-
Magnetograms underestimate even unipolar magnetic flux nearly everywhere on the solar disk
Authors:
Jonas Sinjan,
Sami K. Solanki,
Johann Hirzberger,
Tino L. Riethmüller,
Damien Przybylski
Abstract:
We aim to test the reliability of determining the line-of-sight magnetic field from a 3D MHD simulation of a unipolar region. In contrast to earlier similar studies, we consider the full solar disk, i.e. considering the full centre-to-limb variation, as well as regions with different averaged field strengths. We synthesised Stokes profiles from MURaM MHD simulations of unipolar regions with varyin…
▽ More
We aim to test the reliability of determining the line-of-sight magnetic field from a 3D MHD simulation of a unipolar region. In contrast to earlier similar studies, we consider the full solar disk, i.e. considering the full centre-to-limb variation, as well as regions with different averaged field strengths. We synthesised Stokes profiles from MURaM MHD simulations of unipolar regions with varying mean vertical magnetic flux densities, ranging from quiet Sun to active region plage. We did this for a comprehensive range of heliocentric angles: from $μ=1$ to $μ=0.15$, and for two commonly used photospheric spectral lines: Fe I $6173.3$ and Fe I $5250.2$Å. The line-of-sight magnetic field was derived with a Milne-Eddington Inversion as well as with other commonly used methods. The inferred spatially averaged $\langle B_{LOS}\rangle$ is always lower than that present in the MHD simulations, with the exception of $μ\approx 1$ and sufficiently high spatial resolution. It is also generally inconsistent with a linear dependence on $μ$. Above $μ=0.5$ the spatial resolution greatly impacts the retrieved line-of-sight magnetic field. For $μ\leq0.5$ the retrieved $B_{LOS}$ is nearly independent of resolution, but is always lower than expected from the simulation. These trends persist regardless of the mean vertical magnetic field in the MHD simulations and are independent of the $B_{LOS}$ retrieval method. For $μ\leq0.5$, a larger $\langle B_{LOS}\rangle$ is inferred for the $5250.2$Å spectral line than $6173.3$Å, but the converse is true at higher $μ$. The results found here raise some doubts of the reliability of determining the radial field by dividing the line-of-sight field by $μ$ and are of considerable importance for deducing the total magnetic flux of the Sun. They may also contribute to the resolution of the open flux problem.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Testing MURaM and MPS-ATLAS against the quiet solar spectrum
Authors:
Veronika Witzke,
Alexander I. Shapiro,
Nadiia M. Kostogryz,
Lucien Mauviard,
Tanayveer S. Bhatia,
Robert Cameron,
Laurent Gizon,
Damien Przybylski,
Sami K. Solanki,
Yvonne C. Unruh,
Li Yue
Abstract:
Three-dimensional (3D) radiative magnetohydrodynamics (MHD) simulations are the only way to model stellar atmospheres without any ad hoc parameterisations. Several 3D radiative MHD codes have achieved good quantitative agreement with observables for our Sun. We aim to validate the most up-to-date version of the MURaM code against well established quiet Sun measurements, in particular spatially ave…
▽ More
Three-dimensional (3D) radiative magnetohydrodynamics (MHD) simulations are the only way to model stellar atmospheres without any ad hoc parameterisations. Several 3D radiative MHD codes have achieved good quantitative agreement with observables for our Sun. We aim to validate the most up-to-date version of the MURaM code against well established quiet Sun measurements, in particular spatially averaged measurements that are relevant for stellar studies. This validation extends the number of solar observables that MURaM can reproduce with high precision. It is also an essential condition for using MURaM to accurately calculate spectra of other cool stars. We simulate the solar upper convection zone and photosphere harbouring a small-scale-dynamo. Using time series of 3D snapshots we calculate the spectral irradiance, limb darkening and selected spectral lines, which we compare to observations. The computed observables agree well with the observations, in particular the limb darkening of the quiet Sun is reproduced remarkably well.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
Small-scale dynamo in cool main sequence stars. II. The effect of metallicity
Authors:
V. Witzke,
H. B. Duehnen,
A. I. Shapiro,
D. Przybylski,
T. S. Bhatia,
R. Cameron,
S. K. Solanki
Abstract:
All cool main sequence stars including our Sun are thought to have magnetic fields. Observations of the Sun revealed that even in quiet regions small-scale turbulent magnetic fields are present. Simulations further showed that such magnetic fields affect the subsurface and photospheric structure, and thus the radiative transfer and emergent flux. Since small-scale turbulent magnetic fields on othe…
▽ More
All cool main sequence stars including our Sun are thought to have magnetic fields. Observations of the Sun revealed that even in quiet regions small-scale turbulent magnetic fields are present. Simulations further showed that such magnetic fields affect the subsurface and photospheric structure, and thus the radiative transfer and emergent flux. Since small-scale turbulent magnetic fields on other stars cannot be directly observed, it is imperative to study their effects on the near surface layers numerically. Until recently comprehensive three-dimensional simulations capturing the effect of small-scale turbulent magnetic fields only exists for the solar case. A series of investigations extending SSD simulations for other stars has been started. Here we aim to examine small-scale turbulent magnetic fields in stars of solar effective temperature but different metallicity. We investigate the properties of three-dimensional simulations of the magneto-convection in boxes covering the upper convection zone and photosphere carried out with the MURaM code for metallicity values of $ \rm M/H = \{-1.0, 0.0, 0.5\}$ with and without a small-scale-dynamo. We find that small-scale turbulent magnetic fields enhanced by a small-scale turbulent dynamo noticeably affect the subsurface dynamics and significantly change the flow velocities in the photosphere. Moreover, significantly stronger magnetic field strengths are present in the convection zone for low metallicity. Whereas, at the optical surface the averaged vertical magnetic field ranges from 64G for M/H = 0.5 to 85G for M/H = -1.0.
