Showing 1–27 of 27 results for author: Popinet, S

Buoyancy driven motion of non-coalescing inertial drops: microstructure modeling with nearest particle statistics

Authors: Nicolas Fintzi, Jean-Lou Pierson, Stéphane Popinet

Abstract: In this study, we analyze the various arrangements that droplets can form within dispersed buoyant emulsions, which we refer to as the study of microstructure. To this end, we have developed a novel algorithm that effectively prevents numerical coalescence between drops while maintaining a reasonable computational cost. This algorithm is integrated into the Volume of Fluid (VoF) method and impleme… ▽ More In this study, we analyze the various arrangements that droplets can form within dispersed buoyant emulsions, which we refer to as the study of microstructure. To this end, we have developed a novel algorithm that effectively prevents numerical coalescence between drops while maintaining a reasonable computational cost. This algorithm is integrated into the Volume of Fluid (VoF) method and implemented using the open-source code http://basilisk.fr. Subsequently, we perform Direct Numerical Simulations (DNS) of statistically steady state mono-disperse buoyant emulsion over a broad range of dimensionless parameters, including the particle volume fraction ($φ$), the Galileo number ($Ga$) and the viscosity ratio ($λ$). We make use of nearest particle statistics to quantify the microstructure properties. As predicted by Zhang et al. (2023), it is demonstrated that the second moment of the nearest particle pair distribution can effectively quantify microstructural features such as particle clusters and layers. Specifically, the findings are: (1) In moderately inertial flows ($Ga = 10$), droplets form isotropic clusters. In high inertial regimes ($Ga = 100$), non-isotropic clusters, such as horizontal layers, are more likely to form. (3) The viscosity ratio plays a significant role in determining the microstructure, with droplets that are less viscous or equally viscous as the surrounding fluid tending to form layers preferentially. Overall, our study provides a quantitative measure of the microstructure in terms of $Ga$, $φ$ and $λ$. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

The atomizing pulsed jet

Authors: Yash Kulkarni, Cesar Pairetti, Raphaël Villiers, Stéphane Popinet, Stéphane Zaleski

Abstract: Direct Numerical Simulations of the injection of a pulsed round liquid jet in a stagnant gas are performed. The Reynolds and Weber numbers and the density ratio are sufficiently large for reaching a complex high-speed atomization regime. The Weber number based on grid size is small, an indication that the simulations are very well resolved. Computations are performed using octree adaptive mesh ref… ▽ More Direct Numerical Simulations of the injection of a pulsed round liquid jet in a stagnant gas are performed. The Reynolds and Weber numbers and the density ratio are sufficiently large for reaching a complex high-speed atomization regime. The Weber number based on grid size is small, an indication that the simulations are very well resolved. Computations are performed using octree adaptive mesh refinement using the Basilisk free-code platform, down to a specified minimum grid size $Δ$. Qualitative analysis of the flow and its topology reveal a complex structure of ligaments, sheets, droplets and bubbles that evolve and interact through impacts, ligament breakup, sheet rupture and engulfment of air bubbles in the liquid. A rich gallery of images of entangled structures is produced. Most processes occurring in this type of atomization are reproduced in detail, except at the instant of thin sheet perforation or breakup. We analyze drop statistics, showing that as the grid resolution is increased, the small-scale part of the distribution does not converge, and contains a large number of droplets close in order of magnitude to the minimum grid size with a significant peak at $d = 3Δ$ . This non-convergence arises from the numerical sheet breakup effect, in which the interface becomes rough just before it breaks. The rough appearance of the interface is associated to a high-wavenumber oscillation of the curvature. To recover convergence, we apply the controlled "manifold death" numerical procedure, in which thin sheets are detected, and then pierced by fiat before they reach a set critical thickness $h_c$ that is always larger than $6 Δ$. This allows convergence of the droplet frequency above a certain critical diameter $d_c$ above and close to $h_c$. A unimodal distribution is observed in the converged range. △ Less

Submitted 14 May, 2024; v1 submitted 3 May, 2024; originally announced May 2024.

A Review of the Accuracy of Direct Numerical Simulation Tools for the Simulation of Non-Spherical Bubble Collapses

Authors: Mandeep Saini, Lucas Prouvost, Stephane Popinet, Daniel Fuster

Abstract: Numerical methods for the simulation of cavitation processes have been developed for more than 50 years. The rich variety of physical phenomena triggered by the collapse of a bubble has several applications in medicine and environmental science but requires the development of sophisticated numerical methods able to capture the presence of sharp interfaces between fluids and solid/elastic materials… ▽ More Numerical methods for the simulation of cavitation processes have been developed for more than 50 years. The rich variety of physical phenomena triggered by the collapse of a bubble has several applications in medicine and environmental science but requires the development of sophisticated numerical methods able to capture the presence of sharp interfaces between fluids and solid/elastic materials, the generation of shock waves and the development of non-spherical modes. One important challenge faced by numerical methods is the important temporal and scale separation inherent to the process of bubble collapse, where many effects become predominant during very short time lapses around the instant of minimum radius when the simulations are hardly resolved. In this manuscript, we provide a detailed discussion of the parameters controlling the accuracy of direct numerical simulation in general non-spherical cases, where a new theoretical analysis is presented to generalize existing theories on the prediction of the peak pressures reached inside the bubble during the bubble collapse. We show that the ratio between the gridsize and the minimum radius allows us to scale the numerical errors introduced by the numerical method in the estimation of different relevant quantities for a variety of initial conditions. △ Less

Submitted 28 April, 2024; originally announced April 2024.

