Showing 1–47 of 47 results for author: Prieto, P

Standing spin waves in Permalloy-NiO bilayers as a probe of the interfacial exchange coupling

Authors: Diego Caso, Ana García-Prieto, Eugenia Sebastiani-Tofano, Akashdeep Kamra, Cayetano Hernández, Pilar Prieto, Farkhad G. Aliev

Abstract: Ferromagnetic/Antiferromagnetic (FM/AFM) bilayers dynamics have been a recent topic of interest due to the interaction occurring at the interface, where the magnetic moments of the AFM can be imprinted into the FM, and the exchange bias field can affect these dynamics. Here, we investigate Permalloy (Py) and NiO (Py/NiO) hybrids and for comparison single Py films in the broad Py thickness range va… ▽ More Ferromagnetic/Antiferromagnetic (FM/AFM) bilayers dynamics have been a recent topic of interest due to the interaction occurring at the interface, where the magnetic moments of the AFM can be imprinted into the FM, and the exchange bias field can affect these dynamics. Here, we investigate Permalloy (Py) and NiO (Py/NiO) hybrids and for comparison single Py films in the broad Py thickness range varied from few nm to 200 nm by using static (Kerr effect) and dynamic (spin waves) measurements along with micromagnetic simulations. We observe hybrid modes between uniform (ferromagnetic resonance FMR, n=0) and perpendicular standing spin waves (PSSWs, n=1, 2) and a clear enhancement of the PSSWs modes frequencies upon interfacing Py with NiO both from experiments and simulations. This enhancement becomes less pronounced as the thickness of the film increases, demonstrating its interfacial origin rooted in the exchange coupling between the FM and AFM layers. Besides, through micromagnetic simulations, we investigate and correlate changes in spatial profiles of the PSSWs with the interfacial exchange coupling. As the thickness is increased, we see that the n=1 and n=2 modes begin to couple with the fundamental FMR mode, resulting in asymmetric (with respect the Py layer center) modes. Our results suggest that PSSWs detection in a ferromagnet offers a means of probing the interfacial exchange coupling with the adjacent AFM layer. Furthermore, the controlled spatial symmetry breaking by the AFM layer enables engineering of PSSWs with different spatial profiles in the FM. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Comments: 15 pages, 18 figures

FLSH -- Friendly Library for the Simulation of Humans

Authors: Pablo Ramón, Cristian Romero, Javier Tapia, Miguel A. Otaduy

Abstract: Computer models of humans are ubiquitous throughout computer animation and computer vision. However, these models rarely represent the dynamics of human motion, as this requires adding a complex layer that solves body motion in response to external interactions and according to the laws of physics. FLSH is a library that facilitates this task for researchers and developers who are not interested i… ▽ More Computer models of humans are ubiquitous throughout computer animation and computer vision. However, these models rarely represent the dynamics of human motion, as this requires adding a complex layer that solves body motion in response to external interactions and according to the laws of physics. FLSH is a library that facilitates this task for researchers and developers who are not interested in the nuisances of physics simulation, but want to easily integrate dynamic humans in their applications. FLSH provides easy access to three flavors of body physics, with different features and computational complexity: skeletal dynamics, full soft-tissue dynamics, and reduced-order modeling of soft-tissue dynamics. In all three cases, the simulation models are built on top of the pseudo-standard SMPL parametric body model. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Comments: Project website: https://gitlab.com/PabloRamonPrieto/flsh

Journal ref: Proceedings of 3DBODY.TECH 2023 - 14th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Lugano, Switzerland, October 2023

Bespoke scapegoats: Scientific advisory bodies and blame avoidance in the Covid-19 pandemic and beyond

Authors: Roger Koppl, Kira Pronin, Nick Cowen, Marta Podemska-Mikluch, Pablo Paniagua Prieto

Abstract: Scholars have not asked why so many governments created ad hoc scientific advisory bodies (ahSABs) to address the Covid-19 pandemic instead of relying on existing public health infrastructure. We address this neglected question with an exploratory study of the US, UK, Sweden, Italy, Poland, and Uganda. Drawing on our case studies and the blame-avoidance literature, we find that ahSABs are created… ▽ More Scholars have not asked why so many governments created ad hoc scientific advisory bodies (ahSABs) to address the Covid-19 pandemic instead of relying on existing public health infrastructure. We address this neglected question with an exploratory study of the US, UK, Sweden, Italy, Poland, and Uganda. Drawing on our case studies and the blame-avoidance literature, we find that ahSABs are created to excuse unpopular policies and take the blame should things go wrong. Thus, membership typically represents a narrow range of perspectives. An ahSAB is a good scapegoat because it does little to reduce government discretion and has limited ability to deflect blame back to government. Our explanation of our deviant case of Sweden, that did not create and ahSAB, reinforces our general principles. We draw the policy inference that ahSAB membership should be vetted by the legislature to ensure broad membership. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Comments: 2 tables, 1 figure

Quantifying Li-content for compositional tailoring of lithium ferrite ceramics

Authors: C. Granados-Miralles, A. Serrano, P. Prieto, J. Guzmán-Mínguez, J. E. Prieto, A. M. Friedel, E. García-Martín, J. F. Fernández, A. Quesada

Abstract: Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in tur… ▽ More Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in turn, the performance of functional devices based on these materials. Despite this, lithium content is rarely accurately quantified, as a result of the low number of electrons in Li hindering its identification by means of routine materials characterization methods. In the present work, magnetic lithium ferrite powders with Li:Fe ratios of 1:1, 1:3 and 1:5 have been synthesized, successfully obtaining phase-pure materials (LiFeO2 and LiFe5O8), as well as a controlled mixture of both phases. The powders have been compacted and subsequently sintered by thermal treatment (Tmax = 1100 °C) to fabricate dense pellets which preserve the original Li:Fe ratios. Li-content on both powders and pellets has been determined by two independent methods: (i) Rutherford backscattering spectroscopy combined with nuclear reaction analysis and (ii) Rietveld analysis of powder X-ray diffraction data. With good agreement between both techniques, it has been confirmed that the Li:Fe ratios employed in the synthesis are maintained in the sintered ceramics. The same conclusion is drawn from spatially-resolved confocal Raman microscopy experiments on regions of a few microns. Field emission scanning electron microscopy has evidenced the substantial grain growth taking place during the sintering process - mean particle sizes rise from about 600 nm in the powders up to 3.8(6) um for dense LiFeO2 and 10(2) um for LiFe5O8 ceramics. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: J. Eur. Ceram. Soc. 43 (2023) 3351-3359

Tuning the Néel temperature in an antiferromagnet: the case of NixCo1-xO microstructures

Authors: Anna Mandziak, Guiomar D. Soria, José Emilio Prieto, Pilar Prieto, Cecilia Granados-Miralles, Adrian Quesada, Michael Foerster, Lucia Aballe, Juan de la Figuera

Abstract: We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape… ▽ More We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: Sci. Rep. 9 (2019) 13584

A Belief Model for Conflicting and Uncertain Evidence -- Connecting Dempster-Shafer Theory and the Topology of Evidence

