Showing 1–32 of 32 results for author: Pronskikh, V

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

An 8 GEV Linac As The Booster Replacement In The Fermilab Power Upgrade

Authors: D. Neuffer, S. Belomestnykh, M. Checchin, D. Johnson, S. Posen, E. Pozdeyev, V. Pronskikh, A. Saini, N. Solyak, V. Yakovlev

Abstract: Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Earlier, rapid-cycling synchrotron and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H- beam for injection into the Recycler Ring (RR) or MI The new linac takes ~1 GeV beam from the PIP-… ▽ More Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Earlier, rapid-cycling synchrotron and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H- beam for injection into the Recycler Ring (RR) or MI The new linac takes ~1 GeV beam from the PIP-II linac and accelerates it to ~ 2 GeV in a 650 MHz SRF linac, and then accelerates to ~8 GeV in an SRF pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. This Booster Replacement linac (BRL) will increase MI beam power to DUNE to more than 2.5 MW and enable next-generation intensity frontier experiments. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: arXiv admin note: text overlap with arXiv:2203.05052

Report number: FERMILAB-CONF-22-617-AD-TD

Cascade Models in Simulation of Extended Heavy Targets Irradiated by Accelerated Proton and Deuteron Beams

Authors: M. Baznat, A. Baldin, E. Baldina, M. Paraipan, V. Pronskikh, P. Zhivkov

Abstract: The paper presents a survey of the main numerical models used for simulation of interaction of accelerated particle beams with target nuclei. These models form the core of the software for simulation of various experiments and experimental facilities both for scientific and applied purposes. The beam and target parameters considered in detail in this study (protons and deuterons with energies from… ▽ More The paper presents a survey of the main numerical models used for simulation of interaction of accelerated particle beams with target nuclei. These models form the core of the software for simulation of various experiments and experimental facilities both for scientific and applied purposes. The beam and target parameters considered in detail in this study (protons and deuterons with energies from 0.66 to 4 AGeV and bulk U targets) cover the range of interest in development of new concepts of nuclear power production aided by accelerated particle beams. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Report number: FERMILAB-PUB-22-319-AD

Climate of the Field: Snowmass 2021

Authors: Erin V. Hansen, Erica Smith, Deborah Bard, Matthew Bellis, Jessica Esquivel, Tiffany R. Lewis, Cameron Geddes, Cindy Joe, Alex G. Kim, Asmita Patel, Vitaly Pronskikh

Abstract: How are formal policies put in place to create an inclusive, equitable, safe environment? How do these differ between different communities of practice (institutions, labs, collaborations, working groups)? What policies towards a more equitable community are working? For those that aren't working, what external support is needed in order to make them more effective? We present a discussion of the… ▽ More How are formal policies put in place to create an inclusive, equitable, safe environment? How do these differ between different communities of practice (institutions, labs, collaborations, working groups)? What policies towards a more equitable community are working? For those that aren't working, what external support is needed in order to make them more effective? We present a discussion of the current climate of the field in high energy particle physics and astrophysics (HEPA), as well as current efforts toward making the community a more diverse, inclusive, and equitable environment. We also present issues facing both institutions and HEPA collaborations, with a set of interviews with a selection of HEPA collaboration DEI leaders. We encourage the HEPA community and the institutions & agencies that support it to think critically about the prioritization of people in HEPA over the coming decade, and what resources and policies need to be in place in order to protect and elevate minoritized populations within the HEPA community. △ Less

Submitted 29 September, 2022; v1 submitted 7 April, 2022; originally announced April 2022.

Comments: Contribution to Snowmass 2021. New version with endorsers

Novel Materials and Concepts for Next-Generation High Power Target Applications

Authors: Kavin Ammigan, Sujit Bidhar, Frederique Pellemoine, Vitaly Pronskikh, David Pushka, Katsuya Yonehara, Robert Zwaska, Adrien Couet, Michael Moorehead, Taku Ishida, Shunsuke Makimura, Christopher Densham, Michael Fitton, Eric Harvey-Fishenden, Tristan Davenne, David Jenkins, Peter Loveridge, Joe O'Dell, Chris Rogers, Dan Wilcox, Marco Calviani, Simone Gilardoni, Francois-Xavier Nuiry, Antonio Perillo-Marcone, Nathan Bultman , et al. (14 additional authors not shown)

Abstract: Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia… ▽ More Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Report number: FERMILAB-CONF-22-139-AD

A New Charged Lepton Flavor Violation Program at Fermilab

Authors: M. Aoki, R. B. Appleby, M. Aslaninejad, R. Barlow, R. H. Bernstein, C. Bloise, L. Calibbi, F. Cervelli, R. Culbertson, Andre Luiz de Gouvea, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, A. Gaponenko, S. Giovannella, C. Group, F. Happacher, M. T. Hedges, D. G. Hitlin, E. Hungerford, C. Johnstone, D. M. Kaplan, M. Kargiantoulakis , et al. (43 additional authors not shown)

