-
Errors in single pixel photography emerging from light collection limits by the bucket detector
Authors:
Dennis Scheidt,
Pedro A. Quinto-Su
Abstract:
In single pixel photography an image is sampled with a programmable optical element like a digital micromirror array or a spatial light modulator that can project an orthogonal base. The light reflected or diffracted is collected by a lens and measured with a photodiode (bucket detector). In this work we demonstrate that single pixel photography that uses sampling bases with non-zero off-diagonal…
▽ More
In single pixel photography an image is sampled with a programmable optical element like a digital micromirror array or a spatial light modulator that can project an orthogonal base. The light reflected or diffracted is collected by a lens and measured with a photodiode (bucket detector). In this work we demonstrate that single pixel photography that uses sampling bases with non-zero off-diagonal elements (i.e. Hadamard), can be susceptible to errors that emerge from the relative size of the bucket detector area compared with the spatial spread of the Fourier spectrum of the base element that has the the highest spatial frequency. Experiments with a spatial light modulator and simulations using a Hadamard basis show that if the bucket detector area is smaller than between $50-75\%$ of the maximum area spanned by the projected spectrum of the measurement basis, the reconstructed photograph will exhibit cross-talk with the effective phase of the optical system. The phase can be encoded or errors can be introduced in the optical system to demonstrate this effect.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Sha** the angular spectrum of a Bessel beam to enhance light transfer through dynamic strongly-scattering media
Authors:
Dennis Scheidt,
Alejandro Vasquez Arzola,
Pedro Antonio Quinto-Su
Abstract:
We prepare a quasi-non-diffracting Bessel beam defined within an annular angular spectrum with a spatial light modulator. The beam propagates though a strongly scattering media and the transmitted speckle pattern is measured at one point with a Hadamard Walsh basis that divides the ring into $N$ segments ($N=16,64,256, 1024$). The phase of the transmitted beam is reconstructed with 3 step interfer…
▽ More
We prepare a quasi-non-diffracting Bessel beam defined within an annular angular spectrum with a spatial light modulator. The beam propagates though a strongly scattering media and the transmitted speckle pattern is measured at one point with a Hadamard Walsh basis that divides the ring into $N$ segments ($N=16,64,256, 1024$). The phase of the transmitted beam is reconstructed with 3 step interferometry and the intensity of the transmitted beam is optimized by projecting the conjugate phase at the SLM. We find that the optimum intensity is attained for the condition that the transverse wave vector $k_\perp$ (of the Bessel beam) matches the spatial azimuthal frequencies of the segmented ring $k_φ$. Furthermore, compared with beams defined on a 2d grid (i.e. Gaussian) a reasonable enhancement is achieved for all the $k_\perp$ sampled with only 64 elements. Finally, the measurements can be done while the scatterer is moving as long as the total displacement during the measurement is smaller than the speckle correlation distance.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Interferometric measurement of arbitrary propagating vector beams that are tightly focused
Authors:
Pedro A. Quinto-Su
Abstract:
In this work we demonstrate a simple setup to generate and measure arbitrary vector beams that are tightly focused. The vector beams are created with a spatial light modulator and focused with a microscope objective with an effective numerical aperture of 1.2. The transverse polarization components ($E_x$, $E_y$) of the tightly focused vector beams are measured with 3 step interferometry. The axia…
▽ More
In this work we demonstrate a simple setup to generate and measure arbitrary vector beams that are tightly focused. The vector beams are created with a spatial light modulator and focused with a microscope objective with an effective numerical aperture of 1.2. The transverse polarization components ($E_x$, $E_y$) of the tightly focused vector beams are measured with 3 step interferometry. The axial component $E_z$ is reconstructed using the transverse fields with Gauss law. We measure beams with the following polarization states: circular, radial, azimuthal, spiral, flower and spider web.
△ Less
Submitted 2 April, 2023;
originally announced April 2023.
-
Simple computer program to calculate arbitrary tightly focused (propagating and evanescent) vector light fields
Authors:
Isael Herrera,
Pedro A. Quinto-Su
Abstract:
In this work we present a simple code to calculate tightly focused vectorial light fields (propagating and evanescent) generated by input fields that have arbitrary amplitude, phase and polarization. The program considers results from previous studies, like integration via fast Fourier transforms to speed up the integration. The calculations are done in a Cartesian coordinate system that is conven…
▽ More
In this work we present a simple code to calculate tightly focused vectorial light fields (propagating and evanescent) generated by input fields that have arbitrary amplitude, phase and polarization. The program considers results from previous studies, like integration via fast Fourier transforms to speed up the integration. The calculations are done in a Cartesian coordinate system that is convenient to compare with experimental results for beams that are shaped with programmable optical elements like spatial light modulators or digital micromirror arrays. We also discuss how to avoid diverging terms at the origin by shifting the angular mesh by half a point and correcting the output by cancelling the phase term that arises from the shifted Fourier transform.
