-
Interlayer interaction, shear vibrational mode, and tribological properties of two-dimensional bilayers with a commensurate moiré pattern
Authors:
Alexander S. Minkin,
Irina V. Lebedeva,
Andrey M. Popov,
Sergey A. Vyrko,
Nikolai A. Poklonski,
Yurii E. Lozovik
Abstract:
The potential energy surface (PES) of interlayer interaction of infinite twisted bilayer graphene is calculated for a set of commensurate moiré patterns using the registry-dependent Kolmogorov-Crespi empirical potential. The calculated PESs have the same shape for all considered moiré patterns with the unit cell size of the PES which is inversely related to the unit cell size of the moiré pattern.…
▽ More
The potential energy surface (PES) of interlayer interaction of infinite twisted bilayer graphene is calculated for a set of commensurate moiré patterns using the registry-dependent Kolmogorov-Crespi empirical potential. The calculated PESs have the same shape for all considered moiré patterns with the unit cell size of the PES which is inversely related to the unit cell size of the moiré pattern. The amplitude of PES corrugations is found to decrease exponentially upon increasing the size of the moiré pattern unit cell. An analytical expression for such a PES including the first Fourier harmonics compatible with the symmetries of both layers is derived. It is shown that the calculated PESs can be approximated by the derived expression with the accuracy within 1%. This means that different physical properties associated with relative in-plane motion of graphene layers are interrelated and can be expressed analytically as functions of the amplitude of PES corrugations. In this way, we obtain the shear mode frequency, shear modulus, shear strength and barrier for relative rotation of the commensurate twisted layers to a fully incommensurate state for the considered moiré patterns. This barrier may possibly lead to the macroscopic robust superlubricity for twisted graphene bilayer with a commensurate moiré pattern. The conclusions made should be valid for diverse 2D systems of twisted commensurate layers.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
Optimal model of semi-infinite graphene for ab initio calculations of reactions at graphene edges by the example of zigzag edge reconstruction
Authors:
Yulia G. Polynskaya,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov
Abstract:
We investigate how parameters of the model of semi-infinite graphene based on a graphene nanoribbon under periodic boundary conditions affect the accuracy of ab initio calculations of reactions at graphene edges by the example of the first stage of reconstruction of zigzag graphene edges, formation of a pentagon-heptagon pair. It is shown that to converge properly the results, the nanoribbon shoul…
▽ More
We investigate how parameters of the model of semi-infinite graphene based on a graphene nanoribbon under periodic boundary conditions affect the accuracy of ab initio calculations of reactions at graphene edges by the example of the first stage of reconstruction of zigzag graphene edges, formation of a pentagon-heptagon pair. It is shown that to converge properly the results, the nanoribbon should consist of at least 6 zigzag rows and periodic images of the pair along the nanoribbon axis should be separated by at least 6 hexagons. The converged reaction energy and activation barrier for formation of an isolated pentagon-heptagon pair are found to be -0.15 eV and 1.61 eV, respectively. It is also revealed that such defects reduce the graphene edge magnetization only locally but ordering of spins at opposite nanoribbon edges switches from the antiparallel (antiferromagnetic) to parallel one (ferromagnetic) upon increasing the defect density.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Reconstruction of Zigzag Graphene Edges: Energetics, Kinetics and Residual Defects
Authors:
Yulia G. Polynskaya,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov
Abstract:
Ab initio calculations are performed to study consecutive reconstruction of a zigzag graphene edge. According to the obtained energy profile along the reaction pathway, the first reconstruction step, formation of the first pentagon-heptagon pair, is the slowest one, while the growth of an already nucleated reconstructed edge domain should occur steadily at a much higher rate. Domains merge into on…
▽ More
Ab initio calculations are performed to study consecutive reconstruction of a zigzag graphene edge. According to the obtained energy profile along the reaction pathway, the first reconstruction step, formation of the first pentagon-heptagon pair, is the slowest one, while the growth of an already nucleated reconstructed edge domain should occur steadily at a much higher rate. Domains merge into one only in 1/4 of cases when they get in contact, while in the rest of the cases, residual defects are left. Structure, energy and magnetic properties of these defects are studied. It is found that spontaneous formation of pairs of residual defects (i.e. spontaneous domain nucleation) in the fully reconstructed edge is unlikely at temperatures below 1000 K. Using a kinetic model, we show that the average domain length is of several $\mathrmμ$m at room temperature and it decreases exponentially upon increasing the temperature at which the reconstruction takes place.
△ Less
Submitted 4 November, 2022;
originally announced November 2022.
-
Atomic-scale defects restricting structural superlubricity: Ab initio study study on the example of the twisted graphene bilayer
Authors:
Alexander S. Minkin,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
The potential energy surface (PES) of interlayer interaction of twisted bilayer graphene with vacancies in one of the layers is investigated via density functional theory (DFT) calculations with van der Waals corrections. These calculations give a non-negligible magnitude of PES corrugation of 28 meV per vacancy and barriers for relative sliding of the layers of 7 - 8 meV per vacancy for the moiré…
▽ More
The potential energy surface (PES) of interlayer interaction of twisted bilayer graphene with vacancies in one of the layers is investigated via density functional theory (DFT) calculations with van der Waals corrections. These calculations give a non-negligible magnitude of PES corrugation of 28 meV per vacancy and barriers for relative sliding of the layers of 7 - 8 meV per vacancy for the moiré pattern with coprime indices (2,1) (twist angle 21.8$^\circ$). At the same time, using the semiempirical potential fitted to the DFT results, we confirm that twisted bilayer graphene without defects exhibits superlubricity for the same moiré pattern and the magnitude of PES corrugation for the infinite bilayer is below the calculation accuracy. Our results imply that atomic-scale defects restrict the superlubricity of 2D layers and can determine static and dynamic tribological properties of these layers in a superlubric state. We also analyze computationally cheap approaches that can be used for modeling of tribological behavior of large-scale systems with defects. The adequacy of using state-of-the-art semiempirical potentials for interlayer interaction and approximations based on the first spatial Fourier harmonics for the description of interaction between graphene layers with defects is discussed.
△ Less
Submitted 30 September, 2021; v1 submitted 25 August, 2021;
originally announced August 2021.
