-
Principal Component Analysis in Application to Brillouin Microscopy Data
Authors:
Hadi Mahmodi,
Christopher G. Poulton,
Mathew N. Lesley,
Glenn Oldham,
Hui Xin Ong,
Steven J. Langford,
Irina V. Kabakova
Abstract:
Brillouin microscopy has recently emerged as a new bio-imaging modality that provides information on the micromechanical properties of biological materials, cells and tissues. The data collected in a typical Brillouin microscopy experiment represents the high-dimensional set of spectral information. Its analysis requires non-trivial approaches due to subtlety in spectral variations as well as spat…
▽ More
Brillouin microscopy has recently emerged as a new bio-imaging modality that provides information on the micromechanical properties of biological materials, cells and tissues. The data collected in a typical Brillouin microscopy experiment represents the high-dimensional set of spectral information. Its analysis requires non-trivial approaches due to subtlety in spectral variations as well as spatial and spectral overlaps of measured features. This article offers a guide to the application of Principal Component Analysis (PCA) for processing Brillouin imaging data. Being unsupervised multivariate analysis, PCA is well-suited to tackle processing of complex Brillouin spectra from heterogeneous biological samples with minimal a priori information requirements. We point out the importance of data pre-processing steps in order to improve outcomes of PCA. We also present a strategy where PCA combined with k-means clustering method can provide a working solution to data reconstruction and deeper insights into sample composition, structure and mechanics.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Brillouin light storage for 100 pulse widths
Authors:
Birgit Stiller,
Kevin Jaksch,
Johannes Piotrowski,
Moritz Merklein,
Mikolaj K. Schmidt,
Khu Vu,
Pan Ma,
Stephen Madden,
Michael J. Steel,
Christopher G. Poulton,
Benjamin J. Eggleton
Abstract:
Signal processing based on stimulated Brillouin scattering (SBS) is limited by the narrow linewidth of the optoacoustic response, which confines many Brillouin applications to continuous wave signals or optical pulses longer than several nanoseconds. In this work, we experimentally demonstrate Brillouin interactions at the 150 ps time scale and a delay for a record 15 ns which corresponds to a del…
▽ More
Signal processing based on stimulated Brillouin scattering (SBS) is limited by the narrow linewidth of the optoacoustic response, which confines many Brillouin applications to continuous wave signals or optical pulses longer than several nanoseconds. In this work, we experimentally demonstrate Brillouin interactions at the 150 ps time scale and a delay for a record 15 ns which corresponds to a delay of 100 pulse widths. This breakthrough experimental result was enabled by the high local gain of the chalcogenide waveguides as the optoacoustic interaction length reduces with pulse width. We successfully transfer 150ps-long pulses to traveling acoustic waves within a Brillouin-based memory setup. The information encoded in the optical pulses is stored for 15 ns in the acoustic field. We show the retrieval of eight amplitude levels, multiple consecutive pulses and low distortion in pulse shape. The extension of Brillouin-based storage to the ultra-short pulse regime is an important step for the realisation of practical Brillouin-based delay lines and other optical processing applications.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Optimizing performance for on-chip SBS-based isolator
Authors:
Choon Kong Lai,
Moritz Merklein,
Alvaro Casas Bedoya,
Yang Liu,
Stephen J. Madden,
Christopher G. Poulton,
Michael J. Steel,
Benjamin J. Eggleton
Abstract:
Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is cha…
▽ More
Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is challenging to fabricate and is potentially less robust than a non-suspended structure, thereby limiting the design flexibility. In this paper, we numerically investigate the performance of a Brillouin-based isolation scheme in which a dual-pump-driven optoacoustic interaction is used to excite confined acoustic waves in a traditional ridge waveguide. We find that acoustic confinement, and therefore the amount of Brillouin-driven mode conversion, can be enhanced by selecting an appropriate optical mode pair and waveguide geometry of two arsenic based chalcogenide platforms. Further, we optimize the isolator design in its entirety, including the input couplers, mode filters, the Brillouin-active waveguide as well as the device fabrication tolerances. We predict such a device can achieve 30 dB isolation over a 38 nm bandwidth when 500 mW pump power is used; in the presence of a +/- 10 nm fabrication-induced width error, such isolation can be maintained over a 5-10 nm bandwidth.
△ Less
Submitted 25 December, 2022;
originally announced December 2022.
-
Exploring extreme thermodynamics in nanoliter volumes through stimulated Brillouin-Mandelstam scattering
Authors:
Andreas Geilen,
Alexandra Popp,
Debayan Das,
Saher Junaid,
Christopher G. Poulton,
Mario Chemnitz,
Christoph Marquardt,
Markus A. Schmidt,
Birgit Stiller
Abstract:
Examining the physical properties of materials - particularly of toxic liquids - under a wide range of thermodynamic states is a challenging problem due to the extreme conditions the material has to be exposed to. Such temperature and pressure regimes, which result in a change of refractive index and sound velocity can be accessed by optoacoustic interactions such as Brillouin-Mandelstam scatterin…
▽ More
Examining the physical properties of materials - particularly of toxic liquids - under a wide range of thermodynamic states is a challenging problem due to the extreme conditions the material has to be exposed to. Such temperature and pressure regimes, which result in a change of refractive index and sound velocity can be accessed by optoacoustic interactions such as Brillouin-Mandelstam scattering. Here we experimentally demonstrate Brillouin-Mandelstam measurements of nanoliter volumes of liquids in extreme thermodynamic regimes. We use a fully-sealed liquid-core optical fiber containing carbon disulfide; within this waveguide, which exhibits tight optoacoustic confinement and a high Brillouin gain of (32.2 $\pm$ 0.8) 1/(Wm), we are able to conduct spatially resolved measurements of the Brillouin frequency shift. Knowledge of the local Brillouin response enables us to control the temperature and pressure independently over a wide range. We observe and measure the material properties of the liquid core at very large positive pressures (above 1000 bar), substantial negative pressures (below -300 bar) and we explore the isobaric and isochoric regimes. The extensive thermodynamic control allows the tunability of the Brillouin frequency shift of more than 40% using only minute volumes of liquid. This work opens the way for future studies of liquids under a variety of conventionally hard-to-reach conditions.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Noise in Brillouin Based Information Storage
Authors:
Oscar A. Nieves,
Matthew D. Arnold,
Mikołaj K. Schmidt,
Michael J. Steel,
Christopher G. Poulton
Abstract:
We theoretically and numerically study the efficiency of Brillouin-based opto-acoustic data storage in a photonic waveguide in the presence of thermal noise and laser phase noise. We compare the physics of the noise processes and how they affect different storage techniques, examining both amplitude and phase storage schemes. We investigate the effects of storage time and pulse properties on the q…
▽ More
We theoretically and numerically study the efficiency of Brillouin-based opto-acoustic data storage in a photonic waveguide in the presence of thermal noise and laser phase noise. We compare the physics of the noise processes and how they affect different storage techniques, examining both amplitude and phase storage schemes. We investigate the effects of storage time and pulse properties on the quality of the retrieved signal, and find that phase storage is less sensitive to thermal noise than amplitude storage.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Point Source Localization with a Planar Optical Phased Array Compressive Sensor
Authors:
Julian A. Brown,
Steven J. Spector,
Michael Moebius,
Lucas Benney,
Daniel Vresilovic,
Brian Dolle,
Alexandra Z. Greenbaum,
Alex Huang,
Christopher V. Poulton,
Michael R. Watts,
Robin Dawson,
Benjamin F. Lane,
J. P. Laine,
Kerri Cahoy,
Hannah A. Clevenson
Abstract:
Compressive sensing has been used to demonstrate scene reconstruction and source localization in a wide variety of devices. To date, optical compressive sensors have not been able to achieve significant volume reduction relative to conventional optics of equivalent angular resolution. Here, we adapt silicon-photonic optical phased array technology to demonstrate, to our knowledge, the first applic…
▽ More
