-
Strong Charge-Photon Coupling in Planar Germanium Enabled by Granular Aluminium Superinductors
Authors:
Marián Janík,
Kevin Roux,
Carla Borja Espinosa,
Oliver Sagi,
Abdulhamid Baghdadi,
Thomas Adletzberger,
Stefano Calcaterra,
Marc Botifoll,
Alba Garzón Manjón,
Jordi Arbiol,
Daniel Chrastina,
Giovanni Isella,
Ioan M. Pop,
Georgios Katsaros
Abstract:
High kinetic inductance superconductors are gaining increasing interest for the realisation of qubits, amplifiers and detectors. Moreover, thanks to their high impedance, quantum buses made of such materials enable large zero-point fluctuations of the voltage, boosting the coupling rates to spin and charge qubits. However, fully exploiting the potential of disordered or granular superconductors is…
▽ More
High kinetic inductance superconductors are gaining increasing interest for the realisation of qubits, amplifiers and detectors. Moreover, thanks to their high impedance, quantum buses made of such materials enable large zero-point fluctuations of the voltage, boosting the coupling rates to spin and charge qubits. However, fully exploiting the potential of disordered or granular superconductors is challenging, as their inductance and, therefore, impedance at high values are difficult to control. Here we have integrated a granular aluminium resonator, having a characteristic impedance exceeding the resistance quantum, with a germanium double quantum dot and demonstrate strong charge-photon coupling with a rate of $g_\text{c}/2π= (566 \pm 2)$ MHz. This was achieved due to the realisation of a wireless ohmmeter, which allows \emph{in situ} measurements during film deposition and, therefore, control of the kinetic inductance of granular aluminium films. Reproducible fabrication of circuits with impedances (inductances) exceeding 13 k$Ω$ (1 nH per square) is now possible. This broadly applicable method opens the path for novel qubits and high-fidelity, long-distance two-qubit gates.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Granular Aluminum Parametric Amplifier for Low-Noise Measurements in Tesla Fields
Authors:
Nicolas Zapata,
Ivan Takmakov,
Simon Günzler,
Ameya Nambisan,
Dennis Rieger,
Thomas Reisinger,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
Josephson junction parametric amplifiers have become essential tools for microwave quantum circuit readout with minimal added noise. Even after improving at an impressive rate in the last decade, they remain vulnerable to magnetic field, which limits their use in many applications such as spin qubits, Andreev and molecular magnet devices, dark matter searches, etc. Kinetic inductance materials, su…
▽ More
Josephson junction parametric amplifiers have become essential tools for microwave quantum circuit readout with minimal added noise. Even after improving at an impressive rate in the last decade, they remain vulnerable to magnetic field, which limits their use in many applications such as spin qubits, Andreev and molecular magnet devices, dark matter searches, etc. Kinetic inductance materials, such as granular aluminum (grAl), offer an alternative source of non-linearity with innate magnetic field resilience. We present a non-degenerate amplifier made of two coupled grAl resonators resilient to in-plane magnetic field up to 1 T. It offers 20 dB of gain close to the quantum limit of added noise, with a gain-bandwidth product of 28 MHz and -110 dBm input saturation power.
△ Less
Submitted 2 April, 2024; v1 submitted 15 March, 2024;
originally announced March 2024.
-
Photon-mediated long range coupling of two Andreev level qubits
Authors:
L. Y. Cheung,
R. Haller,
A. Kononov,
C. Ciaccia,
J. H. Ungerer,
T. Kanne,
J. Nygård,
P. Winkel,
T. Reisinger,
I. M. Pop,
A. Baumgartner,
C. Schönenberger
Abstract:
In a superconducting weak link, the supercurrent is carried by Andreev bound states (ABSs) formed by the phase-coherent reflection of electrons and their time-reversed partners. A single, highly transmissive ABS can serve as an ideal, compact two-level system, due to a potentially large energy difference to the next ABS. While the coherent manipulation of such Andreev levels qubits (ALQs) has been…
▽ More
In a superconducting weak link, the supercurrent is carried by Andreev bound states (ABSs) formed by the phase-coherent reflection of electrons and their time-reversed partners. A single, highly transmissive ABS can serve as an ideal, compact two-level system, due to a potentially large energy difference to the next ABS. While the coherent manipulation of such Andreev levels qubits (ALQs) has been demonstrated, a long-range coupling between two ALQs, necessary for advanced qubit architectures, has not been achieved, yet. Here, we demonstrate a coherent remote coupling between two ALQs, mediated by a microwave photon in a novel superconducting microwave cavity coupler. The latter hosts two modes with different coupling rates to an external port. This allows us to perform fast readout of each qubit using the strongly coupled mode, while the weakly coupled mode is utilized to mediate the coupling between the qubits. When both qubits are tuned into resonance with the latter mode, we find excitation spectra with avoided-crossings, in very good agreement with the Tavis-Cummings model. Based on this model, we identify highly entangled two-qubit states for which the entanglement is mediated over a distance of six millimeters. This work establishes ALQs as compact and scalable solid-state qubits.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Solomon equations for qubit and two-level systems: Insights into non-Poissonian quantum jumps
Authors:
Martin Spiecker,
Andrei I. Pavlov,
Alexander Shnirman,
Ioan M. Pop
Abstract:
We measure and model the combined relaxation of a qubit coupled to a discrete two-level system~(TLS) environment, also known as the central spin model. If the TLSs are much longer-lived than the qubit, non-exponential relaxation and non-Poissonian quantum jumps can be observed. In the limit of large numbers of TLSs, the relaxation is likely to follow a power law, which we confirm with measurements…
▽ More
We measure and model the combined relaxation of a qubit coupled to a discrete two-level system~(TLS) environment, also known as the central spin model. If the TLSs are much longer-lived than the qubit, non-exponential relaxation and non-Poissonian quantum jumps can be observed. In the limit of large numbers of TLSs, the relaxation is likely to follow a power law, which we confirm with measurements on a superconducting fluxonium qubit. Moreover, the observed relaxation and quantum jump statistics are described by the Solomon equations, for which we present a derivation starting from the general Lindblad equation for an arbitrary number of TLSs. We also show how to reproduce the non-Poissonian quantum jump statistics using a diffusive stochastic Schrödinger equation. The fact that the measured quantum jump statistics can be reproduced by the Solomon equations, which ignore the quantum measurement backaction, hints at a quantum-to-classical transition.
△ Less
Submitted 27 May, 2024; v1 submitted 13 July, 2023;
originally announced July 2023.
-
Hydrogen crystals reduce dissipation in superconducting resonators
Authors:
Francesco Valenti,
Andrew N. Kanagin,
Andreas Angerer,
Luiza Buimaga-Iarinca,
Cristian Morari,
Jörg Schmiedmayer,
Ioan M. Pop
Abstract:
We show that the internal quality factors of high impedance superconducting resonators made of granular aluminum can be improved by coating them with micrometric films of solid para-hydrogen molecular crystals. We attribute the average measured $\approx 8\%$ reduction in dissipation to absorption of stray terahertz radiation at the crystal-resonator interface and the subsequent dissipation of its…
▽ More
We show that the internal quality factors of high impedance superconducting resonators made of granular aluminum can be improved by coating them with micrometric films of solid para-hydrogen molecular crystals. We attribute the average measured $\approx 8\%$ reduction in dissipation to absorption of stray terahertz radiation at the crystal-resonator interface and the subsequent dissipation of its energy in the form of phonons below the pair-breaking gap. Our results prove that, contrary to expectations, replacing the vacuum dielectric atop a superconducting resonator can be beneficial, thanks to the added protection against Cooper pair-braking terahertz radiation. Moreover, at the level of internal quality factors in the $10^5$ range, the hydrogen crystal does not introduce additional losses, which is promising for embedding impurities to couple to superconducting thin-film devices in hybrid quantum architectures.
