-
Active flow control for drag reduction through multi-agent reinforcement learning on a turbulent cylinder at $Re_D=3900$
Authors:
P. Suárez,
F. Álcantara-Ávila,
A. Miró,
J. Rabault,
B. Font,
O. Lehmkuhl,
R. Vinuesa
Abstract:
This study presents novel active-flow-control (AFC) strategies aimed at achieving drag reduction for a three-dimensional cylinder immersed in a flow at a Reynolds number based on freestream velocity and cylinder diameter of (Re_D=3900). The cylinder in this subcritical flow regime has been extensively studied in the literature and is considered a classic case of turbulent flow arising from a bluff…
▽ More
This study presents novel active-flow-control (AFC) strategies aimed at achieving drag reduction for a three-dimensional cylinder immersed in a flow at a Reynolds number based on freestream velocity and cylinder diameter of (Re_D=3900). The cylinder in this subcritical flow regime has been extensively studied in the literature and is considered a classic case of turbulent flow arising from a bluff body. The strategies presented are explored through the use of deep reinforcement learning. The cylinder is equipped with 10 independent zero-net-mass-flux jet pairs, distributed on the top and bottom surfaces, which define the AFC setup. The method is based on the coupling between a computational-fluid-dynamics solver and a multi-agent reinforcement-learning (MARL) framework using the proximal-policy-optimization algorithm. Thanks to the acceleration in training facilitated by exploiting the local invariants with MARL, a drag reduction of (8\%) was achieved, with a mass cost efficiency two orders of magnitude lower than those of the existing classical controls in the literature. This development represents a significant advancement in active flow control, particularly in turbulent regimes critical to industrial applications.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Flow control of three-dimensional cylinders transitioning to turbulence via multi-agent reinforcement learning
Authors:
P. Suárez,
F. Álcantara-Ávila,
J. Rabault,
A. Miró,
B. Font,
O. Lehmkuhl,
R. Vinuesa
Abstract:
Designing active-flow-control (AFC) strategies for three-dimensional (3D) bluff bodies is a challenging task with critical industrial implications. In this study we explore the potential of discovering novel control strategies for drag reduction using deep reinforcement learning. We introduce a high-dimensional AFC setup on a 3D cylinder, considering Reynolds numbers ($Re_D$) from $100$ to $400$,…
▽ More
Designing active-flow-control (AFC) strategies for three-dimensional (3D) bluff bodies is a challenging task with critical industrial implications. In this study we explore the potential of discovering novel control strategies for drag reduction using deep reinforcement learning. We introduce a high-dimensional AFC setup on a 3D cylinder, considering Reynolds numbers ($Re_D$) from $100$ to $400$, which is a range including the transition to 3D wake instabilities. The setup involves multiple zero-net-mass-flux jets positioned on the top and bottom surfaces, aligned into two slots. The method relies on coupling the computational-fluid-dynamics solver with a multi-agent reinforcement-learning (MARL) framework based on the proximal-policy-optimization algorithm. MARL offers several advantages: it exploits local invariance, adaptable control across geometries, facilitates transfer learning and cross-application of agents, and results in a significant training speedup. For instance, our results demonstrate $21\%$ drag reduction for $Re_D=300$, outperforming classical periodic control, which yields up to $6\%$ reduction. To the authors' knowledge, the present MARL-based framework represents the first time where training is conducted in 3D cylinders. This breakthrough paves the way for conducting AFC on progressively more complex turbulent-flow configurations.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Opportunities for machine learning in scientific discovery
Authors:
Ricardo Vinuesa,
Jean Rabault,
Hossein Azizpour,
Stefan Bauer,
Bingni W. Brunton,
Arne Elofsson,
Elias Jarlebring,
Hedvig Kjellstrom,
Stefano Markidis,
David Marlevi,
Paola Cinnella,
Steven L. Brunton
Abstract:
Technological advancements have substantially increased computational power and data availability, enabling the application of powerful machine-learning (ML) techniques across various fields. However, our ability to leverage ML methods for scientific discovery, {\it i.e.} to obtain fundamental and formalized knowledge about natural processes, is still in its infancy. In this review, we explore how…
▽ More
Technological advancements have substantially increased computational power and data availability, enabling the application of powerful machine-learning (ML) techniques across various fields. However, our ability to leverage ML methods for scientific discovery, {\it i.e.} to obtain fundamental and formalized knowledge about natural processes, is still in its infancy. In this review, we explore how the scientific community can increasingly leverage ML techniques to achieve scientific discoveries. We observe that the applicability and opportunity of ML depends strongly on the nature of the problem domain, and whether we have full ({\it e.g.}, turbulence), partial ({\it e.g.}, computational biochemistry), or no ({\it e.g.}, neuroscience) {\it a-priori} knowledge about the governing equations and physical properties of the system. Although challenges remain, principled use of ML is opening up new avenues for fundamental scientific discoveries. Throughout these diverse fields, there is a theme that ML is enabling researchers to embrace complexity in observational data that was previously intractable to classic analysis and numerical investigations.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Solving Partial Differential Equations with Equivariant Extreme Learning Machines
Authors:
Hans Harder,
Jean Rabault,
Ricardo Vinuesa,
Mikael Mortensen,
Sebastian Peitz
Abstract:
We utilize extreme-learning machines for the prediction of partial differential equations (PDEs). Our method splits the state space into multiple windows that are predicted individually using a single model. Despite requiring only few data points (in some cases, our method can learn from a single full-state snapshot), it still achieves high accuracy and can predict the flow of PDEs over long time…
▽ More
We utilize extreme-learning machines for the prediction of partial differential equations (PDEs). Our method splits the state space into multiple windows that are predicted individually using a single model. Despite requiring only few data points (in some cases, our method can learn from a single full-state snapshot), it still achieves high accuracy and can predict the flow of PDEs over long time horizons. Moreover, we show how additional symmetries can be exploited to increase sample efficiency and to enforce equivariance.
△ Less
Submitted 24 May, 2024; v1 submitted 29 April, 2024;
originally announced April 2024.
-
Direct in-situ observations of wave-induced floe collisions in the deeper Marginal Ice Zone
Authors:
Lars Willas Dreyer,
Jean Rabault,
Atle Jensen,
Ingrid Dæhlen,
Øyvind Breivik,
Gaute Hope,
Yngve Kristoffersen
Abstract:
Ocean waves propagating through the Marginal Ice Zone (MIZ) and the pack ice are strongly attenuated. This attenuation is critical for protecting sea ice from energetic wave events that could otherwise lead to sea ice break-up and dislocation over large areas. Despite the importance of waves-in-ice attenuation, the exact physical mechanisms involved, and their relative importance, are still uncert…
▽ More
Ocean waves propagating through the Marginal Ice Zone (MIZ) and the pack ice are strongly attenuated. This attenuation is critical for protecting sea ice from energetic wave events that could otherwise lead to sea ice break-up and dislocation over large areas. Despite the importance of waves-in-ice attenuation, the exact physical mechanisms involved, and their relative importance, are still uncertain. Here we present for the first time direct in situ measurements of floe-floe interactions under the influence of waves, including collisions between adjacent floes. The collision events we report are aligned with the incoming wave direction, and phase-locked to the wave signal, which indicates that the individual collisions we detect are wave-induced. The observations demonstrate that wave attenuation by wave-induced floe-floe collisions, which have been studied in idealized laboratory and field experiments in the outer MIZ, are indeed a likely source of wave energy dissipation deep inside the MIZ as well.
△ Less
Submitted 8 April, 2024; v1 submitted 3 April, 2024;
originally announced April 2024.
-
Active flow control of a turbulent separation bubble through deep reinforcement learning
Authors:
Bernat Font,
Francisco Alcántara-Ávila,
Jean Rabault,
Ricardo Vinuesa,
Oriol Lehmkuhl
Abstract:
The control efficacy of classical periodic forcing and deep reinforcement learning (DRL) is assessed for a turbulent separation bubble (TSB) at $Re_τ=180$ on the upstream region before separation occurs. The TSB can resemble a separation phenomenon naturally arising in wings, and a successful reduction of the TSB can have practical implications in the reduction of the aviation carbon footprint. We…
▽ More
The control efficacy of classical periodic forcing and deep reinforcement learning (DRL) is assessed for a turbulent separation bubble (TSB) at $Re_τ=180$ on the upstream region before separation occurs. The TSB can resemble a separation phenomenon naturally arising in wings, and a successful reduction of the TSB can have practical implications in the reduction of the aviation carbon footprint. We find that the classical zero-net-mas-flux (ZNMF) periodic control is able to reduce the TSB by 15.7%. On the other hand, the DRL-based control achieves 25.3% reduction and provides a smoother control strategy while also being ZNMF. To the best of our knowledge, the current test case is the highest Reynolds-number flow that has been successfully controlled using DRL to this date. In future work, these results will be scaled to well-resolved large-eddy simulation grids. Furthermore, we provide details of our open-source CFD-DRL framework suited for the next generation of exascale computing machines.
△ Less
Submitted 3 April, 2024; v1 submitted 29 March, 2024;
originally announced March 2024.
-
In-situ observations of strong waves in ice amplitude modulation with a 12-hour period: a likely signature of complex physics governing waves in ice attenuation?