A coupled VOF/embedded boundary method to model two-phase flows on arbitrary solid surfaces

Authors: Mathilde Tavares, Christophe Josserand, Alexandre Limare, José-Maria Lopez-Herrera, Stéphane Popinet

Abstract: We present an hybrid VOF/embedded boundary method allowing to model two-phase flows in presence of solids with arbitrary shapes. The method relies on the coupling of existing methods: a geometric Volume of fluid (VOF) method to tackle the two-phase flow and an embedded boundary method to sharply resolve arbitrary solid geometries. Coupling these approaches consistently is not trivial and we presen… ▽ More We present an hybrid VOF/embedded boundary method allowing to model two-phase flows in presence of solids with arbitrary shapes. The method relies on the coupling of existing methods: a geometric Volume of fluid (VOF) method to tackle the two-phase flow and an embedded boundary method to sharply resolve arbitrary solid geometries. Coupling these approaches consistently is not trivial and we present in detail a quad/octree spatial discretization for solving the corresponding partial differential equations. Modelling contact angle dynamics is a complex physical and numerical problem. We present a Navier-slip boundary condition compatible with the present cut cell method, validated through a Taylor-Couette test case. To impose the boundary condition when the fluid-fluid interface intersects a solid surface, a geometrical contact angle approach is developed. Our method is validated for several test cases including the spreading of a droplet on a cylinder, and the equilibrium shape of a droplet on a flat or tilted plane in 2D and 3D. The temporal evolution and convergence of the droplet spreading on a flat plane is also discussed for the moving contact line given the boundary condition (Dirichlet or Navier) used. The ability of our numerical methodology to resolve contact line statics and dynamics for different solid geometries is thus demonstrated. △ Less

Submitted 15 February, 2024; originally announced February 2024.

An Edge-based Interface Tracking (EBIT) Method for Multiphase-flows Simulation with Surface Tension

Authors: Jieyun Pan, Tian Long, Leonardo Chirco, Ruben Scardovelli, Stéphane Popinet, Stéphane Zaleski

Abstract: We present a novel Front-Tracking method, the Edge-Based Interface Tracking (EBIT) method for multiphase flow simulations. In the EBIT method, the markers are located on the grid edges and the interface can be reconstructed without storing the connectivity of the markers. This feature makes the process of marker addition or removal easier than in the traditional Front-Tracking method. The EBIT met… ▽ More We present a novel Front-Tracking method, the Edge-Based Interface Tracking (EBIT) method for multiphase flow simulations. In the EBIT method, the markers are located on the grid edges and the interface can be reconstructed without storing the connectivity of the markers. This feature makes the process of marker addition or removal easier than in the traditional Front-Tracking method. The EBIT method also allows almost automatic parallelization due to the lack of explicit connectivity. In a previous journal article we have presented the kinematic part of the EBIT method, that includes the algorithms for interface linear reconstruction and advection. Here, we complete the presentation of the EBIT method and combine the kinematic algorithm with a Navier--Stokes solver. To identify the reference phase and to distinguish ambiguous topological configurations, we introduce a new feature: the Color Vertex. For the coupling with the Navier--Stokes equations, we first calculate volume fractions from the position of the markers and the Color Vertex, then viscosity and density fields from the computed volume fractions and finally surface tension stresses with the Height-Function method. In addition, an automatic topology change algorithm is implemented into the EBIT method, making it possible the simulation of more complex flows. A two-dimensional version of the EBIT method has been implemented in the open-source Basilisk platform, and validated with five standard test cases: (1) translation with uniform velocity, (2) single vortex, (3) capillary wave, (4) Rayleigh-Taylor instability and (5) rising bubble. The results are compared with those obtained with the Volume-of-Fluid (VOF) method already implemented in Basilisk. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Breaking wave field statistics with a multilayer model

Authors: Jiarong Wu, Stéphane Popinet, Luc Deike

Abstract: The statistics of breaking wave fields is characterised within a novel multi-layer framework, which generalises the single-layer Saint-Venant system into a multi-layer and non-hydrostatic formulation of the Navier-Stokes equations. We simulate an ensemble of phase-resolved surface wave fields in physical space, where strong non-linearities including wave breaking are modelled, without surface over… ▽ More The statistics of breaking wave fields is characterised within a novel multi-layer framework, which generalises the single-layer Saint-Venant system into a multi-layer and non-hydrostatic formulation of the Navier-Stokes equations. We simulate an ensemble of phase-resolved surface wave fields in physical space, where strong non-linearities including wave breaking are modelled, without surface overturning. We extract the kinematics of wave breaking by identifying breaking fronts and their speed, for freely evolving wave fields initialised with typical wind wave spectra. The $Λ(c)$ distribution, defined as the length of breaking fronts (per unit area) moving with speed $c$ to $c+dc$ following Phillips 1985, is reported for a broad range of conditions. We recover the $Λ(c) \propto c^{-6}$ scaling without any explicit wind forcing for steep enough wave fields. A scaling of $Λ(c)$ based solely on the mean square slope and peak wave phase speed is shown to describe the modelled breaking distributions well. The modelled breaking distributions are found to be in good agreement with field measurements and the proposed scaling is consistent with previous empirical formulations. The present work paves the way for simulations of the turbulent upper ocean directly coupled with realistic breaking waves dynamics, including Langmuir turbulence, and other sub-mesoscale processes. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Comments: first submission

Bags mediated film atomization in a cough machine

Authors: Pallav Kant, César Pairetti, Youssef Saade, Stéphane Popinet, Stéphane Zaleski, Detlef Lohse