Compressive sensing has been used to demonstrate scene reconstruction and source localization in a wide variety of devices. To date, optical compressive sensors have not been able to achieve significant volume reduction relative to conventional optics of equivalent angular resolution. Here, we adapt silicon-photonic optical phased array technology to demonstrate, to our knowledge, the first application of compressive imaging in a photonic-integrated device. Our novel sensor consists of an $8\times 8$ grid of grating couplers with a spacing of $100~μ$m. Path-matched waveguides route to a single multimode interferometer (MMI), which mixes and randomizes the signals into 64 outputs to be used for compressed sensing. Our device is fully passive, having no need for phase shifters, as measurement matrix calibration makes the measurements robust to phase errors. For testing, we use an Amplified Spontaneous Emission (ASE) source with a bandwidth of 40 nm, centered at 1545 nm. We demonstrate simultaneous multi-point (2 sources demonstrated in this work) brightness recovery and localization with better than 10 arcsecond precision in a sub-millimeter thick form-factor. We achieve a single source recovery rate higher than 99.9\% using 10 of the 64 outputs, and a 90\% recovery rate with only 6 outputs, 10 times fewer than the 64 needed for conventional imaging. This planar optical phased array compressive sensor is well-suited for imaging sparse scenes in applications constrained by form factor, volume, or high-cost detectors, with the potential to revolutionize endoscopy, beam locators, and LIDAR.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Numerical Simulation of Noise in Pulsed Brillouin Scattering
Authors:
Oscar A. Nieves,
Matthew D. Arnold,
Michael J. Steel,
Mikolaj K. Schmidt,
Christopher G. Poulton
Abstract:
We present a numerical method for modelling noise in Stimulated Brillouin Scattering (SBS). The model applies to dynamic cases such as optical pulses, and accounts for both thermal noise and phase noise from the input lasers. Using this model, we compute the statistical properties of the optical and acoustic power in the pulsed spontaneous and stimulated Brillouin cases, and investigate the effect…
▽ More
We present a numerical method for modelling noise in Stimulated Brillouin Scattering (SBS). The model applies to dynamic cases such as optical pulses, and accounts for both thermal noise and phase noise from the input lasers. Using this model, we compute the statistical properties of the optical and acoustic power in the pulsed spontaneous and stimulated Brillouin cases, and investigate the effects of gain and pulse width on noise levels. We find that thermal noise plays an important role in the statistical properties of the fields, and that laser phase noise impacts the SBS interaction when the laser coherence time is close to the time-scale of the optical pulses. This algorithm is applicable to arbitrary waveguide geometries and material properties, and thus presents a versatile way of performing noise-based SBS numerical simulations, which are important in signal processing, sensing, microwave photonics and opto-acoustic memory storage.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Picosecond acoustic dynamics in stimulated Brillouin scattering
Authors:
Johannes Piotrowski,
Mikołaj K. Schmidt,
Birgit Stiller,
Christopher G. Poulton,
Michael Steel
Abstract:
Recent experiments demonstrating storage of optical pulses in acoustic phonons based on stimulated Brillouin scattering raise a number of questions about the spectral and temporal capacities of such protocols and the limitations of the theoretical frameworks routinely used to describe them. In this work, we consider the dynamics of photon-phonon scattering induced by optical pulses with temporal w…
▽ More
Recent experiments demonstrating storage of optical pulses in acoustic phonons based on stimulated Brillouin scattering raise a number of questions about the spectral and temporal capacities of such protocols and the limitations of the theoretical frameworks routinely used to describe them. In this work, we consider the dynamics of photon-phonon scattering induced by optical pulses with temporal widths comparable to the period of acoustic oscillations. We revisit the widely adopted classical formalism of coupled modes and demonstrate its breakdown. We propose a simple extension to generalise the formulation and find potentially measurable consequences in the dynamics of Brillouin experiments involving ultra-short pulses.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Noise and Pulse Dynamics in Backward Stimulated Brillouin Scattering
Authors:
Oscar A. Nieves,
Matthew D. Arnold,
M. J. Steel,
Mikołaj K. Schmidt,
Christopher G. Poulton
Abstract:
We theoretically and numerically study the effects of thermal noise on pulses in backwards Stimulated Brillouin Scattering (SBS). Using a combination of stochastic calculus and numerical methods, we derive a theoretical model that can be used to quantitatively predict noise measurements. We study how the optical pulse configuration, including the input powers of the pump and Stokes fields, pulse d…
▽ More
We theoretically and numerically study the effects of thermal noise on pulses in backwards Stimulated Brillouin Scattering (SBS). Using a combination of stochastic calculus and numerical methods, we derive a theoretical model that can be used to quantitatively predict noise measurements. We study how the optical pulse configuration, including the input powers of the pump and Stokes fields, pulse durations and interaction time, affects the noise in the output Stokes field. We investigate the effects on the noise of the optical loss and waveguide length, and we find that the signal-to-noise ratio can be significantly improved, or reduced, for specific combinations of waveguide properties and pulse parameters.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Acoustic diamond resonators with ultra-small mode volumes
Authors:
Mikołaj K. Schmidt,
Christopher G. Poulton,
Michael J. Steel
Abstract:
Quantum acoustodynamics (QAD) is a rapidly develo** field of research, offering possibilities to realize and study macroscopic quantum-mechanical systems in a new range of frequencies, and implement transducers and new types of memories for hybrid quantum devices. Here we propose a novel design for a versatile diamond QAD cavity operating at GHz frequencies, exhibiting effective mode volumes of…
▽ More
Quantum acoustodynamics (QAD) is a rapidly develo** field of research, offering possibilities to realize and study macroscopic quantum-mechanical systems in a new range of frequencies, and implement transducers and new types of memories for hybrid quantum devices. Here we propose a novel design for a versatile diamond QAD cavity operating at GHz frequencies, exhibiting effective mode volumes of about $10^{-4}λ^3$. Our phononic crystal waveguide cavity implements a non-resonant analogue of the optical lightning-rod effect to localize the energy of an acoustic mode into a deeply-subwavelength volume. We demonstrate that this confinement can readily enhance the orbit-strain interaction with embedded nitrogen-vacancy (NV) centres towards the high-cooperativity regime, and enable efficient resonant cooling of the acoustic vibrations towards the ground state using a single NV. This architecture can be readily translated towards setup with multiple cavities in one- or two-dimensional phononic crystals, and the underlying non-resonant localization mechanism will pave the way to further enhance optoacoustic coupling in phoxonic crystal cavities.
△ Less
Submitted 19 May, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
ARRAW: Anti-resonant reflecting acoustic waveguides
Authors:
Mikołaj K. Schmidt,
Matthew C. O'Brien,
Michael J. Steel,
Christopher G. Poulton
Abstract:
Development of acoustic and optoacoustic on-chip technologies calls for new solutions to guiding, storing and interfacing acoustic and optical waves in integrated silicon-on-insulator (SOI) systems. One of the biggest challenges in this field is to suppress the radiative dissipation of the propagating acoustic waves, while co-localizing the optical and acoustic fields in the same region of an inte…
▽ More
Development of acoustic and optoacoustic on-chip technologies calls for new solutions to guiding, storing and interfacing acoustic and optical waves in integrated silicon-on-insulator (SOI) systems. One of the biggest challenges in this field is to suppress the radiative dissipation of the propagating acoustic waves, while co-localizing the optical and acoustic fields in the same region of an integrated waveguide. Here we address this problem by introducing Anti-Resonant Reflecting Acoustic Waveguides (ARRAWs) -- mechanical analogues of the Anti-Resonant Reflecting Optical Waveguides (ARROWs). We discuss the principles of anti-resonant guidance and establish guidelines for designing efficient ARRAWs. Finally, we demonstrate examples of the simplest silicon/silica ARRAW platforms that can simultaneously serve as near-IR optical waveguides, and support strong backward Brillouin scattering.
△ Less
Submitted 28 March, 2020; v1 submitted 4 September, 2019;
originally announced September 2019.
