-
OTFS Channel Estimation and Detection for Channels with Very Large Delay Spread
Authors:
Preety Priya,
Yi Hong,
Emanuele Viterbo
Abstract:
In low latency applications and in general, for overspread channels, channel delay spread is a large percentage of the transmission frame duration. In this paper, we consider OTFS in an overspread channel exhibiting a delay spread that exceeds the block duration in a frame, where traditional channel estimation (CE) fails. We propose a two-stage CE method based on a delay-Doppler (DD) training fram…
▽ More
In low latency applications and in general, for overspread channels, channel delay spread is a large percentage of the transmission frame duration. In this paper, we consider OTFS in an overspread channel exhibiting a delay spread that exceeds the block duration in a frame, where traditional channel estimation (CE) fails. We propose a two-stage CE method based on a delay-Doppler (DD) training frame, consisting of a dual chirp converted from time domain and a higher power pilot. The first stage employs a DD domain embedded pilot CE to estimate the aliased delays (due to modulo operation) and Doppler shifts, followed by identifying all the underspread paths not coinciding with any overspread path. The second stage utilizes time domain dual chirp correlation to estimate the actual delays and Doppler shifts of the remaining paths. This stage also resolves ambiguity in estimating delays and Doppler shifts for paths sharing same aliased delay. Furthermore, we present a modified low-complexity maximum ratio combining (MRC) detection algorithm for OTFS in overspread channels. Finally, we evaluate performance of OTFS using the proposed CE and the modified MRC detection in terms of normalized mean square error (NMSE) and bit error rate (BER).
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Computational Orbital Mechanics of Marble Motion on a 3D Printed Surface -- 1. Formal Basis
Authors:
Pooja Bhambhu,
Preety,
Paridhi Goel,
Chinkey,
Manisha Siwach,
Ananya Kumari,
Sudarshana,
Sanjana Yadav,
Shikha Yadav,
Bharti,
Poonam,
Anshumali,
Athira Vijayan,
Divakar Pathak
Abstract:
Simulating curvature due to gravity through warped surfaces is a common visualization aid in Physics education. We reprise a recent experiment exploring orbital trajectories on a precise 3D-printed surface to mimic Newtonian gravity, and elevate this analogy past the status of a mere visualization tool. We present a general analysis approach through which this straightforward experiment can be use…
▽ More
Simulating curvature due to gravity through warped surfaces is a common visualization aid in Physics education. We reprise a recent experiment exploring orbital trajectories on a precise 3D-printed surface to mimic Newtonian gravity, and elevate this analogy past the status of a mere visualization tool. We present a general analysis approach through which this straightforward experiment can be used to create a reasonably advanced computational orbital mechanics lab at the undergraduate level, creating a convenient hands-on, computational pathway to various non-trivial nuances in this discipline, such as the mean, eccentric, and true anomalies and their computation, Laplace-Runge-Lenz vector conservation, characterization of general orbits, and the extraction of orbital parameters. We show that while the motion of a marble on such a surface does not truly represent a orbital trajectory under Newtonian gravity in a strict theoretical sense, but through a proposed projection procedure, the experimentally recorded trajectories closely resemble the Kepler orbits and approximately respect the known conservation laws for orbital motion. The latter fact is demonstrated through multiple experimentally-recorded elliptical trajectories with wide-ranging eccentricities and semi-major axes.
