-
Fabrication of angstrom-scale two-dimensional channels for mass transport
Authors:
Ankit Bhardwaj,
Marcos Vinicius Surmani Martins,
Yi You,
Ravalika Sajja,
Max Rimmer,
Solleti Goutham,
Rongrong Qi,
Sidra Abbas Dar,
Boya Radha,
Ashok Keerthi
Abstract:
Fluidic channels at atomic scales regulate cellular trafficking and molecular filtration across membranes and thus play crucial roles in the functioning of living systems. However, constructing synthetic channels experimentally at these scales has been a significant challenge due to the limitations in nanofabrication techniques and the surface roughness of the commonly used materials. Angstrom-sca…
▽ More
Fluidic channels at atomic scales regulate cellular trafficking and molecular filtration across membranes and thus play crucial roles in the functioning of living systems. However, constructing synthetic channels experimentally at these scales has been a significant challenge due to the limitations in nanofabrication techniques and the surface roughness of the commonly used materials. Angstrom-scale slit-like channels address this challenge, as these can be made with precise control over their dimensions and can be used to study the fluidic properties of gases, ions and water at unprecedented scales. Here, we provide a detailed fabrication method of the two-dimensional (2D) angstrom-scale channels, which can be assembled as a single channel or up to hundreds of channels made with atomic scale precision using layered crystals. The procedure includes the fabrication of the substrate, flake, spacer layer, flake transfers, van der Waals assembly, and post-processing. We further explain how to perform molecular transport measurements with the angstrom-scale channels, for the development of methods directed at unravelling interesting and anomalous phenomena that help shed light on the physics of nanofluidic transport systems. The procedure requires a total of 1 to 2 weeks for the fabrication of the 2D channel device and is suitable for users with prior experience in clean room working environments and nanofabrication.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
A New Optimization Methodology for Polar Direct Drive Illuminations at the National Ignition Facility
Authors:
Duncan Barlow,
A. Colaïtis,
D. Viala,
M. J. Rosenberg,
I. Igumenshchev,
V. Goncharov,
L. Ceurvorst,
P. B. Radha,
W. Theobald,
R. S. Craxton,
M. J. V. Streeter,
T. Chapman,
J. Mathiaud,
R. H. H. Scott,
K. Glize
Abstract:
A new, efficient, algorithmic approach to create illumination configurations for laser driven high energy density physics experiments is proposed. The method is applied to a polar direct drive solid target experiment at the National Ignition Facility (NIF), where it is simulated to create more than x2 higher peak pressure and x1.4 higher density by maintaining better shock uniformity. The analysis…
▽ More
A new, efficient, algorithmic approach to create illumination configurations for laser driven high energy density physics experiments is proposed. The method is applied to a polar direct drive solid target experiment at the National Ignition Facility (NIF), where it is simulated to create more than x2 higher peak pressure and x1.4 higher density by maintaining better shock uniformity. The analysis is focused on projecting shocks into solid targets at the NIF, but with minor adaptations the method could be applied to implosions, other target geometries and other facilities.
△ Less
Submitted 29 December, 2023; v1 submitted 30 November, 2023;
originally announced November 2023.
-
Stray magnetic field imaging of thin exfoliated iron halides flakes
Authors:
Fernando Meneses,
Rongrong Qi,
Alexander J. Healey,
Yi You,
Islay O. Robertson,
Sam C. Scholten,
Ashok Keerthi,
Gary Harrison,
Lloyd C. L. Hollenberg,
Boya Radha,
Jean-Philippe Tetienne
Abstract:
Magnetic van der Waals materials are often proposed for use in future spintronic devices, aiming to leverage the combination of long-range magnetic order and near-atomic thinness to produce energy-efficient components. One class of material that has been discussed in this context are the iron halides FeCl$_2$ and FeBr$_2$, which are A-type antiferromagnets with strong uniaxial magnetocrystalline a…
▽ More
Magnetic van der Waals materials are often proposed for use in future spintronic devices, aiming to leverage the combination of long-range magnetic order and near-atomic thinness to produce energy-efficient components. One class of material that has been discussed in this context are the iron halides FeCl$_2$ and FeBr$_2$, which are A-type antiferromagnets with strong uniaxial magnetocrystalline anisotropy. However, despite characterization of the bulk materials, the possibility for sustaining the magnetic behaviors that would underpin such applications in thin flakes has not been investigated. In this work, we use nitrogen-vacancy (NV) center microscopy to quantitatively image magnetism in individual exfoliated flakes of these iron halides, revealing the absence of magnetic remanence, a weak induced magnetization under bias field and variable behavior versus temperature. We show that our results are consistent with the antiferromagnetic behavior of the bulk material with a soft ferromagnetic uncompensated layer, indicating that extended ($>1~μ$m) ferromagnetic domains are not sustained even at low temperatures (down to 4 K). Finally, we find that the magnetic order is strongly affected by the sample preparation, with a surprising diamagnetic order observed in a thin, hydrated sample.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Beyond steric selectivity of ions using angstrom-scale capillaries
Authors:
Solleti Goutham,
Ashok Keerthi,
Abdulghani Ismail,
Ankit Bhardwaj,
Hossein Jalali,
Yi You,
Yiheng Li,
Nassim Hassani,
Haoke Peng,
Marcos Vinicius Surmani Martins,
Fengchao Wang,
Mehdi Neek-Amal,
Boya Radha
Abstract:
Ion-selective channels play a key role in physiological processes and are used in many technologies. While biological channels can efficiently separate same-charge ions with similar hydration shells, it remains a challenge to mimic such exquisite selectivity using artificial solid-state channels. Although, there are several nanoporous membranes that show high selectivity with respect to certain io…
▽ More
