-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Skyrmionic device for three dimensional magnetic field sensing enabled by spin-orbit torques
Authors:
Sabri Koraltan,
Rahul Gupta,
Reshma Peremadathil Pradeep,
Fabian Kammerbauer,
Iryna Kononenko,
Klemens Prügl,
Michael Kirsch,
Bernd Aichner,
Santiago Helbig,
Florian Bruckner,
Claas Abert,
Andrada Oana Mandru,
Armin Satz,
Gerhard Jakob,
Hans Josef Hug,
Mathias Kläui,
Dieter Suess
Abstract:
Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multila…
▽ More
Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multilayers, as shown by magnetic force microscopy images and micromagnetic simulations. We perform magnetic transport measurements to show that we can sense both in-plane and out-of-plane magnetic fields by means of a differential measurement scheme in which the symmetry of the SOT leads to cancelation of the DC offset. With the magnetic parameters obtained by vibrating sample magnetometry and ferromagnetic resonance measurements, we perform finite-temperature micromagnetic simulations, where we investigate the fundamental origin of the sensing signal. We identify the topological transformation between skyrmions, stripes and type-II bubbles that leads to a change in the resistance that is read-out by the anomalous Hall effect. Our study presents a novel application for skyrmions, where a differential measurement sensing concept is applied to quantify external magnetic fields paving the way towards more energy efficient applications in skyrmionics based spintronics.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Daksha: On Alert for High Energy Transients
Authors:
Varun Bhalerao,
Santosh Vadawale,
Shriharsh Tendulkar,
Dipankar Bhattacharya,
Vikram Rana,
Hitesh Kumar L. Adalja,
Hrishikesh Belatikar,
Mahesh Bhaganagare,
Gulab Dewangan,
Abhijeet Ghodgaonkar,
Shiv Kumar Goyal,
Suresh Gunasekaran,
P J Guruprasad,
Jayprakash G. Koyande,
Salil Kulkarni,
APK Kutty,
Tinkal Ladiya,
Deepak Marla,
Sujay Mate,
N. P. S. Mithun,
Rakesh Mote,
Sanjoli Narang,
Ayush Nema,
Sudhanshu Nimbalkar,
Archana Pai
, et al. (23 additional authors not shown)
Abstract:
We present Daksha, a proposed high energy transients mission for the study of electromagnetic counterparts of gravitational wave sources, and gamma ray bursts. Daksha will comprise of two satellites in low earth equatorial orbits, on opposite sides of earth. Each satellite will carry three types of detectors to cover the entire sky in an energy range from 1 keV to >1 MeV. Any transients detected o…
▽ More
We present Daksha, a proposed high energy transients mission for the study of electromagnetic counterparts of gravitational wave sources, and gamma ray bursts. Daksha will comprise of two satellites in low earth equatorial orbits, on opposite sides of earth. Each satellite will carry three types of detectors to cover the entire sky in an energy range from 1 keV to >1 MeV. Any transients detected on-board will be announced publicly within minutes of discovery. All photon data will be downloaded in ground station passes to obtain source positions, spectra, and light curves. In addition, Daksha will address a wide range of science cases including monitoring X-ray pulsars, studies of magnetars, solar flares, searches for fast radio burst counterparts, routine monitoring of bright persistent high energy sources, terrestrial gamma-ray flashes, and probing primordial black hole abundances through lensing. In this paper, we discuss the technical capabilities of Daksha, while the detailed science case is discussed in a separate paper.
△ Less
Submitted 27 January, 2024; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Science with the Daksha High Energy Transients Mission
Authors:
Varun Bhalerao,
Disha Sawant,
Archana Pai,
Shriharsh Tendulkar,
Santosh Vadawale,
Dipankar Bhattacharya,
Vikram Rana,
Hitesh Kumar L. Adalja,
G C Anupama,
Suman Bala,
Smaranika Banerjee,
Judhajeet Basu,
Hrishikesh Belatikar,
Paz Beniamini,
Mahesh Bhaganagare,
Ankush Bhaskar,
Soumyadeep Bhattacharjee,
Sukanta Bose,
Brad Cenko,
Mehul Vijay Chanda,
Gulab Dewangan,
Vishal Dixit,
Anirban Dutta,
Priyanka Gawade,
Abhijeet Ghodgaonkar
, et al. (50 additional authors not shown)
Abstract:
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide…
▽ More
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide variety of science cases. With its broadband spectral response, high sensitivity, and continuous all-sky coverage, it will discover fainter and rarer sources than any other existing or proposed mission. Daksha can make key strides in GRB research with polarization studies, prompt soft spectroscopy, and fine time-resolved spectral studies. Daksha will provide continuous monitoring of X-ray pulsars. It will detect magnetar outbursts and high energy counterparts to Fast Radio Bursts. Using Earth occultation to measure source fluxes, the two satellites together will obtain daily flux measurements of bright hard X-ray sources including active galactic nuclei, X-ray binaries, and slow transients like Novae. Correlation studies between the two satellites can be used to probe primordial black holes through lensing. Daksha will have a set of detectors continuously pointing towards the Sun, providing excellent hard X-ray monitoring data. Closer to home, the high sensitivity and time resolution of Daksha can be leveraged for the characterization of Terrestrial Gamma-ray Flashes.
△ Less
Submitted 27 January, 2024; v1 submitted 22 November, 2022;
originally announced November 2022.