Abstract: We combine experiments and numerical computations to examine underlying fluid mechanical processes associated with bioaerosol generation during violent respiratory manoeuvres, such as coughing or sneezing. Analogous experiments performed in a cough machine -- consisting of a strong shearing airflow over a thin liquid film, allow us to illustrate the changes in film topology as it disintegrates int… ▽ More We combine experiments and numerical computations to examine underlying fluid mechanical processes associated with bioaerosol generation during violent respiratory manoeuvres, such as coughing or sneezing. Analogous experiments performed in a cough machine -- consisting of a strong shearing airflow over a thin liquid film, allow us to illustrate the changes in film topology as it disintegrates into small droplets. We identify that aerosol generation during the shearing of the liquid film is mediated by the formation of inflated bag-like structures. The breakup of these bags is triggered by the appearance of retracting holes that puncture the bag surface. Consequently, the cascade from inflated bags to droplets is primarily controlled by the dynamics and stability of liquid rims bounding these retracting holes. We also reveal the stabilizing role of fluid viscosity that eventually leads to the generation of smaller droplets. △ Less

Submitted 6 July, 2023; v1 submitted 28 February, 2022; originally announced February 2022.

A hybrid level-set / embedded boundary method applied to solidification-melt problems

Authors: A. Limare, S. Popinet, C. Josserand, Z. Xue, A. Ghigo

Abstract: In this paper, we introduce a novel way to represent the interface for two-phase flows with phase change. We combine a level-set method with a Cartesian embedded boundary method and take advantage of both. This is part of an effort to obtain a numerical strategy relying on Cartesian grids allowing the simulation of complex boundaries with possible change of topology while retaining a high-order re… ▽ More In this paper, we introduce a novel way to represent the interface for two-phase flows with phase change. We combine a level-set method with a Cartesian embedded boundary method and take advantage of both. This is part of an effort to obtain a numerical strategy relying on Cartesian grids allowing the simulation of complex boundaries with possible change of topology while retaining a high-order representation of the gradients on the interface and the capability of properly applying boundary conditions on the interface. This leads to a two-fluid conservative second-order numerical method. The ability of the method to correctly solve Stefan problems, onset dendrite growth with and without anisotropy is demonstrated through a variety of test cases. Finally, we take advantage of the two-fluid representation to model a Rayleigh--Bénard instability with a melting boundary. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Revisiting wind wave growth with fully-coupled direct numerical simulations

Authors: Jiarong Wu, Stéphane Popinet, Luc Deike

Abstract: We investigate wind wave growth by direct numerical simulations solving for the two phase Navier-Stokes equations. We consider ratio of the wave speed $c$ to wind friction velocity $u_*$ from $c/u_*=$ 2 to 8, i.e. in the slow to intermediate wave regime; and initial wave steepness $ak$ from 0.1 to 0.3; the two being varied independently. The turbulent wind and the travelling, nearly monochromatic… ▽ More We investigate wind wave growth by direct numerical simulations solving for the two phase Navier-Stokes equations. We consider ratio of the wave speed $c$ to wind friction velocity $u_*$ from $c/u_*=$ 2 to 8, i.e. in the slow to intermediate wave regime; and initial wave steepness $ak$ from 0.1 to 0.3; the two being varied independently. The turbulent wind and the travelling, nearly monochromatic waves are fully coupled without any subgrid scale models. The novel fully-coupled approach captures the simultaneous evolution of the wave amplitude and shape, together with the underwater boundary layer (drift current), up to wave breaking. The wave energy growth computed from the time-dependent rms surface elevation is in quantitative agreement with that computed from the extracted surface pressure distribution, which confirms the leading role of the pressure forcing for finite amplitude gravity waves. The phase shift and the amplitude of the principal mode of surface pressure distribution are systematically reported, to provide direct evidence for possible wind wave growth theories. For the momentum and energy fluxes, we find that the wave form drag force is not a strong function of wave age but closely related to wave steepness. The time evolution of the rms steepness and the wave form drag suggests that there is an effect of the history of wind wave coupling. The normalised wave growth rate we obtain agrees with previous experimental and numerical studies. We make an effort to clarify various commonly-adopted underlying assumptions, and to reconcile the scattering of the data between different previous theoretical, numerical, and experimental results, as we revisit this longstanding problem with new numerical evidence. △ Less

Submitted 6 November, 2022; v1 submitted 7 February, 2022; originally announced February 2022.

Comments: Published version: major revision to include discussion on steep waves and micro-breaking

Journal ref: Journal of Fluid Mechanics, 951, A18 (2022)

Manifold death: a Volume of Fluid implementation of controlled topological changes in thin sheets by the signature method

Authors: Leonardo Chirco, Jacob Maarek, Stephane Popinet, Stephane Zaleski

Abstract: A well-known drawback of the Volume-Of-Fluid (VOF) method is that the breakup of thin liquid films or filaments is mainly caused by numerical aspects rather than by physical ones. The rupture of thin films occurs when their thickness reaches the order of the grid size and by refining the grid the breakup events are delayed. When thin filaments rupture, many droplets are generated due to the mass c… ▽ More A well-known drawback of the Volume-Of-Fluid (VOF) method is that the breakup of thin liquid films or filaments is mainly caused by numerical aspects rather than by physical ones. The rupture of thin films occurs when their thickness reaches the order of the grid size and by refining the grid the breakup events are delayed. When thin filaments rupture, many droplets are generated due to the mass conserving properties of VOF. Thus, the numerical character of the breakup does not allow obtaining the desired convergence of the droplet size distribution under grid refinement. In this work, we present a novel algorithm to detect and perforate thin structures. First, thin films or ligaments are identified by taking quadratic moments of an indicator obtained from the volume fraction. A multiscale approach allows us to choose the critical film thickness independently of the mesh resolution. Then, the breakup is induced by making holes in the films before their thickness reaches the grid size. We show that the method improves the convergence upon grid refinement of the droplets size distribution and of enstrophy. △ Less

Submitted 24 June, 2022; v1 submitted 10 November, 2021; originally announced November 2021.

