-
Thermally Stable Peltier Controlled Vacuum Chamber for Electrical Transport Measurements
Authors:
S. F. Poole,
O. J. Amin,
A. Solomon,
L. X. Barton,
R. P. Campion K. W. Edmonds,
P. Wadley
Abstract:
The design, manufacture and characterisation of an inexpensive, temperature controlled vacuum chamber with millikelvin stability for electrical transport measurements at and near room temperature is reported. A commercially available Peltier device and high-precision temperature controller are used to actively heat and cool the sample space. The system was designed to minimise thermal fluctuations…
▽ More
The design, manufacture and characterisation of an inexpensive, temperature controlled vacuum chamber with millikelvin stability for electrical transport measurements at and near room temperature is reported. A commercially available Peltier device and high-precision temperature controller are used to actively heat and cool the sample space. The system was designed to minimise thermal fluctuations in spintronic and semiconductor transport measurements but the general principle is relevant to a wide range of electrical measurement applications. The main issues overcome are the mounting of a sample with a path of high thermal conductivity through to the Peltier device and the heat-sinking of said Peltier device inside of a vacuum. A copper slug is used as the mount for a sample and a large copper block is used as a thermal feedthrough before a passive heatsink is used to cool this block. The Peltier device provides 20 W of heating and cooling power achieving a maximum range of 30 K below and 40 K above the ambient temperature. The temperature stability is within 5 mK at all set points with even better performance above ambient temperature. A vacuum pressure of 1e-8 hPa is achievable. As a demonstration, we present experimental results from current-induced electrical switching of a CuMnAs thin film. Transport measurements with and without the Peltier control emphasise the importance of a constant temperature in these applications. The thermal lag between the sample space measurement and the sample itself is observed through magnetoresistance values measured during a temperature sweep.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Quantum Information Science and Technology for Nuclear Physics. Input into U.S. Long-Range Planning, 2023
Authors:
Douglas Beck,
Joseph Carlson,
Zohreh Davoudi,
Joseph Formaggio,
Sofia Quaglioni,
Martin Savage,
Joao Barata,
Tanmoy Bhattacharya,
Michael Bishof,
Ian Cloet,
Andrea Delgado,
Michael DeMarco,
Caleb Fink,
Adrien Florio,
Marianne Francois,
Dorota Grabowska,
Shannon Hoogerheide,
Mengyao Huang,
Kazuki Ikeda,
Marc Illa,
Kyungseon Joo,
Dmitri Kharzeev,
Karol Kowalski,
Wai Kin Lai,
Kyle Leach
, et al. (76 additional authors not shown)
Abstract:
In preparation for the 2023 NSAC Long Range Plan (LRP), members of the Nuclear Science community gathered to discuss the current state of, and plans for further leveraging opportunities in, QIST in NP research at the Quantum Information Science for U.S. Nuclear Physics Long Range Planning workshop, held in Santa Fe, New Mexico on January 31 - February 1, 2023. The workshop included 45 in-person pa…
▽ More
In preparation for the 2023 NSAC Long Range Plan (LRP), members of the Nuclear Science community gathered to discuss the current state of, and plans for further leveraging opportunities in, QIST in NP research at the Quantum Information Science for U.S. Nuclear Physics Long Range Planning workshop, held in Santa Fe, New Mexico on January 31 - February 1, 2023. The workshop included 45 in-person participants and 53 remote attendees. The outcome of the workshop identified strategic plans and requirements for the next 5-10 years to advance quantum sensing and quantum simulations within NP, and to develop a diverse quantum-ready workforce. The plans include resolutions endorsed by the participants to address the compelling scientific opportunities at the intersections of NP and QIST. These endorsements are aligned with similar affirmations by the LRP Computational Nuclear Physics and AI/ML Workshop, the Nuclear Structure, Reactions, and Astrophysics LRP Town Hall, and the Fundamental Symmetries, Neutrons, and Neutrinos LRP Town Hall communities.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Magnetic domain engineering in antiferromagnetic CuMnAs and Mn$_2$Au devices
Authors:
Sonka Reimers,
Olena Gomonay,
Oliver J. Amin,
Filip Krizek,
Luke X. Barton Yaryna Lytvynenko,
Stuart Poole,
Richard P. Campion,
Vit Novák,
Francesco Maccherozzi,
Dina Carbone,
Alexander Björling,
Yuran Niu,
Evangelos Golias,
Dominik Kriegner,
Jairo Sinova,
Mathias Kläui,
Martin Jourdan,
Sarnjeet S. Dhesi,
Kevin W. Edmonds,
Peter Wadley
Abstract:
