-
Ultra-high precision comb-locked terahertz frequency-domain spectroscopy of whispering-gallery modes
Authors:
Sebastian Müller,
Kane Hill,
Dominik Walter Vogt,
Thomas A. Puppe,
Rafal Wilk
Abstract:
We demonstrate the capabilities of a novel frequency-domain terahertz spectrometer based on a comb-locked frequency synthesizer, which provides absolute frequency calibration. The inherent stability and repeatability of the scans allow for the combination of fast data acquisition with an average time-limited signal-to-noise ratio. We demonstrate kilohertz level frequency resolution in terahertz pr…
▽ More
We demonstrate the capabilities of a novel frequency-domain terahertz spectrometer based on a comb-locked frequency synthesizer, which provides absolute frequency calibration. The inherent stability and repeatability of the scans allow for the combination of fast data acquisition with an average time-limited signal-to-noise ratio. We demonstrate kilohertz level frequency resolution in terahertz precision spectroscopy of ultrahigh quality whispering-gallery-mode resonators. Spectra covering multiple free spectral ranges (>36GHz) with sub-20kHz resolution are acquired in 5s. We analyse the coupling behaviour and temperature tuning of single resonances and, for the first time, observe minute red and blue shifts of different mode families. The experimental results are supported with finite element simulations.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
End-to-end topology for fiber comb based optical frequency transfer at the $10^{-21}$ level
Authors:
Erik Benkler,
Burghard Lipphardt,
Thomas Puppe,
Rafał Wilk,
Felix Rohde,
Uwe Sterr
Abstract:
We introduce a simple and robust scheme for optical frequency transfer of an ultra-stable source light field via an optical frequency comb to a field at a target optical frequency, where highest stability is required, e.g. for the interrogation of an optical clock. The scheme relies on a topology for end-to-end suppression of the influence of optical path-length fluctuations, which is attained by…
▽ More
We introduce a simple and robust scheme for optical frequency transfer of an ultra-stable source light field via an optical frequency comb to a field at a target optical frequency, where highest stability is required, e.g. for the interrogation of an optical clock. The scheme relies on a topology for end-to-end suppression of the influence of optical path-length fluctuations, which is attained by actively phase-stabilized delivery, combined with common-path propagation. This approach provides a robust stability improvement without the need for additional isolation against environmental disturbances such as temperature, pressure or humidity changes. We measure residual frequency transfer instabilities by comparing the frequency transfers carried out with two independent combs simultaneously. Residual fractional frequency instabilities between two systems of $8\times10^{-18}$ at 1 s and $3\times10^{-21}$ at $10^5$ s averaging time are observed. We discuss the individual noise contributions to the residual instability. The presented scheme is technically simple, robust against environmental parameter fluctuations, and enables an ultra-stable frequency transfer, e.g. to optical clock lasers or to lasers in gravitational wave detectors.
△ Less
Submitted 1 April, 2020; v1 submitted 9 October, 2019;
originally announced October 2019.
-
Measurement of the binding energy of ultracold $^{87}$Rb$^{133}$Cs molecules using an offset-free optical frequency comb
Authors:
Peter K. Molony,
Avinash Kumar,
Philip D. Gregory,
Russell Kliese,
Thomas Puppe,
C. Ruth Le Sueur,
Jesus Aldegunde,
Jeremy M. Hutson,
Simon L. Cornish
Abstract:
We report the binding energy of $^{87}$Rb$^{133}$Cs molecules in their rovibrational ground state measured using an offset-free optical frequency comb based on difference frequency generation technology. We create molecules in the absolute ground state using stimulated Raman adiabatic passage (STIRAP) with a transfer efficiency of 88\%. By measuring the absolute frequencies of our STIRAP lasers, w…
▽ More
We report the binding energy of $^{87}$Rb$^{133}$Cs molecules in their rovibrational ground state measured using an offset-free optical frequency comb based on difference frequency generation technology. We create molecules in the absolute ground state using stimulated Raman adiabatic passage (STIRAP) with a transfer efficiency of 88\%. By measuring the absolute frequencies of our STIRAP lasers, we find the energy-level difference from an initial weakly-bound Feshbach state to the rovibrational ground state with a resolution of 5 kHz over an energy-level difference of more than 114 THz; this lets us discern the hyperfine splitting of the ground state. Combined with theoretical models of the Feshbach state binding energies and ground-state hyperfine structure, we determine a zero-field binding energy of $h\times114\,268\,135\,237(5)(50)$ kHz. To our knowledge, this is the most accurate determination to date of the dissociation energy of a molecule.