△ Less
Submitted 12 November, 2022;
originally announced November 2022.
-
Bullseye focusing of cylindrical waves at a liquid-solid interface
Authors:
Ulisses J. Gutiérrez-Hernández,
Hendrik Reese,
Claus-Dieter Ohl,
Pedro A. Quinto-Su
Abstract:
Two converging and superimposing shock and Rayleigh waves are generated on a glass substrate by focusing laser pulses on two concentric rings in a bullseye configuration (67\mm~and 96\mm~radii). We study experimentally the threshold for substrate damage as a function of the number of repetitions and the delay (0-20\,ns). The bullseye focusing experiments are compared to a single focusing ring. Add…
▽ More
Two converging and superimposing shock and Rayleigh waves are generated on a glass substrate by focusing laser pulses on two concentric rings in a bullseye configuration (67\mm~and 96\mm~radii). We study experimentally the threshold for substrate damage as a function of the number of repetitions and the delay (0-20\,ns). The bullseye focusing experiments are compared to a single focusing ring. Additionally, fluid-structure interaction simulations using a Volume-of-Fluid framework are utilized to estimate the stresses. The lowest number of repetitions to attain surface damage is found for constructive superposition of the Rayleigh waves, i.e., here for a delay of $10\,$ns. The observed damage is consistent with the simulations where the largest positive stresses ($\sim 5.6\,$GPa) are achieved for bullseye focusing with \dt = 10\,ns, followed by \dt= 20\,ns which corresponds to simultaneous shock wave focusing. In all these cases, the positive stresses are followed (a few nanoseconds later) by negative stresses that can reach $\sim-6.4\,$GPa.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Measurement of a wavelength sized optical vortex knot
Authors:
I. A. Herrera-Hernández,
C. A. Mojica-Casique,
P. A. Quinto-Su
Abstract:
In the past decade, optical vortex knots with axial dimensions on the order of $10^2-10^5$ wavelengths ($λ$) have been implemented in the laboratory. However, many potential applications require a drastic reduction on the the size of these knots to the order of $λ$. In this work, we show the first measurement of an optical vortex knot (trefoil) with an axial length of $1.99\, λ$ contained within a…
▽ More
In the past decade, optical vortex knots with axial dimensions on the order of $10^2-10^5$ wavelengths ($λ$) have been implemented in the laboratory. However, many potential applications require a drastic reduction on the the size of these knots to the order of $λ$. In this work, we show the first measurement of an optical vortex knot (trefoil) with an axial length of $1.99\, λ$ contained within a volume ($x\times y\times z$) of $1.90\times 2.19\times 1.99 \, λ^3$. Prior to focusing, the laser light is linearly polarized ($x$, horizontal) and we observe the knot in the dominant $x$ polarization component of the tightly focused field. We also observe the transition of the trefoil knot to a couple of vortex loops via reconnection of the vortex lines as we change the spatial scale of the angular spectrum representation of the field.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Measurement of structured tightly focused vector beams with classical interferometry
Authors:
Isael A. Herrera-Hernández,
Pedro A. Quinto-Su
Abstract:
We report the first measurement with no approximations of the full field of tightly focused vector beams (NA up to $1.23$) across areas of $\sim 9-49\,λ^2$. Prior to focusing, the structured laser light has a linear or circular polarization state. The transverse components are extracted directly from 12 interferograms using 4 step interferometry, while the longitudinal component is extracted from…
▽ More
We report the first measurement with no approximations of the full field of tightly focused vector beams (NA up to $1.23$) across areas of $\sim 9-49\,λ^2$. Prior to focusing, the structured laser light has a linear or circular polarization state. The transverse components are extracted directly from 12 interferograms using 4 step interferometry, while the longitudinal component is extracted from the transverse fields with Gauss law. Different structured beams are measured to demonstrate that the method works for any field geometry. In the case of circular polarization we use vortex beams to verify the appearance of spin-orbit coupling in the axial component. The measurements are compared with simulations with normalized cross correlations that yield mean values $\geq 0.8$, confirming good agreement.
△ Less
Submitted 18 July, 2021;
originally announced July 2021.