Antiferromagnetic materials hold potential for use in spintronic devices with fast operation frequencies and field robustness. Despite the rapid progress in proof-of-principle functionality in recent years, there has been a notable lack of understanding of antiferromagnetic domain formation and manipulation, which translates to either incomplete or non-scalable control of the magnetic order. Here,…
▽ More
Antiferromagnetic materials hold potential for use in spintronic devices with fast operation frequencies and field robustness. Despite the rapid progress in proof-of-principle functionality in recent years, there has been a notable lack of understanding of antiferromagnetic domain formation and manipulation, which translates to either incomplete or non-scalable control of the magnetic order. Here, we demonstrate simple and functional ways of influencing the domain structure in CuMnAs and Mn2Au, two key materials of antiferromagnetic spintronics research, using device patterning and strain engineering. Comparing x-ray microscopy data from two different materials, we reveal the key parameters dictating domain formation in antiferromagnetic devices and show how the non-trivial interaction of magnetostriction, substrate clam** and edge anisotropy leads to specific equilibrium domain configurations. More specifically, we observe that patterned edges have a significant impact on the magnetic anisotropy and domain structure over long distances, and we propose a theoretical model that relates short-range edge anisotropy and long-range magnetoelastic interactions. The principles invoked are of general applicability to the domain formation and engineering in antiferromagnetic thin films at large, which will pave the way towards realizing truly functional antiferromagnetic devices.
△ Less
Submitted 17 April, 2023; v1 submitted 19 February, 2023;
originally announced February 2023.
-
Probing the Manipulation of Antiferromagnetic Order in CuMnAs Films Using Neutron Diffraction
Authors:
Stuart F. Poole,
Luke X. Barton,
Mu Wang,
Pascal Manuel,
Dmitri Khalyavin,
Sean Langridge,
Kevin W. Edmonds,
Richard P. Campion,
Vit Novák,
Peter Wadley
Abstract:
We describe measurements of the uniaxial magnetic anisotropy and spin-flop rotation of the Néel vector in antiferromagnetic CuMnAs thin films using neutron diffraction. The suppression of the magnetic (100) peak under magnetic fields is observed for films as thin as 20 nm indicating that they undergo a spin-flop transition. Good agreement is found between neutron diffraction and electron transport…
▽ More
We describe measurements of the uniaxial magnetic anisotropy and spin-flop rotation of the Néel vector in antiferromagnetic CuMnAs thin films using neutron diffraction. The suppression of the magnetic (100) peak under magnetic fields is observed for films as thin as 20 nm indicating that they undergo a spin-flop transition. Good agreement is found between neutron diffraction and electron transport measurements of the spin-flop rotation in the same layer, with a similar shape and hysteresis of the obtained curves, while the neutron measurements provide a quantitative determination of the spin flop extent throughout the antiferromagnet layer.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Bring the BitCODE -- Moving Compute and Data in Distributed Heterogeneous Systems
Authors:
Wenbin Lu,
Luis E. Peña,
Pavel Shamis,
Valentin Churavy,
Barbara Chapman,
Steve Poole
Abstract:
In this paper, we present a framework for moving compute and data between processing elements in a distributed heterogeneous system. The implementation of the framework is based on the LLVM compiler toolchain combined with the UCX communication framework. The framework can generate binary machine code or LLVM bitcode for multiple CPU architectures and move the code to remote machines while dynamic…
▽ More
In this paper, we present a framework for moving compute and data between processing elements in a distributed heterogeneous system. The implementation of the framework is based on the LLVM compiler toolchain combined with the UCX communication framework. The framework can generate binary machine code or LLVM bitcode for multiple CPU architectures and move the code to remote machines while dynamically optimizing and linking the code on the target platform. The remotely injected code can recursively propagate itself to other remote machines or generate new code. The goal of this paper is threefold: (a) to present an architecture and implementation of the framework that provides essential infrastructure to program a new class of disaggregated systems wherein heterogeneous programming elements such as compute nodes and data processing units (DPUs) are distributed across the system, (b) to demonstrate how the framework can be integrated with modern, high-level programming languages such as Julia, and (c) to demonstrate and evaluate a new class of eXtended Remote Direct Memory Access (X-RDMA) communication operations that are enabled by this framework. To evaluate the capabilities of the framework, we used a cluster with Fujitsu CPUs and heterogeneous cluster with Intel CPUs and BlueField-2 DPUs interconnected using high-performance RDMA fabric. We demonstrated an X-RDMA pointer chase application that outperforms an RDMA GET-based implementation by 70% and is as fast as Active Messages, but does not require function predeployment on remote platforms.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Antiferromagnetic half-skyrmions electrically generated and controlled at room temperature