Abstract: The muon has played a central role in establishing the Standard Model of particle physics, and continues to provide valuable information about the nature of new physics. A new complex at Fermilab, the Advanced Muon Facility, would provide the world's most intense positive and negative muon beams by exploiting the full potential of PIP-II and the Booster upgrade. This facility would enable a broad… ▽ More The muon has played a central role in establishing the Standard Model of particle physics, and continues to provide valuable information about the nature of new physics. A new complex at Fermilab, the Advanced Muon Facility, would provide the world's most intense positive and negative muon beams by exploiting the full potential of PIP-II and the Booster upgrade. This facility would enable a broad muon physics program, including studies of charged lepton flavor violation, muonium-antimuonium transitions, a storage ring muon EDM experiment, and muon spin rotation experiments. This document describes a staged realization of this complex, together with a series of next-generation experiments to search for charged lepton flavor violation. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: A Contributed Paper for Snowmass 2021

Mu2e-II: Muon to electron conversion with PIP-II

Authors: K. Byrum, S. Corrodi, Y. Oksuzian, P. Winter, L. Xia, A. W. J. Edmonds, J. P. Miller, J. Mott, W. J. Marciano, R. Szafron, R. Bonventre, D. N. Brown, Yu. G. Kolomensky, O. Ning, V. Singh, E. Prebys, L. Borrel, B. Echenard, D. G. Hitlin, C. Hu, D. X. Lin, S. Middleton, F. C. Porter, L. Zhang, R. -Y. Zhu , et al. (83 additional authors not shown)

Abstract: An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for exa… ▽ More An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for examining the process on additional target materials. Mu2e-II is a proposed upgrade to Mu2e, with at least an additional order of magnitude in sensitivity to the conversion rate over Mu2e. The approach and challenges for this proposal are summarized. Mu2e-II may be regarded as the next logical step in a continued high-intensity muon program at FNAL. △ Less

Submitted 16 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 46 pages 43 figures 7 tables

Report number: 20220310: [CONF-22-123]

An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade: a Snowmass 2021 White Paper

Authors: S. Belomestnykh, M. Checchin, D. Johnson, D. Neuffer, H. Padamsee, S. Posen, E. Pozdeyev, V. Pronskikh, A. Saini, N. Solyak, V. Yakovlev

Abstract: Following the PIP-II 800 MeV Linac, Fermilab will need an accelerator that extends from that linac to the MI injection energy of ~8 GeV, completing the modernization of the Fermilab high-intensity accelerator complex. This will maximize the beam available for neutrino production for the long baseline DUNE experiment to greater than 2.5 MW and enable a next generation of intensity frontier experime… ▽ More Following the PIP-II 800 MeV Linac, Fermilab will need an accelerator that extends from that linac to the MI injection energy of ~8 GeV, completing the modernization of the Fermilab high-intensity accelerator complex. This will maximize the beam available for neutrino production for the long baseline DUNE experiment to greater than 2.5 MW and enable a next generation of intensity frontier experiments. In this white paper, we propose an 8 GeV Linac for that purpose. The Linac consists of an extension of the PIP-II Linac to ~2 GeV using PIP-II 650 MHz SRF cryomodules, followed by a 2 -->8.0 GeV Linac composed of 1300 MHz SRF cryomodules, based upon the LCLS-II cryomodules developed at Fermilab. The 8 GeV Linac will incorporate recent improvements in SRF technology. The research needed to implement this Linac is described. △ Less

Submitted 2 June, 2023; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Model uncertainty in accelerator application simulations

Authors: Vitaly Pronskikh

Abstract: Monte-Carlo nuclear reaction and transport codes are widely used to devise accelerator-based nuclear physics experiments; at the same time, many experiments are performed to validate the Monte-Carlo codes, which can be used for the design of full-scale nuclear power applications or the design of new benchmark experiments. Dedicated model benchmark studies investigate a broad range of nuclear react… ▽ More Monte-Carlo nuclear reaction and transport codes are widely used to devise accelerator-based nuclear physics experiments; at the same time, many experiments are performed to validate the Monte-Carlo codes, which can be used for the design of full-scale nuclear power applications or the design of new benchmark experiments. Dedicated model benchmark studies investigate a broad range of nuclear reactions and quantities. Examples of these include isotope formation or secondary particle fluxes that result from the interactions of GeV-range hadrons with monoisotopic targets, which can be used to assess the respective systematic uncertainty of models. Such benchmark studies, as well as many nuclear application experiments and simulations carried out by various groups over the last few decades, enable us to draw methodological lessons. In this work, model uncertainty determined based on available experimental data allow us to identify the effects of practitioner expertise as well as the design of codes (user access to micro-scale parameters) on the range of uncertainties. We found that in cases when simulations are performed by code developers or users that are very experienced in performing simulations, the model to experiment quantity ratios generally agree with the limits determined by dedicated benchmark studies. In other cases, the ratios generally tend to be either smaller (underestimation of model error) or larger (overestimation of model error). A plausible explanation of the aforementioned effects is suggested. △ Less

Submitted 24 November, 2020; originally announced December 2020.

