-
PLATO's signal and noise budget
Authors:
Anko Börner,
Carsten Paproth,
Juan Cabrera,
Martin Pertenais,
Heike Rauer,
J. Miguel Mas-Hesse,
Isabella Pagano,
Jose Lorenzo Alvarez,
Anders Erikson,
Denis Grießbach,
Yves Levillain,
Demetrio Magrin,
Valery Mogulsky,
Sami-Matias Niemi,
Thibaut Prod'homme,
Sara Regibo,
Joris De Ridder,
Steve Rockstein,
Reza Samadi,
Dimitri Serrano-Velarde,
Alan Smith,
Peter Verhoeve,
Dave Walton
Abstract:
ESA's PLATO mission aims the detection and characterization of terrestrial planets around solar-type stars as well as the study of host star properties. The noise-to-signal ratio (NSR) is the main performance parameter of the PLATO instrument, which consists of 24 Normal Cameras and 2 Fast Cameras. In order to justify, verify and breakdown NSR-relevant requirements the software simulator PINE was…
▽ More
ESA's PLATO mission aims the detection and characterization of terrestrial planets around solar-type stars as well as the study of host star properties. The noise-to-signal ratio (NSR) is the main performance parameter of the PLATO instrument, which consists of 24 Normal Cameras and 2 Fast Cameras. In order to justify, verify and breakdown NSR-relevant requirements the software simulator PINE was developed. PINE models the signal pathway from a target star to the digital output of a camera based on physical models and considers the major noise contributors. In this paper, the simulator's coarse mode is introduced which allows fast performance analyses on instrument level. The added value of PINE is illustrated by exemplary applications.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
The ESO's Extremely Large Telescope Working Groups
Authors:
Paolo Padovani,
Michele Cirasuolo,
Remco van der Burg,
Faustine Cantalloube,
Elizabeth George,
Markus Kasper,
Kieran Leschinski,
Carlos Martins,
Julien Milli,
Sabine Möhler,
Mark Neeser,
Benoit Neichel,
Angel Otarola,
Rubén Sánchez-Janssen,
Benoit Serra,
Alain Smette,
Elena Valenti,
Christophe Verinaud,
Joël Vernet,
Olivier Absil,
Guido Agapito,
Morten Andersen,
Carmelo Arcidiacono,
Matej Arko,
Pierre Baudoz
, et al. (60 additional authors not shown)
Abstract:
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations an…
▽ More
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
The Infra-Red Telescope (IRT) on board the THESEUS mission
Authors:
Diego Götz,
Stéphane Basa,
Frédéric Pinsard,
Laurent Martin,
Axel Arhancet,
Enrico Bozzo,
Christophe Cara,
Isabel Escudero Sanz,
Pierre-Antoine Frugier,
Johan Floriot,
Ludovic Genolet,
Paul Heddermann,
Emeric Le Floc'h,
Isabelle Le Mer,
Stéphane Paltani,
Tony Pamplona,
Céline Paries,
Thibaut Prod'homme,
Benjamin Schneider,
Chris Tenzer,
Thierry Tourrette,
Henri Triou
Abstract:
The Infra-Red Telescope (IRT) is part of the payload of the THESEUS mission, which is one of the two ESA M5 candidates within the Cosmic Vision program, planned for launch in 2032. The THESEUS payload, composed by two high energy wide field monitors (SXI and XGIS) and a near infra-red telescope (IRT), is optimized to detect, localize and characterize Gamma-Ray Bursts and other high-energy transien…
▽ More
The Infra-Red Telescope (IRT) is part of the payload of the THESEUS mission, which is one of the two ESA M5 candidates within the Cosmic Vision program, planned for launch in 2032. The THESEUS payload, composed by two high energy wide field monitors (SXI and XGIS) and a near infra-red telescope (IRT), is optimized to detect, localize and characterize Gamma-Ray Bursts and other high-energy transients. The main goal of the IRT is to identify and precisely localize the NIR counterparts of the high-energy sources and to measure their distance. Here we present the design of the IRT and its expected performance.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
A smartphone-based arbitrary scene projector for detector testing and instrument performance evaluation
Authors:
Thibaut Prod'homme,
Patricia Liebing,
Peter Verhoeve,
Ilya Menyaylov,
Frédéric Lemmel,
Hans Smit,
Sander Blommaert,
Dennis Breeveld,
Brian Shortt
Abstract:
Using the high-resolution OLED screen of a smartphone to project arbitrary scenes and patterns can open a complete new dimension for testing sensors in the visible. Based on an original concept from JPL (Jet Propulsion Laboratory), this contribution describes a new experimental setup designed to achieve the demanding performance of its first application by ESA (European Space Agency): the evaluati…
▽ More
Using the high-resolution OLED screen of a smartphone to project arbitrary scenes and patterns can open a complete new dimension for testing sensors in the visible. Based on an original concept from JPL (Jet Propulsion Laboratory), this contribution describes a new experimental setup designed to achieve the demanding performance of its first application by ESA (European Space Agency): the evaluation of radiation-induced CTI (Charge Transfer Inefficiency) on Euclid's weak lensing measurement. We show that pushed to its limits especially in terms of calibration such a simple experiment can deliver a level of optical performance high enough to be applied in the verification of high-precision astronomy instrument performance.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Pyxel: the collaborative detection simulation framework
Authors:
Thibaut Prod'homme,
Frédéric Lemmel,
Matej Arko,
Benoît Serra,
Elizabeth M. George,
Enrico Biancalani,
Hans Smit,
David Lucsanyi
Abstract:
Pyxel is a novel python tool for end-to-end detection chain simulation i.e. from detector optical effects to readout electronics effects. It is an easy-to-use framework to host and pipeline any detector effect model. It is suited for simulating both Charge-Coupled Devices, CMOS Image Sensors and Mercury Cadmium Telluride hybridized arrays. It is conceived as a collaborative tool to promote reusabi…
▽ More
Pyxel is a novel python tool for end-to-end detection chain simulation i.e. from detector optical effects to readout electronics effects. It is an easy-to-use framework to host and pipeline any detector effect model. It is suited for simulating both Charge-Coupled Devices, CMOS Image Sensors and Mercury Cadmium Telluride hybridized arrays. It is conceived as a collaborative tool to promote reusability, knowledge transfer, and reliability in the instrumentation community. We provide a demonstration of Pyxel's basic principles, describe newly added capabilities, and give examples of more advanced applications.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Comparing simulations and test data of a radiation damaged charge-couple device for the Euclid mission
Authors:
Jesper Skottfelt,
David Hall,
Jason Gow,
Neil Murray,
Andrew Holland,
Thibaut Prod'homme
Abstract:
The VIS instrument on board the Euclid mission is a weak-lensing experiment that depends on very precise shape measurements of distant galaxies obtained by a large CCD array. Due to the harsh radiative environment outside the Earth's atmosphere, it is anticipated that the CCDs over the mission lifetime will be degraded to an extent that these measurements will only be possible through the correcti…
▽ More
The VIS instrument on board the Euclid mission is a weak-lensing experiment that depends on very precise shape measurements of distant galaxies obtained by a large CCD array. Due to the harsh radiative environment outside the Earth's atmosphere, it is anticipated that the CCDs over the mission lifetime will be degraded to an extent that these measurements will only be possible through the correction of radiation damage effects. We have therefore created a Monte Carlo model that simulates the physical processes taking place when transferring signal through a radiation-damaged CCD. The software is based on Shockley-Read-Hall theory, and is made to mimic the physical properties in the CCD as closely as possible. The code runs on a single electrode level and takes three dimensional trap position, potential structure of the pixel, and multi-level clocking into account. A key element of the model is that it also takes device specific simulations of electron density as a direct input, thereby avoiding to make any analytical assumptions about the size and density of the charge cloud. This paper illustrates how test data and simulated data can be compared in order to further our understanding of the positions and properties of the individual radiation-induced traps.
△ Less
Submitted 30 October, 2017;
originally announced October 2017.
