Showing 1–14 of 14 results for author: Puig, T

RADES axion search results with a High-Temperature Superconducting cavity in an 11.7 T magnet

Authors: S. Ahyoune, A. Álvarez Melcón, S. Arguedas Cuendis, S. Calatroni, C. Cogollos, A. Díaz-Morcillo, B. Döbrich, J. D. Gallego, J. M. García-Barceló, B. Gimeno, J. Golm, X. Granados, J. Gutierrez, L. Herwig, I. G. Irastorza, N. Lamas, A. Lozano-Guerrero, W. L. Millar, C. Malbrunot, J. Miralda-Escudé, P. Navarro, J. R. Navarro-Madrid, T. Puig, M. Siodlaczek, G. T. Telles , et al. (1 additional authors not shown)

Abstract: We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 $μ$eV to 36.5699 $μ$eV, corresponding to a width of 554 kHz, no signal excess hint… ▽ More We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 $μ$eV to 36.5699 $μ$eV, corresponding to a width of 554 kHz, no signal excess hinting at an axion-like particle was found. Correspondingly, in this mass range, a limit on the axion to photon coupling-strength was set in the range between g$_{aγ}\gtrsim$ 6.2e-13 GeV$^{-1}$ and g$_{aγ}\gtrsim$ 1.54e-13 GeV$^{-1}$ with a 95% confidence level. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 19 pages, 8 figures

Report number: CERN-EP-2024-076, MPP-2024-55

Thin Film (High Temperature) Superconducting Radiofrequency Cavities for the Search of Axion Dark Matter

Authors: J. Golm, S. Arguedas Cuendis, S. Calatroni, C. Cogollos, B. Döbrich, J. D. Gallego, J. M. García Barceló, X. Granados, J. Gutierrez, I. G. Irastorza, T. Koettig, N. Lamas, J. Liberadzka-Porret, C. Malbrunot, W. L. Millar, P. Navarro, C. Pereira Carlos, T. Puig, G. J. Rosaz, M. Siodlaczek, G. Telles, W. Wuensch

Abstract: The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $μ$eV. The figure of merit of our detector depends linearly on the quali… ▽ More The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $μ$eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa$_2$Cu$_3$O$_{7-x}$, Nb$_3$Sn or NbN. We designed a microwave cavity which resonates at around 9~GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K. △ Less

Submitted 9 February, 2022; v1 submitted 4 October, 2021; originally announced October 2021.

Comments: 5 pages, 6 figures. v2: minor updates after referee comments, matches published version in IEEE

Journal ref: IEEE Transactions on Applied Superconductivity 2022

Ultra-high critical current densities of superconducting YBa$_2$Cu$_3$O$_{7-δ}$ thin films in the overdoped state

Authors: A. Stangl, A. Palau, G. Deutscher, X. Obradors, T. Puig

Abstract: Do** is one of the most relevant paths to tune the functionality of cuprates, it determines carrier density and the overall physical properties of these impressive superconducting materials. We present an oxygen do** study of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) thin films from underdoped to overdoped state, correlating the measured charge carrier density, $n_\textrm{H}$, the hole do**, $p$, and th… ▽ More Do** is one of the most relevant paths to tune the functionality of cuprates, it determines carrier density and the overall physical properties of these impressive superconducting materials. We present an oxygen do** study of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) thin films from underdoped to overdoped state, correlating the measured charge carrier density, $n_\textrm{H}$, the hole do**, $p$, and the critical current density, $J_\textrm{c}$. Our results show a continuous increase of $J_\textrm{c}$ with charge carrier density, reaching 90 MA/cm$^2$ at 5 K for $p$-do** at the Quantum Critical Point (QCP), linked to an increase of the superconducting condensation energy. The ultra-high $J_\textrm{c}$ achived corresponds to a third of the depairing current, i.e. a value 60 % higher than ever reported in YBCO films. The overdoped regime is characterized by a sudden increase of $n_\textrm{H}$, associated to the reconstruction of the Fermi-surface at the QCP. Overdo** YBCO opens a promising route to extend the current carrying capabilities of REBCO coated conductors for applications. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Journal ref: Sci Rep 11, 8176 (2021)

