Showing 1–50 of 55 results for author: Prieto, E

Euclid. III. The NISP Instrument

Authors: Euclid Collaboration, K. Jahnke, W. Gillard, M. Schirmer, A. Ealet, T. Maciaszek, E. Prieto, R. Barbier, C. Bonoli, L. Corcione, S. Dusini, F. Grupp, F. Hormuth, S. Ligori, L. Martin, G. Morgante, C. Padilla, R. Toledo-Moreo, M. Trifoglio, L. Valenziano, R. Bender, F. J. Castander, B. Garilli, P. B. Lilje, H. -W. Rix , et al. (412 additional authors not shown)

Abstract: The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the proc… ▽ More The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue 'Euclid on Sky', which contains Euclid key reference papers and first results from the Euclid Early Release Observations

Euclid. I. Overview of the Euclid mission

Authors: Euclid Collaboration, Y. Mellier, Abdurro'uf, J. A. Acevedo Barroso, A. Achúcarro, J. Adamek, R. Adam, G. E. Addison, N. Aghanim, M. Aguena, V. Ajani, Y. Akrami, A. Al-Bahlawan, A. Alavi, I. S. Albuquerque, G. Alestas, G. Alguero, A. Allaoui, S. W. Allen, V. Allevato, A. V. Alonso-Tetilla, B. Altieri, A. Alvarez-Candal, A. Amara, L. Amendola , et al. (1086 additional authors not shown)

Abstract: The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14… ▽ More The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue`Euclid on Sky'

IMBH Progenitors from Stellar Collisions in Dense Star Clusters

Authors: Elena González Prieto, Newlin C. Weatherford, Giacomo Fragione, Kyle Kremer, Frederic A. Rasio

Abstract: Very massive stars (VMSs) formed via a sequence of stellar collisions in dense star clusters have been proposed as the progenitors of massive black hole seeds. VMSs could indeed collapse to form intermediate-mass black holes (IMBHs), which would then grow by accretion to become the supermassive black holes observed at the centers of galaxies and powering high-redshift quasars. Previous studies hav… ▽ More Very massive stars (VMSs) formed via a sequence of stellar collisions in dense star clusters have been proposed as the progenitors of massive black hole seeds. VMSs could indeed collapse to form intermediate-mass black holes (IMBHs), which would then grow by accretion to become the supermassive black holes observed at the centers of galaxies and powering high-redshift quasars. Previous studies have investigated how different cluster initial conditions affect the formation of a VMS, including mass segregation, stellar collisions, and binaries, among others. In this study, we investigate the growth of VMSs with a new grid of Cluster Monte Carlo (CMC) star cluster simulations -- the most expansive to date. The simulations span a wide range of initial conditions, varying the number of stars, cluster density, stellar initial mass function (IMF), and primordial binary fraction. We find a gradual shift in the mass of the most massive collision product across the parameter space; in particular, denser clusters born with top-heavy IMFs provide strong collisional regimes that form VMSs with masses easily exceeding 1000 solar masses. Our results are used to derive a fitting formula that can predict the typical mass of a VMS formed as a function of the star cluster properties. Additionally, we study the stochasticity of this process and derive a statistical distribution for the mass of the VMS formed in one of our models, recomputing the model 50 times with different initial random seeds. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Comments: Accepted for ApJ. Comments welcome. 19 pages, 10 figures

Euclid's Near-Infrared Spectrometer and Photometer ready for flight -- review of final performance

Authors: E. Medinaceli, L. Valenziano, N. Auricchio, E. Franceschi, F. Gianotti, P. Battaglia, R. Farinelli, A. Balestra, S. Dusini, C. Sirignano, E. Borsato, L. Stanco, A. Renzi, A. Troja, L. Gabarra, S. Ligori, V. Capobianco, L. Corcione, D. Bonino, G. Sirri, L. Patrizii, M. Tenti, D. Di Ferdinando, C. Valieri, N. Mauri , et al. (22 additional authors not shown)

Abstract: ESA's mission Euclid, while undertaking its final integration stage, is fully qualified. Euclid will perform an extragalactic survey ($0<z<2$) by observing in the visible and near-infrared wavelength range. To detect infrared radiation, it is equipped with the Near Infrared Spectrometer and Photometer (NISP) instrument, operating in the 0.9--2 $μ$m range. In this paper, after introducing the surve… ▽ More ESA's mission Euclid, while undertaking its final integration stage, is fully qualified. Euclid will perform an extragalactic survey ($0<z<2$) by observing in the visible and near-infrared wavelength range. To detect infrared radiation, it is equipped with the Near Infrared Spectrometer and Photometer (NISP) instrument, operating in the 0.9--2 $μ$m range. In this paper, after introducing the survey strategy, we focus our attention on the NISP Data Processing Unit's Application Software, highlighting the experimental process to obtain the final parametrization of the on-board processing of data produced by the array of 16 Teledyne HAWAII-2RG (HgCdTe) detectors. We report results from the latest ground test campaigns with the flight configuration hardware - complete optical system (Korsh anastigmat telescope), detectors array (0.56 deg$^2$ field of view), and readout systems (16 Digital Control Units and Sidecar ASICs). The performance of the on-board processing is then presented. We also describe a major issue found during the final test phase. We show how the problem was identified and solved thanks to an intensive coordinated effort of an independent review `Tiger' team, lead by ESA, and a team of NISP experts from the Euclid Consortium. An extended PLM level campaign at ambient temperature in Liège and a dedicated test campaign conducted in Marseille on the NISP EQM model eventually confirmed the resolution of the problem. Finally, we report examples of the outstanding spectrometric (using a Blue and two Red Grisms) and photometric performance of the NISP instrument, as derived from the end-to-end payload module test campaign at FOCAL 5 -- CSL; these results include the photometric Point Spread Function (PSF) determination and the spectroscopic dispersion verification. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 12 pages, 14 figures

Journal ref: Proc. SPIE 12180, Space Telescopes and Instrumentation 2022: Optical, Infrared, and Millimeter Wave, 121801L (27 August 2022)

Quantifying Li-content for compositional tailoring of lithium ferrite ceramics

Authors: C. Granados-Miralles, A. Serrano, P. Prieto, J. Guzmán-Mínguez, J. E. Prieto, A. M. Friedel, E. García-Martín, J. F. Fernández, A. Quesada

Abstract: Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in tur… ▽ More Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in turn, the performance of functional devices based on these materials. Despite this, lithium content is rarely accurately quantified, as a result of the low number of electrons in Li hindering its identification by means of routine materials characterization methods. In the present work, magnetic lithium ferrite powders with Li:Fe ratios of 1:1, 1:3 and 1:5 have been synthesized, successfully obtaining phase-pure materials (LiFeO2 and LiFe5O8), as well as a controlled mixture of both phases. The powders have been compacted and subsequently sintered by thermal treatment (Tmax = 1100 °C) to fabricate dense pellets which preserve the original Li:Fe ratios. Li-content on both powders and pellets has been determined by two independent methods: (i) Rutherford backscattering spectroscopy combined with nuclear reaction analysis and (ii) Rietveld analysis of powder X-ray diffraction data. With good agreement between both techniques, it has been confirmed that the Li:Fe ratios employed in the synthesis are maintained in the sintered ceramics. The same conclusion is drawn from spatially-resolved confocal Raman microscopy experiments on regions of a few microns. Field emission scanning electron microscopy has evidenced the substantial grain growth taking place during the sintering process - mean particle sizes rise from about 600 nm in the powders up to 3.8(6) um for dense LiFeO2 and 10(2) um for LiFe5O8 ceramics. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: J. Eur. Ceram. Soc. 43 (2023) 3351-3359

A Platform for Addressing Individual Magnetite Islands Grown Epitaxially on Ru(0001) and Manipulating Their Magnetic Domains

Authors: Sandra Ruiz-Gómez, Eva María Trapero, Claudia Fernández-González, Adolfo del Campo, Cecilia Granados-Miralles, José Emilio Prieto, Muhammad Waqas Khaliq, Miguel Angel Niño, Michael Foerster, Lucía Aballe, Juan de la Figuera

Abstract: We have grown high-quality magnetite micrometric islands on ruthenium stripes on sapphire through a combination of magnetron sputtering (Ru film), high-temperature molecular beam epitaxy (oxide islands), and optical lithography. The samples have been characterized by atomic force microscopy, Raman spectroscopy, X-ray absorption and magnetic circular dichroism in a photoemission microscope. The mag… ▽ More We have grown high-quality magnetite micrometric islands on ruthenium stripes on sapphire through a combination of magnetron sputtering (Ru film), high-temperature molecular beam epitaxy (oxide islands), and optical lithography. The samples have been characterized by atomic force microscopy, Raman spectroscopy, X-ray absorption and magnetic circular dichroism in a photoemission microscope. The magnetic domains on the magnetite islands can be modified by the application of current pulses through the Ru stripes in combination with magnetic fields. The modification of the magnetic domains is explained by the Oersted field generated by the electrical current flowing through the stripes underneath the magnetite nanostructures. The fabrication method is applicable to a wide variety of rock salt and spinel oxides. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: Cryst. Growth Des. 23 (2023) 5785-5791

Tuning the Néel temperature in an antiferromagnet: the case of NixCo1-xO microstructures

Authors: Anna Mandziak, Guiomar D. Soria, José Emilio Prieto, Pilar Prieto, Cecilia Granados-Miralles, Adrian Quesada, Michael Foerster, Lucia Aballe, Juan de la Figuera

Abstract: We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape… ▽ More We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: Sci. Rep. 9 (2019) 13584

Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary

Authors: T. Maciaszek, A. Ealet, W. Gillard, K. Jahnke, R. Barbier, E. Prieto, W. Bon, A. Bonnefoi, A. Caillat, M. Carle, A. Costille, F. Ducret, C. Fabron, B. Foulon, J. L. Gimenez, E. Grassi, M. Jaquet, D. Le Mignant, L. Martin, T. Pamplona, P. Sanchez, J. C. Clémens, L. Caillat, M. Niclas, A. Secroun , et al. (73 additional authors not shown)

Abstract: The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal… ▽ More The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data. This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Comments: 18 pages, to appear in Proceedings of the SPIE

Journal ref: Proceedings of the SPIE, Volume 12180, id. 121801K 18 pp. (2022)

Intermediate-mass Black Holes on the Run from Young Star Clusters

Authors: Elena González Prieto, Kyle Kremer, Giacomo Fragione, Miguel A. S. Martinez, Newlin C. Weatherford, Michael Zevin, Frederic A. Rasio

Abstract: The existence of black holes (BHs) with masses in the range between stellar remnants and supermassive BHs has only recently become unambiguously established. GW190521, a gravitational wave signal detected by the LIGO/Virgo Collaboration, provides the first direct evidence for the existence of such intermediate-mass BHs (IMBHs). This event sparked and continues to fuel discussion on the possible fo… ▽ More The existence of black holes (BHs) with masses in the range between stellar remnants and supermassive BHs has only recently become unambiguously established. GW190521, a gravitational wave signal detected by the LIGO/Virgo Collaboration, provides the first direct evidence for the existence of such intermediate-mass BHs (IMBHs). This event sparked and continues to fuel discussion on the possible formation channels for such massive BHs. As the detection revealed, IMBHs can form via binary mergers of BHs in the "upper mass gap" ($\approx40 -120\,M_{\odot}$). Alternatively, IMBHs may form via the collapse of a very massive star formed through stellar collisions and mergers in dense star clusters. In this study, we explore the formation of IMBHs with masses between $120$ and $500\,M_{\odot}$ in young, massive star clusters using state-of-the-art Cluster Monte Carlo ($\texttt{CMC}$) models. We examine the evolution of IMBHs throughout their dynamical lifetimes, ending with their ejection from the parent cluster due to gravitational radiation recoil from BH mergers, or dynamical recoil kicks from few-body scattering encounters. We find that $ \textit{all}$ of the IMBHs in our models are ejected from the host cluster within the first $\sim 500$ Myr, indicating a low retention probability of IMBHs in this mass range for globular clusters today. We estimate the peak IMBH merger rate to be $\mathcal{R} \approx 2 \, \rm{Gpc}^{-3}\,\rm{yr}^{-1}$ at redshift $z \approx 2$. △ Less

Submitted 17 October, 2022; v1 submitted 16 August, 2022; originally announced August 2022.

Comments: Accepted for ApJ. Comments welcome. 16 pages and 10 figures

Effect of annealing in the formation of well crystallized and textured SrFe$_{12}$O$_{19}$ films grown by RF magnetron sputtering

Authors: G. D. Soria, A. Serrano, J. E. Prieto, A. Quesada, G. Gorni, J. de la Figuera, J. F. Marco

Abstract: We have studied the influence of annealing treatment on the crystalline growth of SrFe_12_O_19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without \textit{ex-situ} heating step, have been analysed and compared to determine the differences in their structural, compositional and magnetic properties. The results… ▽ More We have studied the influence of annealing treatment on the crystalline growth of SrFe_12_O_19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without \textit{ex-situ} heating step, have been analysed and compared to determine the differences in their structural, compositional and magnetic properties. The results obtained by the different analysis techniques, in particular Mössbauer spectroscopy together with EXAFS and XANES data, suggest that the as-grown film is composed of nanocrystalline maghemite nanoparticles and amorphous strontium oxide. A strontium hexaferrite canonical structure with c-axis orientation in the sample plane was found for the annealed film. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Comments: 13 pages (two columns), 7 figures. Submitted to Journal of Materials Research

Journal ref: Journal of Materials Research (2022)

Size effects in the Verwey transition of nanometer-thick micron-wide magnetite crystals

Authors: Adolfo del Campo, Sandra Ruiz-Gómez, Eva M. Trapero, Cecilia Granados-Miralles, Adrián Quesada, Michael Foerster, Lucía Aballe, José Emilio Prieto, Juan de la Figuera

Abstract: We have monitored the Verwey transition in micrometer-wide, nanometer-thick magnetite islands on epitaxial Ru films on Al2O3(0001) using Raman spectroscopy. The islands have been grown by high-temperature oxygen-assisted molecular beam epitaxy. Below 100 K and for thicknesses above 20 nm the Raman spectra correspond to those observed in bulk crystals and high quality thin films for the sub-Verwey… ▽ More We have monitored the Verwey transition in micrometer-wide, nanometer-thick magnetite islands on epitaxial Ru films on Al2O3(0001) using Raman spectroscopy. The islands have been grown by high-temperature oxygen-assisted molecular beam epitaxy. Below 100 K and for thicknesses above 20 nm the Raman spectra correspond to those observed in bulk crystals and high quality thin films for the sub-Verwey magnetite structure. At room temperature the width of the cubic phase modes is similar to the best reported in bulk crystals, indicating a similar level of electron-phonon interaction. The evolution of the Raman spectra upon cooling suggests that for islands thicker than 20 nm, structural changes appear first at temperatures starting at 150 K and the Verwey transition itself takes place at around 115 K. However, islands thinner than 20 nm show a very different Raman spectra indicating that while a transition takes place, the charge order of the ultrathin islands differs markedly from their thicker counterparts △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: 8 pages, 5 figures, 2 tables

Journal ref: J. Phys. Chem. C 126, 13755 (2022)

Euclid preparation. XVIII. The NISP photometric system

Authors: Euclid Collaboration, M. Schirmer, K. Jahnke, G. Seidel, H. Aussel, C. Bodendorf, F. Grupp, F. Hormuth, S. Wachter, P. N. Appleton, R. Barbier, J. Brinchmann, J. M. Carrasco, F. J. Castander, J. Coupon, F. De Paolis, A. Franco, K. Ganga, P. Hudelot, E. Jullo, A. Lancon, A. A. Nucita, S. Paltani, G. Smadja, L. M. G. Venancio , et al. (198 additional authors not shown)

Abstract: Euclid will be the first space mission to survey most of the extragalactic sky in the 0.95-2.02 $μ$m range, to a 5$σ$ point-source median depth of 24.4 AB mag. This unique photometric data set will find wide use beyond Euclid's core science. In this paper, we present accurate computations of the Euclid Y_E, J_E and H_E passbands used by the Near-Infrared Spectrometer and Photometer (NISP), and the… ▽ More Euclid will be the first space mission to survey most of the extragalactic sky in the 0.95-2.02 $μ$m range, to a 5$σ$ point-source median depth of 24.4 AB mag. This unique photometric data set will find wide use beyond Euclid's core science. In this paper, we present accurate computations of the Euclid Y_E, J_E and H_E passbands used by the Near-Infrared Spectrometer and Photometer (NISP), and the associated photometric system. We pay particular attention to passband variations in the field of view, accounting among others for spatially variable filter transmission, and variations of the angle of incidence on the filter substrate using optical ray tracing. The response curves' cut-on and cut-off wavelengths - and their variation in the field of view - are determined with 0.8 nm accuracy, essential for the photometric redshift accuracy required by Euclid. After computing the photometric zeropoints in the AB mag system, we present linear transformations from and to common ground-based near-infrared photometric systems, for normal stars, red and brown dwarfs, and galaxies separately. A Python tool to compute accurate magnitudes for arbitrary passbands and spectral energy distributions is provided. We discuss various factors from space weathering to material outgassing that may slowly alter Euclid's spectral response. At the absolute flux scale, the Euclid in-flight calibration program connects the NISP photometric system to Hubble Space Telescope spectrophotometric white dwarf standards; at the relative flux scale, the chromatic evolution of the response is tracked at the milli-mag level. In this way, we establish an accurate photometric system that is fully controlled throughout Euclid's lifetime. △ Less

Submitted 31 March, 2022; v1 submitted 3 March, 2022; originally announced March 2022.

Comments: 33 pages, 25 figures, accepted for publication in A&A

Journal ref: A&A 662, A92 (2022)

Growth and characterization of ultrathin cobalt ferrite films on Pt(111)

Authors: G. D. Soria, K. Freindl, J. E. Prieto, A. Quesada, J. de la Figuera, N. Spiridis, J. Korecki, J. F. Marco

Abstract: CoFe2O4 thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523~K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy, Low-Energy Electron Diffraction, Scanning Tunneling Microscopy and Conversion Electron Mössbauer Spectroscopy. The as-grown films were composed of small, nanometr… ▽ More CoFe2O4 thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523~K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy, Low-Energy Electron Diffraction, Scanning Tunneling Microscopy and Conversion Electron Mössbauer Spectroscopy. The as-grown films were composed of small, nanometric grains. Annealing of the films produced an increase in the grain size and gave rise to magnetic order at room temperature, although with a fraction of the films remaining in the paramagnetic state. Annealing also induced cobalt segregation to the surface of the thicker films. The measured Mössbauer spectra at low temperature were indicative of cobalt ferrite, the both films showing very similar hyperfine patterns. Annealing in oxygen or vacuum affected the cationic distribution, which was closer to that expected for an inverse spinel in the case of annealing in an oxygen atmosphere. △ Less

Submitted 18 January, 2022; originally announced January 2022.

Comments: 9 pages (two columns), 8 figures, 2 tables. Submitted to Applied Surface Science

Journal ref: Applied Surface Science 586 (2022) 152672

Magnetic domain wall pinning in cobalt ferrite microstructures

Authors: Sandra Ruiz-Gómez, Anna Mandziak, Laura Martín-García, Jose Emilio Prieto, Pilar Prieto, Carmen Munuera, Michael Foerster, Adrián Quesda, Lucía Aballe, Juan de la Figuera

Abstract: A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared… ▽ More A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands. △ Less

Submitted 12 January, 2022; originally announced January 2022.