In this first part of this two-part sequence, we lay down the formal basis of this exposition, describing the experiment, its calibration, critical assessment of the results, and the computational procedures for the transformation of raw experimental data into a form useful for orbital analysis.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Maximum Entropy Framework for a Universal Rank Order distribution with Socio-economic Applications
Authors:
Abhik Ghosh,
Preety Shreya,
Banasri Basu
Abstract:
In this paper we derive the maximum entropy characteristics of a particular rank order distribution, namely the discrete generalized beta distribution, which has recently been observed to be extremely useful in modelling many several rank-size distributions from different context in Arts and Sciences, as a two-parameter generalization of Zipf's law. Although it has been seen to provide excellent f…
▽ More
In this paper we derive the maximum entropy characteristics of a particular rank order distribution, namely the discrete generalized beta distribution, which has recently been observed to be extremely useful in modelling many several rank-size distributions from different context in Arts and Sciences, as a two-parameter generalization of Zipf's law. Although it has been seen to provide excellent fits for several real world empirical datasets, the underlying theory responsible for the success of this particular rank order distribution is not explored properly. Here we, for the first time, provide its generating process which describes it as a natural maximum entropy distribution under an appropriate bivariate utility constraint. Further, considering the similarity of the proposed utility function with the usual logarithmic utility function from economic literature, we have also explored its acceptability in universal modeling of different types of socio-economic factors within a country as well as across the countries. The values of distributional parameters estimated through a rigorous statistical estimation method, along with the $entropy$ values, are used to characterize the distributions of all these socio-economic factors over the years.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Water-resistant carbon nanotube based strain sensor for monitoring structural integrity
Authors:
Preety Ahuja,
Shingo Akiyama,
Sanjeev Kumar Ujjain,
Radovan Kukobat,
Fernando Vallejos-Burgos,
Ryusuke Futamura,
Takuya Hayashi,
Mutsumi Kimura,
David Tomanek,
Katsumi Kaneko
Abstract:
Monitoring structural integrity during and after extreme events such as an earthquake or a tsunami is a mundane yet important task that still awaits a workable solution. Currently available stress sensors are not sufficiently robust and are affected by humidity. Insufficient information about crack formation preceding structural failure increases risk during rescue operations significantly. Design…
▽ More
Monitoring structural integrity during and after extreme events such as an earthquake or a tsunami is a mundane yet important task that still awaits a workable solution. Currently available stress sensors are not sufficiently robust and are affected by humidity. Insufficient information about crack formation preceding structural failure increases risk during rescue operations significantly. Designing durable stress sensors that are not affected by harsh and changing environment and do not fail under catastrophic conditions is a fundamental challenge. To address this problem, we developed a stress sensor based on creased single-walled carbon nanotubes (SWCNTs) encapsulated in a non-fluorinated superhydrophobic coating. The creased SWCNT film was fabricated and integrated in polydimethylsiloxane (PDMS) to provide a highly linear response under elastic deformation. The non-fluorinated water-repellent coating was fabricated by spray-coating the film with nanosilica particles, providing water resistance during elastic deformation. The compact design and superior water resistance of the sensor, along with its appealing linearity and large stretchability, demonstrates the scalability of this approach for fabricating efficient strain sensors for applications in infrastructure and robotic safety management as well as advanced wearable sensors.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.
-
A Cancer Biotherapy Resource
Authors:
Preety Priya,
Vicente M. Reyes
Abstract:
Cancer Biotherapy (CB), as opposed to cancer chemotherapy, is the use of macromolecular, biological agents instead of organic chemicals or drugs to treat cancer. Biological agents usually have higher selectivity and have less toxic side effects than chemical agents. The I.S.B.T.C., being the only major information database for CB, seems lacking in some crucial information on various cancer biother…
▽ More
Cancer Biotherapy (CB), as opposed to cancer chemotherapy, is the use of macromolecular, biological agents instead of organic chemicals or drugs to treat cancer. Biological agents usually have higher selectivity and have less toxic side effects than chemical agents. The I.S.B.T.C., being the only major information database for CB, seems lacking in some crucial information on various cancer biotherapy regimens. It is thus necessary to have a comprehensive curated CB database. The database accessible to cancer patients and also should be a sounding board for scientific ideas by cancer researchers. The database/web server has information about main families of cancer biotherapy regimens to date, namely, Protein Kinase Inhibitors, Ras Pathway Inhibitors, Cell-Cycle Active Agents, MAbs (monoclonal antibodies), ADEPT (Antibody-Directed Enzyme Pro-Drug Therapy), Cytokines, Anti-Angiogenesis Agents, Cancer Vaccines, Cell-based Immunotherapeutics, Gene Therapy, Hematopoietic Growth Factors, Retinoids, and CAAT. For each biotherapy regimen, we will extract the following attributes in populating the database: Cancer type, Gene/s and gene product/s involved, Gene sequence, Organs affected, Reference papers, Clinical phase/stage, Survival rate, Clinical test center locations, Cost, Patient blogs, Researcher blogs, and Future work. The database will be accessible to public through a website and had FAQs for making it understandable to the laymen and discussion page for researchers to express their views and ideas. In addition to information about the biotherapy regimens, the website will link to other biologically significant databases like structural proteomics, metabolomics, glycomics, and lipidomics databases, as well as to news around the world regarding cancer therapy results. The database attributes would be regularly updated for novel attributes as discoveries are made.