Ion-selective channels play a key role in physiological processes and are used in many technologies. While biological channels can efficiently separate same-charge ions with similar hydration shells, it remains a challenge to mimic such exquisite selectivity using artificial solid-state channels. Although, there are several nanoporous membranes that show high selectivity with respect to certain ions, the underlying mechanisms are based on the hydrated ion size and/or charge. There is a need to rationalize the design of artificial channels to make them capable of selecting between similar-size same-charge ions, which in turn requires understanding of why and how such selectivity can occur. To address this issue, we study angstrom-scale artificial channels made by van der Waals assembly, which are comparable in size with typical ions and carry little residual charge on channel walls. This allows us to exclude the first-order effects of steric and Coulomb-based exclusion. We show that the studied two-dimensional angstrom-scale capillaries can distinguish between same-charge ions with similar hydrated diameters. The selectivity is attributed to different positions occupied by ions within the layered structure of nanoconfined water, which depend on the ion-core size and differ for anions and cations. The revealed mechanism points at possibilities of ion separation beyond the simple steric sieving.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Long-term memory and synapse-like dynamics in two-dimensional nanofluidic channels
Authors:
P. Robin,
T. Emmerich,
A. Ismail,
A. Niguès,
Y. You,
G. -H. Nam,
A. Keerthi,
A. Siria,
A. K. Geim,
B. Radha,
L. Bocquet
Abstract:
Fine-tuned ion transport across nanoscale pores is key to many biological processes such as neurotransmission. Recent advances have enabled the confinement of water and ions to two dimensions, unveiling transport properties unreachable at larger scales and triggering hopes to reproduce the ionic machinery of biological systems. Here we report experiments demonstrating the emergence of memory in th…
▽ More
Fine-tuned ion transport across nanoscale pores is key to many biological processes such as neurotransmission. Recent advances have enabled the confinement of water and ions to two dimensions, unveiling transport properties unreachable at larger scales and triggering hopes to reproduce the ionic machinery of biological systems. Here we report experiments demonstrating the emergence of memory in the transport of aqueous electrolytes across (sub)nanoscale channels. We unveiled two types of nanofluidic memristors, depending on channel material and confinement, with memory from minutes to hours. We explained how large timescales could emerge from interfacial processes like ionic self-assembly or surface adsorption. Such behavior allowed us to implement Hebbian learning with nanofluidic systems. This result lays the ground for biomimetic computations on aqueous electrolytic chips.
△ Less
Submitted 17 January, 2023; v1 submitted 16 May, 2022;
originally announced May 2022.
-
Strong electronic winds blowing under liquid flows on carbon surfaces
Authors:
Mathieu Lizée,
Alice Marcotte,
Baptiste Coquinot,
Nikita Kavokine,
Karen Sobnath,
Clément Barraud,
Ankit Bhardwaj,
Boya Radha,
Antoine Niguès,
Lydéric Bocquet,
Alessandro Siria
Abstract:
The interface between a liquid and a solid is the location of plethora of intrincate mechanisms at the nanoscale, at the root of their specific emerging properties in natural processes or technological applications. However, while the structural properties and chemistry of interfaces have been intensively explored, the effect of the solid-state electronic transport at the fluid interface has been…
▽ More
The interface between a liquid and a solid is the location of plethora of intrincate mechanisms at the nanoscale, at the root of their specific emerging properties in natural processes or technological applications. However, while the structural properties and chemistry of interfaces have been intensively explored, the effect of the solid-state electronic transport at the fluid interface has been broadly overlooked up to now. It has been reported that water flowing against carbon-based nanomaterials, such as carbon nanotubes or graphene sheets, does induce electronic currents, but the mechanism at stake remains controversial. Here, we unveil the molecular mechanisms underlying the hydro-electronic couplings by investigating the electronic conversion under flow at the nanoscale. We use a tuning fork-Atomic Force Microscope (AFM) to deposit and displace a micrometric droplet of both ionic and non-ionic liquids on a multilayer graphene sample, while recording the electrical current across the carbon flake. We report measurements of an oscillation-induced current which is several orders of magnitude larger than previously reported for water on carbon , and further boosted by the presence of surface wrinkles on the carbon layer. Our results point to a peculiar momentum transfer mechanism between fluid molecules and charge carriers in the carbon walls mediated by phonon excitations in the solid. Our findings pave the way for active control of fluid transfer at the nanoscale by harnessing the complex interplay between collective excitations in the solid and the molecules in the fluid.
△ Less
Submitted 12 January, 2023; v1 submitted 10 May, 2022;
originally announced May 2022.
-
Liquid-activated quantum emission from pristine hexagonal boron nitride for nanofluidic sensing
Authors:
Nathan Ronceray,
Yi You,
Evgenii Glushkov,
Martina Lihter,
Benjamin Rehl,
Tzu-Heng Chen,
Gwang-Hyeon Nam,
Fanny Borza,
Kenji Watanabe,
Takashi Taniguchi,
Sylvie Roke,
Ashok Keerthi,
Jean Comtet,
Boya Radha,
Aleksandra Radenovic
Abstract:
Liquids confined down to the atomic scale can show radically new properties. However, only indirect and ensemble measurements operate in such extreme confinement, calling for novel optical approaches enabling direct imaging at the molecular level. Here, we harness fluorescence originating from single-photon emitters at the surface of hexagonal boron nitride (hBN) for molecular imaging and sensing…
▽ More
Liquids confined down to the atomic scale can show radically new properties. However, only indirect and ensemble measurements operate in such extreme confinement, calling for novel optical approaches enabling direct imaging at the molecular level. Here, we harness fluorescence originating from single-photon emitters at the surface of hexagonal boron nitride (hBN) for molecular imaging and sensing in nanometrically confined liquids. The emission originates from the chemisorption of organic solvent molecules onto native surface defects, revealing single-molecule dynamics at the interface through spatially correlated activation of neighboring defects. Emitter spectra further offer a direct readout of local dielectric properties, unveiling increasing dielectric order under nanometer-scale confinement. Liquid-activated native hBN defects bridge the gap between solid-state nanophotonics and nanofluidics, opening new avenues for nanoscale sensing and optofluidics.