-
Multiscale modeling strategy to solve fullerene formation mystery
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Sergey A. Vyrko,
Nikolai A. Poklonski
Abstract:
Since fullerene formation occurs under conditions where direct observation of atomic-scale reactions is not possible, modeling is the only way to reveal atomistic mechanisms which can lead to selection of abundant fullerene isomers (like C60-Ih). In the present paper we review the results obtained for different atomistic mechanisms by various modeling techniques. Although it seems that atomic-scal…
▽ More
Since fullerene formation occurs under conditions where direct observation of atomic-scale reactions is not possible, modeling is the only way to reveal atomistic mechanisms which can lead to selection of abundant fullerene isomers (like C60-Ih). In the present paper we review the results obtained for different atomistic mechanisms by various modeling techniques. Although it seems that atomic-scale processes related to odd fullerenes (such as growth by consecutive insertions of single carbon atoms and rearrangements of the sp$^2$ structure promoted by extra sp atoms) provide the main contribution to selection of abundant isomers, at the moment there is no conclusive evidence in favor of any particular atomistic mechanism. Thus, the following multiscale modeling strategy to solve the mystery of the high yield of abundant fullerene isomers is suggested. On the one hand, sets of reactions between fullerene isomers can be described using theoretical graph techniques. On the other hand, reaction schemes can be revealed by classical molecular dynamics simulations with subsequent refinement of the activation barriers by ab initio calculations. Based on the reaction sets with the reaction probabilities derived in this way, the different atomistic mechanisms of abundant fullerene isomer selection can be compared by kinetic models.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Healing of a hole in a carbon nanotube under electron irradiation in HRTEM
Authors:
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
Healing of a hole in a carbon nanotube under electron irradiation in HRTEM at room temperature is demonstrated using molecular dynamics simulations with the CompuTEM algorithm. Formation of an amorphous patch is observed in all simulation runs. The amorphous patch is formed in the absence of external carbon adatoms only via reconstruction of the carbon bond network. It consists mainly of 5-, 6- an…
▽ More
Healing of a hole in a carbon nanotube under electron irradiation in HRTEM at room temperature is demonstrated using molecular dynamics simulations with the CompuTEM algorithm. Formation of an amorphous patch is observed in all simulation runs. The amorphous patch is formed in the absence of external carbon adatoms only via reconstruction of the carbon bond network. It consists mainly of 5-, 6- and 7-membered rings and causes a small bottleneck. In addition, further growth of the initial amorphous patch under electron irradiation takes place. Two-coordinated atoms are found to play a crucial role in the latter process, analogous to autocatalisys of rearrangements of rings in fullerenes. The principal rearrangements in the presence of two-coordinated atoms can be described as generalized sp-defect migration: a bond is broken between two three-coordinated atoms and one of them forms a new bond with a nearby two-coordinated atom. If the new and former two-coordinated atoms are not bonded, the reaction leads both to displacement of the sp defect and changes in rings of the sp$^2$ carbon structure. Migration by hop** of two-coordinated atoms and other reactions involving simultaneous breakage of two bonds are also detected but much rarely. Long-living two-coordinated atoms in the patch structure and related fast growth of the patch are observed in more than half of the simulation runs. Since the amorphous patch and bottleneck affect the electronic properties of the nanotube, such nanotubes can be perspective for nanoelectronic applications.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
Transformation of a graphene nanoribbon into a hybrid 1D nanoobject with alternating double chains and polycyclic regions
Authors:
Alexander S. Sinitsa,
Irina V. Lebedeva,
Yulia G. Polynskaya,
Dimas G. de Oteyza,
Sergey V. Ratkevich,
Andrey A. Knizhnik,
Andrey M. Popov,
Nikolai A. Poklonski,
Yurii E. Lozovik
Abstract:
Molecular dynamics simulations show that a graphene nanoribbon with alternating regions which are one and three hexagons wide can transform into a hybrid 1D nanoobject with alternating double chains and polycyclic regions under electron irradiation in HRTEM. A scheme of synthesis of such a nanoribbon using Ullmann coupling and dehydrogenation reactions is proposed. The reactive REBO-1990EVC potent…
▽ More
Molecular dynamics simulations show that a graphene nanoribbon with alternating regions which are one and three hexagons wide can transform into a hybrid 1D nanoobject with alternating double chains and polycyclic regions under electron irradiation in HRTEM. A scheme of synthesis of such a nanoribbon using Ullmann coupling and dehydrogenation reactions is proposed. The reactive REBO-1990EVC potential is adapted for simulations of carbon-hydrogen systems and is used in combination with the CompuTEM algorithm for modeling of electron irradiation effects. The atomistic mechanism of formation of the new hybrid 1D nanoobject is found to be the following. Firstly hydrogen is removed by electron impacts. Then spontaneous breaking of bonds between carbon atoms leads to decomposition of narrow regions of the graphene nanoribbon into double chains. Simultaneously thermally activated growth of polycyclic regions occurs. Density functional theory calculations give barriers along the growth path of polycyclic regions consistent with this mechanism. Electronic properties of the new 1D nanoobject are shown to be strongly affected by the edge magnetism and make this nanostructure promising nanoelectronic and spintronic applications. The way of synthesis the 1D nanoobject proposed here can be considered as an example of the general three-stage strategy of production of nanoobjects and macromolecules. 1) precursors are synthesized by traditional chemical method, 2) precursors are placed in HRTEM with the electron energy that is sufficient only to remove hydrogen atoms, 3) as a result of hydrogen removal, the precursors become unstable or metastable and transform into new nanoobjects or macromolecules.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Molecular Dynamics Study of sp-Defect Migration in Odd Fullerene: Possible Role in Synthesis of Abundant Isomers of Fullerenes
Authors:
Alexander S. Sinitsa,
Irina V. Lebedeva,
Yulia G. Polynskaya,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
To explain recent experiment showing the role of odd fullerenes in formation of abundant fullerene isomers a reactive molecular dynamics (MD) study has been performed. Three types of bond rearrangement reactions are found by MD simulations at 3000 K in odd fullerenes which contain an extra sp atom among all other sp$^2$ atoms. The first type is sto-chastic sp-defect migration analogous to exchange…
▽ More
To explain recent experiment showing the role of odd fullerenes in formation of abundant fullerene isomers a reactive molecular dynamics (MD) study has been performed. Three types of bond rearrangement reactions are found by MD simulations at 3000 K in odd fullerenes which contain an extra sp atom among all other sp$^2$ atoms. The first type is sto-chastic sp-defect migration analogous to exchange mechanism of adatom migration on a surface. The second type cor-responds to changes in the ring configuration of the sp$^2$-structure assisted by the sp atom which can lead to annealing of seven-membered rings or separation of five-membered rings. The third type is formation of short-living one-coordinated atoms or two additional sp atoms. Annihilation of a pair of sp defects has been also observed in the MD simulations. It is shown that the frequency of sp-defect migration at a lower temperature, as estimated from performed density functional theory calculations of the barriers of sp-defect migration events, is sufficient to deliver the sp atom to defects of sp$^2$ structure during the fullerene formation time. Based on these results, we propose to supplement the self-organization paradigm of fullerene formation by the following four-stage atomistic mechanism of formation of abundant isomers of fullerenes: 1) attachment of single carbon atoms, 2) sp-defect migration to sp$^2$-structure defects, 3) sp$^2$-defect annealing assisted by the sp atom and 4) subsequent annihilation of pairs of sp defects.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Universal description of potential energy surface of interlayer interaction in two-dimensional materials by first spatial Fourier harmonics
Authors:
Alexander V. Lebedev,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik,
Nikolai A. Poklonski,
Sergey A. Vyrko
Abstract:
We propose a hypothesis that the potential energy surface (PES) of interlayer interaction in diverse 2D materials can be universally described by the first spatial Fourier harmonics. This statement (checked previously for the interactions between graphene and hexagonal boron nitride layers in different combinations) is verified in the present paper for the case of hydrofluorinated graphene (HFG) b…
▽ More
We propose a hypothesis that the potential energy surface (PES) of interlayer interaction in diverse 2D materials can be universally described by the first spatial Fourier harmonics. This statement (checked previously for the interactions between graphene and hexagonal boron nitride layers in different combinations) is verified in the present paper for the case of hydrofluorinated graphene (HFG) bilayer with hydrogen bonding between fluorine and hydrogen at the interlayer interface. The PES for HFG bilayer is obtained through density functional theory calculations with van der Waals corrections. An analytical expression based on the first Fourier harmonics describing the PES which corresponds to the symmetry of HFG layers is derived. It is found that the calculated PES can be described by the first Fourier harmonics with the accuracy of 3\% relative to the PES corrugation. The shear mode frequency, shear modulus and barrier for relative rotation of the layers to incommensurate states of HFG bilayer are estimated. Additionally it is shown that HFG bilayer is stable relative to the formation of HF molecules as a result of chemical reactions between the layers.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Two phases with different domain wall networks and a reentrant phase transition in bilayer graphene under strain
