Showing 1–50 of 88 results for author: Powers, T

Development of a plasma simulation tool for accelerating cavities

Authors: N. K. Raut, I. H. Senevirathne, T. Ganey, P. Dhakal, T. Powers

Abstract: Plasma processing of superconducting radio frequency (SRF) cavities has shown an improvement in accelerating gradient by reducing the radiation due to field emission and multipacting. Plasma processing is a common technique where the free oxygen produced by the plasma breaks down and removes hydrocarbons from surfaces. This increases the work function and reduces the secondary emission coefficient… ▽ More Plasma processing of superconducting radio frequency (SRF) cavities has shown an improvement in accelerating gradient by reducing the radiation due to field emission and multipacting. Plasma processing is a common technique where the free oxygen produced by the plasma breaks down and removes hydrocarbons from surfaces. This increases the work function and reduces the secondary emission coefficient. The hydrocarbon fragments of H2, CO, CO2, and H2O are removed from the system with the process gas which is flowing through the system. Here, we present COMSOL for the first time to simulate the plasma processing of an SRF cavity. In this work, we use Jefferson Lab's C75 SRF cavities design as our case study. Using simulation, we predict the condition of plasma ignition inside the SRF cavity. The simulation provides information about the optimal rf coupling to the cavity, mode for plasma ignition, choice of gas concentration, power, and pressure. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Trust AI Regulation? Discerning users are vital to build trust and effective AI regulation

Authors: Zainab Alalawi, Paolo Bova, Theodor Cimpeanu, Alessandro Di Stefano, Manh Hong Duong, Elias Fernandez Domingos, The Anh Han, Marcus Krellner, Bianca Ogbo, Simon T. Powers, Filippo Zimmaro

Abstract: There is general agreement that some form of regulation is necessary both for AI creators to be incentivised to develop trustworthy systems, and for users to actually trust those systems. But there is much debate about what form these regulations should take and how they should be implemented. Most work in this area has been qualitative, and has not been able to make formal predictions. Here, we p… ▽ More There is general agreement that some form of regulation is necessary both for AI creators to be incentivised to develop trustworthy systems, and for users to actually trust those systems. But there is much debate about what form these regulations should take and how they should be implemented. Most work in this area has been qualitative, and has not been able to make formal predictions. Here, we propose that evolutionary game theory can be used to quantitatively model the dilemmas faced by users, AI creators, and regulators, and provide insights into the possible effects of different regulatory regimes. We show that creating trustworthy AI and user trust requires regulators to be incentivised to regulate effectively. We demonstrate the effectiveness of two mechanisms that can achieve this. The first is where governments can recognise and reward regulators that do a good job. In that case, if the AI system is not too risky for users then some level of trustworthy development and user trust evolves. We then consider an alternative solution, where users can condition their trust decision on the effectiveness of the regulators. This leads to effective regulation, and consequently the development of trustworthy AI and user trust, provided that the cost of implementing regulations is not too high. Our findings highlight the importance of considering the effect of different regulatory regimes from an evolutionary game theoretic perspective. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Using Variational Eigensolvers on Low-End Hardware to Find the Ground State Energy of Simple Molecules

Authors: T. Powers, R. M. Rajapakse

Abstract: Key properties of physical systems can be described by the eigenvalues of matrices that represent the system. Computational algorithms that determine the eigenvalues of these matrices exist, but they generally suffer from a loss of performance as the matrix grows in size. This process can be expanded to quantum computation to find the eigenvalues with better performance than the classical algorith… ▽ More Key properties of physical systems can be described by the eigenvalues of matrices that represent the system. Computational algorithms that determine the eigenvalues of these matrices exist, but they generally suffer from a loss of performance as the matrix grows in size. This process can be expanded to quantum computation to find the eigenvalues with better performance than the classical algorithms. One application of such an eigenvalue solver is to determine energy levels of a molecule given a matrix representation of its Hamiltonian using the variational principle. Using a variational quantum eigensolver, we determine the ground state energies of different molecules. We focus on the choice of optimization strategy for a Qiskit simulator on low-end hardware. The benefits of several different optimizers were weighed in terms of accuracy in comparison to an analytic classical solution as well as code efficiency. △ Less

Submitted 29 October, 2023; originally announced October 2023.

Internally heated and fully compressible convection: flow morphology and scaling laws

Authors: Whitney T. Powers, Evan H. Anders, Benjamin P. Brown

Abstract: In stars and planets natural processes heat convective flows in the bulk of a convective region rather than at hard boundaries. By characterizing how convective dynamics are determined by the strength of an internal heating source we can gain insight into the processes driving astrophysical convection. Internally heated convection has been studied extensively in incompressible fluids, but the effe… ▽ More In stars and planets natural processes heat convective flows in the bulk of a convective region rather than at hard boundaries. By characterizing how convective dynamics are determined by the strength of an internal heating source we can gain insight into the processes driving astrophysical convection. Internally heated convection has been studied extensively in incompressible fluids, but the effects of stratification and compressibility have not been examined in detail. In this work, we study fully compressible convection driven by a spatially uniform heating source in 2D and 3D Cartesian, hydrodynamic simulations. We use a fixed temperature upper boundary condition which results in a system that is internally heated in the bulk and cooled at the top. We find that the flow speed, as measured by the Mach number, and turbulence, as measured by the Reynolds number, can be independently controlled by separately varying the characteristic temperature gradient from internal heating and the diffusivities. 2D simulations at a fixed Mach number (flow speed) demonstrate consistent power at low wavenumber as diffusivities are decreased. We observe convection where the velocity distribution is skewed towards cold, fast downflows, and that the flow speed is related to the length scale and entropy gradient of the upper boundary where the downflows are driven. We additionally find a heat transport scaling law which is consistent with prior incompressible work. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 22 pages, 12 figures, submitted to Phys. Rev. Fluids

Journal ref: Phys. Rev. Fluids 9 (2024), 043501

Chiral fluid membranes with orientational order and multiple edges

Authors: Lijie Ding, Robert A. Pelcovits, Thomas R. Powers

Abstract: We carry out Monte Carlo simulations on fluid membranes with orientational order and multiple edges in the presence and absence of external forces. The membrane resists bending and has an edge tension, the orientational order couples with the membrane surface normal through a cost for tilting, and there is a chiral liquid crystalline interaction. In the absence of external forces, a membrane initi… ▽ More We carry out Monte Carlo simulations on fluid membranes with orientational order and multiple edges in the presence and absence of external forces. The membrane resists bending and has an edge tension, the orientational order couples with the membrane surface normal through a cost for tilting, and there is a chiral liquid crystalline interaction. In the absence of external forces, a membrane initialized as a vesicle will form a disk at low chirality, with the directors forming a smectic-A phase with alignment perpendicular to the membrane surface except near the edge. At large chirality a catenoid-like shape or a trinoid-like shape is formed, depending on the number of edges in the initial vesicle. This shape change is accompanied by cholesteric ordering of the directors and multiple $π$ walls connecting the membrane edges and wrap** around the membrane neck. If the membrane is initialized instead in a cylindrical shape and stretched by an external force, it maintains a nearly cylindrical shape but additional liquid crystalline phases appear. For large tilt coupling and low chirality, a smectic-A phase forms. For lower values of the tilt coupling, a nematic phase appears at zero chirality with the average director oriented perpendicular to the long axis of the membrane, while for nonzero chirality a cholesteric phase appears. The $π$ walls are tilt walls at low chirality and transition to twist walls as chirality is increased. We construct a continuum model of the director field to explain this behavior. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: 12 pages, 13 figures

Flow states of two dimensional active gels driven by external shear

Authors: Wan Luo, Aparna Baskaran, Robert A. Pelcovits, Thomas R. Powers

Abstract: Using a minimal hydrodynamic model, we theoretically and computationally study active gels in straight and annular two-dimensional channels subject to an externally imposed shear. The gels are isotropic in the absence of externally- or activity-driven shear, but have nematic order that increases with shear rate. Using the finite element method, we determine the possible flow states for a range of… ▽ More Using a minimal hydrodynamic model, we theoretically and computationally study active gels in straight and annular two-dimensional channels subject to an externally imposed shear. The gels are isotropic in the absence of externally- or activity-driven shear, but have nematic order that increases with shear rate. Using the finite element method, we determine the possible flow states for a range of activities and shear rates. Linear stability analysis of an unconfined gel in a straight channel shows that an externally imposed shear flow can stabilize an extensile fluid that would be unstable to spontaneous flow in the absence of the shear flow, and destabilize a contractile fluid that would be stable against spontaneous flow in the absence of shear flow. These results are in rough agreement with the stability boundaries between the base shear flow state and the nonlinear flow states that we find numerically for a confined active gel. For extensile fluids, we find three kinds of nonlinear flow states in the range of parameters we study: unidirectional flows, oscillatory flows, and dancing flows. To highlight the activity-driven spontaneous component of the nonlinear flows, we characterize these states by the average volumetric flow rate and the wall stress. For contractile fluids, we only find the linear shear flow and a nonlinear unidirectional flow in the range of parameters that we studied. For large magnitudes of the activity, the unidirectional contractile flow develops a boundary layer. Our analysis of annular channels shows how curvature of the streamlines in the base flow affects the transitions among flow states. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Simulation of the dynamics of gas mixtures during plasma processing in the C75 Cavity

Authors: N. K. Raut, T. Ganey, P. Dhakal, T. Powers

Abstract: Plasma processing using a mixture of noble gas and oxygen is a technique that is currently being used to reduce field emission and multipacting in accelerating cavities. Plasma is created inside the cavity when the gas mixture is exposed to an electromagnetic field that is generated by applying RF power through the fundamental power or higher-order mode couplers. Oxygen ions and atomic oxygen are… ▽ More Plasma processing using a mixture of noble gas and oxygen is a technique that is currently being used to reduce field emission and multipacting in accelerating cavities. Plasma is created inside the cavity when the gas mixture is exposed to an electromagnetic field that is generated by applying RF power through the fundamental power or higher-order mode couplers. Oxygen ions and atomic oxygen are created in the plasma which breaks down the hydrocarbons on the surface of the cavity and the residuals from this process are removed as part of the process gas flow. Removal of hydrocarbons from the surface increases the work function and reduces the secondary emission coefficient. This work describes the initial results of plasma simulation, which provides insight into the ignition process, distribution of different species, and interactions of free oxygen and oxygen ions with the cavity surfaces. The simulations have been done with an Ar/O2 plasma using COMSOL multiphysics. These simulations help in understanding the dynamics and control of plasma inside the cavity and the exploration of different gas mixtures. △ Less

Submitted 19 June, 2023; originally announced June 2023.

