Showing 1–50 of 70 results for author: Qu, K

Strong Chirality Suppression in 1-D correlated Weyl Semimetal (TaSe4)2I

Authors: Utkarsh Khandelwal, Harshvardhan Jog, Shupeng Xu, Yicong Chen, Kejian Qu, Chengxi Zhao, Eugene Mele, Daniel P. Shoemaker, Ritesh Agarwal

Abstract: The interaction of light with correlated Weyl semimetals (WSMs) provides a unique platform for exploring non-equilibrium phases and fundamental properties such as chirality. Here, we investigate the structural chirality of (TaSe4)2I, a correlated WSM, under weak optical pum** using Circular Photogalvanic Effect (CPGE) measurements and Raman spectroscopy. Surprisingly, we find that there is a los… ▽ More The interaction of light with correlated Weyl semimetals (WSMs) provides a unique platform for exploring non-equilibrium phases and fundamental properties such as chirality. Here, we investigate the structural chirality of (TaSe4)2I, a correlated WSM, under weak optical pum** using Circular Photogalvanic Effect (CPGE) measurements and Raman spectroscopy. Surprisingly, we find that there is a loss of chirality in (TaSe4)2I above a threshold light intensity. We suggest that the loss of chirality is due to an optically driven phase transition into an achiral structure distinct from the ground state. This structural transformation is supported by fluence-dependent Raman spectra, revealing a new peak at low pump fluences that disappears above the threshold fluence. The loss of chirality even at low optical powers suggests that the system quickly transitions into a non WSM phase, and also highlights the importance of considering light-induced structural interactions in understanding the behavior of correlated systems. These studies showcase that even low excitation powers can be used to control the properties of correlated topological systems, opening up new avenues for low power optical devices. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 21 pages, 4 figures

Spin chirality engineering induced giant topological Hall effect in a kagome magnet

Authors: Wei Xia, Shihao Zhang, Jian Yuan, Yurui Wei, Haonan Wang, Hong Du, Xiangqi Liu, Jiangteng Guo, Zicheng Tao, Ke Qu, Xia Wang, Xuerong Liu, Wenbo Wang, **guang Cheng, Yulin Chen, Jianpeng Liu, Ruidan Zhong, Xuewen Fu, Zhenzhong Yang, Yanfeng Guo

Abstract: The ferrimagnet TbMn6Sn6 has attracted vast attention, because its pristine Mn kagome lattice with strong spin-orbit coupling and out-of-plane Tb-Mn exchange supports quantum-limit Chern topological magnetism which can be described by the simple spinless Haldane model. We unveil herein that engineering the pristine kagome lattice through partial replacement of Mn by nonmagnetic Cr which tends to c… ▽ More The ferrimagnet TbMn6Sn6 has attracted vast attention, because its pristine Mn kagome lattice with strong spin-orbit coupling and out-of-plane Tb-Mn exchange supports quantum-limit Chern topological magnetism which can be described by the simple spinless Haldane model. We unveil herein that engineering the pristine kagome lattice through partial replacement of Mn by nonmagnetic Cr which tends to concentrate into the single Mn1 layer in a unit cell breaks the collinear configuration of Mn spins and reduces the D6h point group symmetry to the C2 one. The nearly isolated Tb networks result in easily polarized Tb spins even under a weak magnetic field, and simultaneously, different spin chirality of the Tb-Mn1-Mn1 and Mn1-Mn1-Mn1. Such a peculiar spin structure leads to a plateau-like topological Hall effect with a record resistivity of 19.1 μOhm cm among bulk systems. Our direct visualization of the domain-wall structure and its evolution under external magnetic field fully support the picture, thus highlighting the pivotal role of broken kagome lattice symmetry in generating the peculiar spin chirality in real space. Our results set a paradigm for exploration of exotic properties in kagome topological magnets and would be a proof-of-principle strategy for investigating the correlation between magnetism and exotic topological properties in kagome lattice. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Comments: 33 pages,4 main figures and 16 SI figures

Direct visualization of the impurity occupancy roadmap in Ni-substituted van der Waals ferromagnet Fe3GaTe2

Authors: Jian Yuan, Haonan Wang, Xiaofei Hou, Binshuo Zhang, Yurui Wei, Jiangteng Guo, Lu Sun, Zhenhai Yu, Zhikai Li, Xiangqi Liu, Wei Xia, Xia Wang, Xuerong Liu, Yulin Chen, Shihao Zhang, Xuewen Fu, Ke Qu, Zhenzhong Yang, Yanfeng Guo

Abstract: Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadma… ▽ More Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadmap for Ni substitution in Fe3GaTe2, a van der Waals ferromagnet with the Curie temperature TC even reaching ~ 380 K. The results unambiguously reveal that in (Fe1-xNix)3GaTe2, Ni atoms initially form an van der Waals interlayer gap Ni3 sites when x < 0.1, and then gradually occupy the Fe2 sites. After replacing the Fe2 sites at x of ~ 0.75, they start to substitute for the Fe1 sites and eventually realize a full occupation at x = 1.0. Accordingly, TC and saturation magnetic moments of (Fe1-xNix)3GaTe2 both show nonlinear decrease, which is tightly tied to the Ni occupancy order as well as the different roles of Ni3, Fe1 and Fe2 sites in the spin Hamiltonian. The results not only yield fruitful insights into the essential roles of different Fe sites in producing the above room temperature high TC, but also set a paradigm for future impurity substitution study on other quantum materials. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: 24 pages,5 main figures+4 SI figures+2 SI tables

Magnetic anisotropy in single-crystalline antiferromagnetic Mn$_2$Au

Authors: Mebatsion S. Gebre, Rebecca K. Banner, Kisung Kang, Kejian Qu, Huibo Cao, André Schleife, Daniel P. Shoemaker

Abstract: Multiple recent studies have identified the metallic antiferromagnet Mn$_2$Au to be a candidate for spintronic applications due to apparent in-plane anisotropy, preserved magnetic properties above room temperature, and current-induced Néel vector switching. Crystal growth is complicated by the fact that Mn$_2$Au melts incongruently. We present a bismuth flux method to grow millimeter-scale bulk si… ▽ More Multiple recent studies have identified the metallic antiferromagnet Mn$_2$Au to be a candidate for spintronic applications due to apparent in-plane anisotropy, preserved magnetic properties above room temperature, and current-induced Néel vector switching. Crystal growth is complicated by the fact that Mn$_2$Au melts incongruently. We present a bismuth flux method to grow millimeter-scale bulk single crystals of Mn$_2$Au in order to examine the intrinsic anisotropic electrical and magnetic properties. Flux quenching experiments reveal that the Mn$_2$Au crystals precipitate below 550°C, about 100°C below the decomposition temperature of Mn$_2$Au. Bulk Mn$_2$Au crystals have a room-temperature resistivity of 16-19 $μΩ$-cm and a residual resistivity ratio of 41. Mn$_2$Au crystals have a dimensionless susceptibility on the order of 10$^{-4}$, comparable to calculated and experimental reports on powder samples. Single-crystal neutron diffraction confirms the in-plane magnetic structure. The tetragonal symmetry of Mn$_2$Au constrains the $ab$-plane magnetic susceptibility to be constant, meaning that $χ_{100}=χ_{110}$ in the low-field limit, below any spin-flop transition. We find that three measured magnetic susceptibilities $χ_{100}$, $χ_{110}$, and $χ_{001}$ are the same order of magnitude and agree with the calculated prediction, meaning the low-field susceptibility of Mn$_2$Au is quite isotropic, despite clear differences in $ab$-plane and $ac$-plane magnetocrystalline anisotropy. Mn$_2$Au is calculated to have an extremely high in-plane spin-flop field above 30 T, which is much larger than that of another in-plane antiferromagnet Fe$_2$As (less than 1 T). The subtle anisotropy of intrinsic susceptibilities may lead to dominating effects from shape, crystalline texture, strain, and defects in devices that attempt spin readout in Mn$_2$Au. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: 9 pages, 10 figures, 15 pages supplemental

Unified Integrated Sensing and Communication Signal Design: A Sphere Packing Perspective

Authors: Shuaishuai Guo, Kaiqian Qu

Abstract: The design of communication signal sets is fundamentally a sphere packing problem. It aims to identify a set of M points in an N -dimensional space, with the objective of maximizing the separability of points that represent different bits.In contrast, signals used for sensing targets should ideally be asdeterministic as possible. This paper explores the inherent conflict and trade-off between comm… ▽ More The design of communication signal sets is fundamentally a sphere packing problem. It aims to identify a set of M points in an N -dimensional space, with the objective of maximizing the separability of points that represent different bits.In contrast, signals used for sensing targets should ideally be asdeterministic as possible. This paper explores the inherent conflict and trade-off between communication and sensing when these functions are combined within the same signal set. We present a unified approach to signal design in the time, frequency, and space domains for integrated sensing and communication (ISAC), framing it as a modified sphere packing problem. Through adept formula manipulation, this problem is transformed into a large-scale quadratic constrained quadratic programming (QCQP) challenge. We propose an augmented Lagrangian and dual ascent (ALDA) algorithm for iterative problem-solving. The computational complexity of this approach is analyzed and found to be daunting for large, high-dimensional signal set designs. To address this, we introduce a bit-dimension-power splitting (BDPS) method. This method decomposes the large-scale QCQP into a series of smaller-scale problems that can be solved more efficiently and in parallel, significantly reducing the overall computational load. Extensive simulations have been conducted to validate the effectiveness of our proposed signal design methods in the context of ISAC. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: submitted to IEEE TCOM

Accuracy-Aware Cooperative Sensing and Computing for Connected Autonomous Vehicles

Authors: Xuehan Ye, Kaige Qu, Weihua Zhuang, Xuemin Shen

Abstract: To maintain high perception performance among connected and autonomous vehicles (CAVs), in this paper, we propose an accuracy-aware and resource-efficient raw-level cooperative sensing and computing scheme among CAVs and road-side infrastructure. The scheme enables fined-grained partial raw sensing data selection, transmission, fusion, and processing in per-object granularity, by exploiting the pa… ▽ More To maintain high perception performance among connected and autonomous vehicles (CAVs), in this paper, we propose an accuracy-aware and resource-efficient raw-level cooperative sensing and computing scheme among CAVs and road-side infrastructure. The scheme enables fined-grained partial raw sensing data selection, transmission, fusion, and processing in per-object granularity, by exploiting the parallelism among object classification subtasks associated with each object. A supervised learning model is trained to capture the relationship between the object classification accuracy and the data quality of selected object sensing data, facilitating accuracy-aware sensing data selection. We formulate an optimization problem for joint sensing data selection, subtask placement and resource allocation among multiple object classification subtasks, to minimize the total resource cost while satisfying the delay and accuracy requirements. A genetic algorithm based iterative solution is proposed for the optimization problem. Simulation results demonstrate the accuracy awareness and resource efficiency achieved by the proposed cooperative sensing and computing scheme, in comparison with benchmark solutions. △ Less

Submitted 24 March, 2024; originally announced March 2024.