Authors:
Irina V. Lebedeva,
Andrey M. Popov
Abstract:
The analytical two-chain Frenkel-Kontorova model is used to describe domain wall networks in bilayer graphene upon biaxial stretching of one of the layers. We show that the commensurate-incommensurate phase transition leading to formation of a regular triangular domain wall network at the relative biaxial elongation of $3.0\cdot 10^{-3}$ is followed by the transition to another incommensurate phas…
▽ More
The analytical two-chain Frenkel-Kontorova model is used to describe domain wall networks in bilayer graphene upon biaxial stretching of one of the layers. We show that the commensurate-incommensurate phase transition leading to formation of a regular triangular domain wall network at the relative biaxial elongation of $3.0\cdot 10^{-3}$ is followed by the transition to another incommensurate phase with a striped network at the elongation of $3.7\cdot 10^{-3}$. The reentrant transition to the phase with a triangular domain wall network is predicted for the elongation $\sim10^{-2}$.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Energetics and Structure of Domain Wall Networks in Minimally Twisted Bilayer Graphene under Strain
Authors:
Irina V. Lebedeva,
Andrey M. Popov
Abstract:
The parameters of the triangular domain wall network in bilayer graphene with a simultaneously twisted and biaxially stretched bottom layer are studied using the two-chain Frenkel-Kontorova model. It is demonstrated that if the graphene layers are free to rotate, they prefer to stay co-aligned upon stretching the bottom layer and the regular triangular network of tensile domain walls is formed upo…
▽ More
The parameters of the triangular domain wall network in bilayer graphene with a simultaneously twisted and biaxially stretched bottom layer are studied using the two-chain Frenkel-Kontorova model. It is demonstrated that if the graphene layers are free to rotate, they prefer to stay co-aligned upon stretching the bottom layer and the regular triangular network of tensile domain walls is formed upon the commensurate-incommensurate phase transition. If the angle between the layers is fixed, the regular triangular network of shear domain walls is observed at zero elongation of the bottom layer. Upon stretching the bottom layer, however, the domain walls transform into the tensile ones and the size of the commensurate domains decreases. We also show that the parameters of the isosceles triangular domain wall network in twisted bilayer graphene under shear strain can be determined through purely geometrical considerations. Experimental analysis of the orientation of domain walls and period of the triangular network would, on the one hand, contribute to understanding of the interlayer interaction of graphene layers, and, on the other hand, serve for detection of relative strains and rotation between the layers. Vice versa external strains can be used to control the parameters of the triangular domain wall network and, therefore, electronic properties of twisted bilayer graphene.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
The effect of hyperfine splitting on Stark broadening for three blue-green Cu I lines in laser-induced plasma
Authors:
Andrey M. Popov,
Nikolay I. Sushkov,
Sergey M. Zaytsev,
Timur A. Labutin
Abstract:
Stark effect is observed in many natural and artificial plasmas and is of great importance for diagnostic purposes. Since this effect alters profiles of spectral lines, it should be taken into account when assessing chemical composition of radiation sources, including stars. Copper is one of the elements which studies of stellar atmospheres deal with. To this end, UV and visible Cu lines are used.…
▽ More
Stark effect is observed in many natural and artificial plasmas and is of great importance for diagnostic purposes. Since this effect alters profiles of spectral lines, it should be taken into account when assessing chemical composition of radiation sources, including stars. Copper is one of the elements which studies of stellar atmospheres deal with. To this end, UV and visible Cu lines are used. However, there is a lack of agreement between existing data on their Stark parameters. It is therefore of interest to obtain new experimental data on these lines and to compare them to previous results. In this work, we have estimated Stark widths and shifts for three blue-green lines at 5105.54, 5153.24, and 5218.20 A (corresponding transitions are [3d104p] 2P° - [3d94s2] 2D and [3d104d] 2D - [3d104p] 2P°) observed in a "long-spark" laser-induced plasma. For the first time, we have accurately estimated an impact of hyperfine splitting on the profile shapes of the studied lines taking also into account the isotope shifts. We have shown that both effects considerably influence shift and width of Cu I line at 5105.54 A, and shifts of Cu I lines at 5153.24 and 5218.20 A.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Commensurate-incommensurate phase transition and a network of domain walls in bilayer graphene with a biaxially stretched layer
Authors:
Irina V. Lebedeva,
Andrey M. Popov
Abstract:
The two-chain Frenkel-Kontorova model is applied for an analytical description of the energy and structure of the network of domain walls in bilayer graphene. Using this approach, the commensurate-incommensurate phase transition upon biaxial stretching of one of the graphene layers is considered. We demonstrate that formation of the equilateral triangular network of domain walls becomes energetica…
▽ More
The two-chain Frenkel-Kontorova model is applied for an analytical description of the energy and structure of the network of domain walls in bilayer graphene. Using this approach, the commensurate-incommensurate phase transition upon biaxial stretching of one of the graphene layers is considered. We demonstrate that formation of the equilateral triangular network of domain walls becomes energetically favourable above the critical relative biaxial elongation of the bottom layer of $3.0\cdot 10^{-3}$. It is shown that the optimal period of the triangular network of domain walls is inversely proportional to the difference between the biaxial elongation of the bottom layer and the critical elongation as long as it is much greater than the width of domain walls. Quantitative estimates of the contribution of a single dislocation node to the system energy and the period of the network of domain walls are obtained. Experimental measurements of the period could help to verify the energy of the fully incommensurate state (such as obtained by relative rotation of the layers) with respect to the commensurate one.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Elastic constants of graphene: Comparison of empirical potentials and DFT calculations
Authors:
Irina V. Lebedeva,
Alexander S. Minkin,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
The capacity of popular classical interatomic potentials to describe elastic properties of graphene is tested. The Tersoff potential, Brenner reactive bond-order potentials REBO-1990, REBO-2000, REBO-2002 and AIREBO as well as LCBOP, PPBE-G, ReaxFF-CHO and ReaxFF-C2013 are considered. Linear and non-linear elastic response of graphene under uniaxial stretching is investigated by static energy calc…
▽ More
The capacity of popular classical interatomic potentials to describe elastic properties of graphene is tested. The Tersoff potential, Brenner reactive bond-order potentials REBO-1990, REBO-2000, REBO-2002 and AIREBO as well as LCBOP, PPBE-G, ReaxFF-CHO and ReaxFF-C2013 are considered. Linear and non-linear elastic response of graphene under uniaxial stretching is investigated by static energy calculations. The Young's modulus, Poisson's ratio and high-order elastic moduli are verified against the reference data available from experimental measurements and ab initio studies. The density functional theory calculations are performed to complement the reference data on the effective Young's modulus and Poisson's ratio at small but finite elongations. It is observed that for all the potentials considered, the elastic energy deviates remarkably from the simple quadratic dependence already at elongations of several percent. Nevertheless, LCBOP provides the results consistent with the reference data and thus realistically describes in-plane deformations of graphene. Reasonable agreement is also observed for the computationally cheap PPBE-G potential. REBO-2000, AIREBO and REBO-2002 give a strongly non-linear elastic response with a wrong sign of the third-order elastic modulus and the corresponding results are very far from the reference data. The ReaxFF potentials drastically overestimate the Poisson's ratio. Furthermore, ReaxFF-C2013 shows a number of numerical artefacts at finite elongations. The bending rigidity of graphene is also obtained by static energy calculations for large-diameter carbon nanotubes. The best agreement with the experimental and ab initio data in this case is achieved using the REBO-2000, REBO-2002 and ReaxFF potentials. Therefore, none of the considered potentials adequately describes both in-plane and out-of-plane deformations of graphene.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Long triple carbon chains formation by heat treatment of graphene nanoribbon: Molecular dynamics study with revised Brenner potential
Authors:
Alexander S. Sinitsa,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behavior is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation o…
▽ More
The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behavior is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation of triple, double and single carbon chains with the length of hundreds of atoms in 3-ZGNRs and edge reconstruction with only short chains and GNR width reduction in 4-ZGNRs. The chain formation mechanism in 3-ZGNRs is revealed by analysis of bond reorganization reactions and is based on the interplay of two processes. The first one is breaking of bonds between 3 zigzag atomic rows leading to triple chain formation. The second one is bond breaking within the same zigzag atomic row, which occurs predominantly through generation of pentagons with subsequent bond breaking in pentagons and results in single or double chain formation. The DFT calculations of the barriers for relevant reactions are consistent with the mechanism proposed. The possibility of chain-based nanoelectronic devices with a controllable number of chains is discussed.