Authors:
J. Rabault,
T. Halsne,
A. Carrasco,
A. Korosov,
J. Voermans,
P. Bohlinger,
J. B. Debernard,
M. Müller,
Ø. Breivik,
T. Nose,
G. Hope,
F. Collard,
S. Herlédan,
T. Kodaira,
N. Hughes,
Q. Zhang,
K. H. Christensen,
A. Babanin,
L. W. Dreyer,
C. Palerme,
L. Aouf,
K. Christakos,
A. Jensen,
J. Röhrs,
A. Marchenko
, et al. (3 additional authors not shown)
Abstract:
The Marginal Ice Zone (MIZ) forms a critical transition region between the ocean and sea ice cover as it protects the close ice further in from the effect of the steepest and most energetic open ocean waves. As waves propagate through the MIZ, they get exponentially attenuated. Unfortunately, the associated attenuation coefficient is difficult to accurately estimate and model, and there are still…
▽ More
The Marginal Ice Zone (MIZ) forms a critical transition region between the ocean and sea ice cover as it protects the close ice further in from the effect of the steepest and most energetic open ocean waves. As waves propagate through the MIZ, they get exponentially attenuated. Unfortunately, the associated attenuation coefficient is difficult to accurately estimate and model, and there are still large uncertainties around which attenuation mechanisms dominate depending on the conditions. This makes it challenging to predict waves in ice attenuation, as well as the effective impact of open ocean waves propagating into the MIZ on sea ice breakup and dynamics. Here, we report in-situ observations of strongly modulated waves-in-ice amplitude, with a modulation period of around 12 hours. We show that simple explanations, such as changes in the incoming open water waves, or the effect of tides and currents and bathymetry, cannot explain for the observed modulation. Therefore, the significant wave height modulation observed in the ice most likely comes from a modulation of the waves-in-ice attenuation coefficient. To explain this, we conjecture that one or several waves-in-ice attenuation mechanisms are periodically modulated and switched on and off in the area of interest. We gather evidence that sea ice convergence and divergence may be the factor driving this change in the waves in ice attenuation mechanisms and attenuation coefficient, for example by modulating the intensity of floe-floe interaction mechanisms. Since this conclusion is obtained, at least partially, by elimination, we acknowledge that additional measurements will be needed to provide a positive proof of our conjecture.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
SFY -- A lightweight, high-frequency and phase-resolving wave-buoy for coastal waters
Authors:
Gaute Hope,
Torunn Irene Seldal,
Jean Rabault,
Helge Thomas Bryhni,
Patrik Bohlinger,
Jan-Victor Björkqvist,
Tor Nordam,
Atle Kleven,
Arsalan Mostaani,
Birgitte Rugaard Furevik,
Lars Robert Hole,
Roger Storvik,
Øyvind Breivik
Abstract:
Small lightweight wave buoys, SFYs, designed to operate near the coast, have been developed. The buoys are designed to record and transmit the full time series of surface acceleration at $52$ Hz. The buoy uses the cellular network to transfer data and position (up to $80$ km from the base station). This reduces costs and increases band-width. The low cost and low weight permits the buoys to be dep…
▽ More
Small lightweight wave buoys, SFYs, designed to operate near the coast, have been developed. The buoys are designed to record and transmit the full time series of surface acceleration at $52$ Hz. The buoy uses the cellular network to transfer data and position (up to $80$ km from the base station). This reduces costs and increases band-width. The low cost and low weight permits the buoys to be deployed easily, and in arrays in areas where satellite and wave models struggle to resolve wave and current interaction. The buoys are tested in a wave-flume, the open water and in the breaking waves of the surf. The conditions range from calm to significant wave heights exceeding $7$ m and crashing breakers with accelerations exceeding $10$ g. The high sample rate captures the impulse of breaking waves, and allows them to be studied in detail. Breaking waves are measured and quantified in the open water. We measure breaking waves in the surf and recover the trajectory of waves breaking in the field to a higher degree than previously done. The time series of surface elevation, and accurate positioning, permits the signal of adjacent buoys to be correlated in a coherent phase-resolved way. Finally, we offer an explanation and solution for the ubiquitous low-frequency noise in IMU-based buoys and discuss necessary sampling and design to measure in areas of breaking waves.
△ Less
Submitted 21 June, 2024; v1 submitted 4 January, 2024;
originally announced January 2024.
-
NORA-Surge: A storm surge hindcast for the Norwegian Sea, the North Sea and the Barents Sea
Authors:
Nils Melsom Kristensen,
Paulina Tedesco,
Jean Rabault,
Ole Johan Aarnes,
Øyvind Saetra,
Øyvind Breivik
Abstract:
Knowledge about statistics for water level variations along the coast due to storm surge is important for the utilization of the coastal zone. An open and freely available storm surge hindcast archive covering the coast of Norway and adjacent sea areas spanning the time period 1979-2022 is presented. The storm surge model is forced by wind stress and mean sea level pressure taken from the non-hydr…
▽ More
Knowledge about statistics for water level variations along the coast due to storm surge is important for the utilization of the coastal zone. An open and freely available storm surge hindcast archive covering the coast of Norway and adjacent sea areas spanning the time period 1979-2022 is presented. The storm surge model is forced by wind stress and mean sea level pressure taken from the non-hydrostatic NORA3 atmospheric hindcast. A dataset consisting of observations of water level from more than 90 water level gauges along the coasts of the North Sea and the Norwegian Sea is compiled and quality controlled, and used to assess the performance of the hindcast. The observational dataset is distributed in both time and space, and when considering all the available quality controlled data, the comparison with modelled water levels yield a mean absolute error (MAE) of 9.7 cm and a root mean square error (RMSE) of 12.4 cm. Values for MAE and RMSE scaled by the standard deviation of the observed storm surge for each station are 0.42 and 0.54 standard deviations, repsectively. When considering the geographical differences in characteristics of storm surge for different countries/regions, the values of MAE and RMSE are in the range 5.7-13.9 cm and 7.6-17.8 cm respectively, and 0.33-0.46 and 0.42-0.59 standard deviations for the scaled values. The minimum and maximum values for water level in the hindcast are -2.60 m and 3.92 m. In addition, 100-year return level estimates are calculated from the hindcast, with minimum and maximum values of, respectively, -2.75 m and 3.98 m. All minimum and maximum values are found in the southern North Sea area.
△ Less
Submitted 7 June, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
Observations of transient wave-induced mean drift profiles caused by virtual wave stresses in a two-layer system
Authors:
Jan Erik H. Weber,
Yiyi Whitchelo,
Jon A. Pirolt,
Kai H. Christensen,
Jean Rabault,
Atle Jensen
Abstract:
An experimental study of long interfacial gravity waves was conducted in a closed wave tank containing two layers of viscous immiscible fluids. The study focuses on the development in time of the mean particle drift that occurs close to the interface where the two fluids meet. From a theoretical analysis by Weber & Christensen (Eur. J. Mech.-B/Fluids, vol. 77, 2019, pp. 162-170) it is predicted th…
▽ More
An experimental study of long interfacial gravity waves was conducted in a closed wave tank containing two layers of viscous immiscible fluids. The study focuses on the development in time of the mean particle drift that occurs close to the interface where the two fluids meet. From a theoretical analysis by Weber & Christensen (Eur. J. Mech.-B/Fluids, vol. 77, 2019, pp. 162-170) it is predicted that the growing drift in this region is associated with the action of the virtual wave stress. This effect has not been explored experimentally before. Interfacial waves of different amplitudes and frequencies were produced by a D-shaped paddle. Particle tracking velocimetry (PTV) was used to track the time development of the Lagrangian mean drift. The finite geometry of the wave tank causes a mean return flow that is resolved by mass transport considerations. The measurements clearly demonstrate the importance of the virtual wave stress mechanism in generating wave drift currents near the interface.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Wave Measurements using Open Source Ship Mounted Ultrasonic Altimeter and Motion Correction System during the One Ocean Expedition
Authors:
Judith Thu Ølberg,
Patrik Bohlinger,
Øyvind Breivik,
Kai H. Christensen,
Birgitte R. Furevik,
Lars R. Hole,
Gaute Hope,
Atle Jensen,
Fabian Knoblauch,
Ngoc-Thanh Nguyen,
Jean Rabault
Abstract:
This study reviews the design and signal processing of ship borne ultrasonic altimeter wave measurements. The system combines a downward facing ultrasonic altimeter to capture the sea surface elevation as a time series, and an inertial measurement unit to compensate for the ship's motion. The methodology is cost-effective, open source, and adaptable to various ships and platforms. The system was i…
▽ More
This study reviews the design and signal processing of ship borne ultrasonic altimeter wave measurements. The system combines a downward facing ultrasonic altimeter to capture the sea surface elevation as a time series, and an inertial measurement unit to compensate for the ship's motion. The methodology is cost-effective, open source, and adaptable to various ships and platforms. The system was installed on the barque Statsraad Lehmkuhl and recorded data continuously during the 20-month One Ocean Expedition. Results from 1-month crossing of the Tropical Atlantic are presented here. The one-dimensional wave spectrum and associated wave parameters are obtained from the sea surface elevation time series. The observed significant wave height agrees well with satellite altimetry and a spectral wave model. The agreement between observations and the spectral wave model is better for the mean wave period than the peak period. We perform Doppler shift corrections to improve wave period estimates by accounting for the speed of the ship relative to the waves. This correction enhances the accuracy of the mean period, but not the peak period. We suggest that the Doppler correction could be improved by complementing the data sources with directional wave measurements from a marine X-band radar.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Observation of wave propagation over 1,000 km into Antarctica winter pack ice
Authors:
Takehiko Nose,
Tomotaka Katsuno,
Takuji Waseda,
Shuki Ushio,
Jean Rabault,
Tsubasa Kodaira,
Joey Voermans
Abstract:
A drifting wave-ice buoy, which was configured by mounting the OpenMetBuoy on an ad hoc floating platform that we named Medusa, was deployed at the Lützow-Holm Bay (LHB) marginal ice zone in Antarctica on 4 Feb 2022 during the 63rd Japanese Antarctica research expedition. The wave-ice buoy, Medusa-766, survived the Antarctica winter as the measurement duration reached 333 days. During the winter m…
▽ More
A drifting wave-ice buoy, which was configured by mounting the OpenMetBuoy on an ad hoc floating platform that we named Medusa, was deployed at the Lützow-Holm Bay (LHB) marginal ice zone in Antarctica on 4 Feb 2022 during the 63rd Japanese Antarctica research expedition. The wave-ice buoy, Medusa-766, survived the Antarctica winter as the measurement duration reached 333 days. During the winter months, it was located deep in the ice cover with the shortest distance to the ice-free Southern Ocean over 1,000 km; at this time, there was evidence of ocean wave signals at the buoy position. Using the directional wave spectra obtained from the ECMWF's reanalysis, we show that the Medusa-766 observed waves were likely generated by an extratropical cyclone in the Southern Ocean. Wave-induced ice breakup potential for such an event could extend 100s km into the ice field. When Medusa-766 was in LHB in the summer months, it did not detect sizeable wave energy despite the low sea ice concentration extent even during on-ice waves events. Characterising the considerable differences in the wave attenuation at LHB is needed to elucidate the relative contribution of ocean waves to the unstable LHB fast ice. The success of Medusa-766 demonstrates the robustness of the general design, hardware, firmware, and the high sensitivity of the sensor used. The result is promising for future LHB wave-ice interaction research.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Optimizing Flow Control with Deep Reinforcement Learning: Plasma Actuator Placement around a Square Cylinder
Authors:
Mustafa Z Yousif,
Kolesova Paraskovia,
Yifang Yang,
Meng Zhang,
Linqi Yu,
Jean Rabault,
Ricardo Vinuesa,
HeeChang Lim
Abstract:
The present study proposes an active flow control (AFC) approach based on deep reinforcement learning (DRL) to optimize the performance of multiple plasma actuators on a square cylinder. The investigation aims to modify the control inputs of the plasma actuators to reduce the drag and lift forces affecting the cylinder while maintaining a stable flow regime. The environment of the proposed model i…
▽ More
The present study proposes an active flow control (AFC) approach based on deep reinforcement learning (DRL) to optimize the performance of multiple plasma actuators on a square cylinder. The investigation aims to modify the control inputs of the plasma actuators to reduce the drag and lift forces affecting the cylinder while maintaining a stable flow regime. The environment of the proposed model is represented by a two-dimensional direct numerical simulation (DNS) of a flow past a square cylinder. The control strategy is based on the regulation of the supplied alternating current (AC) voltage at three distinct configurations of the plasma actuators. The effectiveness of the designed strategy is first investigated for Reynolds number, $Re_{D} = 100$, and further applied for $Re_{D} = 180$. The applied active flow control strategy is able to reduce the mean drag coefficient by 97\% at $Re_{D} = 100$ and by 99\% at $Re_D=180$. Furthermore, the results from this study show that with the increase in Reynolds number, it becomes more challenging to eliminate vortex shedding with plasma actuators located only on the rear surface of the cylinder. Nevertheless, the proposed control scheme is able to completely suppress it with an optimized configuration of the plasma actuators.