Authors:
O. J. Amin,
S. F. Poole,
S. Reimers,
L. X. Barton,
F. Maccherozzi,
S. S. Dhesi,
V. Novák,
F. Křížek,
J. S. Chauhan,
R. P. Campion,
A. W. Rushforth,
T. Jungwirth,
O. A. Tretiakov,
K. W. Edmonds,
P. Wadley
Abstract:
Topologically protected magnetic textures, such as skyrmions, half-skyrmions (merons) and their antiparticles, constitute tiny whirls in the magnetic order. They are promising candidates for information carriers in next-generation memory devices, as they can be efficiently propelled at very high velocities using current-induced spin torques. Antiferromagnets have been shown to host versions of the…
▽ More
Topologically protected magnetic textures, such as skyrmions, half-skyrmions (merons) and their antiparticles, constitute tiny whirls in the magnetic order. They are promising candidates for information carriers in next-generation memory devices, as they can be efficiently propelled at very high velocities using current-induced spin torques. Antiferromagnets have been shown to host versions of these textures, which have gained significant attention because of their potential for terahertz dynamics, deflection free motion, and improved size scaling due to the absence of stray field. Here we show that topological spin textures, merons and antimerons, can be generated at room temperature and reversibly moved using electrical pulses in thin film CuMnAs, a semimetallic antiferromagnet that is a testbed system for spintronic applications. The electrical generation and manipulation of antiferromagnetic merons is a crucial step towards realizing the full potential of antiferromagnetic thin films as active components in high density, high speed magnetic memory devices.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
UCX Programming Interface for Remote Function Injection and Invocation
Authors:
Luis E. Peña,
Wenbin Lu,
Pavel Shamis,
Steve Poole
Abstract:
Network library APIs have historically been developed with the emphasis on data movement, placement, and communication semantics. Many communication semantics are available across a large variety of network libraries, such as send-receive, data streaming, put/get/atomic, RPC, active messages, collective communication, etc. In this work we introduce new compute and data movement APIs that overcome…
▽ More
Network library APIs have historically been developed with the emphasis on data movement, placement, and communication semantics. Many communication semantics are available across a large variety of network libraries, such as send-receive, data streaming, put/get/atomic, RPC, active messages, collective communication, etc. In this work we introduce new compute and data movement APIs that overcome the constraints of the single-program, multiple-data (SPMD) programming model by allowing users to send binary executable code between processing elements. Our proof-of-concept implementation of the API is based on the UCX communication framework and leverages the RDMA network for fast compute migration. We envision the API being used to dispatch user functions from a host CPU to a SmartNIC (DPU), computational storage drive (CSD), or remote servers. In addition, the API can be used by large-scale irregular applications (such as semantic graph analysis), composed of many coordinating tasks operating on a data set so big that it has to be stored on many physical devices. In such cases, it may be more efficient to dynamically choose where code runs as the applications progresses.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Defect-driven antiferromagnetic domain walls in CuMnAs films
Authors:
Sonka Reimers,
Dominik Kriegner,
Olena Gomonay,
Dina Carbone,
Filip Krizek,
Vit Novak,
Richard P. Campion,
Francesco Maccherozzi,
Alexander Bjorling,
Oliver J. Amin,
Luke X. Barton,
Stuart F. Poole,
Khalid A. Omari,
Jan Michalicka,
Ondrej Man,
Jairo Sinova,
Tomas Jungwirth,
Peter Wadley,
Sarnjeet S. Dhesi,
Kevin W. Edmonds
Abstract:
Efficient manipulation of antiferromagnetic (AF) domains and domain walls has opened up new avenues of research towards ultrafast, high-density spintronic devices. AF domain structures are known to be sensitive to magnetoelastic effects, but the microscopic interplay of crystalline defects, strain and magnetic ordering remains largely unknown. Here, we reveal, using photoemission electron microsco…
▽ More