The Puzzling Structure of Solar Convection: Window into the Dynamo

Authors: Nicholas A. Featherstone, Kyle C. Augustson, Jonathan M. Aurnou, Catherine Blume, Benjamin P. Brown, Nicholas Brummell, Keaton J. Burns, Michael A. Calkins, Maria Camisassa, Mausumi Dikpati, Yuhong Fan, J. R. Fuentes, Gustavo Guerrero, Bradley W. Hindman, Keith Julien, Irina N. Kitiashvili, Lydia Korre, Daniel Lecoanet, Bhishek Manek, Loren Matilsky, Mark Miesch, Nicholas J. Nelson, Jeffrey S. Oishi, Whitney T. Powers, Matthias Rempel , et al. (3 additional authors not shown)

Abstract: The operation of the solar dynamo, with all of its remarkable spatio-temporal ordering, remains an outstanding problem of modern solar physics. A number of mechanisms that might plausibly contribute to its operation have been proposed, but the relative role played by each remains unclear. This uncertainty stems from continuing questions concerning the speed and structure of deep-seated convective… ▽ More The operation of the solar dynamo, with all of its remarkable spatio-temporal ordering, remains an outstanding problem of modern solar physics. A number of mechanisms that might plausibly contribute to its operation have been proposed, but the relative role played by each remains unclear. This uncertainty stems from continuing questions concerning the speed and structure of deep-seated convective flows. Those flows are in-turn thought to sustain both the Sun's turbulent EMF and the large-scale flows of differential rotation and meridional circulation suspected of influencing the dynamo's organization and timing. Continued progress in this area is complicated by (i) inconsistencies between helioseismic measurements of convective and meridional flow made with different techniques and instruments, and (ii) a lack of high-latitude data for convection, differential rotation, and meridional flow. We suggest that the path forward to resolving these difficulties is twofold. First, the acquisition of long-term helioseismic and emissivity measurements obtained from a polar vantage point is vital to complete our picture of the Sun's outer convection zone. Second, sustained and expanded investment in theory-oriented and combined theory/observational research initiatives will be crucial to fully exploit these new observations and to resolve inconsistencies between existing measurements. △ Less

Submitted 15 May, 2023; originally announced May 2023.

Comments: White paper submitted to the Decadal Survey for Solar and Space Physics 2024-2033. 7 pages; 4 figures

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Authors: G. Ciovati, J. Anderson, S. Balachandran, G. Cheng, B. Coriton, E. Daly, P. Dhakal, A. Gurevich, F. Hannon, K. Harding, L. Holland, F. Marhauser, K. McLaughlin, D. Packard, T. Powers, U. Pudasaini, J. Rathke, R. Rimmer, T. Schultheiss, H. Vennekate, D. Vollmer

Abstract: The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by therm… ▽ More The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $μ$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain. △ Less

Submitted 22 March, 2023; v1 submitted 14 February, 2023; originally announced February 2023.

Journal ref: Phys. Rev. Accel. Beams 26, 044701 (2023)

Promoting Social Behaviour in Reducing Peak Electricity Consumption Using Multi-Agent Systems

Authors: Nathan A. Brooks, Simon T. Powers, James M. Borg

Abstract: As we transition to renewable energy sources, addressing their inflexibility during peak demand becomes crucial. It is therefore important to reduce the peak load placed on our energy system. For households, this entails spreading high-power appliance usage like dishwashers and washing machines throughout the day. Traditional approaches to spreading out usage have relied on differential pricing se… ▽ More As we transition to renewable energy sources, addressing their inflexibility during peak demand becomes crucial. It is therefore important to reduce the peak load placed on our energy system. For households, this entails spreading high-power appliance usage like dishwashers and washing machines throughout the day. Traditional approaches to spreading out usage have relied on differential pricing set by a centralised utility company, but this has been ineffective. Our previous research investigated a decentralised mechanism where agents receive an initial allocation of time-slots to use their appliances, which they can exchange with others. This was found to be an effective approach to reducing the peak load when we introduced social capital, the tracking of favours, to incentivise agents to accept exchanges that do not immediately benefit them. This system encouraged self-interested agents to learn socially beneficial behaviour to earn social capital that they could later use to improve their own performance. In this paper we expand this work by implementing real world household appliance usage data to ensure that our mechanism could adapt to the challenging demand needs of real households. We also demonstrate how smaller and more diverse populations can optimise more effectively than larger community energy systems. △ Less

Submitted 23 November, 2023; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: arXiv admin note: text overlap with arXiv:2006.14526

In Situ Plasma Processing of Superconducting Cavities at Jefferson Lab

Authors: Tom Powers, Natalie Brock, Tiffany Ganey

Abstract: Jefferson Lab began a plasma processing program start-ing in the spring of 2019. Plasma processing is a common technique for removing hydrocarbons from surfaces, which increases the work function and reduces the sec-ondary emission coefficient. Unlike helium processing which relies on ion bombardment of the field emitters, plasma processing uses free oxygen produced in the plasma to break down the… ▽ More Jefferson Lab began a plasma processing program start-ing in the spring of 2019. Plasma processing is a common technique for removing hydrocarbons from surfaces, which increases the work function and reduces the sec-ondary emission coefficient. Unlike helium processing which relies on ion bombardment of the field emitters, plasma processing uses free oxygen produced in the plasma to break down the hydrocarbons on the surface of the cavity. The residuals of the hydrocarbons in the form of water, carbon monoxide and carbon dioxide are re-moved from the cryomodule as part of the process gas flow. The initial focus of the effort is processing C100 cavities by injecting RF power into the HOM coupler ports. We will then start investigating processing of C50 cavities by introducing RF into the fundamental power coupler. The plan is to start processing cryomodules in the CEBAF tunnel in the mid-term future, with a goal of improving the operational gradients and the energy mar-gin of the linacs. This work will describe the systems and methods used at JLAB for processing cavities using an argon oxygen gas mixture. Before and after plasma pro-cessing results will also be presented. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: Submitted to SRF conference 2021

Evolved Open-Endedness in Cultural Evolution: A New Dimension in Open-Ended Evolution Research

Authors: James M. Borg, Andrew Buskell, Rohan Kapitany, Simon T. Powers, Eva Reindl, Claudio Tennie

Abstract: The goal of Artificial Life research, as articulated by Chris Langton, is "to contribute to theoretical biology by locating life-as-we-know-it within the larger picture of life-as-it-could-be" (1989, p.1). The study and pursuit of open-ended evolution in artificial evolutionary systems exemplifies this goal. However, open-ended evolution research is hampered by two fundamental issues; the struggle… ▽ More The goal of Artificial Life research, as articulated by Chris Langton, is "to contribute to theoretical biology by locating life-as-we-know-it within the larger picture of life-as-it-could-be" (1989, p.1). The study and pursuit of open-ended evolution in artificial evolutionary systems exemplifies this goal. However, open-ended evolution research is hampered by two fundamental issues; the struggle to replicate open-endedness in an artificial evolutionary system, and the fact that we only have one system (genetic evolution) from which to draw inspiration. Here we argue that cultural evolution should be seen not only as another real-world example of an open-ended evolutionary system, but that the unique qualities seen in cultural evolution provide us with a new perspective from which we can assess the fundamental properties of, and ask new questions about, open-ended evolutionary systems, especially in regard to evolved open-endedness and transitions from bounded to unbounded evolution. Here we provide an overview of culture as an evolutionary system, highlight the interesting case of human cultural evolution as an open-ended evolutionary system, and contextualise cultural evolution under the framework of (evolved) open-ended evolution. We go on to provide a set of new questions that can be asked once we consider cultural evolution within the framework of open-ended evolution, and introduce new insights that we may be able to gain about evolved open-endedness as a result of asking these questions. △ Less

Submitted 19 September, 2022; v1 submitted 24 March, 2022; originally announced March 2022.