△ Less
Submitted 5 April, 2024; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Observation of Josephson Harmonics in Tunnel Junctions
Authors:
Dennis Willsch,
Dennis Rieger,
Patrick Winkel,
Madita Willsch,
Christian Dickel,
Jonas Krause,
Yoichi Ando,
Raphaël Lescanne,
Zaki Leghtas,
Nicholas T. Bronn,
Pratiti Deb,
Olivia Lanes,
Zlatko K. Minev,
Benedikt Dennig,
Simon Geisert,
Simon Günzler,
Sören Ihssen,
Patrick Paluch,
Thomas Reisinger,
Roudy Hanna,
** Hee Bae,
Peter Schüffelgen,
Detlev Grützmacher,
Luiza Buimaga-Iarinca,
Cristian Morari
, et al. (5 additional authors not shown)
Abstract:
Superconducting quantum processors have a long road ahead to reach fault-tolerant quantum computing. One of the most daunting challenges is taming the numerous microscopic degrees of freedom ubiquitous in solid-state devices. State-of-the-art technologies, including the world's largest quantum processors, employ aluminum oxide (AlO$_x$) tunnel Josephson junctions (JJs) as sources of nonlinearity,…
▽ More
Superconducting quantum processors have a long road ahead to reach fault-tolerant quantum computing. One of the most daunting challenges is taming the numerous microscopic degrees of freedom ubiquitous in solid-state devices. State-of-the-art technologies, including the world's largest quantum processors, employ aluminum oxide (AlO$_x$) tunnel Josephson junctions (JJs) as sources of nonlinearity, assuming an idealized pure $\sin\varphi$ current-phase relation (C$\varphi$R). However, this celebrated $\sin\varphi$ C$\varphi$R is only expected to occur in the limit of vanishingly low-transparency channels in the AlO$_x$ barrier. Here we show that the standard C$\varphi$R fails to accurately describe the energy spectra of transmon artificial atoms across various samples and laboratories. Instead, a mesoscopic model of tunneling through an inhomogeneous AlO$_x$ barrier predicts %-level contributions from higher Josephson harmonics. By including these in the transmon Hamiltonian, we obtain orders of magnitude better agreement between the computed and measured energy spectra. The reality of Josephson harmonics transforms qubit design and prompts a reevaluation of models for quantum gates and readout, parametric amplification and mixing, Floquet qubits, protected Josephson qubits, etc. As an example, we show that engineered Josephson harmonics can reduce the charge dispersion and the associated errors in transmon qubits by an order of magnitude, while preserving anharmonicity.
△ Less
Submitted 22 August, 2023; v1 submitted 17 February, 2023;
originally announced February 2023.
-
Fano Interference in Microwave Resonator Measurements
Authors:
D. Rieger,
S. Günzler,
M. Spiecker,
A. Nambisan,
W. Wernsdorfer,
I. M. Pop
Abstract:
Resonator measurements are a simple but powerful tool to characterize a material's microwave response. The losses of a resonant mode are quantified by its internal quality factor $Q_\mathrm{i}$, which can be extracted from the scattering coefficient in a microwave reflection or transmission measurement. Here we show that a systematic error on $Q_\mathrm{i}$ arises from Fano interference of the sig…
▽ More
Resonator measurements are a simple but powerful tool to characterize a material's microwave response. The losses of a resonant mode are quantified by its internal quality factor $Q_\mathrm{i}$, which can be extracted from the scattering coefficient in a microwave reflection or transmission measurement. Here we show that a systematic error on $Q_\mathrm{i}$ arises from Fano interference of the signal with a background path. Limited knowledge of the interfering paths in a given setup translates into a range of uncertainty for $Q_\mathrm{i}$, which increases with the coupling coefficient. We experimentally illustrate the relevance of Fano interference in typical microwave resonator measurements and the associated pitfalls encountered in extracting $Q_\mathrm{i}$. On the other hand, we also show how to characterize and utilize the Fano interference to eliminate the systematic error.
△ Less
Submitted 27 March, 2023; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Two-level system hyperpolarization using a quantum Szilard engine
Authors:
Martin Spiecker,
Patrick Paluch,
Nicolas Gosling,
Niv Drucker,
Shlomi Matityahu,
Daria Gusenkova,
Simon Günzler,
Dennis Rieger,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Richard Gebauer,
Oliver Sander,
Gianluigi Catelani,
Alexander Shnirman,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Yonatan Cohen,
Ioan M. Pop
Abstract:
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Imp…
▽ More
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Implementing a quantum Szilard engine with an active feedback control loop allows us to decide whether the qubit heats or cools its TLS environment. The TLSs can be cooled down resulting in a four times lower qubit population, or they can be heated to manifest themselves as a negative temperature environment corresponding to a qubit population of $\sim 80\,\%$. We show that the TLSs and the qubit are each other's dominant loss mechanism and that the qubit relaxation is independent of the TLS populations. Understanding and mitigating TLS environments is therefore not only crucial to improve qubit lifetimes but also to avoid non-Markovian qubit dynamics.
△ Less
Submitted 22 May, 2024; v1 submitted 1 April, 2022;
originally announced April 2022.
-
Gralmonium: Granular Aluminum Nano-Junction Fluxonium Qubit
Authors:
D. Rieger,
S. Günzler,
M. Spiecker,
P. Paluch,
P. Winkel,
L. Hahn,
J. K. Hohmann,
A. Bacher,
W. Wernsdorfer,
I. M. Pop
Abstract:
Mesoscopic Josephson junctions (JJs), consisting of overlap** superconducting electrodes separated by a nanometer thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits and are at the heart of state-of-the-art qubits, such as the transmon and fluxonium. Here, we show that in a fluxonium qubit the role of the JJ can also be played by a lithographically de…
▽ More
Mesoscopic Josephson junctions (JJs), consisting of overlap** superconducting electrodes separated by a nanometer thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits and are at the heart of state-of-the-art qubits, such as the transmon and fluxonium. Here, we show that in a fluxonium qubit the role of the JJ can also be played by a lithographically defined, self-structured granular aluminum (grAl) nano-junction: a superconductor-insulator-superconductor (SIS) JJ obtained in a single layer, zero-angle evaporation. The measured spectrum of the resulting qubit, which we nickname gralmonium, is indistinguishable from the one of a standard fluxonium qubit. Remarkably, the lack of a mesoscopic parallel plate capacitor gives rise to an intrinsically large grAl nano-junction charging energy in the range of tens of $\mathrm{GHz}$, comparable to its Josephson energy $E_\mathrm{J}$. We measure average energy relaxation times of $T_1=10\,\mathrm{μs}$ and Hahn echo coherence times of $T_2^\text{echo}=9\,\mathrm{μs}$. The exponential sensitivity of the gralmonium to the $E_\text{J}$ of the grAl nano-junction provides a highly susceptible detector. Indeed, we observe spontaneous jumps of the value of $E_\text{J}$ on timescales from milliseconds to days, which offer a powerful diagnostics tool for microscopic defects in superconducting materials.
△ Less
Submitted 5 September, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Operating in a deep underground facility improves the locking of gradiometric fluxonium qubits at the sweet spots
Authors:
Daria Gusenkova,
Francesco Valenti,
Martin Spiecker,
Simon Günzler,
Patrick Paluch,
Dennis Rieger,
Larisa-Milena Pioraş-Ţimbolmaş,
Liviu P. Zârbo,
Nicola Casali,
Ivan Colantoni,
Angelo Cruciani,
Stefano Pirro,
Laura Cardani,
Alexandru Petrescu,
Wolfgang Wernsdorfer,
Patrick Winkel,
Ioan M. Pop
Abstract:
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the…
▽ More
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the device in an external magnetic field while crossing the metal-to-superconductor transition, the gradiometric fluxonium can be locked either at $0$ or $Φ_0/2$ effective flux bias, corresponding to an even or odd number of trapped fluxons, respectively. At mK temperatures, the fluxon parity prepared during initialization survives to magnetic field bias exceeding $100 \,Φ_0$. However, even for states biased in the vicinity of $1 \,Φ_0$, we observe unexpectedly short fluxon lifetimes of a few hours, which cannot be explained by thermal or quantum phase slips. When operating in a deep-underground cryostat of the Gran Sasso laboratory, the fluxon lifetimes increase to days, indicating that ionizing events activate phase slips in the grAl superinductor.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Materials and devices for fundamental quantum science and quantum technologies
Authors:
Marco Polini,
Francesco Giazotto,
Kin Chung Fong,
Ioan M. Pop,
Carsten Schuck,
Tommaso Boccali,
Giovanni Signorelli,
Massimo D'Elia,
Robert H. Hadfield,
Vittorio Giovannetti,
Davide Rossini,
Alessandro Tredicucci,
Dmitri K. Efetov,
Frank H. L. Koppens,
Pablo Jarillo-Herrero,
Anna Grassellino,
Dario Pisignano
Abstract:
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In thi…
▽ More
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In this Perspective, we focus on advanced superconducting materials, van der Waals materials, and moiré quantum matter, summarizing recent exciting developments and highlighting a wealth of potential applications, ranging from high-energy experimental and theoretical physics to quantum materials science and energy storage.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Superconducting microwave magnetometer for absolute flux detection
Authors:
Simon Günzler,
Patrick Winkel,
Dennis Rieger,
Kiril Borisov,
Martin Spiecker,
Alexey V. Ustinov,
Ioan M. Pop,
Wolfgang Wernsdorfer
Abstract:
Superconducting quantum interference devices (SQUIDs) are among the most sensitive detectors for out-of-plane magnetic field components. However, due to their periodic response with short modulation period $M = 1 Φ_0$, determined by the magnetic flux quantum $Φ_0 \approx 2.068\times 10^{-15}\,\mathrm{Wb}$, it is difficult to infer the value of the magnetic flux unambiguously, especially in case th…
▽ More
Superconducting quantum interference devices (SQUIDs) are among the most sensitive detectors for out-of-plane magnetic field components. However, due to their periodic response with short modulation period $M = 1 Φ_0$, determined by the magnetic flux quantum $Φ_0 \approx 2.068\times 10^{-15}\,\mathrm{Wb}$, it is difficult to infer the value of the magnetic flux unambiguously, especially in case the magnetic flux enclosed in the SQUID loop changes by many flux quanta. Here, we demonstrate that by introducing a second degree of freedom in the form of a second SQUID, we substantially enhance the modulation period $M$ of our device without sacrificing sensitivity. As a proof of concept, we implement our idea by embedding two asymmetric direct current SQUIDs into a common tank circuit. By measuring the reflection coefficient of the device, we extract the two lowest energy eigenfrequencies as a function of the external magnetic flux created by a superconducting field coil, from which we experimentally deduce a modulation period $M \geq 15 Φ_0$, as well as the magnetic offset-field $B_0 = 22\,\mathrm{nT}$ present in our experiment.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Minimizing the discrimination time for quantum states of an artificial atom
Authors:
Ivan Takmakov,
Patrick Winkel,
Farshad Foroughi,
Luca Planat,
Daria Gusenkova,
Martin Spiecker,
Dennis Rieger,
Lukas Grünhaupt,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop,
Nicolas Roch
Abstract:
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two or…
▽ More
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two orders of magnitude in readout power, made possible by the unique combination of a dimer Josephson junction array amplifier with a large dynamic range, and the fact that the readout of our granular aluminum fluxonium artificial atom remained quantum-non-demolition (QND) at relatively large photon numbers in the readout resonator, up to $\overline{n} = 110$. Using Bayesian inference, this allows us to detect quantum jumps faster than the readout resonator response time $2/κ$, where $κ$ is the bandwidth of the readout resonator.