Intrinsic Anisotropy and Pinning Anisotropy in Nanostructured YBa$_2$Cu$_3$O$_{7-δ}$ from Microwave Measurements

Authors: N. Pompeo, A Alimenti, K Torokhtii, E Bartolomé, A Palau, T Puig, A Augieri, V Galluzzi, A Mancini, G Celentano, X Obradors, E Silva

Abstract: Anisotropy is an intrinsic factor that dictates the magnetic properties of YBCO, thus with great impact for many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of the superconductor makes the quantification of the anisotropy itself uncertain: the intri… ▽ More Anisotropy is an intrinsic factor that dictates the magnetic properties of YBCO, thus with great impact for many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of the superconductor makes the quantification of the anisotropy itself uncertain: the intrinsic anisotropy due to the layered structure, quantified by the anisotropy factor $γ$, mixes up with the additional anisotropy due to pinning. As a consequence, there is no consensus on the experimental anisotropy factor $γ$ that can result in YBCO when directional (twin planes, nanorods) or isotropic defects are present. We present here measurements of the magnetic field and angular dependent surface impedance in very different nanostructured YBCO films, grown by chemical route and by pulsed laser deposition, with different kind of defects (nanorods, twin planes, nanoparticles). We show that the surface impedance measurements are able to disentangle the intrinsic anisotropy from the directional pinning anisotropy, thanks to the possibility to extract the true anisotropic flux--flow resistivity and by correctly exploiting the angular scaling. We find in all films that the intrinsic anisotropy $γ= 5.3\pm0.7$. By contrast, the pinning anisotropy determines a much complex, feature--rich and nonuniversal, sample--dependent angular landscape. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 24 pages, 11 figures, submitted to IOP

Thermoelectric stack sample cooling modification of a commercial atomic force microscopy

Authors: A. del Moral, J. C. González-Rosillo, A. Gómez, T. Puig, X. Obradors

Abstract: Enabling temperature dependent experiments in Atomic Force Microscopy is of great interest to study materials and surface properties at the nanoscale. By studying Curie temperature of multiferroic materials, temperature based phase transition on crystalline structures or resistive switching phenomena are only a few examples of applications. We present an equipment capable of cooling samples using… ▽ More Enabling temperature dependent experiments in Atomic Force Microscopy is of great interest to study materials and surface properties at the nanoscale. By studying Curie temperature of multiferroic materials, temperature based phase transition on crystalline structures or resistive switching phenomena are only a few examples of applications. We present an equipment capable of cooling samples using a thermoelectric cooling stage down to -61.4 C in a 15x15 mm sample plate. The equipment uses a four-unit thermoelectric stack to achieve maximum temperature range, with low electrical and mechanical noise. The equipment is installed into a Keysight 5500LS Atomic Force Microscopy maintaining its compatibility with all Electrical and Mechanical modes of operation. We study the contribution of the liquid cooling pump vibration into the cantilever static deflection noise and the temperature dependence of the cantilever deflection. A La0.7Sr0.3MnO3-y thin film sample is used to demonstrate the performance of the equipment and its usability by analysing the resistive switching phenomena associated with this oxide perovskite. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Resetting Piezoresponse Force Microscopy: Towards a real quantitative technique

Authors: A. Gomez, H. T. T Nong, S. Mercone, T. Puig, X. Obradors

Abstract: A nanometric needle sensor mounted in an Atomic Force Microscopy allows systematic picometer-range distance measurements. This force sensing device is used in Piezoresponse Force Microscopy (PFM) as a distance sensor, by employing the cantilever spring constant as the conversion factor opening a pathway to explore the piezoelectric effect at the nanoscale. The force-distance equivalence is achieve… ▽ More A nanometric needle sensor mounted in an Atomic Force Microscopy allows systematic picometer-range distance measurements. This force sensing device is used in Piezoresponse Force Microscopy (PFM) as a distance sensor, by employing the cantilever spring constant as the conversion factor opening a pathway to explore the piezoelectric effect at the nanoscale. The force-distance equivalence is achieved if the force sensor does not disturb the system to study, solely. In this manuscript we report a systematic study in which different Lead Zirconate Titanate (PZT) materials, having different d33 values, are measured following the standard theory available for PFM. Both in resonance and out of resonance measurements demonstrate that PFM cannot be considered quantitative. After performing the measurements, we propose a correction of the standard theory employed in PFM by considering the force exerted by the material as a variable. The g33 parameter, inherent to piezoelectricity, governs the amount of force available from the system. A comparison of piezoelectric stiffness for the case of a nanoscale site contact region, similar to the one it is found while performing PFM, is provided. Such stiffness is well below the cantilever stiffness, limiting and diminishing the material movement, as the piezoelectric material does not have enough stroke to induce the intended displacement. A correction factor, named Open Piezopotential Gauge, accounts for these effects, which is used to correct the measurements carried out in PZT materials towards a real quantitative PFM. △ Less