Digital Twin Assisted Intelligent Network Management for Vehicular Applications

Authors: Kaige Qu, Weihua Zhuang

Abstract: The emerging data-driven methods based on artificial intelligence (AI) have paved the way for intelligent, flexible, and adaptive network management in vehicular applications. To enhance network management towards network automation, this article presents a digital twin (DT) assisted two-tier learning framework, which facilitates the automated life-cycle management of machine learning based intell… ▽ More The emerging data-driven methods based on artificial intelligence (AI) have paved the way for intelligent, flexible, and adaptive network management in vehicular applications. To enhance network management towards network automation, this article presents a digital twin (DT) assisted two-tier learning framework, which facilitates the automated life-cycle management of machine learning based intelligent network management functions (INMFs). Specifically, at a high tier, meta learning is employed to capture different levels of general features for the INMFs under nonstationary network conditions. At a low tier, individual learning models are customized for local networks based on fast model adaptation. Hierarchical DTs are deployed at the edge and cloud servers to assist the two-tier learning process, through closed-loop interactions with the physical network domain. Finally, a case study demonstrates the fast and accurate model adaptation ability of meta learning in comparison with benchmark schemes. △ Less

Submitted 24 March, 2024; originally announced March 2024.

Creating pair plasmas with observable collective effects

Authors: Kenan Qu, Sebastian Meuren, Nathaniel J. Fisch

Abstract: Although existing technology cannot yet directly produce fields at the Schwinger level, experimental facilities can already explore strong-field QED phenomena by taking advantage of the Lorentz boost of energetic electron beams. Recent studies show that QED cascades can create electron-positron pairs at sufficiently high density to exhibit collective plasma effects. Signatures of the collective pa… ▽ More Although existing technology cannot yet directly produce fields at the Schwinger level, experimental facilities can already explore strong-field QED phenomena by taking advantage of the Lorentz boost of energetic electron beams. Recent studies show that QED cascades can create electron-positron pairs at sufficiently high density to exhibit collective plasma effects. Signatures of the collective pair plasma effects can appear in exquisite detail through plasma-induced frequency upshifts and chirps in the laser spectrum. Maximizing the magnitude of the QED plasma signature demands high pair density and low pair energy, which suits the configuration of colliding an over $10^{18}{Jm^{-3}}$ energy-density electron beam with a $10^{22}\mathrm{-}10^{23}{Wcm^{-2}}$ intensity laser pulse. The collision creates pairs that have a large plasma frequency, made even larger as they slow down or reverse direction due to both the radiation reaction and laser pressure. This paper explains at a tutorial level the key properties of the QED cascades and laser frequency upshift, and at the same time finds the minimum parameters that can be used to produce observable QED plasma. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 10 pages, 3 figures

Journal ref: Plasma Phys. Control. Fusion 65 034007 (2023)

Model-Assisted Learning for Adaptive Cooperative Perception of Connected Autonomous Vehicles

Authors: Kaige Qu, Weihua Zhuang, Qiang Ye, Wen Wu, Xuemin Shen

Abstract: Cooperative perception (CP) is a key technology to facilitate consistent and accurate situational awareness for connected and autonomous vehicles (CAVs). To tackle the network resource inefficiency issue in traditional broadcast-based CP, unicast-based CP has been proposed to associate CAV pairs for cooperative perception via vehicle-to-vehicle transmission. In this paper, we investigate unicast-b… ▽ More Cooperative perception (CP) is a key technology to facilitate consistent and accurate situational awareness for connected and autonomous vehicles (CAVs). To tackle the network resource inefficiency issue in traditional broadcast-based CP, unicast-based CP has been proposed to associate CAV pairs for cooperative perception via vehicle-to-vehicle transmission. In this paper, we investigate unicast-based CP among CAV pairs. With the consideration of dynamic perception workloads and channel conditions due to vehicle mobility and dynamic radio resource availability, we propose an adaptive cooperative perception scheme for CAV pairs in a mixed-traffic autonomous driving scenario with both CAVs and human-driven vehicles. We aim to determine when to switch between cooperative perception and stand-alone perception for each CAV pair, and allocate communication and computing resources to cooperative CAV pairs for maximizing the computing efficiency gain under perception task delay requirements. A model-assisted multi-agent reinforcement learning (MARL) solution is developed, which integrates MARL for an adaptive CAV cooperation decision and an optimization model for communication and computing resource allocation. Simulation results demonstrate the effectiveness of the proposed scheme in achieving high computing efficiency gain, as compared with benchmark schemes. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: Accepted by IEEE Transactions on Wireless Communications

A Hybrid Neural Network Model For Predicting The Nitrate Concentration In The Recirculating Aquaculture System

Authors: Xiangyu Fan, Jiaxin Lia, Yingzhe Wang, Yingsha Qu, Hao Li, Keming Qu, Zhengguo Cui

Abstract: This study was groundbreaking in its application of neural network models for nitrate management in the Recirculating Aquaculture System (RAS). A hybrid neural network model was proposed, which accurately predicted daily nitrate concentration and its trends using six water quality parameters. We conducted a 105-day aquaculture experiment, during which we collected 450 samples from five sets of RAS… ▽ More This study was groundbreaking in its application of neural network models for nitrate management in the Recirculating Aquaculture System (RAS). A hybrid neural network model was proposed, which accurately predicted daily nitrate concentration and its trends using six water quality parameters. We conducted a 105-day aquaculture experiment, during which we collected 450 samples from five sets of RAS to train our model (C-L-A model) which incorporates Convolutional Neural Network (CNN), Long Short-Term Memory (LSTM), and self-Attention. Furthermore, we obtained 90 samples from a standalone RAS as the testing data to evaluate the performance of the model in practical applications. The experimental results proved that the C-L-A model accurately predicted nitrate concentration in RAS and maintained good performance even with a reduced proportion of training data. We recommend using water quality parameters from the past 7 days to forecast future nitrate concentration, as this timeframe allows the model to achieve maximum generalization capability. Additionally, we compared the performance of the C-L-A model with three basic neural network models (CNN, LSTM, self-Attention) as well as three hybrid neural network models (CNN-LSTM, CNN-Attention, LSTM-Attention). The results demonstrated that the C-L-A model (R2=0.956) significantly outperformed the other neural network models (R2=0.901-0.927). Our study suggests that the utilization of neural network models, specifically the C-L-A model, could potentially assist the RAS industry in conserving resources for daily nitrate monitoring. △ Less

Submitted 15 January, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Comments: The content of this paper needs to be further filled and improved

On parallel laser beam merger in plasmas

Authors: K. V. Lezhnin, Kenan Qu, N. J. Fisch, S. V. Bulanov

Abstract: Self-focusing instability is a well-known phenomenon of nonlinear optics, which is of great importance in the field of laser-plasma interactions. Self-focusing instability leads to beam focusing and, consequently, breakup into multiple laser filaments. The majority of applications tend to avoid the laser filamentation regime due to its detrimental role on laser spot profile and peak intensity. In… ▽ More Self-focusing instability is a well-known phenomenon of nonlinear optics, which is of great importance in the field of laser-plasma interactions. Self-focusing instability leads to beam focusing and, consequently, breakup into multiple laser filaments. The majority of applications tend to avoid the laser filamentation regime due to its detrimental role on laser spot profile and peak intensity. In our work, using nonlinear Schrödinger equation solver and particle-in-cell simulations, we address the problem of interaction of multiple parallel beams in plasmas. We consider both non-relativistic and moderately relativistic regimes, and demonstrate how the physics of parallel beam interaction transitions from the familiar self- and mutual-focusing instabilities in the non-relativistic regime to moderately relativistic regime, where an analytical description of filament interaction is impenetrable. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 9 pages, 7 figures

Journal ref: Physics of Plasmas, 31, 032114, 2024

Radiation Reaction Kinetics and Collective QED Signatures

Authors: Alec Griffith, Kenan Qu, Nathaniel J. Fisch

Abstract: Observing collective effects originating from the interplay between quantum electrodynamics and plasma physics might be achieved in upcoming experiments. In particular, the generation of electron-positron pairs and the observation of their collective dynamics could be simultaneously achieved in a collision between an intense laser and a highly relativistic electron beam through a laser frequency s… ▽ More Observing collective effects originating from the interplay between quantum electrodynamics and plasma physics might be achieved in upcoming experiments. In particular, the generation of electron-positron pairs and the observation of their collective dynamics could be simultaneously achieved in a collision between an intense laser and a highly relativistic electron beam through a laser frequency shift driven by an increase in the plasma density increase. In this collision, the radiation of high energy photons will serve a dual purpose: first, in seeding the cascade of pair generation; and, second, in decelerating the created pairs for detection. The deceleration results in a detectable shift in the plasma frequency. This deceleration was previously studied considering only a small sample of individual pair particles. However, the highly stochastic nature of the quantum radiation reaction in the strong field regime limits the descriptive power of the average behavior to the dynamics of pair particles. Here, we examine the full kinetic evolution of generated pairs in order to more accurately model the relativistically adjusted plasma density. As we show, the most effective pair energy for creating observable signatures occurs at a local minimum, obtained at finite laser field strength due to the tradeoff between pair deceleration and the relativistic particle oscillation at increasing laser intensity. For a small number of laser cycles, the quantum radiation reaction may re-arrange the generated pairs into anisotropic distributions in momentum space, although, in the one dimensional simulations considered here, this anisotropy quickly decreases. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Simulations of Non-Integer Upconversion in Resonant Six-Wave Scattering