△ Less
Submitted 18 November, 2020; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Subgap kinetic inductance detector sensitive to 85-GHz radiation
Authors:
F. Levy-Bertrand,
A. Benoît,
O. Bourrion,
M. Calvo,
A. Catalano,
J. Goupy,
F. Valenti,
N. Maleeva,
L. Grünhaupt,
I. M. Pop,
A. Monfardini
Abstract:
We have fabricated an array of subgap kinetic inductance detectors (SKIDs) made of granular aluminum ($T_c\sim$2~K) sensitive in the 80-90 GHz frequency band and operating at 300~mK. We measure a noise equivalent power of $1.3\times10^{-16}$~W/Hz$^{0.5}$ on average and $2.6\times10^{-17}$~W/Hz$^{0.5}$ at best, for an illuminating power of 50~fW per pixel. Even though the circuit design of SKIDs is…
▽ More
We have fabricated an array of subgap kinetic inductance detectors (SKIDs) made of granular aluminum ($T_c\sim$2~K) sensitive in the 80-90 GHz frequency band and operating at 300~mK. We measure a noise equivalent power of $1.3\times10^{-16}$~W/Hz$^{0.5}$ on average and $2.6\times10^{-17}$~W/Hz$^{0.5}$ at best, for an illuminating power of 50~fW per pixel. Even though the circuit design of SKIDs is identical to that of the kinetic inductance detectors (KIDs), the SKIDs operating principle is based on their sensitivity to subgap excitations. This detection scheme is advantageous because it avoids having to lower the operating temperature proportionally to the lowest detectable frequency. The SKIDs presented here are intrinsically selecting the 80-90 GHz frequency band, well below the superconducting spectral gap of the film, at approximately 180 GHz.
△ Less
Submitted 6 April, 2021; v1 submitted 8 October, 2020;
originally announced October 2020.
-
Energy-participation quantization of Josephson circuits
Authors:
Zlatko K. Minev,
Zaki Leghtas,
Shantanu O. Mundhada,
Lysander Christakis,
Ioan M. Pop,
Michel H. Devoret
Abstract:
Superconducting microwave circuits incorporating nonlinear devices, such as Josephson junctions, are one of the leading platforms for emerging quantum technologies. Increasing circuit complexity further requires efficient methods for the calculation and optimization of the spectrum, nonlinear interactions, and dissipation in multi-mode distributed quantum circuits. Here, we present a method based…
▽ More
Superconducting microwave circuits incorporating nonlinear devices, such as Josephson junctions, are one of the leading platforms for emerging quantum technologies. Increasing circuit complexity further requires efficient methods for the calculation and optimization of the spectrum, nonlinear interactions, and dissipation in multi-mode distributed quantum circuits. Here, we present a method based on the energy-participation ratio (EPR) of a dissipative or nonlinear element in an electromagnetic mode. The EPR, a number between zero and one, quantifies how much of the energy of a mode is stored in each element. It obeys universal constraints--valid regardless of the circuit topology and nature of the nonlinear elements. The EPR of the elements are calculated from a unique, efficient electromagnetic eigenmode simulation of the linearized circuit, including lossy elements. Their set is the key input to the determination of the quantum Hamiltonian of the system. The method provides an intuitive and simple-to-use tool to quantize multi-junction circuits. It is especially well-suited for finding the Hamiltonian and dissipative parameters of weakly anharmonic systems, such as transmon qubits coupled to resonators, or Josephson transmission lines. We experimentally tested this method on a variety of Josephson circuits, and demonstrated agreement within several percents for nonlinear couplings and modal Hamiltonian parameters, spanning five-orders of magnitude in energy, across a dozen samples.
△ Less
Submitted 16 August, 2021; v1 submitted 1 October, 2020;
originally announced October 2020.
-
Quantum non-demolition dispersive readout of a superconducting artificial atom using large photon numbers
Authors:
Daria Gusenkova,
Martin Spiecker,
Richard Gebauer,
Madita Willsch,
Francesco Valenti,
Nick Karcher,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Dennis Rieger,
Alexey V. Ustinov,
Nicolas Roch,
Wolfgang Wernsdorfer,
Kristel Michielsen,
Oliver Sander,
Ioan M. Pop
Abstract:
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally obs…
▽ More
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally observed to also increase these transition rates. Here we present a fluxonium artificial atom in which we measure an overall flat dependence of the transition rates between its first two states as a function of $\bar{n}$, up to $\bar{n}\approx200$. Despite the fact that we observe the expected decrease of the dispersive shift with increasing readout power, the signal-to-noise ratio continuously improves with increasing $\bar{n}$. Even without the use of a parametric amplifier, at $\bar{n}=74$, we measure fidelities of 99% and 93% for feedback-assisted ground and excited state preparation, respectively.
△ Less
Submitted 20 November, 2020; v1 submitted 30 September, 2020;
originally announced September 2020.
-
Superconducting granular aluminum resonators resilient to magnetic fields up to 1 Tesla
Authors:
K. Borisov,
D. Rieger,
P. Winkel,
F. Henriques,
F. Valenti,
A. Ionita,
M. Wessbecher,
M. Spiecker,
D. Gusenkova,
I. M. Pop,
W. Wernsdorfer
Abstract:
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl mi…
▽ More
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl microwave resonators exceeds $10^5$ in magnetic fields up to 1T, aligned in-plane to the grAl films. Small perpendicular magnetic fields, in the range of 0.5mT, enhance $Q_{\mathrm{i}}$ by approximately 15%, possibly due to the introduction of quasiparticle traps in the form of fluxons. Further increasing the perpendicular field deteriorates the resonators' quality factor. These results open the door for the use of high kinetic inductance grAl structures in circuit quantum electrodynamics and hybrid architectures with magnetic field requirements.
△ Less
Submitted 11 June, 2020; v1 submitted 9 June, 2020;
originally announced June 2020.