-
A generalized event selection algorithm for AstroSat CZT Imager data
Authors:
Ajay Ratheesh,
A. R. Rao,
N. P. S Mithun,
Santosh V. Vadawale,
Ajay Vibhute,
Dipankar Bhattacharya,
Priya Pradeep,
S. Sreekumar,
Varun Bhalerao
Abstract:
The Cadmium Zinc Telluride (CZT) Imager on board AstroSat is a hard X-ray imaging spectrometer operating in the energy range of 20 $-$ 100 keV. It also acts as an open hard X-ray monitor above 100 keV capable of detecting transient events like the Gamma-ray Bursts (GRBs). Additionally, the instrument has the sensitivity to measure hard X-ray polarization in the energy range of 100 $-$ 400 keV for…
▽ More
The Cadmium Zinc Telluride (CZT) Imager on board AstroSat is a hard X-ray imaging spectrometer operating in the energy range of 20 $-$ 100 keV. It also acts as an open hard X-ray monitor above 100 keV capable of detecting transient events like the Gamma-ray Bursts (GRBs). Additionally, the instrument has the sensitivity to measure hard X-ray polarization in the energy range of 100 $-$ 400 keV for bright on-axis sources like Crab and Cygnus X-1 and bright GRBs. As hard X-ray instruments like CZTI are sensitive to cosmic rays in addition to X-rays, it is required to identify and remove particle induced or other noise events and select events for scientific analysis of the data. The present CZTI data analysis pipeline includes algorithms for such event selection, but they have certain limitations. They were primarily designed for the analysis of data from persistent X-ray sources where the source flux is much less than the background and thus are not best suited for sources like GRBs. Here, we re-examine the characteristics of noise events in CZTI and present a generalized event selection method that caters to the analysis of data for all types of sources. The efficacy of the new method is reviewed by examining the Poissonian behavior of the selected events and the signal to noise ratio for GRBs.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Characterisation of Cosmic Ray Induced Noise Events in AstroSat-CZT Imager
Authors:
Debdutta Paul,
A. R. Rao,
Ajay Ratheesh,
N. P. S. Mithun,
S. V. Vadawale,
Ajay Vibhute,
Dipankar Bhattacharya,
Priya Pradeep,
S. Sreekumar
Abstract:
The Cadmium Zinc Telluride (CZT) Imager onboard AstroSat, consists of pixelated CZT detectors, which are sensitive to hard X-rays above 20 keV. The individual pixels are triggered by ionising events occurring in them, and the detectors operate in a self-triggered mode, recording each event separately with information about its time of incidence, detector co-ordinates, and channel that scales with…
▽ More
The Cadmium Zinc Telluride (CZT) Imager onboard AstroSat, consists of pixelated CZT detectors, which are sensitive to hard X-rays above 20 keV. The individual pixels are triggered by ionising events occurring in them, and the detectors operate in a self-triggered mode, recording each event separately with information about its time of incidence, detector co-ordinates, and channel that scales with the amount of ionisation. The detectors are sensitive not only to photons from astrophysical sources of interest, but also prone to a number of other events like background X-rays, cosmic rays, and noise in detectors or the electronics. In this work a detailed analysis of the effect of cosmic rays on the detectors is made and it is found that cosmic rays can trigger multiple events which are closely packed in time (called 'bunches'). Higher energy cosmic rays, however, can also generate delayed emissions, a signature previously seen in the PICsIT detector on-board INTEGRAL. An algorithm to automatically detect them based on their spatial clustering properties is presented. Residual noise events are examined using examples of Gamma Ray Bursts as target sources.
△ Less
Submitted 12 April, 2021; v1 submitted 7 December, 2019;
originally announced December 2019.
-
AstroSat CZT Imager observations of GRB 151006A: timing, spectroscopy, and polarisation study
Authors:
A. R. Rao,
Vikas Chand,
M. K. Hingar,
S. Iyyani,
Rakesh Khanna,
A. P. K. Kutty,
J. P. Malkar,
D. Paul,
V. B. Bhalerao,
D. Bhattacharya,
G. C. Dewangan,
Pramod Pawar,
A. M. Vibhute,
T. Chattopadhyay,
N. P. S. Mithun,
S. V. Vadawale,
N. Vagshette,
R. Basak,
P. Pradeep,
Essy Samuel,
S. Sreekumar,
P. Vinod,
K. H. Navalgund,
R. Pandiyan,
K. S. Sarma
, et al. (2 additional authors not shown)
Abstract:
AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift,…
▽ More
AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift, spectral parameters similar to that obtained from Fermi/GBM. Hence CZT Imager would be a useful addition to the currently operating GRB instruments (Swift and Fermi). Specifically, we argue that the CZT Imager will be most useful for the short hard GRBs by providing localisation for those detected by Fermi and spectral information for those detected only by Swift. We also provide preliminary results on a new exciting capability of this instrument: CZT Imager is able to identify Compton scattered events thereby providing polarisation information for bright GRBs. GRB 151006A, in spite of being relatively faint, shows hints of a polarisation signal at 100-300 keV (though at a low significance level). We point out that CZT Imager should provide significant time resolved polarisation measurements for GRBs that have fluence 3 times higher than that of GRB 151006A. We estimate that the number of such bright GRBs detectable by CZT Imager is 5 - 6 per year. CZT Imager can also act as a good hard X-ray monitoring device for possible electromagnetic counterparts of Gravitational Wave events.
△ Less
Submitted 26 August, 2016;
originally announced August 2016.