-
Tight focal spots using azimuthally polarised light from a Fresnel cone
Authors:
R. D. Hawley,
R. Offer,
N. Radwell,
S. Franke-Arnold
Abstract:
When focusing a light beam at high numerical aperture, the resulting electric field profile in the focal plane depends on the transverse polarisation profile, as interference between different parts of the beam needs to be taken into account. It is well known that radial polarised light produces a longitudinal polarisation component and can be focused below the conventional diffraction limit for h…
▽ More
When focusing a light beam at high numerical aperture, the resulting electric field profile in the focal plane depends on the transverse polarisation profile, as interference between different parts of the beam needs to be taken into account. It is well known that radial polarised light produces a longitudinal polarisation component and can be focused below the conventional diffraction limit for homogeneously polarised light, and azimuthally polarised light that carries one unit of angular momentum can achieve even tighter focal spots. This is of interest for example for enhancing resolution in scanning microscopy. There are numerous ways to generate such polarisation structures, however, setups can be expensive and usually rely on birefringent components, hence prohibiting broadband operation. We have recently demonstrated a passive, low-cost technique using a simple glass cone (Fresnel cone) to generate beams with structured polarisation. We show here that the polarisation structure generated by Fresnel cones focuses better than radial polarised light at all numerical apertures. Furthermore, we investigate in detail the application of polarised light structures for two-photon microscopy. Specifically we demonstrate a method that allows us to generate the desired polarisation structure at the back aperture of the microscope by pre-compensating any detrimental phase shifts using a combination of waveplates.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Passive broadband full Stokes polarimeter using a Fresnel cone
Authors:
Ryan D. Hawley,
John Cork,
Neal Radwell,
Sonja Franke-Arnold
Abstract:
Light's polarisation contains information about its source and interactions, from distant stars to biological samples. Polarimeters can recover this information, but reliance on birefringent or rotating optical elements limits their wavelength range and stability. Here we present a static, single-shot polarimeter based on a Fresnel cone - the direct spatial analogue to the popular rotating quarter…
▽ More
Light's polarisation contains information about its source and interactions, from distant stars to biological samples. Polarimeters can recover this information, but reliance on birefringent or rotating optical elements limits their wavelength range and stability. Here we present a static, single-shot polarimeter based on a Fresnel cone - the direct spatial analogue to the popular rotating quarter-wave plate approach. We measure the average angular accuracy to be 2.9 (3.6) degrees for elliptical(linear) polarisation states across the visible spectrum, with the degree of polarisation determined to within 0.12(0.08). Our broadband full Stokes polarimeter is robust, cost-effective, and could find applications in hyper-spectral polarimetry and scanning microscopy.
△ Less
Submitted 16 August, 2018;
originally announced August 2018.
-
Holographically controlled three-dimensional atomic population patterns
Authors:
Adam Selyem,
Sylvain Fayard,
Thomas W. Clark,
Aidan S. Arnold,
Neal Radwell,
Sonja Franke-Arnold
Abstract:
The interaction of spatially structured light fields with atomic media can generate spatial structures inscribed in the atomic populations and coherences, allowing for example the storage of optical images in atomic vapours. Typically, this involves coherent optical processes based on Raman or EIT transitions. Here we study the simpler situation of sha** atomic populations via spatially dependen…
▽ More
The interaction of spatially structured light fields with atomic media can generate spatial structures inscribed in the atomic populations and coherences, allowing for example the storage of optical images in atomic vapours. Typically, this involves coherent optical processes based on Raman or EIT transitions. Here we study the simpler situation of sha** atomic populations via spatially dependent optical depletion. Using a near resonant laser beam with a holographically controlled 3D intensity profile, we imprint 3D population structures into a thermal rubidium vapour. This 3D population structure is simultaneously read out by recording the spatially resolved fluorescence of an unshaped probe laser. We find that the reconstructed atomic population structure is largely complementary to the intensity structure of the control beam, however appears blurred due to global repopulation processes. We identify and model these mechanisms which limit the achievable resolution of the 3D atomic population. We expect this work to set design criteria for future 2D and 3D atomic memories.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Observation of mode-locked spatial laser solitons
Authors:
F. Gustave,
N. Radwell,
C. McIntyre,
J. P. Toomey,
D. M. Kane,
S. Barland,
W. J. Firth,
G. -L. Oppo,
T. Ackemann
Abstract:
A stable nonlinear wave packet, self-localized in all three dimensions, is an intriguing and much sought after object in nonlinear science in general and in nonlinear photonics in particular. We report on the experimental observation of mode-locked spatial laser solitons in a vertical-cavity surface-emitting laser with frequency-selective feedback from an external cavity. These spontaneously emerg…
▽ More
A stable nonlinear wave packet, self-localized in all three dimensions, is an intriguing and much sought after object in nonlinear science in general and in nonlinear photonics in particular. We report on the experimental observation of mode-locked spatial laser solitons in a vertical-cavity surface-emitting laser with frequency-selective feedback from an external cavity. These spontaneously emerging and long-term stable spatio-temporal structures have a pulse length shorter than the cavity round trip time and may pave the way to completely independent cavity light bullets.
△ Less
Submitted 11 December, 2016; v1 submitted 17 November, 2016;
originally announced November 2016.