△ Less
Submitted 6 October, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Structure and energetics of carbon, hexagonal boron nitride and carbon/hexagonal boron nitride single-layer and bilayer nanoscrolls
Authors:
Andrei I. Siahlo,
Nikolai A. Poklonski,
Alexander V. Lebedev,
Irina V. Lebedeva,
Andrey M. Popov,
Sergey A. Vyrko,
Andrey A. Knizhnik,
Yurii E. Lozovik
Abstract:
Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribb…
▽ More
Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribbons for which stable and energetically favorable nanoscrolls are possible are determined. Barriers to rolling of single-layer and bilayer nanoribbons into nanoscrolls and barriers to nanoscroll unrolling are calculated. Based on the calculated barriers nanoscroll lifetimes in the stable state are estimated. Elastic constants for bending of graphene and hexagonal boron nitride layers used in the model are found by density functional theory calculations.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Stacking in incommensurate graphene/hexagonal-boron-nitride heterostructures based on ab initio study of interlayer interaction
Authors:
Alexander V. Lebedev,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated…
▽ More
The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated that the dependence of the interlayer interaction energy on the relative in-plane position of the layers can be fitted with high accuracy by a simple expression determined by the system symmetry. The use of only two independent parameters in such an approximation suggests that various physical properties of flat graphene/boron-nitride systems are interrelated and can be expressed through these two parameters. Here we estimate some of the corresponding physical properties that can be accessed experimentally, including the correction to the period of the Moiré superstructure for the highly incommensurate ground state of graphene/boron-nitride bilayer coming from the interlayer interaction, width of stacking dislocations in slightly incommensurate systems of boron nitride on stretched graphene and shear mode frequencies for commensurate graphene/boron-nitride systems, such as a flake on a layer. We propose that the commensurate-incommensurate phase transition can be observed in boron nitride on stretched graphene and experimental measurements of the corresponding critical strain can be also used to get an insight into graphene/boron-nitride interactions.
△ Less
Submitted 29 August, 2017;
originally announced August 2017.
-
Transformation of amorphous carbon clusters to fullerenes
Authors:
Alexander S. Sinitsa,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. Based on the analysis of both structure and energy of the system, it is found that fullerene formation occurs in two stages. Firstly, fast transformation of the initial amorphous structure into a hollow sp$^2$ shell with a few chains attached occu…
▽ More
Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. Based on the analysis of both structure and energy of the system, it is found that fullerene formation occurs in two stages. Firstly, fast transformation of the initial amorphous structure into a hollow sp$^2$ shell with a few chains attached occurs with a considerable decrease of the potential energy and the number of atoms belonging to chains and to the amorphous domain. Then, insertion of remaining carbon chains into the sp$^2$ network takes place at the same time with the fullerene shell formation. Two types of defects remaining after the formation of the fullerene shell are revealed: 7-membered rings and single one-coordinated atoms. One of the fullerene structures obtained contains no defects at all, which demonstrates that defect-free carbon cages can be occasionally formed from amorphous precursors directly without defect healing. No structural changes are observed after the fullerene formation, suggesting that defect healing is a slow process in comparison with the fullerene shell formation. The schemes of the revealed reactions of chain atoms insertion into the fullerene shell just before its completion are presented. The results of the performed simulations are summarized within the paradigm of fullerene formation due to selforganization of the carbon system.
△ Less
Submitted 4 August, 2017;
originally announced August 2017.
-
Formation of nickel clusters wrapped in carbon cages: towards new endohedral metallofullerene synthesis
Authors:
Alexander S. Sinitsa,
Thomas W. Chamberlain,
Thilo Zoberbier,
Irina V. Lebedeva,
Andrey M. Popov,
Andrey A. Knizhnik,
Robert L. McSweeney,
Johannes Biskupek,
Ute Kaiser,
Andrei N. Khlobystov
Abstract:
In spite of the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in…
▽ More
In spite of the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in aberration-corrected high-resolution transmission electron spectroscopy (AC-HRTEM) of a metal cluster surrounded by amorphous carbon inside a carbon nanotube serving as a nano-reactor and apply this method for synthesis of nickel EMFs. The use of ACHRTEM makes it possible not only to synthesize new, previously unattainable nanoobjects but also to study in situ the mechanism of structural transformations. Molecular dynamics simulations using the state-of-the-art approach for modeling the effect of electron irradiation are performed to rationalise the experimental observations and to link the observed processes with conditions of bulk EMF synthesis.
△ Less
Submitted 4 August, 2017;
originally announced August 2017.
-
Edge stacking dislocations in two-dimensional bilayers with a small lattice mismatch
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov
Abstract:
Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in…
▽ More
Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in bilayer graphene are obtained depending on the magnitude of elongation and angles between the edge Burgers vector, direction of elongation and edge. The barrier for penetration of stacking dislocations inside the bilayer is estimated. The possibilities to measure the barrier to relative motion of graphene layers and strain of graphene on a substrate by observation of edge stacking dislocations are discussed.
△ Less
Submitted 4 August, 2017;
originally announced August 2017.
-
Comparison of performance of van der Waals-corrected exchange-correlation functionals for interlayer interaction in graphene and hexagonal boron nitride
Authors:
Irina V. Lebedeva,
Alexander V. Lebedev,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable prop…
▽ More
Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable properties associated with relative in-plane and out-of-plane motion of the layers including the shear modulus and modulus for axial compression, shear mode frequency and frequency of out-of-plane vibrations are considered. The PBE-D3(BJ) functional gives the best results for the stackings of hexagonal boron nitride and graphite that are known to be ground-state from the experimental studies. However, it fails to describe the order of metastable states of boron nitride in energy. The PBE-D3 and vdW-DF2 functionals, which reproduce this order correctly, are identified as the optimal choice for general studies. The vdW-DF2 functional is preferred for evaluation of the modulus for axial compression and frequency of out-of-plane vibrations, while the PBE-D3 functional is somewhat more accurate in calculations of the shear modulus and shear mode frequency. The best description of the latter properties, however, is achieved also using the vdW-DF2 functional combined with consideration of the experimental interlayer distance. In the specific case of graphene, the PBE-D2 functional works very well and can be further improved by adjustment of the parameters.
△ Less
Submitted 21 August, 2018; v1 submitted 4 August, 2017;
originally announced August 2017.
-
Prospects of odd and even harmonics generation by an atom in high-intensity laser field
Authors:
A. V. Bogatskaya,
E. A. Volkova,
A. M. Popov
Abstract:
New approach to study the spontaneous emission of the atomic system in the presence of the high-intensity laser field is used to study the process of harmonic generation. The analysis is based on the consideration of quantum system interaction with quantized field modes beeing in vacuum state, while the intense laser field is considered classically beyond the perturbation theory. The numerical ana…
▽ More
New approach to study the spontaneous emission of the atomic system in the presence of the high-intensity laser field is used to study the process of harmonic generation. The analysis is based on the consideration of quantum system interaction with quantized field modes beeing in vacuum state, while the intense laser field is considered classically beyond the perturbation theory. The numerical analysis of the emission from the single one-electron one dimensional atom irradiated by the femtosecond laser pulse of Ti-Sa laser is discussed. It is demonstrated that not only odd but also even harmonics can be emitted if the laser field is strong enough. The origin of appearance of even harmonics is studied. The obtained results are compared with that found in the frames of semiclassical approach widely used to study the harmonic generation. It is found that semiclassical approach is inapplicable in the strong-field limit.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Spectroscopy of the atomic system driven by high intensity laser field
Authors:
A. V. Bogatskaya,
E. A. Volkova,
A. M. Popov
Abstract:
Spontaneous emission of the quantum system driven by a high intensity classical laser field is analyzed. The study is based on the accurate consideration of quantum system interaction with vacuum quantized field modes in the first order of perturbation theory, while the intense laser field is considered classically beyond the perturbation theory. It is demonstrated that the spectrum of the spontan…
▽ More
Spontaneous emission of the quantum system driven by a high intensity classical laser field is analyzed. The study is based on the accurate consideration of quantum system interaction with vacuum quantized field modes in the first order of perturbation theory, while the intense laser field is considered classically beyond the perturbation theory. It is demonstrated that the spectrum of the spontaneous emission can be used for analyzing of the strong-field dynamics and structure of the energy spectrum of the atomic system. The obtained data are compared with that obtained in the frames of semiclassical approximation typically used for analyzing of the strong-field dynamics. It is found that the applicability of the semiclassical approach is strictly limited.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Dislocations in stacking and commensurate-incommensurate phase transition in bilayer graphene and hexagonal boron nitride
Authors:
Irina V. Lebedeva,
Alexander V. Lebedev,
Andrey M. Popov,
Andrey A. Knizhnik
Abstract:
Dislocations corresponding to a change of stacking in two-dimensional hexagonal bilayers, graphene and boron nitride, and associated with boundaries between commensurate domains are investigated using the two-chain Frenkel-Kontorova model on top of ab initio calculations. Structural transformations of bilayers in which the bottom layer is stretched and the upper one is left to relax freely are con…
▽ More
Dislocations corresponding to a change of stacking in two-dimensional hexagonal bilayers, graphene and boron nitride, and associated with boundaries between commensurate domains are investigated using the two-chain Frenkel-Kontorova model on top of ab initio calculations. Structural transformations of bilayers in which the bottom layer is stretched and the upper one is left to relax freely are considered for gradually increased elongation of the bottom layer. Formation energies of dislocations, dislocation width and orientation of the boundary between commensurate domains are analyzed depending on the magnitude and direction of elongation. The second-order phase transition from the commensurate phase to the incommensurate one with multiple dislocations is predicted to take place at some critical elongation. The order parameter for this transition corresponds to the density of dislocations, which grows continuously upon increasing the elongation of the bottom layer above the critical value. In graphene and metastable boron nitride with the layers aligned in the same direction, where elementary dislocations are partial, this transition, however, is preceded by formation of the first dislocation at the elongation smaller than the critical one. The phase diagrams including this intermediate state are plotted in coordinates of the magnitude and direction of elongation of the bottom layer.