Authors: Alec Griffith, Kenan Qu, Nathaniel J. Fisch

Abstract: Resonant upconversion through a sixth order relativistic nonlinearity resulting in a unique resonance was recently proposed [V. M. Malkin and N. J. Fisch, Physical Review E 108, 045208 (2023)]. The high order resonance is a unique non-integer multiple of a driving pump frequency resulting in a frequency upshift by a factor of $\approx 3.73$. We demonstrate the presence, unique requirements, and gr… ▽ More Resonant upconversion through a sixth order relativistic nonlinearity resulting in a unique resonance was recently proposed [V. M. Malkin and N. J. Fisch, Physical Review E 108, 045208 (2023)]. The high order resonance is a unique non-integer multiple of a driving pump frequency resulting in a frequency upshift by a factor of $\approx 3.73$. We demonstrate the presence, unique requirements, and growth of this mode numerically. Through tuning waves to high amplitude, in a mildly underdense plasma, the six-photon process may grow more than other non-resonant, but lower order processes. The growth of the high frequency mode remains below the nonlinear growth regime. However, extending current numerical results to more strongly coupled resonances with longer pulse propagation distances suggests a pathway to significant upconversion. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Pair filamentation and laser scattering in beam-driven QED cascades

Authors: Kenan Qu, Alec Griffith, Nathaniel J. Fisch

Abstract: We report the observation of longitudinal filamentation of an electron-positron pair plasma in a beam-driven QED cascade. The filaments are created in the "pair-reflection" regime, where the generated pairs are partially stopped and reflected in the strong laser field. The density filaments form near the center of the laser pulse and have diameters similar to the laser wavelength. They develop and… ▽ More We report the observation of longitudinal filamentation of an electron-positron pair plasma in a beam-driven QED cascade. The filaments are created in the "pair-reflection" regime, where the generated pairs are partially stopped and reflected in the strong laser field. The density filaments form near the center of the laser pulse and have diameters similar to the laser wavelength. They develop and saturate within a few laser cycles and do not induce sizable magnetostatic fields. We rule out the onset of two-stream instability or Weibel instability and attribute the origin of pair filamentation to laser ponderomotive forces. The small plasma filaments induce strong scattering of laser energy to large angles, serving as a signature of collective QED plasma dynamics. △ Less

Submitted 12 February, 2024; v1 submitted 4 December, 2023; originally announced December 2023.

Comments: 9 pages, 9 figures

Digital Twin-Based User-Centric Edge Continual Learning in Integrated Sensing and Communication

Authors: Shisheng Hu, Jie Gao, Xinyu Huang, Mushu Li, Kaige Qu, Conghao Zhou, Xuemin, Shen

Abstract: In this paper, we propose a digital twin (DT)-based user-centric approach for processing sensing data in an integrated sensing and communication (ISAC) system with high accuracy and efficient resource utilization. The considered scenario involves an ISAC device with a lightweight deep neural network (DNN) and a mobile edge computing (MEC) server with a large DNN. After collecting sensing data, the… ▽ More In this paper, we propose a digital twin (DT)-based user-centric approach for processing sensing data in an integrated sensing and communication (ISAC) system with high accuracy and efficient resource utilization. The considered scenario involves an ISAC device with a lightweight deep neural network (DNN) and a mobile edge computing (MEC) server with a large DNN. After collecting sensing data, the ISAC device either processes the data locally or uploads them to the server for higher-accuracy data processing. To cope with data drifts, the server updates the lightweight DNN when necessary, referred to as continual learning. Our objective is to minimize the long-term average computation cost of the MEC server by optimizing two decisions, i.e., sensing data offloading and sensing data selection for the DNN update. A DT of the ISAC device is constructed to predict the impact of potential decisions on the long-term computation cost of the server, based on which the decisions are made with closed-form formulas. Experiments on executing DNN-based human motion recognition tasks are conducted to demonstrate the outstanding performance of the proposed DT-based approach in computation cost minimization. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: submitted to IEEE ICC 2024

Electric quadrupole second harmonic generation revealing dual magnetic orders in a magnetic Weyl semimetal

Authors: Youngjun Ahn, Xiaoyu Guo, Rui Xue, Kejian Qu, Kai Sun, David Mandrus, Liuyan Zhao

Abstract: Broken symmetries and electronic topology are nicely manifested together in the second order nonlinear optical responses from topologically nontrivial materials. While second order nonlinear optical effects from the electric dipole (ED) contribution have been extensively explored in polar Weyl semimetals (WSMs) with broken spatial inversion (SI) symmetry, they are rarely studied in centrosymmetric… ▽ More Broken symmetries and electronic topology are nicely manifested together in the second order nonlinear optical responses from topologically nontrivial materials. While second order nonlinear optical effects from the electric dipole (ED) contribution have been extensively explored in polar Weyl semimetals (WSMs) with broken spatial inversion (SI) symmetry, they are rarely studied in centrosymmetric magnetic WSMs with broken time reversal (TR) symmetry due to complete suppression of the ED contribution. Here, we report experimental demonstration of optical second harmonic generation (SHG) in a magnetic WSM Co$_{3}$Sn$_{2}$S$_{2}$ from the electric quadrupole (EQ) contribution. By tracking the temperature dependence of the rotation anisotropy (RA) of SHG, we capture two magnetic phase transitions, with both the SHG intensity increasing and its RA pattern rotating at $T_{C,1}$=175K and $T_{C,2}$=120K subsequently. The fitted critical exponents for the SHG intensity and RA orientation near $T_{C,1}$ and $T_{C,2}$ suggest that the magnetic phase at $T_{C,1}$ is a 3D Ising-type out-of-plane ferromagnetism while the other at $T_{C,2}$ is a 3D XY-type all-in-all-out in-plane antiferromagnetism. Our results show the success of detection and exploration of EQ SHG in a centrosymmetric magnetic WSM, and hence open the pathway towards the future investigation of its tie to the band topology. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 19 pages, 4 figures

Green Holographic MIMO Communications With A Few Transmit Radio Frequency Chains

Authors: Shuaishuai Guo, Jia Ye, Kaiqian Qu, Shu** Dang

Abstract: Holographic multiple-input multiple-output (MIMO) communications are widely recognized as a promising candidate for the next-generation air interface. With holographic MIMO surface, the number of the spatial degrees-of-freedom (DoFs) considerably increases and also significantly varies as the user moves. To fully employ the large and varying number of spatial DoFs, the number of equipped RF chains… ▽ More Holographic multiple-input multiple-output (MIMO) communications are widely recognized as a promising candidate for the next-generation air interface. With holographic MIMO surface, the number of the spatial degrees-of-freedom (DoFs) considerably increases and also significantly varies as the user moves. To fully employ the large and varying number of spatial DoFs, the number of equipped RF chains has to be larger than or equal to the largest number of spatial DoFs. However, this causes much waste as radio frequency (RF) chains (especially the transmit RF chains) are costly and power-hungry. To avoid the heavy burden, this paper investigates green holographic MIMO communications with a few transmit RF chains under an electromagnetic-based communication model. We not only look at the fundamental capacity limits but also propose an effective transmission, namely non-uniform holographic pattern modulation (NUHPM), to achieve the capacity limit in the high signal-to-noise (SNR) regime. The analytical result sheds light on the green evaluation of MIMO communications, which can be realized by increasing the size of the antenna aperture without increasing the number of transmit RF chains. Numerical results are provided to verify our analysis and to show the great performance gain by employing the additional spatial DoFs as modulation resources. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Comments: 10 figures; has been accepted by TGCN

Disorder and diffuse scattering in single-chirality (TaSe$_4$)$_2$I crystals

Authors: Jacob A. Christensen, Simon Bettler, Kejian Qu, Jeffrey Huang, Soyeun Kim, Yinchuan Lu, Chengxi Zhao, ** Chen, Matthew J. Krogstad, Toby J. Woods, Fahad Mahmood, Pinshane Y. Huang, Peter Abbamonte, Daniel P. Shoemaker

Abstract: The quasi-one-dimensional chiral compound (TaSe$_4$)$_2$I has been extensively studied as a prime example of a topological Weyl semimetal. Upon crossing its phase transition temperature $T_\textrm{CDW}$ $\approx$ 263 K, (TaSe$_4$)$_2$I exhibits incommensurate charge density wave (CDW) modulations described by the well-defined propagation vector $\sim$(0.05, 0.05, 0.11), oblique to the TaSe$_4$ cha… ▽ More The quasi-one-dimensional chiral compound (TaSe$_4$)$_2$I has been extensively studied as a prime example of a topological Weyl semimetal. Upon crossing its phase transition temperature $T_\textrm{CDW}$ $\approx$ 263 K, (TaSe$_4$)$_2$I exhibits incommensurate charge density wave (CDW) modulations described by the well-defined propagation vector $\sim$(0.05, 0.05, 0.11), oblique to the TaSe$_4$ chains. Although optical and transport properties greatly depend on chirality, there is no systematic report about chiral domain size for (TaSe$_4$)$_2$I. In this study, our single-crystal scattering refinements reveal a bulk iodine deficiency, and Flack parameter measurements on multiple crystals demonstrate that separate (TaSe$_4$)$_2$I crystals have uniform handedness, supported by direct imaging and helicity dependent THz emission spectroscopy. Our single-crystal X-ray scattering and calculated diffraction patterns identify multiple diffuse features and create a real-space picture of the temperature-dependent (TaSe$_4$)$_2$I crystal structure. The short-range diffuse features are present at room temperature and decrease in intensity as the CDW modulation develops. These transverse displacements, along with electron pinning from the iodine deficiency, help explain why (TaSe$_4$)$_2$I behaves as an electronic semiconductor at temperatures above and below $T_\textrm{CDW}$, despite a metallic band structure calculated from density functional theory of the ideal structure. △ Less

Submitted 20 February, 2024; v1 submitted 18 September, 2023; originally announced September 2023.