Authors: Daira Pinto Prieto, Ronald de Haan, Aybüke Özgün

Abstract: One problem to solve in the context of information fusion, decision-making, and other artificial intelligence challenges is to compute justified beliefs based on evidence. In real-life examples, this evidence may be inconsistent, incomplete, or uncertain, making the problem of evidence fusion highly non-trivial. In this paper, we propose a new model for measuring degrees of beliefs based on possib… ▽ More One problem to solve in the context of information fusion, decision-making, and other artificial intelligence challenges is to compute justified beliefs based on evidence. In real-life examples, this evidence may be inconsistent, incomplete, or uncertain, making the problem of evidence fusion highly non-trivial. In this paper, we propose a new model for measuring degrees of beliefs based on possibly inconsistent, incomplete, and uncertain evidence, by combining tools from Dempster-Shafer Theory and Topological Models of Evidence. Our belief model is more general than the aforementioned approaches in two important ways: (1) it can reproduce them when appropriate constraints are imposed, and, more notably, (2) it is flexible enough to compute beliefs according to various standards that represent agents' evidential demands. The latter novelty allows the users of our model to employ it to compute an agent's (possibly) distinct degrees of belief, based on the same evidence, in situations when, e.g, the agent prioritizes avoiding false negatives and when it prioritizes avoiding false positives. Finally, we show that computing degrees of belief with this model is #P-complete in general. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: To appear in the proceedings of KR 2023

Modal reduction principles across relational semantics

Authors: Willem Conradie, Andrea De Domenico, Krishna Manoorkar, Alessandra Palmigiano, Mattia Panettiere, Daira Pinto Prieto, Apostolos Tzimoulis

Abstract: The present paper establishes systematic connections among the first-order correspondents of Sahlqvist modal reduction principles in various relational semantic settings which include crisp and many-valued Kripke frames, and crisp and many-valued polarity-based frames (aka enriched formal contexts). Building on unified correspondence theory, we aim at introducing a theoretical environment which ma… ▽ More The present paper establishes systematic connections among the first-order correspondents of Sahlqvist modal reduction principles in various relational semantic settings which include crisp and many-valued Kripke frames, and crisp and many-valued polarity-based frames (aka enriched formal contexts). Building on unified correspondence theory, we aim at introducing a theoretical environment which makes it possible to: (a) compare and inter-relate the various frame correspondents (in different relational settings) of any given Sahlqvist modal reduction principle; (b) recognize when first-order sentences in the frame-correspondence languages of different types of relational structures encode the same "modal content"; (c) meaningfully transfer and represent well known relational properties such as reflexivity, transitivity, symmetry, seriality, confluence, density, across different semantic contexts. These results can be understood as a first step in a research program aimed at making correspondence theory not just (methodologically) unified, but also (effectively) parametric. △ Less

Submitted 13 February, 2023; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: This is a revision of the previous version

Magnetic domain wall pinning in cobalt ferrite microstructures

Authors: Sandra Ruiz-Gómez, Anna Mandziak, Laura Martín-García, Jose Emilio Prieto, Pilar Prieto, Carmen Munuera, Michael Foerster, Adrián Quesda, Lucía Aballe, Juan de la Figuera

Abstract: A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared… ▽ More A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands. △ Less

Submitted 12 January, 2022; originally announced January 2022.

Comments: 9 pages, 3 figures

Journal ref: Applied Surface Science 600, 154045 (2022)

RBS/Channeling characterization of Ru(0001) and thin epitaxial Ru/Al$_2$O$_3$(0001) films

Authors: J. E. Prieto, E. M. Trapero, P. Prieto, E. García-Martín, G. D. Soria, P. Galán, J. de la Figuera

Abstract: Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry… ▽ More Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry of He ions both in random and in channeling conditions. We include results of a Ru(0001) single crystal for comparison. Analysis of channeling shows that films thicker than 35 nm grow with (0001) orientation, a well-defined epitaxial relation with the substrate and a high degree of crystal quality, comparable to the Ru(0001) single crystal. Thinner films of down to 7 nm in thickness, for which relaxation of epitaxial strain is not complete, produce a similar degree of dechanneling. The surface of the films can be prepared in a clean and ordered state in order to allow further epitaxial growth on top. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: 8 pages (two columns), 5 figures, submitted to Applied Surface Science

Journal ref: Applied Surface Science 582, 152304 (2022)

Submacropulse electron-beam dynamics correlated with higher-order modes in a Tesla-type cryomodule

Authors: A. H. Lumpkin, R. Thurman-Keup, D. Edstrom, P. Prieto, J. Ruan, B. Jacobson, J. Sikora, J. Diaz-Cruz, A. Edelen, F. Zhou

Abstract: Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the higher-order modes (HOMs) generated in the eight cavities of a cryomodule (CM) due to off-axis steering with correctors located ~4 m upstream of the CM. We have observed c… ▽ More Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the higher-order modes (HOMs) generated in the eight cavities of a cryomodule (CM) due to off-axis steering with correctors located ~4 m upstream of the CM. We have observed correlated submacropulse centroid slews of a few-hundred microns and centroid oscillations at ~240 kHz in the rf BPM data after the CM. The entrance energy into the CM was 25 MeV, and the exit energy was 100 MeV with 125 pC/b and 400 pC/b in 50-bunch pulse trains. These experimental results were evaluated for machine learning training aspects which will be used to inform the commissioning plan for the Linac Coherent Light Source-II injector CM. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Report number: FERMILAB-PUB-21-559-AD

LCLS-II-HE verification cryomodule high gradient performance and quench behavior

Authors: S. Posen, A. Cravatta, M. Checchin, S. Aderhold, C. Adolphsen, T. Arkan, D. Bafia, A. Benwell, D. Bice, B. Chase, C. Contreras-Martinez, L. Dootlittle, J. Fuerst, D. Gonnella, A. Grassellino, C. Grimm, B. Hansen, E. Harms, B. Hartsell, G. Hays, J. Holzbauer, S. Hoobler, J. Kaluzny, T. Khabiboulline, M. Kucera , et al. (21 additional authors not shown)

Abstract: An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipac… ▽ More An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipacting. Dedicated vertical test experiments support the attribution to multipacting. The verification cryomodule achieved an acceleration voltage of 200 MV in continuous wave mode, corresponding to an average accelerating gradient of 24.1 MV/m, significantly exceeding the specification of 173 MV. The average Q0 (3.0x10^10) also exceeded its specification (2.7x10^10). After processing, no field emission was observed up to the maximum gradient of each cavity. This paper reviews the cryomodule performance and discusses operational issues and mitigations implemented during the several month program. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Comments: 15 pages, 24 figures

Sensitivity of the SHiP experiment to dark photons decaying to a pair of charged particles

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani, C. Betancourt , et al. (309 additional authors not shown)

Abstract: Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different pro… ▽ More Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different production mechanisms are simulated, with the dark photons decaying to pairs of visible fermions, including both leptons and quarks. Exclusion contours are presented and compared with those of past experiments. The SHiP detector is expected to have a unique sensitivity for m$_{γ^{\mathrm{D}}}$ ranging between 0.8 and 3.3$^{+0.2}_{-0.5}$ GeV, and $\varepsilon^2$ ranging between $10^{-11}$ and $10^{-17}$. △ Less

