-
Low frequency noise in nanoparticle-molecule networks and implications for in-materio reservoir computing
Authors:
Cécile Huez,
David Guérin,
Florence Volatron,
Anna Proust,
Dominique Vuillaume
Abstract:
We study the low-frequency noise (LFN), i.e. flicker noise, also referred to as 1/f noise, in 2D networks of molecularly functionalized gold nanoparticles (NMN: nanoparticle-molecule network). We examine the noise behaviors of the NMN hosting alkyl chains (octanethiol), fatty acid oleic acids (oleylamine), redox molecule switches (polyoxometalate derivatives) or photo-isomerizable molecules (azobe…
▽ More
We study the low-frequency noise (LFN), i.e. flicker noise, also referred to as 1/f noise, in 2D networks of molecularly functionalized gold nanoparticles (NMN: nanoparticle-molecule network). We examine the noise behaviors of the NMN hosting alkyl chains (octanethiol), fatty acid oleic acids (oleylamine), redox molecule switches (polyoxometalate derivatives) or photo-isomerizable molecules (azobenzene derivatives) and we compare their 1/f noise behaviors. These noise metrics are used to evaluate which molecules are the best candidates to build in-materio reservoir computing molecular devices based on NMNs.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Highly Conductive Tungsten Suboxide Nanotubes
Authors:
Cécile Huez,
Maxime Berthe,
Florence Volatron,
Jean-Michel Guigner,
Dalil Brouri,
Lise-Marie Chamoreau,
Benoît Baptiste,
Anna Proust,
Dominique Vuillaume
Abstract:
We demonstrate a high electron conductivity (> 10^2 S/cm and up to 10^3 S/cm) of tungsten suboxide W18O(52.4-52.9)(or equivalently WO(2.91-2.94)) nanotubes (2 to 3 nm in diameter, ca. micrometer long). The conductivity is measured in the temperature range 120 to 300K by a four probe scanning tunneling microscope in ultra high vacuum. The nanotubes are synthesized by a low temperature and low cost…
▽ More
We demonstrate a high electron conductivity (> 10^2 S/cm and up to 10^3 S/cm) of tungsten suboxide W18O(52.4-52.9)(or equivalently WO(2.91-2.94)) nanotubes (2 to 3 nm in diameter, ca. micrometer long). The conductivity is measured in the temperature range 120 to 300K by a four probe scanning tunneling microscope in ultra high vacuum. The nanotubes are synthesized by a low temperature and low cost solvothermal method. They selfassemble in bundles of hundreds of nanotubes forming nanowires (ca. micrometer long, few tens nm wide). We observe a large anisotropy of the conductivity with a ratio (longitudinal conductivity/perpendicular conductivity) of ca. 10^5. A large fraction of them (ca. 65 to 95%) shows a metallic like, thermal activation less, electron transport behavior. Few of them, with a lower conductivity from 10 to 10^2 S/cm, display a variable range hop** behavior. In this latter case, a hop** barrier energy of ca. 0.24 eV is inferred in agreement with the calculated energy level of the oxygen vacancy below the conduction band. This result is in agreement with a relative average concentration of oxygen vacancies of ca. 3%, for which a semiconductor to metal transition was theoretically predicted. These tungsten suboxide nanostructures are prone to a wide range of applications in nanoelectronics.
△ Less
Submitted 8 September, 2023; v1 submitted 5 August, 2023;
originally announced August 2023.