△ Less
Submitted 22 August, 2023; v1 submitted 13 April, 2022;
originally announced April 2022.
-
Angstrofluidics: walking to the limit
Authors:
Yi You,
Abdulghani Ismail,
Gwang-Hyeon Nam,
Solleti Goutham,
Ashok Keerthi,
Boya Radha
Abstract:
Angstrom-scale fluidic channels are ubiquitous in nature, and play an important role in regulating cellular traffic, signaling, and responding to stimuli. Synthetic channels are now a reality with the emergence of several cutting-edge bottom-up and top-down fabrication methods. In particular, the use of atomically thin two dimensional (2D) materials and nanotubes as components to build fluidic con…
▽ More
Angstrom-scale fluidic channels are ubiquitous in nature, and play an important role in regulating cellular traffic, signaling, and responding to stimuli. Synthetic channels are now a reality with the emergence of several cutting-edge bottom-up and top-down fabrication methods. In particular, the use of atomically thin two dimensional (2D) materials and nanotubes as components to build fluidic conduits has pushed the limits of fabrication to the Angstrom-scale. Here, we provide an overview of the recent developments in the fabrication methods for nano- and angstrofluidic channels while categorizing them on the basis of dimensionality (0D pores, 1D tubes, 2D slits), along with the latest advances in measurement techniques. We discuss the ionic transport governed by various stimuli in these channels and draw comparison of ionic mobility, streaming and osmotic power, with varying pore sizes across all the dimensionalities. Towards the end of the review, we highlight the unique future opportunities in the development of smart ionic devices.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
Hydrocarbon Contamination in Angstrom-scale Channels
Authors:
Ravalika Sajja,
Yi You,
Rongrong Qi,
Goutham Solleti,
Ankit Bhardwaj,
Alexander Rakowski,
Sarah Haigh,
Ashok Keerthi,
Boya Radha
Abstract:
Nonspecific molecular adsorption like airborne contamination occurs on most surfaces including those of 2D materials and alters their properties. While the surface contamination is studied using a plethora of techniques, the effect of contamination on a confined system such as nanochannels, nanopores leading to their clogging is still lacking. We report a systematic investigation of hydrocarbon ad…
▽ More
Nonspecific molecular adsorption like airborne contamination occurs on most surfaces including those of 2D materials and alters their properties. While the surface contamination is studied using a plethora of techniques, the effect of contamination on a confined system such as nanochannels, nanopores leading to their clogging is still lacking. We report a systematic investigation of hydrocarbon adsorption in the angstrom slit channels of varied heights. Hexane is chosen to mimic the hydrocarbon contamination and the clogging of the angstrom-channels is evaluated via a Helium gas flow measurement. The level of the hexane adsorption, in other words, the degree of clogging depends on the size difference between the channels and hexane. A dynamic transition of the clogging and revival process is shown in sub-2 nm thin channels. Long-term storage and stability of our angstrom-channels is demonstrated here up to three years, alleviating the contamination and unclogging the channels using thermal treatment. This study highlights the importance of the nanochannels stability and demonstrates self-cleansing nature of sub-2 nm thin channels enabling a robust platform for molecular transport and separation studies. We provide a method to assess the cleanliness of the nanoporous membranes, which is vital for the practical applications of nanofluidics in various fields such as molecular sensing, separation and power generation.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Implementing a microphysics model in hydrodynamic simulations to study the initial plasma formation in dielectric ablator materials for direct-drive implosions
Authors:
Arnab Kar,
S. X. Hu,
G. Duchateau,
J. Carroll-Nellenback,
P. B. Radha
Abstract:
A microphysics model to describe the photoionization and impact ionization processes in dielectric ablator materials like plastic has been implemented into the one-dimensional hydrodynamic code LILAC for planar and spherical targets. At present, the initial plasma formation during the early stages of a laser drive is modeled in an ad hoc manner, until the formation of a critical surface. Implement…
▽ More
A microphysics model to describe the photoionization and impact ionization processes in dielectric ablator materials like plastic has been implemented into the one-dimensional hydrodynamic code LILAC for planar and spherical targets. At present, the initial plasma formation during the early stages of a laser drive is modeled in an ad hoc manner, until the formation of a critical surface. Implementation of the physics-based models predicts higher values of electron temperature and pressure than the ad hoc model. Moreover, the numerical predictions are consistent with previous experimental observations of the shine-through mechanism in plastic ablators. For planar targets, a decompression of the rear end of the target was observed that is similar to recent experiments. An application of this model is to understand the laser-imprint mechanism that is caused by nonuniform laser irradiation due to a single beam speckle.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Molecular streaming and its voltage control in ångström scale channels
Authors:
Timothée Mouterde,
Ashok Keerthi,
Anthony. R. Poggioli,
Sidra A. Dar,
Alessandro Siria,
Andre K. Geim,
Lydéric Bocquet,
Boya Radha
Abstract:
The field of nanofluidics has shown considerable progress over the past decade thanks to key instrumental advances, leading to the discovery of a number of exotic transport phenomena for fluids and ions under extreme confinement. Recently, van der Waals assembly of 2D materials allowed fabrication of artificial channels with angström-scale precision. This ultimate confinement to the true molecular…
▽ More
