-
Grain Boundary Grooving in a Bicrystal with Passivation Coating
Authors:
H. Kalantarova,
L. Klinger,
E. Rabkin
Abstract:
We use the sixth order linear parabolic equation \begin{equation} \frac{\partial y}{\partial t}=B\left(α\frac{\partial^{6}y}{\partial x^{6}}-\frac{\partial^{4}y}{\partial x^{4}}\right),\ x\in \mathbb{R}_{+},\ t>0,\nonumber \end{equation} proposed by Rabkin and describing the evolution of a solid surface covered with a thin, inert and fully elastic passivation layer, to analyze the grain boundary g…
▽ More
We use the sixth order linear parabolic equation \begin{equation} \frac{\partial y}{\partial t}=B\left(α\frac{\partial^{6}y}{\partial x^{6}}-\frac{\partial^{4}y}{\partial x^{4}}\right),\ x\in \mathbb{R}_{+},\ t>0,\nonumber \end{equation} proposed by Rabkin and describing the evolution of a solid surface covered with a thin, inert and fully elastic passivation layer, to analyze the grain boundary groove formation on initially flat surface. We derive the corresponding boundary conditions and construct an asymptotic representation of the solution to this initial boundary value problem when $α$ is small, by applying the theory of singular perturbation. We illustrate the effect of passivation film near and far from a grain boundary groove.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
A convolutional neural network for defect classification in Bragg coherent X-ray diffraction
Authors:
Bruce Lim,
Ewen Bellec,
Maxime Dupraz,
Steven Leake,
Andrea Resta,
Alessandro Coati,
Michael Sprung,
Ehud Almog,
Eugen Rabkin,
Tobias Schülli,
Marie-Ingrid Richard
Abstract:
Coherent diffraction imaging enables the imaging of individual defects, such as dislocations or stacking faults, in materials.These defects and their surrounding elastic strain fields have a critical influence on the macroscopic properties and functionality of materials. However, their identification in Bragg coherent diffraction imaging remains a challenge and requires significant data mining. Th…
▽ More
Coherent diffraction imaging enables the imaging of individual defects, such as dislocations or stacking faults, in materials.These defects and their surrounding elastic strain fields have a critical influence on the macroscopic properties and functionality of materials. However, their identification in Bragg coherent diffraction imaging remains a challenge and requires significant data mining. The ability to identify defects from the diffraction pattern alone would be a significant advantage when targeting specific defect types and accelerates experiment design and execution. Here, we exploit a computational tool based on a three-dimensional (3D) parametric atomistic model and a convolutional neural network to predict dislocations in a crystal from its 3D coherent diffraction pattern. Simulated diffraction patterns from several thousands of relaxed atomistic configurations of nanocrystals are used to train the neural network and to predict the presence or absence of dislocations as well as their type(screw or edge). Our study paves the way for defect recognition in 3D coherent diffraction patterns for material science
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Plastic forming of metals at the nanoscale: interdiffusion-induced bending of bimetallic nanowhiskers
Authors:
Yuanshen Qi,
Gunther Richter,
Eylul Suadiye,
Michael Kalina,
Eugen Rabkin
Abstract:
Controlled plastic forming of nanoscale metallic objects by applying mechanical load is a challenge, since defect-free nanocrystals usually yield at near theoretical shear strength, followed by an uncontrolled catastrophic failure. Herein, instead of mechanical load, we utilize chemical stress from imbalanced interdiffusion to manipulate the shape of nanowhiskers. Bimetallic Au-Fe nanowhiskers wit…
▽ More
Controlled plastic forming of nanoscale metallic objects by applying mechanical load is a challenge, since defect-free nanocrystals usually yield at near theoretical shear strength, followed by an uncontrolled catastrophic failure. Herein, instead of mechanical load, we utilize chemical stress from imbalanced interdiffusion to manipulate the shape of nanowhiskers. Bimetallic Au-Fe nanowhiskers with an ultra-high bending strength were synthesized employing the molecular beam epitaxy technique. The one-sided Fe coating on the defect-free, single-crystalline Au nanowhisker exhibited both single- and poly-crystalline regions. Annealing the bimetallic nanowhiskers at elevated temperatures led to gradual change of curvature and irreversible bending, which is attributed to the grain boundary Kirkendall effect during the diffusion of Au along the grain boundaries in the Fe layer. The results of this study demonstrate a high potential of chemical interdiffusion in the controlled plastic forming of ultra-strong metal nanostructures.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Anomalous Diffusion along Metal/Ceramic Interfaces
Authors:
Aakash Kumar,
Hagit Barda,
Leonid Klinger,
Michael W. Finnis,
Vincenzo Lordi,
Eugen Rabkin,
David J. Srolovitz
Abstract:
Hole formation in a polycrystalline Ni film on an $α$-Al$_2$O$_3$ substrate coupled with a continuum diffusion analysis demonstrates that Ni diffusion along the Ni/$α$-Al$_2$O$_3$ interface is surprisingly fast. Ab initio calculations demonstrate that both Ni vacancy formation and migration energies at the coherent Ni/$α$-Al$_2$O$_3$ interface are much smaller than in bulk Ni, suggesting that the…
▽ More
Hole formation in a polycrystalline Ni film on an $α$-Al$_2$O$_3$ substrate coupled with a continuum diffusion analysis demonstrates that Ni diffusion along the Ni/$α$-Al$_2$O$_3$ interface is surprisingly fast. Ab initio calculations demonstrate that both Ni vacancy formation and migration energies at the coherent Ni/$α$-Al$_2$O$_3$ interface are much smaller than in bulk Ni, suggesting that the activation energy for diffusion along coherent Ni/$α$-Al$_2$O$_3$ interfaces is comparable to that along (incoherent/high angle) grain boundaries. Based on these results, we develop a simple model for diffusion along metal/ceramic interfaces, apply to a wide range of metal/ceramic systems and validate it with several ab initio calculations. These results suggest that fast metal diffusion along metal/ceramic interfaces should be common, but is not universal.