Comments: 25 pages, 20 figures, 5 tables

Near-Field Integrated Sensing and Communication: Performance Analysis and Beamforming Design

Authors: Kaiqian Qu, Shuaishuai Guo, Nasir Saeed

Abstract: This paper explores the potential of near-field beamforming (NFBF) in integrated sensing and communication (ISAC) systems with extremely large-scale arrays (XL-arrays). The large-scale antenna arrays increase the possibility of having communication users and targets of interest in the near field of the base station (BS). The paper first establishes the models of electromagnetic (EM) near-field sph… ▽ More This paper explores the potential of near-field beamforming (NFBF) in integrated sensing and communication (ISAC) systems with extremely large-scale arrays (XL-arrays). The large-scale antenna arrays increase the possibility of having communication users and targets of interest in the near field of the base station (BS). The paper first establishes the models of electromagnetic (EM) near-field spherical waves and far-field plane waves. With the models, we analyze the near-field beam focusing ability and the far-field beam steering ability by finding the gain-loss mathematical expression caused by the far-field steering vector mismatch in the near-field case. We formulate the NFBF design problem as minimizing the weighted summation of radar and the communication beamforming errors under a total power constraint and solve this quadratically constrained quadratic programming (QCQP) problem using the least squares (LS) method. Moreover, the Cramér-Rao bound (CRB) for target parameter estimation is derived to verify the performance of NFBF. Furthermore, we also perform power minimization using convex optimization while ensuring the required communication and sensing quality-of-service (QoS). The simulation results show the influence of model mismatch on near-field ISAC and the performance gain of transmit beamforming from the additional distance dimension of near-field. △ Less

Submitted 11 August, 2023; originally announced August 2023.

Comments: under review

Privacy and Security in Ubiquitous Integrated Sensing and Communication: Threats, Challenges and Future Directions

Authors: Kaiqian Qu, Jia Ye, Xuran Li, Shuaishuai Guo

Abstract: Integrated sensing and communication (ISAC) technology is one of the featuring technologies of the next-generation communication systems. When sensing capability becomes ubiquitous, more information can be collected, which can facilitate many applications in intelligent transportation, unmanned aerial vehicle (UAV) surveillance and healthcare. However, it also faces many information privacy leakag… ▽ More Integrated sensing and communication (ISAC) technology is one of the featuring technologies of the next-generation communication systems. When sensing capability becomes ubiquitous, more information can be collected, which can facilitate many applications in intelligent transportation, unmanned aerial vehicle (UAV) surveillance and healthcare. However, it also faces many information privacy leakage and security issues. This article highlights the potential threats to privacy and security and the technical challenges to realizing private and secure ISAC. Three promising combating solutions including artificial intelligence (AI)-enabled schemes, friendly jamming and reconfigurable intelligent surface (RIS)-assisted design are provided to maintain user privacy and ensure information security. Case studies demonstrate their effectiveness. △ Less

Submitted 13 May, 2024; v1 submitted 31 July, 2023; originally announced August 2023.

Comments: to appear in IOTMAG

Near-Field Integrated Sensing and Communications: Unlocking Potentials and Sha** the Future

Authors: Kaiqian Qu, Shuaishuai Guo, Jia Ye, Nasir Saeed

Abstract: The sixth generation (6G) communication networks are featured by integrated sensing and communications (ISAC), revolutionizing base stations (BSs) and terminals. Additionally, in the unfolding 6G landscape, a pivotal physical layer technology, the Extremely Large-Scale Antenna Array (ELAA), assumes center stage. With its expansive coverage of the near-field region, ELAA's electromagnetic (EM) wave… ▽ More The sixth generation (6G) communication networks are featured by integrated sensing and communications (ISAC), revolutionizing base stations (BSs) and terminals. Additionally, in the unfolding 6G landscape, a pivotal physical layer technology, the Extremely Large-Scale Antenna Array (ELAA), assumes center stage. With its expansive coverage of the near-field region, ELAA's electromagnetic (EM) waves manifest captivating spherical wave properties. Embracing these distinctive features, communication and sensing capabilities scale unprecedented heights. Therefore, we systematically explore the prodigious potential of near-field ISAC technology. In particular, the fundamental principles of near-field are presented to unearth its benefits in both communication and sensing. Then, we delve into the technologies underpinning near-field communication and sensing, unraveling possibilities discussed in recent works. We then investigated the advantages of near-field ISAC through rigorous case simulations, showcasing the benefits of near-field ISAC and reinforcing its stature as a transformative paradigm. As we conclude, we confront the open frontiers and chart the future directions for near-field ISAC. △ Less

Submitted 5 August, 2023; v1 submitted 31 July, 2023; originally announced August 2023.

Comments: under review

Instrumental Variable Approach to Estimating Individual Causal Effects in N-of-1 Trials: Application to ISTOP Study

Authors: Kexin Qu, Christopher H. Schmid, Tao Liu

Abstract: An N-of-1 trial is a multiple crossover trial conducted in a single individual to provide evidence to directly inform personalized treatment decisions. Advancements in wearable devices greatly improved the feasibility of adopting these trials to identify optimal individual treatment plans, particularly when treatments differ among individuals and responses are highly heterogeneous. Our work was mo… ▽ More An N-of-1 trial is a multiple crossover trial conducted in a single individual to provide evidence to directly inform personalized treatment decisions. Advancements in wearable devices greatly improved the feasibility of adopting these trials to identify optimal individual treatment plans, particularly when treatments differ among individuals and responses are highly heterogeneous. Our work was motivated by the I-STOP-AFib Study, which examined the impact of different triggers on atrial fibrillation (AF) occurrence. We described a causal framework for 'N-of-1' trial using potential treatment selection paths and potential outcome paths. Two estimands of individual causal effect were defined:(a) the effect of continuous exposure, and (b) the effect of an individual observed behavior. We addressed three challenges: (a) imperfect compliance to the randomized treatment assignment; (b) binary treatments and binary outcomes which led to the 'non-collapsibility' issue of estimating odds ratios; and (c) serial inference in the longitudinal observations. We adopted the Bayesian IV approach where the study randomization was the IV as it impacted the choice of exposure of a subject but not directly the outcome. Estimations were through a system of two parametric Bayesian models to estimate the individual causal effect. Our model got around the non-collapsibility and non-consistency by modeling the confounding mechanism through latent structural models and by inferring with Bayesian posterior of functionals. Autocorrelation present in the repeated measurements was also accounted for. The simulation study showed our method largely reduced bias and greatly improved the coverage of the estimated causal effect, compared to existing methods (ITT, PP, and AT). We applied the method to I-STOP-AFib Study to estimate the individual effect of alcohol on AF occurrence. △ Less

Submitted 24 June, 2023; originally announced June 2023.

Millimeter Wave Full-Duplex Networks: MAC Design and Throughput Optimization

Authors: Shengbo Liu, Wen Wu, Liqun Fu, Kaige Qu, Qiang Ye, Weihua Zhuang, Sherman Shen

Abstract: Full-duplex (FD) technique can remarkably boost the network capacity in the millimeter wave (mmWave) bands by enabling simultaneous transmission and reception. However, due to directional transmission and large bandwidth, the throughput and fairness performance of a mmWave FD network are affected by deafness and directional hidden-node (HN) problems and severe residual self-interference (RSI). To… ▽ More Full-duplex (FD) technique can remarkably boost the network capacity in the millimeter wave (mmWave) bands by enabling simultaneous transmission and reception. However, due to directional transmission and large bandwidth, the throughput and fairness performance of a mmWave FD network are affected by deafness and directional hidden-node (HN) problems and severe residual self-interference (RSI). To address these challenges, this paper proposes a directional FD medium access control protocol, named DFDMAC to support typical directional FD transmission modes by exploiting FD to transmit control frames to reduce signaling overhead. Furthermore, a novel busy-tone mechanism is designed to avoid deafness and directional HN problems and improve the fairness of channel access. To reduce the impact of RSI on link throughput, we formulate a throughput maximization problem for different FD transmission modes and propose a power control algorithm to obtain the optimal transmit power. Simulation results show that the proposed DFDMAC can improve the network throughput and fairness by over 60% and 32%, respectively, compared with the existing MAC protocol in IEEE 802.11ay. Moreover, the proposed power control algorithm can effectively enhance the network throughput. △ Less

Submitted 30 May, 2023; originally announced May 2023.

Beamspace Modulation for Near Field Capacity Improvement in XL-MIMO Communications

Authors: Shuaishuai Guo, Kaiqian Qu

Abstract: The spatial degrees of freedom (DoFs) greatly increase in the near-field region of millimeter wave or terahertz multiple-input multiple-output communications with extremely large antenna arrays (XL-MIMO). To employ the increased spatial DoFs, a beamspace modulation (BM) strategy is introduced to the near field of XL-MIMO. BM can work with a fixed small number of RF chains. It exploits the increase… ▽ More The spatial degrees of freedom (DoFs) greatly increase in the near-field region of millimeter wave or terahertz multiple-input multiple-output communications with extremely large antenna arrays (XL-MIMO). To employ the increased spatial DoFs, a beamspace modulation (BM) strategy is introduced to the near field of XL-MIMO. BM can work with a fixed small number of RF chains. It exploits the increased spatial DoFs as modulation resources for capacity improvements. The achievable spectral efficiency and its asymptotic capacity are analyzed. Both theoretical and simulation results show that the proposed BM strategy considerably outperforms the existing benchmark that only selects the best beamspace for data transmission in terms of spectral efficiency. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Comments: 5 pages, 4 figures, accepted by IEEE Wireless Communications Letters

Cost-Effective Two-Stage Network Slicing for Edge-Cloud Orchestrated Vehicular Networks

Authors: Wen Wu, Kaige Qu, Peng Yang, Ning Zhang, Xuemin, Shen, Weihua Zhuang

Abstract: In this paper, we study a network slicing problem for edge-cloud orchestrated vehicular networks, in which the edge and cloud servers are orchestrated to process computation tasks for reducing network slicing cost while satisfying the quality of service requirements. We propose a two-stage network slicing framework, which consists of 1) network planning stage in a large timescale to perform slice… ▽ More In this paper, we study a network slicing problem for edge-cloud orchestrated vehicular networks, in which the edge and cloud servers are orchestrated to process computation tasks for reducing network slicing cost while satisfying the quality of service requirements. We propose a two-stage network slicing framework, which consists of 1) network planning stage in a large timescale to perform slice deployment, edge resource provisioning, and cloud resource provisioning, and 2) network operation stage in a small timescale to perform resource allocation and task dispatching. Particularly, we formulate the network slicing problem as a two-timescale stochastic optimization problem to minimize the network slicing cost. Since the problem is NP-hard due to coupled network planning and network operation stages, we develop a Two timescAle netWork Slicing (TAWS) algorithm by collaboratively integrating reinforcement learning (RL) and optimization methods, which can jointly make network planning and operation decisions. Specifically, by leveraging the timescale separation property of decisions, we decouple the problem into a large-timescale network planning subproblem and a small-timescale network operation subproblem. The former is solved by an RL method, and the latter is solved by an optimization method. Simulation results based on real-world vehicle traffic traces show that the TAWS can effectively reduce the network slicing cost as compared to the benchmark scheme. △ Less

Submitted 31 December, 2022; originally announced January 2023.