△ Less
Submitted 4 November, 2022;
originally announced November 2022.
-
Small-scale Dynamo in Cool Stars: I. Changes in stratification and near-surface convection for main-sequence spectral types
Authors:
Tanayveer S. Bhatia,
Robert H. Cameron,
Sami K. Solanki,
Hardi Peter,
Damien Przybylski,
Veronika Witzke,
Alexander Shapiro
Abstract:
Some of the small-scale solar magnetic flux can be attributed to a small-scale dynamo (SSD) operating in the near-surface convection. The SSD fields have consequences for solar granular convection, basal flux, as well as chromospheric heating. A similar SSD mechanism is expected to be active in the near-surface convection of other cool main-sequence stars, but this has never been investigated. We…
▽ More
Some of the small-scale solar magnetic flux can be attributed to a small-scale dynamo (SSD) operating in the near-surface convection. The SSD fields have consequences for solar granular convection, basal flux, as well as chromospheric heating. A similar SSD mechanism is expected to be active in the near-surface convection of other cool main-sequence stars, but this has never been investigated. We aim to investigate changes in stratification and convection due to inclusion of SSD fields for F3V, G2V, K0V and M0V spectral types in the near-surface convection. 3D magnetohydrodynamic (MHD) models of the four stellar boxes, covering the subsurface convection zone up to the lower photosphere in a small cartesian box, are studied using the \textit{MURaM} radiative-MHD simulation code. The SSD runs are compared against reference hydrodynamic runs. An SSD is found to efficiently produce magnetic field with energies ranging between 5\% to 80\% of the plasma kinetic energy at different depths. This ratio tends to be larger for larger $T_{\mathrm{eff}}$. The relative change in density and gas pressure stratification for the deeper convective layers due to SSD magnetic fields is negligible, except for the F-star. For the F-star, there is a substantial reduction in convective velocities due to Lorentz force feedback from magnetic fields, which, in turn, reduces the turbulent pressure. SSD in near-surface convection for cool main-sequence stars introduces small but significant changes in thermodynamic stratification (especially for the F-star) due to reduction in convective velocities.
△ Less
Submitted 20 July, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Chromospheric Extension of the MURaM Code
Authors:
D. Przybylski,
R. Cameron,
S. K. Solanki,
M. Rempel,
J. Leenaarts,
L. S. Anusha,
V. Witzke,
A. I. Shapiro
Abstract:
Detailed numerical models of chromosphere and corona are required to understand the heating of the solar atmosphere. An accurate treatment of the solar chromosphere is complicated by the effects arising from Non Local Thermodynamic Equilibrium (NLTE) radiative transfer. A small number of strong, highly scattering lines dominate the cooling and heating in the chromosphere. Additionally, the recombi…
▽ More
Detailed numerical models of chromosphere and corona are required to understand the heating of the solar atmosphere. An accurate treatment of the solar chromosphere is complicated by the effects arising from Non Local Thermodynamic Equilibrium (NLTE) radiative transfer. A small number of strong, highly scattering lines dominate the cooling and heating in the chromosphere. Additionally, the recombination times of ionised hydrogen are longer than the dynamical timescales, requiring a non-equilibrium (NE) treatment of hydrogen ionisation. The MURaM code is extended to include the physical process required for accurate simulation of the solar chromosphere, as implemented in the Bifrost code. This includes a time-dependent treatment of hydrogen ionisation, a scattering multi-group radiation transfer scheme and approximations for NLTE radiative cooling. The inclusion of NE and NLTE physics has a large impact on the structure of the chromosphere; the NE treatment of hydrogen ionisation leads to a higher ionisation fraction and enhanced populations in the first excited state throughout cold inter-shock regions of the chromosphere. Additionally this prevents hydrogen ioniation from buffering energy fluctuations, leading to hotter shocks and cooler inter-shock regions. The hydrogen populations in the ground and first excited state are enhanced by $10^2-10^3$ in the upper chromosphere and up to $10^9$ near the transition region. Including the necessary NLTE physics leads to significant differences in chromospheric structure and dynamics. The thermodynamics and hydrogen populations calculated using the extended version of the MURaM code are consistent with previous non-equilibrium simulations. The electron number and temperature calculated using the non-equilibrium treatment of the chromosphere are required to accurately synthesise chromospheric spectral lines.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Doppler shifts of spectral lines formed in the solar transition region and corona