-
NumBAT: The integrated, open source Numerical Brillouin Analysis Tool
Authors:
Björn C. P. Sturmberg,
Kokou B. Dossou,
Michael J. A. Smith,
Blair Morrison,
Christopher G. Poulton,
Michael J. Steel
Abstract:
We describe NumBAT, an open-source software tool for modelling stimulated Brillouin scattering in waveguides of arbitrary cross-section. It provides rapid calculation of optical and elastic dispersion relations, field profiles and gain with an easy-to-use Python front end. Additionally, we provide an open and extensible set of standard problems and reference materials to facilitate the bench-marki…
▽ More
We describe NumBAT, an open-source software tool for modelling stimulated Brillouin scattering in waveguides of arbitrary cross-section. It provides rapid calculation of optical and elastic dispersion relations, field profiles and gain with an easy-to-use Python front end. Additionally, we provide an open and extensible set of standard problems and reference materials to facilitate the bench-marking of NumBAT against subsequent tools. Such a resource is needed to help settle discrepancies between existing formulations and implementations, and to facilitate comparison between results in the literature. The resulting standardised testing framework will allow the community to gain confidence in new algorithms and will provide a common tool for the comparison of experimental designs of opto-acoustic waveguides.
△ Less
Submitted 26 November, 2018;
originally announced November 2018.
-
Suspended mid-infrared waveguides for Stimulated Brillouin Scattering
Authors:
Mikołaj K. Schmidt,
Christopher G. Poulton,
Goran Z. Mashanovich,
Graham T. Reed,
Benjamin J. Eggleton,
M. J. Steel
Abstract:
We theoretically investigate a new class of silicon waveguides for achieving Stimulated Brillouin Scattering (SBS) in the mid-infrared (MIR). The waveguide consists of a rectangular core supporting a low-loss optical mode, suspended in air by a series of transverse ribs. The ribs are patterned to form a finite quasi-one-dimensional phononic crystal, with the complete stopband suppressing the trans…
▽ More
We theoretically investigate a new class of silicon waveguides for achieving Stimulated Brillouin Scattering (SBS) in the mid-infrared (MIR). The waveguide consists of a rectangular core supporting a low-loss optical mode, suspended in air by a series of transverse ribs. The ribs are patterned to form a finite quasi-one-dimensional phononic crystal, with the complete stopband suppressing the transverse leakage of acoustic waves, and confining them to the core of the waveguide. We derive a theoretical formalism that can be used to compute the opto-acoustic interaction in such periodic structures, and find forward intramodal-SBS gains up to $1750~\text{m}^{-1}\text{W}^{-1}$, which compares favorably with the proposed MIR SBS designs based on buried germanium waveguides. This large gain is achieved thanks to the nearly complete suppression of acoustic radiative losses.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Stimulated Brillouin Scattering in layered media: nanoscale enhancement of silicon
Authors:
M. J. A. Smith,
C. Wolff,
C. G. Poulton,
C. M. de Sterke
Abstract:
We report a theoretical study of Stimulated Brillouin Scattering (SBS) in general anisotropic media, incorporating the effects of both acoustic strain and local rotation in all calculations. We apply our general theoretical framework to compute the SBS gain for layered media with periodic length scales smaller than all optical and acoustic wavelengths, where such composites behave like homogeneous…
▽ More
We report a theoretical study of Stimulated Brillouin Scattering (SBS) in general anisotropic media, incorporating the effects of both acoustic strain and local rotation in all calculations. We apply our general theoretical framework to compute the SBS gain for layered media with periodic length scales smaller than all optical and acoustic wavelengths, where such composites behave like homogeneous anisotropic media. We theoretically predict that a layered medium comprising nanometre-thin layers of silicon and As$_2$S$_3$ glass possesses a bulk SBS gain of $1.28 \times 10^{-9} \, \mathrm{W}^{-1} \, \mathrm{m}$. This is more than 500 times larger than the gain coefficient of silicon, and substantially larger than the gain of As$_2$S$_3$. The enhancement is due to a combination of roto-optic, photoelastic, and artificial photoelastic contributions in the composite structure.
△ Less
Submitted 27 November, 2018; v1 submitted 21 September, 2018;
originally announced September 2018.
-
On-chip multi-stage optical delay based on cascaded Brillouin light storage
Authors:
Birgit Stiller,
Moritz Merklein,
Christian Wolff,
Khu Vu,
Pan Ma,
Christopher G. Poulton,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Storing and delaying optical signals plays a crucial role in data centers, phased array antennas, communication and future computing architectures. Here, we show a delay scheme based on cascaded Brillouin light storage, that achieves multi-stage delay at arbitrary positions within a photonic integrated circuit. Importantly these multiple resonant transfers between the optical and acoustic domain a…
▽ More
Storing and delaying optical signals plays a crucial role in data centers, phased array antennas, communication and future computing architectures. Here, we show a delay scheme based on cascaded Brillouin light storage, that achieves multi-stage delay at arbitrary positions within a photonic integrated circuit. Importantly these multiple resonant transfers between the optical and acoustic domain are controlled solely via external optical control pulses, allowing cascading of the delay without the need of aligning multiple structural resonances along the optical circuit.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
-
Crosstalk-free multi-wavelength coherent light storage via Brillouin interaction
Authors:
Birgit Stiller,
Moritz Merklein,
Khu Vu,
Pan Ma,
Stephen J. Madden,
Christopher G. Poulton,
Benjamin J. Eggleton
Abstract:
Stimulated Brillouin scattering drives a coherent interaction between optical signals and acoustic phonons and this effect can be used for storing optical information in acoustic waves. An important consideration arises when multiple optical frequencies are simultaneously employed in the Brillouin process: in this case the acoustic phonons that are addressed by each optical wavelength can be separ…
▽ More
Stimulated Brillouin scattering drives a coherent interaction between optical signals and acoustic phonons and this effect can be used for storing optical information in acoustic waves. An important consideration arises when multiple optical frequencies are simultaneously employed in the Brillouin process: in this case the acoustic phonons that are addressed by each optical wavelength can be separated by frequencies far smaller than the acoustic phonon linewidth, potentially leading to crosstalk between the optical modes. Here we extend the concept of Brillouin-based light storage to multiple wavelength channels. We experimentally and theoretically show that the accumulated phase mismatch over the length of the spatially extended phonons allows each optical wavelength channel to address a distinct phonon mode, ensuring negligible crosstalk, even if the phonons overlap in frequency. Moreover, we demonstrate that the strict phase matching condition enables the preservation of the coherence of the opto-acoustic transfer at closely spaced multiple acoustic frequencies. This particular phase-mismatch for broad-bandwidth pulses has far-reaching implications allowing dense wavelength multiplexing in Brillouin-based light storage, multi-frequency Brillouin sensing, multi-wavelength Brillouin lasers, parallel microwave processing and quantum photon-phonon interactions.
△ Less
Submitted 4 October, 2018; v1 submitted 22 March, 2018;
originally announced March 2018.
-
Elastic Purcell effect
Authors:
Mikołaj K. Schmidt,
L. G. Helt,
Christopher G. Poulton,
M. J. Steel
Abstract:
In this work, we introduce an elastic analog of the Purcell effect and show theoretically that spherical nanoparticles can serve as tunable and robust antennas for modifying the emission from localized elastic sources. This effect can be qualitatively described by introducing elastic counterparts of the familiar electromagnetic parameters: local density of elastic states, elastic Purcell factor, a…
▽ More
In this work, we introduce an elastic analog of the Purcell effect and show theoretically that spherical nanoparticles can serve as tunable and robust antennas for modifying the emission from localized elastic sources. This effect can be qualitatively described by introducing elastic counterparts of the familiar electromagnetic parameters: local density of elastic states, elastic Purcell factor, and effective volume of elastic modes. To illustrate our framework, we consider the example of a submicron gold sphere as a generic elastic GHz antenna and find that shear and mixed modes of low orders in such systems offer considerable elastic Purcell factors. This formalism opens pathways towards extended control over dissipation of vibrations in various optomechanical systems and contributes to closing the gap between classical and quantum-mechanical treatments of phonons localized in elastic nanoresonators.
△ Less
Submitted 18 July, 2018; v1 submitted 14 January, 2018;
originally announced February 2018.