-
Microparticle transport networks with holographic optical tweezers and cavitation bubbles
Authors:
Pedro A. Quinto-Su
Abstract:
Optical transport networks for active absorbing microparticles are made with holographic optical tweezers. The particles are powered by the optical potentials that make the network and transport themselves via random vapor propelled hops to different traps without the requirement for external forces or microfabricated barriers. The geometries explored for the optical traps are square lattices, cir…
▽ More
Optical transport networks for active absorbing microparticles are made with holographic optical tweezers. The particles are powered by the optical potentials that make the network and transport themselves via random vapor propelled hops to different traps without the requirement for external forces or microfabricated barriers. The geometries explored for the optical traps are square lattices, circular arrays and random arrays. The degree distribution for the connections or possible paths between the traps are localized like in the case of random networks. The commute times to travel across $n$ different traps scale as $n^2$, in agreement with random walks on connected networks. Once a particle travels the network, others are attracted as a result of the vapor explosions.
△ Less
Submitted 11 August, 2019;
originally announced August 2019.
-
Morphological properties of 2D symmetric Airy beams extracted from the stationary wave approximation
Authors:
F. Camas-Aquino,
P. A. Quinto-Su,
R. Jáuregui
Abstract:
We explore the morphological properties of symmetric Airy beams in the paraxial and nonparaxial regimes. We consider a 2D electromagnetic realization with a single transverse component of the electric field, and in the nonparaxial regime, the longitudinal component along the optic axis. The general structure of these beams is analyzed with the combination of several approaches: geometrical optics…
▽ More
We explore the morphological properties of symmetric Airy beams in the paraxial and nonparaxial regimes. We consider a 2D electromagnetic realization with a single transverse component of the electric field, and in the nonparaxial regime, the longitudinal component along the optic axis. The general structure of these beams is analyzed with the combination of several approaches: geometrical optics through the use of caustics, the asymptotic wave properties of the light field using the stationary wave approximation and numerical integration. The geometrical optics approach involves locating the critical points that are later used in the stationary phase approximation. In the paraxial regime the highest order of the roots is 3, while in the nonparaxial regime, the order can be of up to 6. The technique yields conditions to identify interesting features on the beam, like the number of waves interfering constructively/destructively at the critical positions. The results are confirmed by the numerical simulations. In this way it is possible to distinguish and classify phase singularities like optical vortices and dislocations. The developed algorithm could be used to study any structured light field.
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
Phase dependent vectorial current control in symmetric noisy optical ratchets
Authors:
Magda G. Sánchez-Sánchez,
Roberto de J. León-Montiel,
Pedro A. Quinto-Su
Abstract:
In this work we demonstrate single microparticle transport in a symmetric noisy optical ratchet where each potential is a low power ($<2.5$ mW) three dimensional trap. The optical potentials consist of 20 symmetric optical traps arranged in a one-dimensional lattice produced by a spatial light modulator. The external periodic force of the ratchet system adds to zero over one period (symmetric) and…
▽ More
In this work we demonstrate single microparticle transport in a symmetric noisy optical ratchet where each potential is a low power ($<2.5$ mW) three dimensional trap. The optical potentials consist of 20 symmetric optical traps arranged in a one-dimensional lattice produced by a spatial light modulator. The external periodic force of the ratchet system adds to zero over one period (symmetric) and is generated by the motion of a piezo-electric microscope stage. Transport is achieved by adding noise to the potentials by randomly varying the diffracted power into the traps at the same frequency of the external force. We show that the direction and speed of motion (current) is coupled to the phase difference between the noise in the optical potentials and the external periodic force.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Single-bubble and multi-bubble cavitation in water triggered by laser-driven focusing shock waves
Authors:
D. Veysset,
U. Gutiérrez-Hernández,
L. Dresselhaus-Cooper,
F. De Colle,
S. Kooi,
K. A. Nelson,
P. A. Quinto-Su,
T. Pezeril
Abstract:
In this study a single laser pulse spatially shaped into a ring is focused into a thin water layer, creating an annular cavitation bubble and cylindrical shock waves: an outer shock that diverges away from the excitation laser ring and an inner shock that focuses towards the center. A few nanoseconds after the converging shock reaches the focus and diverges away from the center, a single bubble nu…
▽ More
In this study a single laser pulse spatially shaped into a ring is focused into a thin water layer, creating an annular cavitation bubble and cylindrical shock waves: an outer shock that diverges away from the excitation laser ring and an inner shock that focuses towards the center. A few nanoseconds after the converging shock reaches the focus and diverges away from the center, a single bubble nucleates at the center. The inner diverging shock then reaches the surface of the annular laser-induced bubble and reflects at the boundary, initiating nucleation of a tertiary bubble cloud. In the present experiments, we have performed time-resolved imaging of shock propagation and bubble wall motion. Our experimental observations of single-bubble cavitation and collapse and appearance of ring-shaped bubble clouds are consistent with our numerical simulations that solve a one dimensional Euler equation in cylindrical coordinates. The numerical results agree qualitatively with the experimental observations of the appearance and growth of bubble clouds at the smallest laser excitation rings. Our technique of shock-driven bubble cavitation opens novel perspectives for the investigation of shock-induced single-bubble or multi-bubble cavitation phenomena in thin liquids.