△ Less
Submitted 17 September, 2023;
originally announced September 2023.
-
Drag-reduction strategies in wall-bounded turbulent flows using deep reinforcement learning
Authors:
L. Guastoni,
J. Rabault,
H. Azizpour,
R. Vinuesa
Abstract:
In this work we compare different drag-reduction strategies that compute their actuation based on the fluctuations at a given wall-normal location in turbulent open channel flow. In order to perform this study, we implement and describe in detail the reinforcement-learning interface to a computationally-efficient, parallelized, high-fidelity solver for fluid-flow simulations. We consider oppositio…
▽ More
In this work we compare different drag-reduction strategies that compute their actuation based on the fluctuations at a given wall-normal location in turbulent open channel flow. In order to perform this study, we implement and describe in detail the reinforcement-learning interface to a computationally-efficient, parallelized, high-fidelity solver for fluid-flow simulations. We consider opposition control (Choi, Moin, and Kim, Journal of Fluid Mechanics 262, 1994) and the policies learnt using deep reinforcement learning (DRL) based on the state of the flow at two inner-scaled locations ($y^+ = 10$ and $y^+ = 15$). By using deep deterministic policy gradient (DDPG) algorithm, we are able to discover control strategies that outperform existing control methods. This represents a first step in the exploration of the capability of DRL algorithm to discover effective drag-reduction policies using information from different locations in the flow.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Active flow control for three-dimensional cylinders through deep reinforcement learning
Authors:
Pol Suárez,
Francisco Alcántara-Ávila,
Arnau Miró,
Jean Rabault,
Bernat Font,
Oriol Lehmkuhl,
R. Vinuesa
Abstract:
This paper presents for the first time successful results of active flow control with multiple independently controlled zero-net-mass-flux synthetic jets. The jets are placed on a three-dimensional cylinder along its span with the aim of reducing the drag coefficient. The method is based on a deep-reinforcement-learning framework that couples a computational-fluid-dynamics solver with an agent usi…
▽ More
This paper presents for the first time successful results of active flow control with multiple independently controlled zero-net-mass-flux synthetic jets. The jets are placed on a three-dimensional cylinder along its span with the aim of reducing the drag coefficient. The method is based on a deep-reinforcement-learning framework that couples a computational-fluid-dynamics solver with an agent using the proximal-policy-optimization algorithm. We implement a multi-agent reinforcement-learning framework which offers numerous advantages: it exploits local invariants, makes the control adaptable to different geometries, facilitates transfer learning and cross-application of agents and results in significant training speedup. In this contribution we report significant drag reduction after applying the DRL-based control in three different configurations of the problem.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
An affordable and customizable wave buoy for the study of wave-ice interactions: design concept and results from field deployments
Authors:
Tsubasa Kodaira,
Tomotaka Katsuno,
Takehiko Nose,
Motoyo Itoh,
Jean Rabault,
Mario Hoppmann,
Masafumi Kimizuka,
Takuji Waseda
Abstract:
In the polar regions, the interaction between waves and ice has a crucial impact on the seasonal change in the sea ice extent. However, our comprehension of this phenomenon is restricted by a lack of observations, which, in turn, results in the exclusion of associated processes from numerical models. In recent years, availability of the low-cost and accurate Inertial Motion Units has enabled the d…
▽ More
In the polar regions, the interaction between waves and ice has a crucial impact on the seasonal change in the sea ice extent. However, our comprehension of this phenomenon is restricted by a lack of observations, which, in turn, results in the exclusion of associated processes from numerical models. In recent years, availability of the low-cost and accurate Inertial Motion Units has enabled the development of affordable wave research devices. Despite advancements in designing innovative open-source instruments optimized for deployment on ice floes, their customizability and survivability remain limited, especially in open waters. This study presents a novel design concept for an affordable and customizable wave buoy, aimed for wave measurements in marginal ice zones. The central focus of this wave buoy design is the application of 3D printing as rapid prototy** technology. By utilizing the high customizability offered by 3D printing, the previously developed solar-powered wave buoy was customized to install a battery pack to continue the measurements in the high latitudes for more than several months. Preliminary results from field deployments in the Pacific and Arctic Oceans demonstrate that the performance of the instruments is promising. The accuracy of frequency wave spectra measurements is found to be comparable to that of considerably more expensive instruments. Finally, the study concludes with a general evaluation of using rapid prototy** technologies for buoy designs and proposes recommendations for future designs.
△ Less
Submitted 3 September, 2023; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Dynamic Feature-based Deep Reinforcement Learning for Flow Control of Circular Cylinder with Sparse Surface Pressure Sensing
Authors:
Qiulei Wang,
Lei Yan,
Gang Hu,
Wenli Chen,
Jean Rabault,
Bernd R. Noack
Abstract:
This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dyn…
▽ More
This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dynamic feature-based DRL (DF-DRL) automatically learns a feedback control in the plant without a dynamic model. Results show that the drag coefficient of the DF-DRL model is 25% less than the vanilla model based on direct sensor feedback. More importantly, using only one surface pressure sensor, DF-DRL can reduce the drag coefficient to a state-of-the-art performance of about 8% at Re = 100 and significantly mitigate lift coefficient fluctuations. Hence, DF-DRL allows the deployment of sparse sensing of the flow without degrading the control performance. This method also shows good robustness in controlling flow under higher Reynolds numbers, which reduces the drag coefficient by 32.2% and 46.55% at Re = 500 and 1000, respectively, indicating the broad applicability of the method. Since surface pressure information is more straightforward to measure in realistic scenarios than flow velocity information, this study provides a valuable reference for experimentally designing the active flow control of a circular cylinder based on wall pressure signals, which is an essential step toward further develo** intelligent control in realistic multi-input multi-output (MIMO) system.
△ Less
Submitted 1 June, 2024; v1 submitted 4 July, 2023;
originally announced July 2023.
-
Estimating sea ice properties from wave observations in sea ice
Authors:
J. J. Voermans,
J. Rabault,
A. Marchenko,
T. Nose,
T. Waseda,
A. V. Babanin
Abstract:
The Marginal Ice Zone is a highly dynamic region where the atmosphere, ocean, waves and sea ice meet. Waves play a fundamental role in this coupled system, but progress in our understanding of wave-ice interactions is currently hindered by the lack of observations of sea ice properties in-situ. In this study we aim to estimate the ice thickness and effective elastic modulus of sea ice passively us…
▽ More
The Marginal Ice Zone is a highly dynamic region where the atmosphere, ocean, waves and sea ice meet. Waves play a fundamental role in this coupled system, but progress in our understanding of wave-ice interactions is currently hindered by the lack of observations of sea ice properties in-situ. In this study we aim to estimate the ice thickness and effective elastic modulus of sea ice passively using observations of waves in ice. Specifically, we use three low-cost geophones deployed in triangular formation with sides of about 200 m on fast ice. The focus here is on three major wave events recorded, each consisting of initial high frequency vibrations with a frequency at around 10 Hz, followed by low frequency dispersive waves within a frequency range of 0.08-0.28 Hz. Based on the phase speed of the initial high frequency vibrations, we estimate the purely elastic effective modulus to be 4-4.5 GPa. By comparing the arrival times of the dispersive low frequency wave events to the dispersion relationship of waves in a thin elastic ice sheet we obtain estimates of the effective elastic modulus in the range of 0.4-0.7 GPa. This is close to the measured effective elastic modulus through cantilever experiments of 0.5 GPa but considerably smaller than the default value of 5.5 GPa currently in use in contemporary wave models. We could not, however, obtain explicit estimates of the ice thickness and effective modulus individually as their impacts on the shape of the dispersion relationship are similar in this frequency range. Distinction is only possible for dispersive wave events larger than about 1 Hz, such as for vibrations generated by (thermal) cracking, which are frequently observed in our dataset. With our results, we show that low-cost geophones can be used to estimate sea ice properties in fast ice and substantiate that this to be possible on very large ice floes as well.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
Recent advances in applying deep reinforcement learning for flow control: perspectives and future directions
Authors:
Colin Vignon,
Jean Rabault,
Ricardo Vinuesa
Abstract:
Deep reinforcement learning (DRL) has been applied to a variety of problems during the past decade, and has provided effective control strategies in high-dimensional and non-linear situations that are challenging to traditional methods. Flourishing applications now spread out into the field of fluid dynamics, and specifically of active flow control (AFC). In the community of AFC, the encouraging r…
▽ More
Deep reinforcement learning (DRL) has been applied to a variety of problems during the past decade, and has provided effective control strategies in high-dimensional and non-linear situations that are challenging to traditional methods. Flourishing applications now spread out into the field of fluid dynamics, and specifically of active flow control (AFC). In the community of AFC, the encouraging results obtained in two-dimensional and chaotic conditions have raised interest to study increasingly complex flows. In this review, we first provide a general overview of the reinforcement-learning (RL) and DRL frameworks, as well as their recent advances. We then focus on the application of DRL to AFC, highlighting the current limitations of the DRL algorithms in this field, and suggesting some of the potential upcoming milestones to reach, as well as open questions that are likely to attract the attention of the fluid-mechanics community.
△ Less
Submitted 27 January, 2023;
originally announced April 2023.