-
Experimental observation of the role of countercations on the electrical conductance of Preyssler-type polyoxometalate nanodevices
Authors:
Cécile Huez,
Séverine Renaudineau,
Florence Volatron,
Anna Proust,
Dominique Vuillaume
Abstract:
Polyoxometalates are nanoscale molecular oxides with promising properties that are currently explored for molecule-based memory devices. In this work, we synthesize a series of Preyssler polyoxometalates (POMs), (Na-P5W30O110)14-,stabilized with four different counterions, H+, K+, NH4+ and tetrabutylammonium (TBA+), and we study the electron transport properties at the nanoscale (conductive atomic…
▽ More
Polyoxometalates are nanoscale molecular oxides with promising properties that are currently explored for molecule-based memory devices. In this work, we synthesize a series of Preyssler polyoxometalates (POMs), (Na-P5W30O110)14-,stabilized with four different counterions, H+, K+, NH4+ and tetrabutylammonium (TBA+), and we study the electron transport properties at the nanoscale (conductive atomic force microscopy, C-AFM) of molecular junctions formed by self-assembled monolayers (SAMs) of POMs electrostatically deposited on ultraflat gold surface prefunctionalized with a positively charged SAM of amine-terminated alkylthiol chains. We report that the electron transport properties of P5W30-based molecular junctions depend on the nature of the counterions, the low-bias current (in the voltage range -0.6 V to 0.6 V) gradually increasing by a factor ca. 100 by changing the counterion in the order K+, NH4+, H+ and TBA+. From a statistical study (hundreds of current-voltage traces) using a simple analytical model for charge transport in nanoscale devices, we show that the energy position of the lowest unoccupied molecular orbital (LUMO) of the P5W30 with respect of the Fermi energy of the electrodes increases from ca. 0.4 eV to 0.7 eV and that that electrode coupling energy also increases from ca. 0.05 to 1 meV in the same order from K+, NH4+, H+ to TBA+. We discuss several hypotheses on the possible origin of these features, such as a counterion-dependent dipole at the POM/electrode interface and counterion-modulated molecule/electrode hybridization, with, in both cases, the largest effect in the case of TBA+ counterions.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Redox-controlled conductance of polyoxometalate molecular junctions
Authors:
Cécile Huez,
David Guérin,
Stéphane Lenfant,
Florence Volatron,
Michel Calame,
Mickael L. Perrin,
Anna Proust,
Dominique Vuillaume
Abstract:
We demonstrate the reversible in situ photoreduction of molecular junctions of phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ca. 10, this open-shell state is stable in the junction in air at room temperature. The…
▽ More
We demonstrate the reversible in situ photoreduction of molecular junctions of phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ca. 10, this open-shell state is stable in the junction in air at room temperature. The analysis of a large current-voltage dataset by unsupervised machine learning and clustering algorithms reveals that the electron transport in the pristine phosphomolybdate junctions leads to symmetric current-voltage curves, controlled by the lowest unoccupied molecular orbital (LUMO) at 0.6 - 0.7 eV above the Fermi energy with ca. 25% of the junctions having a better electronic coupling to the electrodes than the main part of the dataset. This analysis also shows that a small fraction (ca. 18% of the dataset) of the molecules is already reduced. The UV light in situ photoreduced phosphomolybdate junctions are systematically featuring slightly asymmetric current - voltage behaviors, which is ascribed to electron transport mediated by the single occupied molecular orbital (SOMO) nearly at resonance with the Fermi energy of the electrode and by a closely located single unoccupied molecular orbital (SUMO) at ca. 0.3 eV above the SOMO with a weak electronic coupling to the electrodes (ca. 50% of the dataset) or at ca. 0.4 eV but with a better electrode coupling (ca. 50% of the dataset). These results shed lights to the electronic properties of reversible switchable redox polyoxometalates, a key point for potential applications in nanoelectronic devices.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Covalent Grafting of Polyoxometalate Hybrids onto Flat Silicon/Silicon Oxide: Insights from POMs Layers on Oxides
Authors:
Maxime Laurans,
Kelly Trinh,
Kevin Dalla Francesca,
Guillaume Izzet,
Sandra Alves,
Etienne Derat,
Vincent Humblot,
Olivier Pluchery,
Dominique Vuillaume,
Stéphane Lenfant,
Florence Volatron,
Anna Proust
Abstract:
Immobilization of polyoxometalates (POMs) onto oxides is relevant to many applications in the fields of catalysis, energy conversion/storage or molecular electronics. Optimization and understanding the molecule/oxide interface is crucial to rationally improve the performance of the final molecular materials. We herein describe the synthesis and covalent grafting of POM hybrids with remote carboxyl…
▽ More