Comments: The paper has been accepted by IEEE ICCC 2022

Focusability in the multi-pump Raman amplification of short laser pulses

Authors: K. V. Lezhnin, K. Qu, N. J. Fisch

Abstract: Spatially combining multiple strong laser beams is a promising concept for achieving ultrahigh laser intensities. Proof-of-principle experiments have been conducted at the National Ignition Facility to report a combination of up to twenty pulses with high energy conversion efficiency. However, the combination process might damage the seed focusability due to mismatch of the seed and pump wavefront… ▽ More Spatially combining multiple strong laser beams is a promising concept for achieving ultrahigh laser intensities. Proof-of-principle experiments have been conducted at the National Ignition Facility to report a combination of up to twenty pulses with high energy conversion efficiency. However, the combination process might damage the seed focusability due to mismatch of the seed and pump wavefronts. Here, we investigate the effect of the finite pump beam size on the focusability of the seed pulse. We propose an approach to retain and even improve the seed focusability by specifically arranging multiple pump beams. The results are demonstrated by numerical solution of coupled nonlinear Schrödinger equations. △ Less

Submitted 17 December, 2022; originally announced December 2022.

Comments: 11 pages, 10 figures

Ultrafast x-ray scattering reveals composite amplitude collective mode in the Weyl charge density wave material (TaSe$_4$)$_2$I

Authors: Quynh L. Nguyen, Ryan A. Duncan, Gal Orenstein, Yi**g Huang, Viktor Krapivin, Gilberto de la Pena, Chance Ornelas-Skarin, David A. Reis, Peter Abbamonte, Simon Bettler, Matthieu Chollet, Matthias C. Hoffmann, Matthew Hurley, Soyeun Kim, Patrick S. Kirchmann, Yuya Kubota, Fahad Mahmood, Alexander Miller, Taito Osaka, Kejian Qu, Takahiro Sato, Daniel P. Shoemaker, Nicholas Sirica, Sanghoon Song, Jade Stanton , et al. (5 additional authors not shown)

Abstract: We report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe$_4$)$_2$I following photoexcitation with femtosecond infrared laser pulses. From the time-dependent diffraction signal at the CDW sidebands we identify an amplitude mode derived primarily from the transverse acoustic component of the CDW static distortion. The dynamics of this acoustic amplitu… ▽ More We report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe$_4$)$_2$I following photoexcitation with femtosecond infrared laser pulses. From the time-dependent diffraction signal at the CDW sidebands we identify an amplitude mode derived primarily from the transverse acoustic component of the CDW static distortion. The dynamics of this acoustic amplitude mode are described well by a model of a displacive excitation, which we interpret as mediated through a coupling to the optical phonon component associated with the tetramerization of the Ta chains. △ Less

Submitted 23 December, 2022; v1 submitted 31 October, 2022; originally announced October 2022.

Observation of the massive Lee-Fukuyama phason in a charge density wave insulator

Authors: Soyeun Kim, Yinchuan Lv, Xiao-Qi Sun, Chengxi Zhao, Nina Bielinski, Azel Murzabekova, Kejian Qu, Ryan A. Duncan, Quynh L. D. Nguyen, Mariano Trigo, Daniel P. Shoemaker, Barry Bradlyn, Fahad Mahmood

Abstract: The lowest-lying fundamental excitation of an incommensurate charge density wave (CDW) material is widely believed to be a massless phason -- a collective modulation of the phase of the CDW order parameter. However, as first pointed out by Lee and Fukuyama, long-range Coulomb interactions should push the phason energy up to the plasma energy of the CDW condensate, resulting in a massive phason and… ▽ More The lowest-lying fundamental excitation of an incommensurate charge density wave (CDW) material is widely believed to be a massless phason -- a collective modulation of the phase of the CDW order parameter. However, as first pointed out by Lee and Fukuyama, long-range Coulomb interactions should push the phason energy up to the plasma energy of the CDW condensate, resulting in a massive phason and a fully gapped spectrum. Whether such behavior occurs in a CDW system has been unresolved for more than four decades. Using time-domain THz emission spectroscopy, we investigate this issue in the material (TaSe$_4$)$_2$I, a classical example of a quasi-one-dimensional CDW insulator. Upon transient photoexcitation at low temperatures, we find the material strikingly emits coherent, narrow-band THz radiation. The frequency, polarization and temperature-dependence of the emitted radiation imply the existence of a phason that acquires mass by coupling to long-range Coulomb interaction. Our observations constitute the first direct evidence of the massive "Lee-Fukuyama" phason and highlight the potential applicability of fundamental collective modes of correlated materials as compact and robust sources of THz radiation. △ Less

Submitted 25 October, 2022; originally announced October 2022.

Comments: 6 pages, 4 figures. SI available on request

A new quasi-one-dimensional transition metal chalcogenide semiconductor (Nb$_4$Se$_{15}$I$_2$)I$_2$

Authors: Kejian Qu, Zachary W. Riedel, Irián Sánchez-Ramírez, Simon Bettler, Junseok Oh, Emily N. Waite, Nadya Mason, Peter Abbamonte, Fernando de Juan Sanz, Maia G. Vergniory, Daniel P. Shoemaker

Abstract: The discovery of new low-dimensional transition metal chalcogenides is contributing to the already prosperous family of these materials. In this study, needle-shaped single crystals of a new quasi-one-dimensional material (Nb$_4$Se$_{15}$I$_2$)I$_2$ were grown by chemical vapor transport, and the structure was solved by single crystal X-ray diffraction (XRD). The new structure has one-dimensional… ▽ More The discovery of new low-dimensional transition metal chalcogenides is contributing to the already prosperous family of these materials. In this study, needle-shaped single crystals of a new quasi-one-dimensional material (Nb$_4$Se$_{15}$I$_2$)I$_2$ were grown by chemical vapor transport, and the structure was solved by single crystal X-ray diffraction (XRD). The new structure has one-dimensional (Nb$_4$Se$_{15}$I$_2$)$_n$ chains along the [101] direction, with two I$^-$ ions per formula unit directly bonded to Nb$^{5+}$. The other two I$^-$ ions are loosely coordinated and intercalate between the chains. Individual chains are chiral, and stack along the $b$ axis in opposing directions, giving space group $P2_1/c$. The phase purity and crystal structure was verified by powder XRD. Density functional theory calculations show (Nb$_4$Se$_{15}$I$_2$)I$_2$ to be a semiconductor with a direct band gap of around 0.6 eV. Resistivity measurements of bulk crystals and micro-patterned devices demonstrate that (Nb$_4$Se$_{15}$I$_2$)I$_2$ has an activation energy of around 0.1 eV, and no anomaly or transition was seen upon cooling. (Nb$_4$Se$_{15}$I$_2$)I$_2$ does not undergo structural phase transformation from room temperature down to 8.2 K, based on cryogenic temperature single crystal XRD. This compound represents a well-characterized and valence-precise member of a diverse family of anisotropic transition metal chalcogenides. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Travel time reliability in transportation networks: A review of methodological developments

Authors: Zhaoqi Zang, Xiangdong Xu, Kai Qu, Ruiya Chen, Anthony Chen

Abstract: The unavoidable travel time variability in transportation networks, resulted from the widespread supply side and demand side uncertainties, makes travel time reliability (TTR) be a common and core interest of all the stakeholders in transportation systems, including planners, travelers, service providers, and managers. This common and core interest stimulates extensive studies on modeling TTR. Res… ▽ More The unavoidable travel time variability in transportation networks, resulted from the widespread supply side and demand side uncertainties, makes travel time reliability (TTR) be a common and core interest of all the stakeholders in transportation systems, including planners, travelers, service providers, and managers. This common and core interest stimulates extensive studies on modeling TTR. Researchers have developed a range of theories and models of TTR, many of which have been incorporated into transportation models, policies, and project appraisals. Adopting the network perspective, this paper aims to provide an integrated framework for reviewing the methodological developments of modeling TTR in transportation networks, including its characterization, evaluation and valuation, and traffic assignment. Specifically, the TTR characterization provides a whole picture of travel time distribution in transportation networks. TTR evaluation and TTR valuation (known as the value of reliability, VOR) simply and intuitively interpret abstract characterized TTR to be well understood by different stakeholders of transportation systems. TTR-based traffic assignment investigates the effects of TTR on the individual users travel behavior and consequently the collective network flow pattern. As the above three topics are mainly separately studied in different disciplines and research areas, the integrated framework allows us to better understand their relationships and may contribute to develo** possible combinations of TTR modeling philosophy. Also, the network perspective enables to focus on common challenges of modeling TTR, especially the uncertainty propagation from the uncertainty sources to the TTR at spatial levels including link, route, and the entire network. Some directions for future research are discussed in the era of new data environment, applications, and emerging technologies. △ Less

Submitted 2 July, 2022; v1 submitted 25 June, 2022; originally announced June 2022.