-
Enhanced acousto-optic properties in layered media
Authors:
M. J. A. Smith,
C. Wolff,
M. Lapine,
C. G. Poulton,
C. Martijn de Sterke
Abstract:
We present a rigorous procedure for evaluating the photoelastic coefficients of a layered medium where the periodicity is smaller than the wavelengths of all optical and acoustic fields. Analytical expressions are given for the coefficients of a composite material comprising thin layers of optically isotropic materials. These coefficients include artificial contributions that are unique to structu…
▽ More
We present a rigorous procedure for evaluating the photoelastic coefficients of a layered medium where the periodicity is smaller than the wavelengths of all optical and acoustic fields. Analytical expressions are given for the coefficients of a composite material comprising thin layers of optically isotropic materials. These coefficients include artificial contributions that are unique to structured media and arise from the optical and mechanical contrast between the constituents. Using numerical examples, we demonstrate that the acousto-optic properties of layered structures can be enhanced beyond those of the constituent materials. Furthermore, we show that the acousto-optic response can be tuned as desired.
△ Less
Submitted 28 June, 2017; v1 submitted 6 February, 2017;
originally announced February 2017.
-
Stimulated Brillouin scattering enhancement in silicon inverse opal waveguides
Authors:
M. J. A. Smith,
C. Wolff,
C. Martijn de Sterke,
M. Lapine,
B. T. Kuhlmey,
C. G. Poulton
Abstract:
Silicon is an ideal material for on-chip applications, however its poor acoustic properties limit its performance for important optoacoustic applications, particularly for Stimulated Brillouin Scattering (SBS). We theoretically show that silicon inverse opals exhibit a strongly improved acoustic performance that enhances the bulk SBS gain coefficient by more than two orders of magnitude. We also d…
▽ More
Silicon is an ideal material for on-chip applications, however its poor acoustic properties limit its performance for important optoacoustic applications, particularly for Stimulated Brillouin Scattering (SBS). We theoretically show that silicon inverse opals exhibit a strongly improved acoustic performance that enhances the bulk SBS gain coefficient by more than two orders of magnitude. We also design a waveguide that incorporates silicon inverse opals and which has SBS gain values that are comparable with chalcogenide glass waveguides. This research opens new directions for opto-acoustic applications in on-chip material systems.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Cascaded forward Brillouin scattering to all Stokes orders
Authors:
Christian Wolff,
Birgit Stiller,
Benjamin. J. Eggleton,
Michael J. Steel,
Christopher G. Poulton
Abstract:
Inelastic scattering processes such as Brillouin scattering can often function in cascaded regimes and this is likely to occur in certain integrated opto-acoustic devices. We develop a Hamiltonian formalism for cascaded Brillouin scattering valid for both quantum and classical regimes. By regarding Brillouin scattering as the interaction of a single acoustic envelope and a single optical envelope…
▽ More
Inelastic scattering processes such as Brillouin scattering can often function in cascaded regimes and this is likely to occur in certain integrated opto-acoustic devices. We develop a Hamiltonian formalism for cascaded Brillouin scattering valid for both quantum and classical regimes. By regarding Brillouin scattering as the interaction of a single acoustic envelope and a single optical envelope that covers all Stokes and anti-Stokes orders, we obtain a compact model that is well suited for numerical implementation, extension to include other optical nonlinearities or short pulses, and application in the quantum-optics domain. We then theoretically analyze intra-mode forward Brillouin scattering (FBS) for arbitrary waveguides with and without optical dispersion. In the absence of optical dispersion, we find an exact analytical solution. With a perturbative approach, we furthermore solve the case of weak optical dispersion. Our work leads to several key results on intra-mode FBS. For negligible dispersion, we show that cascaded intra-mode FBS results in a pure phase modulation and discuss how this necessitates specific experimental methods for the observation of fibre-based and integrated FBS. Further, we discuss how the descriptions that have been established in these two classes of waveguides connect to each other and to the broader context of cavity opto-mechanics and Raman scattering. Finally, we draw an unexpected striking similarity between FBS and discrete diffraction phenomena in waveguide arrays, which makes FBS an interesting candidate for future research in quantum-optics.
△ Less
Submitted 25 August, 2016; v1 submitted 16 July, 2016;
originally announced July 2016.
-
Stimulated Brillouin scattering in metamaterials
Authors:
M. J. A. Smith,
B. T. Kuhlmey,
C. Martijn de Sterke,
C. Wolff,
M. Lapine,
C. G. Poulton
Abstract:
We compute the SBS gain for a metamaterial comprising a cubic lattice of dielectric spheres suspended in a background dielectric material. Theoretical methods are presented to calculate the optical, acoustic, and opto-acoustic parameters that describe the SBS properties of the material at long wavelengths. Using the electromagnetic and strain energy densities we accurately characterise the optical…
▽ More
We compute the SBS gain for a metamaterial comprising a cubic lattice of dielectric spheres suspended in a background dielectric material. Theoretical methods are presented to calculate the optical, acoustic, and opto-acoustic parameters that describe the SBS properties of the material at long wavelengths. Using the electromagnetic and strain energy densities we accurately characterise the optical and acoustic properties of the metamaterial. From a combination of energy density methods and perturbation theory, we recover the appropriate terms of the photoelastic tensor for the metamaterial. We demonstrate that electrostriction is not necessarily the dominant mechanism in the enhancement and suppression of the SBS gain coefficient in a metamaterial, and that other parameters, such as the Brillouin linewidth, can dominate instead. Examples are presented that exhibit an order of magnitude enhancement in the SBS gain as well as perfect suppression.
△ Less
Submitted 10 June, 2016;
originally announced June 2016.
-
Modal formulation for diffraction by absorbing photonic crystal slabs
Authors:
Kokou B. Dossou,
Lindsay C. Botten,
Ara A. Asatryan,
Björn C. P. Sturmberg,
Michael A. Byrne,
Christopher G. Poulton,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
A finite element-based modal formulation of diffraction of a plane wave by an absorbing photonic crystal slab of arbitrary geometry is developed for photovoltaic applications. The semi-analytic approach allows efficient and accurate calculation of the absorption of an array with a complex unit cell. This approach gives direct physical insight into the absorption mechanism in such structures, which…
▽ More
A finite element-based modal formulation of diffraction of a plane wave by an absorbing photonic crystal slab of arbitrary geometry is developed for photovoltaic applications. The semi-analytic approach allows efficient and accurate calculation of the absorption of an array with a complex unit cell. This approach gives direct physical insight into the absorption mechanism in such structures, which can be used to enhance the absorption. The verification and validation of this approach is applied to a silicon nanowire array and the efficiency and accuracy of the method is demonstrated. The method is ideally suited to studying the manner in which spectral properties (e.g., absorption) vary with the thickness of the array, and we demonstrate this with efficient calculations which can identify an optimal geometry.
△ Less
Submitted 23 November, 2015;
originally announced June 2016.
-
Electric Field-Induced Second Order Nonlinear Optical Effects in Silicon Waveguides
Authors:
E. Timurdogan,
Christopher V. Poulton,
M. R. Watts
Abstract:
The demand for nonlinear effects within a silicon platform to support photonic circuits requiring phase-only modulation, frequency doubling, and/or difference frequency generation, is becoming increasingly clear. However, the symmetry of the silicon crystal inhibits second order optical nonlinear susceptibility, $χ^{(2)}$. Here, we show that the crystalline symmetry is broken when a DC field is pr…
▽ More
The demand for nonlinear effects within a silicon platform to support photonic circuits requiring phase-only modulation, frequency doubling, and/or difference frequency generation, is becoming increasingly clear. However, the symmetry of the silicon crystal inhibits second order optical nonlinear susceptibility, $χ^{(2)}$. Here, we show that the crystalline symmetry is broken when a DC field is present, inducing a $χ^{(2)}$ in a silicon waveguide that is proportional to the large $χ^{(3)}$ of silicon. First, Mach-Zehnder interferometers using the DC Kerr effect optical phase shifters in silicon ridge waveguides with p-i-n junctions are demonstrated with a $V_πL$ of $2.4Vcm$ in telecom bands $(λ_ω=1.58μm)$ without requiring to dope the silicon core. Second, the pump and second harmonic modes in silicon ridge waveguides are quasi-phase matched when the magnitude, spatial distribution of the DC field and $χ^{(2)}$ are controlled with p-i-n junctions. Using these waveguides, second harmonic generation at multiple pump wavelengths are observed with a maximum efficiency of $P_{2ω}/P_ω^2$=12%/W at $λ_ω=2.29μm$ in a 1mm long waveguide. This corresponds to a field-induced $χ^{(2)}=41pm/V$, comparable to non-centrosymmetric media (LiNbO3, GaAs, GaN). The field-induced nonlinear silicon photonics will lead to a new class of CMOS compatible integrated devices spanning from near to mid infrared spectrum.