Report number: FERMILAB-PUB-20-273-AD

Journal ref: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 977:164299, 2020

Simulation as a sustainable trading zone: Aiming at intergenerational justice

Authors: Vitaly Pronskikh

Abstract: The paper, drawing on the example of simulation codes used in nuclear physics and high-energy physics, seeks to highlight the ethical implications of discontinuing support for simulation codes and the loss of knowledge embodied in them. Predicated on the concept of trading zones and actor network models, the paper addresses the problem of extinction of simulation codes and attempts to understand t… ▽ More The paper, drawing on the example of simulation codes used in nuclear physics and high-energy physics, seeks to highlight the ethical implications of discontinuing support for simulation codes and the loss of knowledge embodied in them. Predicated on the concept of trading zones and actor network models, the paper addresses the problem of extinction of simulation codes and attempts to understand their evolution and development within those frameworks. We show that simulation codes of closed type develop to the level of creoles, becoming local languages and standards of scientific centers and disappearing as their few main developers leave, whereas codes of open types become universal languages, imposing problem-solving patterns on the entire community and crowding out other codes. The paper suggests that because of simulations' reliance on tacit knowledge, practices entrenched in codes cannot be exhaustively explicated or transmitted through writing alone; on the contrary, the life cycle of a simulation code is determined by the life cycle of its trading zone. We examine the extent to which both of these phenomena pose a risk to the preservation of knowledge. Bearing upon intergenerational ethics, we draw analogies between the pure intergenerational problem (PIP) and the problem of preserving the knowledge implemented in simulation codes and transmitting it to future generations. We argue that for the complete transfer of knowledge, it is necessary to develop and maintain inhabitability and sustainability of simulation trading zones in a controllable way, at least until the demand for these codes is warranted to cease in the future. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Comments: SIMULATION. August 2020

Report number: FERMILAB-PUB-20-279

Expression of Interest for Evolution of the Mu2e Experiment

Authors: F. Abusalma, D. Ambrose, A. Artikov, R. Bernstein, G. C. Blazey, C. Bloise, S. Boi, T. Bolton, J. Bono, R. Bonventre, D. Bowring, D. Brown, D. Brown, K. Byrum, M. Campbell, J. -F. Caron, F. Cervelli, D. Chokheli, K. Ciampa, R. Ciolini, R. Coleman, D. Cronin-Hennessy, R. Culbertson, M. A. Cummings, A. Daniel , et al. (103 additional authors not shown)

Abstract: We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the fores… ▽ More We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the foreseeable future. Mu2e-II will use as much of the Mu2e infrastructure as possible, providing, where required, improvements to the Mu2e apparatus to accommodate the increased beam intensity and cope with the accompanying increase in backgrounds. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: 17 pages, 4 figures, 1 table; Submitted to the Fermilab Physics Advisory Committee

Report number: Fermilab-FN-1052

Mu2e upgrade physics reach optimization studies for the PIP-II era

Authors: V. Pronskikh, D. Glenzinski, N. Mokhov, R. Tschirhart

Abstract: The Mu2e experiment at Fermilab is being designed to study the coherent neutrino-less conversion of a negative muon into an electron in the field of a nucleus. This process has an extremely low probability in the Standard Model and its observation would provide unambiguous evidence for BSM physics. The Mu2e design aims to reach a single-event-sensitivity of about $2.5 \times 10^{17}$ and will prob… ▽ More The Mu2e experiment at Fermilab is being designed to study the coherent neutrino-less conversion of a negative muon into an electron in the field of a nucleus. This process has an extremely low probability in the Standard Model and its observation would provide unambiguous evidence for BSM physics. The Mu2e design aims to reach a single-event-sensitivity of about $2.5 \times 10^{17}$ and will probe effective new physics mass scales in the 103-104 TeV range, well beyond the reach of the LHC. This work examines the maximum beam power that can be tolerated for beam energies in the 0.5-8 GeV range exploring variations in the geometry in the region of the production target using the MARS15 code. This has implications for how the sensitivity might be further improved with a second generation experiment using an upgraded proton beam from the PIP-II project, which will be capable of providing MW beams to Fermilab experiments later in the next decade. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Comments: 6 pp. 38th International Conference on High Energy Physics, 3-10 August 2016, Chicago, USA. arXiv admin note: substantial text overlap with arXiv:1612.08931

Report number: Fermilab-Conf-16-682-APC-PPD

Study of secondary neutron interactions with $^{232}$Th, $^{129}$I, and $^{127}$I nuclei with the uranium assembly "QUINTA" at 2, 4, and 8 GeV deuteron beams of the JINR Nuclotron accelerator

Authors: J. Adam, V. V. Chilap, V. I. Furman, M. G. Kadykov, J. Khushvaktov, V. S. Pronskikh, A. A. Solnyshkin, V. I. Stegailov, M. Suchopar, V. M. Tsoupko-Sitnikov, S. I. Tyutyunnikov, J. Vrzalova, V. Wagner, L. Zavorka

Abstract: The natural uranium assembly, "QUINTA", was irradiated with 2, 4, and 8 GeV deuterons. The $^{232}$Th, $^{127}$I, and $^{129}$I samples have been exposed to secondary neutrons produced in the assembly at a 20-cm radial distance from the deuteron beam axis. The spectra of gamma rays emitted by the activated $^{232}$Th, $^{127}$I, and $^{129}$I samples have been analyzed and several tens of product… ▽ More The natural uranium assembly, "QUINTA", was irradiated with 2, 4, and 8 GeV deuterons. The $^{232}$Th, $^{127}$I, and $^{129}$I samples have been exposed to secondary neutrons produced in the assembly at a 20-cm radial distance from the deuteron beam axis. The spectra of gamma rays emitted by the activated $^{232}$Th, $^{127}$I, and $^{129}$I samples have been analyzed and several tens of product nuclei have been identified. For each of those products, neutron-induced reaction rates have been determined. The transmutation power for the $^{129}$I samples is estimated. Experimental results were compared to those calculated with well-known stochastic and deterministic codes. △ Less

Submitted 3 May, 2017; originally announced May 2017.