Comments: 9 pages, 3 figures

Journal ref: Applied Surface Science 600, 154045 (2022)

Dynamics of Li deposition on epitaxial graphene/Ru(0001) islands

Authors: J. E. Prieto, M. A. González-Barrio, E. García-Martín, G. D. Soria, L. Morales de la Garza, J. de la Figuera

Abstract: Li metal has been deposited on the surface of a Ru(0001) single crystal containing patches of monolayer-thick epitaxial graphene islands. The use of low-energy electron microscopy and diffraction allowed us to {\em in situ} monitor the process by measuring the local work function as well as to study the system in real and reciprocal space, comparing the changes taking place on the graphene with th… ▽ More Li metal has been deposited on the surface of a Ru(0001) single crystal containing patches of monolayer-thick epitaxial graphene islands. The use of low-energy electron microscopy and diffraction allowed us to {\em in situ} monitor the process by measuring the local work function as well as to study the system in real and reciprocal space, comparing the changes taking place on the graphene with those on the bare Ru(0001) surface. It is found that Li deposition decreases the work function of the graphene islands but to a much smaller degree than of the Ru(0001) surface, as corresponds to its intercalation below the graphene overlayer. Finally, the diffusion process of Li out of the graphene islands has been monitored by photoelectron microscopy using a visible-light laser. △ Less

Submitted 23 December, 2021; originally announced December 2021.

Comments: 6 pages, 5 figures. Submitted to Applied Surface Science

Journal ref: Applied Surface Science 593, 153274 (2022)

RBS/Channeling characterization of Ru(0001) and thin epitaxial Ru/Al$_2$O$_3$(0001) films

Authors: J. E. Prieto, E. M. Trapero, P. Prieto, E. García-Martín, G. D. Soria, P. Galán, J. de la Figuera

Abstract: Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry… ▽ More Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry of He ions both in random and in channeling conditions. We include results of a Ru(0001) single crystal for comparison. Analysis of channeling shows that films thicker than 35 nm grow with (0001) orientation, a well-defined epitaxial relation with the substrate and a high degree of crystal quality, comparable to the Ru(0001) single crystal. Thinner films of down to 7 nm in thickness, for which relaxation of epitaxial strain is not complete, produce a similar degree of dechanneling. The surface of the films can be prepared in a clean and ordered state in order to allow further epitaxial growth on top. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: 8 pages (two columns), 5 figures, submitted to Applied Surface Science

Journal ref: Applied Surface Science 582, 152304 (2022)

Effect of heteroepitaxial growth on LT-GaAs: ultrafast optical properties

Authors: Jessica Afalla, Elizabeth Ann Prieto, Horace Andrew Husay, Karl Cedric Gonzales, Gerald Catindig, Aizitiaili Abulikemu, Armando Somintac, Arnel Salvador, Elmer Estacio, Masahiko Tani, Muneaki Hase

Abstract: Epitaxial low temperature grown GaAs (LT-GaAs) on silicon (LT-GaAs/Si) has the potential for terahertz (THz) photoconductive antenna applications. However, crystalline, optical and electrical properties of heteroepitaxial grown LT-GaAs/Si can be very different from those grown on semi-insulating GaAs substrates (reference). In this study, we investigate optical properties of an epitaxial grown LT-… ▽ More Epitaxial low temperature grown GaAs (LT-GaAs) on silicon (LT-GaAs/Si) has the potential for terahertz (THz) photoconductive antenna applications. However, crystalline, optical and electrical properties of heteroepitaxial grown LT-GaAs/Si can be very different from those grown on semi-insulating GaAs substrates (reference). In this study, we investigate optical properties of an epitaxial grown LT-GaAs/Si sample, compared to a reference grown under the same substrate temperature, and with the same layer thickness. Anti-phase domains and some crystal misorientation are present in the LT-GaAs/Si. From coherent phonon spectroscopy, the intrinsic carrier densities are estimated to be ~$10^{15}$ cm$^{-3}$ for either sample. Strong plasmon dam** is also observed. Carrier dynamics, measured by time-resolved THz spectroscopy at high excitation fluence, reveals markedly different responses between samples. Below saturation, both samples exhibit the desired fast response. Under optical fluences $\geq$ 54 $μ$ J/cm$^2$, the reference LT-GaAs layer shows saturation of electron trap** states leading to non-exponential behavior, but the LT-GaAs/Si maintains a double exponential decay. The difference is attributed to the formation of As-As and Ga-Ga bonds during the heteroepitaxial growth of LT-GaAs/Si, effectively leading to a much lower density of As-related electron traps. △ Less

Submitted 19 July, 2021; originally announced July 2021.

Comments: 8 pages, supplementary info separate

Journal ref: J. Phys. Cond. Matt. 33, 315704, 2021

Influence of the growth conditions on the magnetism of SrFe$_{12}$O$_{19}$ thin films and the behavior of Co / SrFe$_{12}$O$_{19}$ bilayers

Authors: G. D. Soria, J. F. Marco, A. Mandziak, S. Sánchez-Cortés, M. Sánchez-Arenillas, J. E. Prieto, J. Dávalos, M. Foerster, L. Aballe, J. López-Sánchez, J. C. Guzmán-Mínguez, C. Granados-Miralles, J. de la Figuera, A. Quesada

Abstract: SrFe$_{12}$O$_{19}$ (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputteri… ▽ More SrFe$_{12}$O$_{19}$ (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputtering power and the thickness of the films. Additionally, the coupling between the SFO films and a deposited cobalt overlayer was studied by means of synchrotron-based spectromicroscopy techniques. A structural coupling at the SFO/Co interface is suggested to account for the expetimental observations. Micromagnetic simulations were performed in order to reproduce the experimental behaviour of the system. △ Less

Submitted 8 May, 2020; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: 17 pages, 11 figures. Submitted to Journal of Physics D: Applied Physics. Second version, improved after first round of reviews

Journal ref: J. Phys. D: Appl. Phys. 53, 344002 (2020)

3D metrology with a laser tracker inside a vacuum chamber for NISP test campaign

Authors: Anne Costille, Florent Beaumont, Eric Prieto, Michael Carle, Romain Pawlowski, Thierry Roux, Olivier Dupuy, Christophe Fabron

Abstract: In the frame of the test of NISP instrument for ESA Euclid mission, the question was raised to perform a metrology measurement of different components during the thermal vacuum test of NISP instrument. NISP will be tested at Laboratoire d'Astrophysique de Marseille (LAM) in ERIOS chamber under vacuum and thermal conditions in order to qualify the instrument in its operating environment and to perf… ▽ More In the frame of the test of NISP instrument for ESA Euclid mission, the question was raised to perform a metrology measurement of different components during the thermal vacuum test of NISP instrument. NISP will be tested at Laboratoire d'Astrophysique de Marseille (LAM) in ERIOS chamber under vacuum and thermal conditions in order to qualify the instrument in its operating environment and to perform the final acceptance test before delivery to the payload. One of the main objectives of the test campaign will be the measurement of the focus position of NISP image plane with respect to the EUCLID object plane. To simulate the EUCLID object plane, a telescope simulator with a very well know focal distance will be installed in front of NISP into ERIOS chamber. We need to measure at cold and vacuum the position of reflectors installed on NISP instrument and the telescope simulator. From these measurements, we will provide at operational temperature the measurement of references frames set on the telescope simulator and NISP, the knowledge of the coordinates of the object point source provided by the telescope simulator and the measurement of the angle between the telescope simulator optical axis and NISP optical axis. In this context, we have developed a metrology method based on the use of a laser tracker to measure the position of the reflectors inside ERIOS. The laser tracker is installed outside the vacuum chamber and measure through a curved window reflectors put inside the chamber either at ambient pressure or vacuum pressure. Several tests campaigns have been done at LAM to demonstrate the measurement performance with this configuration. Using a well know reflectors configuration, we show that it is possible to correct the laser tracker measurement from the window disturbances and from the vacuum impact. A corrective term is applied to the data and allows retrieving the real coordinates of the reflectors with a bias lower than 30$μ$m, which is lower than the laser tracker measurement uncertainties estimated at 60$μ$m. No additional error term of the laser tracker measurement is observed when using the laser tracker with the curved window and in vacuum, comparing with a classical use of the laser tracker. With these test campaign, we have been able to demonstrate the possibility to use a laser tracker to measure in real time during a vacuum thermal test the position of different mechanical parts into a vacuum chamber with an accuracy better than 60$μ$m. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Journal ref: SPIE Astronomical Telescopes and Instrumentation, Jun 2018, Austin, United States. 2018

Cross sections of X-ray production induced on Ti, Fe, Zn, Nb and Ta by O, Cl, Cu and Br ions with energies between 4 MeV and 40 MeV

Authors: J. E. Prieto, P. Galan, A. Zucchiatti

Abstract: Differential cross section of X-ray production induced by O, Cl, Cu and Br ions with energies between 4 MeV and 40 MeV have been measured for thin targets of Ti, Fe, Zn, Nb and Ta in a direct way. A fully characterized silicon drift diode was used as X-rays detector. Beam currents have been measured by a system of two Faraday cups. Corrections for target thickness effects have been applied to the… ▽ More Differential cross section of X-ray production induced by O, Cl, Cu and Br ions with energies between 4 MeV and 40 MeV have been measured for thin targets of Ti, Fe, Zn, Nb and Ta in a direct way. A fully characterized silicon drift diode was used as X-rays detector. Beam currents have been measured by a system of two Faraday cups. Corrections for target thickness effects have been applied to the raw data. Experimental cross sections are compared both with theory and with previously published results. Experimental results from other authors are in reasonable agreement with ours over a wide energy range. Theory produces consistent results in the case of oxygen ions but gives cross sections even orders of magnitude below the experimental ones for heavier ions (ECPSSR-UA) or contrasting results (PWBA) depending on the ion-target combination. △ Less

Submitted 16 August, 2017; originally announced August 2017.

