-
Symmetry protected 1D chains in mixed-valence iron oxides
Authors:
Denis M. Vasiukov,
Ghanashyam Khanal,
Ilya Kupenko,
Georgios Aprilis,
Sergey V. Ovsyannikov,
Stella Chariton,
Valerio Cerantola,
Vasily Potapkin,
Aleksandr I. Chumakov,
Leonid Dubrovinsky,
Kristjan Haule,
Elizabeth Blackburn
Abstract:
During the last decade of high-pressure research a whole new series of iron oxides was discovered, like Fe$_4$O$_5$, Fe$_5$O$_6$, Fe$_7$O$_9$ etc., featuring closely related structures with arrays of one-dimensional (1D) chains of trigonal prisms embedded between slabs of octahedra. Here, we develop a unified approach to the series based on a specific crystallographic generation mechanism which pr…
▽ More
During the last decade of high-pressure research a whole new series of iron oxides was discovered, like Fe$_4$O$_5$, Fe$_5$O$_6$, Fe$_7$O$_9$ etc., featuring closely related structures with arrays of one-dimensional (1D) chains of trigonal prisms embedded between slabs of octahedra. Here, we develop a unified approach to the series based on a specific crystallographic generation mechanism which predicts the structures of these oxides and naturally classifies them in terms of the slab cycle. When including magnetic interactions, we show that the 1D chains have a symmetry protection against magnetic perturbations from the iron ions in the slabs, and that the slab size determines the type of magnetic order, which is either ferromagnetic or antiferromagnetic. Dynamical mean-field theory calculations reveal the orbitally selective Mott state of the Fe ions and tendency of conductivity to low-dimensional behavior with particular enhancement along the 1D chains. Across the series, the decoupling of the chains increases, and so with the inherent charge ordering of the slabs, these structures have the potential to allow experimental realization of the model system of coupled 1D wires. We point out the possibility to stabilize these compounds in the thin-film form that, together with a wide range of possible ionic substitutions and fact that these compounds are recoverable at ambient pressure, makes them a very promising platform to engineer physical systems with interesting magnetotransport phenomena, as corroborated by the recent discovery of quantum Hall effect in ZrTe$_5$.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Muiltiscale modeling of electrical conductivity of R-BAPB polyimide + carbon nanotubes nanocomposites
Authors:
S. V. Larin,
S. V. Lyulin,
P. A. Likhomanova,
K. Yu. Khromov,
A. A. Knizhnik,
B. V. Potapkin
Abstract:
The electrical conductivity of the polyimide R-BAPB polymer filled with single-wall carbon nanotubes (CNT) with chirality (5,5) is modeled using a multi-scale approach. The modeling starts with molecular dynamics simulations of time-dependent fluctuating atomic configurations of polymer filled CNTs junctions. Then the atomic positions obtained in the first step are used to perform fully first-prin…
▽ More
The electrical conductivity of the polyimide R-BAPB polymer filled with single-wall carbon nanotubes (CNT) with chirality (5,5) is modeled using a multi-scale approach. The modeling starts with molecular dynamics simulations of time-dependent fluctuating atomic configurations of polymer filled CNTs junctions. Then the atomic positions obtained in the first step are used to perform fully first-principles microscopic calculations of the CNTs junctions contact resistances using the Green's function based quantum transport technique. And finally, those contact resistances are supplied as an input to a statistical calculation of a CNTs ensemble conductivity using a Monte Carlo percolation model. The results of the first-principles calculations show a very strong dependence of the polymer filled CNTs junctions contact resistance on the geometry of CNTs junctions, including an angle $\varphi$ between nanotubes axes and the positions of polymer atoms around CNTs. Incorporating into the percolation model this strong dependence as well as CNTs agglomeration, pushed the calculated values of electrical conductivity just above the percolation threshold below 0.01 S/m, which is within the experimental range for composites with various base polymers. Possible mechanisms for further reduction of composites conductivity are discussed.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Growth of AlGaN under the conditions of significant gallium evaporation: phase separation and enhanced lateral growth
Authors:
I. O. Mayboroda,
A. A. Knizhnik,
Yu. V. Grishchenko,
I. S. Ezubchenko,
Maxim L. Zanaveskin,
M. Yu. Presniakov,
B. V. Potapkin,
V. A. Ilyin
Abstract:
Growth kinetics of AlGaN in NH3 MBE under significant Ga desorption was studied. It was found that the addition of gallium stimulates 2D growth and provides better morphology of films compared to pure AlN. The effect was experimentally observed at up to 98% desorption of the im**ing gallium. We found that, under the conditions of significant thermal desorption, larger amounts of gallium were ret…
▽ More
Growth kinetics of AlGaN in NH3 MBE under significant Ga desorption was studied. It was found that the addition of gallium stimulates 2D growth and provides better morphology of films compared to pure AlN. The effect was experimentally observed at up to 98% desorption of the im**ing gallium. We found that, under the conditions of significant thermal desorption, larger amounts of gallium were retained at lateral boundaries of 3D surface features than at flat terraces because of the higher binding energy of Ga atoms at specific surface defects. The selective accumulation of gallium resulted in an increase in lateral growth component through the formation of the Ga-enriched AlGaN phase at boundaries of 3D surface features. We studied temperature dependence of AlGaN growth rate and developed a kinetic model analytically describing this dependence. As the model was in good agreement with the experimental data, we used it to estimate the increase in the binding energy of Ga atoms at surface defects compared to terrace surface cites using data on the Ga content in different AlGaN phases. We also applied first-principles calculations to the thermodynamic analysis of stable configurations on the AlN surface and then used these surface configurations to compare the binding energy of Ga atom at terraces and steps. Both first-principles calculations and analytical estimations of the experimental results gave similar values of difference in binding energies; this value is 0.3 eV.
△ Less
Submitted 5 February, 2017;
originally announced February 2017.
-
AA stacking, tribological and electronic properties of double-layer graphene with krypton spacer
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin,
Nikolai A. Poklonski,
Andrei. I. Siahlo,
Sergey A. Vyrko
Abstract:
Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translati…
▽ More
Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translational and rotational motion and the shear mode frequency of the graphene layers are calculated. For the incommensurate phase, both of the barriers are found to be negligibly small. A considerable change of tunneling conductance between the graphene layers separated by the commensurate krypton spacer at their relative subangstrom displacement is revealed by the use of the Bardeen method. The possibility of nanoelectromechanical systems based on the studied tribological and electronic properties of the considered heterostructures is discussed.
△ Less
Submitted 9 November, 2013;
originally announced November 2013.
-
Structure, energetic and tribological properties, and possible applications in NEMS of argon-separated double-layer graphene
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. I…
▽ More
The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. It is found that in the ground state, monolayer and bilayer argon spacers are incommensurate with the graphene layers, whereas submonolayer argon spacers which are commensurate with the graphene layers can exist only as metastable states. The calculations show that this incommensurability provides negligibly small static friction for relative motion of argon-separated graphene layers and, therefore, such a heterostructure holds great promise for the use in nanoelectromechanical systems. A scheme and operational principles of the nanorelay based on the revealed tribological properties of the heterostructure are proposed.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Ab initio study of edge effect on relative motion of walls in carbon nanotubes
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall l…
▽ More
Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall length at subnanometer scale and atomic structure of the edges if at least one of the walls is chiral. Threshold forces required to start relative motion of the short walls and temperatures at which the transition between diffusive and free motion of the short walls takes place are estimated. The edges are also shown to provide a considerable contribution to the barrier to relative rotation of commensurate nonchiral walls. For such walls, temperatures of orientational melting, i.e. the crossover from rotational diffusion to free relative rotation, are estimated. The possibility to produce nanotube-based bolt/nut pairs and nanobearings is discussed.