Comments: 25 pp

Report number: Fermilab-Pub-16-215-APC

A Study Of The Energy Dependence Of Radiation Damage In Superconducting Coils For a Next Generation Mu2e At PIP-II

Authors: V. Pronskikh, D. Glenzinski, K. Knoepfel, N. Mokhov, R. Tschirhart

Abstract: The Mu2e experiment at Fermilab is being designed to study the coherent neutrino-less conversion of a negative muon into an electron in the field of a nucleus. This process has an extremely low probability in the Standard Model, and its observation would provide unambiguous evidence for beyond the standard model physics. The Mu2e design aims to reach a single-event-sensitivity of about… ▽ More The Mu2e experiment at Fermilab is being designed to study the coherent neutrino-less conversion of a negative muon into an electron in the field of a nucleus. This process has an extremely low probability in the Standard Model, and its observation would provide unambiguous evidence for beyond the standard model physics. The Mu2e design aims to reach a single-event-sensitivity of about $2.5 \times 10^{-17}$ and will probe effective new physics mass scales in the 103-104 TeV range, well beyond the reach of the LHC. This work will examine the maximum beam power that can be tolerated for beam energies in the 0.5-8 GeV range. This has implications for how the sensitivity might be further improved with a second generation experiment using an upgraded proton beam from the PIP-II project, which will be capable of providing MW beams to Fermilab experiments later in the next decade. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: 16 pp. Presented at the Radiation Effects in Superconducting Magnet Materials (RESMM'15) Workshop, FRIB, East Lansing, Michigan, May 2015

Report number: Fermilab-Conf-16-095-APC-E

The MARS15-based FermiCORD code system for calculation of the accelerator-induced residual dose

Authors: A. Grebe, A. Leveling, T. Lu, N. Mokhov, V. Pronskikh

Abstract: The FermiCORD code system, a set of codes based on MARS15 that calculates the accelerator-induced residual doses at experimental facilities of arbitrary configurations, has been developed. FermiCORD is written in C++ as an add-on to Fortran-based MARS15. The FermiCORD algorithm consists of two stages: 1) simulation of residual doses on contact with the surfaces surrounding the studied location and… ▽ More The FermiCORD code system, a set of codes based on MARS15 that calculates the accelerator-induced residual doses at experimental facilities of arbitrary configurations, has been developed. FermiCORD is written in C++ as an add-on to Fortran-based MARS15. The FermiCORD algorithm consists of two stages: 1) simulation of residual doses on contact with the surfaces surrounding the studied location and of radionuclide inventories in the structures surrounding those locations using MARS15, and 2) simulation of the emission of the nuclear decay $γ$-quanta by the residuals in the activated structures and scoring the prompt doses of these $γ$-quanta at arbitrary distances from those structures. The FermiCORD code system has been benchmarked against similar algorithms based on other code systems and against experimental data from the CERF facility at CERN, and FermiCORD showed reasonable agreement with these. The code system has been applied for calculation of the residual dose of the target station for the Mu2e experiment and the results have been compared to approximate dosimetric approaches. △ Less

Submitted 22 September, 2018; v1 submitted 1 September, 2016; originally announced September 2016.

Comments: Replaced with published version. Available under Creative Commons License CC-BY-NC-ND 4.0 (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Report number: Mu2e-doc-7238-v8

Journal ref: Nucl. Instr. Meth. A 877 (2018) 339-345

Activation Products from Copper and Steel Samples Exposed to Showers Produced by 8 GeV Protons Lost in the Fermilab Main Injector Collimation System

Authors: Bruce C. Brown, Nikolai V. Mokhov, Vitaly S. Pronskikh

Abstract: In conjunction with efforts to predict residual radiation levels in the Fermilab Main Injector, measurements of residual radiation were correlated with the time history of losses. Detailed examination suggested that the list of radioactive isotopes used for fitting was incomplete. We will report on activation studies of magnet steel and copper samples which we irradiated adjacent to the Fermilab M… ▽ More In conjunction with efforts to predict residual radiation levels in the Fermilab Main Injector, measurements of residual radiation were correlated with the time history of losses. Detailed examination suggested that the list of radioactive isotopes used for fitting was incomplete. We will report on activation studies of magnet steel and copper samples which we irradiated adjacent to the Fermilab Main Injector collimation system. Our results identified several additional radioactive isotopes of interest. The MARS15 studies using a simplified model are compared with measurements. The long half-life isotopes will grow in importance as operation stretches to a second decade and as loss rates rise. These studies allow us to predict limits on these concerns. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 9 pp

Report number: FERMILAB-CONF-14-178-AD-APC

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. Röhrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1

Beam-Induced Effects and Radiological Issues in High-Intensity High-Energy Fixed Target Experiments

Authors: N. V. Mokhov, S. R. Childress, A. I. Drozhdin, V. S. Pronskikh, D. Reitzner, I. S. Tropin, K. Vaziri