Comments: 13 pages, 2 Tables, 4 Figures. Submitted to NIM B

Journal ref: Nucl. Instrum. Methods B 410, 102 (2017)

Stranski-Krastanov mechanism of growth and the effect of misfit sign on quantum dots nucleation

Authors: J. E. Prieto, I. Markov

Abstract: The thermodynamics of the Stranski-Krastanov mode of epitaxial growth and the effect of the sign of the lattice misfit are discussed. The Stranski-Krastanov mode of growth represents a sequence of layer-by-layer or Frank-van der Merwe growth followed by the formation of three-dimensional (3D) islands or Volmer-Weber growth. The occurrence of both growth modes mentioned above is in compliance with… ▽ More The thermodynamics of the Stranski-Krastanov mode of epitaxial growth and the effect of the sign of the lattice misfit are discussed. The Stranski-Krastanov mode of growth represents a sequence of layer-by-layer or Frank-van der Merwe growth followed by the formation of three-dimensional (3D) islands or Volmer-Weber growth. The occurrence of both growth modes mentioned above is in compliance with the wettability criterion of Bauer. The positive wetting function required for the occurrence of the Volmer-Weber growth is originated by the vertical displacements of the atoms close to the edges of the two-dimensional (2D) islands as a result of the relaxation of the lattice misfit. The monolayer high islands become unstable against bilayer islands, bilayer islands in turn become unstable against trilayer islands, etc. beyond some critical islands sizes. Monolayer islands appear as necessary precursors of three-dimensional (3D) islands. The critical island size for mono-bilayer transformation increases steeply with decreasing lattice misfit and diverges at a critical value of the misfit. This value divides the regions of Frank-van der Merwe and Stranski-Krastanov modes in a phase diagram of coordinates wetting-misfit. The transformation of monolayer to multilayer islands takes place either by consecutive nucleation and growth of 2D islands (layer-by-layer transformation), or by nucleation and lateral (2D) growth of multilayer islands (multilayer 2D transformation). The former occurs in the case of "stiff" overlayer materials and mostly in compressed overlayers. The latter takes place in the case of "soft" materials like Pb and In, mostly in tensile overlayers. Tensile films show non-nucleation transformation compared with the nucleation-like behavior of compressed films. △ Less

Submitted 1 June, 2017; originally announced June 2017.

Comments: 18 pages, 19 figures, review article submitted to Surface Science

Journal ref: Surf. Sci. 664, 172 (2017)

A procedure to correct for target thickness effects in heavy-ion PIXE at MeV energies

Authors: A. Zucchiatti, P. Galan, J. E. Prieto

Abstract: We describe a novel procedure for the calculation of correction factors for taking into account the effect of target thickness to be applied to the determination of cross sections of X-ray emission induced by heavy ions at MeV energies. We discuss the origin of the correction and describe the calculations, based on simple polynomial fits of both the theoretical cross sections and the ion energy lo… ▽ More We describe a novel procedure for the calculation of correction factors for taking into account the effect of target thickness to be applied to the determination of cross sections of X-ray emission induced by heavy ions at MeV energies. We discuss the origin of the correction and describe the calculations, based on simple polynomial fits of both the theoretical cross sections and the ion energy losses. The procedure can be easily implemented. We show several examples for a set of targets specifically produced for cross section measurements and for various combinations of ion type and energy. △ Less

Submitted 17 May, 2017; originally announced May 2017.

Comments: 11 pages, 2 Tables, 4 Figures. Submitted to NIM B

Journal ref: Nucl. Instrum. Methods B 407, 1 (2017)

Cross sections of X-ray production induced by C and Si ions with energies up to 1 MeV/u on Ti, Fe, Zn, Nb, Ru and Ta

Authors: J. E. Prieto, A. Zucchiatti, P. Galán, P. Prieto

Abstract: X-ray production differential cross sections induced by C and Si ions with energies from 1 MeV/u down to 0.25 MeV/u, produced by the CMAM 5 MV tandem accelerator, have been measured for thin targets of Ti, Fe, Zn, Nb, Ru and Ta in a direct way. X-rays have been detected by a fully characterized silicon drift diode and beam currents have been measured by a system of two Faraday cups. Measured cross… ▽ More X-ray production differential cross sections induced by C and Si ions with energies from 1 MeV/u down to 0.25 MeV/u, produced by the CMAM 5 MV tandem accelerator, have been measured for thin targets of Ti, Fe, Zn, Nb, Ru and Ta in a direct way. X-rays have been detected by a fully characterized silicon drift diode and beam currents have been measured by a system of two Faraday cups. Measured cross sections agree in general with previously published results. The ECPSSR theory with the united atoms correction gives absolute values close to the experimental ones for all the studied elements excited by C ions and for Ta, Nb and Ru excited by Si ions. For Ti, Fe and Zn excited by Si, the basic ECPSSR theory gives better agreement, although on absolute values the gap for Ti is still large. △ Less

Submitted 28 November, 2016; originally announced November 2016.

Comments: 11 pages, 2 tables, 7 figures. Contribution to the 12th. European Conference on Accelerators in Applied Research and Technology (ECAART 12) held in Jyväskylä, Finland, 3-8 July 2016

Journal ref: Nucl. Instrum. Methods B 406, 167 (2017)

Magnetism of epitaxial Tb films on W(110) studied by spin-polarized low-energy electron microscopy

Authors: J. E. Prieto, Gong Chen, A. K. Schmid, J. de la Figuera

Abstract: Thin epitaxial films of Tb metal were grown on a clean W(110) substrate in ultra-high vacuum and studied in-situ by low-energy electron microscopy. Annealed films present magnetic contrast in spin-polarized low-energy electron microscopy. The energy dependence of the electron reflectivity was determined and a maximum value of its spin asymmetry of about 1\% was measured. The magnetization directio… ▽ More Thin epitaxial films of Tb metal were grown on a clean W(110) substrate in ultra-high vacuum and studied in-situ by low-energy electron microscopy. Annealed films present magnetic contrast in spin-polarized low-energy electron microscopy. The energy dependence of the electron reflectivity was determined and a maximum value of its spin asymmetry of about 1\% was measured. The magnetization direction of the Tb films is in-plane. Upon raising the temperature, no change in the domain distribution is observed, while the asymmetry in the electron reflectivity decreases when approaching the critical temperature, following a power law $ \sim (1 - T/T_C)^β$ with a critical exponent $β$ of 0.39. △ Less

Submitted 30 November, 2016; v1 submitted 31 October, 2016; originally announced October 2016.

Comments: 6 pages, 8 figures. Accepted version, minor changes

Journal ref: Phys. Rev. B 94, 174445 (2016)

Step energies and equilibrium shape of strained monolayer islands

Authors: J. E. Prieto, I. Markov

Abstract: Using a simple atomistic model of anharmonic nearest-neighbors interaction, we have calculated the step energies of strained hexagonal monolayer islands. These have been found to decrease with the absolute value of the misfit due to the strain relaxation at steps. The effect is significantly more pronounced in the case of positive misfit owing to the stronger repulsive interatomic forces. Furtherm… ▽ More Using a simple atomistic model of anharmonic nearest-neighbors interaction, we have calculated the step energies of strained hexagonal monolayer islands. These have been found to decrease with the absolute value of the misfit due to the strain relaxation at steps. The effect is significantly more pronounced in the case of positive misfit owing to the stronger repulsive interatomic forces. Furthermore, (111)-faceted steps are favored at positive misfit (compressed islands) and, to a lesser extent, (100)-faceted steps at negative misfits (tensile islands). The result is rationalized in terms of the different bonding geometries at step edges and a comparison with experiments is included. Thus, the equilibrium shape transforms from regular hexagons at zero misfit to threefold symmetric hexagons with increasing misfit. △ Less

Submitted 25 November, 2014; v1 submitted 23 October, 2013; originally announced October 2013.

Comments: 6 pages, 5 figures, 1 table. Improved, finally accepted version including a new figure, a new table and several minor modifications resulting from discussions with referees

Journal ref: Europhys. Lett. 108, 46007 (2014)

Detectors and cryostat design for the SuMIRe Prime Focus Spectrograph (PFS)

Authors: James E. Gunn, Michael Carr, Stephen A. Smee, Joe D. Orndorff, Robert H. Barkhouser, Murdock Hart, Charles L. Bennett, Jenny E. Greene, Timothy Heckman, Hiroshi Karoji, Olivier LeFevre, Hung-Hsu Ling, Laurent Martin, Brice Menard, Hitoshi Murayama, Eric Prieto, David Spergel, Michael A. Strauss, Hajime Sugai, Akitoshi Ueda, Shiang-Yu Wang, Rosemary Wyse, Nadia Zakamska

Abstract: We describe the conceptual design of the camera cryostats, detectors, and detector readout electronics for the SuMIRe Prime Focus Spectrograph (PFS) being developed for the Subaru telescope. The SuMIRe PFS will consist of four identical spectrographs, each receiving 600 fibers from a 2400 fiber robotic positioner at the prime focus. Each spectrograph will have three channels covering wavelength ra… ▽ More We describe the conceptual design of the camera cryostats, detectors, and detector readout electronics for the SuMIRe Prime Focus Spectrograph (PFS) being developed for the Subaru telescope. The SuMIRe PFS will consist of four identical spectrographs, each receiving 600 fibers from a 2400 fiber robotic positioner at the prime focus. Each spectrograph will have three channels covering wavelength ranges 3800 Å - 6700 Å, 6500 Å - 10000 Å, and 9700 Å - 13000 Å, with the dispersed light being imaged in each channel by a f/1.10 vacuum Schmidt camera. In the blue and red channels a pair of Hamamatsu 2K x 4K edge-buttable CCDs with 15 um pixels are used to form a 4K x 4K array. For the IR channel, the new Teledyne 4K x 4K, 15 um pixel, mercury-cadmium-telluride sensor with substrate removed for short-wavelength response and a 1.7 um cutoff will be used. Identical detector geometry and a nearly identical optical design allow for a common cryostat design with the only notable difference being the need for a cold radiation shield in the IR camera to mitigate thermal background. This paper describes the details of the cryostat design and cooling scheme, relevant thermal considerations and analysis, and discusses the detectors and detector readout electronics. △ Less

Submitted 9 October, 2012; originally announced October 2012.