△ Less
Submitted 27 May, 2016;
originally announced May 2016.
-
Difference-frequency combs in cold atom physics
Authors:
Russell Kliese,
Nazanin Hoghooghi,
Thomas Puppe,
Felix Rohde,
Alexander Sell,
Armin Zach,
Patrick Leisching,
Wilhelm Kaenders,
Niamh C. Keegan,
Alistair D. Bounds,
Elizabeth M. Bridge,
Jack Leonard,
Charles S. Adams,
Simon L. Cornish,
Matthew P. A. Jones
Abstract:
Optical frequency combs provide the clockwork to relate optical frequencies to radio frequencies. Hence, combs allow to measure optical frequencies with respect to a radio frequency where the accuracy is limited only by the reference signal. In order to provide a stable link between the radio and optical frequencies, the two parameters of the frequency comb must be fixed: the carrier envelope offs…
▽ More
Optical frequency combs provide the clockwork to relate optical frequencies to radio frequencies. Hence, combs allow to measure optical frequencies with respect to a radio frequency where the accuracy is limited only by the reference signal. In order to provide a stable link between the radio and optical frequencies, the two parameters of the frequency comb must be fixed: the carrier envelope offset frequency $f_{\rm ceo}$ and the pulse repetition-rate $f_{\rm rep}$. We have developed the first optical frequency comb based on difference frequency generation (DFG) that eliminates $f_{\rm ceo}$ by design - specifically tailored for applications in cold atom physics. An $f_{\rm ceo}$-free spectrum at 1550 nm is generated from a super continuum spanning more than an optical octave. Established amplification and frequency conversion techniques based on reliable telecom fiber technology allow generation of multiple wavelength outputs. In this paper we discuss the frequency comb design, characterization, and optical frequency measurement of Sr Rydberg states. The DFG technique allows for a compact and robust, passively $f_{\rm ceo}$ stable frequency comb significantly improving reliability in practical applications.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Phase-predictable tuning of single-frequency optical synthesizers
Authors:
Felix Rohde,
Erik Benkler,
Thomas Puppe,
Reinhard Unterreitmayer,
Armin Zach,
Harald R Telle
Abstract:
We investigate the tuning behavior of a novel type of single-frequency optical synthesizers by phase comparison of the output signals of two identical devices. We achieve phase-stable and cycle slip free frequency tuning over 28.1 GHz with a maximum zero-to-peak phase deviation of 62 mrad. In contrast to previous implementations of single-frequency optical synthesizers, no comb line order switchin…
▽ More
We investigate the tuning behavior of a novel type of single-frequency optical synthesizers by phase comparison of the output signals of two identical devices. We achieve phase-stable and cycle slip free frequency tuning over 28.1 GHz with a maximum zero-to-peak phase deviation of 62 mrad. In contrast to previous implementations of single-frequency optical synthesizers, no comb line order switching is needed when tuned over more than one comb line spacing range of the employed frequency comb.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
-
Nonlinear spectroscopy of photons bound to one atom
Authors:
I. Schuster,
A. Kubanek,
A. Fuhrmanek,
T. Puppe,
P. W. H. Pinkse,
K. Murr,
G. Rempe
Abstract:
Optical nonlinearities typically require macroscopic media, thereby making their implementation at the quantum level an outstanding challenge. Here we demonstrate a nonlinearity for one atom enclosed by two highly reflecting mirrors. We send laser light through the input mirror and record the light from the output mirror of the cavity. For weak laser intensity, we find the vacuum-Rabi resonances…
▽ More
Optical nonlinearities typically require macroscopic media, thereby making their implementation at the quantum level an outstanding challenge. Here we demonstrate a nonlinearity for one atom enclosed by two highly reflecting mirrors. We send laser light through the input mirror and record the light from the output mirror of the cavity. For weak laser intensity, we find the vacuum-Rabi resonances. But for higher intensities, we find an additional resonance. It originates from the fact that the cavity can accommodate only an integer number of photons and that this photon number determines the characteristic frequencies of the coupled atom-cavity system. We selectively excite such a frequency by depositing at once two photons into the system and find a transmission which increases with the laser intensity squared. The nonlinearity differs from classical saturation nonlinearities and is direct spectroscopic proof of the quantum nature of the atom-cavity system. It provides a photon-photon interaction by means of one atom, and constitutes a step towards a two-photon gateway or a single-photon transistor.