Abstract: The next generation of accelerators for Megawatt proton and heavy-ion beams moves us into a completely new domain of extreme specific energies of up to 0.1 MJ/g (Megajoule/gram) and specific power up to 1 TW/g (Terawatt/gram) in beam interactions with matter. This paper is focused on deleterious effects of controlled and uncontrolled impacts of high-intensity beams on components of beam-lines, tar… ▽ More The next generation of accelerators for Megawatt proton and heavy-ion beams moves us into a completely new domain of extreme specific energies of up to 0.1 MJ/g (Megajoule/gram) and specific power up to 1 TW/g (Terawatt/gram) in beam interactions with matter. This paper is focused on deleterious effects of controlled and uncontrolled impacts of high-intensity beams on components of beam-lines, target stations, beam absorbers, shielding and environment. Two new experiments at Fermilab are taken as an example. The Long-Baseline Neutrino Experiment (LBNE) will explore the interactions and transformations of the world's highest-intensity neutrino beam by sending it from Fermilab more than 1,000 kilometers through the Earth's mantle to a large liquid argon detector. The Mu2e experiment is devoted to studies of the conversion of a negative muon to electron in the field of a nucleus without emission of neutrinos. △ Less

Submitted 29 August, 2014; originally announced September 2014.

Comments: 6 p

Report number: FERMILAB-CONF-12-634-APC

MARS15 Code Developments Driven by the Intensity Frontier Needs

Authors: N. V. Mokhov, V. S. Pronskikh, I. L. Rakhno, S. I. Striganov, I. S. Tropin, Yu. I. Eidelman, P. Aarnio, K. K. Gudima, A. Yu. Konobeev

Abstract: The MARS15(2012) is the latest version of a multi-purpose Monte-Carlo code developed since 1974 for detailed simulation of hadronic and electromagnetic cascades in an arbitrary 3-D geometry of shielding, accelerator, detector and spacecraft components with energy ranging from a fraction of an electronvolt to 100 TeV. Driven by needs of the intensity frontier projects with their Megawatt beams, e.g… ▽ More The MARS15(2012) is the latest version of a multi-purpose Monte-Carlo code developed since 1974 for detailed simulation of hadronic and electromagnetic cascades in an arbitrary 3-D geometry of shielding, accelerator, detector and spacecraft components with energy ranging from a fraction of an electronvolt to 100 TeV. Driven by needs of the intensity frontier projects with their Megawatt beams, e.g., ESS, FAIR and Project X, the code has been recently substantially improved and extended. These include inclusive and exclusive particle event generators in the 0.7 to 12 GeV energy range, proton inelastic interaction modeling below 20 MeV, implementation of the EGS5 code for electromagnetic shower simulation at energies from 1 keV to 20 MeV, stop** power description in compound materials, new module for DPA calculations for neutrons from a fraction of eV to 20-150 MeV, user-friendly DeTra-based method to calculate nuclide inventories, and new ROOT-based geometry. △ Less

Submitted 29 August, 2014; originally announced September 2014.

Comments: 7 p

Report number: FERMILAB-CONF-12-635-APC

Energy Production Demonstrator for Megawatt Proton Beams

Authors: Vitaly S. Pronskikh, Nikolai Mokhov, Igor Novitski, Sergey I. Tyutyunnikov

Abstract: A preliminary study of the Energy Production Demonstrator (EPD) concept - a solid heavy metal target irradiated by GeV-range intense proton beams and producing more energy than consuming - is carried out. Neutron production, fission, energy deposition, energy gain, testing volume and helium production are simulated with the MARS15 code for tungsten, thorium, and natural uranium targets in the prot… ▽ More A preliminary study of the Energy Production Demonstrator (EPD) concept - a solid heavy metal target irradiated by GeV-range intense proton beams and producing more energy than consuming - is carried out. Neutron production, fission, energy deposition, energy gain, testing volume and helium production are simulated with the MARS15 code for tungsten, thorium, and natural uranium targets in the proton energy range 0.5 to 120 GeV. This study shows that the proton energy range of 2 to 4 GeV is optimal for both a natU EPD and the tungsten-based testing station that would be the most suitable for proton accelerator facilities. Conservative estimates, not including breeding and fission of plutonium, based on the simulations suggest that the proton beam current of 1 mA will be sufficient to produce 1 GW of thermal output power with the natU EPD while supplying < 8% of that power to operate the accelerator. The thermal analysis shows that the concept considered has a problem due to a possible core meltdown; however, a number of approaches (a beam rastering, in first place) are suggested to mitigate the issue. The efficiency of the considered EPD as a Materials Test Station (MTS) is also evaluated in this study. △ Less

Submitted 16 July, 2014; originally announced July 2014.

Comments: Presented at the 12th Meeting on Shielding Aspects of Accelerators, Targets and Irradiation Facilities (SATIF-12), April 28-30, 2014, Fermi National Accelerator Laboratory, Batavia, Illinois, USA

Report number: Fermilab-Conf-14-177-APC-TD

Feasibility Study for a Next-Generation Mu2e Experiment

Authors: K. Knoepfel, V. Pronskikh, R. Bernstein, D. N. Brown, R. Coleman, C. E. Dukes, R. Ehrlich, M. J. Frank, D. Glenzinski, R. C. Group, D. Hedin, D. Hitlin, M. Lamm, J. Miller, S. Miscetti, N. Mokhov, A. Mukherjee, V. Nagaslaev, Y. Oksuzian, T. Page, R. E. Ray, V. L. Rusu, R. Wagner, S. Werkema

Abstract: We explore the feasibility of a next-generation Mu2e experiment that uses Project-X beams to achieve a sensitivity approximately a factor ten better than the currently planned Mu2e facility. We explore the feasibility of a next-generation Mu2e experiment that uses Project-X beams to achieve a sensitivity approximately a factor ten better than the currently planned Mu2e facility. △ Less

Submitted 29 September, 2013; v1 submitted 3 July, 2013; originally announced July 2013.