△ Less
Submitted 14 March, 2016;
originally announced March 2016.
-
Total absorption of visible light in ultra-thin weakly-absorbing semiconductor gratings
Authors:
Björn C. P. Sturmberg,
Teck K. Chong,
Duk-Yong Choi,
Thomas P. White,
Lindsay C. Botten,
Kokou B. Dossou,
Christopher G. Poulton,
Kylie R. Catchpole,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
The perfect absorption of light in subwavelength thickness layers generally relies on exotic materials, metamaterials or thick metallic gratings. Here we demonstrate that total light absorption can be achieved in ultra-thin gratings composed of conventional materials, including relatively weakly-absorbing semiconductors, which are compatible with optoelectronic applications such as photodetectors…
▽ More
The perfect absorption of light in subwavelength thickness layers generally relies on exotic materials, metamaterials or thick metallic gratings. Here we demonstrate that total light absorption can be achieved in ultra-thin gratings composed of conventional materials, including relatively weakly-absorbing semiconductors, which are compatible with optoelectronic applications such as photodetectors and optical modulators. We fabricate a 41 nm thick antimony sulphide grating structure that has a measured absorptance of A = 99.3% at a visible wavelength of 591 nm, in excellent agreement with theory. We infer that the absorption within the grating is A = 98.7%, with only A = 0.6% within the silver mirror. A planar reference sample absorbs A = 7.7% at this wavelength.
△ Less
Submitted 15 February, 2016;
originally announced February 2016.
-
Metamaterial control of stimulated Brillouin scattering
Authors:
M. J. A. Smith,
B. T. Kuhlmey,
C. Martijn de Sterke,
C. Wolff,
M. Lapine,
C. G. Poulton
Abstract:
Using full opto-acoustic numerical simulations, we demonstrate enhancement and suppression of the SBS gain in a metamaterial comprising a subwavelength cubic array of dielectric spheres suspended in a dielectric background material. We develop a general theoretical framework and present several numerical examples using technologically important materials. For As$_2$S$_3$ spheres in silicon, we ach…
▽ More
Using full opto-acoustic numerical simulations, we demonstrate enhancement and suppression of the SBS gain in a metamaterial comprising a subwavelength cubic array of dielectric spheres suspended in a dielectric background material. We develop a general theoretical framework and present several numerical examples using technologically important materials. For As$_2$S$_3$ spheres in silicon, we achieve a gain enhancement of more than an order of magnitude compared to pure silicon, and for GaAs spheres in silicon, full suppression is obtained. The gain for As$_2$S$_3$ glass can also be strongly suppressed by embedding silica spheres. The constituent terms of the gain coefficient are shown to depend in a complex way on the filling fraction. We find that electrostriction is the dominant effect behind the control of SBS in bulk media.
△ Less
Submitted 9 May, 2016; v1 submitted 9 February, 2016;
originally announced February 2016.
-
Phase-locking in cascaded stimulated Brillouin scattering
Authors:
Thomas F. S. Büttner,
Christopher G. Poulton,
M. J. Steel,
Darren D. Hudson,
Benjamin J. Eggleton
Abstract:
Cascaded stimulated Brillouin scattering (SBS) is a complex nonlinear optical process that results in the generation of several optical waves that are frequency shifted by an acoustic resonance frequency. Four-wave mixing (FWM) between these Brillouin shifted optical waves can create an equally spaced optical frequency comb with a stable spectral phase, i.e. a Brillouin frequency comb (BFC). Here,…
▽ More
Cascaded stimulated Brillouin scattering (SBS) is a complex nonlinear optical process that results in the generation of several optical waves that are frequency shifted by an acoustic resonance frequency. Four-wave mixing (FWM) between these Brillouin shifted optical waves can create an equally spaced optical frequency comb with a stable spectral phase, i.e. a Brillouin frequency comb (BFC). Here, we investigate phase-locking of the spectral components of BFCs, considering FWM interactions arising from the Kerr-nonlinearity as well as from coupling by the acoustic field. Deriving for the first time the coupled-mode equations that include all relevant nonlinear interactions, we examine the contribution of the various nonlinear processes to phase-locking, and show that different regimes can be obtained that depend on the length scale on which the field amplitudes vary.
△ Less
Submitted 25 October, 2015;
originally announced October 2015.
-
Brillouin resonance broadening due to structural variations in nanoscale waveguides
Authors:
Christian Wolff,
Raphael Van Laer,
Michael J. Steel,
Benjamin J. Eggleton,
Christopher G. Poulton
Abstract:
We study the impact of structural variations (that is slowly varying geometry aberrations and internal strain fields) on the width and shape of the stimulated Brillouin scattering (SBS) resonance in nanoscale waveguides. We find that they lead to an homogeneous resonance broadening through two distinct mechanisms: firstly, the acoustic frequency is directly influenced via mechanical nonlinearities…
▽ More
We study the impact of structural variations (that is slowly varying geometry aberrations and internal strain fields) on the width and shape of the stimulated Brillouin scattering (SBS) resonance in nanoscale waveguides. We find that they lead to an homogeneous resonance broadening through two distinct mechanisms: firstly, the acoustic frequency is directly influenced via mechanical nonlinearities; secondly, the optical wave numbers are influenced via the opto-mechanical nonlinearity leading to an additional acoustic frequency shift via the phase-matching condition. We find that this second mechanism is proportional to the opto-mechanical coupling and, hence, related to the SBS-gain itself. It is absent in intra-mode forward SBS, while it plays a significant role in backward scattering. In backward SBS increasing the opto-acoustic overlap beyond a threshold defined by the fabrication tolerances will therefore no longer yield the expected quadratic increase in overall Stokes amplification. Finally, we illustrate in a numerical example that in backward SBS and inter-mode forward SBS the existence of two broadening mechanisms with opposite sign also opens the possibility to compensate the effect of geometry-induced broadening. Our results can be transferred to other micro- and nano-structured waveguide geometries such as photonic crystal fibres.
△ Less
Submitted 12 January, 2016; v1 submitted 30 September, 2015;
originally announced October 2015.
-
Power limits and a figure of merit for stimulated Brillouin scattering in the presence of third and fifth order loss
Authors:
Christian Wolff,
Philipp Gutsche,
Michael J. Steel,
Benjamin J. Eggleton,
Christopher G. Poulton
Abstract:
We derive a set of design guidelines and a figure of merit to aid the engineering process of on-chip waveguides for strong Stimulated Brillouin Scattering (SBS). To this end, we examine the impact of several types of loss on the total amplification of the Stokes wave that can be achieved via SBS. We account for linear loss and nonlinear loss of third order (two-photon absorption, 2PA) and fifth or…
▽ More
We derive a set of design guidelines and a figure of merit to aid the engineering process of on-chip waveguides for strong Stimulated Brillouin Scattering (SBS). To this end, we examine the impact of several types of loss on the total amplification of the Stokes wave that can be achieved via SBS. We account for linear loss and nonlinear loss of third order (two-photon absorption, 2PA) and fifth order, most notably 2PA-induced free carrier absorption (FCA). From this, we derive an upper bound for the output power of continuous-wave Brillouin-lasers and show that the optimal operating conditions and maximal realisable Stokes amplification of any given waveguide structure are determined by a dimensionless parameter $\mathcal{F}$ involving the SBS-gain and all loss parameters. We provide simple expressions for optimal pump power, waveguide length and realisable amplification and demonstrate their utility in two example systems. Notably, we find that 2PA-induced FCA is a serious limitation to SBS in silicon and germanium for wavelengths shorter than 2200nm and 3600nm, respectively. In contrast, three-photon absorption is of no practical significance.
△ Less
Submitted 10 August, 2015;
originally announced August 2015.