Submitted 1 March, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

The gem5 Simulator: Version 20.0+

Authors: Jason Lowe-Power, Abdul Mutaal Ahmad, Ayaz Akram, Mohammad Alian, Rico Amslinger, Matteo Andreozzi, Adrià Armejach, Nils Asmussen, Brad Beckmann, Srikant Bharadwaj, Gabe Black, Gedare Bloom, Bobby R. Bruce, Daniel Rodrigues Carvalho, Jeronimo Castrillon, Lizhong Chen, Nicolas Derumigny, Stephan Diestelhorst, Wendy Elsasser, Carlos Escuin, Marjan Fariborz, Amin Farmahini-Farahani, Pouya Fotouhi, Ryan Gambord, Jayneel Gandhi , et al. (53 additional authors not shown)

Abstract: The open-source and community-supported gem5 simulator is one of the most popular tools for computer architecture research. This simulation infrastructure allows researchers to model modern computer hardware at the cycle level, and it has enough fidelity to boot unmodified Linux-based operating systems and run full applications for multiple architectures including x86, Arm, and RISC-V. The gem5 si… ▽ More The open-source and community-supported gem5 simulator is one of the most popular tools for computer architecture research. This simulation infrastructure allows researchers to model modern computer hardware at the cycle level, and it has enough fidelity to boot unmodified Linux-based operating systems and run full applications for multiple architectures including x86, Arm, and RISC-V. The gem5 simulator has been under active development over the last nine years since the original gem5 release. In this time, there have been over 7500 commits to the codebase from over 250 unique contributors which have improved the simulator by adding new features, fixing bugs, and increasing the code quality. In this paper, we give and overview of gem5's usage and features, describe the current state of the gem5 simulator, and enumerate the major changes since the initial release of gem5. We also discuss how the gem5 simulator has transitioned to a formal governance model to enable continued improvement and community support for the next 20 years of computer architecture research. △ Less

Submitted 29 September, 2020; v1 submitted 6 July, 2020; originally announced July 2020.

Comments: Source, comments, and feedback: https://github.com/darchr/gem5-20-paper

SND@LHC

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, M. Andreini, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani , et al. (319 additional authors not shown)

Abstract: We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)… ▽ More We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: Letter of Intent

Report number: CERN-LHCC-2020-002, LHCC-I-035

SPS Beam Dump Facility -- Comprehensive Design Study

Authors: C. Ahdida, R. G. Alia, G. Arduini, A. Arnalich, P. Avigni, F. Bardou, M. Battistin, J. Bauche, M. Brugger, J. Busom, M. Calviani, M. Casolino, N. Colonna, L. Dougherty, Y. Dutheil, E. Fornasiere, M. A. Fraser, L. Gatignon, J. Gall, S. Gilardoni, B. Goddard, J-L. Grenard, D. Grenier, C. Hessler, R. Jacobsson , et al. (23 additional authors not shown)

Abstract: The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector… ▽ More The proposed Beam Dump Facility (BDF) is foreseen to be located at the North Area of the SPS. It is designed to be able to serve both beam dump like and fixed target experiments. The SPS and the new facility would offer unique possibilities to enter a new era of exploration at the intensity frontier. Possible options include searches for very weakly interacting particles predicted by Hidden Sector models, and flavour physics measurements. In the first instance, exploitation of the facility, in beam dump mode, is envisaged to be for the Search for Hidden Particle (SHiP) experiment. Following the first evaluation of the BDF in 2014-2016, CERN management launched a Comprehensive Design Study over three years for the facility. The BDF study team has since executed an in-depth feasibility study of proton delivery to target, the target complex, and the underground experimental area, including prototy** of key sub-systems and evaluations of the radiological aspects and safety. A first iteration of detailed integration and civil engineering studies have been performed in order to produce a realistic schedule and cost. This document gives a detailed overview of the proposed facility together with the results of the studies, and draws up a possible road map for a three-year Technical Design Report phase, followed by a 5 to 6 year construction phase. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Comments: 589 pages

Report number: CERN-PBC-REPORT-2019-005; CERN-2020-002

Accuracy vs. Computational Cost Tradeoff in Distributed Computer System Simulation

Authors: Adrian Colaso, Pablo Prieto, Jose-Angel Herrero, Pablo Abad, Valentin Puente, Jose-Angel Gregorio

Abstract: Simulation is a fundamental research tool in the computer architecture field. These kinds of tools enable the exploration and evaluation of architectural proposals capturing the most relevant aspects of the highly complex systems under study. Many state-of-the-art simulation tools focus on single-system scenarios, but the scalability required by trending applications has shifted towards distribute… ▽ More Simulation is a fundamental research tool in the computer architecture field. These kinds of tools enable the exploration and evaluation of architectural proposals capturing the most relevant aspects of the highly complex systems under study. Many state-of-the-art simulation tools focus on single-system scenarios, but the scalability required by trending applications has shifted towards distributed computing systems integrated via complex software stacks. Web services with client-server architectures or distributed storage and processing of scale-out data analytics (Big Data) are among the main exponents. The complete simulation of a distributed computer system is the appropriate methodology to conduct accurate evaluations. Unfortunately, this methodology could have a significant impact on the already large computational effort derived from detailed simulation. In this work, we conduct a set of experiments to evaluate this accuracy/cost tradeoff. We measure the error made if client-server applications are evaluated in a single-node environment, as well as the overhead induced by the methodology and simulation tool employed for multi-node simulations. We quantify this error for different micro-architecture components, such as last-level cache and instruction/data TLB. Our findings show that accuracy loss can lead to completely wrong conclusions about the effects of proposed hardware optimizations. Fortunately, our results also demonstrate that the computational overhead of a multi-node simulation framework is affordable, suggesting multi-node simulation as the most appropriate methodology. △ Less

Submitted 24 January, 2019; originally announced February 2019.

Comments: 10 pages, 11 figures

Submacropulse Electron-Beam Dynamics Correlated With Higher-Order Modes In Tesla-Type Superconducting RF Cavities

Authors: A. H. Lumpkin, R. Thurman-Keup, D. Edstrom, J. Ruan, N. Eddy, P. Prieto, O. Napoly, B. E. Carlsten, K. Bishofberger

Abstract: We report the direct observations of sub-macropulse beam centroid oscillations correlated with higher order modes (HOMs) which were generated by off-axis electron beam steering in TESLA-type superconducting RF cavities. The experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility using its unique configuration of a photocathode rf gun injecting beam into two se… ▽ More We report the direct observations of sub-macropulse beam centroid oscillations correlated with higher order modes (HOMs) which were generated by off-axis electron beam steering in TESLA-type superconducting RF cavities. The experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility using its unique configuration of a photocathode rf gun injecting beam into two separated 9-cell cavities in series with corrector magnets and beam position monitors (BPMs) located before, between, and after them. Oscillations of ~100 kHz in the vertical plane and ~380 kHz in the horizontal plane with up to 600-μm amplitudes were observed in a 3-MHz micropulse repetition rate beam with charges of 100, 300, 500, and 1000 pC/b. However, the effects were much reduced at 100 pC/b. The measurements were based on HOM detector circuitry targeting the first and second dipole passbands, rf BPM bunch-by-bunch array data, imaging cameras, and a framing camera. Calculations reproduced the oscillation frequencies of the phenomena in the vertical case. In principle, these fundamental results may be scaled to cryomodule configurations of major accelerator facilities. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: 17 pp