Comments: 37 pages, 9 figures; submitted as a White Paper for the APS Division of Particles and Fields Community Summer Study; updated to reflect recent progress

Report number: FERMILAB-CONF-13-254

Project X: Physics Opportunities

Authors: Andreas S. Kronfeld, Robert S. Tschirhart, Usama Al-Binni, Wolfgang Altmannshofer, Charles Ankenbrandt, Kaladi Babu, Sunanda Banerjee, Matthew Bass, Brian Batell, David V. Baxter, Zurab Berezhiani, Marc Bergevin, Robert Bernstein, Sudeb Bhattacharya, Mary Bishai, Thomas Blum, S. Alex Bogacz, Stephen J. Brice, Joachim Brod, Alan Bross, Michael Buchoff, Thomas W. Burgess, Marcela Carena, Luis A. Castellanos, Subhasis Chattopadhyay , et al. (111 additional authors not shown)

Abstract: Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, had… ▽ More Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, hadron structure, hadron spectroscopy, and lattice-QCD calculations. Part 1 is available as arXiv:1306.5022 [physics.acc-ph] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph]. △ Less

Submitted 1 October, 2016; v1 submitted 20 June, 2013; originally announced June 2013.

Comments: 209 pp. with many figures; prepared in part for the DPF Community Summer Study; v2 corrects typos (including one author surname), adds an author, and conforms with the version being printed; v3 includes two more chapter authors in full list at the top

Report number: FERMILAB-TM-2557; ANL/PHY-13/2; BNL-101116-2013-BC/81834; JLAB-ACP-13-1725; LBNL-6334E; PNNL-22523; UASLP-IF-13-001; SLAC-R-1029

Mu2e Conceptual Design Report

Authors: The Mu2e Project, Collaboration, :, R. J. Abrams, D. Alezander, G. Ambrosio, N. Andreev, C. M. Ankenbrandt, D. M. Asner, D. Arnold, A. Artikov, E. Barnes, L. Bartoszek, R. H. Bernstein, K. Biery, V. Biliyar, R. Bonicalzi, R. Bossert, M. Bowden, J. Brandt, D. N. Brown, J. Budagov, M. Buehler, A. Burov, R. Carcagno , et al. (203 additional authors not shown)

Abstract: Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe… ▽ More Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 562 pages, 339 figures

Report number: Fermilab-TM-2545

Calculation of Residual Dose Around Small Objects Using Mu2e Target as an Example

Authors: V. S. Pronskikh, A. F. Leveling, N. V. Mokhov, I. L. Rakhno, P. Aarnio

Abstract: The MARS15 code provides contact residual dose rates for relatively large accelerator and experimental components for predefined irradiation and cooling times. The dose rate at particular distances from the components, some of which can be rather small in size, is calculated in a post Monte-Carlo stage via special algorithms described elsewhere. The approach is further developed and described in t… ▽ More The MARS15 code provides contact residual dose rates for relatively large accelerator and experimental components for predefined irradiation and cooling times. The dose rate at particular distances from the components, some of which can be rather small in size, is calculated in a post Monte-Carlo stage via special algorithms described elsewhere. The approach is further developed and described in this paper. △ Less

Submitted 1 May, 2012; originally announced May 2012.

Comments: 7 pp

Report number: FERMILAB-FN-0930-APC

Radiation and thermal analysis of production solenoid for Mu2e experimental setup

Authors: V. S. Pronskikh, V. V. Kashikhin, N. V. Mokhov

Abstract: The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the p… ▽ More The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the pion decay will be captured in the PS aperture and directed by an S-shaped Transport Solenoid towards the stop** target inside the Detector Solenoid. In order for the superconducting magnets to operate reliably and with a sufficient safety margin, the peak neutron flux entering the coils must be reduced by 3 orders of magnitude that is achieved by means of a sophisticated absorber placed in the magnet aperture. The proposed absorber, consisting of W- and Cu-based alloy parts, is optimized for the performance and cost. Results of MARS15 simulations of energy deposition and radiation are reported. The results of the PS magnet thermal analysis, coordinated with the coil cooling scheme, are reported as well for the selected absorber design. △ Less

Submitted 17 February, 2012; originally announced February 2012.