△ Less
Submitted 29 March, 2018; v1 submitted 20 September, 2017;
originally announced September 2017.
-
Noise-Enabled Optical Ratchets
Authors:
Roberto de J. León-Montiel,
Pedro A. Quinto-Su
Abstract:
In this work we demonstrate single microparticle transport enabled by noise in a one dimensional optical lattice with periodic symmetric potentials and a small constant external force. The one dimensional lattice is implemented by six focused beams with holographic optical tweezers, where a microparticle is trapped in three dimensions. Transport initiates when dynamical disorder is added to the di…
▽ More
In this work we demonstrate single microparticle transport enabled by noise in a one dimensional optical lattice with periodic symmetric potentials and a small constant external force. The one dimensional lattice is implemented by six focused beams with holographic optical tweezers, where a microparticle is trapped in three dimensions. Transport initiates when dynamical disorder is added to the diffracted laser power at each trap ($\pm 30\%$) at a fixed frequency (0 to 35 Hz), while the direction of motion is set by the constant external force. We find that transport is only achieved within a narrow noise frequency range, which is consistent with simulations, and the predicted behavior and observations of noise-induced energy transport in quantum and classical systems. To our knowledge this is the first direct observation of noise-assisted transport in a colloidal system.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
Transient trap** of two microparticles interacting with optical tweezers and cavitation bubbles
Authors:
Viridiana Carmona-Sosa,
Pedro A. Quinto-Su
Abstract:
In this work we show that two absorbing microbeads can briefly share the same optical trap. Optical forces pull the particles towards the waist of the trap** beam. However, once a particle reaches the vicinity of the waist, the surrounding liquid is superheated creating an explosion or cavitation bubble that pushes the particle away while lengthening or shortening the trajectories of the surroun…
▽ More
In this work we show that two absorbing microbeads can briefly share the same optical trap. Optical forces pull the particles towards the waist of the trap** beam. However, once a particle reaches the vicinity of the waist, the surrounding liquid is superheated creating an explosion or cavitation bubble that pushes the particle away while lengthening or shortening the trajectories of the surrounding particles. In this way each particle briefly interacts with the beam waist at different times. We find that when two microbeads reach the waist simultaneously, a larger explosion might result in ejection from the trap. We measure the characteristic timescale of two particle coalescence near the waist and find a Poisson decaying exponential probability distribution. The results are consistent with a simple simulation and show why the characteristic timescales for transient trap** of multiple absorbing particles decrease as more objects are added.
△ Less
Submitted 11 September, 2016; v1 submitted 10 December, 2015;
originally announced December 2015.
-
Characterization of periodic cavitation in an optical tweezer
Authors:
Viridiana Carmona-Sosa,
José E. Alba-Arroyo,
Pedro A. Quinto-Su
Abstract:
Microscopic vapor explosions or cavitation bubbles can be generated periodically in an optical tweezer with a microparticle that partially absorbs at the trap** laser wavelength. In this work we measure the size distribution and the production rate of cavitation bubbles for microparticles with a diameter of 3 $μ$m using high speed video recording and a fast photodiode. We find that there is a lo…
▽ More
Microscopic vapor explosions or cavitation bubbles can be generated periodically in an optical tweezer with a microparticle that partially absorbs at the trap** laser wavelength. In this work we measure the size distribution and the production rate of cavitation bubbles for microparticles with a diameter of 3 $μ$m using high speed video recording and a fast photodiode. We find that there is a lower bound for the maximum bubble radius $R_{max}\sim 2~μ$m which can be explained in terms of the microparticle size. More than $94 \%$ of the measured $R_{max}$ are in the range between 2 and 6 $μ$m, while the same percentage of the measured individual frequencies $f_i$ or production rates are between 10 and 200 Hz. The photodiode signal yields an upper bound for the lifetime of the bubbles, which is at most twice the value predicted by the Rayleigh equation. We also report empirical relations between $R_{max}$, $f_i$ and the bubble lifetimes.
△ Less
Submitted 15 January, 2016; v1 submitted 22 July, 2015;
originally announced July 2015.