Authors:
Yajie Chen,
Hardi Peter,
Damien Przybylski,
Hui Tian,
Jiale Zhang
Abstract:
Context. Emission lines formed in the transition region and corona show dominantly redshifts and blueshifts, respectively. Aims. We investigate the Doppler shifts in a 3D radiation MHD model of the quiet Sun and compare these to observed properties. We concentrate on Si IV 1394 A originating in the transition region and examine the Doppler shifts of several other spectral lines at different format…
▽ More
Context. Emission lines formed in the transition region and corona show dominantly redshifts and blueshifts, respectively. Aims. We investigate the Doppler shifts in a 3D radiation MHD model of the quiet Sun and compare these to observed properties. We concentrate on Si IV 1394 A originating in the transition region and examine the Doppler shifts of several other spectral lines at different formation temperatures. Methods. We construct a radiation MHD model extending from the upper convection zone to the lower corona using the MURaM code. In this quiet Sun model the magnetic field is self-consistently maintained by the action of a small-scale dynamo. We synthesize the profiles of several optically thin emission lines, formed at temperatures from the transition region into the corona. We investigate the spatial structure and coverage of red- and blueshifts and how this changes with line-formation temperature. Results. The model successfully reproduces the observed change of average net Doppler shifts from red- to blueshifted from the transition region into the corona. In particular, the model shows a clear imbalance of area coverage of red- vs. blueshifts in the transition region of ca. 80% to 20%. We determine that (at least) four processes generate the systematic Doppler shifts in our model, including pressure enhancement in the transition region, transition region brightenings unrelated to coronal emission, boundaries between cold and hot plasma, and siphon-type flows. Conclusions. We show that there is not a single process that is responsible for the observed net Doppler shifts in the transition region and corona. Because current 3D MHD models do not yet fully capture the evolution of spicules, one of the key ingredients of the chromosphere, most probably these have still to be added to the list of processes responsible for the persistent Doppler shifts.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
A solar coronal loop in a box: Energy generation and heating
Authors:
C. Breu,
H. Peter,
R. Cameron,
S. K. Solanki,
D. Przybylski,
M. Rempel,
L. P. Chitta
Abstract:
Coronal loops are the basic building block of the upper solar atmosphere. Comprehending how these are energized, structured, and evolve is key to understanding stellar coronae.
Here we investigate how the energy to heat the loop is generated by photospheric magneto-convection, transported into the upper atmosphere, and how the internal structure of a coronal loop forms.
In a 3D magnetohydrodyn…
▽ More
Coronal loops are the basic building block of the upper solar atmosphere. Comprehending how these are energized, structured, and evolve is key to understanding stellar coronae.
Here we investigate how the energy to heat the loop is generated by photospheric magneto-convection, transported into the upper atmosphere, and how the internal structure of a coronal loop forms.
In a 3D magnetohydrodynamics (MHD) model, we study an isolated coronal loop rooted with both footpoints in a shallow layer within the convection zone using the MURaM code. To resolve its internal structure, we limited the computational domain to a rectangular box containing a single coronal loop as a straightened magnetic flux tube. Field-aligned heat conduction, gray radiative transfer in the photosphere and chromosphere, and optically thin radiative losses in the corona were taken into account. The footpoints were allowed to interact self-consistently with the granulation surrounding them.
The loop is heated by a Poynting flux that is self-consistently generated through small-scale motions within individual magnetic concentrations in the photosphere. Turbulence develops in the upper layers of the atmosphere as a response to the footpoint motions. We see little sign of heating by large-scale braiding of magnetic flux tubes from different photospheric concentrations at a given footpoint. The synthesized emission, as it would be observed by the Atmospheric Imaging Assembly or the X-ray Telescope, reveals transient bright strands that form in response to the heating events. Overall, our model roughly reproduces the properties and evolution of the plasma as observed within coronal loops.