-
Impact of nonlinear loss on Stimulated Brillouin Scattering
Authors:
Christian Wolff,
Philipp Gutsche,
Michael J. Steel,
Benjamin J. Eggleton,
Christopher G. Poulton
Abstract:
We study the impact of two-photon absorption (2PA) and fifth-order nonlinear loss such as 2PA-induced free-carrier absorption in semiconductors on the performance of Stimulated Brillouin Scattering devices. We formulate the equations of motion including effective loss coefficients, whose explicit expressions are provided for numerical evaluation in any waveguide geometry. We find that 2PA results…
▽ More
We study the impact of two-photon absorption (2PA) and fifth-order nonlinear loss such as 2PA-induced free-carrier absorption in semiconductors on the performance of Stimulated Brillouin Scattering devices. We formulate the equations of motion including effective loss coefficients, whose explicit expressions are provided for numerical evaluation in any waveguide geometry. We find that 2PA results in a monotonic, algebraic relationship between amplification, waveguide length and pump power, whereas fifth-order losses lead to a non-monotonic relationship. We define a figure of merit for materials and waveguide designs in the presence of fifth-order losses. From this, we determine the optimal waveguide length for the case of 2PA alone and upper bounds for the total Stokes amplification for the case of 2PA as well as fifth-order losses. The analysis is performed analytically using a small-signal approximation and is compared to numerical solutions of the full nonlinear modal equations.
△ Less
Submitted 11 May, 2015;
originally announced May 2015.
-
Add-drop filter based on dual photonic crystal nanobeam cavities in push-pull mode
Authors:
Christopher V. Poulton,
Xiaoge Zeng,
Mark T. Wade,
Milos A. Popovic
Abstract:
We demonstrate an add-drop filter based on a dual photonic crystal nanobeam cavity system that emulates the operation of a traveling-wave resonator and drops light on resonance to a single output port. Realized on an advanced SOI CMOS (IBM 45nm SOI) chip without any foundry process modifications, the device shows 16dB extinction in through port and 1dB loss in drop port with a 3dB bandwidth of 64G…
▽ More
We demonstrate an add-drop filter based on a dual photonic crystal nanobeam cavity system that emulates the operation of a traveling-wave resonator and drops light on resonance to a single output port. Realized on an advanced SOI CMOS (IBM 45nm SOI) chip without any foundry process modifications, the device shows 16dB extinction in through port and 1dB loss in drop port with a 3dB bandwidth of 64GHz. To the best of our knowledge, this is the first implementation of a four-port add-drop filter based on photonic crystal nanobeam cavities.
△ Less
Submitted 29 April, 2015;
originally announced April 2015.
-
Electrostriction enhancement in metamaterials
Authors:
M. J. A. Smith,
B. T. Kuhlmey,
C. Martijn de Sterke,
C. Wolff,
M. Lapine,
C. G. Poulton
Abstract:
We demonstrate a controllable enhancement in the electrostrictive properties of a medium using dilute composite artificial materials. Analytical expressions for the composite electrostriction are derived and used to show that enhancement, tunability and suppression can be achieved through a careful choice of constituent materials. Numerical examples with Ag, As$_2$S$_3$, Si and SiO$_2$ demonstrate…
▽ More
We demonstrate a controllable enhancement in the electrostrictive properties of a medium using dilute composite artificial materials. Analytical expressions for the composite electrostriction are derived and used to show that enhancement, tunability and suppression can be achieved through a careful choice of constituent materials. Numerical examples with Ag, As$_2$S$_3$, Si and SiO$_2$ demonstrate that even in a non-resonant regime, artificial materials can bring more than a threefold enhancement in the electrostriction.
△ Less
Submitted 29 May, 2015; v1 submitted 20 April, 2015;
originally announced April 2015.
-
Optimizing Photovoltaic Charge Generation of Nanowire Arrays: A Simple Semi-Analytic Approach
Authors:
Björn C. P. Sturmberg,
Kokou B. Dossou,
Lindsay C. Botten,
Ara A. Asatryan,
Christopher G. Poulton,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
Nanowire arrays exhibit efficient light coupling and strong light trap**, making them well suited to solar cell applications. The processes that contribute to their absorption are interrelated and highly dispersive, so the only current method of optimizing the absorption is by intensive numerical calculations. We present an efficient alternative which depends solely on the wavelength-dependent r…
▽ More
Nanowire arrays exhibit efficient light coupling and strong light trap**, making them well suited to solar cell applications. The processes that contribute to their absorption are interrelated and highly dispersive, so the only current method of optimizing the absorption is by intensive numerical calculations. We present an efficient alternative which depends solely on the wavelength-dependent refractive indices of the constituent materials. We choose each array parameter such that the number of modes propagating away from the absorber is minimized while the number of resonant modes within the absorber is maximized. From this we develop a semi-analytic method that quantitatively identifies the small range of parameters where arrays achieve maximum short circuit currents. This provides a fast route to optimizing NW array cell efficiencies by greatly reducing the geometries to study with full device models. Our approach is general and applies to a variety of materials and to a large range of array thicknesses.
△ Less
Submitted 16 December, 2014;
originally announced December 2014.
-
Formal selection rules for Brillouin scattering in integrated waveguides and structured fibers
Authors:
C. Wolff,
M. J. Steel,
C. G. Poulton
Abstract:
We derive formal selection rules for Stimulated Brillouin Scattering (SBS) in structured waveguides. Using a group-theoretical approach, we show how the waveguide symmetry determines which optical and acoustic modes interact for both forward and backward SBS. We present a general framework for determining this interaction and give important examples for SBS in waveguides with rectangular, triangul…
▽ More
We derive formal selection rules for Stimulated Brillouin Scattering (SBS) in structured waveguides. Using a group-theoretical approach, we show how the waveguide symmetry determines which optical and acoustic modes interact for both forward and backward SBS. We present a general framework for determining this interaction and give important examples for SBS in waveguides with rectangular, triangular and hexagonal symmetry. The important role played by degeneracy of the optical modes is illustrated. These selection rules are important for SBS-based device design and for a full understanding the physics of SBS in structured waveguides.
△ Less
Submitted 12 December, 2014; v1 submitted 31 October, 2014;
originally announced October 2014.
-
Absorption enhancing proximity effects in aperiodic nanowire arrays
Authors:
Björn C. P. Sturmberg,
Kokou B. Dossou,
Lindsay C. Botten,
Ara A. Asatryan,
Christopher G. Poulton,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
Aperiodic Nanowire (NW) arrays have higher absorption than equivalent periodic arrays, making them of interest for photovoltaic applications. An inevitable property of aperiodic arrays is the clustering of some NWs into closer proximity than in the equivalent periodic array. We focus on the modes of such clusters and show that the reduced symmetry associated with cluster formation allows external…
▽ More
Aperiodic Nanowire (NW) arrays have higher absorption than equivalent periodic arrays, making them of interest for photovoltaic applications. An inevitable property of aperiodic arrays is the clustering of some NWs into closer proximity than in the equivalent periodic array. We focus on the modes of such clusters and show that the reduced symmetry associated with cluster formation allows external coupling into modes which are dark in periodic arrays, thus increasing absorption. To exploit such modes fully, arrays must include tightly clustered NWs that are unlikely to arise from fabrication variations but must be created intentionally.
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
Nanowire array photovoltaics: Radial disorder versus design for optimal efficiency
Authors:
Björn C. P. Sturmberg,
Kokou B. Dossou,
Lindsay C. Botten,
Ara A. Asatryan,
Christopher G. Poulton,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
Solar cell designs based on disordered nanostructures tend to have higher efficiencies than structures with uniform absorbers, though the reason is poorly understood. To resolve this, we use a semi-analytic approach to determine the physical mechanism leading to enhanced efficiency in arrays containing nanowires with a variety of radii. We use our findings to systematically design arrays that outp…
▽ More
Solar cell designs based on disordered nanostructures tend to have higher efficiencies than structures with uniform absorbers, though the reason is poorly understood. To resolve this, we use a semi-analytic approach to determine the physical mechanism leading to enhanced efficiency in arrays containing nanowires with a variety of radii. We use our findings to systematically design arrays that outperform randomly composed structures. An ultimate efficiency of 23.75% is achieved with an array containing 30% silicon, an increase of almost 10% over a homogeneous film of equal thickness.