Comments: 26 pages, 1 figure, 1 table, submitted to Artificial Life journal (special issue on Open-Ended Evolution)

Plasma Processing for In-Situ Field Emission Mitigation of Superconducting Radiofrequency (SRF) Cryomodules

Authors: M. Martinello, P. Berrutti, B. Giaccone, S. Belomestnykh, M. Checchin, G. V. Eremeev, A. Grassellino, T. Khabibouilline, A. Netepenko, R. Pilipenko, A. Romanenko, S. Posen, G. Wu, D. Gonnella, M. Ross, J. T. Maniscalco, T. Powers

Abstract: Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with t… ▽ More Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with the beam, damage or activate the beamline. One practical method that can be used to mitigate this problem is in-situ plasma cleaning, or plasma processing. The development of a processing that can be applied in-situ is extremely advantageous, since it enables the recovery of the cryomodule performance without the need of disassembling the whole cryomodule, which is an extremely expensive and time-consuming process. On the other hand, plasma processing only requires the cryomodule warm-up to room-temperature and the subsequent processing of the contaminated cavities. The entire process is reasonably quick and involves a limited number of personnel. For these reasons we would like to advocate for continuing to invest in the R\&D of plasma processing to optimize its applicability in cryomodules and for extending the technique to other frequency ranges and cavities geometries. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Controlling the shape and topology of two-component colloidal membranes

Authors: Ayantika Khanra, Leroy L. Jia, Noah P. Mitchell, Andrew Balchunas, Robert A. Pelcovits, Thomas R. Powers, Zvonimir Dogic, Prerna Sharma

Abstract: Changes in the geometry and topology of self-assembled membranes underlie diverse processes across cellular biology and engineering. Similar to lipid bilayers, monolayer colloidal membranes have in-plane fluid-like dynamics and out-of-plane bending elasticity. Their open edges and micron length scale provide a tractable system to study the equilibrium energetics and dynamic pathways of membrane as… ▽ More Changes in the geometry and topology of self-assembled membranes underlie diverse processes across cellular biology and engineering. Similar to lipid bilayers, monolayer colloidal membranes have in-plane fluid-like dynamics and out-of-plane bending elasticity. Their open edges and micron length scale provide a tractable system to study the equilibrium energetics and dynamic pathways of membrane assembly and reconfiguration. Here, we find that do** colloidal membranes with short miscible rods transforms disk-shaped membranes into saddle-shaped surfaces with complex edge structures. The saddle-shaped membranes are well-approximated by Enneper's minimal surfaces. Theoretical modeling demonstrates that their formation is driven by increasing positive Gaussian modulus, which in turn is controlled by the fraction of short rods. Further coalescence of saddle-shaped surfaces leads to diverse topologically distinct structures, including catenoids, tri-noids, four-noids, and higher order structures. At long time scales, we observe the formation of a system-spanning, sponge-like phase. The unique features of colloidal membranes reveal the topological transformations that accompany coalescence pathways in real time. We enhance the functionality of these membranes by making their shape responsive to external stimuli. Our results demonstrate a novel pathway towards control of thin elastic sheets' shape and topology -- a pathway driven by the emergent elasticity induced by compositional heterogeneity. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 15 pages, 9 figures

Journal ref: Proc. Natl. Acad. Sci., USA (2022) 119(32) e2204453119

Axisymmetric membranes with edges under external force: buckling, minimal surfaces, and tethers

Authors: Leroy L. Jia, Steven Pei, Robert A. Pelcovits, Thomas R. Powers

Abstract: We use theory and numerical computation to determine the shape of an axisymmetric fluid membrane with a resistance to bending and constant area. The membrane connects two rings in the classic geometry that produces a catenoidal shape in a soap film. In our problem, we find infinitely many branches of solutions for the shape and external force as functions of the separation of the rings, analogous… ▽ More We use theory and numerical computation to determine the shape of an axisymmetric fluid membrane with a resistance to bending and constant area. The membrane connects two rings in the classic geometry that produces a catenoidal shape in a soap film. In our problem, we find infinitely many branches of solutions for the shape and external force as functions of the separation of the rings, analogous to the infinite family of eigenmodes for the Euler buckling of a slender rod. Special attention is paid to the catenoid, which emerges as the shape of maximal allowable separation when the area is less than a critical area equal to the planar area enclosed by the two rings. A perturbation theory argument directly relates the tension of catenoidal membranes to the stability of catenoidal soap films in this regime. When the membrane area is larger than the critical area, we find additional cylindrical tether solutions to the shape equations at large ring separation, and that arbitrarily large ring separations are possible. These results apply for the case of vanishing Gaussian curvature modulus; when the Gaussian curvature modulus is nonzero and the area is below the critical area, the force and the membrane tension diverge as the ring separation approaches its maximum value. We also examine the stability of our shapes and analytically show that catenoidal membranes have markedly different stability properties than their soap film counterparts. △ Less

Submitted 2 June, 2021; originally announced June 2021.

Journal ref: Soft Matter, 2021,17, 7268-7286

Deformation and orientational order of chiral membranes with free edges

Authors: Lijie Ding, Robert A. Pelcovits, Thomas R. Powers

Abstract: Motivated by experiments on colloidal membranes composed of chiral rod-like viruses, we use Monte Carlo methods to determine the phase diagram for the liquid crystalline order of the rods and the membrane shape. We generalize the Lebwohl-Lasher model for a nematic with a chiral coupling to a curved surface with edge tension and a resistance to bending, and include an energy cost for tilting of the… ▽ More Motivated by experiments on colloidal membranes composed of chiral rod-like viruses, we use Monte Carlo methods to determine the phase diagram for the liquid crystalline order of the rods and the membrane shape. We generalize the Lebwohl-Lasher model for a nematic with a chiral coupling to a curved surface with edge tension and a resistance to bending, and include an energy cost for tilting of the rods relative to the local membrane normal. The membrane is represented by a triangular mesh of hard beads joined by bonds, where each bead is decorated by a director. The beads can move, the bonds can reconnect and the directors can rotate at each Monte Carlo step. When the cost of tilt is small, the membrane tends to be flat, with the rods only twisting near the edge for low chiral coupling, and remaining parallel to the normal in the interior of the membrane. At high chiral coupling, the rods twist everywhere, forming a cholesteric state. When the cost of tilt is large, the emergence of the cholesteric state at high values of the chiral coupling is accompanied by the bending of the membrane into a saddle shape. Increasing the edge tension tends to flatten the membrane. These results illustrate the geometric frustration arising from the inability of a surface normal to have twist. △ Less

Submitted 28 April, 2021; originally announced April 2021.

Comments: 8 pages, 9 figures

An Overview of Agent-based Traffic Simulators

Authors: Johannes Nguyen, Simon T. Powers, Neil Urquhart, Thomas Farrenkopf, Michael Guckert

Abstract: Individual traffic significantly contributes to climate change and environmental degradation. Therefore, innovation in sustainable mobility is gaining importance as it helps to reduce environmental pollution. However, effects of new ideas in mobility are difficult to estimate in advance and strongly depend on the individual traffic participants. The application of agent technology is particularly… ▽ More Individual traffic significantly contributes to climate change and environmental degradation. Therefore, innovation in sustainable mobility is gaining importance as it helps to reduce environmental pollution. However, effects of new ideas in mobility are difficult to estimate in advance and strongly depend on the individual traffic participants. The application of agent technology is particularly promising as it focuses on modelling heterogeneous individual preferences and behaviours. In this paper, we show how agent-based models are particularly suitable to address three pressing research topics in mobility: 1. Social dilemmas in resource utilisation; 2. Digital connectivity; and 3. New forms of mobility. We then explain how the features of several agent-based simulators are suitable for addressing these topics. We assess the capability of simulators to model individual travel behaviour, discussing implemented features and identifying gaps in functionality that we consider important. △ Less

Submitted 13 November, 2021; v1 submitted 15 February, 2021; originally announced February 2021.

Comments: The final publication is available at Elsevier Transportation Research Interdisciplinary Perspectives via https://doi.org/10.1016/j.trip.2021.100486

Toward a Rational and Ethical Sociotechnical System of Autonomous Vehicles: A Novel Application of Multi-Criteria Decision Analysis

Authors: Veljko Dubljević, George F. List, Jovan Milojevich, Nirav Ajmeri, William Bauer, Munindar P. Singh, Eleni Bardaka, Thomas Birkland, Charles Edwards, Roger Mayer, Ioan Muntean, Thomas Powers, Hesham Rakha, Vance Ricks, M. Shoaib Samandar

Abstract: The expansion of artificial intelligence (AI) and autonomous systems has shown the potential to generate enormous social good while also raising serious ethical and safety concerns. AI technology is increasingly adopted in transportation. A survey of various in-vehicle technologies found that approximately 64% of the respondents used a smartphone application to assist with their travel. The top-us… ▽ More The expansion of artificial intelligence (AI) and autonomous systems has shown the potential to generate enormous social good while also raising serious ethical and safety concerns. AI technology is increasingly adopted in transportation. A survey of various in-vehicle technologies found that approximately 64% of the respondents used a smartphone application to assist with their travel. The top-used applications were navigation and real-time traffic information systems. Among those who used smartphones during their commutes, the top-used applications were navigation and entertainment. There is a pressing need to address relevant social concerns to allow for the development of systems of intelligent agents that are informed and cognizant of ethical standards. Doing so will facilitate the responsible integration of these systems in society. To this end, we have applied Multi-Criteria Decision Analysis (MCDA) to develop a formal Multi-Attribute Impact Assessment (MAIA) questionnaire for examining the social and ethical issues associated with the uptake of AI. We have focused on the domain of autonomous vehicles (AVs) because of their imminent expansion. However, AVs could serve as a stand-in for any domain where intelligent, autonomous agents interact with humans, either on an individual level (e.g., pedestrians, passengers) or a societal level. △ Less

Submitted 4 February, 2021; originally announced February 2021.

Taylor dispersion of elongated rods

Authors: Ajay Harishankar Kumar, Stuart J. Thomson, Thomas R. Powers, Daniel M. Harris

Abstract: Particles transported in fluid flows, such as cells, polymers, or nanorods, are rarely spherical. In this study, we numerically and theoretically investigate the dispersion of an initially localized patch of passive elongated Brownian particles constrained to one degree of rotational freedom in a two-dimensional Poiseuille flow, demonstrating that elongated particles exhibit an enhanced longitudin… ▽ More Particles transported in fluid flows, such as cells, polymers, or nanorods, are rarely spherical. In this study, we numerically and theoretically investigate the dispersion of an initially localized patch of passive elongated Brownian particles constrained to one degree of rotational freedom in a two-dimensional Poiseuille flow, demonstrating that elongated particles exhibit an enhanced longitudinal dispersion. In a shear flow, the rods translate due to advection and diffusion and rotate due to rotational diffusion and their classical Jeffery's orbit. The magnitude of the enhanced dispersion depends on the particle's aspect ratio and the relative importance of its shear-induced rotational advection and rotational diffusivity. When rotational diffusion dominates, we recover the classical Taylor dispersion result for the longitudinal spreading rate using an orientationally averaged translational diffusivity for the rods. However, in the high-shear limit, the rods tend to align with the flow and ultimately disperse more due to their anisotropic diffusivities. Results from our Monte Carlo simulations of the particle dispersion are captured remarkably well by a simple theory inspired by Taylor's original work. For long times and large Peclet numbers, an effective one-dimensional transport equation is derived with integral expressions for the particles' longitudinal transport speed and dispersion coefficient. The enhanced dispersion coefficient can be collapsed along a single curve for particles of high aspect ratio, representing a simple correction factor that extends Taylor's original prediction to elongated particles. △ Less

Submitted 13 September, 2021; v1 submitted 9 November, 2020; originally announced November 2020.