Immobilization of polyoxometalates (POMs) onto oxides is relevant to many applications in the fields of catalysis, energy conversion/storage or molecular electronics. Optimization and understanding the molecule/oxide interface is crucial to rationally improve the performance of the final molecular materials. We herein describe the synthesis and covalent grafting of POM hybrids with remote carboxylic acid functions onto flat Si/SiO2 substrates. Special attention has been paid to the characterization of the molecular layer and to the description of the POM anchoring mode at the oxide interface through the use of various characterization techniques, including ellipsometry, AFM, XPS and FTIR. Finally, electron transport properties were probed in a vertical junction configuration and energy level diagrams have been drawn and discussed in relation with the POM molecular electronic features inferred from cyclic-voltammetry, UV-visible absorption spectra and theoretical calculations. The electronic properties of these POM-based molecular junctions are driven by the POM LUMO (d-orbitals) whatever the nature of the tether or the anchoring group.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Charge transport through redox active [H7P8W48O184]33- polyoxometalates self-assembled onto gold surfaces and gold nanodots
Authors:
K. Dalla Francesca,
S. Lenfant,
M. Laurans,
F. Volatron,
G. Izzet,
V. Humblot,
C. Methivier,
D. Guerin,
A. Proust,
D. Vuillaume
Abstract:
Polyoxometalates (POMs) are redox-active molecular oxides, which attract growing interest for their integration into nano-devices, such as high-density data storage non-volatile memories. In this work, we investigated the electrostatic deposition of the negatively charged [H7P8W48O184]33- POM onto positively charged 8-amino-1-octanethiol self-assembled monolayers (SAMs) preformed onto gold substra…
▽ More
Polyoxometalates (POMs) are redox-active molecular oxides, which attract growing interest for their integration into nano-devices, such as high-density data storage non-volatile memories. In this work, we investigated the electrostatic deposition of the negatively charged [H7P8W48O184]33- POM onto positively charged 8-amino-1-octanethiol self-assembled monolayers (SAMs) preformed onto gold substrates or onto an array of gold nanodots. The ring-shaped [H7P8W48O184]33- POM was selected as an example of large POMs with high charge storage capacity. To avoid the formation of POM aggregates onto the substrates, which would introduce variability in the local electrical properties, special attention has to be paid to the preformed SAM seeding layer, which should itself be deprived of aggregates. Where necessary, rinsing steps were found to be crucial to eliminate these aggregates and to provide uniformly covered substrates for subsequent POM deposition and electrical characterizations. This especially holds for commercially available gold/glass substrates while these rinsing steps were not essential in the case of template stripped gold of very low roughness. Charge transport through the related molecular junctions and nanodot molecule junctions (NMJs) has been probed by conducting-AFM. We analyzed the current-voltage curves with different models: electron tunneling though the SAMs (Simmons model), transition voltage spectroscopy (TVS) method or molecular single energy level mediated transport (Landauer equation) and we discussed the energetics of the molecular junctions. We concluded to an energy level alignment of the alkyl spacer and POM lowest occupied molecular orbitals (LUMOs), probably due to dipolar effects.
△ Less
Submitted 22 February, 2019;
originally announced April 2019.
-
Transport and Phototransport in ITO Nanocrystals with Short to Long-Wave Infrared Absorption
Authors:
Junling Qu,
Clément Livache,
Bertille Martinez,
Charlie Gréboval,
Audrey Chu,
Elisa Meriggio,
Julien Ramade,
Hervé Cruguel,
Xiang Zhen Xu,
Anna Proust,
Florence Volatron,
Grégory Cabailh,
Nicolas Goubet,
Emmanuel Lhuillier
Abstract:
Nanocrystals are often described as an interesting strategy for the design of low-cost optoelectronic devices especially in the infrared range. However the driving materials reaching infrared absorption are generally heavy metalcontaining (Pb and Hg) with a high toxicity. An alternative strategy to achieve infrared transition is the use of doped semiconductors presenting intraband or plasmonic tra…
▽ More
Nanocrystals are often described as an interesting strategy for the design of low-cost optoelectronic devices especially in the infrared range. However the driving materials reaching infrared absorption are generally heavy metalcontaining (Pb and Hg) with a high toxicity. An alternative strategy to achieve infrared transition is the use of doped semiconductors presenting intraband or plasmonic transition in the short, mid and long-wave infrared. This strategy may offer more flexibility regarding the range of possible candidate materials. In particular, significant progresses have been achieved for the synthesis of doped oxides and for the control of their do** magnitude. Among them, tin doped indium oxide (ITO) is the one providing the broadest spectral tunability. Here we test the potential of such ITO nanoparticles for photoconduction in the infrared. We demonstrate that In2O3 nanoparticles presents an intraband absorption in the mid infrared range which is transformed into a plasmonic feature as do** is introduced. We have determined the cross section associated with the plasmonic transition to be in the 1-3x10-13 cm2 range. We have observed that the nanocrystals can be made conductive and photoconductive due to a ligand exchange using a short carboxylic acid, leading to a dark conduction with n-type character. We bring further evidence that the observed photoresponse in the infrared is the result of a bolometric effect.
△ Less
Submitted 2 January, 2019;
originally announced March 2019.
