-
Superconducting spin valves based on a single spiral magnetic layer
Authors:
N. G. Pugach,
M. O. Safonchik,
V. I. Belotelov,
T. Ziman,
T. Champel
Abstract:
A detailed investigation of a superconducting spin-triplet valve is presented. This spin-valve consists of a superconducting film covering a metal with an intrinsic spiral magnetic order, which could result from competing isotropic exchanges or, if the crystal lattice breaks central symmetry, from asymmetric Dzyaloshinskii-Moriya exchange. Depending on the anisotropy, such a metal may change its m…
▽ More
A detailed investigation of a superconducting spin-triplet valve is presented. This spin-valve consists of a superconducting film covering a metal with an intrinsic spiral magnetic order, which could result from competing isotropic exchanges or, if the crystal lattice breaks central symmetry, from asymmetric Dzyaloshinskii-Moriya exchange. Depending on the anisotropy, such a metal may change its magnetization either from a spiral to uniform order, as seen in Ho and Er, or in the direction of the spiral itself, as in crystals of the B20-type structure (such as MnSi, (Fe,Co)Si, FeGe, etc.). The nonuniform magnetic order controls the appearance of long-range triplet superconducting correlations at strong exchange fields, affecting the detailed character of the proximity effect. We show that the magnetic control of the spin-valve behavior can also be obtained from moderately low exchange fields (typically associated to negligible long-range triplet correlations), thanks to an orientation-dependent averaging mechanism of the magnetic inhomogeneity on the scale of the Cooper pairs. Our numerical calculations reveal that the spin-valve effect is in fact magnified at moderately low exchange fields, when the exchange splitting in the spiral magnet is comparable to the superconducting gap, and the spiral period is less than or equal to the superconducting coherence length in the magnet multiplied by $2π$.
△ Less
Submitted 29 September, 2022; v1 submitted 1 October, 2021;
originally announced October 2021.
-
Protected 0-pi states in SIsFS junctions for Josephson memory and logic
Authors:
S. V. Bakurskiy,
N. V. Klenov,
I. I. Soloviev,
N. G. Pugach,
M. Yu. Kupriyanov,
A. A. Golubov
Abstract:
We study the peculiarities in current-phase relations (CPR) of the SIsFS junction in the region of $0$ to $π$ transition. These CPR consist of two independent branches corresponding to $0-$ and $π-$ states of the contact. We have found that depending on the transparency of the SIs tunnel barrier the decrease of the s-layer thickness leads to transformation of the CPR shape going in the two possibl…
▽ More
We study the peculiarities in current-phase relations (CPR) of the SIsFS junction in the region of $0$ to $π$ transition. These CPR consist of two independent branches corresponding to $0-$ and $π-$ states of the contact. We have found that depending on the transparency of the SIs tunnel barrier the decrease of the s-layer thickness leads to transformation of the CPR shape going in the two possible ways: either one of the branches exists only in discrete intervals of the phase difference $\varphi$ or both branches are sinusoidal but differ in the magnitude of their critical currents. We demonstrate that the difference can be as large as $10\%$ under maintaining superconductivity in the s layer. An applicability of these phenomena for memory and logic application is discussed.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Superconducting spin valves controlled by spiral re-orientation in B20-family magnets
Authors:
N. G. Pugach,
M. Safonchik,
T. Champel,
M. E. Zhitomirsky,
E. Lähderanta,
M. Eschrig,
C. Lacroix
Abstract:
We propose a superconducting spin-triplet valve, which consists of a superconductor and an itinerant magnetic material, with the magnet showing an intrinsic non-collinear order characterized by a wave vector that may be aligned in a few equivalent preferred directions under control of a weak external magnetic field. Re-orienting the spiral direction allows one to controllably modify long-range spi…
▽ More
We propose a superconducting spin-triplet valve, which consists of a superconductor and an itinerant magnetic material, with the magnet showing an intrinsic non-collinear order characterized by a wave vector that may be aligned in a few equivalent preferred directions under control of a weak external magnetic field. Re-orienting the spiral direction allows one to controllably modify long-range spin-triplet superconducting correlations, leading to spin-valve switching behavior. Our results indicate that the spin-valve effect may be noticeable. This bilayer may be used as a magnetic memory element for cryogenic nanoelectronics. It has the following advantages in comparison to superconducting spin valves proposed previously: (i) it contains only one magnetic layer, which may be more easily fabricated and controlled, (ii) its ground states are separated by a potential barrier, which solves the "half-select" problem of the addressed switch of memory elements.
△ Less
Submitted 23 October, 2017; v1 submitted 28 February, 2017;
originally announced February 2017.
-
The effect of normal metal layers in ferromagnetic Josephson junctions
Authors:
D. M. Heim,
N. G. Pugach,
M. Yu. Kupriyanov,
E. Goldobin,
D. Koelle,
R. Kleiner,
N. Ruppelt,
M. Weides,
H. Kohlstedt
Abstract:
Using the Usadel equation approach, we provide a compact formalism to calculate the critical current density of 21 different types of ferromagnetic (F) Josephson junctions containing insulating (I) and normal metal (N) layers in the weak link regions. In particular, we obtain that even a thin additional N layer may shift the 0-$π$ transitions to larger or smaller values of the thickness $d_F$ of t…
▽ More
Using the Usadel equation approach, we provide a compact formalism to calculate the critical current density of 21 different types of ferromagnetic (F) Josephson junctions containing insulating (I) and normal metal (N) layers in the weak link regions. In particular, we obtain that even a thin additional N layer may shift the 0-$π$ transitions to larger or smaller values of the thickness $d_F$ of the ferromagnet, depending on its conducting properties. For certain values of $d_F$, a 0-$π$ transition can even be achieved by changing only the N layer thickness. We use our model to fit experimental data of SIFS and SINFS tunnel junctions, where S is a superconducting electrode.