Comments: 18 pages, 12 figures

Journal ref: Phys. Rev. Fluids 6, 094501 (2021)

Demonstration of electron cooling using a pulsed beam from an electrostatic electron cooler

Authors: M. W. Bruker, S. Benson, A. Hutton, K. Jordan, T. Powers, R. Rimmer, T. Satogata, A. Sy, H. Wang, S. Wang, H. Zhang, Y. Zhang, F. Ma, J. Li, X. M. Ma, L. J. Mao, X. P. Sha, M. T. Tang, J. C. Yang, X. D. Yang, H. Zhao, H. W. Zhao

Abstract: Cooling of hadron beams is critically important in the next generation of hadron storage rings for delivery of unprecedented performance. One such application is the electron-ion collider presently under development in the US. The desire to develop electron coolers for operation at much higher energies than previously achieved necessitates the use of radio-frequency (RF) fields for acceleration as… ▽ More Cooling of hadron beams is critically important in the next generation of hadron storage rings for delivery of unprecedented performance. One such application is the electron-ion collider presently under development in the US. The desire to develop electron coolers for operation at much higher energies than previously achieved necessitates the use of radio-frequency (RF) fields for acceleration as opposed to the conventional, electrostatic approach. While electron cooling is a mature technology at low energy utilizing a DC beam, RF acceleration requires the cooling beam to be bunched, thus extending the parameter space to an unexplored territory. It is important to experimentally demonstrate the feasibility of cooling with electron bunches and further investigate how the relative time structure of the two beams affects the cooling properties; thus, a set of four pulsed-beam cooling experiments was carried out by a collaboration of Jefferson Lab and Institute of Modern Physics (IMP). The experiments have successfully demonstrated cooling with a beam of electron bunches in both the longitudinal and transverse directions for the first time. We have measured the effect of the electron bunch length and longitudinal ion focusing strength on the temporal evolution of the longitudinal and transverse ion beam profile and demonstrate that if the synchronization can be accurately maintained, the dynamics are not adversely affected by the change in time structure. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Comments: 13 pages, 19 figures. Submitted to Physical Review Accelerators and Beams

When to (or not to) trust intelligent machines: Insights from an evolutionary game theory analysis of trust in repeated games

Authors: The Anh Han, Cedric Perret, Simon T. Powers

Abstract: The actions of intelligent agents, such as chatbots, recommender systems, and virtual assistants are typically not fully transparent to the user. Consequently, using such an agent involves the user exposing themselves to the risk that the agent may act in a way opposed to the user's goals. It is often argued that people use trust as a cognitive shortcut to reduce the complexity of such interaction… ▽ More The actions of intelligent agents, such as chatbots, recommender systems, and virtual assistants are typically not fully transparent to the user. Consequently, using such an agent involves the user exposing themselves to the risk that the agent may act in a way opposed to the user's goals. It is often argued that people use trust as a cognitive shortcut to reduce the complexity of such interactions. Here we formalise this by using the methods of evolutionary game theory to study the viability of trust-based strategies in repeated games. These are reciprocal strategies that cooperate as long as the other player is observed to be cooperating. Unlike classic reciprocal strategies, once mutual cooperation has been observed for a threshold number of rounds they stop checking their co-player's behaviour every round, and instead only check with some probability. By doing so, they reduce the opportunity cost of verifying whether the action of their co-player was actually cooperative. We demonstrate that these trust-based strategies can outcompete strategies that are always conditional, such as Tit-for-Tat, when the opportunity cost is non-negligible. We argue that this cost is likely to be greater when the interaction is between people and intelligent agents, because of the reduced transparency of the agent. Consequently, we expect people to use trust-based strategies more frequently in interactions with intelligent agents. Our results provide new, important insights into the design of mechanisms for facilitating interactions between humans and intelligent agents, where trust is an essential factor. △ Less

Submitted 22 July, 2020; originally announced July 2020.

A mechanism to promote social behaviour in household load balancing

Authors: Nathan A. Brooks, Simon T. Powers, James M. Borg

Abstract: Reducing the peak energy consumption of households is essential for the effective use of renewable energy sources, in order to ensure that as much household demand as possible can be met by renewable sources. This entails spreading out the use of high-powered appliances such as dishwashers and washing machines throughout the day. Traditional approaches to this problem have relied on differential p… ▽ More Reducing the peak energy consumption of households is essential for the effective use of renewable energy sources, in order to ensure that as much household demand as possible can be met by renewable sources. This entails spreading out the use of high-powered appliances such as dishwashers and washing machines throughout the day. Traditional approaches to this problem have relied on differential pricing set by a centralised utility company. But this mechanism has not been effective in promoting widespread shifting of appliance usage. Here we consider an alternative decentralised mechanism, where agents receive an initial allocation of time-slots to use their appliances and can then exchange these with other agents. If agents are willing to be more flexible in the exchanges they accept, then overall satisfaction, in terms of the percentage of agents time-slot preferences that are satisfied, will increase. This requires a mechanism that can incentivise agents to be more flexible. Building on previous work, we show that a mechanism incorporating social capital - the tracking of favours given and received - can incentivise agents to act flexibly and give favours by accepting exchanges that do not immediately benefit them. We demonstrate that a mechanism that tracks favours increases the overall satisfaction of agents, and crucially allows social agents that give favours to outcompete selfish agents that do not under payoff-biased social learning. Thus, even completely self-interested agents are expected to learn to produce socially beneficial outcomes. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Comments: 8 pages, 5 figures

Journal ref: ALIFE 2020: The 2020 Conference on Artificial Life, Special session: Artificial Life and Society, pp. 95-103

Superconducting radio-frequency cavity fault classification using machine learning at Jefferson Laboratory

Authors: Chris Tennant, Adam Carpenter, Tom Powers, Anna Shabalina Solopova, Lasitha Vidyaratne, Khan Iftekharuddin

Abstract: We report on the development of machine learning models for classifying C100 superconducting radio-frequency (SRF) cavity faults in the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. CEBAF is a continuous-wave recirculating linac utilizing 418 SRF cavities to accelerate electrons up to 12 GeV through 5-passes. Of these, 96 cavities (12 cryomodules) are designed with a digi… ▽ More We report on the development of machine learning models for classifying C100 superconducting radio-frequency (SRF) cavity faults in the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. CEBAF is a continuous-wave recirculating linac utilizing 418 SRF cavities to accelerate electrons up to 12 GeV through 5-passes. Of these, 96 cavities (12 cryomodules) are designed with a digital low-level RF system configured such that a cavity fault triggers waveform recordings of 17 RF signals for each of the 8 cavities in the cryomodule. Subject matter experts (SME) are able to analyze the collected time-series data and identify which of the eight cavities faulted first and classify the type of fault. This information is used to find trends and strategically deploy mitigations to problematic cryomodules. However manually labeling the data is laborious and time-consuming. By leveraging machine learning, near real-time (rather than post-mortem) identification of the offending cavity and classification of the fault type has been implemented. We discuss performance of the ML models during a recent physics run. Results show the cavity identification and fault classification models have accuracies of 84.9% and 78.2%, respectively. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 20 pages, 10 figures submitted to Physical Review Accelerators and Beams

Swimming of microorganisms in quasi-2D membranes

Authors: Carlos Alas, Thomas R. Powers, Tatiana Kuriabova

Abstract: Biological swimmers frequently navigate in geometrically restricted media. We study the prescribed-stroke problem of swimmers confined to a planar viscous membrane embedded in a bulk fluid of different viscosity. In their motion, microscopic swimmers disturb the fluid in both the membrane and the bulk. The flows that emerge have a combination of two-dimensional (2D) and three-dimensional (3D) hydr… ▽ More Biological swimmers frequently navigate in geometrically restricted media. We study the prescribed-stroke problem of swimmers confined to a planar viscous membrane embedded in a bulk fluid of different viscosity. In their motion, microscopic swimmers disturb the fluid in both the membrane and the bulk. The flows that emerge have a combination of two-dimensional (2D) and three-dimensional (3D) hydrodynamic features, and such flows are referred to as quasi-2D. The cross-over from 2D to 3D hydrodynamics in a quasi-2D fluid is controlled by the Saffman length, a length scale given by the ratio of the 2D membrane viscosity to the 3D viscosity of the embedding bulk fluid. We have developed a computational and theoretical approach based on the boundary element method and the Lorentz reciprocal theorem to study the swimming of microorganisms for a range of values of the Saffman length. We found that a flagellum propagating transverse sinusoidal waves in a quasi-2D membrane can develop a swimming speed exceeding that in pure 2D or 3D fluids, while the propulsion of a two-dimensional squirmer is slowed down by the presence of the bulk fluid. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Comments: 23 pages, 10 figures