A spectrograph instrument concept for the Prime Focus Spectrograph (PFS) on Subaru Telescope

Authors: Sébastien Vives, David Le Mignant, Fabrice Madec, Marc Jaquet, Eric Prieto, Laurent Martin, Olivier Le Fèvre, James Gunn, Michael Carr, Stephen Smee, Robert Barkhouser, Hajime Sugai, Naoyuki Tamura

Abstract: We describe the conceptual design of the spectrograph opto-mechanical concept for the SuMIRe Prime Focus Spectrograph (PFS) being developed for the SUBARU telescope. The SuMIRe PFS will consist of four identical spectrographs, each receiving 600 fibers from a 2400 fiber robotic positioner at the prime focus. Each spectrograph will have three channels covering in total, a wavelength range from 380… ▽ More We describe the conceptual design of the spectrograph opto-mechanical concept for the SuMIRe Prime Focus Spectrograph (PFS) being developed for the SUBARU telescope. The SuMIRe PFS will consist of four identical spectrographs, each receiving 600 fibers from a 2400 fiber robotic positioner at the prime focus. Each spectrograph will have three channels covering in total, a wavelength range from 380 nm to 1300 nm. The requirements for the instrument are summarized in Section 1. We present the optical design and the optical performance and analysis in Section 2. Section 3 introduces the mechanical design, its requirements and the proposed concepts. Finally, the AIT phases for the Spectrograph System are described in Section 5. △ Less

Submitted 9 October, 2012; originally announced October 2012.

Comments: 8 pages, 5 figures, submitted to "Ground-based and Airborne Instrumentation for Astronomy IV, Ian S. McLean, Suzanne K. Ramsay, Hideki Takami, Editors, Proc. SPIE 8446 (2012)"

Prime Focus Spectrograph - Subaru's future -

Authors: Hajime Sugai, Hiroshi Karoji, Naruhisa Takato, Naoyuki Tamura, Atsushi Shimono, Youichi Ohyama, Akitoshi Ueda, Hung-Hsu Ling, Marcio Vital de Arruda, Robert H. Barkhouser, Charles L. Bennett, Steve Bickerton, David F. Braun, Robin J. Bruno, Michael A. Carr, João Batista de Carvalho Oliveira, Yin-Chang Chang, Hsin-Yo Chen, Richard G. Dekany, Tania Pereira Dominici, Richard S. Ellis, Charles D. Fisher, James E. Gunn, Timothy M. Heckman, Paul T. P. Ho , et al. (29 additional authors not shown)

Abstract: The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advanta… ▽ More The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advantage of Subaru's wide field of view, which is further extended with the recently completed Wide Field Corrector, PFS will enable us to carry out multi-fiber spectroscopy of 2400 targets within 1.3 degree diameter. A microlens is attached at each fiber entrance for F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. Fibers are accurately placed onto target positions by positioners, each of which consists of two stages of piezo-electric rotary motors, through iterations by using back-illuminated fiber position measurements with a wide-field metrology camera. Fibers then carry light to a set of four identical fast-Schmidt spectrographs with three color arms each: the wavelength ranges from 0.38 μm to 1.3 μm will be simultaneously observed with an average resolving power of 3000. Before and during the era of extremely large telescopes, PFS will provide the unique capability of obtaining spectra of 2400 cosmological/astrophysical targets simultaneously with an 8-10 meter class telescope. The PFS collaboration, led by IPMU, consists of USP/LNA in Brazil, Caltech/JPL, Princeton, & JHU in USA, LAM in France, ASIAA in Taiwan, and NAOJ/Subaru. △ Less

Submitted 9 October, 2012; originally announced October 2012.

Comments: 13 pages, 11 figures, submitted to "Ground-based and Airborne Instrumentation for Astronomy IV, Ian S. McLean, Suzanne K. Ramsay, Hideki Takami, Editors, Proc. SPIE 8446 (2012)"

Euclid Definition Study Report

Authors: R. Laureijs, J. Amiaux, S. Arduini, J. -L. Auguères, J. Brinchmann, R. Cole, M. Cropper, C. Dabin, L. Duvet, A. Ealet, B. Garilli, P. Gondoin, L. Guzzo, J. Hoar, H. Hoekstra, R. Holmes, T. Kitching, T. Maciaszek, Y. Mellier, F. Pasian, W. Percival, J. Rhodes, G. Saavedra Criado, M. Sauvage, R. Scaramella , et al. (194 additional authors not shown)

Abstract: Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for tw… ▽ More Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study. △ Less

Submitted 14 October, 2011; originally announced October 2011.

Comments: 116 pages, with executive summary and table of contents

Report number: ESA/SRE(2011)12

Second-layer nucleation in coherent Stranski-Krastanov growth of quantum dots

Authors: J. E. Prieto, I. Markov

Abstract: We have studied the monolayer-bilayer transformation in the case of the coherent Stranski-Krastanov growth. We have found that the energy of formation of a second layer nucleus is largest at the center of the first-layer island and smallest on its corners. Thus nucleation is expected to take place at the corners (or the edges) rather than at the center of the islands as in the case of homoepitaxy.… ▽ More We have studied the monolayer-bilayer transformation in the case of the coherent Stranski-Krastanov growth. We have found that the energy of formation of a second layer nucleus is largest at the center of the first-layer island and smallest on its corners. Thus nucleation is expected to take place at the corners (or the edges) rather than at the center of the islands as in the case of homoepitaxy. The critical nuclei have one atom in addition to a compact shape, which is either a square of i*i or a rectangle of i*(i-1) atoms, with i>1 an integer. When the edge of the initial monolayer island is much larger than the critical nucleus size, the latter is always a rectangle plus an additional atom, adsorbed at the longer edge, which gives rise to a new atomic row in order to transform the rectangle into the equilibrium square shape. △ Less

Submitted 4 November, 2011; v1 submitted 28 July, 2011; originally announced July 2011.

Comments: 6 pages, 4 figures. Accepted version, minor changes

Journal ref: Phys. Rev. B 84, 195417 (2011)

The BigBOSS Experiment

Authors: D. Schlegel, F. Abdalla, T. Abraham, C. Ahn, C. Allende Prieto, J. Annis, E. Aubourg, M. Azzaro, S. Bailey. C. Baltay, C. Baugh, C. Bebek, S. Becerril, M. Blanton, A. Bolton, B. Bromley, R. Cahn, P. -H. Carton, J. L. Cervantes-Cota, Y. Chu, M. Cortes, K. Dawson, A. Dey, M. Dickinson, H. T. Diehl, P. Doel , et al. (116 additional authors not shown)

Abstract: BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrum… ▽ More BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrument is a robotically-actuated, fiber-fed spectrograph capable of taking 5000 simultaneous spectra over a wavelength range from 340 nm to 1060 nm, with a resolution R = 3000-4800. Using data from imaging surveys that are already underway, spectroscopic targets are selected that trace the underlying dark matter distribution. In particular, targets include luminous red galaxies (LRGs) up to z = 1.0, extending the BOSS LRG survey in both redshift and survey area. To probe the universe out to even higher redshift, BigBOSS will target bright [OII] emission line galaxies (ELGs) up to z = 1.7. In total, 20 million galaxy redshifts are obtained to measure the BAO feature, trace the matter power spectrum at smaller scales, and detect redshift space distortions. BigBOSS will provide additional constraints on early dark energy and on the curvature of the universe by measuring the Ly-alpha forest in the spectra of over 600,000 2.2 < z < 3.5 quasars. BigBOSS galaxy BAO measurements combined with an analysis of the broadband power, including the Ly-alpha forest in BigBOSS quasar spectra, achieves a FOM of 395 with Planck plus Stage III priors. This FOM is based on conservative assumptions for the analysis of broad band power (kmax = 0.15), and could grow to over 600 if current work allows us to push the analysis to higher wave numbers (kmax = 0.3). BigBOSS will also place constraints on theories of modified gravity and inflation, and will measure the sum of neutrino masses to 0.024 eV accuracy. △ Less

Submitted 9 June, 2011; originally announced June 2011.

Comments: This report is based on the BigBOSS proposal submission to NOAO in October 2010, and reflects the project status at that time with minor updates

Effect of the lattice misfit on the equilibrium shape of strained islands in Volmer-Weber growth

Authors: J. E. Prieto, I. Markov

Abstract: We have studied the effect of the misfit on the equilibrium shape of three-dimensional pyramidal islands grown on a foreign substrate in the case of incomplete wetting (Volmer-Weber mode of growth). We have found that tensile islands have smaller aspect ratios compared with compressed islands owing to its better adhesion to the substrate. The average strains of consecutive layers decrease faster w… ▽ More We have studied the effect of the misfit on the equilibrium shape of three-dimensional pyramidal islands grown on a foreign substrate in the case of incomplete wetting (Volmer-Weber mode of growth). We have found that tensile islands have smaller aspect ratios compared with compressed islands owing to its better adhesion to the substrate. The average strains of consecutive layers decrease faster with thickness in compressed than in tensile islands. The strains decrease rapidly with thickness, with the consequence that above a certain height, the upper layers of the pyramid become practically unstrained and does not contribute to a further reduction in the upper base. As a result, the truncated pyramids are not expected to transform into full pyramids. Our results are in good agreement with experimental observations in different systems. △ Less

Submitted 14 October, 2010; v1 submitted 30 August, 2010; originally announced August 2010.

