-
The solar gravitational redshift from HARPS-LFC Moon spectra. A test of the General Theory of Relativity
Authors:
J. I. González Hernández,
R. Rebolo,
L. Pasquini,
G. Lo Curto,
P. Molaro,
E. Caffau,
H. -G. Ludwig,
M. Steffen,
M. Esposito,
A. Suárez Mascareño,
B. Toledo-Padrón,
R. A. Probst,
T. W. Hänsch,
R. Holzwarth,
A. Manescau,
T. Steinmetz,
Th. Udem,
T. Wilken
Abstract:
The General Theory of Relativity predicts the redshift of spectral lines in the solar photosphere, as a consequence of the gravitational potential of the Sun. This effect can be measured from a solar disk-integrated flux spectrum of the Sun's reflected light on solar system bodies. The laser frequency comb (LFC) calibration system attached to the HARPS spectrograph offers the possibility to perfor…
▽ More
The General Theory of Relativity predicts the redshift of spectral lines in the solar photosphere, as a consequence of the gravitational potential of the Sun. This effect can be measured from a solar disk-integrated flux spectrum of the Sun's reflected light on solar system bodies. The laser frequency comb (LFC) calibration system attached to the HARPS spectrograph offers the possibility to perform an accurate measurement of the solar gravitational redshift (GRS) by observing the Moon or other solar system bodies. We have analysed the line shift observed in Fe absorption lines from five high-quality HARPS-LFC spectra of the Moon. We select an initial sample of 326 photospheric Fe lines in the spectral range 476-585 nm and measure their line positions and equivalent widths (EWs). Accurate line shifts are derived from the wavelength position of the core of the lines compared with the laboratory wavelengths. We fit the observed spectral Fe lines using CO$^5$BOLD 3D synthetic profiles. Convective motions in the solar photosphere do not affect the line cores of Fe lines stronger than about $\sim 150$ mA. In our sample, only 15 FeI lines have EWs in the range $150 <$ EW(mA) $< 550$, providing a measurement of the solar GRS at $639\pm14$ ${\rm m\;s^{-1}}$, consistent with the expected theoretical value on Earth of $\sim 633.1$ ${\rm m\;s^{-1}}$. A final sample of about 97 weak Fe lines with EW $<180$ mA allows us to derive a mean global line shift of $638\pm6$ ${\rm m\;s^{-1}}$ in agreement with the theoretical solar GRS. These are the most accurate measurements of the solar GRS so far. Ultrastable spectrographs calibrated with the LFC over a larger spectral range, such as HARPS or ESPRESSO, together with a further improvement on the laboratory wavelengths, could provide a more robust measurement of the solar GRS and further tests for the 3D hydrodynamical models.
△ Less
Submitted 2 October, 2020; v1 submitted 22 September, 2020;
originally announced September 2020.