Submitted 30 November, 2017; originally announced November 2017.

Comments: 3 figures

Diminish Electrostatic in Piezoresponse Force Microscopy through longer ultra-stiff tips

Authors: Andres Gomez, Mariona Coll, Teresa Puig, Xavier Obradors

Abstract: Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the mechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to piezoelectricity, other physical phenomena, especially electrostatic interaction, can contribute to the signal read. We address this problematic through the use of longe… ▽ More Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the mechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to piezoelectricity, other physical phenomena, especially electrostatic interaction, can contribute to the signal read. We address this problematic through the use of longer ultra-stiff probes providing state of the art sensitivity, with the lowest electrostatic interaction and avoiding working in high frequency regime. In order to find this solution we develop a theoretical description addressing the effects of electrostatic contributions in the total cantilever vibration and its quantification for different setups. The theory is subsequently tested in a Periodically Poled Lithium Niobate (PPLN) crystal, a sample with well-defined 0deg and 180deg domains, using different commercial available conductive tips. We employ the theoretical description to compare the electrostatic contribution effects into the total phase recorded. Through experimental data our description is corroborated for each of the tested commercially available probes. We propose that a larger probe length can be a solution to avoid electrostatic forces, so the cantilever-sample electrostatic interaction is reduced. For hard oxide samples we propose an ultra-stiff cantilever which avoids the use of high frequency voltage but still diminishing electrostatic forces. Our proposed commercially available solution have great implications into avoiding artifacts while studying soft biological samples, multiferroic oxides, and thin film ferroelectric materials and it opens a new window into tip engineering. △ Less

Submitted 6 October, 2016; originally announced October 2016.

Piezo-generated charge map** revealed through Direct Piezoelectric Force Microscopy

Authors: Andres Gomez, Marti Gich, Adrien Carretero-Genevrier, Teresa Puig, Xavier Obradors

Abstract: While piezoelectrics and ferroelectrics are playing a key role in many everyday applications, there are still a number of open questions related to the physics of those materials. In order to foster the understanding of piezoelectrics and ferroelectric and pave the way to future applications, the nanoscale characterization of these materials is essential. In this light, we have developed a novel A… ▽ More While piezoelectrics and ferroelectrics are playing a key role in many everyday applications, there are still a number of open questions related to the physics of those materials. In order to foster the understanding of piezoelectrics and ferroelectric and pave the way to future applications, the nanoscale characterization of these materials is essential. In this light, we have developed a novel AFM based mode that obtains a direct quantitative analysis of the piezoelectric coefficient d33. This nanoscale tool is capable of detecting and reveal piezo-charge generation through the direct piezoelectric effect at the surface of the piezoelectric and ferroelectric materials. We report the first nanoscale images of the charge generated in a thick single crystal of Periodically Poled Lithium Niobate (PPLN) and a Bismuth Ferrite (BiFO3) thin film by applying a force and recording the current produced by the materials. The quantification of both d33 coefficients for PPLN and BFO are 13 +- 2 pC/N and 46 +- 7 pC/N respectively, in agreement with the values reported in the literature. This new mode can operate simultaneously with PFM mode providing a powerful tool for the electromechanical and piezo-charge generation characterization of ferroelectric and piezoelectric materials. △ Less

Submitted 14 September, 2016; originally announced September 2016.