-
Effective control of two-dimensional Rayleigh--Bénard convection: invariant multi-agent reinforcement learning is all you need
Authors:
Colin Vignon,
Jean Rabault,
Joel Vasanth,
Francisco Alcántara-Ávila,
Mikael Mortensen,
Ricardo Vinuesa
Abstract:
Rayleigh-Bénard convection (RBC) is a recurrent phenomenon in several industrial and geoscience flows and a well-studied system from a fundamental fluid-mechanics viewpoint. However, controlling RBC, for example by modulating the spatial distribution of the bottom-plate heating in the canonical RBC configuration, remains a challenging topic for classical control-theory methods. In the present work…
▽ More
Rayleigh-Bénard convection (RBC) is a recurrent phenomenon in several industrial and geoscience flows and a well-studied system from a fundamental fluid-mechanics viewpoint. However, controlling RBC, for example by modulating the spatial distribution of the bottom-plate heating in the canonical RBC configuration, remains a challenging topic for classical control-theory methods. In the present work, we apply deep reinforcement learning (DRL) for controlling RBC. We show that effective RBC control can be obtained by leveraging invariant multi-agent reinforcement learning (MARL), which takes advantage of the locality and translational invariance inherent to RBC flows inside wide channels. The MARL framework applied to RBC allows for an increase in the number of control segments without encountering the curse of dimensionality that would result from a naive increase in the DRL action-size dimension. This is made possible by the MARL ability for re-using the knowledge generated in different parts of the RBC domain. We show in a case study that MARL DRL is able to discover an advanced control strategy that destabilizes the spontaneous RBC double-cell pattern, changes the topology of RBC by coalescing adjacent convection cells, and actively controls the resulting coalesced cell to bring it to a new stable configuration. This modified flow configuration results in reduced convective heat transfer, which is beneficial in several industrial processes. Therefore, our work both shows the potential of MARL DRL for controlling large RBC systems, as well as demonstrates the possibility for DRL to discover strategies that move the RBC configuration between different topological configurations, yielding desirable heat-transfer characteristics. These results are useful for both gaining further understanding of the intrinsic properties of RBC, as well as for develo** industrial applications.
△ Less
Submitted 13 June, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
A comparison of an operational wave-ice model product and drifting wave buoy observation in the central Arctic Ocean: investigating the effect of sea ice forcing in thin ice cover
Authors:
Takehiko Nose,
Jean Rabault,
Takuji Waseda,
Tsubasa Kodaira,
Yasushi Fujiwara,
Tomotaka Katsuno,
Naoya Kanna,
Kazutaka Tateyama,
Joey Voermans,
Tatiana Aleekseva
Abstract:
Two drifting wave buoys were deployed in the central Arctic Ocean, north of the Laptev Sea, where there are historically no wave observations available. An experimental wave buoy was deployed alongside a commercial buoy. The inter-buoy comparison showed that the experimental buoy measured wave heights and periods accurately; so the buoy data were used to study the predictability of a wave-ice mode…
▽ More
Two drifting wave buoys were deployed in the central Arctic Ocean, north of the Laptev Sea, where there are historically no wave observations available. An experimental wave buoy was deployed alongside a commercial buoy. The inter-buoy comparison showed that the experimental buoy measured wave heights and periods accurately; so the buoy data were used to study the predictability of a wave-ice model in this region. The first event we focused was when both buoys observed a sudden decrease in significant wave heights $H_{m0}$. The sudden decrease was caused by the change of wind directions from along the ice edge to off-ice wind. This event was compared with the ARC MFC wave-ice model product, which underestimated the $H_{m0}$. The inaccurate model representation of an ice tongue located upwind of the buoys was found to constrain the available fetch for wave growth. The second case was when the buoys entered ice cover as new ice formed; an on-ice wave event was observed and the buoy downwind measured 1.25 m $H_{m0}$. In this instance, the ARC MFC wave-ice model product largely underestimated the downwind buoy $H_{m0}$. To investigate this event, model sea ice conditions were examined by comparing the ARC MFC sea ice forcing with the neXtSIM sea ice model product. Our analysis revealed that the thin ice thickness distribution for ice types like young and grey ice, typically less than 30 cm, were not resolved. The ARC MFC model's wave dissipation rate has a sea ice thickness dependence, and therefore, it overestimates wave dissipation in thin ice cover; sea ice forcing that can resolve the thin thickness distribution is needed to improve the predictability. This study provides an observational insight into better predictions of waves in marginal ice zones when new ice forms.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Deep reinforcement learning for turbulent drag reduction in channel flows
Authors:
L. Guastoni,
J. Rabault,
P. Schlatter,
H. Azizpour,
R. Vinuesa
Abstract:
We introduce a reinforcement learning (RL) environment to design and benchmark control strategies aimed at reducing drag in turbulent fluid flows enclosed in a channel. The environment provides a framework for computationally-efficient, parallelized, high-fidelity fluid simulations, ready to interface with established RL agent programming interfaces. This allows for both testing existing deep rein…
▽ More
We introduce a reinforcement learning (RL) environment to design and benchmark control strategies aimed at reducing drag in turbulent fluid flows enclosed in a channel. The environment provides a framework for computationally-efficient, parallelized, high-fidelity fluid simulations, ready to interface with established RL agent programming interfaces. This allows for both testing existing deep reinforcement learning (DRL) algorithms against a challenging task, and advancing our knowledge of a complex, turbulent physical system that has been a major topic of research for over two centuries, and remains, even today, the subject of many unanswered questions. The control is applied in the form of blowing and suction at the wall, while the observable state is configurable, allowing to choose different variables such as velocity and pressure, in different locations of the domain. Given the complex nonlinear nature of turbulent flows, the control strategies proposed so far in the literature are physically grounded, but too simple. DRL, by contrast, enables leveraging the high-dimensional data that can be sampled from flow simulations to design advanced control strategies. In an effort to establish a benchmark for testing data-driven control strategies, we compare opposition control, a state-of-the-art turbulence-control strategy from the literature, and a commonly-used DRL algorithm, deep deterministic policy gradient. Our results show that DRL leads to 43% and 46% drag reduction in a minimal and a larger channel (at a friction Reynolds number of 180), respectively, outperforming the classical opposition control by around 20 percentage points.
△ Less
Submitted 8 February, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Bias Correction of Operational Storm Surge Forecasts Using Neural Networks
Authors:
Paulina Tedesco,
Jean Rabault,
Martin Lilleeng Sætra,
Nils Melsom Kristensen,
Ole Johan Aarnes,
Øyvind Breivik,
Cecilie Mauritzen,
Øyvind Sætra
Abstract:
Storm surges can give rise to extreme floods in coastal areas. The Norwegian Meteorological Institute produces 120-hour regional operational storm surge forecasts along the coast of Norway based on the Regional Ocean Modeling System (ROMS), using a model setup called Nordic4-SS. Despite advances in the development of models and computational capabilities, forecast errors remain large enough to imp…
▽ More
Storm surges can give rise to extreme floods in coastal areas. The Norwegian Meteorological Institute produces 120-hour regional operational storm surge forecasts along the coast of Norway based on the Regional Ocean Modeling System (ROMS), using a model setup called Nordic4-SS. Despite advances in the development of models and computational capabilities, forecast errors remain large enough to impact response measures and issued alerts, in particular, during the strongest events. Reducing these errors will positively impact the efficiency of the warning systems while minimizing efforts and resources spent on mitigation. Here, we investigate how forecasts can be improved with residual learning, i.e., training data-driven models to predict the residuals in forecasts from Nordic4-SS. A simple error map** technique and a more sophisticated Neural Network (NN) method are tested. Using the NN residual correction method, the Root Mean Square Error in the Oslo Fjord is reduced by 36% for lead times of one hour and 9% for 24 hours. Therefore, the residual NN method is a promising direction for correcting storm surge forecasts, especially on short timescales. Moreover, it is well adapted to being deployed operationally, as i) the correction is applied on top of the existing model and requires no changes to it, ii) all predictors used for NN inference are already available operationally, iii) prediction by the NNs is very fast, typically a few seconds per station, and iv) the NN correction can be provided to a human expert who may inspect it, compare it with the model output, and see how much correction is brought by the NN, allowing to capitalize on human expertise as a quality validation of the NN output. While no changes to the hydrodynamic model are necessary to calibrate the neural networks, they are specific to a given model and must be recalibrated when the numerical models are updated.
△ Less
Submitted 18 December, 2023; v1 submitted 2 January, 2023;
originally announced January 2023.
-
A field investigation of the friction between cross-country skis and snow
Authors:
Rasmus Nes Tjørstad,
Jean Rabault,
Olav Gundersen,
Atle Jensen
Abstract:
Cross country skiing is an interplay between the active motion of the body of the skier and the physical interaction between the surface of the skis and the snow. Friction and glide between the ski base and the snow depend on the snow temperature, ski surface chemistry and roughness, dry friction with the snow crystals and liquid meltwater film flow properties. Although a great amount of resources…
▽ More
Cross country skiing is an interplay between the active motion of the body of the skier and the physical interaction between the surface of the skis and the snow. Friction and glide between the ski base and the snow depend on the snow temperature, ski surface chemistry and roughness, dry friction with the snow crystals and liquid meltwater film flow properties. Although a great amount of resources are being spent on understanding glide and friction, a basic physical understanding of the phenomena at play is still at large and the methodology used for assessing the gliding quality of different full scale configurations is still coarse in real world applications, which limits novel development of robust methods to control and optimize glide. Such understanding and full scale testing is particularly important for designing new ski gliders. In the present work, we develop a novel experimental setup and use it to investigate through field experiments the basic mechanical phenomena that influence glide and friction of full scale skis on snow. The field setup features a mobile, novel linear tribometer allowing investigation with whole skis in realistic cross-country conditions (speed and load). The coefficient of friction between the skis and snow is obtained from a load cell, which reports the force necessary to pull a ski sled along a flat track. Simultaneously, thermistors measure the temperature at the ski-snow interface. In addition, a GPS measures displacement and velocity. The results obtained are in good agreement with several measurements reported from similar experiments, and provide a real-world validation of results obtained in the laboratory. In addition, we release the general tribometer setup as open source material in order to provide a foundation on which other research teams as well as cross-country teams can further iterate when designing later experiments.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
A dataset of direct observations of sea ice drift and waves in ice
Authors:
Jean Rabault,
Malte Müller,
Joey Voermans,
Dmitry Brazhnikov,
Ian Turnbull,
Aleksey Marchenko,
Martin Biuw,
Takehiko Nose,
Takuji Waseda,
Malin Johansson,
Øyvind Breivik,
Graig Sutherland,
Lars Robert Hole,
Mark Johnson,
Atle Jensen,
Olav Gundersen,
Yngve Kristoffersen,
Alexander Babanin,
Paulina Tedesco,
Kai Haakon Christensen,
Martin Kristiansen,
Gaute Hope,
Tsubasa Kodaira,
Victor de Aguiar,
Catherine Taelman
, et al. (3 additional authors not shown)
Abstract:
Variability in sea ice conditions, combined with strong couplings to the atmosphere and the ocean, lead to a broad range of complex sea ice dynamics. More in-situ measurements are needed to better identify the phenomena and mechanisms that govern sea ice growth, drift, and breakup. To this end, we have gathered a dataset of in-situ observations of sea ice drift and waves in ice. A total of 15 depl…
▽ More
Variability in sea ice conditions, combined with strong couplings to the atmosphere and the ocean, lead to a broad range of complex sea ice dynamics. More in-situ measurements are needed to better identify the phenomena and mechanisms that govern sea ice growth, drift, and breakup. To this end, we have gathered a dataset of in-situ observations of sea ice drift and waves in ice. A total of 15 deployments were performed over a period of 5 years in both the Arctic and Antarctic, involving 72 instruments. These provide both GPS drift tracks, and measurements of waves in ice. The data can, in turn, be used for tuning sea ice drift models, investigating waves dam** by sea ice, and hel** calibrate other sea ice measurement techniques, such as satellite based observations.