△ Less
Submitted 12 July, 2018;
originally announced July 2018.
-
Fabrication of Hollow AlAu2 Nanoparticles by Solid State Dewetting and Oxidation of Al on Sapphire Substrate
Authors:
Nimrod Gazit,
Gunther Richter,
Amit Sharma,
Leonid Klinger,
Eugen Rabkin
Abstract:
The Al-Au binary diffusion couple is a classic example of the system exhibiting Kirkendall voiding during interdiffusion. We demonstrate that this effect, which is a major reason for failures of the wire bonds in microelectronics, can be utilized for producing hollow AlAu2 nanoparticles attached to sapphire substrate. To this end, we produced the core-shell Al-Au nanoparticles by performing a soli…
▽ More
The Al-Au binary diffusion couple is a classic example of the system exhibiting Kirkendall voiding during interdiffusion. We demonstrate that this effect, which is a major reason for failures of the wire bonds in microelectronics, can be utilized for producing hollow AlAu2 nanoparticles attached to sapphire substrate. To this end, we produced the core-shell Al-Au nanoparticles by performing a solid state dewetting treatment of Al thin film deposited on sapphire substrate, followed by the deposition of thin Au layer on the top of dewetted sample. Annealing of the core-shell nanoparticles in air resulted in outdiffusion of Al from the particles, formation of pores, and growth of the AlAu2 intermetallic phase in the particles. We demonstrated that the driving force for hollowing is the oxidation reaction of the Al atoms at the Au-sapphire interface, leading to the homoepitaxial growth of newly formed alumina at the interface. We developed a kinetic model of hollowing controlled by diffusion of oxygen through the Au thin film, and estimated the solubility of oxygen in solid Au. Our work demonstrates that the core-shell nanoparticles attached to the substrate can be hollowed by the Kirkendall effect in the thin film spatially separated from the particles.
△ Less
Submitted 9 July, 2018; v1 submitted 6 July, 2018;
originally announced July 2018.
-
Effect of recrystallization on diffusion in ultrafine grained Ni
Authors:
Daria Prokoshkina,
Leonid Klinger,
Anna Moros,
Gerhard Wilde,
Eugen Rabkin,
Sergiy V. Divinski
Abstract:
We studied the effect of recrystallization and grain growth on grain boundary self-diffusion in ultrafine grained Ni prepared by high pressure torsion. Two Ni materials of low (99.6 wt. %) and high (99.99 wt. %) purity levels were compared and the kinetic properties of stationary and mobile grain boundaries were examined in detail. Unusual concentration profiles with characteristic 'kinks' were me…
▽ More
We studied the effect of recrystallization and grain growth on grain boundary self-diffusion in ultrafine grained Ni prepared by high pressure torsion. Two Ni materials of low (99.6 wt. %) and high (99.99 wt. %) purity levels were compared and the kinetic properties of stationary and mobile grain boundaries were examined in detail. Unusual concentration profiles with characteristic 'kinks' were measured for Ni self-diffusion in 99.99 wt. % pure Ni, which is undergoing recrystallization and grain growth during diffusion annealing treatment. This behavior is found to be related to specific kinetic properties of grain boundaries which encompass the recrystallized areas and consume numerous defects of the ultrafine grained matrix during their motion. We proposed a model of self-diffusion in recrystallizing material which takes into account a hierarchy of stationary and moving fast diffusion paths, and satisfactory explains the observed diffusion behavior.
△ Less
Submitted 11 December, 2013;
originally announced December 2013.
-
Ultrafast atomic transport in recrystallizing ultrafine grained Ni
Authors:
Daria Prokoshkina,
Leonid Klinger,
Anna Moros,
Gerhard Wilde,
Eugen Rabkin,
Sergiy V. Divinski
Abstract:
We studied tracer self-diffusion in ultrafine grained Ni prepared by high pressure torsion. Two Ni materials of low (99.6 wt. %) and high (99.99 wt. %) purity levels were investigated. While the ultrafine grained structure of less pure Ni remained stable during diffusion annealing, recrystallization and subsequent grain growth occurred in high purity Ni at the same annealing conditions. Neverthele…
▽ More
We studied tracer self-diffusion in ultrafine grained Ni prepared by high pressure torsion. Two Ni materials of low (99.6 wt. %) and high (99.99 wt. %) purity levels were investigated. While the ultrafine grained structure of less pure Ni remained stable during diffusion annealing, recrystallization and subsequent grain growth occurred in high purity Ni at the same annealing conditions. Nevertheless, qualitatively similar ultrafast diffusion rates were measured in the samples of both purity levels. In high purity Ni, the kinetics of recrystallization was found to deviate strongly from the predictions of the Johnson-Mehl-Avrami-Kolmogorov theory. Moreover, the ultrafast diffusion paths withstood the recrystallization process. A model which accounts for solute redistribution in front of the moving boundary is suggested. Retaining of deformation-induced ultrafast diffusion paths in recrystallized Ni is explained by a specific mechanism of enhanced stability of the residual ultrafine grained fraction against recrystallization.
△ Less
Submitted 11 December, 2013;
originally announced December 2013.