Unusual magneto-transport of YBa2Cu3O7-d films due to the interplay of anisotropy, random disorder and nanoscale periodic pinning

Authors: J. Trastoy, V. Rouco, C. Ulysse, R. Bernard, A. Palau, T. Puig, G. Faini, J. Lesueur, J. Briatico, J. E. Villegas

Abstract: We study the general problem of a manifold of interacting elastic lines whose spatial correlations are strongly affected by the competition between random and ordered pinning. This is done through magneto-transport experiments with YBa2Cu3O7-d thin films that contain a periodic vortex pinning array created via masked ion irradiation, in addition to the native random pinning. The strong field-match… ▽ More We study the general problem of a manifold of interacting elastic lines whose spatial correlations are strongly affected by the competition between random and ordered pinning. This is done through magneto-transport experiments with YBa2Cu3O7-d thin films that contain a periodic vortex pinning array created via masked ion irradiation, in addition to the native random pinning. The strong field-matching effects we observe suggest the prevalence of periodic pinning, and indicate that at the matching field each vortex line is bound to an artificial pinning site. However, the vortex-glass transition dimensionality, quasi-2D instead of the usual 3D, evidences reduced vortex-glass correlations along the vortex line. This is also supported by an unusual angular dependence of the magneto-resistance, which greatly differs from that of Bose-glass systems. A quantitative analysis of the angular magnetoresistance allows us to link this behaviour to the enhancement of the system anisotropy, a collateral effect of the ion irradiation. △ Less

Submitted 23 October, 2013; originally announced October 2013.

Journal ref: New J. Phys. 15 (2013) 103022

Order-preserving factor analysis (OPFA)

Authors: Arnau Tibau Puig, Alfred O. Hero III

Abstract: We present a novel factor analysis method that can be applied to the discovery of common factors shared among trajectories in multivariate time series data. These factors satisfy a precedence-ordering property: certain factors are recruited only after some other factors are activated. Precedence-ordering arise in applications where variables are activated in a specific order, which is unknown. The… ▽ More We present a novel factor analysis method that can be applied to the discovery of common factors shared among trajectories in multivariate time series data. These factors satisfy a precedence-ordering property: certain factors are recruited only after some other factors are activated. Precedence-ordering arise in applications where variables are activated in a specific order, which is unknown. The proposed method is based on a linear model that accounts for each factor's inherent delays and relative order. We present an algorithm to fit the model in an unsupervised manner using techniques from convex and non-convex optimization that enforce sparsity of the factor scores and consistent precedence-order of the factor loadings. We illustrate the Order-Preserving Factor Analysis (OPFA) method for the problem of extracting precedence-ordered factors from a longitudinal (time course) study of gene expression data. △ Less

Submitted 9 May, 2011; originally announced May 2011.

Comments: Technical Report - Communications and Signal Processing Laboratory, University of Michigan, Ann Arbor, MI

Report number: cspl-396

Cross-over between channeling and pinning at twin boundaries in YBa2Cu3O7 thin films

Authors: A. Palau, J. H. Durrell, J. L. MacManus-Driscoll, S. Harrington, T. Puig, F. Sandiumenge, X. Obradors, M. G. Blamire

Abstract: The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a cross-over occurs to a regime in… ▽ More The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a cross-over occurs to a regime in which channeling is blocked and the TBs act as planar pinning centers so that TB pinning enhances the overall Jc. In this regime, intrinsic pinning along the TBs is comparable to that between the twins. △ Less

Submitted 25 July, 2006; originally announced July 2006.

Comments: Submitted to PRL

Giant vortex state in perforated aluminum microsquares

Authors: V. Bruyndoncx, J. G. Rodrigo, T. Puig, L. Van Look, V. V. Moshchalkov, R. Jonckheere

Abstract: We investigate the nucleation of superconductivity in a uniform perpendicular magnetic field H in aluminum microsquares containing a few (2 and 4) submicron holes (antidots). The normal/superconducting phase boundary T_c(H) of these structures shows a quite different behavior in low and high fields. In the low magnetic field regime fluxoid quantization around each antidot leads to oscillations i… ▽ More We investigate the nucleation of superconductivity in a uniform perpendicular magnetic field H in aluminum microsquares containing a few (2 and 4) submicron holes (antidots). The normal/superconducting phase boundary T_c(H) of these structures shows a quite different behavior in low and high fields. In the low magnetic field regime fluxoid quantization around each antidot leads to oscillations in T_c(H), expected from the specific sample geometry, and reminiscent of the network behavior. In high magnetic fields, the T_c(H) boundaries of the perforated and a reference non-perforated microsquare reveal cusps at the same values of Phi/Phi_0 (where Phi is the applied flux threading the total square area and Phi_0 is the superconducting flux quantum), while the background on T_c(H) becomes quasi-linear, indicating that a giant vortex state is established. The influence of the actual geometries on T_c(H) is analyzed in the framework of the linearized Ginzburg-Landau theory. △ Less

Submitted 7 May, 1999; originally announced May 1999.