-
Performance Verification of the EXtreme PREcision Spectrograph
Authors:
Ryan T. Blackman,
Debra A. Fischer,
Colby A. Jurgenson,
David Sawyer,
Tyler M. McCracken,
Andrew E. Szymkowiak,
Ryan R. Petersburg,
J. M. Joel Ong,
John M. Brewer,
Lily L. Zhao,
Christopher Leet,
Lars A. Buchhave,
René Tronsgaard,
Joe Llama,
Travis Sawyer,
Allen B. Davis,
Samuel H. C. Cabot,
Michael Shao,
Russell Trahan,
Bijan Nemati,
Matteo Genoni,
Giorgio Pariani,
Marco Riva,
Rafael A. Probst,
Ronald Holzwarth
, et al. (3 additional authors not shown)
Abstract:
The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individu…
▽ More
The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm/s, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser frequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on radial velocity precision due to pixel-position non-uniformities (PPNU) and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter-McLaughlin effect.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
A crucial test for astronomical spectrograph calibration with frequency combs
Authors:
Rafael A. Probst,
Dinko Milaković,
Borja Toledo-Padrón,
Gaspare Lo Curto,
Gerardo Avila,
Anna Brucalassi,
Bruno L. Canto Martins,
Izan de Castro Leão,
Massimiliano Esposito,
Jonay I. González Hernández,
Frank Grupp,
Theodor W. Hänsch,
Hanna Kellermann,
Florian Kerber,
Olaf Mandel,
Antonio Manescau,
Eszter Pozna,
Rafael Rebolo,
José Renan de Medeiros,
Tilo Steinmetz,
Alejandro Suárez Mascareño,
Thomas Udem,
Josefina Urrutia,
Yuanjie Wu,
Luca Pasquini
, et al. (1 additional authors not shown)
Abstract:
Laser frequency combs (LFCs) are well on their way to becoming the next-generation calibration sources for precision astronomical spectroscopy. This development is considered key in the hunt for low-mass rocky exoplanets around solar-type stars whose discovery with the radial-velocity method requires cm/s Doppler precision. In order to prove such precise calibration with an LFC, it must be compare…
▽ More
Laser frequency combs (LFCs) are well on their way to becoming the next-generation calibration sources for precision astronomical spectroscopy. This development is considered key in the hunt for low-mass rocky exoplanets around solar-type stars whose discovery with the radial-velocity method requires cm/s Doppler precision. In order to prove such precise calibration with an LFC, it must be compared to another calibrator of at least the same precision. Being the best available spectrograph calibrator, this means comparing it to a second - fully independent - LFC. This test had long been pending, but our installation of two LFCs at the ultra-stable spectrograph HARPS presented the so far unique opportunity for simultaneous calibrations with two separate LFCs. Although limited in time, the test results confirm the 1 cm/s stability that has long been anticipated by the astronomical community.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
LARS - An Absolute Reference Spectrograph for solar observations, Upgrade from a prototype to a turn-key system
Authors:
J. Loehner-Boettcher,
W. Schmidt,
H. -P. Doerr,
T. Kentischer,
T. Steinmetz,
R. A. Probst,
R. Holzwarth
Abstract:
LARS is an Absolute Reference Spectrograph designed for ultra-precise solar observations. The high-resolution echelle spectrograph of the Vacuum Tower Telescope is supported by a state-of-the-art laser frequency comb to calibrate the solar spectrum on an absolute wavelength scale. In this article, we describe the scientific instrument and focus on the upgrades in the last two years to turn the pro…
▽ More
LARS is an Absolute Reference Spectrograph designed for ultra-precise solar observations. The high-resolution echelle spectrograph of the Vacuum Tower Telescope is supported by a state-of-the-art laser frequency comb to calibrate the solar spectrum on an absolute wavelength scale. In this article, we describe the scientific instrument and focus on the upgrades in the last two years to turn the prototype into a turn-key system. The pursued goal was to improve the short-term and long-term stability of the systems, and enable a user-friendly and more versatile operation of the instrument. The first upgrade involved the modernization of the frequency comb. The Fabry-Perot cavities were adjusted to filter to a repetition frequency of 8GHz. A technologically matured photonic crystal fiber was implemented for spectral broadening. The second, quite recent upgrade was performed on the optics feeding the sunlight into a single-mode fiber connected to the spectrograph. A motorized translation stage was deployed to allow the automated selection of three different fields-of-view with diameters of 1", 3", and 10" for the analysis of the solar spectrum. The successful upgrades allow for long-term observations of up to several hours per day with a stable spectral accuracy of 1 m/s limited by the spectrograph. Stable, user-friendly operation of the instrument is supported. The selection of the pre-aligned fiber to change the field of view can now be done within seconds. LARS offers the possibility to observe absolute wavelength positions of spectral lines and Doppler velocities in the solar atmosphere. First results demonstrate the capabilities of the instrument for solar science. The accurate measurement of the solar convection, p-modes, and atmospheric waves will enhance our knowledge of the solar atmosphere and its physical conditions to improve current atmospheric models.