Shapes of fluid membranes with chiral edges

Authors: Lijie Ding, Robert A. Pelcovits, Thomas R. Powers

Abstract: We carry out Monte Carlo simulations of a colloidal fluid membrane composed of chiral rod-like viruses. The membrane is modeled by a triangular mesh of beads connected by bonds in which the bonds and beads are free to move at each Monte Carlo step. Since the constituent viruses are experimentally observed to twist only near the membrane edge, we use an effective energy that favors a particular sig… ▽ More We carry out Monte Carlo simulations of a colloidal fluid membrane composed of chiral rod-like viruses. The membrane is modeled by a triangular mesh of beads connected by bonds in which the bonds and beads are free to move at each Monte Carlo step. Since the constituent viruses are experimentally observed to twist only near the membrane edge, we use an effective energy that favors a particular sign of the geodesic torsion of the edge. The effective energy also includes membrane bending stiffness, edge bending stiffness, and edge tension. We find three classes of membrane shapes resulting from the competition of the various terms in the free energy: branched shapes, chiral disks, and vesicles. Increasing the edge bending stiffness smooths the membrane edge, leading to correlations among the membrane normal at different points along the edge. We also consider membrane shapes under an external force by fixing the distance between two ends of the membrane, and find the shape for increasing values of the distance between the two ends. As the distance increases, the membrane twists into a ribbon, with the force eventually reaching a plateau. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. E 102, 032608 (2020)

Status in flux: Unequal alliances can create power vacuums

Authors: John Bryden, Eric Silverman, Simon T. Powers

Abstract: Human groups show a variety of leadership structures from no leader, to changing leaders, to a single long-term leader. When a leader is deposed, the presence of a power vacuum can mean they are often quickly replaced. We lack an explanation of how such phenomena can emerge from simple rules of interaction between individuals. Here, we model transitions between different phases of leadership struc… ▽ More Human groups show a variety of leadership structures from no leader, to changing leaders, to a single long-term leader. When a leader is deposed, the presence of a power vacuum can mean they are often quickly replaced. We lack an explanation of how such phenomena can emerge from simple rules of interaction between individuals. Here, we model transitions between different phases of leadership structure. We find a novel class of group dynamical behaviour where there is a single leader who is quickly replaced when they lose status, demonstrating a power vacuum. The model uses a dynamic network of individuals who non-coercively form and break alliances with one-another, with a key parameter modelling inequality in these alliances. We argue the model can explain transitions in leadership structure in the Neolithic Era from relatively equal hunter-gatherer societies, to groups with chieftains which change over time, to groups with an institutionalised leader on a paternal lineage. Our model demonstrates how these transitions can be explained by the impact of technological developments such as food storage and/or weapons, which meant that alliances became more unequal. In general terms, our approach provides a quantitative understanding of how technology and social norms can affect leadership dynamics and structures. △ Less

Submitted 24 October, 2019; v1 submitted 4 September, 2019; originally announced September 2019.

Topological structure and dynamics of three dimensional active nematics

Authors: Guillaume Duclos, Raymond Adkins, Debarghya Banerjee, Matthew S. E. Peterson, Minu Varghese, Itamar Kolvin, Arvind Baskaran, Robert A. Pelcovits, Thomas R. Powers, Aparna Baskaran, Federico Toschi, Michael F. Hagan, Sebastian J. Streichan, Vincenzo Vitelli, Daniel A. Beller, Zvonimir Dogic

Abstract: Point-like motile topological defects control the universal dynamics of diverse two-dimensional active nematics ranging from shaken granular rods to cellular monolayers. A comparable understanding in higher dimensions has yet to emerge. We report the creation of three-dimensional active nematics by dispersing extensile microtubule bundles in a passive colloidal liquid crystal. Light-sheet microsco… ▽ More Point-like motile topological defects control the universal dynamics of diverse two-dimensional active nematics ranging from shaken granular rods to cellular monolayers. A comparable understanding in higher dimensions has yet to emerge. We report the creation of three-dimensional active nematics by dispersing extensile microtubule bundles in a passive colloidal liquid crystal. Light-sheet microscopy reveals the millimeter-scale structure of active nematics with a single bundle resolution and the temporal evolution of the associated nematic director field. The dominant excitations of three-dimensional active nematics are extended charge-neutral disclination loops that undergo complex dynamics and recombination events. These studies introduce a new class of non-equilibrium systems whose turbulent-like dynamics arises from the interplay between internally generated active stresses, the chaotic flows and the topological structure of the constituent defects. △ Less

Submitted 3 September, 2019; originally announced September 2019.

Comments: 13 pages, 5 figures, plus Supplementary Information of 12 pages, 4 figures

Being a leader or being the leader: The evolution of institutionalised hierarchy

Authors: Cedric Perret, Emma Hart, Simon T. Powers

Abstract: Human social hierarchy has the unique characteristic of existing in two forms. Firstly, as an informal hierarchy where leaders and followers are implicitly defined by their personal characteristics, and secondly, as an institutional hierarchy where leaders and followers are explicitly appointed by group decision. Although both forms can reduce the time spent in organising collective tasks, institu… ▽ More Human social hierarchy has the unique characteristic of existing in two forms. Firstly, as an informal hierarchy where leaders and followers are implicitly defined by their personal characteristics, and secondly, as an institutional hierarchy where leaders and followers are explicitly appointed by group decision. Although both forms can reduce the time spent in organising collective tasks, institutional hierarchy imposes additional costs. It is therefore natural to question why it emerges at all. The key difference lies in the fact that institutions can create hierarchy with only a single leader, which is unlikely to occur in unregulated informal hierarchy. To investigate if this difference can affect group decision-making and explain the evolution of institutional hierarchy, we first build an opinion-formation model that simulates group decision making. We show that in comparison to informal hierarchy, a single-leader hierarchy reduces (i) the time a group spends to reach consensus, (ii) the variation in consensus time, and (iii) the rate of increase in consensus time as group size increases. We then use this model to simulate the cost of organising a collective action which produces resources, and integrate this into an evolutionary model where individuals can choose between informal or institutional hierarchy. Our results demonstrate that groups evolve preferences towards institutional hierarchy, despite the cost of creating an institution, as it provides a greater organisational advantage which is less affected by group size and inequality. △ Less

Submitted 3 July, 2019; originally announced July 2019.

Comments: To be published in the Proceedings of the Artificial Life Conference 2019 (ALIFE 2019), MIT Press

Force induced formation of twisted chiral ribbons

Authors: Andrew Balchunas, Leroy L. Jia, Mark Zakhary, Zvonimir Dogic, Robert A. Pelcovits, Thomas R. Powers

Abstract: We study the emergence of helical structures subjected to a stretching force, demonstrating that the force transforms disk-shaped colloidal membranes into twisted chiral ribbons of predetermined handedness. Using an experimental technique that enforces torque-free boundary conditions we simultaneously measure the force-extension curve and quantify the shape of emergent ribbons. An effective theory… ▽ More We study the emergence of helical structures subjected to a stretching force, demonstrating that the force transforms disk-shaped colloidal membranes into twisted chiral ribbons of predetermined handedness. Using an experimental technique that enforces torque-free boundary conditions we simultaneously measure the force-extension curve and quantify the shape of emergent ribbons. An effective theory that accounts for the membrane bending energy and uses geometric properties of the edge to model the internal liquid crystalline degrees of freedom explains both the measured force-extension curve and shape of the twisted ribbons in response to an applied force. △ Less

Submitted 17 April, 2019; originally announced April 2019.

Comments: 6 pages, 4 figures. Supplementary material: 3 videos

Journal ref: Phys. Rev. Lett. 125, 018002 (2020)

Stability of the interface of an isotropic active fluid

Authors: Harsh Soni, Wan Luo, Robert A. Pelcovits, Thomas Powers

Abstract: We study the linear stability of an isotropic active fluid in three different geometries: a film of active fluid on a rigid substrate, a cylindrical thread of fluid, and a spherical fluid droplet. The active fluid is modeled by the hydrodynamic theory of an active nematic liquid crystal in the isotropic phase. In each geometry, we calculate the growth rate of sinusoidal modes of deformation of the… ▽ More We study the linear stability of an isotropic active fluid in three different geometries: a film of active fluid on a rigid substrate, a cylindrical thread of fluid, and a spherical fluid droplet. The active fluid is modeled by the hydrodynamic theory of an active nematic liquid crystal in the isotropic phase. In each geometry, we calculate the growth rate of sinusoidal modes of deformation of the interface. There are two distinct branches of growth rates; at long wavelength, one corresponds to the deformation of the interface, and one corresponds to the evolution of the liquid crystalline degrees of freedom. The passive cases of the film and the spherical droplet are always stable. For these geometries, a sufficiently large activity leads to instability. Activity also leads to propagating damped or growing modes. The passive cylindrical thread is unstable for perturbations with wavelength longer than the circumference. A sufficiently large activity can make any wavelength unstable, and again leads to propagating damped or growing modes. △ Less

Submitted 2 April, 2019; originally announced April 2019.

Comments: 12 pages, 12 figures

Journal ref: Soft Matter, (2019)

Differentiable Greedy Networks

Authors: Thomas Powers, Rasool Fakoor, Siamak Shakeri, Abhinav Sethy, Amanjit Kainth, Abdel-rahman Mohamed, Ruhi Sarikaya

Abstract: Optimal selection of a subset of items from a given set is a hard problem that requires combinatorial optimization. In this paper, we propose a subset selection algorithm that is trainable with gradient-based methods yet achieves near-optimal performance via submodular optimization. We focus on the task of identifying a relevant set of sentences for claim verification in the context of the FEVER t… ▽ More Optimal selection of a subset of items from a given set is a hard problem that requires combinatorial optimization. In this paper, we propose a subset selection algorithm that is trainable with gradient-based methods yet achieves near-optimal performance via submodular optimization. We focus on the task of identifying a relevant set of sentences for claim verification in the context of the FEVER task. Conventional methods for this task look at sentences on their individual merit and thus do not optimize the informativeness of sentences as a set. We show that our proposed method which builds on the idea of unfolding a greedy algorithm into a computational graph allows both interpretability and gradient-based training. The proposed differentiable greedy network (DGN) outperforms discrete optimization algorithms as well as other baseline methods in terms of precision and recall. △ Less

Submitted 29 October, 2018; originally announced October 2018.