-
Breaking molecular nitrogen under mild conditions with an atomically clean lanthanide surface
Authors:
Felicia Ullstad,
Gabriel Bioletti,
Jay Chan,
Audrey Proust,
Charlotte Bodin,
Ben J. Ruck,
H. Joe Trodahl,
Franck Natali
Abstract:
A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a partial N2 atmosphere at room temperature and pressure as low as 10-4 Torr, is confirmed using X-ray diffraction. In-situ conductance measurements of pure lanthanid…
▽ More
A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a partial N2 atmosphere at room temperature and pressure as low as 10-4 Torr, is confirmed using X-ray diffraction. In-situ conductance measurements of pure lanthanide thin films exposed to N2 gas show an immediate surface reaction and a slower bulk reaction. Finally, we report partial reversal of the nitrogen incorporation in a lanthanide nitride by cycling vacuum and nitrogen conditions in the sample chamber.A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a partial N2 atmosphere at room temperature and pressure as low as 10-4 Torr, is confirmed using X-ray diffraction. Insitu conductance measurements of pure lanthanide thin films exposed to N2 gas show an immediate surface reaction and a slower bulk reaction. Finally, we report partial reversal of the nitrogen incorporation in a lanthanide nitride by cycling vacuum and nitrogen conditions in the sample chamber.
△ Less
Submitted 17 December, 2018;
originally announced December 2018.
-
Molecular Signature of Polyoxometalates in Electron Transport of Silicon-based Molecular Junctions
Authors:
Maxime Laurans,
Kevin Dalla Francesca,
Florence Volatron,
Guillaume Izzet,
David Guerin,
Dominique Vuillaume,
Stephane Lenfant,
Anna Proust
Abstract:
Polyoxometalates (POMs) are unconventional electro-active molecules with a great potential for applications in molecular memories, providing efficient processing steps onto electrodes are available. The synthesis of the organic-inorganic polyoxometalate hybrids [PM$_{11}$O$_{39}$(Sn(C$_6$H$_4$)C$\equiv$C(C$_6$H$_4$)N$_2$)]$^{3-}$ (M = Mo, W) endowed with a remote diazonium function is reported tog…
▽ More
Polyoxometalates (POMs) are unconventional electro-active molecules with a great potential for applications in molecular memories, providing efficient processing steps onto electrodes are available. The synthesis of the organic-inorganic polyoxometalate hybrids [PM$_{11}$O$_{39}$(Sn(C$_6$H$_4$)C$\equiv$C(C$_6$H$_4$)N$_2$)]$^{3-}$ (M = Mo, W) endowed with a remote diazonium function is reported together with their covalent immobilization onto hydrogenated n-Si(100) substrates. Electron transport measurements through the resulting densely-packed monolayers contacted with a mercury drop as a top electrode confirms their homogeneity. Adjustment of the current-voltage curves with the Simmons equation gives a mean tunnel energy barrier of 1.8 eV and 1.6 eV, for the Silicon-Molecules-Metal (SMM) junctions based on the polyoxotungstates (M = W) and polyoxomolybdates (M = Mo), respectively. This follows the trend observed in the electrochemical properties of POMs in solution, the polyoxomolybdates being easier to reduce than the polyoxotungstates, in agreement with lowest unoccupied molecular orbitals (LUMOs) of lower energy. The molecular signature of the POMs is thus clearly identifiable in the solid-state electrical properties and the unmatched diversity of POM molecular and electronic structures should offer a great modularity.
△ Less
Submitted 3 September, 2018;
originally announced September 2018.
-
Enhancement of photovoltaic efficiency by insertion of a polyoxometalate layer at the anode of an organic solar cell
Authors:
M. Alaaeddine,
Q. Zhu,
D. Fichou,
G. Izzet,
J. E. Rault,
N. Barrett,
A. Proust,
L. Tortech
Abstract:
In this article the Wells-Dawson polyoxometalate K6[P2W18O62] is grown as an interfacial layer between indium tin oxide and bulk heterojunction of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). The structure of the POM layers depends on the thickness and shows a highly anisotropic surface organization. The films have been characterized by atomic force microsco…
▽ More
In this article the Wells-Dawson polyoxometalate K6[P2W18O62] is grown as an interfacial layer between indium tin oxide and bulk heterojunction of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). The structure of the POM layers depends on the thickness and shows a highly anisotropic surface organization. The films have been characterized by atomic force microscopy and X-ray photoelectron spectroscopy (XPS) to gain insight into their macroscopic organization and better understand their electronic properties. Then, they were put at the anodic interface of a P3HT:PCBM organic solar cell and characterized on an optical bench. The photovoltaic efficiency is discussed in terms of the benefit of the polyoxometalate at the anodic interface of an organic photovoltaic cell.
△ Less
Submitted 7 June, 2018;
originally announced June 2018.