With this model we can build a coherent picture of how the energy flux to heat the upper atmosphere is generated near the solar surface and how this process drives and governs the heating and dynamics of a coronal loop.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Efficient numerical treatment of ambipolar and Hall drift as hyperbolic system
Authors:
M. Rempel,
D. Przybylski
Abstract:
Partially ionized plasmas, such as the solar chromosphere, require a generalized Ohm's law including the effects of ambipolar and Hall drift. While both describe transport processes that arise from the multifluid equations and are therefore of hyperbolic nature, they are often incorporated in models as a diffusive, i.e. parabolic process. While the formulation as such is easy to include in standar…
▽ More
Partially ionized plasmas, such as the solar chromosphere, require a generalized Ohm's law including the effects of ambipolar and Hall drift. While both describe transport processes that arise from the multifluid equations and are therefore of hyperbolic nature, they are often incorporated in models as a diffusive, i.e. parabolic process. While the formulation as such is easy to include in standard MHD models, the resulting diffusive time-step constraints do require often a computationally more expensive implicit treatment or super-time-step** approaches. In this paper we discuss an implementation that retains the hyperbolic nature and allows for an explicit integration with small computational overhead. In the case of ambipolar drift, this formulation arises naturally by simply retaining a time derivative of the drift velocity that is typically omitted. This alone leads to time-step constraints that are comparable to the native MHD time-step constraint for a solar setup including the region from photosphere to lower solar corona. We discuss an accelerated treatment that can further reduce time-step constraints if necessary. In the case of Hall drift we propose a hyperbolic formulation that is numerically similar to that for the ambipolar drift and we show that the combination of both can be applied to simulations of the solar chromosphere at minimal computational expense.
△ Less
Submitted 26 November, 2021;
originally announced November 2021.
-
Refactoring the MPS/University of Chicago Radiative MHD(MURaM) Model for GPU/CPU Performance Portability Using OpenACC Directives
Authors:
Eric Wright,
Damien Przybylski,
Matthias Rempel,
Cena Miller,
Supreeth Suresh,
Shiquan Su,
Richard Loft,
Sunita Chandrasekaran
Abstract:
The MURaM (Max Planck University of Chicago Radiative MHD) code is a solar atmosphere radiative MHD model that has been broadly applied to solar phenomena ranging from quiet to active sun, including eruptive events such as flares and coronal mass ejections. The treatment of physics is sufficiently realistic to allow for the synthesis of emission from visible light to extreme UV and X-rays, which i…
▽ More
The MURaM (Max Planck University of Chicago Radiative MHD) code is a solar atmosphere radiative MHD model that has been broadly applied to solar phenomena ranging from quiet to active sun, including eruptive events such as flares and coronal mass ejections. The treatment of physics is sufficiently realistic to allow for the synthesis of emission from visible light to extreme UV and X-rays, which is critical for a detailed comparison with available and future multi-wavelength observations. This component relies critically on the radiation transport solver (RTS) of MURaM; the most computationally intensive component of the code. The benefits of accelerating RTS are multiple fold: A faster RTS allows for the regular use of the more expensive multi-band radiation transport needed for comparison with observations, and this will pave the way for the acceleration of ongoing improvements in RTS that are critical for simulations of the solar chromosphere. We present challenges and strategies to accelerate a multi-physics, multi-band MURaM using a directive-based programming model, OpenACC in order to maintain a single source code across CPUs and GPUs. Results for a $288^3$ test problem show that MURaM with the optimized RTS routine achieves 1.73x speedup using a single NVIDIA V100 GPU over a fully subscribed 40-core Intel Skylake CPU node and with respect to the number of simulation points (in millions) per second, a single NVIDIA V100 GPU is equivalent to 69 Skylake cores. We also measure parallel performance on up to 96 GPUs and present weak and strong scaling results.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Transient small-scale brightenings in the quiet solar corona: a model for campfires observed with Solar Orbiter
Authors:
Yajie Chen,
Damien Przybylski,
Hardi Peter,
Hui Tian,
F. Auchère,
D. Berghmans
Abstract:
Context. Recent observations by the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter have characterized prevalent small-scale transient brightenings in the corona above the quiet Sun termed campfires. Aims. In this study we search for comparable brightenings in a numerical model and then investigate their relation to the magnetic field and the processes that drive these events. Methods. We…
▽ More
Context. Recent observations by the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter have characterized prevalent small-scale transient brightenings in the corona above the quiet Sun termed campfires. Aims. In this study we search for comparable brightenings in a numerical model and then investigate their relation to the magnetic field and the processes that drive these events. Methods. We use the MURaM code to solve the 3D radiation MHD equations in a box that stretches from the upper convection zone to the corona. The model self-consistently produces a supergranular network of the magnetic field and a hot corona above this quiet Sun. For the comparison with the model we synthesize the coronal emission as seen by EUI in its 174 Å channel, isolate the seven strongest transient brightenings, and investigate (the changes of) the magnetic field in and around these in detail. Results. The transients we isolate have a lifetime of about 2 minutes and are elongated loop-like features with lengths around 1Mm to 4 Mm. They tend to occur at heights of about 2Mm to 5Mm above the photosphere a bit offset from magnetic concentrations that mark the bright chromospheric network and they reach temperatures of above 1 MK. With this they very much resemble the (larger) campfires found in observations. In our model most events are energised by component reconnection between (bundles of) field lines that interact at coronal heights. In one case we find that untwisting of a highly twisted flux rope initiates the heating. Conclusions. Based on our study we propose that the majority of campfire events found by EUI are driven by component reconnection and our model suggests that this process contributes significantly to the heating of the corona above the quiet Sun.