High-resolution direct simulation of deep water breaking waves: transition to turbulence, bubbles and droplet production

Authors: Wouter Mostert, Stéphane Popinet, Luc Deike

Abstract: [Abridged]We present high-resolution three-dimensional direct numerical simulations of breaking waves solving the two-phase Navier-Stokes equations. We investigate the role of the Reynolds and Bond numbers on the energy, bubble and droplet statistics of strong plunging breakers, and explore the asymptotic regimes at high Reynolds and Bond numbers to be compared with laboratory breaking waves. Ener… ▽ More [Abridged]We present high-resolution three-dimensional direct numerical simulations of breaking waves solving the two-phase Navier-Stokes equations. We investigate the role of the Reynolds and Bond numbers on the energy, bubble and droplet statistics of strong plunging breakers, and explore the asymptotic regimes at high Reynolds and Bond numbers to be compared with laboratory breaking waves. Energetically, the breaking wave transitions from laminar to three-dimensional turbulent flow on a timescale that depends on the turbulent Reynolds number up to a limiting value of $Re_λ\sim 100$, consistent with the mixing transition observed in other canonical turbulent flows. We characterize the role of capillary effects on the impacting jet and ingested main cavity shape and subsequent fragmentation process. We confirm two regimes in the bubble size distribution, separated by the Hinze scale $r_H$. We extend the buoyant-energetic scaling of Deike et al. (2016) to account for the cavity shape and its scale separation from the Hinze scale. We show resolved bubbles up to one order of magnitude below the Hinze scale and observe a good collapse of the numerical data compared to laboratory breaking waves (Deane and Stokes 2002). We resolve droplet statistics at high Bond number and our data show good agreement with recent experiments (Erinin et al., 2009) in various statistics. We discuss velocity distributions for the droplets, finding ejection velocities up to four times the phase speed of the wave, which are produced during the most intense splashing events of the breaking process. △ Less

Submitted 25 January, 2022; v1 submitted 9 March, 2021; originally announced March 2021.

Comments: 38 pages, 16 figures

Dynamic wetting failure in curtain coating by the Volume-of-Fluid method

Authors: Tomas Fullana, Stéphane Zaleski, Stéphane Popinet

Abstract: In this paper we investigate dynamic wetting in the curtain coating configuration. The two-phase Navier-Stokes equations are solved by a Volume-of-Fluid method on an adaptive Cartesian mesh. We introduce the Navier boundary condition to regularize the solution at the triple point and remove the implicit numerical slip induced by the cell-centered interface advection. We use a constant contact angl… ▽ More In this paper we investigate dynamic wetting in the curtain coating configuration. The two-phase Navier-Stokes equations are solved by a Volume-of-Fluid method on an adaptive Cartesian mesh. We introduce the Navier boundary condition to regularize the solution at the triple point and remove the implicit numerical slip induced by the cell-centered interface advection. We use a constant contact angle to describe the dynamic contact line. The resolution of the governing equations allows us to predict the substrate velocity at which wetting failure occurs. The model predictions are compared with prior computations and experimental observations. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Comments: 13 pages, 11 figures, post-review version, under consideration for publication in "European Physical Journal Special Topics"

Short-term oscillation and falling dynamics for a water drop drip** in quiescent air

Authors: Bo Zhang, Pei-Hsun Tsai, An-Bang Wang, Stéphane Popinet, Stéphane Zaleski, Yue Ling

Abstract: The short-term transient falling dynamics of a drip** water drop in quiescent air has been investigated through both simulation and experiment. The focus is on the short term behavior and the time range considered covers about eight dominant second-mode oscillations of the drop after it is formed. Due to the small fluid inertia the growth of the drop is quasi-static and is well captured by the s… ▽ More The short-term transient falling dynamics of a drip** water drop in quiescent air has been investigated through both simulation and experiment. The focus is on the short term behavior and the time range considered covers about eight dominant second-mode oscillations of the drop after it is formed. Due to the small fluid inertia the growth of the drop is quasi-static and is well captured by the static pendant drop theory. Nevertheless, the pinching dynamics and the resulting post-formation state of the drop trigger a nonlinear oscillation when the drop falls. The initial shape of the drop when it is just formed is decomposed into spherical harmonic modes. The pinching dynamics such as interface overturning introduces small-scale variation on the drop contour, which in turn contributes to the finite amplitudes of the higher-order modes. Furthermore, the initial kinetic energy when the droplet is just formed is as important as the initial surface energy contained in the drop shape, and is found to amplify the initial oscillation amplitude and to induce a phase shift in the oscillation of all the modes. By incorporating both the initial surface and kinetic energy, the linear model for a free drop oscillation yields very good predictions for the second and third modes. The mode amplitude spectra show both the primary frequencies that are consistent with the Lamb's theory and the secondary frequencies arising from different modes due to nonlinear inter-mode coupling. The complex transient flow inside and outside the drop is induced by the interaction between the falling motion and the nonlinear oscillation. The streamlines indicate that the internal flow is substantially different from the Hill vortex for a falling drop without oscillation. The temporal evolutions of both the internal flow and the wake morphology follow the dominant second oscillation mode. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Journal ref: Physical Review Fluids 4, (2019) 123604

Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions

Authors: Bo Zhang, Stephane Popinet, Yue Ling

Abstract: In the present study, detailed numerical simulations are performed to investigate the primary breakup of a gasoline surrogate jet under non-evaporative "Spray G" operating conditions. The Spray G injector and operating conditions, developed by the Engine Combustion Network (ECN), represent the early phase of spray-guided gasoline injection. To focus the computational resources on resolving the pri… ▽ More In the present study, detailed numerical simulations are performed to investigate the primary breakup of a gasoline surrogate jet under non-evaporative "Spray G" operating conditions. The Spray G injector and operating conditions, developed by the Engine Combustion Network (ECN), represent the early phase of spray-guided gasoline injection. To focus the computational resources on resolving the primary breakup, simplifications have been made on the injector geometry. The effect of the internal flow on the primary breakup is modeled by specifying a nonzero injection angle at the inlet. The nonzero injection angle results in an increase of the jet penetration speed and also a deflection of the liquid jet. A parametric study on the injection angle is performed, and the numerical results are compared to the experimental data to identify the injection angle that best represents the Spray G conditions. The nonzero injection angle introduces an azimuthally non-uniform velocity in the liquid jet, which in turn influences the instability development on the jet surfaces and also the deformation and breakup of the jet head. The asymmetric primary breakup dynamics eventually lead to an azimuthal variation of droplet size distributions. The number of droplets varies significantly with the azimuthal angle, but interestingly, the probability density functions (PDF) of droplet size for different azimuthal angles collapse to a self-similar profile. Analysis has also been conducted to estimate the percentage and statistics of the tiny droplets that are under resolved in the present simulation. The PDF of the azimuthal angle is also presented, which is also shown to exhibit a self-similar form that varies little over time. Finally, a model is developed to predict the droplet number as a function of droplet diameter, azimuthal angle where a droplet is located, and time. △ Less

Submitted 28 May, 2020; v1 submitted 17 March, 2020; originally announced March 2020.

Direct Numerical Simulation of bubble-induced turbulence at high Reynolds numbers

Authors: Alessio Innocenti, Alice Jaccod, Stéphane Popinet, Sergio Chibbaro

Abstract: We report on a investigation of turbulent bubbly flows. Bubbles of a size larger than the dissipative scale, cannot be treated as point-wise inclusions, and generate important hydrodynamic fields in the carrier fluid when in motion. Furthermore, when the volume fraction of bubbles is large enough, the bubble motion may induce a collective agitation due to hydrodynamic interactions which display so… ▽ More We report on a investigation of turbulent bubbly flows. Bubbles of a size larger than the dissipative scale, cannot be treated as point-wise inclusions, and generate important hydrodynamic fields in the carrier fluid when in motion. Furthermore, when the volume fraction of bubbles is large enough, the bubble motion may induce a collective agitation due to hydrodynamic interactions which display some turbulent-like features. We tackle this complex phenomenon numerically, performing direct numerical simulations (DNS) with a Volume-of-fluid (VOF) method. In the first part of the work, we perform both 2D and 3D tests in order to determine appropriate numerical and physical parameters. We then carry out a highly-resolved simulation of a 3D bubble column, with a configuration and physical parameters similar to those used in laboratory experiments. This is the largest simulation attempted for such a configuration and is possible only thanks to adaptive grid refinement. Results are compared both with experiments and previous coarse-mesh numerical simulations. In particular, the one-point Probability Density Function (PDF) of the liquid velocity fluctuations is in good quantitative agreement with experiments, notably in the vertical direction, although more extreme events are sampled in the present configuration. The spectra of the liquid kinetic energy show a clear $k^{-3}$ scaling. The mechanisms underlying the energy transfer and notably the possible presence of a cascade are unveiled by a local scale-by-scale analysis in the physical space. The comparison with previous simulations indicate to what extent simulations not fully resolved may yet give correct results, from a statistical point of view. △ Less

Submitted 23 September, 2020; v1 submitted 6 February, 2020; originally announced February 2020.

Comments: Manuscript fully revised

Journal ref: Journal of Fluid Mechanics 918 (2021)

Planar Jet Strip** of Liquid Coatings: Numerical Studies

Authors: Wojciech Aniszewski, Stéphane Zaleski, Stéphane Popinet, Youssef Saade

Abstract: In this paper, we present a detailed example of numerical study of flm formation in the context of metal coating. Subsequently we simulate wi** of the film by a planar jet. The simulations have been performed using Basilisk, a grid-adapting, strongly optimized code. Mesh adaptation allows for arbitrary precision in relevant regions such as the contact line or the liquid-air impact zone, while co… ▽ More In this paper, we present a detailed example of numerical study of flm formation in the context of metal coating. Subsequently we simulate wi** of the film by a planar jet. The simulations have been performed using Basilisk, a grid-adapting, strongly optimized code. Mesh adaptation allows for arbitrary precision in relevant regions such as the contact line or the liquid-air impact zone, while coarse grid is applied elsewhere. This, as the results indicate, is the only realistic approach for a numerical method to cover the wide range of necessary scales from the predicted film thickness (tens of microns) to the domain size (meters). The results suggest assumptions of laminar flow inside the film are not justified for heavy coats (liquid zinc). As for the wi**, our simulations supply a great amount of instantaneous results concerning initial film atomization as well as film thickness. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Comments: 20 pages, 20 figures