Comments: This is an extended version of the paper submitted to the TR Part C

Tuning cryogenic Jahn-Teller transition temperatures in magnetoelectric rare earth vanadates

Authors: Kejian Qu, Daniel P. Shoemaker

Abstract: Few materials undergo cooperative Jahn-Teller (JT) transitions at low temperatures, but zircon-type oxides are one class that includes DyVO$_4$, which transforms from a tetragonal to an orthorhombic structure at around 13.6 K, with a narrow transition temperature range within 0.5 K. Since many rare-earth ions can be accommodated in the structure, there should be ample routes to vary the transition… ▽ More Few materials undergo cooperative Jahn-Teller (JT) transitions at low temperatures, but zircon-type oxides are one class that includes DyVO$_4$, which transforms from a tetragonal to an orthorhombic structure at around 13.6 K, with a narrow transition temperature range within 0.5 K. Since many rare-earth ions can be accommodated in the structure, there should be ample routes to vary the transition temperature and structural effects of the transition. We have synthesized pure DyVO$_4$ and solid solutions Dy$_{1-x}$Tm$_x$VO$_4$ ($x$ = 0.05, 0.1, 0.15, 0.2, and 0.5) and Dy$_{1-y}$Pr$_y$VO$_4$ ($y$ = 0.03, 0.05, 0.1, 0.2, and 0.5), all by solution precipitation. X-ray diffraction shows a systematic peak shift and a linear change of lattice parameters with increasing substitution. We demonstrate through heat capacity measurements that both Tm$^{3+}$ and Pr$^{3+}$ substitutions cause a depression of the cooperative JT transition temperature. When the substitution level increases, the JT transition is eventually suppressed. We examine a mean-field approximation model that can explain the both the JT transition temperature shift and its eventual disappearance. The cooperative JT effect in these zircon-type oxides is known to exhibit a large magnetoelectric response, which should follow from the mean-field behavior. The structural transformation can be easily detected via diffraction and can be used as a temperature calibration in low temperature experiments. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Split Learning over Wireless Networks: Parallel Design and Resource Management

Authors: Wen Wu, Mushu Li, Kaige Qu, Conghao Zhou, Xuemin, Shen, Weihua Zhuang, Xu Li, Weisen Shi

Abstract: Split learning (SL) is a collaborative learning framework, which can train an artificial intelligence (AI) model between a device and an edge server by splitting the AI model into a device-side model and a server-side model at a cut layer. The existing SL approach conducts the training process sequentially across devices, which incurs significant training latency especially when the number of devi… ▽ More Split learning (SL) is a collaborative learning framework, which can train an artificial intelligence (AI) model between a device and an edge server by splitting the AI model into a device-side model and a server-side model at a cut layer. The existing SL approach conducts the training process sequentially across devices, which incurs significant training latency especially when the number of devices is large. In this paper, we design a novel SL scheme to reduce the training latency, named Cluster-based Parallel SL (CPSL) which conducts model training in a "first-parallel-then-sequential" manner. Specifically, the CPSL is to partition devices into several clusters, parallelly train device-side models in each cluster and aggregate them, and then sequentially train the whole AI model across clusters, thereby parallelizing the training process and reducing training latency. Furthermore, we propose a resource management algorithm to minimize the training latency of CPSL considering device heterogeneity and network dynamics in wireless networks. This is achieved by stochastically optimizing the cut layer selection, real-time device clustering, and radio spectrum allocation. The proposed two-timescale algorithm can jointly make the cut layer selection decision in a large timescale and device clustering and radio spectrum allocation decisions in a small timescale. Extensive simulation results on non-independent and identically distributed data demonstrate that the proposed solutions can greatly reduce the training latency as compared with the existing SL benchmarks, while adapting to network dynamics. △ Less

Submitted 31 December, 2022; v1 submitted 17 April, 2022; originally announced April 2022.

Comments: The paper has been accepted by IEEE Journal on Selected Areas in Communications

Finite volume based film flow and ice accretion models on aircraft wings

Authors: Tong Liu, **sheng Cai, Kun Qu, Shucheng Pan

Abstract: The thin runback water films driven by the gas flow, the pressure gradient and the gravity on the iced aircraft surface are investigated in this paper. A three-dimensional film flow model based on Finite Volume Method (FVM) and the lubrication theory is proposed to describe the flow. The depth-averaged velocity of the film is stored in Cartesian coordinates to avoid the appearance of the metric te… ▽ More The thin runback water films driven by the gas flow, the pressure gradient and the gravity on the iced aircraft surface are investigated in this paper. A three-dimensional film flow model based on Finite Volume Method (FVM) and the lubrication theory is proposed to describe the flow. The depth-averaged velocity of the film is stored in Cartesian coordinates to avoid the appearance of the metric tensors. The governing equations are discretized in the first layer structured grid cell which is selected as the grids for film flow. In order to verify this method, comparisons between numerical results and experimental results of ice shapes on NACA 0012 airfoil and GLC-305 swept wing are presented, both showing a good agreement for rime and glaze ice condition. Overall, this model shows great potential to model ice accretion reasonably under different icing conditions. Besides, the present method doesn't require analytic metric terms, and can be easily coupled to existing finite volume solvers for logically Cartesian meshes. △ Less

Submitted 17 April, 2022; originally announced April 2022.

Particle Deceleration for Collective QED Signatures

Authors: Alec Griffith, Kenan Qu, Nathaniel J. Fisch

Abstract: Frequency upshifts have been proposed as a first experimental signature of collective effects in QED cascade generated electron-positron pair plasmas. Since the high effective masses of generated pairs will reduce any frequency change, stopped pairs at minimal Lorentz factor in the lab frame were thought to be the dominant contribution to the the laser upshift. However, we demonstrate that only co… ▽ More Frequency upshifts have been proposed as a first experimental signature of collective effects in QED cascade generated electron-positron pair plasmas. Since the high effective masses of generated pairs will reduce any frequency change, stopped pairs at minimal Lorentz factor in the lab frame were thought to be the dominant contribution to the the laser upshift. However, we demonstrate that only considering stopped particles unduly neglects the contributions of particles re-accelerated in the laser propagation direction. Re-accelerated particles should, on a per particle basis, affect the laser more strongly, and over a much longer timescale. To maximize particle contributions to the laser upshift, we consider a Laguerre-Gaussian (LG) mode to better reflect generated pairs. The LG mode doesn't have an advantage in particle deceleration and re-acceleration when compared against a Gaussian beam, but the LG mode can maintain particle contributions for a longer duration, allowing for more pair density accumulation. Deceleration with a structured beam to keep pairs within the laser should create a larger upshift, thereby lowering the demands on the driving laser. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Extended critical regimes of deep neural networks

Authors: Cheng Kevin Qu, Asem Wardak, Pulin Gong

Abstract: Deep neural networks (DNNs) have been successfully applied to many real-world problems, but a complete understanding of their dynamical and computational principles is still lacking. Conventional theoretical frameworks for analysing DNNs often assume random networks with coupling weights obeying Gaussian statistics. However, non-Gaussian, heavy-tailed coupling is a ubiquitous phenomenon in DNNs. H… ▽ More Deep neural networks (DNNs) have been successfully applied to many real-world problems, but a complete understanding of their dynamical and computational principles is still lacking. Conventional theoretical frameworks for analysing DNNs often assume random networks with coupling weights obeying Gaussian statistics. However, non-Gaussian, heavy-tailed coupling is a ubiquitous phenomenon in DNNs. Here, by weaving together theories of heavy-tailed random matrices and non-equilibrium statistical physics, we develop a new type of mean field theory for DNNs which predicts that heavy-tailed weights enable the emergence of an extended critical regime without fine-tuning parameters. In this extended critical regime, DNNs exhibit rich and complex propagation dynamics across layers. We further elucidate that the extended criticality endows DNNs with profound computational advantages: balancing the contraction as well as expansion of internal neural representations and speeding up training processes, hence providing a theoretical guide for the design of efficient neural architectures. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Collective plasma effects of electron-positron pairs in beam-driven QED cascades

Authors: Kenan Qu, Sebastian Meuren, Nathaniel J. Fisch

Abstract: Understanding the interplay of strong-field QED and collective plasma effects is important for explaining extreme astrophysical environments like magnetars. It has been shown that QED pair plasmas is possible to be produced and observed by passing a relativistic electron beam through an intense laser field. This paper presents in detail multiple sets of 3D QED-PIC simulations to show the creation… ▽ More Understanding the interplay of strong-field QED and collective plasma effects is important for explaining extreme astrophysical environments like magnetars. It has been shown that QED pair plasmas is possible to be produced and observed by passing a relativistic electron beam through an intense laser field. This paper presents in detail multiple sets of 3D QED-PIC simulations to show the creation of pair plasmas in the QED cascade. The beam driven method enables a high pair particle density and also a low particle gamma factor, which both play equal rolls on exhibiting large collective plasma effects. Finite laser frequency upshift is observed with both ideal parameters (24 PW laser laser colliding with 300 GeV electron beam) and with existing technologies (3 PW laser laser colliding with 30 GeV electron beam). △ Less

Submitted 23 May, 2024; v1 submitted 24 October, 2021; originally announced October 2021.

Comments: 15 pages, 14 figures

High Order Hermite Finite Difference Method for Euler/Navier-Stokes Equations in 2D Unstructured Meshes

Authors: Zeyuan Zhou, Mei-Yuan Zhen, Kun Qu, **-Sheng Cai

Abstract: A high order finite difference method is proposed for unstructured meshes to simulate compressible inviscid/viscous flows with/without discontinuities. In this method, based on the strong form equation, the divergence of the flux on each vertex is computed directly from fluxes nearby by means of high order least-square. In order to capture discontinuities, numerical flux of high order accuracy is… ▽ More A high order finite difference method is proposed for unstructured meshes to simulate compressible inviscid/viscous flows with/without discontinuities. In this method, based on the strong form equation, the divergence of the flux on each vertex is computed directly from fluxes nearby by means of high order least-square. In order to capture discontinuities, numerical flux of high order accuracy is calculated on each edge and serves as supporting data of the least-square computation of the divergence. The high accuracy of the numerical flux depends on the high order WENO interpolation on each edge. To reduce the computing cost and complexity, a curvlinear stencil is assembled for each edge so that the economical one-dimensional WENO interpolation can be applied. With the derivatives introduced, two-dimensional Hermite interpolation on a curvilinear stencil is applied to keep the stencil compact and avoids using many supporting points. In smooth region, the Hermite least-square 2D interpolation of 5 nodes is adopted directly to achieve the fifth order accuracy. Near a discontinuity, three values obtained by means of least-square 2D interpolation of 3 nodes, are weighted to obtain one value of the second order accuracy. After obtaining the flow states on both sides of the middle point of an edge, numerical flux of high order accuracy along the edge can be calculated. For inviscid flux, analytical flux on vertices and numerical flux along edges are used to compute the divergence. While for viscous flux, only analytical viscous flux on vertices are used. The divergence of the fluxes and their derivatives on each vertex are used to update the conservative variables and their derivatives with an explicit Runger-Kutta time scheme. Several canonical numerical cases were solved to test the accuracy and the capability of shock capturing of this method. △ Less

Submitted 7 September, 2021; v1 submitted 2 September, 2021; originally announced September 2021.