Comments: 6 pages, 7 figures. Accepted version, minor changes

Journal ref: Phys. Rev. B 82, 165423 (2010)

The Globular Cluster NGC 5286. II. Variable Stars

Authors: M. Zorotovic, M. Catelan, H. A. Smith, B. J. Pritzl, P. Aguirre, R. E. Angulo, M. Aravena, R. J. Assef, C. Contreras, C. Cortes, G. De Martini, M. E. Escobar, D. Gonzalez, P. Jofre, I. Lacerna, C. Navarro, O. Palma, G. E. Prieto, E. Recabarren, J. Trivino, E. Vidal

Abstract: We present the results of a search for variable stars in the globular cluster NGC 5286, which has recently been suggested to be associated with the Canis Major dwarf spheroidal galaxy. 57 variable stars were detected, only 19 of which had previously been known. Among our detections one finds 52 RR Lyrae (22 RRc and 30 RRab), 4 LPV's, and 1 type II Cepheid of the BL Herculis type. Periods are der… ▽ More We present the results of a search for variable stars in the globular cluster NGC 5286, which has recently been suggested to be associated with the Canis Major dwarf spheroidal galaxy. 57 variable stars were detected, only 19 of which had previously been known. Among our detections one finds 52 RR Lyrae (22 RRc and 30 RRab), 4 LPV's, and 1 type II Cepheid of the BL Herculis type. Periods are derived for all of the RR Lyrae as well as the Cepheid, and BV light curves are provided for all the variables. The mean period of the RRab variables is <Pab> = 0.656 days, and the number fraction of RRc stars is N(c)/N(RR) = 0.42, both consistent with an Oosterhoff II (OoII) type -- thus making NGC 5286 one of the most metal-rich ([Fe/H] = -1.67; Harris 1996) OoII globulars known to date. The minimum period of the \RRab's, namely Pab,min = 0.513 d, while still consistent with an OoII classification, falls towards the short end of the observed Pab,min distribution for OoII globular clusters. As was recently found in the case of the prototypical OoII globular cluster M15 (NGC 7078), the distribution of stars in the Bailey diagram does not strictly conform to the previously reported locus for OoII stars. We provide Fourier decomposition parameters for all of the RR Lyrae stars detected in our survey, and discuss the physical parameters derived therefrom. The values derived for the RRc's are not consistent with those typically found for OoII clusters, which may be due to the cluster's relatively high metallicity -- the latter being confirmed by our Fourier analysis of the ab-type RR Lyrae light curves. We derive for the cluster a revised distance modulus of (m-M)V = 16.04 mag. (ABRIDGED) △ Less

Submitted 9 November, 2009; originally announced November 2009.

Comments: 15 pages, 8 figures (plus 57 light curve sets, in an Appendix). The Astronomical Journal, in press

Shower approach in the simulation of ion scattering from solids

Authors: V. A. Khodyrev, R. Andrzejewski, A. Rivera, D. O. Boerma, J. E. Prieto

Abstract: An efficient approach for the simulation of ion scattering from solids is proposed. For every encountered atom, we take multiple samples of its thermal displacements among those which result in scattering with high probability to finally reach the detector. As a result, the detector is illuminated by intensive "showers", where each event of detection must be weighted according to the actual probab… ▽ More An efficient approach for the simulation of ion scattering from solids is proposed. For every encountered atom, we take multiple samples of its thermal displacements among those which result in scattering with high probability to finally reach the detector. As a result, the detector is illuminated by intensive "showers", where each event of detection must be weighted according to the actual probability of the atom displacement. The computational cost of such simulation is orders of magnitude lower than in the direct approach and a comprehensive analysis of multiple and plural scattering effects becomes possible. We use the new method for two purposes. First, the accuracy of the approximate approaches, developed mainly for ion-beam structural analysis, is verified. Second, the possibility to reproduce a wide class of experimental conditions is used to analyze some basic features of ion-solid collisions: the role of double violent collisions in low-energy ion scattering; the origin of the "surface peak" in scattering from amorphous samples; the low-energy tail in the energy spectra of scattered medium-energy ions due to plural scattering; the degradation of blocking patterns in 2D angular distributions with increasing depth of scattering. As an example of simulation for ions of MeV energies, we verify the time-reversibility for channeling/blocking of 1 MeV protons in a W crystal. The possibilities of analysis that our approach offers may be very useful for various applications in particular for structural analysis with atomic resolution. △ Less

Submitted 17 May, 2011; v1 submitted 14 April, 2009; originally announced April 2009.

Comments: 16 pages, 9 figures. Finally published version; large parts reformulated, Fig. 9 and references added

Journal ref: Phys. Rev. E 83, 056707 (2011)

Image Slicer Performances from a Demonstrator for the SNAP/JDEM Mission - Part I: Wavelength Accuracy

Authors: M-H. Aumeunier, A. Ealet, E. Prieto, C. Cerna, P-E. Crouzet

Abstract: A well-adapted visible and infrared spectrograph has been developed for the SNAP (SuperNova/Acceleration Probe) experiment proposed for JDEM. The instrument should have a high sensitivity to see faint supernovae but also a good redshift determination better than 0.003(1+z) and a precise spectrophotometry (2%). An instrument based on an integral field method with the powerful concept of imager sl… ▽ More A well-adapted visible and infrared spectrograph has been developed for the SNAP (SuperNova/Acceleration Probe) experiment proposed for JDEM. The instrument should have a high sensitivity to see faint supernovae but also a good redshift determination better than 0.003(1+z) and a precise spectrophotometry (2%). An instrument based on an integral field method with the powerful concept of imager slicing has been designed. A large prototy** effort has been performed in France which validates the concept. In particular a demonstrator reproducing the full optical configuration has been built and tested to prove the optical performances both in the visible and in the near infrared range. This paper is the first of two papers. The present paper focus on the wavelength measurement while the second one will present the spectrophotometric performances. We adress here the spectral accuracy expected both in the visible and in the near infrared range in such configuration and we demonstrate, in particular, that the image slicer enhances the instrumental performances in the spectral measurement precision by removing the slit effect. This work is supported in France by CNRS/INSU/IN2P3 and by the French spatial agency (CNES) and in US by the University of California. △ Less

Submitted 20 November, 2008; originally announced November 2008.

Comments: Submitted to PASP

Temperature-induced reversal of magnetic interlayer exchange coupling

Authors: K. M. Doebrich, M. Wietstruk, J. E. Prieto, F. Heigl, O. Krupin, K. Starke, G. Kaindl

Abstract: For epitaxial trilayers of the magnetic rare-earth metals Gd and Tb, exchange coupled through a non-magnetic Y spacer layer, element-specific hysteresis loops were recorded by the x-ray magneto-optical Kerr effect at the rare-earth $M_5$ thresholds. This allowed us to quantitatively determine the strength of interlayer exchange coupling (IEC). In addition to the expected oscillatory behavior as… ▽ More For epitaxial trilayers of the magnetic rare-earth metals Gd and Tb, exchange coupled through a non-magnetic Y spacer layer, element-specific hysteresis loops were recorded by the x-ray magneto-optical Kerr effect at the rare-earth $M_5$ thresholds. This allowed us to quantitatively determine the strength of interlayer exchange coupling (IEC). In addition to the expected oscillatory behavior as a function of spacer-layer thickness $d_Y$, a temperature-induced sign reversal of IEC was observed for constant $d_Y$, arising from magnetization-dependent electron reflectivities at the magnetic interfaces. △ Less

Submitted 27 June, 2008; v1 submitted 19 December, 2007; originally announced December 2007.

Comments: 4 pages, 4 figures; accepted version; minor changes and new Figs. 2 and 4 containing more data

Journal ref: Phys. Rev. Lett. 100, 227203 (2008)

A Search for EHB Pulsators in the Globular Cluster NGC 6752

Authors: M. Catelan, G. E. Prieto, M. Zoccali, C. Weidner, P. B. Stetson, C. Moni Bidin, M. Altmann, H. A. Smith, B. J. Pritzl, J. Borissova, J. R. De Medeiros

Abstract: We describe the status of a project whose main goal is to detect variability along the extreme horizontal branch of the globular cluster NGC 6752. Based on Magellan 6.5m data, preliminary light curves are presented for some candidate variables. By combining our time-series data, we also produce a deep CMD of unprecedented quality for the cluster which reveals a remarkable lack of main sequence b… ▽ More We describe the status of a project whose main goal is to detect variability along the extreme horizontal branch of the globular cluster NGC 6752. Based on Magellan 6.5m data, preliminary light curves are presented for some candidate variables. By combining our time-series data, we also produce a deep CMD of unprecedented quality for the cluster which reveals a remarkable lack of main sequence binaries, possibly pointing to a low primordial binary fraction. △ Less

Submitted 2 October, 2007; originally announced October 2007.