Report number: Fermilab-Pub-18-044-AD-APC

Journal ref: Phys.Rev.Accel.Beams 21 (2018) 064401

MuSCAT2: four-color Simultaneous Camera for the 1.52-m Telescopio Carlos Sánchez

Authors: Norio Narita, Akihiko Fukui, Nobuhiko Kusakabe, Noriharu Watanabe, Enric Palle, Hannu Parviainen, Pilar Montañés-Rodríguez, Felipe Murgas, Matteo Monelli, Marta Aguiar, Jorge Andres Perez Prieto, Álex Oscoz, Jerome de Leon, Mayuko Mori, Motohide Tamura, Tomoyasu Yamamuro, Victor J. S. Béjar, Nicolas Crouzet, Diego Hidalgo, Peter Klagyivik, Rafael Luque, Taku Nishiumi

Abstract: We report the development of a 4-color simultaneous camera for the 1.52~m Telescopio Carlos Sánchez (TCS) in the Teide Observatory, Canaries, Spain. The new instrument, named MuSCAT2, has a capability of 4-color simultaneous imaging in $g$ (400--550 nm), $r$ (550--700 nm), $i$ (700--820 nm), and $z_s$ (820--920 nm) bands. MuSCAT2 equips four 1024$\times$1024 pixel CCDs, having a field of view of 7… ▽ More We report the development of a 4-color simultaneous camera for the 1.52~m Telescopio Carlos Sánchez (TCS) in the Teide Observatory, Canaries, Spain. The new instrument, named MuSCAT2, has a capability of 4-color simultaneous imaging in $g$ (400--550 nm), $r$ (550--700 nm), $i$ (700--820 nm), and $z_s$ (820--920 nm) bands. MuSCAT2 equips four 1024$\times$1024 pixel CCDs, having a field of view of 7.4$\times$7.4 arcmin$^2$ with a pixel scale of 0.44 arcsec per pixel. The principal purpose of MuSCAT2 is to perform high-precision multi-color exoplanet transit photometry. We have demonstrated photometric precisions of 0.057%, 0.050%, 0.060%, and 0.076% as root-mean-square residuals of 60~s binning in $g$, $r$, $i$ and $z_s$ bands, respectively, for a G0 V star WASP-12 ($V=11.57\pm0.16$). MuSCAT2 has started science operations since January 2018, with over 250 telescope nights per year. MuSCAT2 is expected to become a reference tool for exoplanet transit observations, and will substantially contribute to the follow-up of the TESS and PLATO space missions. △ Less

Submitted 29 December, 2018; v1 submitted 5 July, 2018; originally announced July 2018.

Comments: 21 pages, 13 figures, 5 tables, Published in JATIS on Dec 27, 2018, the open access article is available http://dx.doi.org/10.1117/1.JATIS.5.1.015001

Journal ref: J. of Astronomical Telescopes, Instruments, and Systems, 5(1), 015001 (2018)

Commissioning And First Results From The Fermilab Cryomodule Test Stand

Authors: E. R. Harms, M. Awida, C. Baffes, K. Carlson, S. Chandrasekaran, B. Chase, E. Cullerton, J. Edelen, J. Einstein-Curtis, C. Ginsburg, A. Grassellino, B. Hansen, J. Holzbauer, S. Kazakov, T. Khabiboulline, M. Kucera, J. Leibfritz, A. Lunin, D. McDowell, M. McGee, D. Nicklaus, D. Orris, J. Ozelis, J. Patrick, T. Petersen , et al. (12 additional authors not shown)

Abstract: A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overv… ▽ More A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: 4 pp. Proceedings of LINAC2016, East Lansing, MI, USA

Report number: Fermilab-Conf-16-744-AD-APC-TD

Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab

Authors: R. Thurman-Keup, M. Alvarez, J. Fitzgerald, C. Lundberg, P. Prieto, J. Zagel, W. Blokland

Abstract: The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at… ▽ More The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and a similar device has been installed in the Main Injector at Fermilab. Commissioning of the device is in progress with the goal of having it operational by the end of the year. The status of the commissioning and initial results will be presented. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Comments: 5 pp. arXiv admin note: substantial text overlap with arXiv:1511.02132

Report number: Fermilab-Conf-17-368-AD

Diagnostics upgrades for investigations of HOM effects in Tesla-type SCRF cavities

Authors: A. H. Lumpkin, D. Edstrom Jr., J. Ruan, R. Thurman-Keup, Y. Shin, P. Prieto, N. Eddy, B. E. Carlsten

Abstract: We describe the upgrades to diagnostic capabilities on the Fermilab Accelerator Science and Technology (FAST) electron linear accelerator that will allow investigations of the effects of high-order modes (HOMs) in SCRF cavities on macropulse-average beam quality. We examine the dipole modes in the first pass-band generally observed in the 1.6-1.9 GHz regime for TESLA-type SCRF cavities due to unif… ▽ More We describe the upgrades to diagnostic capabilities on the Fermilab Accelerator Science and Technology (FAST) electron linear accelerator that will allow investigations of the effects of high-order modes (HOMs) in SCRF cavities on macropulse-average beam quality. We examine the dipole modes in the first pass-band generally observed in the 1.6-1.9 GHz regime for TESLA-type SCRF cavities due to uniform transverse beam offsets of the electron beam. Such cavities are the basis of the accelerators such as the European XFEL and the proposed MaRIE XFEL facility. Preliminary HOM detector data, prototype BPM test data, and first framing camera OTR data with ~20 micron spatial resolution at 250 pC per bunch will be presented. △ Less

Submitted 2 March, 2018; originally announced March 2018.

Comments: 4 pp

Report number: Fermilab-Conf-17-356-AD

Fermilab Cryomodule Test Stand RF Interlock System

Authors: T. Petersen, J. S. Diamond, D. McDowell, D. Nicklaus, P. S. Prieto, A. Semenov

Abstract: An interlock system has been designed for the Fermilab Cryo-module Test Stand (CMTS), a test bed for the cryomodules to be used in the upcoming Linac Coherent Light Source 2 (LCLS-II) project at SLAC. The interlock system features 8 independent subsystems, one per superconducting RF cavity and solid state amplifier (SSA) pair. Each system monitors several devices to detect fault conditions such as… ▽ More An interlock system has been designed for the Fermilab Cryo-module Test Stand (CMTS), a test bed for the cryomodules to be used in the upcoming Linac Coherent Light Source 2 (LCLS-II) project at SLAC. The interlock system features 8 independent subsystems, one per superconducting RF cavity and solid state amplifier (SSA) pair. Each system monitors several devices to detect fault conditions such as arcing in the waveguides or quenching of the SRF system. Additionally each system can detect fault conditions by monitoring the RF power seen at the cavity coupler through a directional coupler. In the event of a fault condition, each system is capable of removing RF signal to the amplifier (via a fast RF switch) as well as turning off the SSA. Additionally, each input signal is available for remote viewing and recording via a Fermilab designed digitizer board and MVME 5500 processor. △ Less

Submitted 28 April, 2017; originally announced May 2017.