A phase inversion benchmark for multiscale multiphase flows

Authors: J. -L. Estivalezes, W. Aniszewski, F. Auguste, Y. Ling, L. Osmar, J. -P. Caltagirone, L. Chirco, A. Pedrono, S. Popinet, A. Berlemont, J. Magnaudet, T. Menard, S. Vincent, S. Zaleski

Abstract: A series of benchmarks based on the physical situation of "phase inversion" between two immiscible liquids is presented. These benchmarks aim at progressing toward the direct numerical simulation of two-phase flows. Several CFD codes developed in French laboratories and using either Volume-of-Fluid or Level-Set interface tracking methods are used to provide physical solutions of the benchmarks, co… ▽ More A series of benchmarks based on the physical situation of "phase inversion" between two immiscible liquids is presented. These benchmarks aim at progressing toward the direct numerical simulation of two-phase flows. Several CFD codes developed in French laboratories and using either Volume-of-Fluid or Level-Set interface tracking methods are used to provide physical solutions of the benchmarks, convergence studies and code comparisons. Two typical configurations are retained, with integral scale Reynolds numbers of 13.700 and 433.000, respectively. The physics of the problem are probed through macroscopic quantities such as potential and kinetic energies, or enstrophy. In addition, scaling laws for the temporal decay of the kinetic energy are derived to check the physical relevance of the simulations. Finally the droplet size distribution is probed. Additional test problems are also reported to estimate the influence of viscous effects in the vicinity of the interface. △ Less

Submitted 17 October, 2021; v1 submitted 6 June, 2019; originally announced June 2019.

Comments: 35 pages, 35 figures, third revision submitted to J. Comput. Phys

An adaptive solver for viscoelastic incompressible two-phase problems applied to the study of the splashing of slightly viscoelastic droplets

Authors: J. M. Lopez-Herrera, S. Popinet, A. A. Castrejon-Pita

Abstract: We propose an adaptive numerical solver for the study of viscoelastic 2D two-phase flows using the volume-of-fluid method. The scheme uses the robust log conformation tensor technique of Fattal & Kupferman (2004,2005} combined with the time-split scheme proposed by Hao & Pan (2007}. The use of this time-split scheme has been proven to increase the stability of the numerical computation of two-phas… ▽ More We propose an adaptive numerical solver for the study of viscoelastic 2D two-phase flows using the volume-of-fluid method. The scheme uses the robust log conformation tensor technique of Fattal & Kupferman (2004,2005} combined with the time-split scheme proposed by Hao & Pan (2007}. The use of this time-split scheme has been proven to increase the stability of the numerical computation of two-phase flows. We show that the adaptive computational technique can be used to simulate viscoelastic flows efficiently. The solver is coded using the open-source libraries provided by the \basilisk \cite{Basilisk} platform. In particular, the method is implemented for Oldroyd-B type viscoelastic fluids and related models (FENE-P and FENE-CR). The numerical scheme is then used to study the splashing of weakly viscoelastic drops. The solvers and tests of this work are freely available on the Basilisk web site △ Less

Submitted 29 June, 2018; originally announced July 2018.

Breakup of finite-size liquid filaments: Transition from no-breakup to breakup including substrate effects

Authors: A. Dziedzic, M. Nakrani, B. Ezra, M. Syed, S. Popinet, S. Afkhami

Abstract: This work studies the breakup of finite-size liquid filaments, when also including substrate effects, using direct numerical simulations. The study focuses on the effects of three parameters: Ohnesorge number, the ratio of the viscous forces to inertial and surface tension forces, the liquid filament aspect ratio, and where there is a substrate, a measure of the fluid slip on the substrate, i.e. s… ▽ More This work studies the breakup of finite-size liquid filaments, when also including substrate effects, using direct numerical simulations. The study focuses on the effects of three parameters: Ohnesorge number, the ratio of the viscous forces to inertial and surface tension forces, the liquid filament aspect ratio, and where there is a substrate, a measure of the fluid slip on the substrate, i.e. slip length. Through these parameters, it is determined whether a liquid filament breaks up during the evolution toward its final equilibrium state. Three scenarios are identified: a collapse into a single droplet, the breakup into one or multiple droplets, and recoalescence into a single droplet after the breakup (or even possibly another breakup after recoalescence). The results are compared with the ones available in the literature for free-standing liquid filaments. The findings show that the presence of the substrate promotes breakup of the filament. The effect of the degree of slip on the breakup is also discussed. The parameter domain regions are comprehensively explored when including the slip effects. An experimental case is also carried out to illustrate the collapse and breakup of a finite-size silicon oil filament supported on a substrate, showcasing a critical length of the breakup in a physical configuration. Finally, direct numerical simulations reveal striking new details into the breakup pattern for low Ohnesorge numbers, where the dynamics are fast and the experimental imaging is not available; our results therefore significantly extend the range of Ohnesorge number over which filament breakup has been considered. △ Less

Submitted 1 August, 2018; v1 submitted 3 May, 2018; originally announced May 2018.