△ Less
Submitted 4 May, 2021; v1 submitted 22 April, 2021;
originally announced April 2021.
-
Magnetic Imaging of the Outer Solar Atmosphere (MImOSA): Unlocking the driver of the dynamics in the upper solar atmosphere
Authors:
H. Peter,
E. Alsina Ballester,
V. Andretta,
F. Auchere,
L. Belluzzi,
A. Bemporad,
D. Berghmans,
E. Buchlin,
A. Calcines,
L. P. Chitta,
K. Dalmasse,
T. del Pino Aleman,
A. Feller,
C. Froment,
R. Harrison,
M. Janvier,
S. Matthews,
S. Parenti,
D. Przybylski,
S. K. Solanki,
J. Stepan,
L. Teriaca,
J. Trujillo Bueno
Abstract:
The magnetic activity of the Sun directly impacts the Earth and human life. Likewise, other stars will have an impact on the habitability of planets orbiting these host stars. The lack of information on the magnetic field in the higher atmospheric layers hampers our progress in understanding solar magnetic activity. Overcoming this limitation would allow us to address four paramount long-standing…
▽ More
The magnetic activity of the Sun directly impacts the Earth and human life. Likewise, other stars will have an impact on the habitability of planets orbiting these host stars. The lack of information on the magnetic field in the higher atmospheric layers hampers our progress in understanding solar magnetic activity. Overcoming this limitation would allow us to address four paramount long-standing questions: (1) How does the magnetic field couple the different layers of the atmosphere, and how does it transport energy? (2) How does the magnetic field structure, drive and interact with the plasma in the chromosphere and upper atmosphere? (3) How does the magnetic field destabilise the outer solar atmosphere and thus affect the interplanetary environment? (4) How do magnetic processes accelerate particles to high energies? New ground-breaking observations are needed to address these science questions. We suggest a suite of three instruments that far exceed current capabilities in terms of spatial resolution, light-gathering power, and polarimetric performance: (a) A large-aperture UV-to-IR telescope of the 1-3 m class aimed mainly to measure the magnetic field in the chromosphere by combining high spatial resolution and high sensitivity. (b) An extreme-UV-to-IR coronagraph that is designed to measure the large-scale magnetic field in the corona with an aperture of about 40 cm. (c) An extreme-UV imaging polarimeter based on a 30 cm telescope that combines high throughput in the extreme UV with polarimetry to connect the magnetic measurements of the other two instruments. This mission to measure the magnetic field will unlock the driver of the dynamics in the outer solar atmosphere and thereby greatly advance our understanding of the Sun and the heliosphere.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Probing sunspots with two-skip time-distance helioseismology
Authors:
T. L. Duvall Jr.,
P. S. Cally,
D. Przybylski,
K. Nagashima,
L. Gizon
Abstract:
Previous helioseismology of sunspots has been sensitive to both the structural and magnetic aspects of sunspot structure. We aim to develop a technique that is insensitive to the magnetic component so the two aspects can be more readily separated. We study waves reflected almost vertically from the underside of a sunspot. Time-distance helioseismology was used to measure travel times for the waves…
▽ More
Previous helioseismology of sunspots has been sensitive to both the structural and magnetic aspects of sunspot structure. We aim to develop a technique that is insensitive to the magnetic component so the two aspects can be more readily separated. We study waves reflected almost vertically from the underside of a sunspot. Time-distance helioseismology was used to measure travel times for the waves. Ray theory and a detailed sunspot model were used to calculate travel times for comparison. It is shown that these large distance waves are insensitive to the magnetic field in the sunspot. The largest travel time differences for any solar phenomena are observed. With sufficient modeling effort, these should lead to better understanding of sunspot structure.
△ Less
Submitted 6 June, 2018; v1 submitted 4 June, 2018;
originally announced June 2018.