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
Stimulated Brillouin Scattering in integrated photonic waveguides: forces, scattering mechanisms and coupled mode analysis
Authors:
Christian Wolff,
Michael J. Steel,
Benjamin J. Eggleton,
Christopher G. Poulton
Abstract:
Recent theoretical studies of Stimulated Brillouin Scattering (SBS) in nanoscale devices have led to an intense research effort dedicated to the demonstration and application of this nonlinearity in on-chip systems. The key feature of SBS in integrated photonic waveguides is that small, high-contrast waveguides are predicted to experience powerful optical forces on the waveguide boundaries, which…
▽ More
Recent theoretical studies of Stimulated Brillouin Scattering (SBS) in nanoscale devices have led to an intense research effort dedicated to the demonstration and application of this nonlinearity in on-chip systems. The key feature of SBS in integrated photonic waveguides is that small, high-contrast waveguides are predicted to experience powerful optical forces on the waveguide boundaries, which are predicted to further boost the SBS gain that is already expected to grow dramatically in such structures because of the higher mode confinement alone. In all recent treatments, the effect of radiation pressure is included separately from the scattering action that the acoustic field exerts on the optical field. In contrast to this, we show here that the effects of radiation pressure and motion of the waveguide boundaries are inextricably linked. Central to this insight is a new formulation of the SBS interaction that unifies the treatment of light and sound, incorporating all relevant interaction mechanisms --- radiation pressure, waveguide boundary motion, electrostriction and photoelasticity --- from a rigorous thermodynamic perspective. Our approach also clarifies important points of ambiguity in the literature, such as the nature of edge-effects with regard to electrostriction, and of body-forces with respect to radiation pressure. This new perspective on Brillouin processes leads to physical insight with implications for the design and fabrication of SBS-based nanoscale devices.
△ Less
Submitted 22 July, 2015; v1 submitted 13 July, 2014;
originally announced July 2014.
-
Photonic Crystal Microcavities in a Microelectronics 45nm SOI CMOS Technology
Authors:
Christopher V. Poulton,
Xiaoge Zeng,
Mark T. Wade,
Jeffrey M. Shainline,
Jason S. Orcutt,
Milos A. Popovic
Abstract:
We demonstrate the first monolithically integrated linear photonic crystal microcavities in an advanced SOI CMOS microelectronics process (IBM 45nm 12SOI) with no in-foundry process modifications. The cavities were integrated into a standard microelectronics design flow meeting process design rules, and fabricated alongside transistors native to the process. We demonstrate both 1520nm wavelength a…
▽ More
We demonstrate the first monolithically integrated linear photonic crystal microcavities in an advanced SOI CMOS microelectronics process (IBM 45nm 12SOI) with no in-foundry process modifications. The cavities were integrated into a standard microelectronics design flow meeting process design rules, and fabricated alongside transistors native to the process. We demonstrate both 1520nm wavelength and 1180nm cavity designs using different cavity implementations due to design rule constraints. For the 1520nm and 1180nm designs, loaded quality factors of 2,000 and 4,000 are measured, and intrinsic quality factors of 100,000 and 60,000 are extracted. We also demonstrate an evanescent coupling geometry which decouples the cavity and waveguide-coupling design.
△ Less
Submitted 28 October, 2014; v1 submitted 22 June, 2014;
originally announced June 2014.
-
Phase-locking in Multi-Frequency Brillouin Oscillator via Four Wave Mixing
Authors:
Thomas F. S. Buettner,
Irina V. Kabakova,
Darren D. Hudson,
Ravi Pant,
Christopher G. Poulton,
Alexander C. Judge,
Benjamin J. Eggleton
Abstract:
Stimulated Brillouin scattering (SBS) and Kerr-nonlinear four wave-mixing (FWM) are among the most important and widely studied nonlinear effects in optical fibres. At high powers SBS can be cascaded producing multiple Stokes waves spaced by the Brillouin frequency shift. Here, we investigate the complex nonlinear interaction of the cascade of Stokes waves, generated in a Fabry-Perot chalcogenide…
▽ More
Stimulated Brillouin scattering (SBS) and Kerr-nonlinear four wave-mixing (FWM) are among the most important and widely studied nonlinear effects in optical fibres. At high powers SBS can be cascaded producing multiple Stokes waves spaced by the Brillouin frequency shift. Here, we investigate the complex nonlinear interaction of the cascade of Stokes waves, generated in a Fabry-Perot chalcogenide fibre resonator through the combined action of SBS and FWM. We demonstrate the existence of parameter regimes, in which pump and Stokes waves attain a phase-locked steady state. Real-time measurements of 40ps pulses with 8GHz repetition rate are presented, confirming short-and long-term stability. Numerical simulations qualitatively agree with experiments and show the significance of FWM in phase-locking of pump and Stokes waves. Our findings can be applied for the design of novel picosecond pulse sources with GHz repetition rate for optical communication systems.
△ Less
Submitted 17 February, 2014;
originally announced February 2014.
-
The Riemann Hypothesis for Symmetrised Combinations of Zeta Functions
Authors:
Ross C. McPhedran,
Christopher G. Poulton
Abstract:
This paper studies combinations of the Riemann zeta function, based on one defined by P.R. Taylor, which was shown by him to have all its zeros on the critical line. With a rescaled complex argument, this is denoted here by ${\cal T}_-(s)$, and is considered together with a counterpart function ${\cal T}_+(s)$, symmetric rather than antisymmetric about the critical line. We prove that…
▽ More
This paper studies combinations of the Riemann zeta function, based on one defined by P.R. Taylor, which was shown by him to have all its zeros on the critical line. With a rescaled complex argument, this is denoted here by ${\cal T}_-(s)$, and is considered together with a counterpart function ${\cal T}_+(s)$, symmetric rather than antisymmetric about the critical line. We prove that ${\cal T}_+(s)$ has all its zeros on the critical line, and that the zeros of both functions are all of first order. We establish a link between the zeros of ${\cal T}_-(s)$ and of ${\cal T}_+(s)$ with those of the zeros of the Riemann zeta function $ζ(2 s-1)$, which enables us to prove that, if the Riemann hypothesis holds, then the distribution function of the zeros of $ζ(2 s-1)$ agrees with those for ${\cal T}_-(s)$ and of ${\cal T}_+(s)$ in all terms which do not remain finite as $t\rightarrow \infty$.
△ Less
Submitted 27 August, 2014; v1 submitted 27 August, 2013;
originally announced August 2013.
-
Acoustic confinement and Stimulated Brillouin Scattering in integrated optical waveguides
Authors:
Christopher G. Poulton,
Ravi Pant,
Benjamin J. Eggleton
Abstract:
We examine the effect of acoustic mode confinement on Stimulated Brillouin Scattering in optical waveguides that consist of a guiding core embedded in a solid substrate. We find that SBS can arise due to coupling to acoustic modes in three different regimes. First, the acoustic modes may be guided by total internal reflection; in this case the SBS gain depends directly on the degree of confinement…
▽ More
We examine the effect of acoustic mode confinement on Stimulated Brillouin Scattering in optical waveguides that consist of a guiding core embedded in a solid substrate. We find that SBS can arise due to coupling to acoustic modes in three different regimes. First, the acoustic modes may be guided by total internal reflection; in this case the SBS gain depends directly on the degree of confinement of the acoustic mode in the core, which is in turn determined by the acoustic V-parameter. Second, the acoustic modes may be leaky, but may nevertheless have a sufficiently long lifetime to have a large effect on the SBS gain; the lifetime of acoustic modes in this regime depends not only on the contrast in acoustic properties between the core and the cladding, but is also highly dependent on the waveguide dimensions. Finally SBS may occur due to coupling to free modes, which exist even in the absence of acoustic confinement; we find that the cumulative effect of coupling to these non-confined modes results in significant SBS gain. We show how the different acoustic properties of core and cladding lead to these different regimes, and discuss the feasibility of SBS experiments using different material systems.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
-
Double-heterostructure cavities: from theory to design
Authors:
Sahand Mahmoodian,
J. E. Sipe,
Christopher G. Poulton,
Kokou B. Dossou,
Lindsay C. Botten,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
We derive a frequency-domain-based approach for radiation (FAR) from double-heterostructure cavity (DHC) modes. We use this to compute the quality factors and radiation patterns of DHC modes. The semi-analytic nature of our method enables us to provide a general relationship between the radiation pattern of the cavity and its geometry. We use this to provide general designs for ultrahigh quality f…
▽ More
We derive a frequency-domain-based approach for radiation (FAR) from double-heterostructure cavity (DHC) modes. We use this to compute the quality factors and radiation patterns of DHC modes. The semi-analytic nature of our method enables us to provide a general relationship between the radiation pattern of the cavity and its geometry. We use this to provide general designs for ultrahigh quality factor DHCs with radiation patterns that are engineered to emit vertically.