△ Less
Submitted 13 June, 2016;
originally announced June 2016.
-
Interlayer interaction and related properties of bilayer hexagonal boron nitride: ab initio study
Authors:
Alexander V. Lebedev,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov
Abstract:
Principal characteristics of interlayer interaction and relative motion of hexagonal boron nitride (h-BN) layers are investigated by the first-principles method taking into account van der Waals interactions. Dependences of the interlayer interaction energy on relative translational displacement of h-BN layers (potential energy surfaces) are calculated for two relative orientations of the layers,…
▽ More
Principal characteristics of interlayer interaction and relative motion of hexagonal boron nitride (h-BN) layers are investigated by the first-principles method taking into account van der Waals interactions. Dependences of the interlayer interaction energy on relative translational displacement of h-BN layers (potential energy surfaces) are calculated for two relative orientations of the layers, namely, for the layers aligned in the same direction and in the opposite directions upon relative rotation of the layers by 180 degrees. It is shown that the potential energy surfaces of bilayer h-BN can be approximated by the first Fourier components determined by symmetry. As a result, a wide set of physical qualintities describing relative motion of h-BN layers aligned in the same direction including barriers to their relative sliding and rotation, shear mode frequency and shear modulus are determined by a single parameter corresponding to the roughness of the potential energy surface, similar to bilayer graphene. The properties of h-BN layers aligned in the opposite directions are described by two such parameters. The possibility of partial and full dislocations in stacking of the layers is predicted for h-BN layers aligned in the same and opposite directions, respectively. The extended two-chain Frenkel-Kontorova model is used to estimate the width and formation energy of these dislocations on the basis of the calculated potential energy surfaces.
△ Less
Submitted 11 April, 2016; v1 submitted 29 February, 2016;
originally announced February 2016.
-
Atomistic mechanism of carbon nanotube cutting catalyzed by nickel under the electron beam
Authors:
Irina V. Lebedeva,
Thomas W. Chamberlain,
Andrey M. Popov,
Andrey A. Knizhnik,
Thilo Zoberbier,
Johannes Biskupek,
Ute Kaiser,
Andrei N. Khlobystov
Abstract:
The cutting of single-walled carbon nanotubes by an 80 keV electron beam catalyzed by nickel clusters is imaged in situ using aberration-corrected high-resolution transmission electron microscopy. Extensive molecular dynamics simulations within the CompuTEM approach provide insight into the mechanism of this process and demonstrate that the combination of irradiation and nickel catalyst is crucial…
▽ More
The cutting of single-walled carbon nanotubes by an 80 keV electron beam catalyzed by nickel clusters is imaged in situ using aberration-corrected high-resolution transmission electron microscopy. Extensive molecular dynamics simulations within the CompuTEM approach provide insight into the mechanism of this process and demonstrate that the combination of irradiation and nickel catalyst is crucial for the cutting process to take place. The atomistic mechanism of cutting is revealed by detailed analysis of irradiation-induced reactions of bonds reorganization and atom ejection in the vicinity of the nickel cluster, showing a highly complex interplay of different chemical transformations catalysed by the metal cluster. One of the most prevalent pathways includes three consecutive stages: formation of polyyne carbon chains from carbon nanotube, dissociation of the carbon chains into single and pairs of adatoms adsorbed on the nickel cluster, and ejection of these adatoms leading to the cutting of nanotube. Significant variations in the atom ejection rate are discovered depending on the process stage and nanotube diameter. The revealed mechanism and kinetic characteristics of cutting process provide fundamental knowledge for the development of new methodologies for control and manipulation of carbon structures at the nanoscale.
△ Less
Submitted 21 November, 2014;
originally announced November 2014.
-
Force and magnetic field sensor based on measurement of tunneling conductance between ends of coaxial carbon nanotubes
Authors:
A. M. Popov,
I. V. Lebedeva,
A. A. Knizhnik,
Yu. E. Lozovik,
N. A. Poklonski,
A. I. Siahlo,
S. A. Vyrko,
S. V. Ratkevich
Abstract:
The interaction and tunneling conductance between oppositely located ends of coaxial carbon nanotubes are studied by the example of two (11,11) nanotubes with open ends terminated by hydrogen atoms. The Green function formalism is applied to determine the tunneling current through the nanotube ends as a function of the distance between the ends, relative orientation of the nanotubes and voltage ap…
▽ More
The interaction and tunneling conductance between oppositely located ends of coaxial carbon nanotubes are studied by the example of two (11,11) nanotubes with open ends terminated by hydrogen atoms. The Green function formalism is applied to determine the tunneling current through the nanotube ends as a function of the distance between the ends, relative orientation of the nanotubes and voltage applied. The energy favorable configuration of the coaxial nanotubes is obtained by the analysis of their interaction energy at different distances between the nanotube ends and angles of their relative rotation. Using these calculations, a general scheme of the force sensor based on the interaction between ends of coaxial nanotubes is proposed and the relation between the tunneling conductance and measured force is established for the considered nanotubes. The operational characteristics of this device as a magnetic field sensor based on measurements of the magnetic force acting on the coaxial nanotubes filled with magnetic endofullerenes are estimated.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Formation of nickel-carbon heterofullerenes under electron irradiation
Authors:
Alexander S. Sinitsa,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Stephen T. Skowron,
Elena Bichoutskaia
Abstract:
A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of the nickel-carbon potential (I. V. Lebedeva et al. J. Phys. Chem. C, 2012, 116, 6…
▽ More
A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of the nickel-carbon potential (I. V. Lebedeva et al. J. Phys. Chem. C, 2012, 116, 6572) are modified to improve description of the balance between the fullerene elastic energy and graphene edge energies in this process. The metal-carbon nanoobjects formed are found to range from heterofullerenes with a metal patch to particles consisting of closed fullerene and metal clusters linked by chemical bonds. The atomic-scale transformation mechanism is revealed by the local structure analysis. The average time of formation of nanoobjects and their lifetime under electron irradiation are estimated for experimental conditions of high-resolution transmission electron microscope (HRTEM). The sequence of images of nanostructure evolution with time during its observation by HRTEM is also modelled. Furthermore, the possibility of batch production of studied metal-carbon nanoobjects and solids based on these nanoobjects is discussed.
△ Less
Submitted 10 October, 2018; v1 submitted 21 May, 2014;
originally announced May 2014.
-
Tunneling current between graphene layers
Authors:
Nikolai A. Poklonski,
Andrei I. Siahlo,
Sergey A. Vyrko,
Andrey M. Popov,
Yurii E. Lozovik
Abstract:
The physical model that allows to calculate the values of the tunneling current be-tween graphene layers is proposed. The tunneling current according to the pro-posed model is proportional to the area of tunneling transition. The calculated value of tunneling conductivity is in qualitative agreement with experimental data.
The physical model that allows to calculate the values of the tunneling current be-tween graphene layers is proposed. The tunneling current according to the pro-posed model is proportional to the area of tunneling transition. The calculated value of tunneling conductivity is in qualitative agreement with experimental data.
△ Less
Submitted 28 November, 2013;
originally announced November 2013.