-
Inversions of synthetic umbral flashes: effects of the scanning time on the inferred atmospheres
Authors:
T. Felipe,
H. Socas-Navarro,
D. Przybylski
Abstract:
The use of instruments that record narrow band images at selected wavelengths is a common approach in solar observations. They allow the scanning of a spectral line by sampling the Stokes profiles with 2D images at each line position, but require a compromise between spectral resolution and temporal cadence. We evaluate the impact of the time-dependent acquisition of different wavelengths on the i…
▽ More
The use of instruments that record narrow band images at selected wavelengths is a common approach in solar observations. They allow the scanning of a spectral line by sampling the Stokes profiles with 2D images at each line position, but require a compromise between spectral resolution and temporal cadence. We evaluate the impact of the time-dependent acquisition of different wavelengths on the inversion of spectropolarimetric profiles from chromospheric lines during umbral flashes. Simulations of non-linear wave propagation in a sunspot were performed with the code MANCHA. Synthetic Stokes parameters in the Ca II 8542 A line in NLTE were computed for an umbral flash using the code NICOLE. Artificial profiles with the same wavelength coverage and temporal cadence from reported observations were constructed and inverted. The inferred atmospheric stratifications were compared with the original models. The inferred atmospheres provide a reasonable characterization of the thermodynamic properties of the atmosphere during most of the phases of the umbral flash. Only at the early stages of the flash, when the shock wave reaches the formation height of the line, the Stokes profiles present apparent wavelength shifts and other spurious deformations. These features are misinterpreted by the inversion code, which can return unrealistic atmospheric models from a good fit of the Stokes profiles. The misguided results include flashed atmospheres with strong downflows, even though the simulation exhibits upflows during the umbral flash, and large variations in the magnetic field strength. Our analyses validate the inversion of Stokes profiles acquired by sequentially scanning certain selected wavelengths of a line profile, even in the case of rapidly-changing events such as umbral flashes. However, the inversions are unreliable during a short period at the development phase of the flash.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Heating of the partially ionized solar chromosphere by waves in magnetic structures
Authors:
S. Shelyag,
E. Khomenko,
A. de Vicente,
D. Przybylski
Abstract:
In this paper, we show a "proof of concept" of the heating mechanism of the solar chromosphere due to wave dissipation caused by the effects of partial ionization. Numerical modeling of non-linear wave propagation in a magnetic flux tube, embedded in the solar atmosphere, is performed by solving a system of single-fluid quasi-MHD equations, which take into account the ambipolar term from the gener…
▽ More
In this paper, we show a "proof of concept" of the heating mechanism of the solar chromosphere due to wave dissipation caused by the effects of partial ionization. Numerical modeling of non-linear wave propagation in a magnetic flux tube, embedded in the solar atmosphere, is performed by solving a system of single-fluid quasi-MHD equations, which take into account the ambipolar term from the generalized Ohm's law. It is shown that perturbations caused by magnetic waves can be effectively dissipated due to ambipolar diffusion. The energy input by this mechanism is continuous and shown to be more efficient than dissipation of static currents, ultimately leading to chromospheric temperature increase in magnetic structures.
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
-
3D simulations of realistic power halos in magneto-hydrostatic sunspot atmospheres: linking theory and observation
Authors:
Carlos Rijs,
S. P. Rajaguru,
Damien Przybylski,
Hamed Moradi,
Paul S. Cally,
Sergiy Shelyag
Abstract:
The well-observed acoustic halo is an enhancement in time-averaged Doppler velocity and intensity power with respect to quiet-sun values which is prominent for weak and highly inclined field around the penumbra of sunspots and active regions. We perform 3D linear wave modelling with realistic distributed acoustic sources in a MHS sunspot atmosphere and compare the resultant simulation enhancements…
▽ More
The well-observed acoustic halo is an enhancement in time-averaged Doppler velocity and intensity power with respect to quiet-sun values which is prominent for weak and highly inclined field around the penumbra of sunspots and active regions. We perform 3D linear wave modelling with realistic distributed acoustic sources in a MHS sunspot atmosphere and compare the resultant simulation enhancements with multi-height SDO observations of the phenomenon. We find that simulated halos are in good qualitative agreement with observations. We also provide further proof that the underlying process responsible for the halo is the refraction and return of fast magnetic waves which have undergone mode conversion at the critical $a=c$ atmospheric layer. In addition, we also find strong evidence that fast-Alfvén mode conversion plays a significant role in the structure of the halo, taking energy away from photospheric and chromospheric heights in the form of field-aligned Alfvén waves. This conversion process may explain the observed "dual-ring" halo structure at higher ($> 8 $ mHz) frequencies.
△ Less
Submitted 3 December, 2015;
originally announced December 2015.
