perforations on the bluff-body. Notably, an inappropriate distribution of the slots which does not quench the local heat release rate fluctuations at the stagnation zone may even result in a dramatic increase in amplitudes of pressure oscillations.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
The 21N-moment multi-temperature coefficients for Zhdanov closure
Authors:
Madhusudan Raghunathan,
Yannick Marandet,
Hugo Bufferand,
Guido Ciraolo,
Philippe Ghendrih,
Patrick Tamain,
Eric Serre
Abstract:
We provide the 21N-moment multi-temperature collision coefficients for the Boltzmann collision operator using the Sonine-Hermite polynomial ansatz in the style of Zhdanov et al. First, we outline the general derivation method. Then, we provide the collision coefficients in the most general form in terms of the Chapman-Cowling integrals for any potential of interaction for the 21N-moment approximat…
▽ More
We provide the 21N-moment multi-temperature collision coefficients for the Boltzmann collision operator using the Sonine-Hermite polynomial ansatz in the style of Zhdanov et al. First, we outline the general derivation method. Then, we provide the collision coefficients in the most general form in terms of the Chapman-Cowling integrals for any potential of interaction for the 21N-moment approximation. Then, we provide the the collision coefficients for the specific case of the approximated Coulomb potential cross-section with Debye cutoff. These coefficients help in order to find easy implementation in current SOL/edge fluid packages which currently implement the 21N-moment single-temperature coefficients. This provides the completion of a missing link in the current literature.
△ Less
Submitted 5 December, 2023; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Multi-temperature Generalized Zhdanov Closure for Scrape-Off Layer/Edge Applications
Authors:
Madhusudan Raghunathan,
Yannick Marandet,
Hugo Bufferand,
Guido Ciraolo,
Philippe Ghendrih,
Patrick Tamain,
Eric Serre
Abstract:
The derivation of the multi-temperature generalized Zhdanov closure is provided starting from the most general form of the left hand side of the moment averaged kinetic equation with the Sonine-Hermite polynomial ansatz for an arbitrary number of moments. The process of arriving at the reduced higher-order moment equations, with its assumptions and approximations, is explicitly outlined. The gener…
▽ More
The derivation of the multi-temperature generalized Zhdanov closure is provided starting from the most general form of the left hand side of the moment averaged kinetic equation with the Sonine-Hermite polynomial ansatz for an arbitrary number of moments. The process of arriving at the reduced higher-order moment equations, with its assumptions and approximations, is explicitly outlined. The generalized multi-species, multi-temperature coefficients from the authors' previous article are used to compute values of higher order moments such as heat flux in terms of the lower order moments. Transport coefficients and the friction and thermal forces for magnetic confinement fusion relevant cases with the generalized coefficients are compared to the scheme with the single-temperature coefficients previously provided by Zhdanov et al. It is found that the 21N-moment multi-temperature coefficients are adequate for most cases relevant to fusion. Furthermore, the 21N-moment scheme is also tested against the trace approximation to determine the range of validity of the trace approximation with respect to fusion relevant plasmas. Possible refinements to the closure scheme are illustrated as well, in order to account for quantities which might be significant in certain schemes such as the drift approximation.
△ Less
Submitted 30 May, 2023; v1 submitted 19 July, 2021;
originally announced July 2021.