Transition in a numerical model of contact line dynamics and forced dewetting

Authors: S. Afkhami, J. Buongiorno, A. Guion, S. Popinet, Y. Saade, R. Scardovelli, S. Zaleski

Abstract: We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, d… ▽ More We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, dynamic simulations can proceed without any explicit additional numerical procedure. We investigate angles from $15^\circ$ to $110^\circ$ and capillary numbers from $0.00085$ to $0.2$ where the mesh size $Δ$ is varied in the range of $0.0035$ to $0.06$ of the capillary length $l_c$. To interpret the results, we use Cox's theory which involves a microscopic distance $r_m$ and a microscopic angle $θ_e$. In the numerical case, the equivalent of $θ_e$ is the angle $θ_Δ$ and we find that Cox's theory also applies. We introduce the scaling factor or gauge function $φ$ so that $r_m = Δ/φ$ and estimate this gauge function by comparing our numerics to Cox's theory. The comparison provides a direct assessment of the agreement of the numerics with Cox's theory and reveals a critical feature of the numerical treatment of contact line dynamics: agreement is poor at small angles while it is better at large angles. This scaling factor is shown to depend only on $θ_Δ$ and the viscosity ratio $q$. In the case of small $θ_e$, we use the prediction by Eggers [Phys. Rev. Lett., vol. 93, pp 094502, 2004] of the critical capillary number for the Landau-Levich-Derjaguin forced dewetting transition. We generalize this prediction to large $θ_e$ and arbitrary $q$ and express the critical capillary number as a function of $θ_e$ and $r_m$. An analogy can be drawn between $r_m$ and the numerical slip length. △ Less

Submitted 27 October, 2018; v1 submitted 20 March, 2017; originally announced March 2017.

Comments: This version of the paper includes the corrections indicated in Ref. [1]

Journal ref: Journal of Computational Physics, Volume 374, Pages 1061-1093, 2018

Modeling rain-driven overland flow: empirical versus analytical friction terms in the shallow water approximation

Authors: G. Kirstetter, J. Hu, O. Delestre, F. Darboux, P. -Y. Lagrée, S. Popinet, J. -M. Fullana, C. Josserand

Abstract: Modeling and simulating overland flow fed by rainfall is a common issue in watershed surface hydrology. Modelers have to choose among various friction models when defining their simulation framework. The purpose of this work is to compare the simulation quality for the Manning, Darcy-Weisbach, and Poiseuille friction models on the simple case of a constant rain on a thin experimental flume. Result… ▽ More Modeling and simulating overland flow fed by rainfall is a common issue in watershed surface hydrology. Modelers have to choose among various friction models when defining their simulation framework. The purpose of this work is to compare the simulation quality for the Manning, Darcy-Weisbach, and Poiseuille friction models on the simple case of a constant rain on a thin experimental flume. Results show that the usual friction law of Manning is not suitable for this type of flow. The Poiseuille friction model gave the best results both on the flux at the outlet and the velocity and depth profile along the flume. The Darcy-Weisbach model shows good results for laminar flow. Additional testing should be carried out for turbulent cases. △ Less

Submitted 15 September, 2016; originally announced September 2016.

Comments: in Journal of Hydrology 2016

Droplet migration in a Hele-Shaw cell: Effect of the lubrication film on the droplet dynamics

Authors: Yue Ling, Jose-Maria Fullana, Stéphane Popinet, Christophe Josserand

Abstract: Droplet migration in a Hele--Shaw cell is a fundamental multiphase flow problem which is crucial for many microfluidics applications. We focus on the regime at low capillary number and three-dimensional direct numerical simulations are performed to investigate the problem. In order to reduce the computational cost, an adaptive mesh is employed and high mesh resolution is only used near the interfa… ▽ More Droplet migration in a Hele--Shaw cell is a fundamental multiphase flow problem which is crucial for many microfluidics applications. We focus on the regime at low capillary number and three-dimensional direct numerical simulations are performed to investigate the problem. In order to reduce the computational cost, an adaptive mesh is employed and high mesh resolution is only used near the interface. Parametric studies are performed on the droplet horizontal radius and the capillary number. For droplets with an horizontal radius larger than half the channel height the droplet overfills the channel and exhibits a pancake shape. A lubrication film is formed between the droplet and the wall and particular attention is paid to the effect of the lubrication film on the droplet velocity. The computed velocity of the pancake droplet is shown to be lower than the average inflow velocity, which is in agreement with experimental measurements. The numerical results show that both the strong shear induced by the lubrication film and the three-dimensional flow structure contribute to the low mobility of the droplet. In this low-migration-velocity scenario the interfacial flow in the droplet reference frame moves toward the rear on the top and reverses direction moving to the front from the two side edges. The velocity of the pancake droplet and the thickness of the lubrication film are observed to decrease with capillary number. The droplet velocity and its dependence on capillary number cannot be captured by the classic Hele--Shaw equations, since the depth-averaged approximation neglects the effect of the lubrication film. △ Less

Submitted 18 May, 2016; v1 submitted 26 January, 2016; originally announced January 2016.