△ Less
Submitted 25 October, 2022;
originally announced November 2022.
-
Deep reinforcement learning for flow control exploits different physics for increasing Reynolds-number regimes
Authors:
Pau Varela,
Pol Suárez,
Francisco Alcántara-Ávila,
Arnau Miró,
Jean Rabault,
Bernat Font,
Luis Miguel García-Cuevas,
Oriol Lehmkuhl,
Ricardo Vinuesa
Abstract:
Deep artificial neural networks (ANNs) used together with deep reinforcement learning (DRL) are receiving growing attention due to their capabilities to control complex problems. This technique has been recently used to solve problems related to flow control. In this work, an ANN trained through a DRL agent is used to perform active flow control. Two-dimensional simulations of the flow around a cy…
▽ More
Deep artificial neural networks (ANNs) used together with deep reinforcement learning (DRL) are receiving growing attention due to their capabilities to control complex problems. This technique has been recently used to solve problems related to flow control. In this work, an ANN trained through a DRL agent is used to perform active flow control. Two-dimensional simulations of the flow around a cylinder are conducted and an active control based on two jets located on the walls of the cylinder is considered. By gathering information from the flow surrounding the cylinder, the ANN agent is able to learn effective control strategies for the jets, leading to a significant drag reduction. In the present work, a Reynolds-number range beyond those previously considered is studied and compared with results obtained using classical flow-control methods. Significantly different nature in the control strategies is identified by the DRL as the Reynolds number Re increases. For Re <= 1000 the classical control strategy based on an opposition control relative to the wake oscillation is obtained. For Re = 2000 the new strategy consists of an energisation of the boundary layers and the separation area, which modulate the flow separation and reduce drag in a fashion similar to that of the drag crisis, through a high frequency actuation. A cross-application of agents is performed for a flow at Re = 2000, obtaining similar results in terms of drag reduction with the agents trained at Re = 1000 and 2000. The fact that two different strategies yield the same performance make us question whether this Reynolds number regime (Re = 2000) belongs to a transition towards a nature-different flow which would only admit a high-frequency actuation strategy to obtain drag reduction. This finding allows the application of ANNs trained at lower Reynolds numbers but comparable in nature, saving computational resources.
△ Less
Submitted 4 November, 2022;
originally announced November 2022.
-
DRLinFluids -- An open-source python platform of coupling Deep Reinforcement Learning and OpenFOAM
Authors:
Qiulei Wang,
Lei Yan,
Gang Hu,
Chao Li,
Yiqing Xiao,
Hao Xiong,
Jean Rabault,
Bernd R. Noack
Abstract:
We propose an open-source python platform for applications of Deep Reinforcement Learning (DRL) in fluid mechanics. DRL has been widely used in optimizing decision-making in nonlinear and high-dimensional problems. Here, an agent maximizes a cumulative reward with learning a feedback policy by acting in an environment. In control theory terms, the cumulative reward would correspond to the cost fun…
▽ More
We propose an open-source python platform for applications of Deep Reinforcement Learning (DRL) in fluid mechanics. DRL has been widely used in optimizing decision-making in nonlinear and high-dimensional problems. Here, an agent maximizes a cumulative reward with learning a feedback policy by acting in an environment. In control theory terms, the cumulative reward would correspond to the cost function, the agent to the actuator, the environment to the measured signals and the learned policy to the feedback law. Thus, DRL assumes an interactive environment or, equivalently, control plant. The setup of a numerical simulation plant with DRL is challenging and time-consuming. In this work, a novel python platform, named DRLinFluids is developed for this purpose, with DRL for flow control and optimization problems in fluid mechanics. The simulations employ OpenFOAM as popular, flexible Navier-Stokes solver in industry and academia, and Tensorforce or Tianshou as widely used versatile DRL packages. The reliability and efficiency of DRLinFluids are demonstrated for two wake stabilization benchmark problems. DRLinFluids significantly reduces the application effort of DRL in fluid mechanics and is expected to greatly accelerates academic and industrial applications.
△ Less
Submitted 25 May, 2022;
originally announced May 2022.
-
Comparative analysis of machine learning methods for active flow control
Authors:
Fabio Pino,
Lorenzo Schena,
Jean Rabault,
Miguel A. Mendez
Abstract:
Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework…
▽ More
Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework of the model-free control problem, bringing together all methods as black-box optimization problems. Then, we test the control algorithms on three test cases. These are (1) the stabilization of a nonlinear dynamical system featuring frequency cross-talk, (2) the wave cancellation from a Burgers' flow and (3) the drag reduction in a cylinder wake flow. We present a comprehensive comparison to illustrate their differences in exploration versus exploitation and their balance between `model capacity' in the control law definition versus `required complexity'. We believe that such a comparison paves the way toward the hybridization of the various methods, and we offer some perspective on their future development in the literature on flow control problems.
△ Less
Submitted 9 November, 2022; v1 submitted 23 February, 2022;
originally announced February 2022.
-
OpenMetBuoy-V2021: an easy-to-build, affordable, customizable, open source instrument for oceanographic measurements of drift and waves in sea ice and the open ocean
Authors:
Jean Rabault,
Takehiko Nose,
Gaute Hope,
Malte Muller,
Oyvind Breivik,
Joey Voermans,
Lars Robert Hole,
Patrik Bohlinger,
Takuji Waseda,
Tsubasa Kodaira,
Tomotaka Katsuno,
Mark Johnson,
Graig Sutherland,
Malin Johanson,
Kai Haakon Christensen,
Adam Garbo,
Atle Jensen,
Olav Gundersen,
Aleksey Marchenko,
Alexander Babanin
Abstract:
There is a wide consensus within the polar science, meteorology, and oceanography communities that more in-situ observations of the ocean, atmosphere, and sea ice, are required to further improve operational forecasting model skills. Traditionally, the volume of such measurements has been limited by the high cost of commercially available instruments. An increasingly attractive solution to this co…
▽ More
There is a wide consensus within the polar science, meteorology, and oceanography communities that more in-situ observations of the ocean, atmosphere, and sea ice, are required to further improve operational forecasting model skills. Traditionally, the volume of such measurements has been limited by the high cost of commercially available instruments. An increasingly attractive solution to this cost issue is to use instruments produced in-house from open source hardware, firmware, and post processing building blocks. In the present work, we release the next iteration of the open source drifter and waves monitoring instruments. The new design is both significantly less expensive, much easier to build and assemble for people without specific microelectronics and programming competence, more easily extendable and customizable, and two orders of magnitude more power efficient. Improving performance and reducing noise levels and costs compared with our previous generation of instruments is possible in large part thanks to progress from the electronics component industry. As a result, we believe that this will allow scientists in geosciences to increase by an order of magnitude the amount of in-situ data they can collect under a constant instrumentation budget. In the following, we offer 1) detailed overview of our hardware and software solution, 2) in-situ validation and benchmarking of our instrument, 3) full open source release of both hardware and software blueprints. We hope that this work, and the associated open source release, may be a milestone that will allow our scientific fields to transition towards open source, community driven instrumentation. We believe that this could have a considerable impact on many fields, by making in-situ instrumentation at least an order of magnitude less expensive and more customizable than it has been for the last 50 years.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Grid turbulence measurements with an acoustic Doppler current profiler
Authors:
Trygve. K. Løken,
David Roger Lande-Sudall,
Atle Jensen,
Jean Rabault
Abstract:
The motivation for this study is to investigate the abilities and limitations of a Nortek Signature1000 acoustic Doppler current profiler (ADCP) regarding fine-scale turbulence measurements. Current profilers offer the advantage of gaining more coherent measurement data than available with point acoustic measurements, and it is desirable to exploit this property in laboratory and field application…
▽ More
The motivation for this study is to investigate the abilities and limitations of a Nortek Signature1000 acoustic Doppler current profiler (ADCP) regarding fine-scale turbulence measurements. Current profilers offer the advantage of gaining more coherent measurement data than available with point acoustic measurements, and it is desirable to exploit this property in laboratory and field applications. The ADCP was tested in a towing tank, where turbulence was generated from a grid towed under controlled conditions. Grid-induced turbulence is a well-studied phenomenon and a good approximation for isotropic turbulence. Several previous experiments are available for comparison and there are developed theories within the topic. In the present experiments, an acoustic Doppler velocimeter (ADV), which is an established instrument for turbulence measurements, was applied to validate the ADCP. It was found that the mean flow measured with the ADCP was accurate within 4% of the ADV. The turbulent variance was reasonably well resolved by the ADCP when large grid bars were towed at a high speed, but largely overestimated for lower towing speed and smaller grid bars. The effective cutoff frequency and turbulent eddy size were characterized experimentally, which provides detailed guidelines for when the ADCP data can be trusted and will allow future experimentalists to decide a priori if the Nortek Signature can be used in their setup. We conclude that the ADCP is not suitable for resolving turbulent spectra in a small-scale grid-induced flow due to the intrinsic Doppler noise and the low spatial and temporal sample resolution relative to the turbulent scales.
△ Less
Submitted 19 November, 2021;
originally announced November 2021.