-
Generalized Collisional Fluid Theory for Multi-Component, Multi-Temperature Plasma Using The Linearized Boltzmann Collision Operator for Scrape-Off Layer/Edge Applications
Authors:
Madhusudan Raghunathan,
Yannick Marandet,
Hugo Bufferand,
Guido Ciraolo,
Philippe Ghendrih,
Patrick Tamain,
Eric Serre
Abstract:
Grad's method is used on the linearized Boltzmann collision operator to derive the most general expressions for the collision coefficients for a multi-component, multi-temperature plasma up to rank-2. In doing so, the collision coefficients then get expressed as series sum of pure coefficients of temperature and mass ratios multiplied by the cross-section dependent Chapman-Cowling integrals. These…
▽ More
Grad's method is used on the linearized Boltzmann collision operator to derive the most general expressions for the collision coefficients for a multi-component, multi-temperature plasma up to rank-2. In doing so, the collision coefficients then get expressed as series sum of pure coefficients of temperature and mass ratios multiplied by the cross-section dependent Chapman-Cowling integrals. These collisional coefficients are compared to previously obtained coefficients by Zhdanov et al [Zhdanov V.M., Transport processes in multi-component plasma, Taylor and Francis (2002)] for 13N-moment multi-temperature scheme. First, the differences in coefficients are compared directly, and then the differences in first approximation to viscosity and friction force are compared. For the 13N-moment multi-temperature coefficients, it is found that they behave reasonably similarly for small temperature differences, but display substantial differences in the coefficients when the temperature differences are high, both for the coefficients and for viscosity and friction force values. Furthermore, the obtained coefficients are compared to the 21N-moment single-temperature approximation provided by Zhdanov et al, and it is seen that the differences are higher than the 13N-moment multi-temperature coefficients, and have substantial differences even in the vicinity of equal temperatures, especially for the viscosity and friction force calculations.
△ Less
Submitted 5 December, 2023; v1 submitted 3 March, 2021;
originally announced March 2021.
-
Critical region in the spatiotemporal dynamics of a turbulent thermoacoustic system and smart passive control
Authors:
Amitesh Roy,
C P Premchand,
Manikandan Raghunathan,
Abin Krishnan,
Vineeth Nair,
R I Sujith
Abstract:
We develop a passive control strategy for suppressing thermoacoustic instability in a bluff-body stabilized premixed turbulent combustor. When the equivalence ratio is varied, there is a transition from combustion noise to thermoacoustic instability via intermittency in the combustor. We perform simultaneous acoustic pressure, 2D-PIV, and CH$^*$ chemiluminescence measurements to capture the pressu…
▽ More
We develop a passive control strategy for suppressing thermoacoustic instability in a bluff-body stabilized premixed turbulent combustor. When the equivalence ratio is varied, there is a transition from combustion noise to thermoacoustic instability via intermittency in the combustor. We perform simultaneous acoustic pressure, 2D-PIV, and CH$^*$ chemiluminescence measurements to capture the pressure fluctuations, the velocity field, and the heat release rate (HRR) field during the transition. We measure the spatial distribution of the amplitude of turbulent velocity at the acoustic frequency, time-averaged vorticity, time-averaged HRR, and Rayleigh index and identify various regions of significance. We implement a passive control strategy by targeting these regions with a steady injection of secondary micro-jet of air to optimize the injection location and determine the critical region. Targeting the critical region with secondary air leads to greater than 20 dB suppression of the dominant thermoacoustic mode. We observe that the coherent structure forming from the shear layer following the dump plane gets suppressed, leading to an incoherent spatial distribution of HRR fluctuations. We find that the turbulent velocity amplitude correctly identifies the critical region for optimized passive control during thermoacoustic instability. In contrast, the Rayleigh index identifies the region of the most significant acoustic driving; however, it does not identify the region most sensitive to control. Finally, we extend our analysis by determining the spatial distribution of the Hurst exponent measured from the turbulent velocity field. We show that the Hurst exponent identifies the critical region during thermoacoustic instability and intermittency, unlike the other physical measures.
△ Less
Submitted 3 November, 2020; v1 submitted 17 June, 2020;
originally announced June 2020.
-
The congruence subgroup problem
Authors:
M S Raghunathan
Abstract:
This is a short survey of the progress on the congruence subgroup problem since the sixties when the first major results on the integral unimodular groups appeared. It is aimed at the non-specialists and avoids technical details.
This is a short survey of the progress on the congruence subgroup problem since the sixties when the first major results on the integral unimodular groups appeared. It is aimed at the non-specialists and avoids technical details.
△ Less
Submitted 5 March, 2005;
originally announced March 2005.