-
AA stacking, tribological and electronic properties of double-layer graphene with krypton spacer
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin,
Nikolai A. Poklonski,
Andrei. I. Siahlo,
Sergey A. Vyrko
Abstract:
Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translati…
▽ More
Structural, energetic and tribological characteristics of double-layer graphene with commensurate and incommensurate krypton spacers of nearly monolayer coverage are studied within the van der Waals-corrected density functional theory. It is shown that when the spacer is in the commensurate phase, the graphene layers have the AA stacking. For this phase, the barriers to relative in-plane translational and rotational motion and the shear mode frequency of the graphene layers are calculated. For the incommensurate phase, both of the barriers are found to be negligibly small. A considerable change of tunneling conductance between the graphene layers separated by the commensurate krypton spacer at their relative subangstrom displacement is revealed by the use of the Bardeen method. The possibility of nanoelectromechanical systems based on the studied tribological and electronic properties of the considered heterostructures is discussed.
△ Less
Submitted 9 November, 2013;
originally announced November 2013.
-
Approaches to modelling irradiation-induced processes in transmission electron microscopy
Authors:
Stephen T. Skowron,
Irina V. Lebedeva,
Andrey M. Popov,
Elena Bichoutskaia
Abstract:
The recent progress in high-resolution transmission electron microscopy (HRTEM) has given rise to the possibility of in situ observations of nanostructure transformations and chemical reactions induced by electron irradiation. In this article we briefly summarise experimental observations and discuss in detail atomistic modelling of irradiation-induced processes in HRTEM, as well as mechanisms of…
▽ More
The recent progress in high-resolution transmission electron microscopy (HRTEM) has given rise to the possibility of in situ observations of nanostructure transformations and chemical reactions induced by electron irradiation. In this article we briefly summarise experimental observations and discuss in detail atomistic modelling of irradiation-induced processes in HRTEM, as well as mechanisms of such processes recognised due to modelling. Accurate molecular dynamics (MD) techniques based on first principles or tight-binding models are employed in the analysis of single irradiation-induced events, and classical MD simulations are combined with a kinetic Monte Carlo algorithm to simulate continuous irradiation of nanomaterials. It has been shown that sulphur-terminated graphene nanoribbons are formed inside carbon nanotubes as a result of an irradiation-selective chemical reaction. The process of fullerene formation in HRTEM during continuous electron irradiation of a small graphene flake has been simulated, and mechanisms driving this transformation analysed.
△ Less
Submitted 21 September, 2013;
originally announced September 2013.
-
Structure, energetic and tribological properties, and possible applications in NEMS of argon-separated double-layer graphene
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. I…
▽ More
The possibility to control the commensurability and distance between graphene layers separated by a dielectric spacer is considered by the example of a heterostructure consisting of double-layer graphene separated by atomic layers of argon. Van der Waals corrected density functional theory (DFT-D) is applied to study structural, energetic and tribological characteristics of this heterostructure. It is found that in the ground state, monolayer and bilayer argon spacers are incommensurate with the graphene layers, whereas submonolayer argon spacers which are commensurate with the graphene layers can exist only as metastable states. The calculations show that this incommensurability provides negligibly small static friction for relative motion of argon-separated graphene layers and, therefore, such a heterostructure holds great promise for the use in nanoelectromechanical systems. A scheme and operational principles of the nanorelay based on the revealed tribological properties of the heterostructure are proposed.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Graphene-based nanodynamometer
Authors:
N. A. Poklonski,
A. I. Siahlo,
S. A. Vyrko,
A. M. Popov,
Yu. E. Lozovik,
I. V. Lebedeva,
A. A. Knizhnik
Abstract:
A new concept of an electromechanical nanodynamometer based on the relative displacement of layers of bilayer graphene is proposed. In this nanodynamometer, force acting on one of the graphene layers causes the relative displacement of this layer and related change of conductance between the layers. Such a force can be determined by measurements of the tunneling conductance between the layers. Dep…
▽ More
A new concept of an electromechanical nanodynamometer based on the relative displacement of layers of bilayer graphene is proposed. In this nanodynamometer, force acting on one of the graphene layers causes the relative displacement of this layer and related change of conductance between the layers. Such a force can be determined by measurements of the tunneling conductance between the layers. Dependences of the interlayer interaction energy and the conductance between the graphene layers on their relative position are calculated within the first-principles approach corrected for van der Waals interactions and the Bardeen method, respectively. The characteristics of the nanodynamometer are determined and its possible applications are discussed.
△ Less
Submitted 14 December, 2015; v1 submitted 2 April, 2013;
originally announced April 2013.
-
Ab initio study of edge effect on relative motion of walls in carbon nanotubes
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall l…
▽ More
Interwall interaction energies of double-walled nanotubes (DWNTs) with long inner and short outer walls are calculated as functions of coordinates describing relative rotation and displacement of the walls using van der Waals corrected density functional theory. The magnitude of corrugation and the shape of the potential energy relief are found to be very sensitive to changes of the shorter wall length at subnanometer scale and atomic structure of the edges if at least one of the walls is chiral. Threshold forces required to start relative motion of the short walls and temperatures at which the transition between diffusive and free motion of the short walls takes place are estimated. The edges are also shown to provide a considerable contribution to the barrier to relative rotation of commensurate nonchiral walls. For such walls, temperatures of orientational melting, i.e. the crossover from rotational diffusion to free relative rotation, are estimated. The possibility to produce nanotube-based bolt/nut pairs and nanobearings is discussed.
△ Less
Submitted 15 February, 2013;
originally announced February 2013.
-
Structural phase transition and band gap of uniaxially deformed (6,0) carbon nanotube
Authors:
N. A. Poklonski,
S. V. Ratkevich,
S. A. Vyrko,
E. F. Kislyakov,
O. N. Bubel',
A. M. Popov,
Yu. E. Lozovik,
Nguyen Ngoc Hieu,
Nguyen Ai Viet
Abstract:
The atomic and band structures of the (6,0) zigzag carbon nanotube at its axial elongation are calculated by semiempirical molecular orbital and by tight-binding methods. The ground state of the nanotube is found to have a Kekule structure with four types of bonds and difference between lengths of long and short bonds of about 0.005 nm. The structural phase transition is revealed at ~9% elongation…
▽ More
The atomic and band structures of the (6,0) zigzag carbon nanotube at its axial elongation are calculated by semiempirical molecular orbital and by tight-binding methods. The ground state of the nanotube is found to have a Kekule structure with four types of bonds and difference between lengths of long and short bonds of about 0.005 nm. The structural phase transition is revealed at ~9% elongation, resulting in a quinoid structure with two types of bonds. This structural phase transition is followed by the transition from a narrow gap to moderate gap semiconductor. Validity of the semiempirical PM3 method is discussed.
△ Less
Submitted 8 February, 2018; v1 submitted 23 January, 2013;
originally announced January 2013.
-
Modeling of graphene-based NEMS
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce…
▽ More
The possibility of designing nanoelectromechanical systems (NEMS) based on relative motion or vibrations of graphene layers is analyzed. Ab initio and empirical calculations of the potential relief of interlayer interaction energy in bilayer graphene are performed. A new potential based on the density functional theory calculations with the dispersion correction is developed to reliably reproduce the potential relief of interlayer interaction energy in bilayer graphene. Telescopic oscillations and small relative vibrations of graphene layers are investigated using molecular dynamics simulations. It is shown that these vibrations are characterized with small Q-factor values. The perspectives of nanoelectromechanical systems based on relative motion or vibrations of graphene layers are discussed.
△ Less
Submitted 12 May, 2012;
originally announced May 2012.
-
Barriers to motion and rotation of graphene layers based on measurements of shear mode frequencies
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of…
▽ More
Both van der Waals corrected density functional theory and classical calculations show that the potential relief of interaction energy between layers of graphite and few-layer graphene can be described by a simple expression containing only the first Fourier components. Thus a set of physical quantities and phenomena associated with in-plane relative vibration, translational motion and rotation of graphene layers are interrelated and are determined by a single parameter characterizing the roughness of the potential energy relief. This relationship is used to estimate the barriers to relative motion and rotation of graphene layers based on experimental measurements of shear mode frequencies.
△ Less
Submitted 3 May, 2012;
originally announced May 2012.