△ Less
Submitted 13 August, 2012;
originally announced August 2012.
-
First-principles method for high-$Q$ photonic crystal cavity mode calculations
Authors:
Sahand Mahmoodian,
J. E. Sipe,
Christopher G. Poulton,
Kokou B. Dossou,
Lindsay C. Botten,
Ross C. McPhedran,
C. Martijn de Sterke
Abstract:
We present a first-principles method to compute radiation properties of ultra-high quality factor photonic crystal cavities. Our Frequency-domain Approach for Radiation (FAR) can compute the far-field radiation pattern and quality factor of cavity modes $\sim 100$ times more rapidly than conventional finite-difference time domain calculations. It also provides a simple rule for engineering the cav…
▽ More
We present a first-principles method to compute radiation properties of ultra-high quality factor photonic crystal cavities. Our Frequency-domain Approach for Radiation (FAR) can compute the far-field radiation pattern and quality factor of cavity modes $\sim 100$ times more rapidly than conventional finite-difference time domain calculations. It also provides a simple rule for engineering the cavity's far-field radiation pattern.
△ Less
Submitted 18 July, 2012; v1 submitted 12 April, 2012;
originally announced April 2012.
-
Complete spectral gap in coupled dielectric waveguides embedded into metal
Authors:
Wei Liu,
Andrey Sukhorukov,
Andrey Miroshnichenko,
Chris Poulton,
Zhiyong Xu,
Dragomir Neshev,
Yuri Kivshar
Abstract:
We study a plasmonic coupler involving backward (TM_01) and forward (HE_11) modes of dielectric waveguides embedded into infinite metal. The simultaneously achievable contradirectional energy flows and codirectional wavevectors in different channels lead to a spectral gap, despite the absence of periodic structures along the waveguide. We demonstrate that a complete spectral gap can be achieved i…
▽ More
We study a plasmonic coupler involving backward (TM_01) and forward (HE_11) modes of dielectric waveguides embedded into infinite metal. The simultaneously achievable contradirectional energy flows and codirectional wavevectors in different channels lead to a spectral gap, despite the absence of periodic structures along the waveguide. We demonstrate that a complete spectral gap can be achieved in a symmetric structure composed of four coupled waveguides.
△ Less
Submitted 6 May, 2010;
originally announced May 2010.
-
A large-scale CO survey of the Rosette Molecular Cloud: assessing the effects of O stars on surrounding molecular gas
Authors:
W. R. F. Dent,
G. Hovey,
P. E. Dewdney,
T. Burgess,
A. G. Willis,
J. F. Lightfoot,
T. Jenness,
J. Leech,
H. E. Matthews,
M. Heyer,
C. Poulton
Abstract:
We present a new large-scale survey of J=3-2 12CO emission covering 4.8 square degrees around the Rosette Nebula. Approximately 2000 compact clumps are identified, with a spatially-invariant power law mass distribution index of -1.8. Most of the inner clumps show velocity gradients of 1-3 km/s/pc, directed away from the exciting nebula. The gradients decrease with distance from the central O sta…
▽ More
We present a new large-scale survey of J=3-2 12CO emission covering 4.8 square degrees around the Rosette Nebula. Approximately 2000 compact clumps are identified, with a spatially-invariant power law mass distribution index of -1.8. Most of the inner clumps show velocity gradients of 1-3 km/s/pc, directed away from the exciting nebula. The gradients decrease with distance from the central O stars, and are consistent with a photoionised gas acceleration model, assuming clump lifetimes of a few 10^5 yrs. However, in one clear case, the observed near-constant velocity gradient is difficult to explain with simple models. Most blue-shifted but very few of the red-shifted clumps are associated with dark absorbing optical globules, confirming that the dominant molecular gas motion is expansion away from the central nebula and O stars. Many clumps also lie in a molecular ring, having an expansion velocity of 30 km/s, radius 11pc, and dynamical lifetime of ~1Myr. The J=3-2/1-0 12CO line ratios of the clumps decrease with distance from the O stars, implying a gradient in their surface temperatures; the results are consistent with a simple model of clump surface heating due to the central stars.
Seven high-velocity molecular flows are found in the region, with a close correspondence between these flows and embedded young clusters. These outflows are sufficiently energetic to drive local gas turbulence within each cluster.
We find 14 clear examples of association between embedded young stars seen at 24um and CO clumps; these are thought to be photoevaporating molecular envelopes. The CO clumps without evidence of embedded stars tend to have lower velocity gradients, and it is suggested that the presence of the young star may extend the lifespan of the photoevaporating envelope.
△ Less
Submitted 24 February, 2009;
originally announced February 2009.
-
Waveguiding and Plasmon Resonances in Two-Dimensional Photonic Lattices of Gold and Silver Nanowires
Authors:
Markus A. Schmidt,
Luis N. Prill Sempere,
Hemant K. Tyagi,
Chris G. Poulton,
Philip St. J. Russell
Abstract:
We report the fabrication of triangular lattices of parallel gold and silver nanowires of high optical quality, with diameters down to 500 nm and length-to-diameter ratios as high as 100,000. The nanowires are supported by a silica glass matrix and are disposed around a central solid glass core, i.e., a missing nanowire. These cm-long structures make it possible to trap light within an array of…
▽ More
We report the fabrication of triangular lattices of parallel gold and silver nanowires of high optical quality, with diameters down to 500 nm and length-to-diameter ratios as high as 100,000. The nanowires are supported by a silica glass matrix and are disposed around a central solid glass core, i.e., a missing nanowire. These cm-long structures make it possible to trap light within an array of nanowires and characterize the plasmon resonances that form at specific optical frequencies. Such nanowire arrays have many potential applications, e.g., to imaging on the sub-wavelength scale.
△ Less
Submitted 28 November, 2007;
originally announced November 2007.
-
Detecting a rotation in the epsilon Eridani debris disc
Authors:
C. J. Poulton,
J. S. Greaves,
A. C. Cameron
Abstract:
The evidence for a rotation of the epsilon Eridani debris disc is examined. Data at 850 micron wavelength were previously obtained using the Submillimetre Common User Bolometer Array (SCUBA) over periods in 1997-1998 and 2000-2002. By chi-square fitting after shift and rotation operations, images from these two epochs were compared to recover proper motion and orbital motion of the disc. The sam…
▽ More
The evidence for a rotation of the epsilon Eridani debris disc is examined. Data at 850 micron wavelength were previously obtained using the Submillimetre Common User Bolometer Array (SCUBA) over periods in 1997-1998 and 2000-2002. By chi-square fitting after shift and rotation operations, images from these two epochs were compared to recover proper motion and orbital motion of the disc. The same procedures were then performed on simulated images to estimate the accuracy of the results.
Minima in the chi-square plots indicate a motion of the disc of approximately 0.6'' per year in the direction of the star's proper motion. This underestimates the true value of 1'' per year, implying that some of the structure in the disc region is not associated with epsilon Eridani, originating instead from background galaxies. From the chi-square fitting for orbital motion, a counterclockwise rotation rate of ~2.75 degrees per year is deduced. Comparisons with simulated data in which the disc is not rotating show that noise and background galaxies result in approximately Gaussian fluctuations with a standard deviation +/-1.5 degrees per year. Thus counterclockwise rotation of disc features is supported at approximately a 2-sigma level, after a 4-year time difference. This rate is faster than the Keplerian rate of 0.65 degrees per year for features at ~65 AU from the star, suggesting their motion is tracking a planet inside the dust ring.
Future observations with SCUBA-2 can rule out no rotation of the epsilon Eridani dust clumps with ~4-sigma confidence. Assuming a rate of about 2.75 degrees per year, the rotation of the features after a 10-year period could be shown to be >1 degree per year at the 3-sigma level.
△ Less
Submitted 23 June, 2006;
originally announced June 2006.