Comments: 3 pp

Report number: Fermilab-Conf-16-432-AD

Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results

Authors: T. Petersen, J. Diamond, N. Liu, P. S. Prieto, D. Slimmer, A. Watts

Abstract: The readout electronics for the resonant beam position monitors (BPMs) in the Fermilab Switchyard (SY) have been upgraded, utilizing a low noise amplifier transition board and Fermilab designed digitizer boards. The stripline BPMs are estimated to have an average signal output of between -110 dBm and -80 dBm, with an estimated peak output of -70 dBm. The external resonant circuit is tuned to the S… ▽ More The readout electronics for the resonant beam position monitors (BPMs) in the Fermilab Switchyard (SY) have been upgraded, utilizing a low noise amplifier transition board and Fermilab designed digitizer boards. The stripline BPMs are estimated to have an average signal output of between -110 dBm and -80 dBm, with an estimated peak output of -70 dBm. The external resonant circuit is tuned to the SY machine frequency of 53.10348 MHz. Both the digitizer and transition boards have variable gain in order to accommodate the large dynamic range and irregularity of the resonant extraction spill. These BPMs will aid in auto-tuning of the SY beamline as well as enabling operators to monitor beam position through the spill. △ Less

Submitted 3 January, 2017; originally announced January 2017.

Comments: 3 pp

Report number: Fermilab-Conf-16-430-AD

Cross sections of X-ray production induced by C and Si ions with energies up to 1 MeV/u on Ti, Fe, Zn, Nb, Ru and Ta

Authors: J. E. Prieto, A. Zucchiatti, P. Galán, P. Prieto

Abstract: X-ray production differential cross sections induced by C and Si ions with energies from 1 MeV/u down to 0.25 MeV/u, produced by the CMAM 5 MV tandem accelerator, have been measured for thin targets of Ti, Fe, Zn, Nb, Ru and Ta in a direct way. X-rays have been detected by a fully characterized silicon drift diode and beam currents have been measured by a system of two Faraday cups. Measured cross… ▽ More X-ray production differential cross sections induced by C and Si ions with energies from 1 MeV/u down to 0.25 MeV/u, produced by the CMAM 5 MV tandem accelerator, have been measured for thin targets of Ti, Fe, Zn, Nb, Ru and Ta in a direct way. X-rays have been detected by a fully characterized silicon drift diode and beam currents have been measured by a system of two Faraday cups. Measured cross sections agree in general with previously published results. The ECPSSR theory with the united atoms correction gives absolute values close to the experimental ones for all the studied elements excited by C ions and for Ta, Nb and Ru excited by Si ions. For Ti, Fe and Zn excited by Si, the basic ECPSSR theory gives better agreement, although on absolute values the gap for Ti is still large. △ Less

Submitted 28 November, 2016; originally announced November 2016.

Comments: 11 pages, 2 tables, 7 figures. Contribution to the 12th. European Conference on Accelerators in Applied Research and Technology (ECAART 12) held in Jyväskylä, Finland, 3-8 July 2016

Journal ref: Nucl. Instrum. Methods B 406, 167 (2017)

Installation status of the electron beam profiler for the Fermilab Main Injector

Authors: R. Thurman-Keup, M. Alvarez, J. Fitzgerald, C. Lundberg, P. Prieto, M. Roberts, J. Zagel, W. Blokland

Abstract: The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at… ▽ More The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and the installation of a similar device is underway in the Main Injector at Fermilab. The present installation status of the electron beam profiler for the Main Injector will be discussed together with some simulations and test stand results. △ Less

Submitted 6 November, 2015; originally announced November 2015.

Comments: 5 pp

Report number: FERMILAB-CONF-15-409-AD

The NuMI Neutrino Beam

Authors: P. Adamson, K. Anderson, M. Andrews, R. Andrews, I. Anghel, D. Augustine, A. Aurisano, S. Avvakumov, D. S. Ayres, B. Baller, B. Barish, G. Barr, W. L. Barrett, R. H. Bernstein, J. Biggs, M. Bishai, A. Blake, V. Bocean, G. J. Bock, D. J. Boehnlein, D. Bogert, K. Bourkland, S. V. Cao, C. M. Castromonte, S. Childress , et al. (165 additional authors not shown)

Abstract: This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance,… ▽ More This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance, are also discussed. △ Less

Submitted 29 July, 2015; v1 submitted 23 July, 2015; originally announced July 2015.

Beam Position Monitor Electronics Upgrade for Fermilab Switchyard

Authors: P. Stabile, J. S. Diamond, J. A. Fitzgerald, N. Liu, D. K. Morris, P. S. Prieto, J. P. Seraphin

Abstract: The beam position monitor (BPM) system for Fermilab Switchyard (SY) provides the position, intensity and integrated intensity of the 53.10348 MHz RF bunched resonant extracted beam from the Main Injector over 4 seconds of spill. The total beam intensity varies from 1x10^11 to 1x10^13 protons. The spill is measured by stripline beam postion monitors and resonant circuit. The BPMs have an external r… ▽ More The beam position monitor (BPM) system for Fermilab Switchyard (SY) provides the position, intensity and integrated intensity of the 53.10348 MHz RF bunched resonant extracted beam from the Main Injector over 4 seconds of spill. The total beam intensity varies from 1x10^11 to 1x10^13 protons. The spill is measured by stripline beam postion monitors and resonant circuit. The BPMs have an external resonant circuit tuned to 53.10348 MHz. The corresponding voltage signal out of the BPM has been estimated to be between -110 dBm and -80 dBm. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 4 pp

Report number: FERMILAB-CONF-14-328-AD

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. Röhrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1

ConGUSTo: (HT)Condor Graphical Unified Supervising Tool

Authors: Antonio Dorta, Nicola Caon, Jorge Andres Perez Prieto

Abstract: HTCondor is a distributed job scheduler developed by the University of Wisconsin-Madison, which allows users to run their applications in other users' machines when they are not being used, thus providing a considerably increase in the overall computational power and a more efficient use of the computing resources. Our institution has been successfully using HTCondor for more than ten years, and H… ▽ More HTCondor is a distributed job scheduler developed by the University of Wisconsin-Madison, which allows users to run their applications in other users' machines when they are not being used, thus providing a considerably increase in the overall computational power and a more efficient use of the computing resources. Our institution has been successfully using HTCondor for more than ten years, and HTCondor is nowadays the most used Supercomputing resource we have. Although HTCondor provides a wide range of tools and options for its management and administration, there are currently no tools that can show detailed usage information and statistics in a clear, easy to interpret, interactive set of graphics displays. For this reason, we have developed ConGUSTo, a web-based tool that allows to collect HTCondor usage and statistics data in an easy way, and present them using a variety of tabular and graphics charts. △ Less

Submitted 18 December, 2014; originally announced December 2014.

Comments: 8 pages, 10 figures

First Operation of an Ungated Diamond Field-Emission Array Cathode in a L-Band Radiofrequency Electron Source

Authors: P. Piot, C. A. Brau, B. K. Choi, B. Blomberg, W. E. Gabella, B. Ivanov, J. Jarvis, M. H. Mendenhall, D. Mihalcea, S. Panuganti, P. Prieto, J. Reid

Abstract: We report on the first successful operation of a field-emitter-array cathode in a conventional L-band radio-frequency electron source. The cathode consisted of an array of $\sim 10^6$ diamond diamond tips on pyramids. Maximum current on the order of 15~mA were reached and the cathode did not show appreciable signs of fatigue after weeks of operation. The measured Fowler-Nordheim characteristics, t… ▽ More We report on the first successful operation of a field-emitter-array cathode in a conventional L-band radio-frequency electron source. The cathode consisted of an array of $\sim 10^6$ diamond diamond tips on pyramids. Maximum current on the order of 15~mA were reached and the cathode did not show appreciable signs of fatigue after weeks of operation. The measured Fowler-Nordheim characteristics, transverse beam density, and current stability are discussed. Numerical simulations of the beam dynamics are also presented. △ Less

Submitted 27 February, 2014; originally announced February 2014.