-
Reducing the impact of radioactivity on quantum circuits in a deep-underground facility
Authors:
Laura Cardani,
Francesco Valenti,
Nicola Casali,
Gianluigi Catelani,
Thibault Charpentier,
Massimiliano Clemenza,
Ivan Colantoni,
Angelo Cruciani,
Luca Gironi,
Lukas Grünhaupt,
Daria Gusenkova,
Fabio Henriques,
Marc Lagoin,
Maria Martinez,
Giorgio Pettinari,
Claudia Rusconi,
Oliver Sander,
Alexey V. Ustinov,
Marc Weber,
Wolfgang Wernsdorfer,
Marco Vignati,
Stefano Pirro,
Ioan M. Pop
Abstract:
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of…
▽ More
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of broken Cooper pairs, so-called quasiparticles. Here, we show that environmental radioactivity is a significant source of nonequilibrium quasiparticles. Moreover, ionizing radiation introduces time-correlated quasiparticle bursts in resonators on the same chip, further complicating quantum error correction. Operating in a deep-underground lead-shielded cryostat decreases the quasiparticle burst rate by a factor fifty and reduces dissipation up to a factor four, showcasing the importance of radiation abatement in future solid-state quantum hardware.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform
Authors:
Richard Gebauer,
Nick Karcher,
Daria Gusenkova,
Martin Spiecker,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Luca Planat,
Nicolas Roch,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Marc Weber,
Martin Weides,
Ioan M. Pop,
Oliver Sander
Abstract:
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the…
▽ More
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the qubit into the ground state in a time much shorter than its energy relaxation time $T_1$. We show experimental results demonstrating reset of a fluxonium qubit with $99.4\,\%$ fidelity, using a readout-and-drive pulse sequence approximately $1.5 \, \mathrm{μs}$ long. Compared to passive ground state initialization through thermalization, with the time constant given by $T_1 = ~ 80 \, \mathrm{μs}$, the use of the FPGA-based platform allows us to improve both the fidelity and the time of the qubit initialization by an order of magnitude.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Implementation of a transmon qubit using superconducting granular aluminum
Authors:
Patrick Winkel,
Kiril Borisov,
Lukas Grünhaupt,
Dennis Rieger,
Martin Spiecker,
Francesco Valenti,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for st…
▽ More
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for strongly driven quantum circuits, topological superconductivity, and hybrid systems. Having said that, can the grAl non-linearity be sufficient to build a qubit? Here we show that a small grAl volume ($10 \times 200 \times 500 \,\mathrm{nm^3}$) shunted by a thin film aluminum capacitor results in a microwave oscillator with anharmonicity $α$ two orders of magnitude larger than its spectral linewidth $Γ_{01}$, effectively forming a transmon qubit. With increasing drive power, we observe several multi-photon transitions starting from the ground state, from which we extract $α= 2 π\times 4.48\,\mathrm{MHz}$. Resonance fluorescence measurements of the $|0> \rightarrow |1>$ transition yield an intrinsic qubit linewidth $γ= 2 π\times 10\,\mathrm{kHz}$, corresponding to a lifetime of $16\,\mathrm{μs}$. This linewidth remains below $2 π\times 150\,\mathrm{kHz}$ for in-plane magnetic fields up to $\sim70\,\mathrm{mT}$.
△ Less
Submitted 27 October, 2023; v1 submitted 6 November, 2019;
originally announced November 2019.
-
Microscopic charging and in-gap states in superconducting granular aluminum
Authors:
Fang Yang,
Tim Storbeck,
Thomas Gozlinski,
Lukas Gruenhaupt,
Ioan M. Pop,
Wulf Wulfhekel
Abstract:
Following the emergence of superconducting granular aluminum (grAl) as a material for high-impedance quantum circuits, future development hinges on a microscopic understanding of its phase diagram, and whether the superconductor-to-insulator transition (SIT) is driven by disorder or charging effects. Beyond fundamental relevance, these mechanisms govern noise and dissipation in microwave circuits.…
▽ More
Following the emergence of superconducting granular aluminum (grAl) as a material for high-impedance quantum circuits, future development hinges on a microscopic understanding of its phase diagram, and whether the superconductor-to-insulator transition (SIT) is driven by disorder or charging effects. Beyond fundamental relevance, these mechanisms govern noise and dissipation in microwave circuits. Although the enhancement of the critical temperature, and the SIT in granular superconductors have been studied for more than fifty years, experimental studies have so far provided incomplete information on the microscopic phenomena. Here we present scanning tunneling microscope measurements of the local electronic structure of superconducting grAl. We confirm an increased superconducting gap in individual grains both near and above the Mott resistivity $ρ_\mathrm{M} \approx 400\ μΩcm$. Above $ρ_\mathrm{M}$ we find Coulomb charging effects, a first indication for decoupling, and in-gap states on individual grains, which could contribute to flux noise and dielectric loss in quantum devices. We also observe multiple low-energy states outside the gap, which may indicate bosonic excitations of the superconducting order parameter.
△ Less
Submitted 8 November, 2019; v1 submitted 6 November, 2019;
originally announced November 2019.
-
Non-degenerate parametric amplifiers based on dispersion engineered Josephson junction arrays
Authors:
Patrick Winkel,
Ivan Takmakov,
Dennis Rieger,
Luca Planat,
Wiebke Hasch-Guichard,
Lukas Grünhaupt,
Nataliya Maleeva,
Farshad Foroughi,
Fabio Henriques,
Kiril Borisov,
Julian Ferrero,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Nicolas Roch,
Ioan M. Pop
Abstract:
Determining the state of a qubit on a timescale much shorter than its relaxation time is an essential requirement for quantum information processing. With the aid of a new type of non-degenerate parametric amplifier, we demonstrate the continuous detection of quantum jumps of a transmon qubit with 90% fidelity in state discrimination. Entirely fabricated with standard two-step optical lithography…
▽ More
Determining the state of a qubit on a timescale much shorter than its relaxation time is an essential requirement for quantum information processing. With the aid of a new type of non-degenerate parametric amplifier, we demonstrate the continuous detection of quantum jumps of a transmon qubit with 90% fidelity in state discrimination. Entirely fabricated with standard two-step optical lithography techniques, this type of parametric amplifier consists of a dispersion engineered Josephson junction (JJ) array. By using long arrays, containing $10^3$ JJs, we can obtain amplification at multiple eigenmodes with frequencies below $10~\mathrm{GHz}$, which is the typical range for qubit readout. Moreover, by introducing a moderate flux tunability of each mode, employing superconducting quantum interference device (SQUID) junctions, a single amplifier device could potentially cover the entire frequency band between 1 and $10~\mathrm{GHz}$.
△ Less
Submitted 27 October, 2023; v1 submitted 17 September, 2019;
originally announced September 2019.
-
Onset of phase diffusion in high kinetic inductance granular aluminum micro-SQUIDs
Authors:
Felix Friedrich,
Patrick Winkel,
Kiril Borisov,
Hannes Seeger,
Christoph Sürgers,
Ioan M. Pop,
Wolfgang Wernsdorfer
Abstract:
Superconducting granular aluminum is attracting increasing interest due to its high kinetic inductance and low dissipation, favoring its use in kinetic inductance particle detectors, superconducting resonators or quantum bits. We perform switching current measurements on DC-SQUIDs, obtained by introducing two identical geometric constrictions in granular aluminum rings of various normal-state resi…
▽ More
Superconducting granular aluminum is attracting increasing interest due to its high kinetic inductance and low dissipation, favoring its use in kinetic inductance particle detectors, superconducting resonators or quantum bits. We perform switching current measurements on DC-SQUIDs, obtained by introducing two identical geometric constrictions in granular aluminum rings of various normal-state resistivities in the range from $ρ_\mathrm{n} = 250\,μΩ\mathrm{cm}$ to $5550\,μΩ\mathrm{cm}$. The relative high kinetic inductance of the SQUID loop, in the range of tens of nH, leads to a suppression of the modulation in the measured switching current versus magnetic flux, accompanied by a distortion towards a triangular shape. We observe a change in the temperature dependence of the switching current histograms with increasing normal-state film resistivity. This behavior suggests the onset of a diffusive motion of the superconducting phase across the constrictions in the two-dimensional washboard potential of the SQUIDs, which could be caused by a change of the local electromagnetic environment of films with increasing normal-state resistivities.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Phonon traps reduce the quasiparticle density in superconducting circuits
Authors:
Fabio Henriques,
Francesco Valenti,
Thibault Charpentier,
Marc Lagoin,
Clement Gouriou,
Maria Martínez,
Laura Cardani,
Marco Vignati,
Lukas Grünhaupt,
Daria Gusenkova,
Julian Ferrero,
Sebastian T. Skacel,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Gianluigi Catelani,
Oliver Sander,
Ioan M. Pop
Abstract:
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. Th…
▽ More
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. The cyclic process of recombination and generation of QPs implies the exchange of phonons between the superconducting thin film and the underlying substrate. Reducing the number of substrate phonons with frequencies exceeding the spectral gap of the superconductor should result in a reduction of QPs. Indeed, we demonstrate that surrounding high impedance resonators made of granular aluminum (grAl) with lower gapped thin film aluminum islands increases the internal quality factors of the resonators in the single photon regime, suppresses the noise, and reduces the rate of observed QP bursts. The aluminum islands are positioned far enough from the resonators to be electromagnetically decoupled, thus not changing the resonator frequency, nor the loading. We therefore attribute the improvements observed in grAl resonators to phonon trap** at frequencies close to the spectral gap of aluminum, well below the grAl gap.