-
Gaia Data Release 1. Testing the parallaxes with local Cepheids and RR Lyrae stars
Authors:
Gaia Collaboration,
G. Clementini,
L. Eyer,
V. Ripepi,
M. Marconi,
T. Muraveva,
A. Garofalo,
L. M. Sarro,
M. Palmer,
X. Luri,
R. Molinaro,
L. Rimoldini,
L. Szabados,
I. Musella,
R. I. Anderson,
T. Prusti,
J. H. J. de Bruijne,
A. G. A. Brown,
A. Vallenari,
C. Babusiaux,
C. A. L. Bailer-Jones,
U. Bastian,
M. Biermann,
D. W. Evans,
F. Jansen
, et al. (566 additional authors not shown)
Abstract:
Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by…
▽ More
Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.
△ Less
Submitted 1 May, 2017;
originally announced May 2017.
-
Gaia Data Release 1. Open cluster astrometry: performance, limitations, and future prospects
Authors:
Gaia Collaboration,
F. van Leeuwen,
A. Vallenari,
C. Jordi,
L. Lindegren,
U. Bastian,
T. Prusti,
J. H. J. de Bruijne,
A. G. A. Brown,
C. Babusiaux,
C. A. L. Bailer-Jones,
M. Biermann,
D. W. Evans,
L. Eyer,
F. Jansen,
S. A. Klioner,
U. Lammers,
X. Luri,
F. Mignard,
C. Panem,
D. Pourbaix,
S. Randich,
P. Sartoretti,
H. I. Siddiqui,
C. Soubiran
, et al. (567 additional authors not shown)
Abstract:
Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the ast…
▽ More
Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.
△ Less
Submitted 3 March, 2017;
originally announced March 2017.
-
On-orbit performance of the Gaia CCDs at L2
Authors:
C. Crowley,
R. Kohley,
N. C. Hambly,
M. Davidson,
A. Abreu,
F. van Leeuwen,
C. Fabricius,
G. Seabroke,
J. H. J. de Bruijne,
A. Short,
L. Lindegren,
A. G. A. Brown,
G. Sarri,
P. Gare,
T. Prusti,
T. Prod'homme,
A. Mora,
J. Martin-Fleitas,
F. Raison,
U. Lammers,
W. O'Mullane,
F. Jansen
Abstract:
The European Space Agency's Gaia satellite was launched into orbit around L2 in December 2013 with a payload containing 106 large-format scientific CCDs. The primary goal of the mission is to repeatedly obtain high-precision astrometric and photometric measurements of one thousand million stars over the course of five years. The scientific value of the down-linked data, and the operation of the on…
▽ More
The European Space Agency's Gaia satellite was launched into orbit around L2 in December 2013 with a payload containing 106 large-format scientific CCDs. The primary goal of the mission is to repeatedly obtain high-precision astrometric and photometric measurements of one thousand million stars over the course of five years. The scientific value of the down-linked data, and the operation of the onboard autonomous detection chain, relies on the high performance of the detectors. As Gaia slowly rotates and scans the sky, the CCDs are continuously operated in a mode where the line clock rate and the satellite rotation spin-rate are in synchronisation. Nominal mission operations began in July 2014 and the first data release is being prepared for release at the end of Summer 2016.
In this paper we present an overview of the focal plane, the detector system, and strategies for on-orbit performance monitoring of the system. This is followed by a presentation of the performance results based on analysis of data acquired during a two-year window beginning at payload switch-on. Results for parameters such as readout noise and electronic offset behaviour are presented and we pay particular attention to the effects of the L2 radiation environment on the devices. The radiation-induced degradation in the charge transfer efficiency (CTE) in the (parallel) scan direction is clearly diagnosed; however, an extrapolation shows that charge transfer inefficiency (CTI) effects at end of mission will be approximately an order of magnitude less than predicted pre-flight. It is shown that the CTI in the serial register (horizontal direction) is still dominated by the traps inherent to the manufacturing process and that the radiation-induced degradation so far is only a few per cent. Finally, we summarise some of the detector effects discovered on-orbit which are still being investigated.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
Radiation effects on the Gaia CCDs after 30 months at L2
Authors:
Cian Crowley,
Asier Abreu,
Ralf Kohley,
Thibaut Prod'homme,
Thierry Beaufort
Abstract:
Since the launch of ESA's Gaia satellite in December 2013, the 106 large-format scientific CCDs onboard have been operating at L2. Due to a combination of the high-precision measurement requirements of the mission and the predicted proton environment at L2, the effect of non-ionizing radiation damage on the detectors was early identified pre-launch as potentially imposing a major limitation on the…
▽ More
Since the launch of ESA's Gaia satellite in December 2013, the 106 large-format scientific CCDs onboard have been operating at L2. Due to a combination of the high-precision measurement requirements of the mission and the predicted proton environment at L2, the effect of non-ionizing radiation damage on the detectors was early identified pre-launch as potentially imposing a major limitation on the scientific value of the data. In this paper we compare pre-flight radiation-induced Charge Transfer Inefficiency (CTI) predictions against in-flight measurements, focusing especially on charge injection diagnostics, as well as correlating these CTI diagnostic results with solar proton event data. We show that L2-directed solar activity has been relatively low since launch, and radiation damage (so far) is less than originally expected. Despite this, there are clear cases of correlation between earth-directed solar coronal mass ejection events and abrupt changes in CTI diagnostics over time. These sudden jumps are lying on top of a rather constant increase in CTI which we show is primarily due to the continuous bombardment of the devices by high-energy Galactic Cosmic Rays. We examine the possible reasons for the lower than expected levels of CTI as well as examining the effect of controlled payload heating events on the CTI diagnostics. Radiation-induced CTI in the CCD serial registers and effects of ionizing radiation are also correspondingly lower than expected, however these topics are not examined here in detail.
△ Less
Submitted 4 August, 2016;
originally announced August 2016.
-
How well can Charge Transfer Inefficiency be corrected? A parameter sensitivity study for iterative correction
Authors:
Holger Israel,
Richard Massey,
Thibaut Prod'homme,
Mark Cropper,
Oliver Cordes,
Jason Gow,
Ralf Kohley,
Ole Marggraf,
Sami Niemi,
Jason Rhodes,
Alex Short,
Peter Verhoeve
Abstract:
Radiation damage to space-based Charge-Coupled Device (CCD) detectors creates defects which result in an increasing Charge Transfer Inefficiency (CTI) that causes spurious image trailing. Most of the trailing can be corrected during post-processing, by modelling the charge trap** and moving electrons back to where they belong. However, such correction is not perfect -- and damage is continuing t…
▽ More
Radiation damage to space-based Charge-Coupled Device (CCD) detectors creates defects which result in an increasing Charge Transfer Inefficiency (CTI) that causes spurious image trailing. Most of the trailing can be corrected during post-processing, by modelling the charge trap** and moving electrons back to where they belong. However, such correction is not perfect -- and damage is continuing to accumulate in orbit. To aid future development, we quantify the limitations of current approaches, and determine where imperfect knowledge of model parameters most degrade measurements of photometry and morphology. As a concrete application, we simulate $1.5\times10^{9}$ "worst case" galaxy and $1.5\times10^{8}$ star images to test the performance of the Euclid visual instrument detectors. There are two separable challenges: If the model used to correct CTI is perfectly the same as that used to add CTI, $99.68$ % of spurious ellipticity is corrected in our setup. This is because readout noise is not subject to CTI, but gets over-corrected during correction. Second, if we assume the first issue to be solved, knowledge of the charge trap density within $Δρ/ρ\!=\!(0.0272\pm0.0005)$ %, and the characteristic release time of the dominant species to be known within $Δτ/τ\!=\!(0.0400\pm0.0004)$ % will be required. This work presents the next level of definition of in-orbit CTI calibration procedures for Euclid.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Detecting stars, galaxies, and asteroids with Gaia
Authors:
J. H. J. de Bruijne,
M. Allen,
S. Azaz,