-
Turbulent kinetic energy dissipation from colliding ice floes
Authors:
Trygve K. Løken,
Aleksey Marchenko,
Thea J. Ellevold,
Jean Rabault,
Atle Jensen
Abstract:
Increased knowledge about wave attenuation processes in sea ice, and hence atmosphere-wave-ice-ocean energy transfer, is necessary to improve sea ice dynamics models used for climate modeling and offshore applications. The aim of this study is to generate such much needed data by investigating colliding ice floes dynamics in a large-scale experiment and directly measuring and quantifying the turbu…
▽ More
Increased knowledge about wave attenuation processes in sea ice, and hence atmosphere-wave-ice-ocean energy transfer, is necessary to improve sea ice dynamics models used for climate modeling and offshore applications. The aim of this study is to generate such much needed data by investigating colliding ice floes dynamics in a large-scale experiment and directly measuring and quantifying the turbulent kinetic energy (TKE). The field work was carried out at Van Mijen Fjord on Svalbard, where a 3x4 m ice floe was sawed out in the fast ice. Wave motion was simulated by pulling the ice floe back and forth in an oscillatory manner in a 4x6 m pool, using two electrical winches. Ice floe motion was measured with a range meter and accelerometers, and the water turbulence was measured acoustically with an acoustic Doppler current profiler and optically with a remotely operated vehicle and bubbles as tracers. TKE frequency spectra were found to contain an inertial subrange where energy was cascading at a rate proportional to the -5/3 power law. The TKE dissipation rate was found to decrease exponentially with depth. The total TKE dissipation rate was estimated by assuming that turbulence was induced over an area corresponding to the surface of the floe. The results suggest that approximately 37% and 8% of the input power from the winches was dissipated in turbulence and absorbed in the collisions, respectively, which experimentally confirms that energy dissipation by induced turbulent water motion is an important mechanism for colliding ice floe fields.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
An application of data driven reward of deep reinforcement learning by dynamic mode decomposition in active flow control
Authors:
Sheng Qin,
Shuyue Wang,
Jean Rabault,
Gang Sun
Abstract:
This paper focuses on the active flow control (AFC) of the flow over a circular cylinder with synthetic jets through deep reinforcement learning (DRL) by implementing a reward function based on dynamic mode decomposition (DMD). As a main factor that affects the DRL model, the reward is determined by the information extracted from flow field by performing DMD on measurements through simulation. Wit…
▽ More
This paper focuses on the active flow control (AFC) of the flow over a circular cylinder with synthetic jets through deep reinforcement learning (DRL) by implementing a reward function based on dynamic mode decomposition (DMD). As a main factor that affects the DRL model, the reward is determined by the information extracted from flow field by performing DMD on measurements through simulation. With the data-driven reward, the DRL model is able to learn the AFC policy through the more global information of the field, and instructs the mass flow rate of the synthetic jets. As a result of this type of AFC, the vortex street is stabilized with a reduction of approximately 8% in drag and an improvement of approximately 109% in recirculation area. Furthermore, the configuration of the flow modified by the AFC is studied with DMD on the velocity measurement of the complete flow field.
△ Less
Submitted 7 August, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Iceberg stability during towing in a wave field
Authors:
Trygve K. Løken,
Aleksey Marchenko,
Jean Rabault,
Olav Gundersen,
Atle Jensen
Abstract:
Due to their large mass and small aspect ratio, icebergs pose a threat to boats and offshore structures. Small icebergs and bergy bits can cause harm to platform hulls and are more difficult to discover remotely. As icebergs are dynamic mediums, the study of icebergs in relation to safe human operations requires the rigorous analysis of the ice-ocean interaction, in particular with waves and curre…
▽ More
Due to their large mass and small aspect ratio, icebergs pose a threat to boats and offshore structures. Small icebergs and bergy bits can cause harm to platform hulls and are more difficult to discover remotely. As icebergs are dynamic mediums, the study of icebergs in relation to safe human operations requires the rigorous analysis of the ice-ocean interaction, in particular with waves and currents. In this paper, we present iceberg towing experiments and analyze iceberg stability from GPS tracks and inertial motion unit data. The towline tension as well as the boat motion relative to the iceberg was measured. Different scenarios were investigated by changing the towing strategy with regards to towing speed, direction (straight or curved trajectory) and acceleration. Large amplitude roll oscillations with period of approximately 30 s were observed immediately after the load dropped and the iceberg returned to a stable static position. In two of the cases, the iceberg flipped over partly or entirely after some towing time. From the load cell, we observed oscillations in the system with periods of approximately 6 s, which were attributed to the rope elastic properties and the iceberg response. The load oscillations increased when the towing direction was against the waves as opposed to perpendicular to the waves.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
An investigation into the turbulence induced by moving ice floes
Authors:
Trygve K. Løken,
Aleksey Marchenko,
Thea J. Ellevold,
Jean Rabault,
Atle Jensen
Abstract:
Several phenomena are known to attenuate waves in the marginal ice zone, such as wave scattering due to ice floes, viscous dissipation inside the ice and energy dissipation caused by ice floe interactions. Our aim of this study is to investigate colliding ice floes and to quantify the Turbulent Kinetic Energy (TKE) dissipation in the surrounding water through direct observations. The field work wa…
▽ More
Several phenomena are known to attenuate waves in the marginal ice zone, such as wave scattering due to ice floes, viscous dissipation inside the ice and energy dissipation caused by ice floe interactions. Our aim of this study is to investigate colliding ice floes and to quantify the Turbulent Kinetic Energy (TKE) dissipation in the surrounding water through direct observations. The field work was carried out in Van Mijen Fjord on Svalbard, where an artificial 3x4 m^2 ice floe was sawed out in the 1 m thick ice. Wave motion was simulated by pulling the ice floe back and forth in an oscillatory manner with two electrical winches in a 4x6 m^2 pool. Ice floe motion was measured with a range meter, and the water turbulence was measured with acoustic velocimeters. TKE frequency spectra were found to contain an inertial subrange where energy was cascading at a rate proportional to f^(-5/3). From the spectra estimated at several vertical positions, the TKE dissipation rate was found to decrease exponentially with depth. The total TKE dissipation rate was estimated by assuming that turbulence was induced over an area spanning over the ice floe width and the pool length. The preliminary energy budget suggests that approximately 60% of the input power from the winches was dissipated in turbulence, which experimentally confirms that energy dissipation by induced turbulent water motion is an important mechanism for colliding ice floe fields.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Bringing optical fluid motion analysis to the field: a methodology using an open source ROV as camera system and rising bubbles as tracers
Authors:
Trygve K. Løken,
Thea J. Ellevold,
Reyna G. Ramirez de la Torre,
Jean Rabault,
Atle Jensen
Abstract:
Detailed water kinematics are important for understanding atmosphere-ice-ocean energy transfer processes in the Arctic. There are few in situ observations of 2D velocity fields in the marginal ice zone. Particle tracking velocimetry and particle image velocimetry are well known laboratory techniques for measuring 2D velocity fields, but they usually rely on fragile equipment and pollutive plastic…
▽ More
Detailed water kinematics are important for understanding atmosphere-ice-ocean energy transfer processes in the Arctic. There are few in situ observations of 2D velocity fields in the marginal ice zone. Particle tracking velocimetry and particle image velocimetry are well known laboratory techniques for measuring 2D velocity fields, but they usually rely on fragile equipment and pollutive plastic tracers. Therefore, in order to bring these methods to the field, we have developed a new system which combines a compact open-source remotely operated vehicle as an imaging device, and air bubbles as tracing particles. The data obtained can then be analyzed using image processing techniques tuned for field measurements in the polar regions. The properties of the generated bubbles, such as the relation between terminal velocity and diameter, have been investigated under controlled conditions. The accuracy and the spread of the velocity measurements have been quantified in a wave tank and compared with theoretical solutions. Horizontal velocity components under periodic waves were measured within the order of 10% accuracy. The deviation from theoretical solutions is attributed to the bubble inertia due to the accelerated flow. We include an example from an Arctic field expedition where the system was deployed and successfully tested from an ice floe. This work is an important milestone towards performing detailed 2D flow measurements under the ice in the Arctic, which we anticipate will help perform much needed direct observations of the dynamics happening under sea ice.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Experimental evidence for a universal threshold characterizing wave-induced sea ice break-up
Authors:
J. J. Voermans,
J. Rabault,
K. Filchuk,
I. Ryzhov,
P. Heil,
A. Marchenko,
C. Collins,
M. Dabboor,
G. Sutherland,
A. V. Babanin
Abstract:
Waves can drastically transform a sea ice cover by inducing break-up over vast distances in the course of a few hours. However, relatively few detailed studies have described this phenomenon in a quantitative manner, and the process of sea ice break-up by waves needs to be further parameterized and verified before it can be reliably included in forecasting models. In the present work, we discuss s…
▽ More
Waves can drastically transform a sea ice cover by inducing break-up over vast distances in the course of a few hours. However, relatively few detailed studies have described this phenomenon in a quantitative manner, and the process of sea ice break-up by waves needs to be further parameterized and verified before it can be reliably included in forecasting models. In the present work, we discuss sea ice break-up parameterization and demonstrate the existence of an observational threshold separating breaking and non-breaking cases. This threshold is based on information from two recent field campaigns, supplemented with existing observations of sea ice break-up. The data used cover a wide range of scales, from laboratory-grown sea ice to polar field observations. Remarkably, we show that both field and laboratory observations tend to converge to a single quantitative threshold at which the wave-induced sea ice break-up takes place, which opens a promising avenue for robust parametrization in operational forecasting models.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Applying deep reinforcement learning to active flow control in turbulent conditions
Authors:
Feng Ren,
Jean Rabault,
Hui Tang
Abstract:
Machine learning has recently become a promising technique in fluid mechanics, especially for active flow control (AFC) applications. A recent work [J. Fluid Mech. (2019), vol. 865, pp. 281-302] has demonstrated the feasibility and effectiveness of deep reinforcement learning (DRL) in performing AFC over a circular cylinder at $Re = 100$, i.e., in the laminar flow regime. As a follow-up study, we…
▽ More
Machine learning has recently become a promising technique in fluid mechanics, especially for active flow control (AFC) applications. A recent work [J. Fluid Mech. (2019), vol. 865, pp. 281-302] has demonstrated the feasibility and effectiveness of deep reinforcement learning (DRL) in performing AFC over a circular cylinder at $Re = 100$, i.e., in the laminar flow regime. As a follow-up study, we investigate the same AFC problem at an intermediate Reynolds number, i.e., $Re = 1000$, where the turbulence in the flow poses great challenges to the control. The results show that the DRL agent can still find effective control strategies, but requires much more episodes in the learning. A remarkable drag reduction of around $30\%$ is achieved, which is accompanied by elongation of the recirculation bubble and reduction of turbulent fluctuations in the cylinder wake. To our best knowledge, this study is the first successful application of DRL to AFC in weak turbulent conditions. It therefore sets a new milestone in progressing towards AFC in strong turbulent flows.