△ Less
Submitted 20 August, 2019; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Quantum versus classical switching dynamics of driven-dissipative Kerr resonators
Authors:
Christian Kraglund Andersen,
Archana Kamal,
Nicholas A. Masluk,
Ioan M. Pop,
Alexandre Blais,
Michel H. Devoret
Abstract:
We report a first-principles study of the driven dissipative dynamics for Kerr oscillators in the mesoscopic regime. This regime is characterized by large Kerr nonlinearity, realized here using the nonlinear kinetic inductance of a large array of Josephson junctions. The experimentally measured nonlinear resonance lineshapes of the junction array modes show significant deviations from steady-state…
▽ More
We report a first-principles study of the driven dissipative dynamics for Kerr oscillators in the mesoscopic regime. This regime is characterized by large Kerr nonlinearity, realized here using the nonlinear kinetic inductance of a large array of Josephson junctions. The experimentally measured nonlinear resonance lineshapes of the junction array modes show significant deviations from steady-state numerical predictions, and necessitate time-dependent numerical simulations indicative of strong measurement-induced dephasing in the system arising from the large cross-Kerr effect between array modes. Analytical and numerical calculations of switching rate corroborate this by showing the emergence of a slow time scale, which is much longer than the linear decay rate and is set by fluctuation-induced switching times in the bistable regime. Furthermore, our analysis shows that the usual quantum-activated escape treatment is inadequate for prediction of the switching rates at large frequency shifts caused by strong nonlinearities, necessitating a quantum treatment that utilizes the full system Liouvillian. Based on our analysis, we identify a universal crossover parameter that delineates the regimes of validity of semiclassical and quantum descriptions, respectively. Our work shows how dynamical switching effects in strongly nonlinear systems provide a platform to study quantum-to-classical transitions.
△ Less
Submitted 10 April, 2020; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Electrodynamics of granular aluminum from superconductor to insulator: observation of collective superconducting modes
Authors:
F. Levy-Bertrand,
T. Klein,
T. Grenet,
O. Dupré,
A. Benoît,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Catalano,
A. Gomez,
J. Goupy,
L. Grünhaupt,
U. v. Luepke,
N. Maleeva,
F. Valenti,
I. M. Pop,
A. Monfardini
Abstract:
We report on a detailed study of the optical response and $T_c-ρ$ phase diagram ($T_c$ being the superconducting critical temperature and $ρ$ the normal state resistivity of the film) of granular aluminum, combining transport measurements and a high resolution optical spectroscopy technique. The $T_c-ρ$ phase diagram is discussed as resulting from an interplay between the phase stiffness, the Coul…
▽ More
We report on a detailed study of the optical response and $T_c-ρ$ phase diagram ($T_c$ being the superconducting critical temperature and $ρ$ the normal state resistivity of the film) of granular aluminum, combining transport measurements and a high resolution optical spectroscopy technique. The $T_c-ρ$ phase diagram is discussed as resulting from an interplay between the phase stiffness, the Coulomb repulsion and the superconducting gap $Δ$. We provide a direct evidence for two different types of well resolved sub-gap absorptions, at $ω_1\simeqΔ$ and at $Δ\lesssimω_2\lesssim2Δ$ (decreasing with increasing resistivity).
△ Less
Submitted 13 March, 2019; v1 submitted 15 February, 2019;
originally announced February 2019.
-
Interplay between kinetic inductance, non-linearity and quasiparticle dynamics in granular aluminum MKIDs
Authors:
Francesco Valenti,
Fábio Henriques,
Gianluigi Catelani,
Nataliya Maleeva,
Lukas Grünhaupt,
Uwe von Lüpke,
Sebastian T. Skacel,
Patrick Winkel,
Alexander Bilmes,
Alexey V. Ustinov,
Johannes Goupy,
Martino Calvo,
Alain Benoît,
Florence Lévy-Bertrand,
Alessandro Monfardini,
Ioan M. Pop
Abstract:
Microwave kinetic inductance detectors (MKIDs) are thin film, cryogenic, superconducting resonators. Incident Cooper pair-breaking radiation increases their kinetic inductance, thereby measurably lowering their resonant frequency. For a given resonant frequency, the highest MKID responsivity is obtained by maximizing the kinetic inductance fraction $α$. However, in circuits with $α$ close to unity…
▽ More
Microwave kinetic inductance detectors (MKIDs) are thin film, cryogenic, superconducting resonators. Incident Cooper pair-breaking radiation increases their kinetic inductance, thereby measurably lowering their resonant frequency. For a given resonant frequency, the highest MKID responsivity is obtained by maximizing the kinetic inductance fraction $α$. However, in circuits with $α$ close to unity, the low supercurrent density reduces the maximum number of readout photons before bifurcation due to self-Kerr non-linearity, therefore setting a bound for the maximum $α$ before the noise equivalent power (NEP) starts to increase. By fabricating granular aluminum MKIDs with different resistivities, we effectively sweep their kinetic inductance from tens to several hundreds of pH per square. We find a NEP minimum in the range of $25\; \text{aW}/\sqrt{\text{Hz}}$ at $α\approx 0.9$, which results from a tradeoff between the onset of non-linearity and a non-monotonic dependence of the noise spectral density vs. resistivity.
△ Less
Submitted 10 November, 2018; v1 submitted 29 October, 2018;
originally announced October 2018.
-
Granular aluminum: A superconducting material for high impedance quantum circuits
Authors:
Lukas Grünhaupt,
Martin Spiecker,
Daria Gusenkova,
Nataliya Maleeva,
Sebastian T. Skacel,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Hannes Rotzinger,
Alexey V. Ustinov,
Ioan M. Pop
Abstract:
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k…
▽ More
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k$Ω$. However, previous implementations of superinductors, consisting of mesoscopic Josephson junction arrays, can introduce unintended nonlinearity or parasitic resonant modes in the qubit vicinity, degrading its coherence. Here we present a fluxonium qubit design using a granular aluminum (grAl) superinductor strip. Granular aluminum is a particularly attractive material, as it self-assembles into an effective junction array with a remarkably high kinetic inductance, and its fabrication can be in-situ integrated with standard aluminum circuit processing. The measured qubit coherence time $T_2^R$ up to 30 $μ$s illustrates the potential of grAl for applications ranging from protected qubit designs to quantum limited amplifiers and detectors.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Circuit Quantum Electrodynamics of Granular Aluminum Resonators
Authors:
N. Maleeva,
L. Grünhaupt,
T. Klein,
F. Levy-Bertrand,
O. Dupré,
M. Calvo,
F. Valenti,
P. Winkel,
F. Friedrich,
W. Wernsdorfer,
A. V. Ustinov,
H. Rotzinger,
A. Monfardini,
M. V. Fistul,
I. M. Pop
Abstract:
The introduction of crystalline defects or dopants can give rise to so-called "dirty superconductors", characterized by reduced coherence length and quasiparticle mean free path. In particular, granular superconductors such as Granular Aluminum (GrAl), consisting of remarkably uniform grains connected by Josephson contacts have attracted interest since the sixties thanks to their rich phase diagra…
▽ More
The introduction of crystalline defects or dopants can give rise to so-called "dirty superconductors", characterized by reduced coherence length and quasiparticle mean free path. In particular, granular superconductors such as Granular Aluminum (GrAl), consisting of remarkably uniform grains connected by Josephson contacts have attracted interest since the sixties thanks to their rich phase diagram and practical advantages, like increased critical temperature, critical field, and kinetic inductance. Here we report the measurement and modeling of circuit quantum electrodynamics properties of GrAl microwave resonators in a wide frequency range, up to the spectral superconducting gap. Interestingly, we observe self-Kerr coefficients ranging from $10^{-2}$ Hz to $10^5$ Hz, within an order of magnitude from analytic calculations based on GrAl microstructure. This amenable nonlinearity, combined with the relatively high quality factors in the $10^5$ range, open new avenues for applications in quantum information processing and kinetic inductance detectors.
△ Less
Submitted 7 February, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Quasiparticle dynamics in granular aluminum close to the superconductor to insulator transition
Authors:
Lukas Grünhaupt,
Nataliya Maleeva,
Sebastian T. Skacel,
Martino Calvo,
Florence Levy-Bertrand,
Alexey V. Ustinov,
Hannes Rotzinger,
Alessandro Monfardini,
Gianluigi Catelani,
Ioan M. Pop
Abstract:
Superconducting high kinetic inductance elements constitute a valuable resource for quantum circuit design and millimeter-wave detection. Granular aluminum (GrAl) in the superconducting regime is a particularly interesting material since it has already shown a kinetic inductance in the range of nH$/\Box$ and its deposition is compatible with conventional Al/AlOx/Al Josephson junction fabrication.…
▽ More
Superconducting high kinetic inductance elements constitute a valuable resource for quantum circuit design and millimeter-wave detection. Granular aluminum (GrAl) in the superconducting regime is a particularly interesting material since it has already shown a kinetic inductance in the range of nH$/\Box$ and its deposition is compatible with conventional Al/AlOx/Al Josephson junction fabrication. We characterize microwave resonators fabricated from GrAl with a room temperature resistivity of $4 \times 10^3\,μΩ\cdot$cm, which is a factor of 3 below the superconductor to insulator transition, showing a kinetic inductance fraction close to unity. The measured internal quality factors are on the order of $Q_{\mathrm{i}} = 10^5$ in the single photon regime, and we demonstrate that non-equilibrium quasiparticles (QP) constitute the dominant loss mechanism. We extract QP relaxation times in the range of 1 s and we observe QP bursts every $\sim 20$ s. The current level of coherence of GrAl resonators makes them attractive for integration in quantum devices, while it also evidences the need to reduce the density of non-equilibrium QPs.