Droplet in micro-channels: A numerical approach using an adaptive two phase flow solver

Authors: Jose-Maria Fullana, Yue Ling, Stéphane Popinet, Christophe Josserand

Abstract: We propose a numerical approach to study the mechanics of a flowing bubble in a constraint micro channel. Using an open source two phase flow solver (Gerris, gfs.sourceforge.net) we compute solutions of the bubble dynamics (i.e. shape and terminal velocity) induced by the interaction between the bubble movement, the Laplace pressure variation, and the lubrication film near the channel wall. Quanti… ▽ More We propose a numerical approach to study the mechanics of a flowing bubble in a constraint micro channel. Using an open source two phase flow solver (Gerris, gfs.sourceforge.net) we compute solutions of the bubble dynamics (i.e. shape and terminal velocity) induced by the interaction between the bubble movement, the Laplace pressure variation, and the lubrication film near the channel wall. Quantitative and qualitative results are presented and compared against both theory and experimental data for small Capillary numbers. We discuss the technical issues of explicit integration methods on small Capillary numbers computations, and the possibility of adding Van der Walls forces to give a more precise picture of the Droplet-based microfluidic problem. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: in 1st Pan-American Congress on Computational Mechanics - PANACM 2015, 2015, Buenos Aires, Argentina

Scaling properties of viscous fingering

Authors: Bertrand Lagrée, Stéphane Zaleski, Igor Bondino, Christophe Josserand, Stéphane Popinet

Abstract: We present a study of viscous fingering using the Volume Of Fluid method and a central injection geometry, assuming a Laplacian field and a simple surface tension law. As in experiments we see branched structures resulting from the Saffman-Taylor instability. We find that the area $A$ of a viscous-fingering cluster varies as a simple power law $A \sim L^α$ of its interface length $L$. Our results… ▽ More We present a study of viscous fingering using the Volume Of Fluid method and a central injection geometry, assuming a Laplacian field and a simple surface tension law. As in experiments we see branched structures resulting from the Saffman-Taylor instability. We find that the area $A$ of a viscous-fingering cluster varies as a simple power law $A \sim L^α$ of its interface length $L$. Our results are compared to previously published simulations in which the viscosity of the invading fluid is vanishing. We find differences in exponent $α$ and in the appearance of detached droplets and bubbles. △ Less

Submitted 31 October, 2014; originally announced October 2014.

Continuum simulation of the discharge of the granular silo: a validation test for the mu(I)-visco-plastic flow law

Authors: L. Staron, P. -Y. Lagrée, S. Popinet

Abstract: Using both a continuum Navier-Stokes solver, with the mu(I)-flow-law implemented to model the viscous behavior, and the discrete Contact Dynamics algorithm, the discharge of granular silos is simulated in two dimensions from the early stages of the discharge until complete release of the material. In both cases, the Beverloo scaling is recovered. We first do not attempt quantitative comparison, bu… ▽ More Using both a continuum Navier-Stokes solver, with the mu(I)-flow-law implemented to model the viscous behavior, and the discrete Contact Dynamics algorithm, the discharge of granular silos is simulated in two dimensions from the early stages of the discharge until complete release of the material. In both cases, the Beverloo scaling is recovered. We first do not attempt quantitative comparison, but focus on the qualitative behavior of velocity and pressure at different locations in the flow. A good agreement is obtained in the regions of rapid flows, while areas of slow creep are not entirely captured by the continuum model. The pressure field shows a general good agreement. The evolution of the free surface implies differences, however, the bulk deformation is essentially identical in both approaches. The influence of the parameters of the mu(I)-flow-law is systematically investigated, showing the importance of the dependence on the inertial number I to achieve quantitative agreement between continuum and discrete discharge. The general ability of the continuum model to reproduce qualitatively the granular behavior is found to be very encouraging. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: 12 pages, 15 figures

The granular silo as a continuum plastic flow: the hour-glass vs the clepsydra

Authors: Lydie Staron, Pierre-Yves Lagrée, Stéphane Popinet

Abstract: The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends… ▽ More The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends on the height of fluid left in the container, the discharge rate of granular silos is constant. Implementing a plastic rheology in a 2D Navier-Stokes solver (following the mu(I)-rheology or a constant friction), we simulate the continuum counterpart of the granular silo. Doing so, we obtain a constant flow rate during the discharge and recover the Beverloo scaling independently of the initial filling height of the silo. We show that lowering the value of the coefficient of friction leads to a transition toward a different behavior, similar to that of a viscous fluid, and where the filling height becomes active in the discharge process. The pressure field shows that large enough values of the coefficient of friction ($\simeq$ 0.3) allow for a low-pressure cavity to form above the outlet, and can thus explain the Beverloo scaling. In conclusion, the difference between the discharge of a hourglass and a clepsydra seems to reside in the existence or not of a plastic yield stress. △ Less

Submitted 26 November, 2012; originally announced November 2012.

Comments: 6 pages, 6 figures

Journal ref: Phys. Fluids 24, 103301 (2012)

Von Kármán Vortex Street within an Impacting Drop

Authors: Marie-Jean Thoraval, Kohsei Takehara, Takeharu Goji Etoh, Stephane Popinet, Pascal Ray, Christophe Josserand, Stephane Zaleski, Sigurdur Thoroddsen

Abstract: The splashing of a drop impacting onto a liquid pool produces a range of different sized micro-droplets. At high impact velocities, the most significant source of these droplets is a thin liquid jet emerging at the start of the impact from the neck that connects the drop to the pool. We use ultra-high-speed video imaging in combination with high-resolution numerical simulations to show how the eje… ▽ More The splashing of a drop impacting onto a liquid pool produces a range of different sized micro-droplets. At high impact velocities, the most significant source of these droplets is a thin liquid jet emerging at the start of the impact from the neck that connects the drop to the pool. We use ultra-high-speed video imaging in combination with high-resolution numerical simulations to show how the ejecta gives way to irregular splashing. At higher Reynolds number, its base becomes unstable, shedding vortex rings into the liquid from the free surface in an axisymmetric von Kármán vortex street, thus breaking the ejecta sheet as it forms. △ Less

Submitted 29 February, 2012; originally announced February 2012.

Comments: 5 pages, 4 figure, 2 supplemental videos

Journal ref: Phys. Rev. Lett. 108, 264506 (2012)