Comments: 4 pages, 2 figures, to appear in "Hot Subdwarf Stars and Related Objects", ASP Conf. Ser

Forbidden island heights in stress-driven coherent Stranski-Krastanov growth

Authors: J. E. Prieto, I. Markov

Abstract: The observed height distribution of clusters obtained in strained epitaxy has been often interpreted in terms of electronic effects. We show that some aspects can be explained classically by the interplay of strain and edge energies. We find that soft materials can transform directly from monolayer into thicker islands by two-dimensional (2D) multilayer nucleation and growth. There is a critical… ▽ More The observed height distribution of clusters obtained in strained epitaxy has been often interpreted in terms of electronic effects. We show that some aspects can be explained classically by the interplay of strain and edge energies. We find that soft materials can transform directly from monolayer into thicker islands by two-dimensional (2D) multilayer nucleation and growth. There is a critical thickness decreasing with the force constant. Thinner islands are thermodynamically forbidden, due to the insufficient stress relaxation upon clustering particularly under tensile stress. At sufficiently large misfits the barrier for 2D multilayer nucleation is significantly smaller than the barrier for subsequent single-layer nucleation. The effects are found to be quantitatively reasonable and offer a plausible explanation for the absence of thin islands and 2D growth of flattop islands usually attributed to quantum size effects. △ Less

Submitted 25 April, 2007; v1 submitted 3 November, 2006; originally announced November 2006.

Comments: 4 pages, 4 figures. Accepted version. Includes quantitative estimations comparing with experiments plus minor changes

Journal ref: Phys. Rev. Lett. 98, 176101 (2007)

An original image slicer designed for Integral Field Spectroscopy with NIRSpec/JSWT

Authors: Sébastien Vivès, Eric Prieto

Abstract: Integral Field Spectroscopy (IFS) provides a spectrum simultaneously for each spatial sample of an extended, two-dimensional field. It consists of an Integral Field Unit (IFU) which slices and re-arranges the initial field along the entrance slit of a spectrograph. This article presents an original design of IFU based on the advanced image slicer concept. To reduce optical aberrations, pupil and… ▽ More Integral Field Spectroscopy (IFS) provides a spectrum simultaneously for each spatial sample of an extended, two-dimensional field. It consists of an Integral Field Unit (IFU) which slices and re-arranges the initial field along the entrance slit of a spectrograph. This article presents an original design of IFU based on the advanced image slicer concept. To reduce optical aberrations, pupil and slit mirrors are disposed in a fan-shaped configuration that means that angles between incident and reflected beams on each elements are minimized. The fan-shaped image slicer improves image quality in terms of wavefront error by a factor 2 comparing with classical image slicer and, furthermore it guaranties a negligible level of differential aberration in the field. As an exemple, we are presenting the design LAM used for its proposal at the NIRSPEC/IFU invitation of tender. △ Less

Submitted 1 December, 2005; originally announced December 2005.

Comments: Submitted to Optical Engineering

Modeling a Slicer Mirror Using Zemax User-Defined Surface

Authors: Sébastien Vivès, Eric Prieto, Gil Moretto, Michel Saisse

Abstract: A slicer mirror is a complex surface composed by many tilted and decentered mirrors sub-surfaces. The major difficulty to model such a complex surface is the large number of parameters used to define it. The Zemax's multi-configuration mode is usually used to specify each parameters (tilts, curvatures, decenters) for each mirror sub-surface which are then considered independently. Otherwise maki… ▽ More A slicer mirror is a complex surface composed by many tilted and decentered mirrors sub-surfaces. The major difficulty to model such a complex surface is the large number of parameters used to define it. The Zemax's multi-configuration mode is usually used to specify each parameters (tilts, curvatures, decenters) for each mirror sub-surface which are then considered independently. Otherwise making use of the User-Defined Surface (UDS-DLL) Zemax capability, we are able to consider the set of sub-surfaces as a whole surface. In this paper, we present such a UDS-DLL tool comparing its performance with those of the classical multi-configuration mode. In particular, we explore the use of UDS-DLL to investigate the cross-talk due to the diffraction on the slicer array mirrors which has been a burden task when using multi-configuration mode. △ Less

Submitted 19 October, 2005; originally announced October 2005.

Comments: Submitted to the proceedings of the Durham Integral Field Spectroscopy Workshop July 4th-8th 2005

Journal ref: New Astron.Rev. 50 (2006) 271-274

Optical replication techniques for image slicers

Authors: J. Schmoll, D. J. Robertson, C. M. Dubbeldam, J. Yao, F. Bortoletto, L. Pina, R. Hudec, E. Prieto, C. Norrie, S. Ramsay-Howat, W. Preuss

Abstract: The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will b… ▽ More The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will be central to the delivery of the science case. A study of a virtual "multi-object multi-ifu spectrograph and imager" (MOMSI) for a hypothetical OWL-class telescope reveals the need for focal plane splitting, deployable imagers and very small beam steering elements like deployable IFUs. The image slicer workpackage, lead from Durham University in collaboration with LFM Bremen, TNO Delft, UKATC Edinburgh, CRAL Lyon, LAM Marseille, Padua University and REFLEX Prague, is evaluating technologies for manufacturing micro optics in large numbers to enable multi-object integral field spectroscopy. △ Less

Submitted 29 September, 2005; v1 submitted 22 September, 2005; originally announced September 2005.

Comments: To be published in the proceedings of the Durham Integral Field Spectroscopy workshop 2005 July 04-08. REPLACEMENT (Sep 29): Author list updated

Journal ref: New Astron.Rev.50:263-266,2006

Quantum-dot nucleation in strained-layer epitaxy: minimum-energy pathway in the stress-driven 2D-3D transformation

Authors: J. E. Prieto, I. Markov

Abstract: The transformation of monolayer islands into bilayer islands as a first step of the overall two-dimensional to three-dimensional (2D-3D) transformation in the coherent Stranski-Krastanov mode of growth is studied for the cases of expanded and compressed overlayers. Compressed overlayers display a nucleation-like behavior: the energy accompanying the transformation process displays a maximum at s… ▽ More The transformation of monolayer islands into bilayer islands as a first step of the overall two-dimensional to three-dimensional (2D-3D) transformation in the coherent Stranski-Krastanov mode of growth is studied for the cases of expanded and compressed overlayers. Compressed overlayers display a nucleation-like behavior: the energy accompanying the transformation process displays a maximum at some critical number of atoms, which is small for large enough values of the misfit, and then decreases gradually down to the completion of the transformation, non-monotonically due to the atomistics of the process. On the contrary, the energy change in expanded overlayers increases up to close to the completion of the transformation and then abruptly collapses with the disappearance of the monoatomic steps to produce low-energy facets. This kind of transformation takes place only in materials with strong interatomic bonding. Softer materials under tensile stress are expected to grow predominantly with a planar morphology until misfit dislocations are introduced, or to transform into 3D islands by a different mechanism. It is concluded that the coherent Stranski-Krastanov growth in expanded overlayers is much less probable than in compressed ones for kinetic reasons. △ Less

Submitted 10 November, 2005; v1 submitted 12 August, 2005; originally announced August 2005.

Comments: 8 pages, 8 figures. Final version, minor changes

Journal ref: Phys. Rev. B 72, 205412 (2005)

Magnetism of ordered Sm/Co(0001) surface structures

Authors: J. E. Prieto, O. Krupin, S. Gorovikov, K. Doebrich, G. Kaindl, K. Starke

Abstract: The epitaxial system Sm/Co(0001) was studied for Sm coverages up to 1 monolayer (ML) on top of ultrathin Co/W(110) epitaxial films. Two ordered phases were found for 1/3 and 1 ML Sm, respectively. The valence state of Sm was determined by means of photoemission and magnetic properties were measured by magneto-optical Kerr effect. We find that 1 ML Sm causes a strong increase of the coercivity wi… ▽ More The epitaxial system Sm/Co(0001) was studied for Sm coverages up to 1 monolayer (ML) on top of ultrathin Co/W(110) epitaxial films. Two ordered phases were found for 1/3 and 1 ML Sm, respectively. The valence state of Sm was determined by means of photoemission and magnetic properties were measured by magneto-optical Kerr effect. We find that 1 ML Sm causes a strong increase of the coercivity with respect to that of the underlying 10 ML Co film. Element-specific hysteresis loops, measured by using resonant soft x-ray reflectivity, show the same magnetic behaviour for the two elements. △ Less

Submitted 10 October, 2005; v1 submitted 7 June, 2005; originally announced June 2005.

Comments: 4 pages, 5 figures. Accepted version, minor changes: discussion of soft x-ray reflectivity spectra included, references added

Journal ref: Phys. Rev. B 72, 092409 (2005)

X-ray magneto-optics of lanthanide materials: principles and applications

Authors: J. E. Prieto, O. Krupin, K. Doebrich, F. Heigl, G. Kaindl, K. Starke

Abstract: Lanthanide metals are a particular class of magnetic materials in which the magnetic moments are carried mainly by the localized electrons of the 4f shell. They are frequently found in technically relevant systems, to achieve, e.g., high magnetic anisotropy. Magneto-optical methods in the x-ray range are well suited to study complex magnetic materials in an element-specific way. In this work, we… ▽ More Lanthanide metals are a particular class of magnetic materials in which the magnetic moments are carried mainly by the localized electrons of the 4f shell. They are frequently found in technically relevant systems, to achieve, e.g., high magnetic anisotropy. Magneto-optical methods in the x-ray range are well suited to study complex magnetic materials in an element-specific way. In this work, we report on recent progress on the quantitative determination of magneto-optical constants of several lanthanides in the soft x-ray region and we show some examples of applications of magneto-optics to hard-magnetic interfaces and exchange-coupled layered structures containing lanthanide elements. △ Less

Submitted 20 April, 2005; v1 submitted 25 June, 2004; originally announced June 2004.