-
Single-pixel 3D imaging with time-based depth resolution
Authors:
Ming-Jie Sun,
Matthew. P. Edgar,
Graham M. Gibson,
Baoqing Sun,
Neal Radwell,
Robert Lamb,
Miles J. Padgett
Abstract:
Time-of-flight three dimensional imaging is an important tool for many applications, such as object recognition and remote sensing. Unlike conventional imaging approach using pixelated detector array, single-pixel imaging based on projected patterns, such as Hadamard patterns, utilises an alternative strategy to acquire information with sampling basis. Here we show a modified single-pixel camera u…
▽ More
Time-of-flight three dimensional imaging is an important tool for many applications, such as object recognition and remote sensing. Unlike conventional imaging approach using pixelated detector array, single-pixel imaging based on projected patterns, such as Hadamard patterns, utilises an alternative strategy to acquire information with sampling basis. Here we show a modified single-pixel camera using a pulsed illumination source and a high-speed photodiode, capable of reconstructing 128x128 pixel resolution 3D scenes to an accuracy of ~3 mm at a range of ~5 m. Furthermore, we demonstrate continuous real-time 3D video with a frame-rate up to 12 Hz. The simplicity of the system hardware could enable low-cost 3D imaging devices for precision ranging at wavelengths beyond the visible spectrum.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
Spatially dependent electromagnetically induced transparency
Authors:
Neal Radwell,
Thomas W. Clark,
Bruno Piccirillo,
Stephen M. Barnett,
Sonja Franke-Arnold
Abstract:
Recent years have seen vast progress in the generation and detection of structured light, with potential applications in high capacity optical data storage and continuous variable quantum technologies. Here we measure the transmission of structured light through cold rubidium atoms and observe regions of electromagnetically induced transparency (EIT). We use q-plates to generate a probe beam with…
▽ More
Recent years have seen vast progress in the generation and detection of structured light, with potential applications in high capacity optical data storage and continuous variable quantum technologies. Here we measure the transmission of structured light through cold rubidium atoms and observe regions of electromagnetically induced transparency (EIT). We use q-plates to generate a probe beam with azimuthally varying phase and polarisation structure, and its right and left circular polarisation components provide the probe and control of an EIT transition. We observe an azimuthal modulation of the absorption profile that is dictated by the phase and polarisation structure of the probe laser. Conventional EIT systems do not exhibit phase sensitivity. We show, however, that a weak transverse magnetic field closes the EIT transitions, thereby generating phase dependent dark states which in turn lead to phase dependent transparency, in agreement with our measurements.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
3D Beam Reconstruction by Fluorescence Imaging
Authors:
Neal Radwell,
Mordjane Alissa Boukhet,
Sonja Franke-Arnold
Abstract:
We present a technique for map** the complete 3D spatial intensity profile of a laser beam from its fluorescence in an atomic vapour. We propagate shaped light through a rubidium vapour cell and record the resonant scattering from the side. From a single measurement we obtain a camera limited resolution of 200 x 200 transverse points and 659 longitudinal points. In constrast to invasive methods…
▽ More
We present a technique for map** the complete 3D spatial intensity profile of a laser beam from its fluorescence in an atomic vapour. We propagate shaped light through a rubidium vapour cell and record the resonant scattering from the side. From a single measurement we obtain a camera limited resolution of 200 x 200 transverse points and 659 longitudinal points. In constrast to invasive methods in which the camera is placed in the beam path, our method is capable of measuring patterns formed by counterpropagating laser beams. It has high resolution in all 3 dimensions, is fast and can be completely automated. The technique has applications in areas which require complex beam shapes, such as optical tweezers, atom trap** and pattern formation.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Ultra high densities of cold atoms in a holographically controlled dark SPOT trap
Authors:
Neal Radwell,
Graeme Walker,
Sonja Franke-Arnold
Abstract:
We demonstrate an atom trap geometry for 87Rb which is capable of producing ultra high atom densities. Reradiation forces, which usually limit high densities, can be avoided in dark spontaneous-force optical traps (dark SPOTs) by sheltering atoms from intense trap** light. Here we demonstrate a dynamic implementation of a dark SPOT, resulting in an increase in atom density by almost two orders o…
▽ More
We demonstrate an atom trap geometry for 87Rb which is capable of producing ultra high atom densities. Reradiation forces, which usually limit high densities, can be avoided in dark spontaneous-force optical traps (dark SPOTs) by sheltering atoms from intense trap** light. Here we demonstrate a dynamic implementation of a dark SPOT, resulting in an increase in atom density by almost two orders of magnitude up to 1.3x10^12cm-3. Holographic control of the trap** beams and dynamic switching between MOT and dark SPOT configuration allows us to optimise the trap** geometry. We have identified the ideal size of the dark core to be six times larger than the MOT. Our method also avoids unwanted heating so that we reach a record phase-space density for a MOT.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Adler synchronization of spatial laser solitons pinned by defects
Authors:
P. V. Paulau,
C. McIntyre,
Y. Noblet,
N. Radwell,
W. J. Firth,
P. Colet,
T. Ackemann,
G. -L. Oppo
Abstract:
Defects due to growth fluctuations in broad-area semiconductor lasers induce pinning and frequency shifts of spatial laser solitons. The effects of defects on the interaction of two solitons are considered in lasers with frequency-selective feedback both theoretically and experimentally. We demonstrate frequency and phase synchronization of paired laser solitons as their detuning is varied. In bot…
▽ More
Defects due to growth fluctuations in broad-area semiconductor lasers induce pinning and frequency shifts of spatial laser solitons. The effects of defects on the interaction of two solitons are considered in lasers with frequency-selective feedback both theoretically and experimentally. We demonstrate frequency and phase synchronization of paired laser solitons as their detuning is varied. In both theory and experiment the locking behavior is well described by the Adler model for the synchronization of coupled oscillators.
△ Less
Submitted 20 December, 2011;
originally announced December 2011.