-
Natural focusing of symmetric Airy beams
Authors:
R. Jauregui,
P. A. Quinto-Su
Abstract:
In this work we study the natural focusing of Airy beams symmetric under reflection of the transverse coordinates. Following a recent proposal, their angular spectra depend on the absolute value of the third power of the transverse components of the wave vector. We show that these beams are related to Airy and Scorer special functions. The caustics have a morphology that does not correspond to the…
▽ More
In this work we study the natural focusing of Airy beams symmetric under reflection of the transverse coordinates. Following a recent proposal, their angular spectra depend on the absolute value of the third power of the transverse components of the wave vector. We show that these beams are related to Airy and Scorer special functions. The caustics have a morphology that does not correspond to the ones described by standard catastrophe optics. The structural stability of symmetric Airy beams is experimentally probed
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
Observation of non-diffracting behavior at the single-photon level
Authors:
Hector Cruz-Ramirez,
Roberto Ramirez-Alarcon,
Francisco J. Morelos,
Pedro A. Quinto-Su,
Julio C. Gutierrez-Vega,
Alfred B. U'Ren
Abstract:
We demonstrate the generation of non-diffracting heralded single photons, i.e. which are characterized by a single-photon transverse intensity distribution which remains essentially unchanged over a significant propagation distance. For this purpose we have relied on the process of spontaneous parametric downconversion (SPDC) for the generation of signal and idler photon pairs, where our SPDC crys…
▽ More
We demonstrate the generation of non-diffracting heralded single photons, i.e. which are characterized by a single-photon transverse intensity distribution which remains essentially unchanged over a significant propagation distance. For this purpose we have relied on the process of spontaneous parametric downconversion (SPDC) for the generation of signal and idler photon pairs, where our SPDC crystal is pumped by a Bessel-Gauss (BG) beam. Our experiment shows that the well-understood non-diffracting behavior of a BG beam may be directly mapped to the signal-mode, single photons heralded by the detection of a single idler photon. In our experiment, the heralded single photon is thus arranged to be non-diffracting without the need for projecting its single-photon transverse amplitude, post-generation, in any manner.
△ Less
Submitted 26 June, 2013; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Birth and growth of cavitation bubbles within water under tension confined in a simple synthetic tree
Authors:
Olivier Vincent,
Philippe Marmottant,
Pedro A. Quinto-Su,
Claus-Dieter Ohl
Abstract:
Water under tension, as can be found in several systems including tree vessels, is metastable. Cavitation can spontaneously occur, nucleating a bubble. We investigate the dynamics of spon- taneous or triggered cavitation inside water filled microcavities of a hydrogel. Results show that a stable bubble is created in only a microsecond timescale, after transient oscillations. Then, a diffusion driv…
▽ More
Water under tension, as can be found in several systems including tree vessels, is metastable. Cavitation can spontaneously occur, nucleating a bubble. We investigate the dynamics of spon- taneous or triggered cavitation inside water filled microcavities of a hydrogel. Results show that a stable bubble is created in only a microsecond timescale, after transient oscillations. Then, a diffusion driven expansion leads to filling of the cavity. Analysis reveals that the nucleation of a bubble releases a tension of several tens of MPa, and a simple model captures the different time scales of the expansion process.
△ Less
Submitted 13 November, 2012; v1 submitted 20 May, 2011;
originally announced May 2011.
-
Isotopic difference in the heteronuclear loss rate in a two-species surface trap
Authors:
M. E. Holmes,
M. Tscherneck,
P. A. Quinto-Su,
N. P. Bigelow
Abstract:
We have realized a two-species mirror-magneto-optical trap containing a mixture of $^{87}$Rb ($^{85}$Rb) and $^{133}$Cs atoms. Using this trap, we have measured the heteronuclear collisional loss rate $β_{Rb-Cs}'$ due to intra-species cold collisions. We find a distinct difference in the magnitude and intensity dependence of $β_{Rb-Cs}'$ for the two isotopes $^{87}$Rb and $^{85}$Rb which we attr…
▽ More
We have realized a two-species mirror-magneto-optical trap containing a mixture of $^{87}$Rb ($^{85}$Rb) and $^{133}$Cs atoms. Using this trap, we have measured the heteronuclear collisional loss rate $β_{Rb-Cs}'$ due to intra-species cold collisions. We find a distinct difference in the magnitude and intensity dependence of $β_{Rb-Cs}'$ for the two isotopes $^{87}$Rb and $^{85}$Rb which we attribute to the different ground-state hyperfine splitting energies of the two isotopes.
△ Less
Submitted 17 December, 2003;
originally announced December 2003.