Comments: 4 pages, 7 figures; preprint submitted to Applied Physics Letters

Report number: FERMILAB-PUB-13-323-APC

Journal ref: Appl. Phys. Lett. 104, 263504 (2014)

Test Results of Tesla-Style Cryomodules at Fermilab

Authors: E. Harms, K. Carlson, B. Chase, D. Crawford, E. Cullerton, D. Edstrom, A. Hocker, M. Kucera, J. Leibfritz, O. Nezhevenko, D. Nicklaus, Y. Pischalnikov, P. Prieto, J. Reid, W. Schappert, P. Varghese

Abstract: Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of the… ▽ More Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of these cryomodules. △ Less

Submitted 31 January, 2013; originally announced January 2013.

Comments: 3 pp

Report number: FERMILAB-CONF-12-515-AD-TD

Mu2e Conceptual Design Report

Authors: The Mu2e Project, Collaboration, :, R. J. Abrams, D. Alezander, G. Ambrosio, N. Andreev, C. M. Ankenbrandt, D. M. Asner, D. Arnold, A. Artikov, E. Barnes, L. Bartoszek, R. H. Bernstein, K. Biery, V. Biliyar, R. Bonicalzi, R. Bossert, M. Bowden, J. Brandt, D. N. Brown, J. Budagov, M. Buehler, A. Burov, R. Carcagno , et al. (203 additional authors not shown)

Abstract: Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe… ▽ More Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 562 pages, 339 figures

Report number: Fermilab-TM-2545

Tevatron Beam Position Monitor Upgrade

Authors: G. Annala, B. Banerjee, B. Barker, T. Boes, M. Bowden, C. Briegel, G. Cancelo, G. Duerling, B. Forster, S. Foulkes, B. Haynes, B. Hendricks, T. Kasza, R. Kutschke, R. Mahlum, M. Martens, M. Olson, V. Pavlicek, L. Piccoli, P. Prieto, J. Steimel, K. Treptow, M. Votava, D. Voy, M. Wendt , et al. (2 additional authors not shown)

Abstract: This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. △ Less

Submitted 26 September, 2012; originally announced September 2012.

Comments: 20 pp

Report number: FERMILAB-PUB-11-588-AD

Journal ref: JINST 6 (2011) T11005

A Wire Position Monitor System for the 1.3 GHZ Tesla-Style Cryomodule at the Fermilab New-Muon-Lab Accelerator

Authors: N. Eddy, B. Fellenz, P. Prieto, A. Semenov, D. C. Voy, M. Wendt

Abstract: The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF accelerating cavities is measured along the ~15 m long module using a stretched-wire position monitoring system. An overview of the wire position monitor syste… ▽ More The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF accelerating cavities is measured along the ~15 m long module using a stretched-wire position monitoring system. An overview of the wire position monitor system technology is given, along with preliminary results taken at the initial module cool down, and during further testing. As the measurement system offers a high resolution, we also discuss options for use as a vibration detector. △ Less

Submitted 21 September, 2012; originally announced September 2012.

Comments: 4 pp. 15th International Conference on RF Superconductivity (SRF2011). 25-29 Jul 2011. Chicago, Illinois, USA

Report number: FERMILAB-CONF-11-382-AD

High Resolution BPM Upgrade for the ATF Dam** Ring at KEK

Authors: N. Eddy, C. Briegel, B. Fellenz, E. Gianfelice-Wendt, P. Prieto, R. Rechenmacher, A. Semenov, D. Voy, M. Wendt, D. Zhang, N. Terunuma, J. Urakawa

Abstract: A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The techni… ▽ More A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The technical concept and realization as well as results of beam studies are presented. △ Less

Submitted 20 September, 2012; originally announced September 2012.

Comments: 3 pp. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators DIPAC 2011, 16-18 May 2011. Hamburg, Germany

Report number: FERMILAB-CONF-11-383-AD

RF Test Results from Cryomodule 1 at the Fermilab SRF Beam Test Facility

Authors: E. Harms, K. Carlson, B. Chase, E. Cullerton, A. Hocker, C. Jensen, P. Joireman, A. Klebaner, T. Kubicki, M. Kucera, A. Legan, J. Leibfritz, A. Martinez, M. McGee, S. Nagaitsev, O. Nezhevenko, D. Nicklaus, H. Pfeffer, Y. Pischalnikov, P. Prieto, J. Reid, W. Schappert, V. Tupikov, P. Varghese, J. Branlard

Abstract: Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab. Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab. △ Less

Submitted 18 September, 2012; originally announced September 2012.

Comments: 4 pp. 15th International Conference on RF Superconductivity (SRF2011). 25-29 Jul 2011. Chicago, Illinois, USA

Report number: FERMILAB-CONF-11-352-AD-TD

AOLI-- Adaptive Optics Lucky Imager: Diffraction Limited Imaging in the Visible on Large Ground-Based Telescopes

Authors: Craig Mackay, Rafael Rebolo-López, Bruno Femenia Castellá, Jonathan Crass, David L. King, Lucas Labadie, Peter Aisher, Antonio Pérez Garrido, Marc Balcells, Anastasio Díaz-Sánchez, Jesús Jimenez Fuensalida, Roberto L. Lopez, Alejandro Oscoz, Jorge A. Pérez Prieto, Luis F. Rodríguez-Ramos, Isidro Villó

Abstract: The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors a… ▽ More The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space. △ Less

Submitted 17 July, 2012; originally announced July 2012.

Comments: SPIE vol 8446, 2012

The AOLI low-order non-linear curvature wavefront sensor: a method for high sensitivity wavefront reconstruction

Authors: Jonathan Crass, Peter Aisher, Bruno Femenia, David L. King, Craig D. Mackay, Rafael Rebolo-López, Lucas Labadie, Antonio Pérez Garrido, Marc Balcells, Anastasio Díaz Sánchez, Jesús Jimenez Fuensalida, Roberto L. Lopez, Alejandro Oscoz, Jorge A. Pérez Prieto, Luis F. Rodríguez-Ramos, Isidro Villó

Abstract: The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the o… ▽ More The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the optical design of the wavefront sensor where two photoncounting CCDs provide a total of four reference images. Simulations of the optical characteristics of the system are discussed, with their relevance to low and high order AO systems. The development and optimisation of high-speed wavefront reconstruction algorithms are presented. Finally we discuss the results of simulations to demonstrate the sensitivity of the system. △ Less

Submitted 4 July, 2012; originally announced July 2012.