-
Nanotube-based scanning rotational microscope
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik
Abstract:
A scheme of the scanning rotational microscope is designed. This scheme is based on using carbon nanotubes simultaneously as a probe tip and as a bolt/nut pair which converts translational displacements of two piezo actuators into pure rotation of the probe tip. First-principles calculations of the interaction energy between movable and rotational parts of the microscope confirms the capability fo…
▽ More
A scheme of the scanning rotational microscope is designed. This scheme is based on using carbon nanotubes simultaneously as a probe tip and as a bolt/nut pair which converts translational displacements of two piezo actuators into pure rotation of the probe tip. First-principles calculations of the interaction energy between movable and rotational parts of the microscope confirms the capability for its operation. The scanning rotational microscope with a chemically functionalized nanotube-based tip can be used to study how the interaction between individual molecules or a molecule and a surface depends on their relative orientation.
△ Less
Submitted 23 April, 2012;
originally announced April 2012.
-
Ni-assisted transformation of graphene flakes to fullerenes
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Boris V. Potapkin
Abstract:
Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for mo…
▽ More
Transformation of graphene flakes to fullerenes assisted by Ni clusters is investigated using molecular dynamics simulations. The bond-order potential for Ni-C systems is developed. The potential reproduces the experimental and first-principles data on the physical properties of pure Ni as well as on relative energies of carbon species on Ni surfaces and in Ni bulk. The potential is applied for molecular dynamics simulations of the transformation of graphene flakes consisting of 50 - 400 atoms with and without Ni clusters attached. Free fullerenes, fullerenes with Ni clusters attached from outside and fullerenes encapsulating Ni clusters (Ni endofullerenes) are observed to form in the presence of Ni clusters consisting of 5 - 80 atoms. Moreover, a new type of heterofullerenes with a patch made of a Ni cluster is found to form as an intermediate structure during the transformation. The Ni clusters are shown to reduce the activation energy for the graphene-fullerene transformation from 4.0 eV to 1.5 - 1.9 eV, providing the decrease of the minimal temperature at which such a transformation can be observed experimentally from about 1400 K for free graphene flakes to about 700 - 800 K. While the transformation of free graphene flakes is found to occur through formation of chains of two-coordinated carbon atoms at the flake edges, the mechanism of the Ni-assisted graphene-fullerene transformation is revealed to be based on the transfer of carbon atoms from the graphene flake to the Ni cluster and back. The way of controlled synthesis of endofullerenes with a transition metal cluster inside and heterofullerenes with a transition metal patch is also proposed.
△ Less
Submitted 16 April, 2012;
originally announced April 2012.
-
Molecular dynamics simulation of the self-retracting motion of a graphene flake
Authors:
Andrei M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other fl…
▽ More
The self-retracting motion of a graphene flake on a stack of graphene flakes is studied using molecular dynamics simulations. It is shown that in the case when the extended flake is initially rotated to an incommensurate state, there is no barrier to the self-retracting motion of the flake and the flake retracts as fast as possible. If the extended flake is initially commensurate with the other flakes, the self-retracting motion is hindered by potential energy barriers. However, in this case, the rotation of the flake to incommensurate states is often observed. Such a rotation is found to be induced by the torque acting on the flake on hills of the potential relief of the interaction energy between the flakes. Contrary to carbon nanotubes, telescopic oscillations of the graphene flake are suppressed because of the high dynamic friction related to the excitation of flexural vibrations of the flake. This makes graphene promising for the use in fast-responding electromechanical memory cells.
△ Less
Submitted 19 December, 2011;
originally announced December 2011.
-
Can Barrier to Relative Sliding of Carbon Nanotube Walls Be Measured?
Authors:
Andrey M. Popov,
Yurii E. Lozovik,
Evgenii K. Krivorotov
Abstract:
Interwall interaction energies, as well as barriers to relative sliding of the walls along the nanotube axis, are first calculated for pairs of both armchair or both zigzag adjacent walls of carbon nanotubes with a wide range of radiuses. It is found that for the pairs with the radius of the outer wall greater than 5 nm both the interwall interaction energy and barriers to the relative sliding per…
▽ More
Interwall interaction energies, as well as barriers to relative sliding of the walls along the nanotube axis, are first calculated for pairs of both armchair or both zigzag adjacent walls of carbon nanotubes with a wide range of radiuses. It is found that for the pairs with the radius of the outer wall greater than 5 nm both the interwall interaction energy and barriers to the relative sliding per one atom of the outer wall only slightly depends on the wall radius. A wide set of the measurable physical quantities determined by these barriers are estimated as a function of the wall radius: shear strengths and diffusion coefficients for relative sliding of the walls along the axis, as well as frequencies of relative axial oscillations of the walls. For nonreversible telescopic extension of the walls, maximum overlap of the walls for which threshold static friction forces are greater than capillary forces is estimated. Possibility of experimental verification of the calculated barriers by measurements of the estimated physical quantities is discussed.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
-
Commensurate-incommensurate phase transition in bilayer graphene
Authors:
Andrey M. Popov,
Irina V. Lebedeva,
Andrey A. Knizhnik,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of inco…
▽ More
A commensurate-incommensurate phase transition in bilayer graphene is investigated in the framework of the Frenkel-Kontorova model extended to the case of two interacting chains of particles. Analytic expressions are derived to estimate the critical unit elongation of one of the graphene layers at which the transition to the incommensurate phase takes place, the length and formation energy of incommensurability defects (IDs) and the threshold force required to start relative motion of the layers on the basis of dispersion-corrected density functional theory calculations of the interlayer interaction energy as a function of the relative position of the layers. These estimates are confirmed by atomistic calculations using the DFT-D based classical potential. The possibility to measure the barriers for relative motion of graphene layers by the study of formation of IDs in bilayer graphene is discussed.
△ Less
Submitted 10 August, 2011;
originally announced August 2011.
-
Effect of Peierls transition in armchair carbon nanotube on dynamical behaviour of encapsulated fullerene
Authors:
N. A. Poklonski,
S. A. Vyrko,
E. F. Kislyakov,
N. N. Hieu,
O. N. Bubel',
A. M. Popov,
Yu. E. Lozovik,
A. A. Knizhnik,
I. V. Lebedeva,
N. A. Viet
Abstract:
The changes of dynamical behaviour of a single fullerene molecule inside an armchair carbon nanotube caused by the structural Peierls transition in the nanotube are considered. The structures of the smallest C20 and Fe@C20 fullerenes are computed using the spin-polarized density functional theory. Significant changes of the barriers for motion along the nanotube axis and rotation of these fulleren…
▽ More
The changes of dynamical behaviour of a single fullerene molecule inside an armchair carbon nanotube caused by the structural Peierls transition in the nanotube are considered. The structures of the smallest C20 and Fe@C20 fullerenes are computed using the spin-polarized density functional theory. Significant changes of the barriers for motion along the nanotube axis and rotation of these fullerenes inside the (8,8) nanotube are found at the Peierls transition. It is shown that the coefficients of translational and rotational diffusions of these fullerenes inside the nanotube change by several orders of magnitude. The possibility of inverse orientational melting, i.e. with a decrease of temperature, for the systems under consideration is predicted.
△ Less
Submitted 8 February, 2018; v1 submitted 6 April, 2011;
originally announced April 2011.
-
Diffusion and drift of graphene flake on graphite surface
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Olga V. Ershova,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According t…
▽ More
Diffusion and drift of a graphene flake on a graphite surface are analyzed. A potential energy relief of the graphene flake is computed using ab initio and empirical calculations. Based on the analysis of this relief, different mechanisms of diffusion and drift of the graphene flake on the graphite surface are considered. A new mechanism of diffusion and drift of the flake is proposed. According to the proposed mechanism, rotational transition of the flake from commensurate to incommensurate state takes place with subsequent simultaneous rotation and translational motion until a commensurate state is reached again, and so on. Analytic expressions for the diffusion coefficient and mobility of the flake corresponding to different mechanisms are derived in wide ranges of temperatures and sizes of the flake. The molecular dynamics simulations and estimates based on ab initio and empirical calculations demonstrate that the proposed mechanism can be dominant under certain conditions. The influence of structural defects on the diffusion of the flake is examined on the basis of calculations of the potential energy relief and molecular dynamics simulations. The methods of control over the diffusion and drift of graphene components in nanoelectromechanical systems are discussed. The possibility to experimentally determine the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained can be also applied to polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems.