Comments: Work in progress and under review

Classification of q-pure q-weight maps over finite dimensional Hilbert spaces

Authors: Christopher Jankowski, Daniel Markiewicz, Robert T. Powers

Abstract: An $E_0$-semigroup of $B(H)$ is a one parameter strongly continuous semigroup of $*$-endomorphisms of $B(H)$ that preserve the identity. Every $E_0$-semigroup that possesses a strongly continuous intertwining semigroup of isometries is cocycle conjugate to an $E_0$-semigroup induced by the Bhat induction of a $CP$-flow over a separable Hilbert space $K$. We say an $E_0$-semigroup $α$ is $q$-pure i… ▽ More An $E_0$-semigroup of $B(H)$ is a one parameter strongly continuous semigroup of $*$-endomorphisms of $B(H)$ that preserve the identity. Every $E_0$-semigroup that possesses a strongly continuous intertwining semigroup of isometries is cocycle conjugate to an $E_0$-semigroup induced by the Bhat induction of a $CP$-flow over a separable Hilbert space $K$. We say an $E_0$-semigroup $α$ is $q$-pure if the $CP$-subordinates $β$ of norm one (i.e. $\Vertβ_t(I)\Vert = 1$ and $α_t-β_t$ is completely positive for all $t \geq 0$) are totally ordered in the sense that if $β$ and $γ$ are two $CP$-subordinates of $α$ of norm one, then $β\geq γ$ or $γ\geq β$. This paper shows how to construct and classify all $q$-pure $E_0$-semigroups induced by $CP$-flows over a finite-dimensional Hilbert space $K$ up to cocycle conjugacy. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: 66 pages

MSC Class: 46L55; 46L57

Enhancement of microorganism swimming speed in active matter

Authors: Harsh Soni, Robert A. Pelcovits, Thomas R. Powers

Abstract: We study a swimming undulating sheet in the isotropic phase of an active nematic liquid crystal. Activity changes the effective shear viscosity, reducing it to zero at a critical value of activity. Expanding in the sheet amplitude, we find that the correction to the swimming speed due to activity is inversely proportional to the effective shear viscosity. Our perturbative calculation becomes inval… ▽ More We study a swimming undulating sheet in the isotropic phase of an active nematic liquid crystal. Activity changes the effective shear viscosity, reducing it to zero at a critical value of activity. Expanding in the sheet amplitude, we find that the correction to the swimming speed due to activity is inversely proportional to the effective shear viscosity. Our perturbative calculation becomes invalid near the critical value of activity; using numerical methods to probe this regime, we find that activity enhances the swimming speed by an order of magnitude compared to the passive case. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 121, 178002 (2018)

Can justice be fair when it is blind? How social network structures can promote or prevent the evolution of despotism

Authors: Cedric Perret, Simon T. Powers, Jeremy Pitt, Emma Hart

Abstract: Hierarchy is an efficient way for a group to organize, but often goes along with inequality that benefits leaders. To control despotic behaviour, followers can assess leaders decisions by aggregating their own and their neighbours experience, and in response challenge despotic leaders. But in hierarchical social networks, this interactional justice can be limited by (i) the high influence of a sma… ▽ More Hierarchy is an efficient way for a group to organize, but often goes along with inequality that benefits leaders. To control despotic behaviour, followers can assess leaders decisions by aggregating their own and their neighbours experience, and in response challenge despotic leaders. But in hierarchical social networks, this interactional justice can be limited by (i) the high influence of a small clique who are treated better, and (ii) the low connectedness of followers. Here we study how the connectedness of a social network affects the co-evolution of despotism in leaders and tolerance to despotism in followers. We simulate the evolution of a population of agents, where the influence of an agent is its number of social links. Whether a leader remains in power is controlled by the overall satisfaction of group members, as determined by their joint assessment of the leaders behaviour. We demonstrate that centralization of a social network around a highly influential clique greatly increases the level of despotism. This is because the clique is more satisfied, and their higher influence spreads their positive opinion of the leader throughout the network. Finally, our results suggest that increasing the connectedness of followers limits despotism while maintaining hierarchy. △ Less

Submitted 28 June, 2018; originally announced June 2018.

Comments: To appear in Proceedings of the Artificial Life Conference 2018 (ALIFE 2018), MIT Press

Design and Vertical Tests of SPS-series Double-Quarter Wave (DQW) Cavity Prototypes for the HL-LHC Crab Cavity System

Authors: S. Verdú-Andrés, K. Artoos, S. Belomestnykh, I. Ben-Zvi, C. Boulware, G. Burt, R. Calaga, O. Capatina, F. Carra, A. Castilla, W. Clemens, T. Grimm, N. Kuder, R. Leuxe, Z. Li, E. A. McEwen, H. Park, T. Powers, A. Ratti, N. Shipman, J. Skaritka, Q. Wu, B. P. Xiao, J. Yancey, C. Zanoni

Abstract: Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is p… ▽ More Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is provided by its fundamental mode. Each HL-LHC DQW cavity shall provide a nominal deflecting voltage of 3.4 MV, although up to 5.0 MV may be required. A Proof-of-Principle (PoP) DQW cavity was limited by quench at 4.6 MV. This paper describes a new, highly optimized cavity, designated DQW SPS-series, which satisfies dimensional, cryogenic, manufacturing and impedance requirements for beam tests at SPS and operation in LHC. Two prototypes of this DQW SPS-series were fabricated by US industry and cold tested after following conventional SRF surface treatment. Both units outperformed the PoP cavity, reaching a deflecting voltage of 5.3-5.9 MV. This voltage - the highest reached by a DQW cavity - is well beyond the nominal voltage of 3.4 MV and may even operate at the ultimate voltage of 5.0MVwith sufficient margin. This paper covers fabrication, surface preparation and cryogenic RF test results and implications. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. Accel. Beams 21, 082002 (2018)

Deep Recurrent NMF for Speech Separation by Unfolding Iterative Thresholding

Authors: Scott Wisdom, Thomas Powers, James Pitton, Les Atlas

Abstract: In this paper, we propose a novel recurrent neural network architecture for speech separation. This architecture is constructed by unfolding the iterations of a sequential iterative soft-thresholding algorithm (ISTA) that solves the optimization problem for sparse nonnegative matrix factorization (NMF) of spectrograms. We name this network architecture deep recurrent NMF (DR-NMF). The proposed DR-… ▽ More In this paper, we propose a novel recurrent neural network architecture for speech separation. This architecture is constructed by unfolding the iterations of a sequential iterative soft-thresholding algorithm (ISTA) that solves the optimization problem for sparse nonnegative matrix factorization (NMF) of spectrograms. We name this network architecture deep recurrent NMF (DR-NMF). The proposed DR-NMF network has three distinct advantages. First, DR-NMF provides better interpretability than other deep architectures, since the weights correspond to NMF model parameters, even after training. This interpretability also provides principled initializations that enable faster training and convergence to better solutions compared to conventional random initialization. Second, like many deep networks, DR-NMF is an order of magnitude faster at test time than NMF, since computation of the network output only requires evaluating a few layers at each time step. Third, when a limited amount of training data is available, DR-NMF exhibits stronger generalization and separation performance compared to sparse NMF and state-of-the-art long-short term memory (LSTM) networks. When a large amount of training data is available, DR-NMF achieves lower yet competitive separation performance compared to LSTM networks. △ Less

Submitted 20 September, 2017; originally announced September 2017.

Comments: To be presented at WASPAA 2017

Chiral edge fluctuations of colloidal membranes

Authors: Leroy L. Jia, Mark J. Zakhary, Zvonimir Dogic, Robert A. Pelcovits, Thomas R. Powers

Abstract: We study edge fluctuations of a flat colloidal membrane comprised of a monolayer of aligned filamentous viruses. Experiments reveal that a peak in the spectrum of the in-plane edge fluctuations arises for sufficiently strong virus chirality. Accounting for internal liquid crystalline degrees of freedom by the length, curvature, and geodesic torsion of the edge, we calculate the spectrum of the edg… ▽ More We study edge fluctuations of a flat colloidal membrane comprised of a monolayer of aligned filamentous viruses. Experiments reveal that a peak in the spectrum of the in-plane edge fluctuations arises for sufficiently strong virus chirality. Accounting for internal liquid crystalline degrees of freedom by the length, curvature, and geodesic torsion of the edge, we calculate the spectrum of the edge fluctuations. The theory quantitatively describes the experimental data, demonstrating that chirality couples in-plane and out-of-plane edge fluctuations to produce the peak. △ Less

Submitted 9 December, 2016; originally announced December 2016.

Comments: Main text: 4 pages, 2 figures. Supplementary materials: 3 videos

Journal ref: Phys. Rev. E 95, 060701 (2017)

Interpretable Recurrent Neural Networks Using Sequential Sparse Recovery

Authors: Scott Wisdom, Thomas Powers, James Pitton, Les Atlas

Abstract: Recurrent neural networks (RNNs) are powerful and effective for processing sequential data. However, RNNs are usually considered "black box" models whose internal structure and learned parameters are not interpretable. In this paper, we propose an interpretable RNN based on the sequential iterative soft-thresholding algorithm (SISTA) for solving the sequential sparse recovery problem, which models… ▽ More Recurrent neural networks (RNNs) are powerful and effective for processing sequential data. However, RNNs are usually considered "black box" models whose internal structure and learned parameters are not interpretable. In this paper, we propose an interpretable RNN based on the sequential iterative soft-thresholding algorithm (SISTA) for solving the sequential sparse recovery problem, which models a sequence of correlated observations with a sequence of sparse latent vectors. The architecture of the resulting SISTA-RNN is implicitly defined by the computational structure of SISTA, which results in a novel stacked RNN architecture. Furthermore, the weights of the SISTA-RNN are perfectly interpretable as the parameters of a principled statistical model, which in this case include a sparsifying dictionary, iterative step size, and regularization parameters. In addition, on a particular sequential compressive sensing task, the SISTA-RNN trains faster and achieves better performance than conventional state-of-the-art black box RNNs, including long-short term memory (LSTM) RNNs. △ Less

Submitted 22 November, 2016; originally announced November 2016.