Comments: 10 pages. To be published in Proc SPIE 8447: Adaptive Optics Systems III

Report number: 84470T

Journal ref: Proc. SPIE 8447(2012), Adaptive Optics Systems III

IACTalks: an on-line archive of astronomy-related seminars

Authors: Johan H. Knapen, Jorge A. Pérez Prieto, Tariq Shahbaz, Anna Ferré-Mateu, Nicola Caon, Cristina Ramos Almeida, Brandon Tingley, Valentina Luridiana, Inés Flores-Cacho, Orlagh Creevey, Arturo Manchado Torres, Ignacio Trujillo, Maria Rosa Zapatero Osorio, Francisco Sánchez Martínez, Francisco López Molina, Gabriel Pérez Díaz, Miguel Briganti, Inés Bonet

Abstract: We present IACTalks, a free and open access seminars archive (http://iactalks.iac.es) aimed at promoting astronomy and the exchange of ideas by providing high-quality scientific seminars to the astronomical community. The archive of seminars and talks given at the Instituto de Astrofiísica de Canarias goes back to 2008. Over 360 talks and seminars are now freely available by streaming over the int… ▽ More We present IACTalks, a free and open access seminars archive (http://iactalks.iac.es) aimed at promoting astronomy and the exchange of ideas by providing high-quality scientific seminars to the astronomical community. The archive of seminars and talks given at the Instituto de Astrofiísica de Canarias goes back to 2008. Over 360 talks and seminars are now freely available by streaming over the internet. We describe the user interface, which includes two video streams, one showing the speaker, the other the presentation. A search function is available, and seminars are indexed by keywords and in some cases by series, such as special training courses or the 2011 Winter School of Astrophysics, on secular evolution of galaxies. The archive is made available as an open resource, to be used by scientists and the public. △ Less

Submitted 27 June, 2012; originally announced June 2012.

Comments: 2 pages, 2 figures

Blue not brown: UKIDSS T dwarfs with suppressed K-band flux

Authors: D. N. Murray, B. Burningham, H. R. A Jones, D. J. Pinfield, P. W. Lucas, S. K. Leggett, C. G. Tinney, A. C. Day-Jones, D. J. Weights, N. Lodieu, J. A. Perez Prieto, E. Nickson, Z. H. Zhang, J. R. A. Clarke, J. S. Jenkins, M. Tamura

Abstract: We have used blue near-infrared colours to select a group of 12 spectroscopically-confirmed UKIDSS T dwarfs later than T4. From amongst these we identify the first two kinematic halo T-dwarf candidates. Blue near-infrared colours have been attributed to collisionally-induced hydrogen absorption, which is enhanced by either high surface gravity or low metallicity. Proper motions are measured and di… ▽ More We have used blue near-infrared colours to select a group of 12 spectroscopically-confirmed UKIDSS T dwarfs later than T4. From amongst these we identify the first two kinematic halo T-dwarf candidates. Blue near-infrared colours have been attributed to collisionally-induced hydrogen absorption, which is enhanced by either high surface gravity or low metallicity. Proper motions are measured and distances estimated, allowing the determination of tangential velocities. U and V components are estimated for our objects by assuming radial velocity = 0 km/s. From this, ULAS J0926+0835 is found to have U=62 km/s and V=-140km/s and ULAS J1319+1209 is found to have U=192 km/s and V=-92 km/s. These values are consistent with potential halo membership. However, these are not the bluest objects in our selection. The bluest is ULAS J1233+1219, with J-K=-1.16 +/- 0.07, and surprisingly this object is found to have young disc-like U and V. Our sample also contains Hip 73786B, companion to the metal-poor K5 dwarf Hip 73786. Hip 73786 is a metal-poor star, with [Fe/H]=-0.3 and is located at a distance of 19 pc. U, V, W space velocity components are calculated for Hip 73786A and B, finding that U=-48 +/- 7 km/s, V=-75 +/- 4 km/s and W=-44 +/- 8 km/s. From the properties of the primary, Hip 73786B is found to be at least 1.6 Gyr old. As a metal poor object, Hip 73786B represents an important addition to the sample of known T dwarf benchmarks. △ Less

Submitted 25 January, 2011; originally announced January 2011.

Comments: 16 pages, 7 figures, accepted by MNRAS

Revisiting the effect of H2, HD and LiH molecules in the cooling of primordial gas

Authors: Joaquin P. Prieto, Leopoldo Infante, Raul Jimenez

Abstract: We use a non-equilibrium chemical network to revisit and study the effect of H_{2}, HD and LiH molecular cooling on a primordial element of gas. We solve both the thermal and chemical equations for a gas element with an initial temperature T\approx 1000K and a gas number density in the range n_{tot}=1-10^{4} cm^{-3}. At low densities, n_{tot}<10^{2} cm^{-3}, the gas reaches temperatures \sim 100… ▽ More We use a non-equilibrium chemical network to revisit and study the effect of H_{2}, HD and LiH molecular cooling on a primordial element of gas. We solve both the thermal and chemical equations for a gas element with an initial temperature T\approx 1000K and a gas number density in the range n_{tot}=1-10^{4} cm^{-3}. At low densities, n_{tot}<10^{2} cm^{-3}, the gas reaches temperatures \sim 100K and the main coolant is H_{2}, but at higher densities, n_{tot}>10^{2} cm^{-3}, the HD molecule dominates the gas temperature evolution. The effect of LiH is negligible in all cases. We studied the effect of D abundance on the gas cooling. The D abundance was set initially to be in the range n_{D}/n_{H}=10^{-7}-10^{-4.5}, with n_{HD}/n_{H}={D^{+}}/n_{H}=10^{-10}. The simulations show that at n_{tot}>10^{2} cm^{-3} the HD cooling dominates the temperature evolution for D abundances greater than 10^{-5}n_{H}. This number decrease at higher densities. Furthermore, we studied the effect of electrons and ionized particules on the gas temperature. We followed the gas temperature evolution with n_{H_{+}}/n_{H}=10^{-4}-10^{-1} and n_{D^{+}}/n_{H^{+}}=10^{-5}. The gas temperature reached lower values at high ionization degree because electrons, H^{+} and D^{+} are catalizers in the formation paths of the H_{2} and HD molecules, which are the main coolers at low temperatures. Finaly, we studied the effect of an OB star, with T_{eff}=4\times 10^{4}K, would have on gas cooling. It is very difficult for a gas with n_{tot} in the range between 1-100 cm^{-3} to drop its temperature if the star is at a distance less than 100 pc. △ Less

Submitted 13 February, 2009; v1 submitted 16 September, 2008; originally announced September 2008.

Operational aspects of the Main Injector large aperture quadrupole (WQB)

Authors: W. Chou, L. Bartelson, B. Brown, D. Capista, J. Crisp, J. DiMarco, J. Fitzgerald, H. Glass, D. Harding, D. Johnson, V. Kashikhin, I. Kourbanis, P. Prieto, W. Robotham, T. Sager, M. Tartaglia, L. Valerio, R. Webber, M. Wendt, D. Wolff, M. Yang

Abstract: A two-year Large Aperture Quadrupole (WQB) Project was completed in the summer of 2006 at Fermilab. Nine WQBs were designed, fabricated and bench-tested by the Technical Division. Seven of them were installed in the Main Injector and the other two for spares. They perform well. The aperture increase meets the design goal and the perturbation to the lattice is minimal. The machine acceptance in t… ▽ More A two-year Large Aperture Quadrupole (WQB) Project was completed in the summer of 2006 at Fermilab. Nine WQBs were designed, fabricated and bench-tested by the Technical Division. Seven of them were installed in the Main Injector and the other two for spares. They perform well. The aperture increase meets the design goal and the perturbation to the lattice is minimal. The machine acceptance in the injection and extraction regions is increased from 40pi to 60pi mm-mrad. This paper gives a brief report of the operation and performance of these magnets. △ Less

Submitted 26 February, 2008; originally announced February 2008.