Efficient manipulation of antiferromagnetic (AF) domains and domain walls has opened up new avenues of research towards ultrafast, high-density spintronic devices. AF domain structures are known to be sensitive to magnetoelastic effects, but the microscopic interplay of crystalline defects, strain and magnetic ordering remains largely unknown. Here, we reveal, using photoemission electron microscopy combined with scanning X-ray diffraction imaging and micromagnetic simulations, that the AF domain structure in CuMnAs thin films is dominated by nanoscale structural twin defects. We demonstrate that microtwin defects, which develop across the entire thickness of the film and terminate on the surface as characteristic lines, determine the location and orientation of 180 degree and 90 degree domain walls. The results emphasize the crucial role of nanoscale crystalline defects in determining the AF domains and domain walls, and provide a route to optimizing device performance.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Two-Chains: High Performance Framework for Function Injection and Execution
Authors:
Megan Grodowitz,
Luis E. Peña,
Curtis Dunham,
Dong Zhong,
Pavel Shamis,
Steve Poole
Abstract:
Some important problems, such as semantic graph analysis, require large-scale irregular applications composed of many coordinating tasks that operate on a shared data set so big it has to be stored on many physical devices. In these cases, it may be more efficient to dynamically choose where code runs as the applications progresses. Many programming environments provide task migration or remote fu…
▽ More
Some important problems, such as semantic graph analysis, require large-scale irregular applications composed of many coordinating tasks that operate on a shared data set so big it has to be stored on many physical devices. In these cases, it may be more efficient to dynamically choose where code runs as the applications progresses. Many programming environments provide task migration or remote function calls, but they have sharp trade-offs between flexible composition, portability, performance, and code complexity.
We developed Two-Chains, a high performance framework inspired by active message communication semantics. We use the GNU Binutils, the ELF binary format, and the RDMA network protocol to provide ultra-low granularity distributed function composition at runtime in user space at HPC performance levels using C libraries. Our framework allows the direct injection of function binaries and data to a remote machine cache using the RDMA network. It interoperates seamlessly with existing C libraries using standard dynamic linking and load symbol resolution. We analyze function delivery and execution on cache stashing-enabled hardware and show that stashing decreases latency, increases message rates, and improves noise tolerance. This demonstrates one way this method is suited to increasingly network-oriented hardware architectures.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Spin flop and crystalline anisotropic magnetoresistance in CuMnAs
Authors:
M. Wang,
C. Andrews,
S. Reimers,
O. J. Amin,
P. Wadley,
R. P. Campion,
S. F. Poole,
J. Felton,
K. W. Edmonds,
B. L. Gallagher,
A. W. Rushforth,
O. Makarovsky,
K. Gas,
M. Sawicki,
D. Kriegner,
J. Zubac,
K. Olejnik,
V. Novak,
T. Jungwirth,
M. Shahrokhvand,
U. Zeitler,
S. S. Dhesi,
F. Maccherozzi
Abstract:
Recent research works have shown that the magnetic order in some antiferromagnetic materials can be manipulated and detected electrically, due to two physical mechanisms: Neel-order spin-orbit torques and anisotropic magnetoresistance. While these observations open up opportunities to use antiferromagnets for magnetic memory devices, different physical characterization methods are required for a b…
▽ More
Recent research works have shown that the magnetic order in some antiferromagnetic materials can be manipulated and detected electrically, due to two physical mechanisms: Neel-order spin-orbit torques and anisotropic magnetoresistance. While these observations open up opportunities to use antiferromagnets for magnetic memory devices, different physical characterization methods are required for a better understanding of those mechanisms. Here we report a magnetic field induced rotation of the antiferromagnetic Neel vector in epitaxial tetragonal CuMnAs thin films. Using soft x-ray magnetic linear dichroism spectroscopy, x-ray photoemission electron microscopy, integral magnetometry and magneto-transport methods, we demonstrate spin-flop switching and continuous spin reorientation in antiferromagnetic films with uniaxial and biaxial magnetic anisotropies, respectively. From field-dependent measurements of the magnetization and magnetoresistance, we obtain key material parameters including the anisotropic magnetoresistance coefficients, magnetocrystalline anisotropy, spin-flop and exchange fields.