Comments: Presented at NIPS 2016 Workshop on Interpretable Machine Learning in Complex Systems

Full-Capacity Unitary Recurrent Neural Networks

Authors: Scott Wisdom, Thomas Powers, John R. Hershey, Jonathan Le Roux, Les Atlas

Abstract: Recurrent neural networks are powerful models for processing sequential data, but they are generally plagued by vanishing and exploding gradient problems. Unitary recurrent neural networks (uRNNs), which use unitary recurrence matrices, have recently been proposed as a means to avoid these issues. However, in previous experiments, the recurrence matrices were restricted to be a product of paramete… ▽ More Recurrent neural networks are powerful models for processing sequential data, but they are generally plagued by vanishing and exploding gradient problems. Unitary recurrent neural networks (uRNNs), which use unitary recurrence matrices, have recently been proposed as a means to avoid these issues. However, in previous experiments, the recurrence matrices were restricted to be a product of parameterized unitary matrices, and an open question remains: when does such a parameterization fail to represent all unitary matrices, and how does this restricted representational capacity limit what can be learned? To address this question, we propose full-capacity uRNNs that optimize their recurrence matrix over all unitary matrices, leading to significantly improved performance over uRNNs that use a restricted-capacity recurrence matrix. Our contribution consists of two main components. First, we provide a theoretical argument to determine if a unitary parameterization has restricted capacity. Using this argument, we show that a recently proposed unitary parameterization has restricted capacity for hidden state dimension greater than 7. Second, we show how a complete, full-capacity unitary recurrence matrix can be optimized over the differentiable manifold of unitary matrices. The resulting multiplicative gradient step is very simple and does not require gradient clip** or learning rate adaptation. We confirm the utility of our claims by empirically evaluating our new full-capacity uRNNs on both synthetic and natural data, achieving superior performance compared to both LSTMs and the original restricted-capacity uRNNs. △ Less

Submitted 31 October, 2016; originally announced November 2016.

Comments: 9 pages, to appear in NIPS

Achiral symmetry breaking and positive Gaussian modulus lead to scalloped colloidal membranes

Authors: Thomas Gibaud, C. Nadir Kaplan, Prerna Sharma, Andrew Ward, Mark J. Zakhary, Rudolf Oldenbourg, Robert B. Meyer, Randall D. Kamien, Thomas R. Powers, Zvonimir Dogic

Abstract: In the presence of a non-adsorbing polymer, monodisperse rod-like particles assemble into colloidal membranes, which are one rod-length thick liquid-like monolayers of aligned rods. Unlike 3D edgeless bilayer vesicles, colloidal monolayer membranes form open structures with an exposed edge, thus presenting an opportunity to study physics of thin elastic sheets. Membranes assembled from single-comp… ▽ More In the presence of a non-adsorbing polymer, monodisperse rod-like particles assemble into colloidal membranes, which are one rod-length thick liquid-like monolayers of aligned rods. Unlike 3D edgeless bilayer vesicles, colloidal monolayer membranes form open structures with an exposed edge, thus presenting an opportunity to study physics of thin elastic sheets. Membranes assembled from single-component chiral rods form flat disks with uniform edge twist. In comparison, membranes comprised of mixture of rods with opposite chiralities can have the edge twist of either handedness. In this limit disk-shaped membranes become unstable, instead forming structures with scalloped edges, where two adjacent lobes with opposite handedness are separated by a cusp-shaped point defect. Such membranes adopt a 3D configuration, with cusp defects alternatively located above and below the membrane plane. In the achiral regime the cusp defects have repulsive interactions, but away from this limit we measure effective long-ranged attractive binding. A phenomenological model shows that the increase in the edge energy of scalloped membranes is compensated by concomitant decrease in the deformation energy due to Gaussian curvature associated with scalloped edges, demonstrating that colloidal membranes have positive Gaussian modulus. A simple excluded volume argument predicts the sign and magnitude of the Gaussian curvature modulus that is in agreement with experimental measurements. Our results provide insight into how the interplay between membrane elasticity, geometrical frustration and achiral symmetry breaking can be used to fold colloidal membranes into 3D shapes. △ Less

Submitted 7 November, 2016; v1 submitted 20 October, 2016; originally announced October 2016.

Comments: Main text: 25 pages, 6 figures. Supplementary information: 6 pages, 6 figures

Wrinkling of a thin film on a nematic liquid crystal elastomer

Authors: Harsh Soni, Robert A. Pelcovits, Thomas R. Powers

Abstract: Wrinkles commonly develop in a thin film deposited on a soft elastomer substrate when the film is subject to compression. Motivated by recent experiments [Agrawal et al., Soft Matter 8, 7138 (2012)] that show how wrinkle morphology can be controlled by using a nematic elastomer substrate, we develop the theory of small-amplitude wrinkles of an isotropic film atop a nematic elastomer. The directors… ▽ More Wrinkles commonly develop in a thin film deposited on a soft elastomer substrate when the film is subject to compression. Motivated by recent experiments [Agrawal et al., Soft Matter 8, 7138 (2012)] that show how wrinkle morphology can be controlled by using a nematic elastomer substrate, we develop the theory of small-amplitude wrinkles of an isotropic film atop a nematic elastomer. The directors of the nematic elastomer are assumed to lie in a plane parallel to the plane of the undeformed film. For uniaxial compression of the film along the direction perpendicular to the elastomer directors, the system behaves as a compressed film on an isotropic substrate. When the uniaxial compression is along the direction of nematic order, we find that the soft elasticity characteristic of liquid crystal elastomers leads to a critical stress for wrinkling which is very small compared to the case of an isotropic substrate. We also determine the wavelength of the wrinkles at the critical stress, and show how the critical stress and wavelength depend on substrate depth and the anisotropy of the polymer chains in the nematic elastomer. △ Less

Submitted 30 April, 2016; originally announced May 2016.

Journal ref: Phys. Rev. E 94, 012701 (2016)

Study on transient beam loading compensation for China ADS proton linac injector II

Authors: Zheng Gao, Yuan He, Xian-Wu Wang, Wei Chang, Rui-Feng Zhang, Zheng-Long Zhu, Sheng-Hu Zhang, Qi Chen, Tom Powers

Abstract: Significant transient beam loading effects were observed during beam commissioning tests of prototype II of the injector for the Accelerator Driven Sub-critical (ADS) system, which took place at the Institute of Modern Physics, Chinese Academy of Sciences, between October and December 2014. During these tests experiments were performed with CW operation of the cavities with pulsed beam current, an… ▽ More Significant transient beam loading effects were observed during beam commissioning tests of prototype II of the injector for the Accelerator Driven Sub-critical (ADS) system, which took place at the Institute of Modern Physics, Chinese Academy of Sciences, between October and December 2014. During these tests experiments were performed with CW operation of the cavities with pulsed beam current, and the system was configured to make use of a prototype digital low level radio frequency (LLRF) controller. The system was originally operated in pulsed mode with a simple PID feedback control algorithm, which was not able to maintain the desired gradient regulation during pulsed 10 mA beam operations. A unique simple transient beam loading compensation method which made use of a combination of PI feedback and feedforward control algorithm was implemented in order to significantly reduce the beam induced transient effect in the cavity gradients. The superconducting cavity field variation was reduced to less than 1.7% after turning on this control algorithm. The design and experimental results of this system are presented in this paper. △ Less

Submitted 25 January, 2016; originally announced January 2016.

Enhancement and Recognition of Reverberant and Noisy Speech by Extending Its Coherence

Authors: Scott Wisdom, Thomas Powers, Les Atlas, James Pitton

Abstract: Most speech enhancement algorithms make use of the short-time Fourier transform (STFT), which is a simple and flexible time-frequency decomposition that estimates the short-time spectrum of a signal. However, the duration of short STFT frames are inherently limited by the nonstationarity of speech signals. The main contribution of this paper is a demonstration of speech enhancement and automatic s… ▽ More Most speech enhancement algorithms make use of the short-time Fourier transform (STFT), which is a simple and flexible time-frequency decomposition that estimates the short-time spectrum of a signal. However, the duration of short STFT frames are inherently limited by the nonstationarity of speech signals. The main contribution of this paper is a demonstration of speech enhancement and automatic speech recognition in the presence of reverberation and noise by extending the length of analysis windows. We accomplish this extension by performing enhancement in the short-time fan-chirp transform (STFChT) domain, an overcomplete time-frequency representation that is coherent with speech signals over longer analysis window durations than the STFT. This extended coherence is gained by using a linear model of fundamental frequency variation of voiced speech signals. Our approach centers around using a single-channel minimum mean-square error log-spectral amplitude (MMSE-LSA) estimator proposed by Habets, which scales coefficients in a time-frequency domain to suppress noise and reverberation. In the case of multiple microphones, we preprocess the data with either a minimum variance distortionless response (MVDR) beamformer, or a delay-and-sum beamformer (DSB). We evaluate our algorithm on both speech enhancement and recognition tasks for the REVERB challenge dataset. Compared to the same processing done in the STFT domain, our approach achieves significant improvement in terms of objective enhancement metrics (including PESQ---the ITU-T standard measurement for speech quality). In terms of automatic speech recognition (ASR) performance as measured by word error rate (WER), our experiments indicate that the STFT with a long window is more effective for ASR. △ Less

Submitted 1 September, 2015; originally announced September 2015.