Engineering of Atomic-Scale Flexoelectricity at Grain Boundaries

Authors: Mei Wu, Xiaowei Zhang, Xiaomei Li, Ke Qu, Yuanwei Sun, Bo Han, Ruixue Zhu, **gmin Zhang, Kaihui Liu, Xuedong Ba, Xinzheng Li, Peng Gao

Abstract: Flexoelectricity is a type of ubiquitous and prominent electromechanical coupling, pertaining to the response of electrical polarization to mechanical strain gradients while not restricted to the symmetry of materials. However, large elastic deformation in most solids is usually difficult to achieve and the strain gradient at minuscule is challenging to control. Here we exploit the exotic structur… ▽ More Flexoelectricity is a type of ubiquitous and prominent electromechanical coupling, pertaining to the response of electrical polarization to mechanical strain gradients while not restricted to the symmetry of materials. However, large elastic deformation in most solids is usually difficult to achieve and the strain gradient at minuscule is challenging to control. Here we exploit the exotic structural inhomogeneity of grain boundary to achieve a huge strain gradient (~ 1.2 nm-1) within 3 ~ 4 unit-cells, and thus obtain atomic-scale flexoelectric polarization up to ~ 38 μC/cm2 at a 24 LaAlO3 grain boundary. The nanoscale flexoelectricity also modifies the electrical activity of grain boundaries. Moreover, we prove that it is a general and feasible way to form large strain gradients at atomic scale by altering the misorientation angles of grain boundaries in different dielectric materials. Thus, engineering of grain boundaries provides an effective pathway to achieve tunable flexoelectricity and broadens the electromechanical functionalities of non-piezoelectric materials. △ Less

Submitted 28 July, 2021; originally announced July 2021.

Comments: 16 pages,4 figures

Dynamics of Polar Skyrmion Bubbles under Electric Fields

Authors: Ruixue Zhu, Zhexin Jiang, Xinxin Zhang, Xiangli Zhong, Congbing Tan, Mingwei Liu, Yuanwei Sun, Xiaomei Li, Ruishi Qi, Ke Qu, Zhetong Liu, Mei Wu, Mingqiang Li, Boyuan Huang, Zhi Xu, **bin Wang, Kaihui Liu, Peng Gao, Jie Wang, Jiangyu Li, Xuedong Bai

Abstract: Room-temperature polar skyrmion bubbles that are recently found in oxide superlattice, have received enormous interests for their potential applications in nanoelectronics due to the nanometer size, emergent chirality, and negative capacitance. For practical applications, the ability to controllably manipulate them by using external stimuli is prerequisite. Here, we study the dynamics of individua… ▽ More Room-temperature polar skyrmion bubbles that are recently found in oxide superlattice, have received enormous interests for their potential applications in nanoelectronics due to the nanometer size, emergent chirality, and negative capacitance. For practical applications, the ability to controllably manipulate them by using external stimuli is prerequisite. Here, we study the dynamics of individual polar skyrmion bubbles at the nanoscale by using in situ biasing in a scanning transmission electron microscope. The reversible electric field-driven phase transition between topological and trivial polar states are demonstrated. We create, erase and monitor the shrinkage and expansion of individual polar skyrmions. We find that their transition behaviors are substantially different from that of magnetic analogue. The underlying mechanism is discussed by combing with the phase-field simulations. The controllable manipulation of nanoscale polar skyrmions allows us to tune the dielectric permittivity at atomic scale and detailed knowledge of their phase transition behaviors provides fundamentals for their applications in nanoelectronics. △ Less

Submitted 28 July, 2021; originally announced July 2021.

MP3 White Paper 2021 -- Research Opportunities Enabled by Co-locating Multi-Petawatt Lasers with Dense Ultra-Relativistic Electron Beams

Authors: Sebastian Meuren, David A. Reis, Roger Blandford, Phil H. Bucksbaum, Nathaniel J. Fisch, Frederico Fiuza, Elias Gerstmayr, Siegfried Glenzer, Mark J. Hogan, Claudio Pellegrini, Michael E. Peskin, Kenan Qu, Glen White, Vitaly Yakimenko

Abstract: Novel emergent phenomena are expected to occur under conditions exceeding the QED critical electric field, where the vacuum becomes unstable to electron-positron pair production. The required intensity to reach this regime, $\sim10^{29}\,\mathrm{Wcm^{-2}}$, cannot be achieved even with the most intense lasers now being planned/constructed without a sizeable Lorentz boost provided by interactions w… ▽ More Novel emergent phenomena are expected to occur under conditions exceeding the QED critical electric field, where the vacuum becomes unstable to electron-positron pair production. The required intensity to reach this regime, $\sim10^{29}\,\mathrm{Wcm^{-2}}$, cannot be achieved even with the most intense lasers now being planned/constructed without a sizeable Lorentz boost provided by interactions with ultrarelativistic particles. Seeded laser-laser collisions may access this strong-field QED regime at laser intensities as low as $\sim10^{24}\,\mathrm{Wcm^{-2}}$. Counterpropagating e-beam--laser interactions exceed the QED critical field at still lower intensities ($\sim10^{20}\,\mathrm{Wcm^{-2}}$ at $\sim10\,\mathrm{GeV}$). Novel emergent phenomena are predicted to occur in the "QED plasma regime", where strong-field quantum and collective plasma effects play off one another. Here the electron beam density becomes a decisive factor. Thus, the challenge is not just to exceed the QED critical field, but to do so with high quality, approaching solid-density electron beams. Even though laser wakefield accelerators (LWFA) represent a very promising research field, conventional accelerators still provide orders of magnitude higher charge densities at energies $\gtrsim10\,\mathrm{GeV}$. Co-location of extremely dense and highly energetic electron beams with a multi-petawatt laser system would therefore enable seminal research opportunities in high-field physics and laboratory astrophysics. This white paper elucidates the potential scientific impact of multi-beam capabilities that combine a multi-PW optical laser, high-energy/density electron beam, and high-intensity x rays and outlines how to achieve such capabilities by co-locating a 3-10 PW laser with a state-of-the-art linear accelerator. △ Less

Submitted 24 May, 2021; originally announced May 2021.

Comments: 3 pages

Manipulation of polar vortex chirality in oxide superlattices

Authors: Pan Chen, Congbing Tan, Zhexin Jiang, Peng Gao, Yuanwei Sun, Xiaomei Li, Ruixue Zhu, Lei Liao, Xu Hou, Lifen Wang, Ke Qu, Ning Li, Xiaomin Li, Zhi Xu, Kaihui Liu, Wenlong Wang, **bin Wang, ** Ouyang, Xiangli Zhong, Jie Wang, Xuedong Bai

Abstract: Topological polar vortices that are the electric analogues of magnetic objects, present great potential in applications of future nanoelectronics due to their nanometer size, anomalous dielectric response, and chirality. To enable the functionalities, it is prerequisite to manipulate the polar states and chirality by using external stimuli. Here, we probe the evolutions of polar state and chiralit… ▽ More Topological polar vortices that are the electric analogues of magnetic objects, present great potential in applications of future nanoelectronics due to their nanometer size, anomalous dielectric response, and chirality. To enable the functionalities, it is prerequisite to manipulate the polar states and chirality by using external stimuli. Here, we probe the evolutions of polar state and chirality of polar vortices in PbTiO3/SrTiO3 superlattices under electric field by using atomically resolved in situ scanning transmission electron microscopy and phase-field simulations. We find that the adjacent clockwise and counterclockwise vortex usually have opposite chirality. The phase-field simulations suggest that the rotation reversal or axial polarization switching can lead to the chirality change. Guided by which, we experimentally validate that the vortex rotation direction can be changed by applying and subsequently removing of electric fields, offering a potential strategy to manipulate the vortex chirality. The revealed details of dynamic behavior for individual polar vortices at atomic scale and the proposed strategy for chirality manipulation provide fundamentals for future device applications. △ Less

Submitted 25 April, 2021; originally announced April 2021.

Generating optical supercontinuum and frequency comb in tenuous plasmas

Authors: Kenan Qu, Nathaniel J. Fisch

Abstract: There are several mechanisms by which the frequency spectrum of a laser broadens when it propagates at near-relativistic-intensity in tenuous plasma. Focusing on one dimensional effects, we identify two strong optical nonlinearities, namely, four-wave mixing (FWM) and forward Raman scattering (FRS), for creating octave-wide spectra. FWM dominates the interaction when the laser pulse is short and i… ▽ More There are several mechanisms by which the frequency spectrum of a laser broadens when it propagates at near-relativistic-intensity in tenuous plasma. Focusing on one dimensional effects, we identify two strong optical nonlinearities, namely, four-wave mixing (FWM) and forward Raman scattering (FRS), for creating octave-wide spectra. FWM dominates the interaction when the laser pulse is short and intense; Its combination with phase modulation produces a symmetrically broadened supercontinuum. FRS dominates when the laser pulse is long and relatively weak; It broadens the laser spectrum mainly towards lower frequencies and produces a frequency comb. The creation of the supercontinuum and frequency combs only frequency modulates, but does not compress, the laser pulse. △ Less

Submitted 21 September, 2021; v1 submitted 26 March, 2021; originally announced March 2021.

Journal ref: Matter Radiat. Extremes 6, 054402 (2021)

Design of a V-Ti-Ni alloy with superelastic nano-precipitates

Authors: J. -L. Zhang, J. L. Cann, S. B. Maisel, K. Qu, E. Plancher, H. Springer, E. Povoden-Karadeniz, P. Gao, Y. Ren, B. Grabowski, C. C. Tasan

Abstract: Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilize… ▽ More Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V45Ti30Ni25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) beta matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed △ Less

Submitted 26 March, 2021; v1 submitted 25 March, 2021; originally announced March 2021.