△ Less
Submitted 7 February, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Fluxon-Based Quantum Simulation in Circuit QED
Authors:
Alexandru Petrescu,
Hakan E. Türeci,
Alexey V. Ustinov,
Ioan M. Pop
Abstract:
Long-lived fluxon excitations can be trapped inside a superinductor ring, which is divided into an array of loops by a periodic sequence of Josephson junctions in the quantum regime, thereby allowing fluxons to tunnel between neighboring sites. By tuning the Josephson couplings, and implicitly the fluxon tunneling probability amplitudes, a wide class of 1D tight-binding lattice models may be imple…
▽ More
Long-lived fluxon excitations can be trapped inside a superinductor ring, which is divided into an array of loops by a periodic sequence of Josephson junctions in the quantum regime, thereby allowing fluxons to tunnel between neighboring sites. By tuning the Josephson couplings, and implicitly the fluxon tunneling probability amplitudes, a wide class of 1D tight-binding lattice models may be implemented and populated with a stable number of fluxons. We illustrate the use of this quantum simulation platform by discussing the Su-Schrieffer-Heeger model in the 1-fluxon subspace, which hosts a symmetry protected topological phase with fractionally charged bound states at the edges. This pair of localized edge states could be used to implement a superconducting qubit increasingly decoupled from decoherence mechanisms.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Tunable ohmic environment using Josephson junction chains
Authors:
Gianluca Rastelli,
Ioan M. Pop
Abstract:
We propose a scheme to implement a tunable, wide frequency-band dissipative environment using a double chain of Josephson junctions. The two parallel chains consist of identical SQUIDs, with magnetic-flux tunable inductance, coupled to each other at each node via a capacitance much larger than the junction capacitance. Thanks to this capacitive coupling, the system sustains electromagnetic modes w…
▽ More
We propose a scheme to implement a tunable, wide frequency-band dissipative environment using a double chain of Josephson junctions. The two parallel chains consist of identical SQUIDs, with magnetic-flux tunable inductance, coupled to each other at each node via a capacitance much larger than the junction capacitance. Thanks to this capacitive coupling, the system sustains electromagnetic modes with a wide frequency dispersion. The internal quality factor of the modes is maintained as high as possible, and the dam** is introduced by a uniform coupling of the modes to a transmission line, itself connected to an amplification and readout circuit. For sufficiently long chains, containing several thousands of junctions, the resulting admittance is a smooth function versus frequency in the microwave domain, and its effective dissipation can be continuously monitored by recording the emitted radiation in the transmission line. We show that by varying in-situ the SQUIDs' inductance, the double chain can operate as tunable ohmic resistor in a frequency band spanning up to one GHz, with a resistance that can be swept through values comparable to the resistance quantum R_q = (h/4e^2) ~ 6.5 kΩ. We argue that the circuit complexity is within reach using current Josephson junction technology.
△ Less
Submitted 17 May, 2018; v1 submitted 20 December, 2017;
originally announced December 2017.
-
Driving forbidden transitions in the fluxonium artificial atom
Authors:
U. Vool,
A. Kou,
W. C. Smith,
N. E. Frattini,
K. Serniak,
P. Reinhold,
I. M. Pop,
S. Shankar,
L. Frunzio,
S. M. Girvin,
M. H. Devoret
Abstract:
Atomic systems display a rich variety of quantum dynamics due to the different possible symmetries obeyed by the atoms. These symmetries result in selection rules that have been essential for the quantum control of atomic systems. Superconducting artificial atoms are mainly governed by parity symmetry. Its corresponding selection rule limits the types of quantum systems that can be built using ele…
▽ More
Atomic systems display a rich variety of quantum dynamics due to the different possible symmetries obeyed by the atoms. These symmetries result in selection rules that have been essential for the quantum control of atomic systems. Superconducting artificial atoms are mainly governed by parity symmetry. Its corresponding selection rule limits the types of quantum systems that can be built using electromagnetic circuits at their optimal coherence operation points ("sweet spots"). Here, we use third-order nonlinear coupling between the artificial atom and its readout resonator to drive transitions forbidden by the parity selection rule for linear coupling to microwave radiation. A Lambda-type system emerges from these newly accessible transitions, implemented here in the fluxonium artificial atom coupled to its "antenna" resonator. We demonstrate coherent manipulation of the fluxonium artificial atom at its sweet spot by stimulated Raman transitions. This type of transition enables the creation of new quantum operations, such as the control and readout of physically protected artificial atoms.
△ Less
Submitted 31 May, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
Inductively shunted transmon qubit with tunable transverse and longitudinal coupling
Authors:
Susanne Richer,
Nataliya Maleeva,
Sebastian T. Skacel,
Ioan M. Pop,
David DiVincenzo
Abstract:
We present the design of an inductively shunted transmon qubit with flux-tunable coupling to an embedded harmonic mode. This circuit construction offers the possibility to flux-choose between pure transverse and pure longitudinal coupling, that is coupling to the $σ_x$ or $σ_z$ degree of freedom of the qubit. While transverse coupling is the coupling type that is most commonly used for superconduc…
▽ More
We present the design of an inductively shunted transmon qubit with flux-tunable coupling to an embedded harmonic mode. This circuit construction offers the possibility to flux-choose between pure transverse and pure longitudinal coupling, that is coupling to the $σ_x$ or $σ_z$ degree of freedom of the qubit. While transverse coupling is the coupling type that is most commonly used for superconducting qubits, the inherently different longitudinal coupling has some remarkable advantages both for readout and for the scalability of a circuit. Being able to choose between both kinds of coupling in the same circuit provides the flexibility to use one for coupling to the next qubit and one for readout, or vice versa. We provide a detailed analysis of the system's behavior using realistic parameters, along with a proposal for the physical implementation of a prototype device.
△ Less
Submitted 20 November, 2017; v1 submitted 16 August, 2017;
originally announced August 2017.
-
An argon ion beam milling process for native $\text{AlO}_\text{x}$ layers enabling coherent superconducting contacts
Authors:
Lukas Grünhaupt,
Uwe von Lüpke,
Daria Gusenkova,
Sebastian T. Skacel,
Nataliya Maleeva,
Steffen Schlör,
Alexander Bilmes,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides,
Ioan M. Pop
Abstract:
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without cont…
▽ More
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without contacts, we place an upper bound on the residual resistance of an ion beam milled contact of 50$\,\mathrm{m}Ω\cdot μ\mathrm{m}^2$ at a frequency of 4.5 GHz. Resonators for which only $6\%$ of the total foot-print was exposed to the ion beam milling, in areas of low electric and high magnetic field, showed quality factors above $10^6$ in the single photon regime, and no degradation compared to single layer samples. We believe these results will enable the development of increasingly complex superconducting circuits for quantum information processing.
△ Less
Submitted 16 June, 2017;
originally announced June 2017.
-
Bistability in a Mesoscopic Josephson Junction Array Resonator
Authors:
P. R. Muppalla,
O. Gargiulo,
S. I. Mirzaei,
B. Prasanna Venkatesh,
M. L. Juan,
L. Grünhaupt,
I. M. Pop,
G. Kirchmair
Abstract:
We present an experimental investigation of stochastic switching of a bistable Josephson junctions array resonator with a resonance frequency in the GHz range. As the device is in the regime where the anharmonicity is on the order of the linewidth, the bistability appears for a pump strength of only a few photons. We measure the dynamics of the bistability by continuously observing the jumps betwe…
▽ More
We present an experimental investigation of stochastic switching of a bistable Josephson junctions array resonator with a resonance frequency in the GHz range. As the device is in the regime where the anharmonicity is on the order of the linewidth, the bistability appears for a pump strength of only a few photons. We measure the dynamics of the bistability by continuously observing the jumps between the two metastable states, which occur with a rate ranging from a few Hz down to a few mHz. The switching rate strongly depends on the pump strength, readout strength and the temperature, following Kramer's law. The interplay between nonlinearity and coupling, in this little explored regime, could provide a new resource for nondemolition measurements, single photon switches or even elements for autonomous quantum error correction.
△ Less
Submitted 26 June, 2017; v1 submitted 13 June, 2017;
originally announced June 2017.