△ Less
Submitted 21 June, 2021; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Robust split-step Fourier methods for simulating the propagation of ultra-short pulses in single- and two-mode optical communication fibers
Authors:
Ralf Deiterding,
Stephen W. Poole
Abstract:
Extensions of the split-step Fourier method (SSFM) for Schrödinger-type pulse propagation equations for simulating femto-second pulses in single- and two-mode optical communication fibers are developed and tested for Gaussian pulses. The core idea of the proposed numerical methods is to adopt an operator splitting approach, in which the nonlinear sub-operator, consisting of Kerr nonlinearity, the…
▽ More
Extensions of the split-step Fourier method (SSFM) for Schrödinger-type pulse propagation equations for simulating femto-second pulses in single- and two-mode optical communication fibers are developed and tested for Gaussian pulses. The core idea of the proposed numerical methods is to adopt an operator splitting approach, in which the nonlinear sub-operator, consisting of Kerr nonlinearity, the self-steepening and stimulated Raman scattering terms, is reformulated using Madelung transformation into a quasilinear first-order system of signal intensity and phase. A second-order accurate upwind numerical method is derived rigorously for the resulting system in the single-mode case; a straightforward extension of this method is used to approximate the four-dimensional system resulting from the nonlinearities of the chosen two-mode model. Benchmark SSFM computations of prototypical ultra-fast communication pulses in idealized single- and two-mode fibers with homogeneous and alternating dispersion parameters and also high nonlinearity demonstrate the reliable convergence behavior and robustness of the proposed approach.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Standards for Graph Algorithm Primitives
Authors:
Tim Mattson,
David Bader,
Jon Berry,
Aydin Buluc,
Jack Dongarra,
Christos Faloutsos,
John Feo,
John Gilbert,
Joseph Gonzalez,
Bruce Hendrickson,
Jeremy Kepner,
Charles Leiserson,
Andrew Lumsdaine,
David Padua,
Stephen Poole,
Steve Reinhardt,
Mike Stonebraker,
Steve Wallach,
Andrew Yoo
Abstract:
It is our view that the state of the art in constructing a large collection of graph algorithms in terms of linear algebraic operations is mature enough to support the emergence of a standard set of primitive building blocks. This paper is a position paper defining the problem and announcing our intention to launch an open effort to define this standard.
It is our view that the state of the art in constructing a large collection of graph algorithms in terms of linear algebraic operations is mature enough to support the emergence of a standard set of primitive building blocks. This paper is a position paper defining the problem and announcing our intention to launch an open effort to define this standard.
△ Less
Submitted 2 August, 2014;
originally announced August 2014.
-
A New Benchmark For Evaluation Of Graph-Theoretic Algorithms
Authors:
Andy B. Yoo,
Yang Liu,
Sheila Vaidya,
Stephen Poole
Abstract:
We propose a new graph-theoretic benchmark in this paper. The benchmark is developed to address shortcomings of an existing widely-used graph benchmark. We thoroughly studied a large number of traditional and contemporary graph algorithms reported in the literature to have clear understanding of their algorithmic and run-time characteristics. Based on this study, we designed a suite of kernels, e…
▽ More
We propose a new graph-theoretic benchmark in this paper. The benchmark is developed to address shortcomings of an existing widely-used graph benchmark. We thoroughly studied a large number of traditional and contemporary graph algorithms reported in the literature to have clear understanding of their algorithmic and run-time characteristics. Based on this study, we designed a suite of kernels, each of which represents a specific class of graph algorithms. The kernels are designed to capture the typical run-time behavior of target algorithms accurately, while limiting computational and spatial overhead to ensure its computation finishes in reasonable time. We expect that the developed benchmark will serve as a much needed tool for evaluating different architectures and programming models to run graph algorithms.
△ Less
Submitted 5 May, 2010;
originally announced May 2010.