Comments: 2007 Particle Accelerator Conference (PAC07)

Report number: FERMILAB-CONF-07-344-AD

Journal ref: Conf.Proc.C070625:1685,2007

Hall drift of axisymmetric magnetic fields in solid neutron-star matter

Authors: Andreas Reisenegger, Rafael Benguria, Joaquin P. Prieto, Pablo A. Araya, Dong Lai

Abstract: Hall drift, i. e., transport of magnetic flux by the moving electrons giving rise to the electrical current, may be the dominant effect causing the evolution of the magnetic field in the solid crust of neutron stars. It is a nonlinear process that, despite a number of efforts, is still not fully understood. We use the Hall induction equation in axial symmetry to obtain some general properties of… ▽ More Hall drift, i. e., transport of magnetic flux by the moving electrons giving rise to the electrical current, may be the dominant effect causing the evolution of the magnetic field in the solid crust of neutron stars. It is a nonlinear process that, despite a number of efforts, is still not fully understood. We use the Hall induction equation in axial symmetry to obtain some general properties of nonevolving fields, as well as analyzing the evolution of purely toroidal fields, their poloidal perturbations, and current-free, purely poloidal fields. We also analyze energy conservation in Hall instabilities and write down a variational principle for Hall equilibria. We show that the evolution of any toroidal magnetic field can be described by Burgers' equation, as previously found in plane-parallel geometry. It leads to sharp current sheets that dissipate on the Hall time scale, yielding a stationary field configuration that depends on a single, suitably defined coordinate. This field, however, is unstable to poloidal perturbations, which grow as their field lines are stretched by the background electron flow, as in instabilities earlier found numerically. On the other hand, current-free poloidal configurations are stable and could represent a long-lived crustal field supported by currents in the fluid stellar core. △ Less

Submitted 29 June, 2007; v1 submitted 14 May, 2007; originally announced May 2007.

Comments: 8 pages, 5 figure panels; new version with very small correction; accepted by Astronomy & Astrophysics

Explicit solution for a Gaussian wave packet im**ing on a square barrier

Authors: A. L. Perez Prieto, S. Brouard, J. G. Muga

Abstract: The collision of a quantum Gaussian wave packet with a square barrier is solved explicitly in terms of known functions. The obtained formula is suitable for performing fast calculations or asymptotic analysis. It also provides physical insight since the description of different regimes and collision phenomena typically requires only some of the terms. The collision of a quantum Gaussian wave packet with a square barrier is solved explicitly in terms of known functions. The obtained formula is suitable for performing fast calculations or asymptotic analysis. It also provides physical insight since the description of different regimes and collision phenomena typically requires only some of the terms. △ Less

Submitted 22 January, 2003; originally announced January 2003.

Comments: To be published in J. Phys. A

Ferromagnetic/superconducting proximity effect in La0.7Ca0.3MnO3 / YBa2Cu3O7 superlattices

Authors: Z. Sefrioui, D Arias, V. Pena, J. E. Villegas, M. Varela, P. Prieto, C. Leon, J. L. Martinez, J. Santamaria

Abstract: We study the interplay between magnetism and superconductivity in high quality YBa2Cu3O7 (YBCO) / La0.7Ca0.3MnO3(LCMO)superlattices. We find evidence for the YBCO superconductivity depression in presence of the LCMO layers. We show that due to its short coherence length superconductivity survives in the YBCO down to much smaller thickness in presence of the magnetic layer than in low Tc supercon… ▽ More We study the interplay between magnetism and superconductivity in high quality YBa2Cu3O7 (YBCO) / La0.7Ca0.3MnO3(LCMO)superlattices. We find evidence for the YBCO superconductivity depression in presence of the LCMO layers. We show that due to its short coherence length superconductivity survives in the YBCO down to much smaller thickness in presence of the magnetic layer than in low Tc superconductors. We also find that for a fixed thickness of the superconducting layer, superconductivity is depressed over a thickness interval of the magnetic layer in the 100 nm range. This is a much longer length scale than that predicted by the theory of ferromagnetic/superconducting proximity effect. △ Less

Submitted 14 January, 2003; originally announced January 2003.

Comments: 10 pages + 5 figures, submitted to Phys. Rev. B

Journal ref: Phys. Rev. B 67, 214511 (2003)

Superconductivity depression in ultrathin YBa2Cu3O7-x layers in La0.7Ca0.3MnO3 /YBa2Cu3O7-x superlattices

Authors: Z. Sefrioui, M. Varela, V. Pena, D Arias, J. E. Villegas, W. Saldarriaga, P. Prieto, C. Leon, J. L. Martinez, J. Santamaria

Abstract: We report on the depression of the superconducting critical temperature of ultra thin YBa2Cu3O7 (YBCO) layers, when their thickness is reduced in presence of La0.7Ca0.3MnO3 (LCMO) magnetic layers in [LCMO (15 u.c.)/ YBCO(N u.c.)] superlattices. The thickness of the manganite layer is kept at 15 unit cells and the YBCO thickness is varied between N=12 and N=1 unit cells. The structural analysis u… ▽ More We report on the depression of the superconducting critical temperature of ultra thin YBa2Cu3O7 (YBCO) layers, when their thickness is reduced in presence of La0.7Ca0.3MnO3 (LCMO) magnetic layers in [LCMO (15 u.c.)/ YBCO(N u.c.)] superlattices. The thickness of the manganite layer is kept at 15 unit cells and the YBCO thickness is varied between N=12 and N=1 unit cells. The structural analysis using x-ray diffraction and electron microscopy shows sharp interfaces with little structural disorder. While a critical temperature, Tc=85 K is found for 12 YBCO unit cells, superconductivity is completely suppressed for YBCO layer thickness below 3 unit cells. The possible interaction between superconductivity and magnetism is investigated. △ Less

Submitted 5 July, 2002; originally announced July 2002.

Comments: 7 pages + 5 figures

Journal ref: Appl. Phys. Lett. 81, 4568 (2002).

Transient interference of transmission and incidence

Authors: A. L. Perez Prieto, S. Brouard, J. G. Muga

Abstract: Due to a transient quantum interference during a wavepacket collision with a potential barrier, a particular momentum, that depends on the potential parameters but is close to the initial average momentum, becomes suppressed. The hole left pushes the momentum distribution outwards leading to a significant constructive enhancement of lower and higher momenta. This is explained in the momentum com… ▽ More Due to a transient quantum interference during a wavepacket collision with a potential barrier, a particular momentum, that depends on the potential parameters but is close to the initial average momentum, becomes suppressed. The hole left pushes the momentum distribution outwards leading to a significant constructive enhancement of lower and higher momenta. This is explained in the momentum complex-plane language in terms of a saddle point and two contiguous ``structural'' poles, which are not associated with resonances but with incident and transmitted components of the wavefunction. △ Less

Submitted 15 May, 2000; originally announced May 2000.

Comments: 4 pages of text, 6 postscript figures, revtex

Report number: QFUPV150500