The field of nanofluidics has shown considerable progress over the past decade thanks to key instrumental advances, leading to the discovery of a number of exotic transport phenomena for fluids and ions under extreme confinement. Recently, van der Waals assembly of 2D materials allowed fabrication of artificial channels with angström-scale precision. This ultimate confinement to the true molecular scale revealed unforeseen behaviour for both mass and ionic transport. In this work, we explore pressure-driven streaming in such molecular-size slits and report a new electro-hydrodynamic effect under coupled pressure and electric force. It takes the form of a transistor-like response of the pressure induced ionic streaming: an applied bias of a fraction of a volt results in an enhancement of the streaming mobility by up to 20 times. The gating effect is observed with both graphite and boron nitride channels but exhibits marked material-dependent features. Our observations are rationalized by a theoretical framework for the flow dynamics, including the frictional interaction of water, ions and the confining surfaces as a key ingredient. The material dependence of the voltage modulation can be traced back to a contrasting molecular friction on graphene and boron nitride. The highly nonlinear transport under molecular-scale confinement offers new routes to actively control molecular and ion transport and design elementary building blocks for artificial ionic machinery, such as ion pumps. Furthermore, it provides a versatile platform to explore electro-mechanical couplings potentially at play in recently discovered mechanosensitive ionic channels.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Simulated Refraction-Enhanced X-Ray Radiography of Laser-Driven Shocks
Authors:
Arnab Kar,
T. R. Boehly,
P. B. Radha,
D. H. Edgell,
S. X. Hu,
P. M. Nilson,
A. Shvydky,
W. Theobald,
D. Cao,
K. S. Anderson,
V. N. Goncharov,
S. P. Regan
Abstract:
Refraction-enhanced x-ray radiography (REXR) is used to infer shock-wave positions of more than one shock wave, launched by a multiple-picket pulse in a planar plastic foil. This includes locating shock waves before the shocks merge, during the early time and the main drive of the laser pulse that is not possible with the velocity interferometer system for any reflector. Simulations presented in t…
▽ More
Refraction-enhanced x-ray radiography (REXR) is used to infer shock-wave positions of more than one shock wave, launched by a multiple-picket pulse in a planar plastic foil. This includes locating shock waves before the shocks merge, during the early time and the main drive of the laser pulse that is not possible with the velocity interferometer system for any reflector. Simulations presented in this paper of REXR show that it is necessary to incorporate refraction and attenuation of x rays along with the appropriate opacity and refractive-index tables to interpret experimental images. Simulated REXR shows good agreement with an experiment done on the OMEGA laser facility to image a shock wave. REXR can be applied to design multiple-picket pulses with a better understanding of the shock locations. This will be beneficial to obtain the required adiabats for inertial confinement fusion implosions.
△ Less
Submitted 10 March, 2019;
originally announced March 2019.
-
Complete steric exclusion of ions and proton transport through confined monolayer water
Authors:
K. Gopinadhan,
S. Hu,
A. Esfandiar,
M. Lozada-Hidalgo,
F. C. Wang,
Q. Yang,
A. V. Tyurnina,
A. Keerthi,
B. Radha,
A. K. Geim
Abstract:
It has long been an aspirational goal to create artificial structures that allow fast permeation of water but reject even the smallest hydrated ions, replicating the feat achieved by nature in protein channels (e.g., aquaporins). Despite recent progress in creating nanoscale pores and capillaries, these structures still remain distinctly larger than protein channels. We report capillaries made by…
▽ More
It has long been an aspirational goal to create artificial structures that allow fast permeation of water but reject even the smallest hydrated ions, replicating the feat achieved by nature in protein channels (e.g., aquaporins). Despite recent progress in creating nanoscale pores and capillaries, these structures still remain distinctly larger than protein channels. We report capillaries made by effectively extracting one atomic plane from bulk crystals, which leaves a two-dimensional slit of a few angstroms in height. Water moves through these capillaries with little resistance, whereas no permeation could be detected even for such small ions as Na+ and Cl-. Only protons (H+) can diffuse through monolayer water inside the capillaries. These observations improve our understanding of molecular transport at the atomic scale.
△ Less
Submitted 21 December, 2018; v1 submitted 22 November, 2018;
originally announced November 2018.
-
Fast water flow through graphene nanocapillaries: a continuum model approach involving the microscopic structure of confined water
Authors:
M. Neek-Amal,
A. Lohrasebi,
M. Mousaei,
F. Shayeganfar,
B. Radha,
F. M. Peeters
Abstract:
Water inside a nanocapillary becomes ordered, resulting in unconventional behavior. A profound enhancement of water flow inside nanometer thin capillaries made of graphene has been observed [B. Radha et.al., Nature (London) 538, 222 (2016)]. Here we explain this enhancement as due to the large density and the extraordinary viscosity of water inside the graphene nanocapillaries. Using the Hagen-Poi…
▽ More
Water inside a nanocapillary becomes ordered, resulting in unconventional behavior. A profound enhancement of water flow inside nanometer thin capillaries made of graphene has been observed [B. Radha et.al., Nature (London) 538, 222 (2016)]. Here we explain this enhancement as due to the large density and the extraordinary viscosity of water inside the graphene nanocapillaries. Using the Hagen-Poiseuille theory with slippage-boundary condition and incorporating disjoining pressure term in combination with results from molecular dynamics (MD) simulations, we present an analytical theory that elucidates the origin of the enhancement of water flow inside hydrophobic nanocapillaries.