△ Less
Submitted 19 March, 2008;
originally announced March 2008.
-
Trap** and observing single atoms in the dark
Authors:
T. Puppe,
I. Schuster,
A. Grothe,
A. Kubanek,
K. Murr,
P. W. H. Pinkse,
G. Rempe
Abstract:
A single atom strongly coupled to a cavity mode is stored by three-dimensional confinement in blue-detuned cavity modes of different longitudinal and transverse order. The vanishing light intensity at the trap center reduces the light shift of all atomic energy levels. This is exploited to detect a single atom by means of a dispersive measurement with 95% confidence in 0.010 ms, limited by the p…
▽ More
A single atom strongly coupled to a cavity mode is stored by three-dimensional confinement in blue-detuned cavity modes of different longitudinal and transverse order. The vanishing light intensity at the trap center reduces the light shift of all atomic energy levels. This is exploited to detect a single atom by means of a dispersive measurement with 95% confidence in 0.010 ms, limited by the photon-detection efficiency. As the atom switches resonant cavity transmission into cavity reflection, the atom can be detected while scattering about one photon.
△ Less
Submitted 17 April, 2007; v1 submitted 15 February, 2007;
originally announced February 2007.
-
Light force fluctuations in a strongly coupled atom-cavity system
Authors:
T. Puppe,
I. Schuster,
P. Maunz,
K. Murr,
P. W. H. Pinkse,
G. Rempe
Abstract:
Between mirrors, the density of electromagnetic modes differs from the one in free space. This changes the radiation properties of an atom as well as the light forces acting on an atom. It has profound consequences in the strong-coupling regime of cavity quantum electrodynamics. For a single atom trapped inside the cavity, we investigate the atom-cavity system by scanning the frequency of a prob…
▽ More
Between mirrors, the density of electromagnetic modes differs from the one in free space. This changes the radiation properties of an atom as well as the light forces acting on an atom. It has profound consequences in the strong-coupling regime of cavity quantum electrodynamics. For a single atom trapped inside the cavity, we investigate the atom-cavity system by scanning the frequency of a probe laser for various atom-cavity detunings. The avoided crossing between atom and cavity resonance is visible in the transmission of the cavity. It is also visible in the loss rate of the atom from the intracavity dipole trap. On the normal-mode resonances, the dominant contribution to the loss rate originates from dipole-force fluctuations which are dramatically enhanced in the cavity. This conclusion is supported by Monte-Carlo simulations.
△ Less
Submitted 9 February, 2007;
originally announced February 2007.
-
Momentum diffusion for coupled atom-cavity oscillators
Authors:
K. Murr,
P. Maunz,
P. W. H. Pinkse,
T. Puppe,
I. Schuster,
D. Vitali,
G. Rempe
Abstract:
It is shown that the momentum diffusion of free-space laser cooling has a natural correspondence in optical cavities when the internal state of the atom is treated as a harmonic oscillator. We derive a general expression for the momentum diffusion which is valid for most configurations of interest: The atom or the cavity or both can be probed by lasers, with or without the presence of traps indu…
▽ More
It is shown that the momentum diffusion of free-space laser cooling has a natural correspondence in optical cavities when the internal state of the atom is treated as a harmonic oscillator. We derive a general expression for the momentum diffusion which is valid for most configurations of interest: The atom or the cavity or both can be probed by lasers, with or without the presence of traps inducing local atomic frequency shifts. It is shown that, albeit the (possibly strong) coupling between atom and cavity, it is sufficient for deriving the momentum diffusion to consider that the atom couples to a mean cavity field, which gives a first contribution, and that the cavity mode couples to a mean atomic dipole, giving a second contribution. Both contributions have an intuitive form and present a clear symmetry. The total diffusion is the sum of these two contributions plus the diffusion originating from the fluctuations of the forces due to the coupling to the vacuum modes other than the cavity mode (the so called spontaneous emission term). Examples are given that help to evaluate the heating rates induced by an optical cavity for experiments operating at low atomic saturation. We also point out intriguing situations where the atom is heated although it cannot scatter light.
△ Less
Submitted 6 July, 2006; v1 submitted 30 November, 2005;
originally announced December 2005.