-
Paper II: Calibration of the Swift ultraviolet/optical telescope
Authors:
A. A. Breeveld,
P. A. Curran,
E. A. Hoversten,
S. Koch,
W. Landsman,
F. E. Marshall,
M. J. Page,
T. S. Poole,
P. Roming,
P. J. Smith,
M. Still,
V. Yershov,
A. J. Blustin,
P. J. Brown,
C. Gronwall,
S. T. Holland,
N. P. M. Kuin,
K. McGowan,
S. Rosen,
P. Boyd,
P. Broos,
M. Carter,
M. M. Chester,
B. Hancock,
H. Huckle
, et al. (10 additional authors not shown)
Abstract:
The Ultraviolet/Optical Telescope (UVOT) is one of three instruments onboard the Swift observatory. The photometric calibration has been published, and this paper follows up with details on other aspects of the calibration including a measurement of the point spread function with an assessment of the orbital variation and the effect on photometry. A correction for large scale variations in sensit…
▽ More
The Ultraviolet/Optical Telescope (UVOT) is one of three instruments onboard the Swift observatory. The photometric calibration has been published, and this paper follows up with details on other aspects of the calibration including a measurement of the point spread function with an assessment of the orbital variation and the effect on photometry. A correction for large scale variations in sensitivity over the field of view is described, as well as a model of the coincidence loss which is used to assess the coincidence correction in extended regions. We have provided a correction for the detector distortion and measured the resulting internal astrometric accuracy of the UVOT, also giving the absolute accuracy with respect to the International Celestial Reference System. We have compiled statistics on the background count rates, and discuss the sources of the background, including instrumental scattered light. In each case we describe any impact on UVOT measurements, whether any correction is applied in the standard pipeline data processing or whether further steps are recommended.
△ Less
Submitted 14 April, 2010;
originally announced April 2010.
-
Ground-based detection of sodium in the transmission spectrum of exoplanet HD209458b
Authors:
I. A. G. Snellen,
S. Albrecht,
E. J. W. de Mooij,
R. S. Le Poole
Abstract:
[Context] The first detection of an atmosphere around an extrasolar planet was presented by Charbonneau and collaborators in 2002. In the optical transmission spectrum of the transiting exoplanet HD209458b, an absorption signal from sodium was measured at a level of 0.023+-0.006%, using the STIS spectrograph on the Hubble Space Telescope. Despite several attempts, so far only upper limits to the…
▽ More
[Context] The first detection of an atmosphere around an extrasolar planet was presented by Charbonneau and collaborators in 2002. In the optical transmission spectrum of the transiting exoplanet HD209458b, an absorption signal from sodium was measured at a level of 0.023+-0.006%, using the STIS spectrograph on the Hubble Space Telescope. Despite several attempts, so far only upper limits to the Na D absorption have been obtained using telescopes from the ground, and the HST result has yet to be confirmed.
[Aims] The aims of this paper are to re-analyse data taken with the High Dispersion Spectrograph on the Subaru telescope, to correct for systematic effects dominating the data quality, and to improve on previous results presented in the literature.
[Methods] The data reduction process was altered in several places, most importantly allowing for small shifts in the wavelength solution. The relative depth of all lines in the spectra, including the two sodium D lines, are found to correlate strongly with the continuum count level in the spectra. These variations are attributed to non-linearity effects in the CCDs. After removal of this empirical relation the uncertainties in the line depths are only a fraction above that expected from photon statistics.
[Results] The sodium absorption due to the planet's atmosphere is detected at >5 sigma, at a level of 0.056+-0.007% (2x3.0 Ang band), 0.070+-0.011% (2x1.5 Ang band), and 0.135+-0.017% (2x0.75 Ang band). There is no evidence that the planetary absorption signal is shifted with respect to the stellar absorption, as recently claimed for HD189733b. The measurements in the two most narrow bands indicate that some signal is being resolved.[abridged]
△ Less
Submitted 7 May, 2008;
originally announced May 2008.
-
Photometric Calibration of the Swift Ultraviolet/Optical Telescope
Authors:
T. S. Poole,
A. A. Breeveld,
M. J. Page,
W. Landsman,
S. T. Holland,
P. Roming,
N. P. M. Kuin,
P. J. Brown,
C. Gronwall,
S. Hunsberger,
S. Koch,
K. O. Mason,
P. Schady,
D. Vanden Berk,
A. J. Blustin,
P. Boyd,
P. Broos,
M. Carter,
M. M. Chester,
A. Cucchiara,
B. Hancock,
H. Huckle,
S. Immler,
M. Ivanushkina,
T. Kennedy
, et al. (6 additional authors not shown)
Abstract:
We present the photometric calibration of the Swift UltraViolet/Optical Telescope (UVOT) which includes: optimum photometric and background apertures, effective area curves, colour transformations, conversion factors for count rates to flux, and the photometric zero points (which are accurate to better than 4 per cent) for each of the seven UVOT broadband filters. The calibration was performed w…
▽ More
We present the photometric calibration of the Swift UltraViolet/Optical Telescope (UVOT) which includes: optimum photometric and background apertures, effective area curves, colour transformations, conversion factors for count rates to flux, and the photometric zero points (which are accurate to better than 4 per cent) for each of the seven UVOT broadband filters. The calibration was performed with observations of standard stars and standard star fields that represent a wide range of spectral star types. The calibration results include the position dependent uniformity, and instrument response over the 1600-8000A operational range. Because the UVOT is a photon counting instrument, we also discuss the effect of coincidence loss on the calibration results. We provide practical guidelines for using the calibration in UVOT data analysis. The results presented here supersede previous calibration results.