Our work reveals a distinctive dependence of water flow in a nanocapillary on the structural properties of nanoconfined water in agreement with experiment, which opens a new avenue in nanofluidics.
△ Less
Submitted 1 September, 2018; v1 submitted 20 August, 2018;
originally announced August 2018.
-
Anomalously low dielectric constant of confined water
Authors:
L. Fumagalli,
A. Esfandiar,
R. Fabregas,
S. Hu,
P. Ares,
A. Janardanan,
Q. Yang,
B. Radha,
T. Taniguchi,
K. Watanabe,
G. Gomila,
K. S. Novoselov,
A. K. Geim
Abstract:
The dielectric constant of interfacial water has been predicted to be smaller than that of bulk water (= 80) because the rotational freedom of water dipoles is expected to decrease near surfaces, yet experimental evidence is lacking. We report local capacitance measurements for water confined between two atomically-flat walls separated by various distances down to 1 nm. Our experiments reveal the…
▽ More
The dielectric constant of interfacial water has been predicted to be smaller than that of bulk water (= 80) because the rotational freedom of water dipoles is expected to decrease near surfaces, yet experimental evidence is lacking. We report local capacitance measurements for water confined between two atomically-flat walls separated by various distances down to 1 nm. Our experiments reveal the presence of an interfacial layer with vanishingly small polarization such that its out-of-plane dielectric constant is only approximately 2. The electrically dead layer is found to be two to three molecules thick. These results provide much needed feedback for theories describing water-mediated surface interactions and behavior of interfacial water, and show a way to investigate the dielectric properties of other fluids and solids under extreme confinement.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Ballistic molecular transport through two-dimensional channels
Authors:
A. Keerthi,
A. K. Geim,
A. Janardanan,
A. P. Rooney,
A. Esfandiar,
S. Hu,
S. A. Dar,
I. V. Grigorieva,
S. J. Haigh,
F. C. Wang,
B. Radha
Abstract:
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well i…
▽ More
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well in experiment, and only a few cases of partially specular (mirror-like) reflection are known. Here we report gas transport through angstrom-scale channels with atomically-flat walls and show that surface scattering can be both diffuse or specular, depending on fine details of the surface atomic landscape, and quantum effects contribute to the specularity at room temperature. The channels made from graphene or boron nitride allow a helium gas flow that is orders of magnitude faster than expected from the theory. This is explained by specular surface scattering, which leads to ballistic transport and frictionless gas flow. Similar channels but with molybdenum disulfide walls exhibit much slower permeation that remains well described by Knudsen diffusion. The difference is attributed to stronger atomic corrugations at MoS2 surfaces, which are similar in height to the size of transported atoms and their de Broglie wavelength. The importance of the latter, matter-wave contribution is corroborated by the observation of a reversed isotope effect in which the mass flow of hydrogen is notably higher than that of deuterium, in contrast to the relation expected for classical flows. Our results provide insights into atomistic details of molecular permeation, which so far could be accessed only in simulations, and show a possibility of studying gas transport under a controlled confinement comparable to the quantum-mechanical size of atoms.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Analysis of trends in experimental observables and reconstruction of the implosion dynamics for direct-drive cryogenic targets on OMEGA
Authors:
A. Bose,
R. Betti,
D. Mangino,
K. M. Woo,
D. Patel,
A. R. Christopherson,
V. Gopalaswamy,
O. M. Mannion,
S. P. Regan,
V. N. Goncharov,
D. H. Edgell,
C. J. Forrest,
J. A. Frenje,
M. Gatu Johnson,
V. Yu Glebov,
I. V. Igumenshchev,
J. P. Knauer,
F. J. Marshall,
P. B. Radha,
R. Shah,
C. Stoeckl,
W. Theobald,
T. C. Sangster,
D. Shvarts,
E. M. Campbell
Abstract:
This paper describes a technique for identifying trends in performance degradation for inertial confinement fusion implosion experiments. It is based on reconstruction of the implosion core with a combination of low- and mid-mode asymmetries. This technique was applied to an ensemble of hydro-equivalent deuterium-tritium implosions on OMEGA that achieved inferred hot-spot pressures ~56+/-7 Gbar [S…
▽ More
This paper describes a technique for identifying trends in performance degradation for inertial confinement fusion implosion experiments. It is based on reconstruction of the implosion core with a combination of low- and mid-mode asymmetries. This technique was applied to an ensemble of hydro-equivalent deuterium-tritium implosions on OMEGA that achieved inferred hot-spot pressures ~56+/-7 Gbar [S. Regan et al., Phys. Rev. Lett. 117, 025001 (2016)]. All the experimental observables pertaining to the core could be reconstructed simultaneously with the same combination of low and mid modes. This suggests that in addition to low modes, that can cause a degradation of the stagnation pressure, mid modes are present that reduce the size of the neuron and x-ray producing volume. The systematic analysis shows that asymmetries can cause an overestimation of the total areal density in these implosions. It is also found that an improvement in implosion symmetry resulting from correction of either the systematic mid or low modes would result in an increase of the hot-spot pressure from 56 Gbar to ~80 Gbar and could produce a burning plasma when the implosion core is extrapolated to an equivalent 1.9 MJ symmetric direct illumination [A. Bose et al., Phys. Rev. E 94, 011201(R) (2016)].