Comments: 4 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, USA

Report number: FERMILAB-CONF-11-125-APC

Optimization of a Mu2e production solenoid heat and radiation shield using MARS15

Authors: V. S. Pronskikh, N. V. Mokhov

Abstract: A Monte-Carlo study of several Mu2e Production Solenoid (PS) absorber (heat shield) versions using the MARS15 code has been performed. Optimizations for material as well as cost (amount of tungsten) have been carried out. Studied are such quantities as the number of displacements per atom (DPA) in the helium-cooled solenoid superconducting coils, power density and dynamic heat load in various part… ▽ More A Monte-Carlo study of several Mu2e Production Solenoid (PS) absorber (heat shield) versions using the MARS15 code has been performed. Optimizations for material as well as cost (amount of tungsten) have been carried out. Studied are such quantities as the number of displacements per atom (DPA) in the helium-cooled solenoid superconducting coils, power density and dynamic heat load in various parts of the PS and its surrounding structures. Prompt dose, residual dose, secondary particle flux are also simulated in the PS structures and the experimental hall. A preliminary choice of the PS absorber design is made on the ground of these studies. △ Less

Submitted 17 February, 2012; originally announced February 2012.

Comments: 7 pp. 20th International Baldin Seminar on High Energy Physics Problems: Relativistic Nuclear Physics and Quantum Chromodynamics (ISHEPP 2010) 4-9 Oct 2010: Dubna, Russia

Report number: FERMILAB-CONF-11-024-APC

Recoil Studies in the Reaction of 12-C Ions with the Enriched Isotope 118-Sn

Authors: A. R. Balabekyan, A. S. Danagulyan, J. R. Drnoyan, N. A. Demekhina, G. H. Hovhannisyan, J. Adam, V. G. Kalinnikov, M. I. Krivopustov, V. S. Pronskikh, V. I. Stegailov, A. A. Solnyshkin, V. M. Tsoupko-Sitnikov, S. G. Mashnik, K. K. Gudima

Abstract: The recoil properties of the product nuclei from the interaction of 2.2 GeV/nucleon 12-C ions from Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 118-Sn target have been studied using catcher foils. The experimental data were analyzed using the mathematical formalism of the standard two-step vector model. The results for 12-C ions… ▽ More The recoil properties of the product nuclei from the interaction of 2.2 GeV/nucleon 12-C ions from Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 118-Sn target have been studied using catcher foils. The experimental data were analyzed using the mathematical formalism of the standard two-step vector model. The results for 12-C ions are compared with those for deuterons and protons. Three different Los Alamos versions of the Quark-Gluon String Model (LAQGSM) were used for comparison with our experimental data. △ Less

Submitted 4 May, 2009; originally announced May 2009.

Comments: 10 pages, 6 figures, submitted to Nucl. Phys. A

Report number: LANL Report LA-UR-09-02810

Journal ref: Phys.Atom.Nucl.73:1176-1184,2010

Recoil Products from p+$^{118}Sn$ and d+$^{118}Sn$ at 3.65 GeV/A

Authors: A. R. Balabekyan, A. S. Danagulyan, J. R. Drnoyan, N. A. Demekhina, G. H. Hovhannisyan, J. Adam, V. G. Kalinnikov, M. I. Krivopustov, V. S. Pronskikh, V. I. Stegailov, A. A. Solnyshkin, P. Chaloun, V. M. Tsoupko-Sitnikov, S. G. Mashnik, K. K. Gudima

Abstract: The recoil properties of the product nuclei from the interaction of 3.65 GeV/nucleon protons and deuterons with $^{118}Sn$ target have been studied by the method of catching foils on the beams of LHE JINR. The mathematical formalism of the standard two step vector model was used for the analysis of experimental results. The obtained results for the protons are compared with the ones obtained f… ▽ More The recoil properties of the product nuclei from the interaction of 3.65 GeV/nucleon protons and deuterons with $^{118}Sn$ target have been studied by the method of catching foils on the beams of LHE JINR. The mathematical formalism of the standard two step vector model was used for the analysis of experimental results. The obtained results for the protons are compared with the ones obtained for the deuterons. The total energy of the deuterons beam was 3.65GeV/nucleon. It is interesting to note that the forward velocity v and the recoil nuclei kinetic energy increases linearly with the increase of mass loss of target $ΔA$, but seems to change its slope at around $ΔA=60$. It seems that light and medium mass products are produced partly by a fragmentation mechanism. △ Less

Submitted 17 May, 2006; v1 submitted 23 March, 2006; originally announced March 2006.

Comments: 7pages, 3 figures, 2 tables. to be submit to "Nuclear Physics A"

Report number: LA-UR-06-3530

Formation of Light Isotopes by Protons and Deuterons of 3.65 GeV/nucleon on Separated Tin Isotopes

Authors: A. R. Balabekyan, A. S. Danagulyan, J. R. Drnoyan, G. H. Hovhannisyan, J. Adam, V. G. Kalinnikov, M. I. Krivopustov, V. S. Pronskikh, V. I. Stegailov, A. A. Solnyshkin, P. Chaloun, V. M. Tsoupko-Sitnikov, S. G. Mashnik, K. K. Gudima

Abstract: We measure cross sections for residual nuclide formation in the mass range 6 < A < 97 caused by bombardment with protons and deuterons of 3.65 GeV/nucleon energy of enriched tin isotopes (112-Sn, 118-Sn, 120-Sn, 124-Sn). The experimental data are compared with calculations by the codes FLUKA, LAHET, CEM03, and LAQGSM03. Scaling behavior is observed for the whole mass region of residual nuclei, s… ▽ More We measure cross sections for residual nuclide formation in the mass range 6 < A < 97 caused by bombardment with protons and deuterons of 3.65 GeV/nucleon energy of enriched tin isotopes (112-Sn, 118-Sn, 120-Sn, 124-Sn). The experimental data are compared with calculations by the codes FLUKA, LAHET, CEM03, and LAQGSM03. Scaling behavior is observed for the whole mass region of residual nuclei, showing a possible multifragmentation mechanism for the formation of light products (6 < A < 31). Our analysis of the isoscaling dependence also shows a possible contribution of multifragmentation to the production of heavier nuclides, in the mass region 39 < A < 81. △ Less

Submitted 22 June, 2005; originally announced June 2005.