-
Normal-mode spectroscopy of a single bound atom-cavity system
Authors:
P. Maunz,
T. Puppe,
I. Schuster,
N. Syassen,
P. W. H. Pinkse,
G. Rempe
Abstract:
The energy-level structure of a single atom strongly coupled to the mode of a high-finesse optical cavity is investigated. The atom is stored in an intracavity dipole trap and cavity cooling is used to compensate for inevitable heating. Two well-resolved normal modes are observed both in the cavity transmission and the trap lifetime. The experiment is in good agreement with a Monte Carlo simulat…
▽ More
The energy-level structure of a single atom strongly coupled to the mode of a high-finesse optical cavity is investigated. The atom is stored in an intracavity dipole trap and cavity cooling is used to compensate for inevitable heating. Two well-resolved normal modes are observed both in the cavity transmission and the trap lifetime. The experiment is in good agreement with a Monte Carlo simulation, demonstrating our ability to localize the atom to within $λ/10$ at a cavity antinode.
△ Less
Submitted 5 October, 2004; v1 submitted 18 June, 2004;
originally announced June 2004.
-
Cavity cooling of a single atom
Authors:
P. Maunz,
T. Puppe,
I. Schuster,
N. Syassen,
P. W. H. Pinkse,
G. Rempe
Abstract:
All conventional methods to laser-cool atoms rely on repeated cycles of optical pum** and spontaneous emission of a photon by the atom. Spontaneous emission in a random direction is the dissipative mechanism required to remove entropy from the atom. However, alternative cooling methods have been proposed for a single atom strongly coupled to a high-finesse cavity; the role of spontaneous emiss…
▽ More
All conventional methods to laser-cool atoms rely on repeated cycles of optical pum** and spontaneous emission of a photon by the atom. Spontaneous emission in a random direction is the dissipative mechanism required to remove entropy from the atom. However, alternative cooling methods have been proposed for a single atom strongly coupled to a high-finesse cavity; the role of spontaneous emission is replaced by the escape of a photon from the cavity. Application of such cooling schemes would improve the performance of atom cavity systems for quantum information processing. Furthermore, as cavity cooling does not rely on spontaneous emission, it can be applied to systems that cannot be laser-cooled by conventional methods; these include molecules (which do not have a closed transition) and collective excitations of Bose condensates, which are destroyed by randomly directed recoil kicks. Here we demonstrate cavity cooling of single rubidium atoms stored in an intracavity dipole trap. The cooling mechanism results in extended storage times and improved localization of atoms. We estimate that the observed cooling rate is at least five times larger than that produced by free-space cooling methods, for comparable excitation of the atom.
△ Less
Submitted 3 March, 2004;
originally announced March 2004.
-
Single-atom trajectories in higher-order transverse modes of a high-finesse optical cavity
Authors:
T. Puppe,
P. Maunz,
T. Fischer,
P. W. H. Pinkse,
G. Rempe
Abstract:
Transits of single atoms through higher-order Hermite-Gaussian transverse modes of a high-finesse optical cavity are observed. Compared to the fundamental Gaussian mode, the use of higher-order modes increases the information on the atomic position. The experiment is a first experimental step towards the realisation of an atomic kaleidoscope.
Transits of single atoms through higher-order Hermite-Gaussian transverse modes of a high-finesse optical cavity are observed. Compared to the fundamental Gaussian mode, the use of higher-order modes increases the information on the atomic position. The experiment is a first experimental step towards the realisation of an atomic kaleidoscope.
△ Less
Submitted 13 October, 2003;
originally announced October 2003.
-
An optical kaleidoscope using a single atom
Authors:
P. Horak,
H. Ritsch,
T. Fischer,
P. Maunz,
T. Puppe,
P. W. H. Pinkse,
G. Rempe
Abstract:
A new method to track the motion of a single particle in the field of a high-finesse optical resonator is described. It exploits near-degenerate higher-order Gaussian cavity modes, whose symmetry is broken by the phase shift on the light induced by the particle. Observation of the spatial intensity distribution behind the cavity allows direct determination of the particle's position with approxi…
▽ More
A new method to track the motion of a single particle in the field of a high-finesse optical resonator is described. It exploits near-degenerate higher-order Gaussian cavity modes, whose symmetry is broken by the phase shift on the light induced by the particle. Observation of the spatial intensity distribution behind the cavity allows direct determination of the particle's position with approximately wavelength accuracy. This is demonstrated by generating a realistic atomic trajectory using a semiclassical simulation including friction and diffusion and comparing it to the reconstructed path. The path reconstruction itself requires no knowledge about the forces on the particle.
△ Less
Submitted 11 May, 2001;
originally announced May 2001.