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Size effect in ion transport through angstrom-scale slits
Authors:
A. Esfandiar,
B. Radha,
F. C. Wang,
Q. Yang,
S. Hu,
S. Garaj,
R. R. Nair,
A. K. Geim,
K. Gopinadhan
Abstract:
It has been an ultimate but seemingly distant goal of nanofluidics to controllably fabricate capillaries with dimensions approaching the size of small ions and water molecules. We report ion transport through ultimately narrow slits that are fabricated by effectively removing a single atomic plane from a bulk crystal. The atomically flat angstrom-scale slits exhibit little surface charge, allowing…
▽ More
It has been an ultimate but seemingly distant goal of nanofluidics to controllably fabricate capillaries with dimensions approaching the size of small ions and water molecules. We report ion transport through ultimately narrow slits that are fabricated by effectively removing a single atomic plane from a bulk crystal. The atomically flat angstrom-scale slits exhibit little surface charge, allowing elucidation of the role of steric effects. We find that ions with hydrated diameters larger than the slit size can still permeate through, albeit with reduced mobility. The confinement also leads to a notable asymmetry between anions and cations of the same diameter. Our results provide a platform for studying effects of angstrom-scale confinement, which is important for development of nanofluidics, molecular separation and other nanoscale technologies.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Molecular transport through capillaries made with atomic-scale precision
Authors:
B. Radha,
A. Esfandiar,
F. C. Wang,
A. P. Rooney,
K. Gopinadhan,
A. Keerthi,
A. Mishchenko,
A. Janardanan,
P. Blake,
L. Fumagalli,
M. Lozada-Hidalgo,
S. Garaj,
S. J. Haigh,
I. V. Grigorieva,
H. A. Wu,
A. K. Geim
Abstract:
Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it…
▽ More
Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it challenging to produce capillaries with precisely controlled dimensions at this spatial scale. Here we report the fabrication of narrow and smooth capillaries through van der Waals assembly, with atomically flat sheets at the top and bottom separated by spacers made of two-dimensional crystals with a precisely controlled number of layers. We use graphene and its multilayers as archetypal two-dimensional materials to demonstrate this technology, which produces structures that can be viewed as if individual atomic planes had been removed from a bulk crystal to leave behind flat voids of a height chosen with atomic-scale precision. Water transport through the channels, ranging in height from one to several dozen atomic planes, is characterized by unexpectedly fast flow (up to 1 metre per second) that we attribute to high capillary pressures (about 1,000 bar) and large slip lengths. For channels that accommodate only a few layers of water, the flow exhibits a marked enhancement that we associate with an increased structural order in nanoconfined water. Our work opens up an avenue to making capillaries and cavities with sizes tunable to ångström precision, and with permeation properties further controlled through a wide choice of atomically flat materials available for channel walls.
△ Less
Submitted 8 September, 2016; v1 submitted 29 June, 2016;
originally announced June 2016.
-
Sieving hydrogen isotopes through two dimensional crystals
Authors:
M. Lozada-Hidalgo,
S. Hu,
O. Marshall,
A. Mishchenko,
A. N. Grigorenko,
R. A. W. Dryfe,
B. Radha,
I. V. Grigorieva,
A. K. Geim
Abstract:
One-atom-thick crystals are impermeable to atoms and molecules, but hydrogen ions (thermal protons) penetrate through them. We show that monolayers of graphene and boron nitride can be used to separate hydrogen ion isotopes. Employing electrical measurements and mass spectrometry, we find that deuterons permeate through these crystals much slower than protons, resulting in a separation factor of ~…
▽ More
One-atom-thick crystals are impermeable to atoms and molecules, but hydrogen ions (thermal protons) penetrate through them. We show that monolayers of graphene and boron nitride can be used to separate hydrogen ion isotopes. Employing electrical measurements and mass spectrometry, we find that deuterons permeate through these crystals much slower than protons, resulting in a separation factor of ~10 at room temperature. The isotope effect is attributed to a difference of about 60 meV between zero-point energies of incident protons and deuterons, which translates into the equivalent difference in the activation barriers posed by two dimensional crystals. In addition to providing insight into the proton transport mechanism, the demonstrated approach offers a competitive and scalable way for hydrogen isotope enrichment.
△ Less
Submitted 2 January, 2016; v1 submitted 20 November, 2015;
originally announced November 2015.
-
Electron capture on iron group nuclei
Authors:
D. J. Dean,
K. Langanke,
L. Chatterjee,
P. B. Radha,
M. R. Strayer
Abstract:
We present Gamow-Teller strength distributions from shell model Monte Carlo studies of fp-shell nuclei that may play an important role in the pre-collapse evolution of supernovae. We then use these strength distributions to calculate the electron-capture cross sections and rates in the zero-momentum transfer limit. We also discuss the thermal behavior of the cross sections. We find large differe…
▽ More
We present Gamow-Teller strength distributions from shell model Monte Carlo studies of fp-shell nuclei that may play an important role in the pre-collapse evolution of supernovae. We then use these strength distributions to calculate the electron-capture cross sections and rates in the zero-momentum transfer limit. We also discuss the thermal behavior of the cross sections. We find large differences in these cross sections and rates when compared to the naive single-particle estimates. These differences need to be taken into account for improved modeling of the early stages of type II supernova evolution.
△ Less
Submitted 8 January, 1998;
originally announced January 1998.