△ Less
Submitted 15 February, 2013;
originally announced February 2013.
-
Modeling of graphene-based NEMS
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce…
▽ More
The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce the potential relief of interlayer interaction energy in bilayer graphene. Telescopic oscillations and small relative vibrations of graphene layers are investigated using molecular dynamics simulations. It is shown that these vibrations are characterized with small Q-factor values. The perspectives of nanoelectromechanical systems based on relative motion or vibrations of graphene layers are discussed.
△ Less
Submitted 12 May, 2012;
originally announced May 2012.
-
Barriers to motion and rotation of graphene layers based on measurements of shear mode frequencies
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of…
▽ More
Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of graphene layers are interrelated and are determined by a single parameter characterizing the roughness of the potential energy relief. This relationship is used to estimate the barriers to relative motion and rotation of graphene layers based on experimental measurements of shear mode frequencies.
△ Less
Submitted 3 May, 2012;
originally announced May 2012.
-
Ni-assisted transformation of graphene flakes to fullerenes
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Boris V. Potapkin
Abstract:
Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for mo…
▽ More
Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for molecular dynamics simulations of the transformation of graphene flakes consisting of 50 - 400 atoms with and without Ni clusters attached. Free fullerenes, fullerenes with Ni clusters attached from outside and fullerenes encapsulating Ni clusters (Ni endofullerenes) are observed to form in the presence of Ni clusters consisting of 5 - 80 atoms. Moreover, a new type of heterofullerenes with a patch made of a Ni cluster is found to form as an intermediate structure during the transformation. The Ni clusters are shown to reduce the activation energy for the graphene-fullerene transformation from 4.0 eV to 1.5 - 1.9 eV, providing the decrease of the minimal temperature at which such a transformation can be observed experimentally from about 1400 K for free graphene flakes to about 700 - 800 K. While the transformation of free graphene flakes is found to occur through formation of chains of two-coordinated carbon atoms at the flake edges, the mechanism of the Ni-assisted graphene-fullerene transformation is revealed to be based on the transfer of carbon atoms from the graphene flake to the Ni cluster and back. The way of controlled synthesis of endofullerenes with a transition metal cluster inside and heterofullerenes with a transition metal patch is also proposed.
△ Less
Submitted 16 April, 2012;
originally announced April 2012.
-
Molecular dynamics simulation of the self-retracting motion of a graphene flake
Authors:
Andrei M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other fl…
▽ More
The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other flakes, the self-retracting motion is hindered by potential energy barriers. However, in this case, the rotation of the flake to incommensurate states is often observed. Such a rotation is found to be induced by the torque acting on the flake on hills of the potential relief of the interaction energy between the flakes. Contrary to carbon nanotubes, telescopic oscillations of the graphene flake are suppressed because of the high dynamic friction related to the excitation of flexural vibrations of the flake. This makes graphene promising for the use in fast-responding electromechanical memory cells.
△ Less
Submitted 19 December, 2011;
originally announced December 2011.
-
Commensurate-incommensurate phase transition in bilayer graphene
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of inco…
▽ More
A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of incommensurability defects (IDs) and the threshold force required to start relative motion of the layers on the basis of dispersion-corrected density functional theory calculations of the interlayer interaction energy as a function of the relative position of the layers. These estimates are confirmed by atomistic calculations using the DFT-D based classical potential. The possibility to measure the barriers for relative motion of graphene layers by the study of formation of IDs in bilayer graphene is discussed.
△ Less
Submitted 10 August, 2011;
originally announced August 2011.
-
Diffusion and drift of graphene flake on graphite surface
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Olga V. Ershova,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According t…
▽ More
Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According to the proposed mechanism, rotational transition of the flake from commensurate to incommensurate state takes place with subsequent simultaneous rotation and translational motion until a commensurate state is reached again, and so on. Analytic expressions for the diffusion coefficient and mobility of the flake corresponding to different mechanisms are derived in wide ranges of temperatures and sizes of the flake. The molecular dynamics simulations and estimates based on ab initio and empirical calculations demonstrate that the proposed mechanism can be dominant under certain conditions. The influence of structural defects on the diffusion of the flake is examined on the basis of calculations of the potential energy relief and molecular dynamics simulations. The methods of control over the diffusion and drift of graphene components in nanoelectromechanical systems are discussed. The possibility to experimentally determine the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained can be also applied to polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems.