Comments: 14 pages, 6 PS figures, RevTex, accepted for publication in Phys. Rev. B

Report number: VLEB9901

Journal ref: Phys. Rev. B 60, 4285 (1999)

Vortex configurations in a Pb/Cu microdot with a 2x2 antidot cluster

Authors: T. Puig, E. Rosseel, L. Van Look, M. J. Van Bael, V. V. Moshchalkov, Y. Bruynseraede, R. Jonckheere

Abstract: We present a detailed study of the transport properties of a superconducting Pb/Cu microdot with a 2x2 antidot cluster. The superconducting-normal (S/N) phase boundary, critical currents and current-voltage characteristics of this structure have been measured. The S/N phase boundary as a function of field B (T_c(B)) reveals an oscillatory structure caused by the limited number of possible vortex… ▽ More We present a detailed study of the transport properties of a superconducting Pb/Cu microdot with a 2x2 antidot cluster. The superconducting-normal (S/N) phase boundary, critical currents and current-voltage characteristics of this structure have been measured. The S/N phase boundary as a function of field B (T_c(B)) reveals an oscillatory structure caused by the limited number of possible vortex configurations which can be realized in these small clusters of pinning centres (antidots). We have analyzed the stability of these configurations and discussed the possible dissipation mechanisms using the critical current (J_c(B)) and voltage-current (V(I)) characteristics data. A comparison of the experimental data of T_c(B) and J_c(B) with calculations in the London limit of the Ginzburg-Landau theory confirms that vortices can indeed be pinned by the antidots forming a cluster and that the ground-state configurations of the vortices are noticeably modified by sending current through the structure. The possibility of generating phase-slips as well as motion of the vortices in the 2x2 antidot cluster has also been discussed. △ Less

Submitted 5 June, 1998; originally announced June 1998.

Comments: RevTeX, 22 pages, 15 figures, accepted for publication in PRB

Report number: TP9806PRB

Confinement and Quantization Effects in Mesoscopic Superconducting Structures

Authors: V. V. Moshchalkov, V. Bruyndoncx, E. Rosseel, L. Van Look, M. Baert, M. J. Van Bael, T. Puig, C. Strunk, Y. Bruynseraede

Abstract: We have studied quantization and confinement effects in nanostructured superconductors. Three different types of nanostructured samples were investigated: individual structures (line, loop, dot), 1-dimensional (1D) clusters of loops and 2D clusters of antidots, and finally large lattices of antidots. Hereby, a crossover from individual elementary "plaquettes", via clusters, to huge arrays of the… ▽ More We have studied quantization and confinement effects in nanostructured superconductors. Three different types of nanostructured samples were investigated: individual structures (line, loop, dot), 1-dimensional (1D) clusters of loops and 2D clusters of antidots, and finally large lattices of antidots. Hereby, a crossover from individual elementary "plaquettes", via clusters, to huge arrays of these elements, is realized. The main idea of our study was to vary the boundary conditions for confinement of the superconducting condensate by taking samples of different topology and, through that, modifying the lowest Landau level E_LLL(H). Since the critical temperature versus applied magnetic field T_c(H) is, in fact, E_LLL(H) measured in temperature units, it is varied as well when the sample topology is changed through nanostructuring. We demonstrate that in all studied nanostructured superconductors the shape of the T_c(H) phase boundary is determined by the confinement topology in a unique way. △ Less

Submitted 24 April, 1998; originally announced April 1998.

Comments: 28 pages, 19 EPS figures, uses LaTeX's aipproc.sty, contribution to Euroschool on "Superconductivity in Networks and Mesoscopic Systems", held in Siena, Italy (8-20 september 1997)

Report number: VVM9802