-
Simultaneous monitoring of fluxonium qubits in a waveguide
Authors:
A. Kou,
W. C. Smith,
U. Vool,
I. M. Pop,
K. M. Sliwa,
M. Hatridge,
L. Frunzio,
M. H. Devoret
Abstract:
Most quantum-error correcting codes assume that the decoherence of each physical qubit is independent of the decoherence of any other physical qubit. We can test the validity of this assumption in an experimental setup where a microwave feedline couples to multiple qubits by examining correlations between the qubits. Here, we investigate the correlations between fluxonium qubits located in a singl…
▽ More
Most quantum-error correcting codes assume that the decoherence of each physical qubit is independent of the decoherence of any other physical qubit. We can test the validity of this assumption in an experimental setup where a microwave feedline couples to multiple qubits by examining correlations between the qubits. Here, we investigate the correlations between fluxonium qubits located in a single waveguide. Despite being in a wide-bandwidth electromagnetic environment, the qubits have measured relaxation times in excess of 100 us. We use cascaded Josephson parametric amplifiers to measure the quantum jumps of two fluxonium qubits simultaneously. No correlations are observed between the relaxation times of the two fluxonium qubits, which indicates that the sources of relaxation are local to each qubit. Our architecture can easily be scaled to monitor larger numbers of qubits.
△ Less
Submitted 17 September, 2017; v1 submitted 16 May, 2017;
originally announced May 2017.
-
Quantization of inductively-shunted superconducting circuits
Authors:
W. C. Smith,
A. Kou,
U. Vool,
I. M. Pop,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
We present a method for calculating the energy levels of superconducting circuits that contain highly anharmonic, inductively-shunted modes with arbitrarily strong coupling. Our method starts by calculating the normal modes of the linearized circuit and proceeds with numerical diagonalization in this basis. As an example, we analyze the Hamiltonian of a fluxonium qubit inductively coupled to a rea…
▽ More
We present a method for calculating the energy levels of superconducting circuits that contain highly anharmonic, inductively-shunted modes with arbitrarily strong coupling. Our method starts by calculating the normal modes of the linearized circuit and proceeds with numerical diagonalization in this basis. As an example, we analyze the Hamiltonian of a fluxonium qubit inductively coupled to a readout resonator. While elementary, this simple example is nontrivial because it cannot be efficiently treated by the method known as "black-box quantization," numerical diagonalization in the bare harmonic oscillator basis, or perturbation theory. Calculated spectra are compared to measured spectroscopy data, demonstrating excellent quantitative agreement between theory and experiment.
△ Less
Submitted 20 October, 2016; v1 submitted 4 February, 2016;
originally announced February 2016.
-
Planar multilayer circuit quantum electrodynamics
Authors:
Z. K. Minev,
K. Serniak,
I. M. Pop,
Z. Leghtas,
K. Sliwa,
M. Hatridge,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Experimental quantum information processing with superconducting circuits is rapidly advancing, driven by innovation in two classes of devices, one involving planar micro-fabricated (2D) resonators, and the other involving machined three-dimensional (3D) cavities. We demonstrate that circuit quantum electrodynamics can be implemented in a multilayer superconducting structure that combines 2D and 3…
▽ More
Experimental quantum information processing with superconducting circuits is rapidly advancing, driven by innovation in two classes of devices, one involving planar micro-fabricated (2D) resonators, and the other involving machined three-dimensional (3D) cavities. We demonstrate that circuit quantum electrodynamics can be implemented in a multilayer superconducting structure that combines 2D and 3D advantages. We employ standard micro-fabrication techniques to pattern each layer, and rely on a vacuum gap between the layers to store the electromagnetic energy. Planar qubits are lithographically defined as an aperture in a conducting boundary of the resonators. We demonstrate the aperture concept by implementing an integrated, two cavity-modes, one transmon-qubit system.
△ Less
Submitted 29 May, 2016; v1 submitted 4 September, 2015;
originally announced September 2015.
-
Confining the state of light to a quantum manifold by engineered two-photon loss
Authors:
Zaki Leghtas,
Steven Touzard,
Ioan M. Pop,
Angela Kou,
Brian Vlastakis,
Andrei Petrenko,
Katrina M. Sliwa,
Anirudh Narla,
Shyam Shankar,
Michael J. Hatridge,
Matthew Reagor,
Luigi Frunzio,
Robert J. Schoelkopf,
Mazyar Mirrahimi,
Michel H. Devoret
Abstract:
Physical systems usually exhibit quantum behavior, such as superpositions and entanglement, only when they are sufficiently decoupled from a lossy environment. Paradoxically, a specially engineered interaction with the environment can become a resource for the generation and protection of quantum states. This notion can be generalized to the confinement of a system into a manifold of quantum state…
▽ More
Physical systems usually exhibit quantum behavior, such as superpositions and entanglement, only when they are sufficiently decoupled from a lossy environment. Paradoxically, a specially engineered interaction with the environment can become a resource for the generation and protection of quantum states. This notion can be generalized to the confinement of a system into a manifold of quantum states, consisting of all coherent superpositions of multiple stable steady states. We have experimentally confined the state of a harmonic oscillator to the quantum manifold spanned by two coherent states of opposite phases. In particular, we have observed a Schrodinger cat state spontaneously squeeze out of vacuum, before decaying into a classical mixture. This was accomplished by designing a superconducting microwave resonator whose coupling to a cold bath is dominated by photon pair exchange. This experiment opens new avenues in the fields of nonlinear quantum optics and quantum information, where systems with multi-dimensional steady state manifolds can be used as error corrected logical qubits.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.
-
Bloch band dynamics of a Josephson junction in an inductive environment
Authors:
T. Weißl,
G. Rastelli,
I. Matei,
I. M. Pop,
O. Buisson,
F. W. J. Hekking,
W. Guichard
Abstract:
We have measured the current-voltage characteristics of a Josephson junction with tunable Josephson energy $E_J$ embedded in an inductive environment provided by a chain of SQUIDs. Such an environment induces localization of the charge on the junction, which results in an enhancement of the zero-bias resistance of the circuit. We understand this result quantitatively in terms of the Bloch band dyn…
▽ More
We have measured the current-voltage characteristics of a Josephson junction with tunable Josephson energy $E_J$ embedded in an inductive environment provided by a chain of SQUIDs. Such an environment induces localization of the charge on the junction, which results in an enhancement of the zero-bias resistance of the circuit. We understand this result quantitatively in terms of the Bloch band dynamics of the localized charge. This dynamics is governed by diffusion in the lowest Bloch band of the Josephson junction as well as by Landau-Zener transitions out of the lowest band into the higher bands. In addition, the frequencies corresponding to the self-resonant modes of the SQUID array exceed the Josephson energy $E_J$ of the tunable junction, which results in a renormalization of $E_J$, and, as a consequence, of the effective bandwidth of the lowest Bloch band.
△ Less
Submitted 7 November, 2014; v1 submitted 29 July, 2014;
originally announced July 2014.
-
Measurement and Control of Quasiparticle Dynamics in a Superconducting Qubit
Authors:
Chen Wang,
Yvonne Y. Gao,
Ioan M. Pop,
Uri Vool,
Chris Axline,
Teresa Brecht,
Reinier W. Heeres,
Luigi Frunzio,
Michel H. Devoret,
Gianluigi Catelani,
Leonid I. Glazman,
Robert J. Schoelkopf
Abstract:
Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reduc…
▽ More
Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reducing the lifetimes of detrimental single-electron-like excitations known as quasiparticles. Using a contactless injection technique with unprecedented dynamic range, we quantitatively distinguish between recombination and trap** mechanisms in controlling the dynamics of residual quasiparticles, and show quantized changes in quasiparticle trap** rate due to individual vortices. These results highlight the prominent role of quasiparticle trap** in future development of superconducting qubits, and provide a powerful characterization tool along the way.
△ Less
Submitted 24 October, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations
Authors:
Uri Vool,
Ioan M. Pop,
Katrina Sliwa,
Baleegh Abdo,
Chen Wang,
Teresa Brecht,
Yvonne Y. Gao,
Shyam Shankar,
Michael Hatridge,
Gianluigi Catelani,
Mazyar Mirrahimi,
Luigi Frunzio,
Robert J. Schoelkopf,
Leonid I. Glazman,
Michel H. Devoret
Abstract:
As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxa…
▽ More
As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxation is dominated by quasiparticle loss. Resolution on the scale of a single quasiparticle is obtained by performing quantum non-demolition projective measurements within a time interval much shorter than $T_1$, using a quantum limited amplifier (Josephson Parametric Converter). The quantum jumps statistics switches between the expected Poisson distribution and a non-Poissonian one, indicating large relative fluctuations in the quasiparticle population, on time scales varying from seconds to hours. This dynamics can be modified controllably by injecting quasiparticles or by seeding quasiparticle-trap** vortices by cooling down in magnetic field.
△ Less
Submitted 9 December, 2014; v1 submitted 6 June, 2014;
originally announced June 2014.