-
Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --
Authors:
N. Adachi,
V. Adamovitch,
Y. Adjovi,
K. Aida,
H. Akamatsu,
S. Akiyama,
A. Akli,
A. Ando,
T. Andrault,
H. Antonietti,
S. Anzai,
G. Arkoun,
C. Avenoso,
D. Ayrault,
M. Banasiewicz,
M. Banaśkiewicz,
L. Bernandini,
E. Bernard,
E. Berthet,
M. Blanchard,
D. Boreyko,
K. Boros,
S. Charron,
P. Cornette,
K. Czerkas
, et al. (208 additional authors not shown)
Abstract:
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereab…
▽ More
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereabouts and activities. The distributions of annual external doses estimated for each region overlap with each other, demonstrating that the personal external individual doses in locations where residence is currently allowed in Fukushima Prefecture and in Belarus are well within the range of estimated annual doses due to the background radiation level of other regions/countries.
△ Less
Submitted 18 November, 2015; v1 submitted 21 June, 2015;
originally announced June 2015.
-
Spectropolarimetrically accurate magnetohydrostatic sunspot model for forward modelling in helioseismology
Authors:
D. Przybylski,
S. Shelyag,
P. S. Cally
Abstract:
We present a technique to construct a spectropolarimetrically accurate magneto-hydrostatic model of a large-scale solar magnetic field concentration, mimicking a sunspot. Using the constructed model we perform a simulation of acoustic wave propagation, conversion and absorption in the solar interior and photosphere with the sunspot embedded into it. With the $6173\mathrmÅ$ magnetically sensitive p…
▽ More
We present a technique to construct a spectropolarimetrically accurate magneto-hydrostatic model of a large-scale solar magnetic field concentration, mimicking a sunspot. Using the constructed model we perform a simulation of acoustic wave propagation, conversion and absorption in the solar interior and photosphere with the sunspot embedded into it. With the $6173\mathrmÅ$ magnetically sensitive photospheric absorption line of neutral iron, we calculate observable quantities such as continuum intensities, Doppler velocities, as well as full Stokes vector for the simulation at various positions at the solar disk, and analyse the influence of non-locality of radiative transport in the solar photosphere on helioseismic measurements. Bisector shapes were used to perform multi-height observations. The differences in acoustic power at different heights within the line formation region at different positions at the solar disk were simulated and characterised. An increase in acoustic power in the simulated observations of the sunspot umbra away from the solar disk centre was confirmed as the slow magneto-acoustic wave.
△ Less
Submitted 9 April, 2015;
originally announced April 2015.
-
Directional Time-Distance Probing of Model Sunspot Atmospheres
Authors:
H. Moradi,
P. S. Cally,
D. Przybylski,
S. Shelyag
Abstract:
A crucial feature not widely accounted for in local helioseismology is that surface magnetic regions actually open a window from the interior into the solar atmosphere, and that the seismic waves leak through this window, reflect high in the atmosphere, and then re-enter the interior to rejoin the seismic wave field normally confined there. In a series of recent numerical studies using translation…
▽ More
A crucial feature not widely accounted for in local helioseismology is that surface magnetic regions actually open a window from the interior into the solar atmosphere, and that the seismic waves leak through this window, reflect high in the atmosphere, and then re-enter the interior to rejoin the seismic wave field normally confined there. In a series of recent numerical studies using translation invariant atmospheres, we utilised a "directional time-distance helioseismology" measurement scheme to study the implications of the returning fast and Alfvén waves higher up in the solar atmosphere on the seismology at the photosphere (Cally & Moradi 2013; Moradi & Cally 2014). In this study, we extend our directional time-distance analysis to more realistic sunspot-like atmospheres to better understand the direct effects of the magnetic field on helioseismic travel-time measurements in sunspots. In line with our previous findings, we uncover a distinct frequency-dependant directional behaviour in the travel-time measurements, consistent with the signatures of MHD mode conversion. We found this to be the case regardless of the sunspot field strength or depth of its Wilson depression. We also isolated and analysed the direct contribution from purely thermal perturbations to the measured travel times, finding that waves propagating in the umbra are much more sensitive to the underlying thermal effects of the sunspot.
△ Less
Submitted 14 March, 2015;
originally announced March 2015.