Comments: 22 pages

Microscale locomotion in a nematic liquid crystal

Authors: Madison S. Krieger, Saverio E. Spagnolie, Thomas R. Powers

Abstract: Microorganisms often encounter anisotropy, for example in mucus and biofilms. We study how anisotropy and elasticity of the ambient fluid affects the speed of a swimming microorganism with a prescribed stroke. Motivated by recent experiments on swimming bacteria in anisotropic environments, we extend a classical model for swimming microorganisms, the Taylor swimming sheet, actuated either by trans… ▽ More Microorganisms often encounter anisotropy, for example in mucus and biofilms. We study how anisotropy and elasticity of the ambient fluid affects the speed of a swimming microorganism with a prescribed stroke. Motivated by recent experiments on swimming bacteria in anisotropic environments, we extend a classical model for swimming microorganisms, the Taylor swimming sheet, actuated either by transverse or longitudinal traveling waves in a three-dimensional nematic liquid crystal without twist. We calculate the swimming speed and entrained volumetric flux as a function of the swimmer's stroke properties as well as the elastic and rheological properties of the liquid crystal. The behavior is quantitatively and qualitatively well-approximated by a hexatic liquid crystal except in the cases of small Ericksen number and in a nematic fluid with tumbling parameter near the transition to a flow-aligning nematic, where anisotropic effects dominate. We also propose a novel method of swimming or pum** in a nematic fluid by passing a traveling wave of director oscillation along a rigid wall. △ Less

Submitted 18 September, 2015; v1 submitted 2 July, 2015; originally announced July 2015.

What can ecosystems learn? Expanding evolutionary ecology with learning theory

Authors: Daniel A. Power, Richard A. Watson, Eörs Szathmáry, Rob Mills, Simon T Powers, C Patrick Doncaster, Błażej Czapp

Abstract: Understanding how the structure of community interactions is modified by coevolution is vital for understanding system responses to change at all scales. However, in absence of a group selection process, collective community behaviours cannot be organised or adapted in a Darwinian sense. An open question thus persists: are there alternative organising principles that enable us to understand how co… ▽ More Understanding how the structure of community interactions is modified by coevolution is vital for understanding system responses to change at all scales. However, in absence of a group selection process, collective community behaviours cannot be organised or adapted in a Darwinian sense. An open question thus persists: are there alternative organising principles that enable us to understand how coevolution of component species creates complex collective behaviours exhibited at the community level? We address this issue using principles from connectionist learning, a discipline with well-developed theories of emergent behaviours in simple networks. We identify conditions where selection on ecological interactions is equivalent to 'unsupervised learning' (a simple type of connectionist learning) and observe that this enables communities to self organize without community-level selection. Despite not being a Darwinian unit, ecological communities can behave like connectionist learning systems, creating internal organisation that habituates to past environmental conditions and actively recalling those conditions. △ Less

Submitted 21 June, 2015; originally announced June 2015.

Comments: 37 pages 11 figures

Minimal model for transient swimming in a liquid crystal

Authors: Madison S. Krieger, Marcelo A. Dias, Thomas R. Powers

Abstract: When a microorganism begins swimming from rest in a Newtonian fluid such as water, it rapidly attains its steady-state swimming speed since changes in the velocity field spread quickly when the Reynolds number is small. However, swimming microorganisms are commonly found or studied in complex fluids. Because these fluids have long relaxation times, the time to attain the steady- state swimming spe… ▽ More When a microorganism begins swimming from rest in a Newtonian fluid such as water, it rapidly attains its steady-state swimming speed since changes in the velocity field spread quickly when the Reynolds number is small. However, swimming microorganisms are commonly found or studied in complex fluids. Because these fluids have long relaxation times, the time to attain the steady- state swimming speed can also be long. In this article we study the swimming startup problem in the simplest liquid crystalline fluid: a two-dimensional hexatic liquid crystal film. We study the dependence of startup time on anchoring strength and Ericksen number, which is the ratio of viscous to elastic stresses. For strong anchoring, the fluid flow starts up immediately but the liquid crystal field and swimming velocity attain their sinusoidal steady-state values after a time proportional to the relaxation time of the liquid crystal. When the Ericksen number is high, the behavior is the same as in the strong anchoring case for any anchoring strength. We also find that the startup time increases with the ratio of the rotational viscosity to the shear viscosity, and then ultimately saturates once the rotational viscosity is much greater than the shear viscosity. △ Less

Submitted 4 June, 2015; originally announced June 2015.

Locomotion and transport in a hexatic liquid crystal

Authors: Madison S. Krieger, Saverio E. Spagnolie, Thomas R. Powers

Abstract: The swimming behavior of bacteria and other microorganisms is sensitive to the physical properties of the fluid in which they swim. Mucus, biofilms, and artificial liquid-crystalline solutions are all examples of fluids with some degree of anisotropy that are also commonly encountered by bacteria. In this article, we study how liquid-crystalline order affects the swimming behavior of a model swimm… ▽ More The swimming behavior of bacteria and other microorganisms is sensitive to the physical properties of the fluid in which they swim. Mucus, biofilms, and artificial liquid-crystalline solutions are all examples of fluids with some degree of anisotropy that are also commonly encountered by bacteria. In this article, we study how liquid-crystalline order affects the swimming behavior of a model swimmer. The swimmer is a one-dimensional version of G. I. Taylor's swimming sheet: an infinite line undulating with small-amplitude transverse or longitudinal traveling waves. The fluid is a two-dimensional hexatic liquid-crystalline film. We calculate the power dissipated, swimming speed, and flux of fluid entrained as a function of the swimmer's waveform as well as properties of the hexatic film, such as the rotational and shear viscosity, the Frank elastic constant, and the anchoring strength. The departure from isotropic behavior is greatest for large rotational viscosity and weak anchoring boundary conditions on the orientational order at the swimmer surface. We even find that if the rotational viscosity is large enough, the transverse-wave swimmer moves in the opposite direction relative to a swimmer in an isotropic fluid. △ Less

Submitted 8 July, 2014; originally announced July 2014.

Journal ref: Phys. Rev. E., 90, 052503 (2014)

Mutual diffusion of inclusions in freely-suspended smectic liquid crystal films

Authors: Zhiyuan Qi, Zoom Hoang Nguyen, Cheol Soo Park, Matthew A. Glaser, Joseph E. Maclennan, Noel A. Clark, Tatiana Kuriabova, Thomas R. Powers

Abstract: We study experimentally and theoretically the hydrodynamic interaction of pairs of circular inclusions in two-dimensional, fluid smectic membranes suspended in air. By analyzing their Brownian motion, we find that the radial mutual mobilities of identical inclusions are independent of their size but that the angular coupling becomes strongly size-dependent when their radius exceeds a characteristi… ▽ More We study experimentally and theoretically the hydrodynamic interaction of pairs of circular inclusions in two-dimensional, fluid smectic membranes suspended in air. By analyzing their Brownian motion, we find that the radial mutual mobilities of identical inclusions are independent of their size but that the angular coupling becomes strongly size-dependent when their radius exceeds a characteristic hydrodynamic length. The observed dependence of the mutual mobilities on inclusion size is described well for arbitrary separations by a model that generalizes the Levine/MacKintosh theory of point-force response functions and uses a boundary-element approach to calculate the mobility matrix. △ Less

Submitted 9 January, 2014; originally announced January 2014.

Journal ref: Phys. Rev. Lett. 113, 128304 (2014)

Propulsion by a Helical Flagellum in a Capillary Tube

Authors: Bin Liu, Kenneth S. Breuer, Thomas R. Powers

Abstract: We study the microscale propulsion of a rotating helical filament confined by a cylindrical tube, using a boundary-element method for Stokes flow that accounts for helical symmetry. We determine the effect of confinement on swimming speed and power consumption. Except for a small range of tube radii at the tightest confinements, the swimming speed at fixed rotation rate increases monotonically as… ▽ More We study the microscale propulsion of a rotating helical filament confined by a cylindrical tube, using a boundary-element method for Stokes flow that accounts for helical symmetry. We determine the effect of confinement on swimming speed and power consumption. Except for a small range of tube radii at the tightest confinements, the swimming speed at fixed rotation rate increases monotonically as the confinement becomes tighter. At fixed torque, the swimming speed and power consumption depend only on the geometry of the filament centerline, except at the smallest pitch angles for which the filament thickness plays a role. We find that the `normal' geometry of \textit{Escherichia coli} flagella is optimized for swimming efficiency, independent of the degree of confinement. The efficiency peaks when the arc length of the helix within a pitch matches the circumference of the cylindrical wall. We also show that a swimming helix in a tube induces a net flow of fluid along the tube. △ Less

Submitted 22 October, 2013; originally announced October 2013.

Comments: 13 pages, 5 figures

Journal ref: Phys. Fluids 26, 011701 (2014)

Swimming near Deformable Membranes at Low Reynolds Number

Authors: Marcelo A. Dias, Thomas R. Powers

Abstract: Microorganisms are rarely found in Nature swimming freely in an unbounded fluid. Instead, they typically encounter other organisms, hard walls, or deformable boundaries such as free interfaces or membranes. Hydrodynamic interactions between the swimmer and nearby objects lead to many interesting phenomena, such as changes in swimming speed, tendencies to accumulate or turn, and coordinated flagell… ▽ More Microorganisms are rarely found in Nature swimming freely in an unbounded fluid. Instead, they typically encounter other organisms, hard walls, or deformable boundaries such as free interfaces or membranes. Hydrodynamic interactions between the swimmer and nearby objects lead to many interesting phenomena, such as changes in swimming speed, tendencies to accumulate or turn, and coordinated flagellar beating. Inspired by this class of problems, we investigate locomotion of microorganisms near deformable boundaries. We calculate the speed of an infinitely long swimmer close to a flexible surface separating two fluids; we also calculate the deformation and swimming speed of the flexible surface. When the viscosities on either side of the flexible interface differ, we find that fluid is pumped along or against the swimming direction, depending on which viscosity is greater. △ Less

Submitted 18 October, 2013; v1 submitted 28 September, 2013; originally announced September 2013.

Journal ref: Phys. Fluids 25, 101901 (2013)