△ Less
Submitted 9 November, 2007; v1 submitted 16 August, 2007;
originally announced August 2007.
-
The Two-Component Afterglow of Swift GRB 050802
Authors:
S. R. Oates,
M. De Pasquale,
M. J. Page,
A. J. Blustin,
S. Zane,
K. McGowan,
K. O. Mason,
T. S. Poole,
P. Schady,
P. W. A. Roming,
K. L. Page,
A. Falcone,
N. Gehrels
Abstract:
This paper investigates GRB 050802, one of the best examples of a it Swift gamma-ray burst afterglow that shows a break in the X-ray lightcurve, while the optical counterpart decays as a single power-law. This burst has an optically bright afterglow of 16.5 magnitude, detected throughout the 170-650nm spectral range of the UVOT on-board Swift. Observations began with the XRT and UVOT telescopes…
▽ More
This paper investigates GRB 050802, one of the best examples of a it Swift gamma-ray burst afterglow that shows a break in the X-ray lightcurve, while the optical counterpart decays as a single power-law. This burst has an optically bright afterglow of 16.5 magnitude, detected throughout the 170-650nm spectral range of the UVOT on-board Swift. Observations began with the XRT and UVOT telescopes 286s after the initial trigger and continued for 1.2 x 10^6s. The X-ray lightcurve consists of three power-law segments: a rise until 420s, followed by a slow decay with alpha_2 = 0.63 +/- 0.03 until 5000s, after which, the lightcurve decays faster with a slope of alpha_3 = 1.59 +/- 0.03. The optical lightcurve decays as a single power-law with alpha_O = 0.82 +/- 0.03 throughout the observation. The X-ray data on their own are consistent with the break at 5000s being due to the end of energy injection. Modelling the optical to X-ray spectral energy distribution, we find that the optical afterglow can not be produced by the same component as the X-ray emission at late times, ruling out a single component afterglow. We therefore considered two-component jet models and find that the X-ray and optical emission is best reproduced by a model in which both components are energy injected for the duration of the observed afterglow and the X-ray break at 5000s is due to a jet break in the narrow component. This bright, well-observed burst is likely a guide for interpreting the surprising finding of Swift that bursts seldom display achromatic jet breaks.
△ Less
Submitted 5 June, 2007;
originally announced June 2007.
-
Extreme Properties Of GRB061007: A Highly Energetic OR Highly Collimated Burst?
Authors:
P. Schady,
M. De Pasquale,
J. Cummings,
M. J. Page,
S. B. Pandey,
X. Y. Wang,
L. Vetere,
B. Zhang,
S. Zane,
A. Breeveld,
D. N. Burrows,
N. Gehrels,
C. Gronwall,
S. Hunsber ger,
C. Markwardt,
K. O. Mason,
P. Meszaros,
S. R. Oates,
C. Pagani,
T. S. Poole,
P. W. A. Roming,
P. Smith,
D. E. Vanden Berk
Abstract:
%auto-ignore This paper has been withdrawn by the authors due to dublicate submission. To download the paper please go to astro-ph/0611081
%auto-ignore This paper has been withdrawn by the authors due to dublicate submission. To download the paper please go to astro-ph/0611081
△ Less
Submitted 13 November, 2006; v1 submitted 2 November, 2006;
originally announced November 2006.
-
Extreme Properties Of GRB061007: A Highly Energetic Or A Highly Collimated Burst?
