-
Fast relaxation in metallic glasses studied by measurements of the internal friction at high frequencies
Authors:
G. V. Afonin,
J. C. Qiao,
A. S. Makarov,
N. P. Kobelev,
V. A. Khonik
Abstract:
We performed high-frequency (0.4 to 1.7 MHz) measurements of the internal friction (IF) on 14 bulk metallic glasses (MGs). It is found that 12 of these MGs display relaxation IF peaks at temperatures T= 400-500 K, which are weakly affected by heat treatment within the amorphous state. The corresponding relaxation time is about 0.3 microseconds. This fast relaxation is reported for the first time i…
▽ More
We performed high-frequency (0.4 to 1.7 MHz) measurements of the internal friction (IF) on 14 bulk metallic glasses (MGs). It is found that 12 of these MGs display relaxation IF peaks at temperatures T= 400-500 K, which are weakly affected by heat treatment within the amorphous state. The corresponding relaxation time is about 0.3 microseconds. This fast relaxation is reported for the first time in the literature. The apparent activation enthalpy for 4 MGs is determined.
△ Less
Submitted 27 April, 2024;
originally announced April 2024.
-
High entropy metallic glasses, what does it mean?
Authors:
G. V. Afonin,
J. C. Qiao,
A. S. Makarov,
R. A. Konchakov,
E. V. Goncharova,
N. P. Kobelev,
V. A. Khonik
Abstract:
We performed calorimetric measurements on 30 bulk metallic glasses differing with their mixing entropies DSmix. On this basis, the excess entropies DS and excess enthalpies DH of glasses with respect to their maternal crystalline states are calculated. It is found that the excess entropy DS on the average decreases with increasing mixing entropy DSmix. This means that so-called "high-entropymetall…
▽ More
We performed calorimetric measurements on 30 bulk metallic glasses differing with their mixing entropies DSmix. On this basis, the excess entropies DS and excess enthalpies DH of glasses with respect to their maternal crystalline states are calculated. It is found that the excess entropy DS on the average decreases with increasing mixing entropy DSmix. This means that so-called "high-entropymetallic glasses" (i.e. the glasses having high DSmix) actually constitute glasses with low excess entropy DS. We predict that such glasses should have reduced relaxation ability. We also found that the excess enthalpy DH of glass linearly increases with its excess entropy DS, in line with a general thermodynamic estimate.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Relation of the thermodynamic parameter of disordering with the width of structure factor and defect concentration in a metallic glass
Authors:
G. V. Afonin,
A. S. Makarov,
R. A. Konchakov,
J. C. Qiao,
A. N. Vasiliev,
N. P. Kobelev,
V. A. Khonik
Abstract:
In this work, we show that above the glass transition there exists a strong unique interrelationship between the thermodynamic parameter of disorder of a metallic glass derived using its excess entropy, diffraction measure of disorder given by the width of the X-ray structure factor and defect concentration derived from shear modulus measurements. Below the glass transition, this relationship is m…
▽ More
In this work, we show that above the glass transition there exists a strong unique interrelationship between the thermodynamic parameter of disorder of a metallic glass derived using its excess entropy, diffraction measure of disorder given by the width of the X-ray structure factor and defect concentration derived from shear modulus measurements. Below the glass transition, this relationship is more complicated and depends on both temperature and thermal prehistory.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Effect of the entropy on the shear viscosity of metallic glasses near the glass transition
Authors:
A. S. Makarov,
J. B. Cui,
J. C. Qiao,
G. V. Afonin,
N. P. Kobelev,
V. A. Khonik
Abstract:
We measured the shear viscosity of 14 metallic glasses differing with their mixing entropy $ΔS_{mix}$. It is found that the viscosity at the glass transition temperature $T_g$ significantly increases with $ΔS_{mix}$. Using calorimetric data, we calculated the excess entropy of all glasses $ΔS$ with respect to their maternal crystalline states as a function of temperature. It is shown that the exce…
▽ More
We measured the shear viscosity of 14 metallic glasses differing with their mixing entropy $ΔS_{mix}$. It is found that the viscosity at the glass transition temperature $T_g$ significantly increases with $ΔS_{mix}$. Using calorimetric data, we calculated the excess entropy of all glasses $ΔS$ with respect to their maternal crystalline states as a function of temperature. It is shown that the excess entropy $ΔS$ both at room temperature and at $T_g$ \textit{decreases} with $ΔS_{mix}$. It is concluded that glasses with "high mixing entropy" $ΔS_{mix}$ correspond to MGs with \textit{low} excess entropy $ΔS$. The origin of the increased shear viscosity at $T_g$ of glasses with high $ΔS_{mix}$ is determined by their reduced excess entropy $ΔS$.
△ Less
Submitted 19 November, 2023;
originally announced November 2023.