△ Less
Submitted 18 July, 2020; v1 submitted 18 June, 2020;
originally announced June 2020.
-
Robust active flow control over a range of Reynolds numbers using an artificial neural network trained through deep reinforcement learning
Authors:
Hongwei Tang,
Jean Rabault,
Alexander Kuhnle,
Yan Wang,
Tongguang Wang
Abstract:
This paper focuses on the active flow control of a computational fluid dynamics simulation over a range of Reynolds numbers using deep reinforcement learning (DRL). More precisely, the proximal policy optimization (PPO) method is used to control the mass flow rate of four synthetic jets symmetrically located on the upper and lower sides of a cylinder immersed in a two-dimensional flow domain. The…
▽ More
This paper focuses on the active flow control of a computational fluid dynamics simulation over a range of Reynolds numbers using deep reinforcement learning (DRL). More precisely, the proximal policy optimization (PPO) method is used to control the mass flow rate of four synthetic jets symmetrically located on the upper and lower sides of a cylinder immersed in a two-dimensional flow domain. The learning environment supports four flow configurations with Reynolds numbers 100, 200, 300 and 400, respectively. A new smoothing interpolation function is proposed to help the PPO algorithm to learn to set continuous actions, which is of great importance to effectively suppress problematic jumps in lift and allow a better convergence for the training process. It is shown that the DRL controller is able to significantly reduce the lift and drag fluctuations and to actively reduce the drag by approximately 5.7%, 21.6%, 32.7%, and 38.7%, at $Re$=100, 200, 300, and 400 respectively. More importantly, it can also effectively reduce drag for any previously unseen value of the Reynolds number between 60 and 400. This highlights the generalization ability of deep neural networks and is an important milestone to active flow control.
△ Less
Submitted 26 April, 2020;
originally announced April 2020.
-
A comparison of wave observations in the Arctic marginal ice zone with spectral models
Authors:
Trygve K. Løken,
Jean Rabault,
Erin E. Thomas,
Malte Müller,
Kai H. Christensen,
Graig Sutherland,
Atle Jensen
Abstract:
Increased economic activity and research interest in the Arctic raise the need for better wave forecasts in the marginal ice zone (MIZ). Mathematical and numerical models of wave propagation in sea ice would benefit from more in situ data for validation. This study presents shipborne wave measurements from the MIZ where altimeter readings are corrected for ship motion to obtain estimated single po…
▽ More
Increased economic activity and research interest in the Arctic raise the need for better wave forecasts in the marginal ice zone (MIZ). Mathematical and numerical models of wave propagation in sea ice would benefit from more in situ data for validation. This study presents shipborne wave measurements from the MIZ where altimeter readings are corrected for ship motion to obtain estimated single point ocean surface elevation. From the combined measurements, we obtain significant wave height and zero up-crossing period, as well as one-dimensional wave spectra. In addition, we provide spectra and integrated parameters obtained from inertial motion units (IMU) placed on ice floes inside the MIZ. The results are compared with integrated parameters from the WAM-4 spectral wave model over a period of three days in the open ocean. We also compare our measurements outside and inside the MIZ with hindcast data from the new pan-Arctic WAM-3 model and the Wave Watch III model for the European Arctic, which both model wave attenuation in sea ice. A good agreement is found with WAM-4 and WW3 in zero up-crossing period and significant wave height outside the MIZ, where deviations are less than 23%. WAM-3 is on the other hand up to 60% higher than observations. WW3 and WAM-3 are able to estimate the trends for significant wave height and zero up-crossing period inside the MIZ, although the discrepancies with respect to the observations were larger than in the open ocean. Wave dam** by sea ice is investigated by looking at the spatial attenuation coefficients. Predicted attenuation coefficients are found to be 72-83% smaller for WW3 and 3-64% larger for WAM-3 compared to observations. Hence, further model tuning is necessary to better estimate wave parameters in the ice.
△ Less
Submitted 4 December, 2020; v1 submitted 20 March, 2020;
originally announced March 2020.
-
Development of open source instruments for in-situ measurements of waves in ice
Authors:
Jean Rabault,
Joey Voermans,
Graig Sutherland,
Atle Jensen,
Alexander Babanin,
Kirill Filchuk
Abstract:
The interaction between surface waves and sea ice involves many complex physical phenomena such as viscous dam**, wave diffraction, and nonlinear effects. The combination of these phenomena, together with considerable variability in ice configuration, ranging from viscous grease ice slicks to large icebergs through closed drift ice and landfast ice, makes it challenging to develop robust and acc…
▽ More
The interaction between surface waves and sea ice involves many complex physical phenomena such as viscous dam**, wave diffraction, and nonlinear effects. The combination of these phenomena, together with considerable variability in ice configuration, ranging from viscous grease ice slicks to large icebergs through closed drift ice and landfast ice, makes it challenging to develop robust and accurate waves in ice models. In this context, a reason for the challenges modellers are facing may lie in the mismatch between the relative scarcity of waves in ice data available for testing theories, and the wide diversity of phenomena happening at sea. This lack of experimental data may be explained, at least in part, by the high cost of waves in ice instruments. Therefore, development of open source, low-cost, high-performance instrumentation may be a critical factor in hel** advance this field of research. Here, we present recent developments of a new generation of open source waves in ice instruments featuring a high accuracy Inertial Motion Unit as well as GPS, on-board processing power, solar panel, and Iridium communications. Those instruments are now being used by several groups, and their simple and modular design allows them to be customized for specific needs quickly and at reduced cost. Therefore, they may be an important factor in allowing more data to be gathered in a cost-effective way, providing much-needed data to the waves in ice community. This approach is here validated by presenting recent sea ice drift and wave activity data, and comparing these results with those obtained with commercially available buoys. In addition, our design may be used as a general platform for cost-effective development of other in-situ instruments with similar requirements of low-power data logging, on-board computational power, and satellite communications.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
Deep Reinforcement Learning in Fluid Mechanics: a promising method for both Active Flow Control and Shape Optimization
Authors:
Jean Rabault,
Feng Ren,
Wei Zhang,
Hui Tang,
Hui Xu
Abstract:
In recent years, Artificial Neural Networks (ANNs) and Deep Learning have become increasingly popular across a wide range of scientific and technical fields, including Fluid Mechanics. While it will take time to fully grasp the potentialities as well as the limitations of these methods, evidence is starting to accumulate that point to their potential in hel** solve problems for which no theoreti…
▽ More
In recent years, Artificial Neural Networks (ANNs) and Deep Learning have become increasingly popular across a wide range of scientific and technical fields, including Fluid Mechanics. While it will take time to fully grasp the potentialities as well as the limitations of these methods, evidence is starting to accumulate that point to their potential in hel** solve problems for which no theoretically optimal solution method is known. This is particularly true in Fluid Mechanics, where problems involving optimal control and optimal design are involved. Indeed, such problems are famously difficult to solve effectively with traditional methods due to the combination of non linearity, non convexity, and high dimensionality they involve. By contrast, Deep Reinforcement Learning (DRL), a method of optimization based on teaching empirical strategies to an ANN through trial and error, is well adapted to solving such problems. In this short review, we offer an insight into the current state of the art of the use of DRL within fluid mechanics, focusing on control and optimal design problems.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Wave measurements from ship mounted sensors in the Arctic marginal ice zone
Authors:
Trygve K. Løken,
Jean Rabault,
Atle Jensen,
Graig Sutherland,
Kai H. Christensen,
Malte Müller
Abstract:
Increased research interest and economic activity in the Arctic raise the need for new observations of sea ice dynamics. Remote sensing as well as mathematical and numerical models of wave propagation in sea ice would benefit from more in situ data for validation. This study presents wave measurements in the marginal ice zone (MIZ) obtained from ship mounted sensors. The system combines altimeter…
▽ More
Increased research interest and economic activity in the Arctic raise the need for new observations of sea ice dynamics. Remote sensing as well as mathematical and numerical models of wave propagation in sea ice would benefit from more in situ data for validation. This study presents wave measurements in the marginal ice zone (MIZ) obtained from ship mounted sensors. The system combines altimeter readings from the ship bow with ship motion correction data to provide estimated single point ocean surface elevation. Significant wave height and mean wave period, as well as one-dimensional wave spectra are derived from the combined measurements. The results are compared with integrated parameters from a spectral wave model over a period of eight days in the open ocean, and with spectra and integrated parameters derived from motion detecting instruments placed on ice floes inside the MIZ. Mean absolute errors of the integrated parameters are in the range 15.0-18.9% when comparing with the spectral wave model and 1.0-9.6% when comparing with valid motion detecting instruments. The spatial wave dam** coefficient is estimated by looking at the change in spectral wave amplitude found at discrete frequency values as the ship was moving along the longitudinal direction of the MIZ within time intervals where the wave field is found to be approximately constant in time. As expected from theory, high frequency waves are effectively dampened by the presence of sea ice. The observed wave attenuation rates compare favourably with a two-layer dissipation model. Our methodology can be regarded as a simple and reliable way to collect more waves-in-ice data as it can be easily added to any ship participating to ice expeditions, at little extra cost.
△ Less
Submitted 4 December, 2020; v1 submitted 18 November, 2019;
originally announced November 2019.