△ Less
Submitted 15 December, 2015;
originally announced February 2016.
-
Optimal engine performance using inference for non-identical finite source and sink
Authors:
Preety Aneja,
Harsh Katyayan,
Ramandeep S. Johal
Abstract:
We quantify the prior information to infer the optimal characteristics for a constrained thermodynamic process of maximum work extraction for a pair of non-identical finite systems. The total entropy of the whole system remains conserved. The ignorance is assumed about the final temperature of the finite systems and then a prior distribution is assigned to the unknown temperatures. We derive the e…
▽ More
We quantify the prior information to infer the optimal characteristics for a constrained thermodynamic process of maximum work extraction for a pair of non-identical finite systems. The total entropy of the whole system remains conserved. The ignorance is assumed about the final temperature of the finite systems and then a prior distribution is assigned to the unknown temperatures. We derive the estimates of efficiency for this reversible model of heat engine with incomplete information. The estimates show good agreement with efficiency at optimal work for arbitrary sizes of systems, however the estimates become exact when one of the reservoir becomes very large in comparison to the other.
△ Less
Submitted 19 February, 2015;
originally announced February 2015.
-
On the form of prior for constrained thermodynamic processes with uncertainty
Authors:
Preety Aneja,
Ramandeep S. Johal
Abstract:
We consider the standard thermodynamic processes with constraints, but with additional uncertainty about the control parameters. Motivated by inductive reasoning, we assign prior distribution that provides a rational guess about likely values of the uncertain parameters.The priors are derived explicitly for both the entropy conserving and the energy conserving processes. The proposed form is usefu…
▽ More
We consider the standard thermodynamic processes with constraints, but with additional uncertainty about the control parameters. Motivated by inductive reasoning, we assign prior distribution that provides a rational guess about likely values of the uncertain parameters.The priors are derived explicitly for both the entropy conserving and the energy conserving processes. The proposed form is useful when the constraint equation cannot be treated analytically. The inference is performed using spin-1/2 systems as models for heat reservoirs. Analytical results are derived in the high temperatures limit. Comparisons are found between the estimates of thermal quantities and the optimal values described by extremum principles. We also seek a intuitive interpretation of the prior and show that it becomes uniform over the quantity which is conserved in the process. We find further points of correspondence between the inference based approach and the thermodynamic framework.
△ Less
Submitted 2 April, 2014;
originally announced April 2014.
-
Informative priors and the analogy between quantum and classical heat engines
Authors:
George Thomas,
Preety Aneja,
Ramandeep S. Johal
Abstract:
When incomplete information about the control parameters is quantified as a prior distribution, a subtle connection emerges between quantum heat engines and their classical analogs. We study the quantum model where the uncertain parameters are the intrinsic energy scales and compare with the classical models where the intermediate temperature is the uncertain parameter. The prior distribution quan…
▽ More
When incomplete information about the control parameters is quantified as a prior distribution, a subtle connection emerges between quantum heat engines and their classical analogs. We study the quantum model where the uncertain parameters are the intrinsic energy scales and compare with the classical models where the intermediate temperature is the uncertain parameter. The prior distribution quantifying the incomplete information has the form $π(x)\propto 1/x$ in both the quantum and the classical models. The expected efficiency calculated in near-equilibrium limit approaches the value of one third of Carnot efficiency.
△ Less
Submitted 3 May, 2012;
originally announced May 2012.
-
Ignorance based inference of optimality in thermodynamic processes
Authors:
Preety Aneja,
Ramandeep S. Johal
Abstract:
We derive ignorance based prior distribution to quantify incomplete information and show its use to estimate the optimal work characteristics of a heat engine.
We derive ignorance based prior distribution to quantify incomplete information and show its use to estimate the optimal work characteristics of a heat engine.
△ Less
Submitted 10 April, 2012;
originally announced April 2012.