A. Krone-Martins,
T. Prod'homme,
D. Hestroffer
Abstract:
(Abridged) Gaia aims to make a 3-dimensional map of 1,000 million stars in our Milky Way to unravel its kinematical, dynamical, and chemical structure and evolution. Gaia's on-board detection software discriminates stars from spurious objects like cosmic rays and Solar protons. For this, parametrised point-spread-function-shape criteria are used. This study aims to provide an optimum set of parame…
▽ More
(Abridged) Gaia aims to make a 3-dimensional map of 1,000 million stars in our Milky Way to unravel its kinematical, dynamical, and chemical structure and evolution. Gaia's on-board detection software discriminates stars from spurious objects like cosmic rays and Solar protons. For this, parametrised point-spread-function-shape criteria are used. This study aims to provide an optimum set of parameters for these filters. We developed an emulation of the on-board detection software, which has 20 free, so-called rejection parameters which govern the boundaries between stars on the one hand and sharp or extended events on the other hand. We evaluate the detection and rejection performance of the algorithm using catalogues of simulated single stars, double stars, cosmic rays, Solar protons, unresolved galaxies, and asteroids. We optimised the rejection parameters, improving - with respect to the functional baseline - the detection performance of single and double stars, while, at the same time, improving the rejection performance of cosmic rays and of Solar protons. We find that the minimum separation to resolve a close, equal-brightness double star is 0.23 arcsec in the along-scan and 0.70 arcsec in the across-scan direction, independent of the brightness of the primary. We find that, whereas the optimised rejection parameters have no significant impact on the detectability of de Vaucouleurs profiles, they do significantly improve the detection of exponential-disk profiles. We also find that the optimised rejection parameters provide detection gains for asteroids fainter than 20 mag and for fast-moving near-Earth objects fainter than 18 mag, albeit this gain comes at the expense of a modest detection-probability loss for bright, fast-moving near-Earth objects. The major side effect of the optimised parameters is that spurious ghosts in the wings of bright stars essentially pass unfiltered.
△ Less
Submitted 2 February, 2015;
originally announced February 2015.
-
An improved model of Charge Transfer Inefficiency and correction algorithm for the Hubble Space Telescope
Authors:
Richard Massey,
Tim Schrabback,
Oliver Cordes,
Ole Marggraf,
Holger Israel,
Lance Miller,
David Hall,
Mark Cropper,
Thibaut Prod'homme,
Sami-Matias Niemi
Abstract:
Charge-Coupled Device (CCD) detectors, widely used to obtain digital imaging, can be damaged by high energy radiation. Degraded images appear blurred, because of an effect known as Charge Transfer Inefficiency (CTI), which trails bright objects as the image is read out. It is often possible to correct most of the trailing during post-processing, by moving flux back to where it belongs. We compare…
▽ More
Charge-Coupled Device (CCD) detectors, widely used to obtain digital imaging, can be damaged by high energy radiation. Degraded images appear blurred, because of an effect known as Charge Transfer Inefficiency (CTI), which trails bright objects as the image is read out. It is often possible to correct most of the trailing during post-processing, by moving flux back to where it belongs. We compare several popular algorithms for this: quantifying the effect of their physical assumptions and tradeoffs between speed and accuracy. We combine their best elements to construct a more accurate model of damaged CCDs in the Hubble Space Telescope's Advanced Camera for Surveys/Wide Field Channel, and update it using data up to early 2013. Our algorithm now corrects 98% of CTI trailing in science exposures, a substantial improvement over previous work. Further progress will be fundamentally limited by the presence of read noise. Read noise is added after charge transfer so does not get trailed - but it is incorrectly untrailed during post-processing.
△ Less
Submitted 6 January, 2014;
originally announced January 2014.