△ Less
Submitted 28 March, 2011;
originally announced March 2011.
-
Fast diffusion of graphene flake on graphene layer
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Olga V. Ershova,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynami…
▽ More
Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynamics simulations and analytic estimates based on ab initio and semi-empirical calculations demonstrate that the proposed diffusion mechanism is dominant at temperatures T ~ Tcom, where Tcom corresponds to the barrier for transitions of the flake between adjacent energy minima in the commensurate states. For example, for the flake consisting of ~ 40, 200 and 700 atoms the contribution of the proposed diffusion mechanism through rotation of the flake to the incommensurate states exceeds that for diffusion of the flake in the commensurate states by one-two orders of magnitude at temperatures 50 - 150 K, 200 - 600 K and 800 - 2400 K, respectively. The possibility to experimentally measure the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained are also relevant for understanding of dynamic behavior of polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems.
△ Less
Submitted 20 February, 2011;
originally announced February 2011.
-
Nanotube-Based NEMS: Control vs. Thermodynamic Fluctuations
Authors:
O. V. Ershova,
I. V. Lebedeva,
Yu. E. Lozovik,
A. M. Popov,
A. A. Knizhnik,
B. V. Potapkin,
O. N. Bubel,
E. F. Kislyakov,
N. A. Poklonski
Abstract:
Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-d…
▽ More
Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-dimensional oscillator model. The analysis based both on this model and the Fokker-Planck equation for the oscillation energy distribution function shows how thermodynamic fluctuations restrict the possibility of controlling NEMS operation for systems of small sizes. The parameters of the force for which control of the oscillator operation is possible are determined.
△ Less
Submitted 29 April, 2010;
originally announced April 2010.
-
Dissipation and fluctuations in nanoelectromechanical systems based on carbon nanotubes
Authors:
I. V. Lebedeva,
A. A. Knizhnik,
A. M. Popov,
Yu. E. Lozovik,
B. V. Potapkin
Abstract:
Tribological characteristics of nanotube-based nanoelectromechanical systems (NEMS) exemplified by a gigahertz oscillator are studied. Various factors that influence the tribological properties of the nanotube-based NEMS are quantitatively analyzed with the use of molecular dynamics calculations of the quality factor (Q-factor) of the gigahertz oscillator. We demonstrate that commensurability of…
▽ More
Tribological characteristics of nanotube-based nanoelectromechanical systems (NEMS) exemplified by a gigahertz oscillator are studied. Various factors that influence the tribological properties of the nanotube-based NEMS are quantitatively analyzed with the use of molecular dynamics calculations of the quality factor (Q-factor) of the gigahertz oscillator. We demonstrate that commensurability of the nanotube walls can increase the dissipation rate, while the structure of the wall ends and the nanotube length do not influence the Q-factor. It is shown that the dissipation rate depends on the interwall distance and the way of fixation of the outer wall and is significant in the case of a poor fixation for the nanotubes with a large interwall distance. Defects are found to strongly decrease the Q-factor due to the excitation of low-frequency vibrational modes. No universal correlation between the static friction forces and the energy dissipation rate is established. We propose an explanation of the obtained results on the basis of the classical theory of vibrational-translational relaxation. Significant thermodynamics fluctuations are revealed in the gigahertz oscillator by molecular dynamics simulations and analyzed in the framework of the fluctuation-dissipation theorem. Possibility of designing the NEMS with a desirable Q-factor and their applications are discussed on the basis of the above results.
△ Less
Submitted 4 April, 2009;
originally announced April 2009.