-
Dimensionless parameter of structural ordering and excess entropy of metallic and tellurite glasses
Authors:
A. S. Makarov,
G. V. Afonin,
R. A. Konchakov,
V. A. Khonik,
J. C. Qiao,
A. N. Vasiliev,
N. P. Kobelev
Abstract:
Using a notion on the excess entropy of glass with respect to the counterpart crystal, we introduce a simple dimensionless order parameter $ξ$, which changes from $ξ\rightarrow 0$ to $ξ\rightarrow 1$. The former case corresponds to a strongly disordered liquid-like structure while the latter situation describes a highly ordered crystal-like glass. This approach is applied to 13 metallic and 2 tell…
▽ More
Using a notion on the excess entropy of glass with respect to the counterpart crystal, we introduce a simple dimensionless order parameter $ξ$, which changes from $ξ\rightarrow 0$ to $ξ\rightarrow 1$. The former case corresponds to a strongly disordered liquid-like structure while the latter situation describes a highly ordered crystal-like glass. This approach is applied to 13 metallic and 2 tellurite glasses. We found that $ξ$ is strongly sensitive to structural state and/or chemical composition. It can be also used for a comparison of the order in glasses belonging to different classes and appear to represent a new way of structural analysis.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Critical behavior of the fluctuation heat capacity near the glass transition of metallic glasses
Authors:
R. A. Konchakov,
A. S. Makarov,
G. V. Afonin,
J. C. Qiao,
M. G. Vasin,
N. P. Kobelev,
V. A. Khonik
Abstract:
The high-frequency shear modulus of five Zr-, Pd-, Cu-based conventional and two high-entropy bulk metallic glasses was measured in a wide temperature range up to the beginning of crystallization. Using these data and general thermodynamic relations, the "fluctuation" heat capacity $ΔC_f$ determined by local structural fluctuations in the defect regions is introduced and calculated. It is found th…
▽ More
The high-frequency shear modulus of five Zr-, Pd-, Cu-based conventional and two high-entropy bulk metallic glasses was measured in a wide temperature range up to the beginning of crystallization. Using these data and general thermodynamic relations, the "fluctuation" heat capacity $ΔC_f$ determined by local structural fluctuations in the defect regions is introduced and calculated. It is found that $ΔC_f$ temperature dependence for all metallic glasses has a large peak located slightly below or above the glass transition temperature but clearly lower than the crystallization onset temperature. The form of this peak resembles the characteristic $λ$-peak typical for order-disorder phase transitions. It is suggested that this $ΔC_f$-peak reflects certain underlying critical phenomenon. The critical temperature $T_0$ (peak temperature) and corresponding critical index $α$ are determined. Averaged over all seven metallic glasses under investigation in the initial and relaxed states, the critical index $α=0.26$. The results obtained indicate that the fluctuations of thermal energy near the glass transition bear the marks of a continuous phase transition. However, the derived critical index is between those corresponding to a second-order phase transition ($α\approx 0.1$) and a critical transition characterized by a tricritical point ($α\approx 0.5$).
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Defect-induced ordering and disordering in metallic glasses
Authors:
A. S. Makarov,
G. V. Afonin,
R. A. Konchakov,
J. C. Qiao,
A. N. Vasiliev,
N. P. Kobelev,
V. A. Khonik
Abstract:
On the basis of shear modulus measurements on a Pt-based glass, we calculated temperature dependence of the defect concentration c using the Interstitialcy theory. This temperature dependence is compared with temperature dependence of the normalized full width at half maximum (FWHM) gamma of the first peak of the structure factor S(q) for the same glass available in the literature. It is found tha…
▽ More
On the basis of shear modulus measurements on a Pt-based glass, we calculated temperature dependence of the defect concentration c using the Interstitialcy theory. This temperature dependence is compared with temperature dependence of the normalized full width at half maximum (FWHM) gamma of the first peak of the structure factor S(q) for the same glass available in the literature. It is found that above the glass transition temperature Tg linearly increases with c in the same way for both initial and relaxed (preannealed) samples providing the evidence of defect-induced disordering in the supercooled liquid region independent of glass thermal prehistory. For both states of the samples, the derivative d(gamma)/dc is close to unity. Below Tg, the interrelation between gamma and c is entirely different for initial and relaxed samples. In the former case, strong defect-induced ordering upon approaching Tg is observed while relaxed samples do not reveal any clear ordering/disordering. Possible reasons for these observations are discussed. To further investigate the relationship between the normalized FWHM and defect concentration, we performed molecular dynamic simulation of gamma(c)-dependence in a high-entropy FeNiCrCoCu model glass. It is found that gamma also linearly increases with c while the derivative d(gamma)/dc is again close to unity just as in the case of Pt-based glass.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Highly Distorted Lattices in Chemically Complex Alloys Produce Ultra-Elastic Materials with Extraordinary Elinvar Effects
Authors:
Q. F. He,
J. G. Wang,
H. A. Chen,
Z. Y. Ding,
Z. Q. Zhou,
L. H. Xiong,
J. H. Luan,
J. M. Pelletier,
J. C. Qiao,
Q. Wang,
L. L. Fan,
Y. Ren,
Q. S. Zeng,
C. T. Liu,
C. W. Pao,
D. J. Srolovitz,
Y. Yang
Abstract:
Conventional crystalline alloys usually possess a low atomic size difference in order to stabilize its crystalline structure. However, in this article, we report a single phase chemically complex alloy which possesses a large atomic size misfit usually unaffordable to conventional alloys. Consequently, this alloy develops a rather complex atomic-scale chemical order and a highly distorted crystall…
▽ More
Conventional crystalline alloys usually possess a low atomic size difference in order to stabilize its crystalline structure. However, in this article, we report a single phase chemically complex alloy which possesses a large atomic size misfit usually unaffordable to conventional alloys. Consequently, this alloy develops a rather complex atomic-scale chemical order and a highly distorted crystalline structure. As a result, this crystalline alloy displays an unusually high elastic strain limit (~2%), about ten times of that of conventional alloys, and an extremely low internal friction (< 2E-4) at room temperature. More interestingly, this alloy firmly maintains its elastic modulus even when the testing temperature rises from room temperature to 900 K, which is unmatched by the existing alloys hitherto reported. From an application viewpoint, our discovery may open up new opportunities to design high precision devices usable even under an extreme environment.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