-
Digging supplementary buried channels: investigating the notch architecture within the CCD pixels on ESA's Gaia satellite
Authors:
G. M. Seabroke,
T. Prod'homme,
N. J. Murray,
C. Crowley,
G. Hopkinson,
A. G. A. Brown,
R. Kohley,
A. Holland
Abstract:
The European Space Agency (ESA) Gaia satellite has 106 CCD image sensors which will suffer from increased charge transfer inefficiency (CTI) as a result of radiation damage. To aid the mitigation at low signal levels, the CCD design includes Supplementary Buried Channels (SBCs, otherwise known as `notches') within each CCD column. We present the largest published sample of Gaia CCD SBC Full Well C…
▽ More
The European Space Agency (ESA) Gaia satellite has 106 CCD image sensors which will suffer from increased charge transfer inefficiency (CTI) as a result of radiation damage. To aid the mitigation at low signal levels, the CCD design includes Supplementary Buried Channels (SBCs, otherwise known as `notches') within each CCD column. We present the largest published sample of Gaia CCD SBC Full Well Capacity (FWC) laboratory measurements and simulations based on 13 devices. We find that Gaia CCDs manufactured post-2004 have SBCs with FWCs in the upper half of each CCD that are systematically smaller by two orders of magnitude (<50 electrons) compared to those manufactured pre-2004 (thousands of electrons). Gaia's faint star (13 < G < 20 mag) astrometric performance predictions by Prod'homme et al. and Holl et al. use pre-2004 SBC FWCs as inputs to their simulations. However, all the CCDs already integrated onto the satellite for the 2013 launch are post-2004. SBC FWC measurements are not available for one of our five post-2004 CCDs but the fact it meets Gaia's image location requirements suggests it has SBC FWCs similar to pre-2004. It is too late to measure the SBC FWCs onboard the satellite and it is not possible to theoretically predict them. Gaia's faint star astrometric performance predictions depend on knowledge of the onboard SBC FWCs but as these are currently unavailable, it is not known how representative of the whole focal plane the current predictions are. Therefore, we suggest Gaia's initial in-orbit calibrations should include measurement of the onboard SBC FWCs. We present a potential method to do this. Faint star astrometric performance predictions based on onboard SBC FWCs at the start of the mission would allow satellite operating conditions or CTI software mitigation to be further optimised to improve the scientific return of Gaia.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
An Analytical Model of Radiation-Induced Charge Transfer Inefficiency for CCD Detectors
Authors:
Alexander Short,
Cian Crowley,
Jos H. J. de Bruijne,
Thibaut Prod'homme
Abstract:
The European Space Agency's Gaia mission is scheduled for launch in 2013. It will operate at L2 for 5 years, rotating slowly to scan the sky so that its two optical telescopes will repeatedly observe more than one billion stars. The resulting data set will be iteratively reduced to solve for the position, parallax and proper motion of every observed star. The focal plane contains 106 large area si…
▽ More
The European Space Agency's Gaia mission is scheduled for launch in 2013. It will operate at L2 for 5 years, rotating slowly to scan the sky so that its two optical telescopes will repeatedly observe more than one billion stars. The resulting data set will be iteratively reduced to solve for the position, parallax and proper motion of every observed star. The focal plane contains 106 large area silicon CCDs continuously operating in a mode where the line transfer rate and the satellite rotation are in synchronisation.
One of the greatest challenges facing the mission is radiation damage to the CCDs which will cause charge deferral and image shape distortion. This is particularly important because of the extreme accuracy requirements of the mission. Despite steps taken at hardware level to minimise the effects of radiation, the residual distortion will need to be calibrated during the pipeline data processing. Due to the volume and inhomogeneity of data involved, this requires a model which describes the effects of the radiation damage which is physically realistic, yet fast enough to implement in the pipeline. The resulting charge distortion model was developed specifically for the Gaia CCD operating mode. However, a generalised version is presented in this paper and this has already been applied in a broader context, for example to investigate the impact of radiation damage on the Euclid dark-energy mission data.
△ Less
Submitted 6 February, 2013;
originally announced February 2013.
-
The impact of CCD radiation damage on Gaia astrometry: I. Image location estimation in the presence of radiation damage
Authors:
Thibaut Prod'homme,
Berry Holl,
Lennart Lindegren,
Anthony G. A. Brown
Abstract:
The Gaia mission has been designed to perform absolute astrometric measurements with unprecedented accuracy; the end-of-mission parallax standard error is required to be 30 micro-arcseconds for a G2V type star of magnitude 15. These requirements set a stringent constraint on the accuracy of the estimation of the location of the stellar image on the CCD for each observation: e.g., 0.3 milli-arsecon…
▽ More
The Gaia mission has been designed to perform absolute astrometric measurements with unprecedented accuracy; the end-of-mission parallax standard error is required to be 30 micro-arcseconds for a G2V type star of magnitude 15. These requirements set a stringent constraint on the accuracy of the estimation of the location of the stellar image on the CCD for each observation: e.g., 0.3 milli-arseconds (mas) or 0.005 pixels for the same V=15 G2V star. However the Gaia CCDs will suffer from charge transfer inefficiency (CTI) caused by radiation damage that will degrade the stellar image quality and may degrade the astrometric performance of Gaia if not properly addressed. For the first time at this level of detail, the potential impact of radiation damage on the performance of Gaia is investigated. In this first paper we focus on the evaluation of the CTI impact on the image location accuracy. We show that CTI decreases the stellar image signal-to-noise ratio and irreversibly degrades the image location estimation precision. As a consequence the location estimation standard errors increase by up to 6% for a radiation damage level equivalent to the end-of-mission. In addition the CTI-induced image distortion introduces a systematic bias in the image location estimation (up to 0.05 pixels or 3 mas in the Gaia operating conditions). We present a novel approach to CTI mitigation that enables, without correction of the raw data, the unbiased estimation of the image location and flux from damaged observations. Its implementation reduces the maximum measured location bias for the faintest magnitude to 0.005 pixels (~4e-4 pixels at magnitude 15). In a second paper we will investigate how the CTI effects affect the final astrometric accuracy of Gaia by propagating residual errors through the astrometric solution.