-
Exploiting locality and physical invariants to design effective Deep Reinforcement Learning control of the unstable falling liquid film
Authors:
Vincent Belus,
Jean Rabault,
Jonathan Viquerat,
Zhizhao Che,
Elie Hachem,
Ulysse Reglade
Abstract:
Instabilities arise in a number of flow configurations. One such manifestation is the development of interfacial waves in multiphase flows, such as those observed in the falling liquid film problem. Controlling the development of such instabilities is a problem of both academic and industrial interest. However, this has proven challenging in most cases due to the strong nonlinearity and high dimen…
▽ More
Instabilities arise in a number of flow configurations. One such manifestation is the development of interfacial waves in multiphase flows, such as those observed in the falling liquid film problem. Controlling the development of such instabilities is a problem of both academic and industrial interest. However, this has proven challenging in most cases due to the strong nonlinearity and high dimensionality of the underlying equations. In the present work, we successfully apply Deep Reinforcement Learning (DRL) for the control of the one-dimensional (1D) depth-integrated falling liquid film. In addition, we introduce for the first time translational invariance in the architecture of the DRL agent, and we exploit locality of the control problem to define a dense reward function. This allows to both speed up learning considerably, and to easily control an arbitrary large number of jets and overcome the curse of dimensionality on the control output size that would take place using a naive approach. This illustrates the importance of the architecture of the agent for successful DRL control, and we believe this will be an important element in the effective application of DRL to large two-dimensional (2D) or three-dimensional (3D) systems featuring translational, axisymmetric or other invariants.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Direct shape optimization through deep reinforcement learning
Authors:
Jonathan Viquerat,
Jean Rabault,
Alexander Kuhnle,
Hassan Ghraieb,
Aurélien Larcher,
Elie Hachem
Abstract:
Deep Reinforcement Learning (DRL) has recently spread into a range of domains within physics and engineering, with multiple remarkable achievements. Still, much remains to be explored before the capabilities of these methods are well understood. In this paper, we present the first application of DRL to direct shape optimization. We show that, given adequate reward, an artificial neural network tra…
▽ More
Deep Reinforcement Learning (DRL) has recently spread into a range of domains within physics and engineering, with multiple remarkable achievements. Still, much remains to be explored before the capabilities of these methods are well understood. In this paper, we present the first application of DRL to direct shape optimization. We show that, given adequate reward, an artificial neural network trained through DRL is able to generate optimal shapes on its own, without any prior knowledge and in a constrained time. While we choose here to apply this methodology to aerodynamics, the optimization process itself is agnostic to details of the use case, and thus our work paves the way to new generic shape optimization strategies both in fluid mechanics, and more generally in any domain where a relevant reward function can be defined.
△ Less
Submitted 19 December, 2020; v1 submitted 23 August, 2019;
originally announced August 2019.
-
A review on Deep Reinforcement Learning for Fluid Mechanics
Authors:
Paul Garnier,
Jonathan Viquerat,
Jean Rabault,
Aurélien Larcher,
Alexander Kuhnle,
Elie Hachem
Abstract:
Deep reinforcement learning (DRL) has recently been adopted in a wide range of physics and engineering domains for its ability to solve decision-making problems that were previously out of reach due to a combination of non-linearity and high dimensionality. In the last few years, it has spread in the field of computational mechanics, and particularly in fluid dynamics, with recent applications in…
▽ More
Deep reinforcement learning (DRL) has recently been adopted in a wide range of physics and engineering domains for its ability to solve decision-making problems that were previously out of reach due to a combination of non-linearity and high dimensionality. In the last few years, it has spread in the field of computational mechanics, and particularly in fluid dynamics, with recent applications in flow control and shape optimization. In this work, we conduct a detailed review of existing DRL applications to fluid mechanics problems. In addition, we present recent results that further illustrate the potential of DRL in Fluid Mechanics. The coupling methods used in each case are covered, detailing their advantages and limitations. Our review also focuses on the comparison with classical methods for optimal control and optimization. Finally, several test cases are described that illustrate recent progress made in this field. The goal of this publication is to provide an understanding of DRL capabilities along with state-of-the-art applications in fluid dynamics to researchers wishing to address new problems with these methods.
△ Less
Submitted 25 February, 2021; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Wave-ice interaction in the North-West Barents Sea
Authors:
Aleksey Marchenko,
Peter Wadhams,
Clarence O Collins,
Jean Rabault,
Mikhail Chumakov
Abstract:
The results of field work on drift ice during wave propagation are analyzed and presented. The field work was performed in the Barents Sea, and the main focus of the paper is on wave processes in the MIZ. A model of wave dam** in broken ice is formulated and applied to interpret the field work results. It is confirmed that waves of higher frequencies are subjected to stronger dam** when they p…
▽ More
The results of field work on drift ice during wave propagation are analyzed and presented. The field work was performed in the Barents Sea, and the main focus of the paper is on wave processes in the MIZ. A model of wave dam** in broken ice is formulated and applied to interpret the field work results. It is confirmed that waves of higher frequencies are subjected to stronger dam** when they propagate below the ice. This reduces the frequency of most energetic wave with increasing distance from the ice edge. Difference of wave spectra measured in two relatively close locations within the MIZ is discussed. The complicated geometry and dynamics of the MIZ in the North-West Barents Sea allow waves from the Atlantic Ocean and south regions of the Barents Sea to penetrate into different locations of the MIZ.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
Accelerating Deep Reinforcement Learning strategies of Flow Control through a multi-environment approach
Authors:
Jean Rabault,
Alexander Kuhnle
Abstract:
Deep Reinforcement Learning (DRL) has recently been proposed as a methodology to discover complex Active Flow Control (AFC) strategies [Rabault, J., Kuchta, M., Jensen, A., Reglade, U., & Cerardi, N. (2019): "Artificial neural networks trained through deep reinforcement learning discover control strategies for active flow control", Journal of Fluid Mechanics, 865, 281-302]. However, while promisin…
▽ More
Deep Reinforcement Learning (DRL) has recently been proposed as a methodology to discover complex Active Flow Control (AFC) strategies [Rabault, J., Kuchta, M., Jensen, A., Reglade, U., & Cerardi, N. (2019): "Artificial neural networks trained through deep reinforcement learning discover control strategies for active flow control", Journal of Fluid Mechanics, 865, 281-302]. However, while promising results were obtained on a simple 2D benchmark flow at a moderate Reynolds number, considerable speedups will be required to investigate more challenging flow configurations. In the case of DRL trained with Computational Fluid Dynamics (CFD) data, it was found that the CFD part, rather than training the Artificial Neural Network, was the limiting factor for speed of execution. Therefore, speedups should be obtained through a combination of two approaches. The first one, which is well documented in the literature, is to parallelize the numerical simulation itself. The second one is to adapt the DRL algorithm for parallelization. Here, a simple strategy is to use several independent simulations running in parallel to collect experiences faster. In the present work, we discuss this solution for parallelization. We illustrate that perfect speedups can be obtained up to the batch size of the DRL agent, and slightly suboptimal scaling still takes place for an even larger number of simulations. This is, therefore, an important step towards enabling the study of more sophisticated Fluid Mechanics problems through DRL.
△ Less
Submitted 16 September, 2019; v1 submitted 25 June, 2019;
originally announced June 2019.
-
Curving to fly: Synthetic adaptation unveils optimal flight performance of whirling fruits
Authors:
Jean Rabault,
Richard A. Fauli,
Andreas Carlson
Abstract:
Appendages of seeds, fruits and other diaspores (dispersal units) are essential for their wind dispersal, as they act as wings and enable them to fly. Whirling fruits generate an auto-gyrating motion from their sepals, a leaf like structure, which curve upwards and outwards, creating a lift force that counteracts gravitational force. The link of the fruit's sepal shape to flight performance, howev…
▽ More
Appendages of seeds, fruits and other diaspores (dispersal units) are essential for their wind dispersal, as they act as wings and enable them to fly. Whirling fruits generate an auto-gyrating motion from their sepals, a leaf like structure, which curve upwards and outwards, creating a lift force that counteracts gravitational force. The link of the fruit's sepal shape to flight performance, however, is as yet unknown. We develop a theoretical model and perform experiments for double-winged bio-mimetic 3D-printed fruits, where we assume that the plant has a limited amount of energy that it can convert into a mass to build sepals and, additionally, allow them to curve. Both hydrodynamic theory and experiments involving synthetic, double-winged fruits show that to produce a maximal flight time there is an optimal fold angle for the desiccated sepals. A similar sepal fold angle is found for a wide range of whirling fruits collected in the wild, highlighting that wing curvature can aid as an efficient mechanism for wind dispersal of seeds and may improve the fitness of their producers in the context of an ecological strategy.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Laboratory investigations of the bending rheology of floating saline ice, and physical mechanisms of wave dam**, in the HSVA ice tank
Authors:
Aleksey Marchenko,
Andrea Haase,
Atle Jensen,
Benjamin Lishman,
Jean Rabault,
Karl-Ulrich Evers,
Mark Shortt,
Torsten Thiel
Abstract:
An experiment on the propagation of flexural-gravity waves was performed in the HSVA ice tank. Physical characteristics of the water-ice system were measured in different locations in the tank during the tests, with a number of sensors deployed in the water, on the ice and in the air. Water velocity was measured with an acoustic doppler velocimeter (ADV) and an acoustic doppler current profiler (A…
▽ More
An experiment on the propagation of flexural-gravity waves was performed in the HSVA ice tank. Physical characteristics of the water-ice system were measured in different locations in the tank during the tests, with a number of sensors deployed in the water, on the ice and in the air. Water velocity was measured with an acoustic doppler velocimeter (ADV) and an acoustic doppler current profiler (ADCP); wave amplitudes were measured with ultrasonic sensors and the optical system Qualisys; in-plane deformations of the ice and the temperature of the ice and water were measured by fiber optic sensors, and acoustic emissions were recorded with compressional crystal sensors. All together 61 tests were performed, with ice thicknesses of 3 cm and 5 cm. The experimental setup and selected results of the tests are discussed in this paper. We show that cyclic motion of the ice along the tank, imitating ice drift, causes an increase in wave dam**. We also show that the formation of non-through cracks in the ice, caused by the action of waves, increases wave dam**.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
An Open Source, Versatile, Affordable Waves in Ice Instrument for Scientific Measurements in the Polar Regions
Authors:
Jean Rabault,
Graig Sutherland,
Olav Gundersen,
Atle Jensen,
Aleksey Marchenko,
Øyvind Breivik
Abstract:
Sea ice is a major feature of the polar environments. Recent changes in the climate and extent of the sea ice, together with increased economic activity and research interest in these regions, are driving factors for new measurements of sea ice dynamics. Waves in ice are important as they participate in the coupling between the open ocean and the ice-covered regions. Measurements are challenging t…
▽ More
Sea ice is a major feature of the polar environments. Recent changes in the climate and extent of the sea ice, together with increased economic activity and research interest in these regions, are driving factors for new measurements of sea ice dynamics. Waves in ice are important as they participate in the coupling between the open ocean and the ice-covered regions. Measurements are challenging to perform due to remoteness and harsh environmental conditions. While progress has been made in observing wave propagtion in sea ice using remote methods, these are still relatively new measurements and would benefit from more in situ data for validation. In this article, we present an open source instrument that was developed for performing such measurements. The versatile design includes an ultra-low power unit, a microcontroller-based logger, a small microcomputer for on-board data processing, and an Iridium modem for satellite communications. Virtually any sensor can be used with this design. In the present case, we use an Inertial Motion Unit to record wave motion. High quality results were obtained, which opens new possibilities for in situ measurements in the polar regions. Our instrument can be easily customized to fit many in situ measurement tasks, and we hope that our work will provide a framework for future developments of a variety of such open source instruments.
△ Less
Submitted 28 August, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.