△ Less
Submitted 28 March, 2011;
originally announced March 2011.
-
Fast diffusion of graphene flake on graphene layer
Authors:
Irina V. Lebedeva,
Andrey A. Knizhnik,
Andrey M. Popov,
Olga V. Ershova,
Yurii E. Lozovik,
Boris V. Potapkin
Abstract:
Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynami…
▽ More
Diffusion of a graphene flake on a graphene layer is analyzed and a new diffusion mechanism is proposed for the system under consideration. According to this mechanism, rotational transition of the flake from commensurate to incommensurate states takes place with subsequent simultaneous rotation and translational motion until the commensurate state is reached again, and so on. The molecular dynamics simulations and analytic estimates based on ab initio and semi-empirical calculations demonstrate that the proposed diffusion mechanism is dominant at temperatures T ~ Tcom, where Tcom corresponds to the barrier for transitions of the flake between adjacent energy minima in the commensurate states. For example, for the flake consisting of ~ 40, 200 and 700 atoms the contribution of the proposed diffusion mechanism through rotation of the flake to the incommensurate states exceeds that for diffusion of the flake in the commensurate states by one-two orders of magnitude at temperatures 50 - 150 K, 200 - 600 K and 800 - 2400 K, respectively. The possibility to experimentally measure the barriers to relative motion of graphene layers based on the study of diffusion of a graphene flake is considered. The results obtained are also relevant for understanding of dynamic behavior of polycyclic aromatic molecules on graphene and should be qualitatively valid for a set of commensurate adsorbate-adsorbent systems.
△ Less
Submitted 20 February, 2011;
originally announced February 2011.
-
Properties and nanotechnological applications of nanotubes
Authors:
Yu E Lozovik,
A M Popov
Abstract:
Possible applications of carbon nanotubes in nanoelectromechanical systems (NEMSs) based on rela-tive motion and interaction of nanotubes walls are considered for wide set of NEMS. This set includes nanomotors, nanoactuator, nanorelay, variable nanoresistor, gigahertz oscillator, nanothermometer and so on. The nanotube properties and theory for relative motion and interaction of nanotubes walls is…
▽ More
Possible applications of carbon nanotubes in nanoelectromechanical systems (NEMSs) based on rela-tive motion and interaction of nanotubes walls are considered for wide set of NEMS. This set includes nanomotors, nanoactuator, nanorelay, variable nanoresistor, gigahertz oscillator, nanothermometer and so on. The nanotube properties and theory for relative motion and interaction of nanotubes walls is de-scribed. The principal schemes, operation principles, and methods of actuation of the considered NEMS are considered. The development of nanotechnological techniques which are necessary for production of nanotube-baseb NEMS are discussed.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Nanotube-Based NEMS: Control vs. Thermodynamic Fluctuations
Authors:
O. V. Ershova,
I. V. Lebedeva,
Yu. E. Lozovik,
A. M. Popov,
A. A. Knizhnik,
B. V. Potapkin,
O. N. Bubel,
E. F. Kislyakov,
N. A. Poklonski
Abstract:
Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-d…
▽ More
Multi-scale simulations of nanotube-based nanoelectromechanical systems (NEMS) controlled by a nonuniform electric field are performed by an example of a gigahertz oscillator. Using molecular dynamics simulations, we obtain the friction coefficients and characteristics of the thermal noise associated with the relative motion of the nanotube walls. These results are used in a phenomenological one-dimensional oscillator model. The analysis based both on this model and the Fokker-Planck equation for the oscillation energy distribution function shows how thermodynamic fluctuations restrict the possibility of controlling NEMS operation for systems of small sizes. The parameters of the force for which control of the oscillator operation is possible are determined.
△ Less
Submitted 29 April, 2010;
originally announced April 2010.
-
Magnetically operated nanorelay based on two single-walled carbon nanotubes filled with endofullerenes Fe@C20
Authors:
N. A. Poklonski,
E. F. Kislyakov,
S. A. Vyrko,
N. N. Hieu,
O. N. Bubel',
A. I. Siahlo,
I. V. Lebedeva,
A. A. Knizhnik,
A. M. Popov,
Yu. E. Lozovik
Abstract:
Structural and energy characteristics of the smallest magnetic endofullerene Fe@C20 have been calculated using the density functional theory approach. The ground state of Fe@C20 is found to be a septet state, and the magnetic moment of Fe@C20 is estimated to be 8 Bohr magnetons. Characteristics of an (8,8) carbon nanotube with a single Fe@C20 inside are studied in the framework of the semiempirica…
▽ More
Structural and energy characteristics of the smallest magnetic endofullerene Fe@C20 have been calculated using the density functional theory approach. The ground state of Fe@C20 is found to be a septet state, and the magnetic moment of Fe@C20 is estimated to be 8 Bohr magnetons. Characteristics of an (8,8) carbon nanotube with a single Fe@C20 inside are studied in the framework of the semiempirical approach. The scheme of a magnetic nanorelay based on cantilevered nanotubes filled with magnetic endofullerenes is elaborated. The proposed nanorelay is turned on as a result of bending of nanotubes by a magnetic force. Operational characteristics of such a nanorelay based on (8,8) and (21,21) nanotubes fully filled with Fe@C20 are estimated and compared to the ones of a nanorelay made of a (21,21) nanotube fully filled with experimentally observed (Ho3N)@C80 with the magnetic moment of 21 Bohr magnetons. Room temperature operation of (21,21) nanotube based nanorelays is shown.
△ Less
Submitted 24 April, 2010;
originally announced April 2010.
-
Interwall conductance in double-walled armchair carbon nanotubes
Authors:
N. A. Poklonski,
Nguyen Ngoc Hieu,
E. F. Kislyakov,
S. A. Vyrko,
A. I. Siahlo,
A. M. Popov,
Yu. E. Lozovik
Abstract:
The dependence of the interwall conductance on distance between walls and relative positions of walls are calculated at the low voltage by Bardeen method for (n,n)@(2n,2n) double-walled carbon nanotubes (DWCNTs) with n = 5, 6, ..., 10. The calculations show that interwall conductance does not depend on temperature (for T < 500 K) and current-voltage characteristic is linear. The conductance decrea…
▽ More
The dependence of the interwall conductance on distance between walls and relative positions of walls are calculated at the low voltage by Bardeen method for (n,n)@(2n,2n) double-walled carbon nanotubes (DWCNTs) with n = 5, 6, ..., 10. The calculations show that interwall conductance does not depend on temperature (for T < 500 K) and current-voltage characteristic is linear. The conductance decreases by 6 orders of magnitude when the interwall distance is doubled. Thus, depending on the interwall distance, DWCNTs can be used as temperature stable nanoresistors or nanocapacitors.
△ Less
Submitted 23 April, 2010;
originally announced April 2010.
-
Uniaxially deformed (5,5) carbon nanotube: Structural transitions
Authors:
N. A. Poklonski,
E. F. Kislyakov,
Nguyen Ngoc Hieu,
O. N. Bubel',
S. A. Vyrko,
A. M. Popov,
Yu. E. Lozovik
Abstract:
The Kekule structure of the ground state of (5,5) armchair carbon nanotube is revealed by semiempirical molecular orbital calculations. This structure has bonds with two different bond lengths, differing by 0.003 nm. The ground state has tripled (compared to undistorted case) translational period due to Peierls distortions. Two first order structural phase transitions controlled by the tension are…
▽ More
The Kekule structure of the ground state of (5,5) armchair carbon nanotube is revealed by semiempirical molecular orbital calculations. This structure has bonds with two different bond lengths, differing by 0.003 nm. The ground state has tripled (compared to undistorted case) translational period due to Peierls distortions. Two first order structural phase transitions controlled by the tension are predicted at zero temperature. These transitions correspond to 5% and 13% elongations of a uniaxially deformed (5,5) nanotube. The narrow gap semiconductor to metal transition is predicted at 5% elongation of the nanotube.
△ Less
Submitted 22 April, 2010;
originally announced April 2010.