△ Less
Submitted 7 October, 2011;
originally announced October 2011.
-
Electrode level Monte Carlo model of radiation damage effects on astronomical CCDs
Authors:
T. Prod'homme,
A. G. A. Brown,
L. Lindegren,
A. D. T. Short,
S. W. Brown
Abstract:
Current optical space telescopes rely upon silicon Charge Coupled Devices (CCDs) to detect and image the incoming photons. The performance of a CCD detector depends on its ability to transfer electrons through the silicon efficiently, so that the signal from every pixel may be read out through a single amplifier. This process of electron transfer is highly susceptible to the effects of solar proto…
▽ More
Current optical space telescopes rely upon silicon Charge Coupled Devices (CCDs) to detect and image the incoming photons. The performance of a CCD detector depends on its ability to transfer electrons through the silicon efficiently, so that the signal from every pixel may be read out through a single amplifier. This process of electron transfer is highly susceptible to the effects of solar proton damage (or non-ionizing radiation damage). This is because charged particles passing through the CCD displace silicon atoms, introducing energy levels into the semi-conductor bandgap which act as localized electron traps. The reduction in Charge Transfer Efficiency (CTE) leads to signal loss and image smearing. The European Space Agency's astrometric Gaia mission will make extensive use of CCDs to create the most complete and accurate stereoscopic map to date of the Milky Way. In the context of the Gaia mission CTE is referred to with the complementary quantity Charge Transfer Inefficiency (CTI = 1-CTE). CTI is an extremely important issue that threatens Gaia's performances. We present here a detailed Monte Carlo model which has been developed to simulate the operation of a damaged CCD at the pixel electrode level. This model implements a new approach to both the charge density distribution within a pixel and the charge capture and release probabilities, which allows the reproduction of CTI effects on a variety of measurements for a large signal level range in particular for signals of the order of a few electrons. A running version of the model as well as a brief documentation and a few examples are readily available at http://www.strw.leidenuniv.nl/~prodhomme/cemga.php as part of the CEMGA java package (CTI Effects Models for Gaia).
△ Less
Submitted 18 March, 2011;
originally announced March 2011.
-
Modelling Gaia CCD pixels with Silvaco 3D engineering software
Authors:
G. M. Seabroke,
T. Prod'homme,
G. Hopkinson,
D. Burt,
M. Robbins,
A. Holland
Abstract:
Gaia will only achieve its unprecedented measurement accuracy requirements with detailed calibration and correction for radiation damage. We present our Silvaco 3D engineering software model of the Gaia CCD pixel and two of its applications for Gaia: (1) physically interpreting supplementary buried channel (SBC) capacity measurements (pocket-pum** and first pixel response) in terms of e2v manufa…
▽ More
Gaia will only achieve its unprecedented measurement accuracy requirements with detailed calibration and correction for radiation damage. We present our Silvaco 3D engineering software model of the Gaia CCD pixel and two of its applications for Gaia: (1) physically interpreting supplementary buried channel (SBC) capacity measurements (pocket-pum** and first pixel response) in terms of e2v manufacturing do** alignment tolerances; and (2) deriving electron densities within a charge packet as a function of the number of constituent electrons and 3D position within the charge packet as input to microscopic models being developed to simulate radiation damage.
△ Less
Submitted 13 September, 2010;
originally announced September 2010.