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
Comb-calibrated solar spectroscopy through a multiplexed single-mode fiber channel
Authors:
R A Probst,
L Wang,
H-P Doerr,
T Steinmetz,
T J Kentischer,
G Zhao,
T W Hänsch,
Th Udem,
R Holzwarth,
W Schmidt
Abstract:
We investigate a new scheme for astronomical spectrograph calibration using the laser frequency comb at the Solar Vacuum Tower Telescope on Tenerife. Our concept is based upon a single-mode fiber channel, that simultaneously feeds the spectrograph with comb light and sunlight. This yields nearly perfect spatial mode matching between the two sources. In combination with the absolute calibration pro…
▽ More
We investigate a new scheme for astronomical spectrograph calibration using the laser frequency comb at the Solar Vacuum Tower Telescope on Tenerife. Our concept is based upon a single-mode fiber channel, that simultaneously feeds the spectrograph with comb light and sunlight. This yields nearly perfect spatial mode matching between the two sources. In combination with the absolute calibration provided by the frequency comb, this method enables extremely robust and accurate spectroscopic measurements. The performance of this scheme is compared to a sequence of alternating comb and sunlight, and to absorption lines from Earth's atmosphere. We also show how the method can be used for radial-velocity detection by measuring the well-explored 5-minute oscillations averaged over the full solar disk. Our method is currently restricted to solar spectroscopy, but with further evolving fiber-injection techniques it could become an option even for faint astronomical targets.
△ Less
Submitted 17 February, 2015;
originally announced February 2015.
-
A Frequency Comb calibrated Solar Atlas
Authors:
P. Molaro,
M. Esposito,
S. Monai,
J. I. Gonzalez Hernandez,
T. W. Hansch,
R. Holzwarth,
A. Manescau,
L. Pasquini,
R. A. Probst,
R. Rebolo,
T. Steinmetz,
Th. Udem,
T. Wilken
Abstract:
The solar spectrum is a primary reference for the study of physical processes in stars and their variation during activity cycles. In Nov 2010 an experiment with a prototype of a Laser Frequency Comb (LFC) calibration system was performed with the HARPS spectrograph of the 3.6m ESO telescope at La Silla during which high signal-to-noise spectra of the Moon were obtained. We exploit those Echelle s…
▽ More
The solar spectrum is a primary reference for the study of physical processes in stars and their variation during activity cycles. In Nov 2010 an experiment with a prototype of a Laser Frequency Comb (LFC) calibration system was performed with the HARPS spectrograph of the 3.6m ESO telescope at La Silla during which high signal-to-noise spectra of the Moon were obtained. We exploit those Echelle spectra to study the optical integrated solar spectrum . The DAOSPEC program is used to measure solar line positions through gaussian fitting in an automatic way. We first apply the LFC solar spectrum to characterize the CCDs of the HARPS spectrograph. The comparison of the LFC and Th-Ar calibrated spectra reveals S-type distortions on each order along the whole spectral range with an amplitude of +/-40 m/s. This confirms the pattern found by Wilken et al. (2010) on a single order and extends the detection of the distortions to the whole analyzed region revealing that the precise shape varies with wavelength. A new data reduction is implemented to deal with CCD pixel inequalities to obtain a wavelength corrected solar spectrum. By using this spectrum we provide a new LFC calibrated solar atlas with 400 line positions in the range of 476-530, and 175 lines in the 534-585 nm range. The new LFC atlas improves the accuracy of individual lines by a significant factor reaching a mean value of about 10 m/s. The LFC--based solar line wavelengths are essentially free of major instrumental effects and provide a reference for absolute solar line positions. We suggest that future LFC observations could be used to trace small radial velocity changes of the whole solar photospheric spectrum in connection with the solar cycle and for direct comparison with the predicted line positions of 3D radiative hydrodynamical models of the solar photosphere.
△ Less
Submitted 18 October, 2013;
originally announced October 2013.