Journal ref: Acta Mater. 196, 710 (2020)

A Novel Finite Difference Method for Euler Equations in 2D Unstructured Meshes

Authors: Meiyuan Zhen, Kun Qu, **sheng Cai

Abstract: Finite difference method was extended to unstructured meshes to solve Euler equations. The spatial discretization is made of two steps. First, numerical fluxes are computed at the middle point of each edge with high order accuracy. In this step, a one-dimensional curvilinear stencil is assembled for each edge to perform one-dimensional fast non-uniform WENO interpolation derived in this paper, whi… ▽ More Finite difference method was extended to unstructured meshes to solve Euler equations. The spatial discretization is made of two steps. First, numerical fluxes are computed at the middle point of each edge with high order accuracy. In this step, a one-dimensional curvilinear stencil is assembled for each edge to perform one-dimensional fast non-uniform WENO interpolation derived in this paper, which is much easier and faster than multi-dimensional interpolation. The second step is to compute the divergence of fluxes at each vertex from the fluxes at nearby edges and vertices by least square approximation of multi-dimensional polynomials. The order of the WENO interpolation in the first step and the degree of the polynomial in the second step determined the order of accuracy of the spatial scheme. After that, explicit RungeKutta time discrete scheme is used to update conservative variables. Several canonical numerical cases were solved to test the accuracy, performance and the capability of shock capturing of the developed method. △ Less

Submitted 25 February, 2021; originally announced February 2021.

Modulation-Slippage Tradeoff in Resonant Four-Wave Upconversion

Authors: Alec Griffith, Kenan Qu, Nathaniel J. Fisch

Abstract: Following up on a proposal to use four-wave mixing in an underdense plasma at mildly relativistic laser intensities to produce vastly more energetic x-ray pulses [V. M. Malkin and N. J. Fisch, Phys. Rev. E, 101, 023211 (2020)], we perform the first numerical simulations in one dimension to demonstrate amplification of a short high frequency seed through four-wave mixing. We find that parasitic pro… ▽ More Following up on a proposal to use four-wave mixing in an underdense plasma at mildly relativistic laser intensities to produce vastly more energetic x-ray pulses [V. M. Malkin and N. J. Fisch, Phys. Rev. E, 101, 023211 (2020)], we perform the first numerical simulations in one dimension to demonstrate amplification of a short high frequency seed through four-wave mixing. We find that parasitic processes including phase modulation and spatial pulse slippage limit the amplification efficiency. We numerically explore the previously proposed "dual seed" configuration as a countermeasure against phase modulation. We show how this approach tends to be thwarted by longitudinal slippage. In the examples we considered, the best performance was in fact achieved through optimization of signal and pump parameters in a "single seed" configuration. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Suppression of power losses during laser pulse propagation in underdense plasma slab

Authors: K. V. Lezhnin, K. Qu, N. J. Fisch

Abstract: For current state-of-the-art terawatt lasers, the primary laser scattering mechanisms in plasma include Forward Raman Scattering (FRS), excitation of plasma waves, and the self-modulational instability (SMI). Using 2D PIC simulations, we demonstrate the dominance of the FRS in the regime with medium-to-low density plasma and non-relativistic laser fields. However, the use of multi-colored lasers w… ▽ More For current state-of-the-art terawatt lasers, the primary laser scattering mechanisms in plasma include Forward Raman Scattering (FRS), excitation of plasma waves, and the self-modulational instability (SMI). Using 2D PIC simulations, we demonstrate the dominance of the FRS in the regime with medium-to-low density plasma and non-relativistic laser fields. However, the use of multi-colored lasers with frequency detuning exceeding the plasma frequency, $Δω>ω_{\rm pe}$, suppresses the FRS. The laser power can then be transmitted efficiently. △ Less

Submitted 7 November, 2020; originally announced November 2020.

Comments: 7 pages, 7 figures

Anomalous diffusion dynamics of learning in deep neural networks

Authors: Guozhang Chen, Cheng Kevin Qu, Pulin Gong

Abstract: Learning in deep neural networks (DNNs) is implemented through minimizing a highly non-convex loss function, typically by a stochastic gradient descent (SGD) method. This learning process can effectively find good wide minima without being trapped in poor local ones. We present a novel account of how such effective deep learning emerges through the interactions of the SGD and the geometrical struc… ▽ More Learning in deep neural networks (DNNs) is implemented through minimizing a highly non-convex loss function, typically by a stochastic gradient descent (SGD) method. This learning process can effectively find good wide minima without being trapped in poor local ones. We present a novel account of how such effective deep learning emerges through the interactions of the SGD and the geometrical structure of the loss landscape. Rather than being a normal diffusion process (i.e. Brownian motion) as often assumed, we find that the SGD exhibits rich, complex dynamics when navigating through the loss landscape; initially, the SGD exhibits anomalous superdiffusion, which attenuates gradually and changes to subdiffusion at long times when the solution is reached. Such learning dynamics happen ubiquitously in different DNNs such as ResNet and VGG-like networks and are insensitive to batch size and learning rate. The anomalous superdiffusion process during the initial learning phase indicates that the motion of SGD along the loss landscape possesses intermittent, big jumps; this non-equilibrium property enables the SGD to escape from sharp local minima. By adapting the methods developed for studying energy landscapes in complex physical systems, we find that such superdiffusive learning dynamics are due to the interactions of the SGD and the fractal-like structure of the loss landscape. We further develop a simple model to demonstrate the mechanistic role of the fractal loss landscape in enabling the SGD to effectively find global minima. Our results thus reveal the effectiveness of deep learning from a novel perspective and have implications for designing efficient deep neural networks. △ Less

Submitted 25 July, 2021; v1 submitted 22 September, 2020; originally announced September 2020.

Comments: 10 pages, 8 figures, a new angle to unravel the learning dynamics of SGD in DNNs

A sufficient condition for free-stream preserving in the nonlinear conservative finite difference schemes on curvilinear grids

Authors: Hongmin Su, **sheng Cai, Kun Qu, Shucheng Pan

Abstract: In simulations of compressible flows, the conservative finite difference method (FDM) based on the nonlinear upwind schemes, e.g. WENO5, might violate free-stream preserving (FP), due to the loss of the geometric conservation law (GCL) identity when applied on the curvilinear grids. Although some techniques on FP have been proposed previously, no general rule is given for this issue. In this paper… ▽ More In simulations of compressible flows, the conservative finite difference method (FDM) based on the nonlinear upwind schemes, e.g. WENO5, might violate free-stream preserving (FP), due to the loss of the geometric conservation law (GCL) identity when applied on the curvilinear grids. Although some techniques on FP have been proposed previously, no general rule is given for this issue. In this paper, by rearranging the upwind dissipation of the nonlinear schemes as a combination of sub-stencil reconstructions (taking WENO5 as an example), it can be proved that the upwind dissipation diminishes under the uniform flow condition if the metrics yield an identical value under the same schemes with these reconstructions, making the free-stream condition be preserved. According to this sufficient condition, the novel FP metrics are constructed for WENO5 and WENO7. By this means the original forms of these WENO schemes can be kept. In addition, the accuracy of these schemes can be retained as well with a simple accuracy compensation by replacing the central part fluxes with a high-order one. Various validations indicate that the present FP schemes retain the great capability to resolve the smooth regions accurately and capture the discontinuities robustly. △ Less

Submitted 13 January, 2021; v1 submitted 8 September, 2020; originally announced September 2020.

Creating topological polar structure in a nonpolar matter

Authors: Adeel Y. Abid, Yuanwei Sun, Xu Hou, Xiangli Zhong, Congbing Tan, Ruixue Zhu, Haoyun Chen, Ke Qu, Yuehui Li, Mei Wu, **gmin Zhang, **bin Wang, Kaihui Liu, Xuedong Bai, Dapeng Yu, Jie Wang, Jiangyu Li, Peng Gao

Abstract: Nontrivial topological structures offer rich playground in condensed matter physics including fluid dynamics, superconductivity, and ferromagnetism, and they promise alternative device configurations for post-Moore spintronics and electronics. Indeed, magnetic skyrmions are actively pursued for high-density data storage, while polar vortices with exotic negative capacitance may enable ultralow pow… ▽ More Nontrivial topological structures offer rich playground in condensed matter physics including fluid dynamics, superconductivity, and ferromagnetism, and they promise alternative device configurations for post-Moore spintronics and electronics. Indeed, magnetic skyrmions are actively pursued for high-density data storage, while polar vortices with exotic negative capacitance may enable ultralow power consumption in microelectronics. Following extensive investigations on a variety of magnetic textures including vortices, domain walls and skyrmions in the past decades, studies on polar topologies have taken off in recent years, resulting in discoveries of closure domains, vortices, and skyrmions in ferroelectric materials. Nevertheless, the atomic-scale creation of topological polar structures is largely confined in a single ferroelectric system, PbTiO3 (PTO) with large polarization, casting doubt on the generality of polar topologies and limiting their potential applications. In this work, we successfully create previously unrealized atomic-scale polar antivortices in the nominally nonpolar SrTiO3 (STO), expanding the reaches of topological structures and completing an important missing link in polar topologies. The work shed considerable new insight into the formation of topological polar structures, and offers guidance in searching for new polar textures. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Superconductivity in type-II Weyl-semimetal WTe2 induced by a normal metal contact

Authors: Artem Kononov, Martin Endres, Gulibusitan Abulizi, Kejian Qu, Jiaqiang Yan, David G. Mandrus, Kenji Watanabe, Takashi Taniguchi, Christian Schönenberger

Abstract: WTe$_2$ is a material with rich topological properties: it is a 2D topological insulator as a monolayer and a Weyl-semimetal and higher-order topological insulator (HOTI) in the bulk form. Inducing superconductivity in topological materials is a way to obtain topological superconductivity, which lays at the foundation for many proposals of fault tolerant quantum computing. Here, we demonstrate the… ▽ More WTe$_2$ is a material with rich topological properties: it is a 2D topological insulator as a monolayer and a Weyl-semimetal and higher-order topological insulator (HOTI) in the bulk form. Inducing superconductivity in topological materials is a way to obtain topological superconductivity, which lays at the foundation for many proposals of fault tolerant quantum computing. Here, we demonstrate the emergence of superconductivity at the interface between WTe$_2$ and the normal metal palladium. The superconductivity has a critical temperature of about 1.2 K. By studying the superconductivity in perpendicular magnetic field, we obtain the coherence length and the London penetration depth. These parameters correspond to a low Fermi velocity and a high density of states at the Fermi level. This hints to a possible origin of superconductivity due to the formation of flat bands. Furthermore, the critical in-plane magnetic field exceeds the Pauli limit, suggesting a non-trivial nature of the superconducting state. △ Less

Submitted 23 March, 2021; v1 submitted 9 July, 2020; originally announced July 2020.

Comments: As accepted to Journal of Applied Physics, 7 pages, 4 figures

Journal ref: J. Appl. Phys. 129, 113903 (2021)