-
Understanding the $μ$SR spectra of MnSi without magnetic polarons
Authors:
A. Amato,
P. Dalmas de Réotier,
D. Andreica,
A. Yaouanc,
A. Suter,
G. Lapertot,
I. M. Pop,
E. Morenzoni,
P. Bonfà,
F. Bernardini,
R. De Renzi
Abstract:
Transverse-field muon-spin rotation ($μ$SR) experiments were performed on a single crystal sample of the non-centrosymmetric system MnSi. The observed angular dependence of the muon precession frequencies matches perfectly the one of the Mn-dipolar fields acting on the muons stop** at a 4a position of the crystallographic structure. The data provide a precise determination of the magnetic dipola…
▽ More
Transverse-field muon-spin rotation ($μ$SR) experiments were performed on a single crystal sample of the non-centrosymmetric system MnSi. The observed angular dependence of the muon precession frequencies matches perfectly the one of the Mn-dipolar fields acting on the muons stop** at a 4a position of the crystallographic structure. The data provide a precise determination of the magnetic dipolar tensor. In addition, we have calculated the shape of the field distribution expected below the magnetic transition temperature $T_C$ at the 4a muon-site when no external magnetic field is applied. We show that this field distribution is consistent with the one reported by zero-field $μ$SR studies. Finally, we present ab initio calculations based on the density-functional theory which confirm the position of the muon stop** site inferred from transverse-field $μ$SR. In view of the presented evidence we conclude that the $μ$SR response of MnSi can be perfectly and fully understood without invoking a hypothetical magnetic polaron state.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Planar Superconducting Whispering Gallery Mode Resonators
Authors:
Z. K. Minev,
I. M. Pop,
M. H. Devoret
Abstract:
We introduce a microwave circuit architecture for quantum signal processing combining design principles borrowed from high-Q 3D resonators in the quantum regime and from planar structures fabricated with standard lithography. The resulting '2.5D' whispering-gallery mode resonators store 98% of their energy in vacuum. We have measured internal quality factors above 3 million at the single photon le…
▽ More
We introduce a microwave circuit architecture for quantum signal processing combining design principles borrowed from high-Q 3D resonators in the quantum regime and from planar structures fabricated with standard lithography. The resulting '2.5D' whispering-gallery mode resonators store 98% of their energy in vacuum. We have measured internal quality factors above 3 million at the single photon level and have used the device as a materials characterization platform to place an upper bound on the surface resistance of thin film aluminum of less than 250nOhms.
△ Less
Submitted 7 October, 2013; v1 submitted 7 August, 2013;
originally announced August 2013.
-
Reaching 10 ms single photon lifetimes for superconducting aluminum cavities
Authors:
M. Reagor,
Hanhee Paik,
G. Catelani,
L. Sun,
C. Axline,
E. Holland,
I. M. Pop,
N. A. Masluk,
T. Brecht,
L. Frunzio,
M. H. Devoret,
L. I. Glazman,
R. J. Schoelkopf
Abstract:
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes…
▽ More
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5x10^9 and intrinsic lifetimes of 0.01 seconds for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
△ Less
Submitted 22 May, 2013; v1 submitted 18 February, 2013;
originally announced February 2013.
-
Demonstrating a Driven Reset Protocol of a Superconducting Qubit
Authors:
K. Geerlings,
Z. Leghtas,
I. M. Pop,
S. Shankar,
L. Frunzio,
R. J. Schoelkopf,
M. Mirrahimi,
M. H. Devoret
Abstract:
Qubit reset is crucial at the start of and during quantum information algorithms. We present the experimental demonstration of a practical method to force qubits into their ground state, based on driving certain qubit and cavity transitions. Our protocol, called the double drive reset of population is tested on a superconducting transmon qubit in a three-dimensional cavity. Using a new method for…
▽ More
Qubit reset is crucial at the start of and during quantum information algorithms. We present the experimental demonstration of a practical method to force qubits into their ground state, based on driving certain qubit and cavity transitions. Our protocol, called the double drive reset of population is tested on a superconducting transmon qubit in a three-dimensional cavity. Using a new method for measuring population, we show that we can prepare the ground state with a fidelity of at least 99.5 % in less than 3 microseconds; faster times and higher fidelity are predicted upon parameter optimization.
△ Less
Submitted 25 March, 2013; v1 submitted 2 November, 2012;
originally announced November 2012.
-
Implementation of low-loss superinductances for quantum circuits
Authors:
Nicholas A. Masluk,
Ioan M. Pop,
Archana Kamal,
Zlatko K. Minev,
Michel H. Devoret
Abstract:
The simultaneous suppression of charge fluctuations and offsets is crucial for preserving quantum coherence in devices exploiting large quantum fluctuations of the superconducting phase. This requires an environment with both extremely low DC and high RF impedance. Such an environment is provided by a superinductance, defined as a zero DC resistance inductance whose impedance exceeds the resistanc…
▽ More
The simultaneous suppression of charge fluctuations and offsets is crucial for preserving quantum coherence in devices exploiting large quantum fluctuations of the superconducting phase. This requires an environment with both extremely low DC and high RF impedance. Such an environment is provided by a superinductance, defined as a zero DC resistance inductance whose impedance exceeds the resistance quantum $R_Q = h/(2e)^2 \simeq 6.5\ \mathrm{kΩ}$ at frequencies of interest (1 - 10 GHz). In addition, the superinductance must have as little dissipation as possible, and possess a self-resonant frequency well above frequencies of interest. The kinetic inductance of an array of Josephson junctions is an ideal candidate to implement the superinductance provided its phase slip rate is sufficiently low. We successfully implemented such an array using large Josephson junctions ($E_J >> E_C$), and measured internal losses less than 20 ppm, self-resonant frequencies greater than 10 GHz, and phase slip rates less than 1 mHz.
△ Less
Submitted 13 June, 2012;
originally announced June 2012.
-
Coherent frequency conversion in a superconducting artificial atom with two internal degrees of freedom
Authors:
Florent Lecocq,
Ioan M. Pop,
Iulian Matei,
Etienne Dumur,
A. K. Feofanov,
Cécile Naud,
Wiebke GUICHARD,
Olivier Buisson
Abstract:
By adding a large inductance in a dc-SQUID phase qubit loop, one decouples the junctions' dynamics and creates a superconducting artificial atom with two internal degrees of freedom. In addition to the usual symmetric plasma mode ({\it s}-mode) which gives rise to the phase qubit, an anti-symmetric mode ({\it a}-mode) appears. These two modes can be described by two anharmonic oscillators with eig…
▽ More
By adding a large inductance in a dc-SQUID phase qubit loop, one decouples the junctions' dynamics and creates a superconducting artificial atom with two internal degrees of freedom. In addition to the usual symmetric plasma mode ({\it s}-mode) which gives rise to the phase qubit, an anti-symmetric mode ({\it a}-mode) appears. These two modes can be described by two anharmonic oscillators with eigenstates $\ket{n_{s}}$ and $\ket{n_{a}}$ for the {\it s} and {\it a}-mode, respectively. We show that a strong nonlinear coupling between the modes leads to a large energy splitting between states $\ket{0_{s},1_{a}}$ and $\ket{2_{s},0_{a}}$. Finally, coherent frequency conversion is observed via free oscillations between the states $\ket{0_{s},1_{a}}$ and $\ket{2_{s},0_{a}}$.
△ Less
Submitted 19 January, 2012;
originally announced January 2012.
-
Quantum phase-slips in Josephson junction rings
Authors:
G. Rastelli,
I. M. Pop,
F. W. J. Hekking
Abstract:
We study quantum phase-slip (QPS) processes in a superconducting ring containing N Josephson junctions and threaded by an external static magnetic flux. In a such system, a QPS consists of a quantum tunneling event connecting two distinct classical states of the phases with different persistent currents [K. A. Matveev et al., Phys. Rev. Lett. 89, 096802 (2002)]. When the Josephson coupling energy…
▽ More
We study quantum phase-slip (QPS) processes in a superconducting ring containing N Josephson junctions and threaded by an external static magnetic flux. In a such system, a QPS consists of a quantum tunneling event connecting two distinct classical states of the phases with different persistent currents [K. A. Matveev et al., Phys. Rev. Lett. 89, 096802 (2002)]. When the Josephson coupling energy EJ of the junctions is larger than the charging energy EC = e2/2C where C is the junction capacitance, the quantum amplitude for the QPS process is exponentially small in the ratio EJ/EC. At given magnetic flux each QPS can be described as the tunneling of the phase difference of a single junction of almost 2pi, accompanied by a small harmonic displacement of the phase difference of the other N-1 junctions. As a consequence the total QPS amplitude nu is a global property of the ring. Here we study the dependence of nu on the ring size N taking into account the effect of a finite capacitance C0 to ground which leads to the appearance of low-frequency dispersive modes. Josephson and charging effects compete and lead to a nonmonotonic dependence of the ring critical current on N. For N=infty, the system converges either towards a superconducting or an insulating state, depending on the ratio between the charging energy E0 = e2/2C0 and the Josephson coupling energy EJ.
△ Less
Submitted 16 May, 2013; v1 submitted 2 January, 2012;
originally announced January 2012.