△ Less
Submitted 27 July, 2014; v1 submitted 2 October, 2013;
originally announced October 2013.
-
Ferromagnetic planar Josephson junction with transparent interfaces: a φ junction proposal
Authors:
D. M. Heim,
N. G. Pugach,
M. Yu. Kupriyanov,
E. Goldobin,
D. Koelle,
R. Kleiner
Abstract:
We calculate the current phase relation of a planar Josephson junction with a ferromagnetic weak link located on top of a thin normal metal film. Following experimental observations we assume transparent superconductor-ferromagnet interfaces. This provides the best interlayer coupling and a low suppression of the superconducting correlations penetrating from the superconducting electrodes into the…
▽ More
We calculate the current phase relation of a planar Josephson junction with a ferromagnetic weak link located on top of a thin normal metal film. Following experimental observations we assume transparent superconductor-ferromagnet interfaces. This provides the best interlayer coupling and a low suppression of the superconducting correlations penetrating from the superconducting electrodes into the ferromagnetic layer. We show that this Josephson junction is a promising candidate for an experimental φ junction realization.
△ Less
Submitted 8 May, 2013; v1 submitted 18 February, 2013;
originally announced February 2013.
-
Magnetic moment manipulation by triplet Josephson current
Authors:
N. G. Pugach,
A. I. Buzdin
Abstract:
The induced magnetic moment, provided by the bands electrons, is calculated in a variety of Josephson junctions with multilayered ferromagnetic (F) weak link. The noncollinear magnetization of the F layers provides the conditions necessary to generate triplet superconducting correlations. It leads to the long-range induced magnetic moment, emerging in the superconducting (S) layers. It is shown to…
▽ More
The induced magnetic moment, provided by the bands electrons, is calculated in a variety of Josephson junctions with multilayered ferromagnetic (F) weak link. The noncollinear magnetization of the F layers provides the conditions necessary to generate triplet superconducting correlations. It leads to the long-range induced magnetic moment, emerging in the superconducting (S) layers. It is shown to be dependent on the Josephson phase. By tuning the Josephson current, one may control the long-range induced magnetic moment. Alternatively, applying the voltage we can generate an oscillatory magnetic moment. The detection of such a spin effect may serve as independent evidence of the triplet superconductivity. The proposed mechanism seems to be attractive for superconducting spintronic devices with low dissipation.
△ Less
Submitted 12 October, 2012;
originally announced October 2012.
-
Superconductor-insulator-ferromagnet-superconductor Josephson junction: From the dirty to the clean limit
Authors:
N. G. Pugach,
M. Yu. Kupriyanov,
E. Goldobin,
R. Kleiner,
D. Koelle
Abstract:
The proximity effect and the Josephson current in a superconductor-insulator-ferromagnet-superconductor (SIFS) junction are investigated within the framework of the quasiclassical Eilenberger equations. This investigation allows us to compare the dirty and the clean limits, to investigate an arbitrary impurity scattering, and to determine the applicability limits of the Usadel equations for such s…
▽ More
The proximity effect and the Josephson current in a superconductor-insulator-ferromagnet-superconductor (SIFS) junction are investigated within the framework of the quasiclassical Eilenberger equations. This investigation allows us to compare the dirty and the clean limits, to investigate an arbitrary impurity scattering, and to determine the applicability limits of the Usadel equations for such structures. The role of different types of the FS interface is analyzed. It is shown that the decay length and the spatial oscillation period of the Eilenberger function may exhibit a nonmonotonic dependence on the properties of the ferromagnetic layer such as exchange field or electron mean free path. The results of our calculations are applied to the interpretation of experimentally observed dependencies of the critical current density on the ferromagnet thickness in Josephson junctions containing a Ni layer with an arbitrary scattering.
△ Less
Submitted 16 September, 2011;
originally announced September 2011.
-
Method for reliable realization of a varphi Josephson junction
Authors:
N. G. Pugach,
E. Goldobin,
R. Kleiner,
D. Koelle
Abstract:
We propose a method to realize a $φ$ Josephson junction by combining alternating 0 and $π$ parts (sub junctions) with an intrinsically non-sinusoidal current-phase relation (CPR). Conditions for the realization of the $φ$ ground state are analyzed. It is shown that taking into account the non-sinusoidal CPR for a "clean junction with a ferromagnetic (F) barrier, one can significantly enlarge the…
▽ More
We propose a method to realize a $φ$ Josephson junction by combining alternating 0 and $π$ parts (sub junctions) with an intrinsically non-sinusoidal current-phase relation (CPR). Conditions for the realization of the $φ$ ground state are analyzed. It is shown that taking into account the non-sinusoidal CPR for a "clean junction with a ferromagnetic (F) barrier, one can significantly enlarge the domain (regime of suitable F-layer thicknesses) of the $φ$ ground state and make the practical realization of $φ$ Josephson junctions feasible. Such junctions may also have two different stable solutions, such as 0 and $π$, 0 and $φ$, or $φ$ and $π$.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.