-
Gamow-Teller strength distributions in fp-shell nuclei
Authors:
P. B. Radha,
D. J. Dean,
S. E. Koonin,
K. Langanke,
P. Vogel
Abstract:
We use the shell model Monte Carlo method to calculate complete 0f1p-shell response functions for Gamow-Teller (GT) operators and obtain the corresponding strength distributions using a Maximum Entropy technique. The approach is validated against direct diagonalization for 48Ti. Calculated GT strength distributions agree well with data from (n,p) and (p,n) reactions for nuclei with A=48-64. We a…
▽ More
We use the shell model Monte Carlo method to calculate complete 0f1p-shell response functions for Gamow-Teller (GT) operators and obtain the corresponding strength distributions using a Maximum Entropy technique. The approach is validated against direct diagonalization for 48Ti. Calculated GT strength distributions agree well with data from (n,p) and (p,n) reactions for nuclei with A=48-64. We also calculate the temperature evolution of the GT+ distributions for representative nuclei and find that the GT+ distributions broaden and the centroids shift to lower energies with increasing temperature.
△ Less
Submitted 29 July, 1997;
originally announced July 1997.
-
Pairing correlations in N~Z pf-shell nuclei
Authors:
K. Langanke,
D. J. Dean,
S. E. Koonin,
P. B. Radha
Abstract:
We perform Shell Model Monte Carlo calculations to study pair correlations in the ground states of $N=Z$ nuclei with masses A=48-60. We find that $T=1$, $J^π=0^+$ proton-neutron correlations play an important, and even dominant role, in the ground states of odd-odd $N=Z$ nuclei, in agreement with experiment. By studying pairing in the ground states of $^{52-58}$Fe, we observe that the isovector…
▽ More
We perform Shell Model Monte Carlo calculations to study pair correlations in the ground states of $N=Z$ nuclei with masses A=48-60. We find that $T=1$, $J^π=0^+$ proton-neutron correlations play an important, and even dominant role, in the ground states of odd-odd $N=Z$ nuclei, in agreement with experiment. By studying pairing in the ground states of $^{52-58}$Fe, we observe that the isovector proton-neutron correlations decrease rapidly with increasing neutron excess. In contrast, both the proton, and trivially the neutron correlations increase as neutrons are added.
We also study the thermal properties and the temperature dependence of pair correlations for $^{50}$Mn and $^{52}$Fe as exemplars of odd-odd and even-even $N=Z$ nuclei. While for $^{52}$Fe results are similar to those obtained for other even-even nuclei in this mass range, the properties of $^{50}$Mn at low temperatures are strongly influenced by isovector neutron-proton pairing. In coexistence with these isovector pair correlations, our calculations also indicate an excess of isoscalar proton-neutron pairing over the mean-field values. The isovector neutron-proton correlations rapidly decrease with temperatures and vanish for temperatures above $T=700$ keV, while the isovector correlations among like nucleons persist to higher temperatures. Related to the quenching of the isovector proton-neutron correlations, the average isospin decreases from 1, appropriate for the ground state, to 0 as the temperature increases.
△ Less
Submitted 3 October, 1996;
originally announced October 1996.
-
Temperature Dependence of Pair Correlations in Nuclei in the Iron-Region
Authors:
K. Langanke,
D. J. Dean,
P. B. Radha,
S. E. Koonin
Abstract:
We use the shell model Monte Carlo approach to study thermal properties and pair correlations in $^{54,56,58}$Fe and in $^{56}$Cr. The calculations are performed with the modified Kuo-Brown interaction in the complete $1p0f$ model space. We find generally that the proton-proton and neutron-neutron $J=0$ pairing correlations, which dominate the ground state properties of even-even nuclei, vanish…
▽ More
We use the shell model Monte Carlo approach to study thermal properties and pair correlations in $^{54,56,58}$Fe and in $^{56}$Cr. The calculations are performed with the modified Kuo-Brown interaction in the complete $1p0f$ model space. We find generally that the proton-proton and neutron-neutron $J=0$ pairing correlations, which dominate the ground state properties of even-even nuclei, vanish at temperatures around 1 MeV. This pairing phase transition is accompanied by a rapid increase in the moment of inertia and a partial unquenching of the M1 strength. We find that the M1 strength totally unquenches at higher temperatures, related to the vanishing of isoscalar proton-neutron correlations, which persist to higher temperatures than the pairing between like nucleons. The Gamow-Teller strength is also correlated to the isoscalar proton-neutron pairing and hence also unquenches at a temperature larger than that of the pairing phase transition.
△ Less
Submitted 30 January, 1996;
originally announced January 1996.
-
SMMC method for two-neutrino double beta decay
Authors:
P. B. Radha,
D. J. Dean,
S. E. Koonin,
T. T. S. Kuo,
K. Langanke,
A. Poves,
J. Retamosa,
P. Vogel
Abstract:
Shell Model Monte Carlo (SMMC) techniques are used to calculate two-neutrino double beta decay matrix elements. We validate the approach against direct diagonalization for $^{48}$Ca in the complete $pf$-shell using the KB3 interaction. The method is then applied to the decay of $^{76}$Ge in the $(0f_{5/2},1p,0g_{9/2})$ model space using a newly calculated realistic interaction. Our result for th…
▽ More
Shell Model Monte Carlo (SMMC) techniques are used to calculate two-neutrino double beta decay matrix elements. We validate the approach against direct diagonalization for $^{48}$Ca in the complete $pf$-shell using the KB3 interaction. The method is then applied to the decay of $^{76}$Ge in the $(0f_{5/2},1p,0g_{9/2})$ model space using a newly calculated realistic interaction. Our result for the matrix element is $0.13\pm0.05$ MeV$^{-1}$, in agreement with the experimental value.
△ Less
Submitted 25 October, 1995;
originally announced October 1995.