Comments: 16 pages, LaTeX, 6 figures, 6 tables, submitted to Yadernaya Fizika (Physics of Atimoc Nuclei)

Report number: LA-UR-05-4676

Journal ref: Phys.Atom.Nucl. 69 (2006) 1485-1495

Investigation of proton-nuclear reactions on isotopes $^{129}$I, $^{237}$Np and $^{241}$Am at $E_p$ = 660 MeV

Authors: V. S. Pronskikh

Abstract: Cross sections of the residual nuclei production in $^{129}$I, $^{237}$Np and $^{241}$Am target irradiated by proton beam with energy 660 MeV are measured by means of activation analysis with the use of HPGe detectors. The number of product nuclei identified amounts to 74 for $^{129}$I target, 53 for $^{237}$Np target and 80 for $^{241}$Am target. Theoretical model analysis employing eleven cont… ▽ More Cross sections of the residual nuclei production in $^{129}$I, $^{237}$Np and $^{241}$Am target irradiated by proton beam with energy 660 MeV are measured by means of activation analysis with the use of HPGe detectors. The number of product nuclei identified amounts to 74 for $^{129}$I target, 53 for $^{237}$Np target and 80 for $^{241}$Am target. Theoretical model analysis employing eleven contemporary computer models of hadron-nuclear interactions is performed. Insufficient for practical purposes precision of modelling of the reactions under study is demonstrated. Methods for short-lived beta-unstable reaction product identification are developed and amended, a program package for gamma-spectrometry data analysis is described. △ Less

Submitted 26 March, 2005; originally announced March 2005.

Comments: Summary report of the Thesis submitted for the fulfillment of the requirements of the Ph.D. degree in Physics and Mathematics with speciality "Physics of Atomic Nuclei and Elementary Particles" to The Dissertation Council D720.001.02 of Joint Institute for Nuclear Research, Dubna, Russia

Report number: D1-2005-34

Analysis of the JINR p(660 MeV) + 129I, 237Np, and 241Am Measurements with Eleven Different Models

Authors: S. G. Mashnik, V. S. Pronskikh, J. Adam, A. Balabekyan, V. S. Barashenkov, V. P. Filinova, A. A. Solnyshkin, V. M. Tsoupko-Sitnikov, R. Brandt, R. Odoj, A. J. Sierk, R. E. Prael, K. K. Gudima, M. I. Baznat

Abstract: We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2… ▽ More We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. We found out that all these models have problems in a correct description of many of these cross sections, though some of these models describe very well most of the recent measurements done at GSI using inverse kinematics, as well as many other reactions. None of the tested here models is able to reproduce well all the JINR data and all of them should be further improved. Development of a better universal evaporation/fission model should be of a highest priority. We conclude that it is impossible to make a correct choice between fission and fragmentation reaction mechanisms analyzing only measurements on product cross sections; addressing this question would require analysis of two- or multi-particle correlation measurements. △ Less

Submitted 27 July, 2004; originally announced July 2004.

Comments: 12 pages, LaTeX, 5 figures, 3 tables, presented at the 7th Specialists' Meeting on Shielding Aspect of Accelerators, Targets and Irradiated Facilities, SATIF-7, Sacavem (Lisbon), Portugal, May 17-18, 2004

Report number: LA-UR-04-4929

Study of Proton Induced Reactions in a Radioactive 129-I Target at Ep=660 MeV

Authors: V. S. Pronskikh, J. Adam, A. R. Balabekyan, V. S. Barashenkov, V. P. Dzhelepov, S. A. Gustov, V. P. Filinova, V. G. Kalinnikov, M. I. Krivopustov, I. V. Mirokhin, A. A. Solnyshkin, V. I. Stegailov, V. M. Tsoupko-Sitnikov, J. Mrazek, R. Brandt, W. Westmeier, R. Odoj, S. G. Mashnik, A. J. Sierk, R. E. Prael, K. K. Gudima, M. I. Baznat

Abstract: Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA optio… ▽ More Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA options), CASCADE, CEM95, CEM2K, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. Most of the models describe spallation products with masses close to the target reasonably well while the reliability of the codes differs greatly in the deep spallation and fission/fragmentation regions. The difficulties in describing products with A=40-80 by all of the codes tested here except for CEM2k+GEMINI and LAQGSM+GEMINI is related to the neglect of fission (and fragmentation) processes for targets as light as 129-I. △ Less

Submitted 30 March, 2004; originally announced March 2004.

Comments: 6 pages, LaTeX, 1 figure, 3 tables, presented at the International Workshop on Nuclear Data for the Transmutation of Nuclear Waste (TRAMU@GSI), GSI-Darmstadt, Germany, September 1-5, 2003

Report number: LA-UR-04-2139