Authors:
P. Schady,
M. De Pasquale,
M. J. Page,
L. Vetere,
S. B. Pandey,
X. Y. Wang,
J. Cummings,
B. Zhang,
S. Zane,
A. Breeveld,
D. N. Burrows,
N. Gehrels. C. Gronwall,
S. Hunsberger,
C. Markwardt,
K. O. Mason,
P. Meszaros,
J. P. Norris,
S. R. Oates,
C. Pagani,
T. S. Poole,
P. W. A. Roming,
P. J. Smith,
D. E. Vanden Berk
Abstract:
GRB061007 is the brightest gamma-ray burst (GRB) to be detected by Swift and is accompanied by an exceptionally luminous afterglow that had a V-band magnitude <11.1 at 80s after the prompt emission. From the start of the Swift observations the afterglow decayed as a power law with a slope of α_X=1.66+/-0.01 in the X-ray and α_{opt}=1.64+/-0.01 in the UV/optical, up to the point that it was no lo…
▽ More
GRB061007 is the brightest gamma-ray burst (GRB) to be detected by Swift and is accompanied by an exceptionally luminous afterglow that had a V-band magnitude <11.1 at 80s after the prompt emission. From the start of the Swift observations the afterglow decayed as a power law with a slope of α_X=1.66+/-0.01 in the X-ray and α_{opt}=1.64+/-0.01 in the UV/optical, up to the point that it was no longer detected above background in the optical or X-ray bands. The brightness of this GRB and the similarity in the decay rate of the X-ray, optical and gamma-ray emission from 100s after the trigger distinguish this burst from others and present a challenge to the fireball model. The lack of a cooling or jet break in the afterglow up to \~10^5s constrains any model that can produce the large luminosity observed in GRB061007, which we found to require either an excessively large kinetic energy or highly collimated outflow. Analysis of the multi-wavelength spectral and high-resolution temporal data taken with Swift suggest an early time jet-break to be a more plausible scenario. This must have occurred within 80s of the prompt emission, which places an upper limit on the jet opening angle of θ_j=0.8deg. Such a highly collimated outflow resolves the energy budget problem presented in a spherical emission model, reducing the isotropic equivalent energy of this burst to E_γ^{corr}=10^{50} ergs; consistent with other GRBs.
△ Less
Submitted 21 June, 2007; v1 submitted 3 November, 2006;
originally announced November 2006.
-
Swift observations of GRB050712
Authors:
M. De Pasquale,
D. Grupe,
T. S. Poole,
A. A. Breeveld,
S. Zane,
S. R. Rosen,
M. J. Page,
K. O. Mason,
D. N. Burrows,
H. A. Krimm.,
N. Gehrels,
J. A. Nousek,
P. W. A. Roming,
S. Kobayashi,
B. Zhang
Abstract:
We present the results of X-ray and optical observations of GRB050712 performed by Swift. The X-ray lightcurve of this burst exhibits episodes of flares in the first 1000s, the same epoch at which the UVOT detected an optical counterpart. A shallow X-ray decay, with a decay slope of -0.73, followed and lasted ~70ks. This behaviour can be explained in terms of activity of GRB 'inner engine', with…
▽ More
We present the results of X-ray and optical observations of GRB050712 performed by Swift. The X-ray lightcurve of this burst exhibits episodes of flares in the first 1000s, the same epoch at which the UVOT detected an optical counterpart. A shallow X-ray decay, with a decay slope of -0.73, followed and lasted ~70ks. This behaviour can be explained in terms of activity of GRB 'inner engine', with the possibility of that the last flare is caused by the interaction of the ejecta with the surrounding medium. We also find interesting spectral parameters for the X-ray emission. In particular, data suggest the presence of an intrinsic absorption in the first 1000s, which can be explained if circumbust medium clouds lie along the line of sight.
△ Less
Submitted 4 May, 2006;
originally announced May 2006.
-
Structure and Evolution of Nearby OB Associations
Authors:
P. T. de Zeeuw,
A. G. A. Brown,
J. H. J. de Bruijne,
R. Hoogerwerf,
J. Lub,
R. S. Le Poole,
A. Blaauw
Abstract:
We present the first results of a comprehensive census of the stellar content of the nearby OB associations based on Hipparcos positions, proper motions and parallaxes for 12842 candidate member stars distributed over 21 fields on the sky. We use a new method to identify moving groups in these fields (see de Bruijne et al., these proceedings). Previously, astrometric membership in nearly all the…
▽ More
We present the first results of a comprehensive census of the stellar content of the nearby OB associations based on Hipparcos positions, proper motions and parallaxes for 12842 candidate member stars distributed over 21 fields on the sky. We use a new method to identify moving groups in these fields (see de Bruijne et al., these proceedings). Previously, astrometric membership in nearly all the nearby OB associations was known only for stars with spectral types earlier than B5. The Hipparcos measurements now allow us to identify members down to late F. This census provides a firm basis for studies of galactic and extragalactic star forming regions.
△ Less
Submitted 8 July, 1997;
originally announced July 1997.