-
Shell-model Monte Carlo studies of fp-shell nuclei
Authors:
K. Langanke,
D. J. Dean,
P. B. Radha,
Y. Alhassid,
S. E. Koonin
Abstract:
We study the gross properties of even-even and $N=Z$ nuclei with $A=48-64$ using shell-model Monte Carlo methods. Our calculations account for all $0 \hbar ω$ configurations in the $fp$-shell and employ the modified Kuo-Brown interaction KB3. We find good agreement with data for masses and total $B(E2)$ strengths, the latter employing effective charges $e_p=1.35e$ and $e_n=0.35e$. The calculated…
▽ More
We study the gross properties of even-even and $N=Z$ nuclei with $A=48-64$ using shell-model Monte Carlo methods. Our calculations account for all $0 \hbar ω$ configurations in the $fp$-shell and employ the modified Kuo-Brown interaction KB3. We find good agreement with data for masses and total $B(E2)$ strengths, the latter employing effective charges $e_p=1.35e$ and $e_n=0.35e$. The calculated total Gamow-Teller strengths agree consistently with the $B(GT_+)$-values deduced from $(n,p)$ data if the shell model results are renormalized by $0.64$, as has already been established for $sd$-shell nuclei. The present calculations therefore suggest that this renormalization (i.e., $g_A=1$ in the nuclear medium) is universal.
△ Less
Submitted 19 April, 1995;
originally announced April 1995.
-
Temperature dependence of the nuclear symmetry energy
Authors:
D. J. Dean,
S. E. Koonin,
K. Langanke,
P. B. Radha
Abstract:
We have studied the properties of A=54 and A=64 isobars at temperatures T \leq 2 MeV via Monte Carlo shell model calculations with two different residual interactions. In accord with empirical indications, we find that the symmetry energy coefficient, b_{sym}, is independent of temperature to within 0.6 MeV for T \leq 1 MeV. This is in contrast to a recent suggestion of a 2.5 MeV increase of b_{…
▽ More
We have studied the properties of A=54 and A=64 isobars at temperatures T \leq 2 MeV via Monte Carlo shell model calculations with two different residual interactions. In accord with empirical indications, we find that the symmetry energy coefficient, b_{sym}, is independent of temperature to within 0.6 MeV for T \leq 1 MeV. This is in contrast to a recent suggestion of a 2.5 MeV increase of b_{sym} for this temperature, which would have significantly altered the supernova explosion scenario.
△ Less
Submitted 26 August, 1994; v1 submitted 25 August, 1994;
originally announced August 1994.
-
Thermal properties of Fe-54
Authors:
D. J. Dean,
S. E. Koonin,
K. Langanke,
P. B. Radha,
Y. Alhassid
Abstract:
We study the thermal properties of Fe-54 with the Brown-Richter interaction in the complete 1p0f model space. Monte Carlo calculations show a peak in the heat capacity and rapid increases in both the moment of inertia and M1 strength near a temperature of 1.1 MeV that are associated with the vanishing of proton-proton and neutron-neutron monopole pair correlations; neutron-proton correlations pe…
▽ More
We study the thermal properties of Fe-54 with the Brown-Richter interaction in the complete 1p0f model space. Monte Carlo calculations show a peak in the heat capacity and rapid increases in both the moment of inertia and M1 strength near a temperature of 1.1 MeV that are associated with the vanishing of proton-proton and neutron-neutron monopole pair correlations; neutron-proton correlations persist to higher temperatures. Our results are consistent with a Fermi gas level density whose back-shift vanishes with increasing temperature.
△ Less
Submitted 4 January, 1995; v1 submitted 4 May, 1994;
originally announced May 1994.
-
Complete 0 hbar omega calculations of Gamow-Teller strengths for nuclei in the iron region
Authors:
D. J. Dean,
P. B. Radha,
K. Langanke,
Y. Alhassid,
S. E. Koonin,
W. E. Ormand
Abstract:
Gamow-Teller strengths for selected nuclei in the iron region (A~56) have been investigated via shell-model Monte Carlo calculations with realistic interactions in the complete fp basis. Results for all cases show significant quenching relative to single-particle estimates, in quantitative agreement with (n,p) data. The J=1,T=0 residual interaction and the f_{7/2}-f_{5/2} spin-orbit splitting ar…
▽ More
Gamow-Teller strengths for selected nuclei in the iron region (A~56) have been investigated via shell-model Monte Carlo calculations with realistic interactions in the complete fp basis. Results for all cases show significant quenching relative to single-particle estimates, in quantitative agreement with (n,p) data. The J=1,T=0 residual interaction and the f_{7/2}-f_{5/2} spin-orbit splitting are shown to play major roles in the quenching mechanism. Calculated B(E2, 2^+_1 -> 0^+_1) values are in fair agreement with experiment using effective charges of e_p=1.1e and e_n=0.1e.
△ Less
Submitted 2 February, 1994;
originally announced February 1994.
-
Shell model Monte Carlo calculations for Dy-170
Authors:
D. J. Dean,
S. E. Koonin,
G. H. Lang,
P. B. Radha,
W. E. Ormand
Abstract:
We present the first auxiliary field Monte Carlo calculations for a rare earth nucleus, Dy-170. A pairing plus quadrupole Hamiltonian is used to demonstrate the physical properties that can be studied in this region. We calculate various static observables for both uncranked and cranked systems and show how the shape distribution evolves with temperature. We also introduce a discretization of th…
▽ More
We present the first auxiliary field Monte Carlo calculations for a rare earth nucleus, Dy-170. A pairing plus quadrupole Hamiltonian is used to demonstrate the physical properties that can be studied in this region. We calculate various static observables for both uncranked and cranked systems and show how the shape distribution evolves with temperature. We also introduce a discretization of the path integral that allows a more efficient Monte Carlo sampling.
△ Less
Submitted 28 September, 1993;
originally announced September 1993.