-
MHD wave refraction and the acoustic halo effect around solar active regions - a 3D study
Authors:
Carlos Rijs,
Hamed Moradi,
Damien Przybylski,
Paul S. Cally
Abstract:
An enhancement in high-frequency acoustic power is commonly observed in the solar photosphere and chromosphere surrounding magnetic active regions. We perform 3D linear forward wave modelling with a simple wavelet pulse acoustic source to ascertain whether the formation of the acoustic halo is caused by MHD mode conversion through regions of moderate and inclined magnetic fields. This conversion t…
▽ More
An enhancement in high-frequency acoustic power is commonly observed in the solar photosphere and chromosphere surrounding magnetic active regions. We perform 3D linear forward wave modelling with a simple wavelet pulse acoustic source to ascertain whether the formation of the acoustic halo is caused by MHD mode conversion through regions of moderate and inclined magnetic fields. This conversion type is most efficient when high frequency waves from below intersect magnetic field lines at a large angle. We find a strong relationship between halo formation and the equipartition surface at which the Alfvén speed $a$ matches the sound speed $c$, lending support to the theory that photospheric and chromospheric halo enhancement is due to the creation and subsequent reflection of magnetically dominated fast waves from essentially acoustic waves as they cross $a=c$. In simulations where we have capped $a$ such that waves are not permitted to refract after reaching the $a=c$ height, halos are non-existent, which suggests that the power enhancement is wholly dependent on returning fast waves. We also reproduce some of the observed halo properties, such as a dual 6 and 8 mHz enhancement structure and a spatial spreading of the halo with height.
△ Less
Submitted 5 January, 2015;
originally announced January 2015.
-
Centre-to-limb spectro-polarimetric diagnostics of simulated solar photospheric magneto-convection: signatures of photospheric Alfven waves
Authors:
S. Shelyag,
D. Przybylski
Abstract:
Using numerical simulations of the magnetised solar photosphere carried out with the radiative magneto-hydrodynamic code, MURaM, and detailed spectro-polarimetric diagnostics of the simulated photospheric 6302A FeI line, spectro-polarimetric signatures of Alfven waves in magnetised intergranular lanes of the simulated solar photosphere were analysed at different positions at the solar disk. The to…
▽ More
Using numerical simulations of the magnetised solar photosphere carried out with the radiative magneto-hydrodynamic code, MURaM, and detailed spectro-polarimetric diagnostics of the simulated photospheric 6302A FeI line, spectro-polarimetric signatures of Alfven waves in magnetised intergranular lanes of the simulated solar photosphere were analysed at different positions at the solar disk. The torsional Alfven waves in the intergranular lanes are horizontal plasma motions, which do not have a thermal perturbation counterpart. We find signatures of Alfven waves as small-scale line profile Doppler shifts and Stokes-V area asymmetry enhancements in the simulated off-disk centre observations. These photospheric features disappear when the simulated observations are degraded with a telescope PSF similar to the one of Hinode. We analyse the possibilities for direct observations and confirmation of Alfven wave presence in the solar photosphere.
△ Less
Submitted 22 May, 2014;
originally announced May 2014.
-
Assemblathon 2: evaluating de novo methods of genome assembly in three vertebrate species
Authors:
Keith R. Bradnam,
Joseph N. Fass,
Anton Alexandrov,
Paul Baranay,
Michael Bechner,
İnanç Birol,
Sébastien Boisvert,
Jarrod A. Chapman,
Guillaume Chapuis,
Rayan Chikhi,
Hamidreza Chitsaz,
Wen-Chi Chou,
Jacques Corbeil,
Cristian Del Fabbro,
T. Roderick Docking,
Richard Durbin,
Dent Earl,
Scott Emrich,
Pavel Fedotov,
Nuno A. Fonseca,
Ganeshkumar Ganapathy,
Richard A. Gibbs,
Sante Gnerre,
Élénie Godzaridis,
Steve Goldstein
, et al. (66 additional authors not shown)
Abstract:
Background - The process of generating raw genome sequence data continues to become cheaper, faster, and more accurate. However, assembly of such data into high-quality, finished genome sequences remains challenging. Many genome assembly tools are available, but they differ greatly in terms of their performance (speed, scalability, hardware requirements, acceptance of newer read technologies) and…
▽ More
Background - The process of generating raw genome sequence data continues to become cheaper, faster, and more accurate. However, assembly of such data into high-quality, finished genome sequences remains challenging. Many genome assembly tools are available, but they differ greatly in terms of their performance (speed, scalability, hardware requirements, acceptance of newer read technologies) and in their final output (composition of assembled sequence). More importantly, it remains largely unclear how to best assess the quality of assembled genome sequences. The Assemblathon competitions are intended to assess current state-of-the-art methods in genome assembly. Results - In Assemblathon 2, we provided a variety of sequence data to be assembled for three vertebrate species (a bird, a fish, and snake). This resulted in a total of 43 submitted assemblies from 21 participating teams. We evaluated these assemblies using a combination of optical map data, Fosmid sequences, and several statistical methods. From over 100 different metrics, we chose ten key measures by which to assess the overall quality of the assemblies. Conclusions - Many current genome assemblers produced useful assemblies, containing a significant representation of their genes, regulatory sequences, and overall genome structure. However, the high degree of variability between the entries suggests that there is still much room for improvement in the field of genome assembly and that approaches which work well in assembling the genome of one species may not necessarily work well for another.
△ Less
Submitted 27 June, 2013; v1 submitted 23 January, 2013;
originally announced January 2013.