Comments: 7 pages, 6 figures, invited contribution to the Symposium "X-ray magneto-optics" of the Spring Meeting of the German Physical Society held in Regensburg, Germany, 8-12 March 2004. Revised version, minor changes

Journal ref: Applied Physics A 80, 1021 (2005)

Supernova / Acceleration Probe: A Satellite Experiment to Study the Nature of the Dark Energy

Authors: SNAP Collaboration, G. Aldering, W. Althouse, R. Amanullah, J. Annis, P. Astier, C. Baltay, E. Barrelet, S. Basa, C. Bebek, L. Bergstrom, G. Bernstein, M. Bester, B. Bigelow, R. Blandford, R. Bohlin, A. Bonissent, C. Bower, M. Brown, M. Campbell, W. Carithers, E. Commins, W. Craig, C. Day, F. DeJongh , et al. (87 additional authors not shown)

Abstract: The Supernova / Acceleration Probe (SNAP) is a proposed space-based experiment designed to study the dark energy and alternative explanations of the acceleration of the Universe's expansion by performing a series of complementary systematics-controlled measurements. We describe a self-consistent reference mission design for building a Type Ia supernova Hubble diagram and for performing a wide-ar… ▽ More The Supernova / Acceleration Probe (SNAP) is a proposed space-based experiment designed to study the dark energy and alternative explanations of the acceleration of the Universe's expansion by performing a series of complementary systematics-controlled measurements. We describe a self-consistent reference mission design for building a Type Ia supernova Hubble diagram and for performing a wide-area weak gravitational lensing study. A 2-m wide-field telescope feeds a focal plane consisting of a 0.7 square-degree imager tiled with equal areas of optical CCDs and near infrared sensors, and a high-efficiency low-resolution integral field spectrograph. The SNAP mission will obtain high-signal-to-noise calibrated light-curves and spectra for several thousand supernovae at redshifts between z=0.1 and 1.7. A wide-field survey covering one thousand square degrees resolves ~100 galaxies per square arcminute. If we assume we live in a cosmological-constant-dominated Universe, the matter density, dark energy density, and flatness of space can all be measured with SNAP supernova and weak-lensing measurements to a systematics-limited accuracy of 1%. For a flat universe, the density-to-pressure ratio of dark energy can be similarly measured to 5% for the present value w0 and ~0.1 for the time variation w'. The large survey area, depth, spatial resolution, time-sampling, and nine-band optical to NIR photometry will support additional independent and/or complementary dark-energy measurement approaches as well as a broad range of auxiliary science programs. (Abridged) △ Less

Submitted 12 May, 2004; originally announced May 2004.

Comments: 40 pages, 18 figures, submitted to PASP, http://snap.lbl.gov

Formation and self-assembly of coherent quantum dots: some thermodynamic aspects

Authors: J. E. Prieto, E. Korutcheva, I. Markov

Abstract: Quantum dots have promising properties for optoelectronic applications. They can be grown free of dislocations in highly mismatched epitaxy in the coherent Stranski-Krastanov mode. In this chapter, some thermodynamic aspects related to the wetting in the growth and self-assembly of three-dimensional (3D) coherent islands are studied using an energy minimization scheme in a 1+1-dimensional atomic… ▽ More Quantum dots have promising properties for optoelectronic applications. They can be grown free of dislocations in highly mismatched epitaxy in the coherent Stranski-Krastanov mode. In this chapter, some thermodynamic aspects related to the wetting in the growth and self-assembly of three-dimensional (3D) coherent islands are studied using an energy minimization scheme in a 1+1-dimensional atomic model with anharmonic interactions. The conditions for equilibrium between the different phases are discussed. It is found that the thermodynamic driving force for 3D-cluster formation is the reduced adhesion of the islands to the wetting layer at their edges. In agreement with experimental observations, for values of the lattice mismatch larger than a critical misfit, a critical island size for the 2D-3D transition is found. Beyond it, monolayer islands become unstable against bilayer ones. Compressed coherent overlayers show a greater tendency to clustering than expanded ones. The transition to 3D islands takes place through a series of intermediate stable states with thicknesses discretely increasing in monolayer steps. Special emphasis is made on the analysis of the critical misfit. Additionally, the effect of neighbouring islands mediated through a deformable wetting layer is considered. The degree of wetting of the substrate by a given island depends on the size and shape distributions of the neighbouring islands. Implications for the self-assembled growth of quantum dots are discussed. △ Less

Submitted 18 January, 2006; v1 submitted 28 April, 2004; originally announced April 2004.

Comments: 25 pages, 16 figures. Final version, minor changes

Journal ref: Chapter in "Quantum Dots: Research Developments", Ed. Peter A. Ling. Series: Horizons in World Physics Vol. 251, pp. 123-147 (Nova Science, New York 2005)

Rashba Effect at Magnetic Metal Surfaces

Authors: O. Krupin, G. Bihlmayer, K. Starke, S. Gorovikov, J. E. Prieto, K. Doebrich, S. Bluegel, G. Kaindl

Abstract: We give experimental and theoretical evidence of the Rashba effect at the magnetic rare-earth metal surface Gd(0001). The Rashba effect is substantially enhanced and the Rashba parameter changes its sign when a metal-oxide surface layer is formed. The experimental observations are quantitatively described by ab initio calculations that give a detailed account of the near-surface charge density g… ▽ More We give experimental and theoretical evidence of the Rashba effect at the magnetic rare-earth metal surface Gd(0001). The Rashba effect is substantially enhanced and the Rashba parameter changes its sign when a metal-oxide surface layer is formed. The experimental observations are quantitatively described by ab initio calculations that give a detailed account of the near-surface charge density gradients causing the Rashba effect. Since the sign of the Rashba splitting depends on the magnetization direction, the findings open up new opportunities for the study of surface and interface magnetism. △ Less

Submitted 18 September, 2004; v1 submitted 16 March, 2004; originally announced March 2004.

Comments: 4 Figs

Self-assembly of quantum dots: effect of neighbor islands on the wetting in coherent Stranski-Krastanov growth

Authors: J. E. Prieto, I. Markov

Abstract: The wetting of the homogeneously strained wetting layer by dislocation-free three-dimensional islands belonging to an array has been studied. The array has been simulated as a chain of islands in 1+1 dimensions. It is found that the wetting depends on the density of the array, the size distribution and the shape of the neighbor islands. Implications for the self-assembly of quantum dots grown in… ▽ More The wetting of the homogeneously strained wetting layer by dislocation-free three-dimensional islands belonging to an array has been studied. The array has been simulated as a chain of islands in 1+1 dimensions. It is found that the wetting depends on the density of the array, the size distribution and the shape of the neighbor islands. Implications for the self-assembly of quantum dots grown in the coherent Stranski-Krastanov mode are discussed. △ Less

Submitted 25 June, 2004; v1 submitted 27 October, 2003; originally announced October 2003.

Comments: 4 pages, 6 figures, accepted version, minor changes

Journal ref: Phys. Rev. B 69, 193307 (2004)

Some thermodynamic aspects of self-assembly of arrays of quantum dots

Authors: J. E. Prieto, I. Markov

Abstract: We have studied the relative adhesion (the wetting) of dislocation-free three-dimensional islands belonging to an array of islands to the wetting layer in Stranski-Krastanov growth mode. The array has been simulated as a chain of islands in 1+1 dimensions placed on top of a wetting layer. In addition to the critical size of the two-dimensional islands for the 2D-3D transformation to occur, we fi… ▽ More We have studied the relative adhesion (the wetting) of dislocation-free three-dimensional islands belonging to an array of islands to the wetting layer in Stranski-Krastanov growth mode. The array has been simulated as a chain of islands in 1+1 dimensions placed on top of a wetting layer. In addition to the critical size of the two-dimensional islands for the 2D-3D transformation to occur, we find that the wetting depends strongly on the density of the array, the size distribution and the shape of the islands. △ Less

Submitted 11 July, 2003; originally announced July 2003.

Comments: 14 pages, 8 figures, presented at NATO Advanced Research Workshop on "Quantum dots: Fundamentals, Applications, Frontiers", Crete, Greece 20-24 June 2003

Journal ref: Chapter in "Quantum Dots: Fundamentals, Applications and Frontiers", Eds. B.A. Joyce, P.C. Kelires, A.G. Naumovets and D.D. Vvedensky, NATO Science Series II. Mathematics, Physics and Chemistry, Vol 190, pp. 157-172. (Springer 2005)

Magneto-optics of Gd and Tb in the soft x-ray resonance regions

Authors: J. E. Prieto, F. Heigl, O. Krupin, G. Kaindl, K. Starke

Abstract: We present x-ray absorption spectra around the 3d-4f and 4d-4f excitation thresholds of in-plane magnetized Gd and Tb films measured by total electron yield using circularly polarized synchrotron radiation. By matching the experimental spectra to tabulated absorption data far below and above the thresholds, the imaginary parts of the complex refractive index are determined quantitatively. The as… ▽ More We present x-ray absorption spectra around the 3d-4f and 4d-4f excitation thresholds of in-plane magnetized Gd and Tb films measured by total electron yield using circularly polarized synchrotron radiation. By matching the experimental spectra to tabulated absorption data far below and above the thresholds, the imaginary parts of the complex refractive index are determined quantitatively. The associated real parts for circularly polarized light propagating nearly parallel or antiparallel to the magnetization direction are obtained through the Kramers-Kronig relations. The derived magnetooptical parameters are used to calculate soft x-ray reflectivity spectra of a magnetized Gd film at the 3d-4f threshold, which are found to compare well with our experimental spectra. △ Less

Submitted 15 October, 2003; v1 submitted 18 December, 2002; originally announced December 2002.

Comments: 8 pages, 6 figures. Revised version, accepted for publication in Phys. Rev. B; new Figs. 1 and 6 plus minor changes

Journal ref: Phys. Rev. B 68, 134453 (2003)