-
A comparison between the FENE-P and sPTT constitutive models in Large Amplitude Oscillatory Shear (LAOS)
Authors:
Thomas P John,
Robert J Poole,
Adam Kowalski,
Claudio P Fonte
Abstract:
The FENE-P and sPTT viscoelastic models are widely used for modelling of complex fluids. Although they are derived from distinct micro-structural theories, these models can become mathematically identical in steady and homogeneous flows with a particular choice of the value of the model parameters. However, even with this choice of parameter values, the model responses are known to differ from eac…
▽ More
The FENE-P and sPTT viscoelastic models are widely used for modelling of complex fluids. Although they are derived from distinct micro-structural theories, these models can become mathematically identical in steady and homogeneous flows with a particular choice of the value of the model parameters. However, even with this choice of parameter values, the model responses are known to differ from each other in transient flows. In this work, we investigate the responses of the FENE-P and sPTT constitutive models in Large Amplitude Oscillatory Shear (LAOS). In steady-shear, the shear stress scales with the non-dimensional group $Wi/(aL) \ (Wi\sqrtε)$ for the FENE-P (sPTT) model, where $Wi$ is the Weissenberg number, $L^2$ is the limit of extensibility in the FENE-P model ($a$ being $L^2/(L^2-3)$) and $ε$ is the extensibility parameter in the sPTT model. Our numerical and analytical results show that, in LAOS, the FENE-P model only shows this universality for large values of $L^2$ whereas the sPTT model shows this universality for all values of$ε$. In the strongly non-linear region, there is a drastic difference between the responses of the two models, with the FENE-P model exhibiting strong shear stress overshoots which manifest as self-intersecting secondary loops in the viscous Lissajous curves. We quantify the non-linearity exhibited by each constitutive model using the Sequence of Physical Processes framework. Despite the high degree of non-linearity exhibited by the FENE-P model, we also show using fully non-linear 1D simulations that it does not shear band in LAOS within the range of conditions studied.
△ Less
Submitted 1 September, 2023; v1 submitted 31 August, 2023;
originally announced August 2023.
-
Perspectives on viscoelastic flow instabilities and elastic turbulence
Authors:
Sujit S. Datta,
Arezoo M. Ardekani,
Paulo E. Arratia,
Antony N. Beris,
Irmgard Bischofberger,
Jens G. Eggers,
J. Esteban López-Aguilar,
Suzanne M. Fielding,
Anna Frishman,
Michael D. Graham,
Jeffrey S. Guasto,
Simon J. Haward,
Sarah Hormozi,
Gareth H. McKinley,
Robert J. Poole,
Alexander Morozov,
V. Shankar,
Eric S. G. Shaqfeh,
Amy Q. Shen,
Holger Stark,
Victor Steinberg,
Ganesh Subramanian,
Howard A. Stone
Abstract:
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h…
▽ More
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Cree** thermocapillary motion of a Newtonian droplet suspended in a viscoelastic fluid
Authors:
Paolo Capobianchi,
Mahdi Davoodi,
Robert J. Poole,
Marcello Lappa,
Alexander Morozov,
Mónica S. N. Oliveira
Abstract:
In this work we consider theoretically the problem of a Newtonian droplet moving in an otherwise quiescent infinite viscoelastic fluid under the influence of an externally applied temperature gradient. The outer fluid is modelled by the Oldroyd-B equation, and the problem is solved for small Weissenberg and Capillary numbers in terms of a double perturbation expansion.
We assume microgravity con…
▽ More
In this work we consider theoretically the problem of a Newtonian droplet moving in an otherwise quiescent infinite viscoelastic fluid under the influence of an externally applied temperature gradient. The outer fluid is modelled by the Oldroyd-B equation, and the problem is solved for small Weissenberg and Capillary numbers in terms of a double perturbation expansion.
We assume microgravity conditions and neglect the convective transport of energy and momentum. We derive expressions for the droplet migration speed and its shape in terms of the properties of both fluids. In the absence of shape deformation, the droplet speed decreases monotonically for sufficiently viscous inner fluids, while for fluids with a smaller inner-to-outer viscosity ratio, the droplet speed first increases and then decreases as a function of the Weissenberg number. For small but finite values of the Capillary number, the droplet speed behaves monotonically as a function of the applied temperature gradient for a fixed ratio of the Capillary and Weissenberg numbers. We demonstrate that this behaviour is related to the polymeric stresses deforming the droplet in the direction of its migration, while the associated changes in its speed are Newtonian in nature, being related to a change in the droplet's hydrodynamic resistance and its internal temperature distribution. When compared to the results of numerical simulations, our theory exhibits a good predictive power for sufficiently small values of the Capillary and Weissenberg numbers.
△ Less
Submitted 13 December, 2023; v1 submitted 11 August, 2020;
originally announced August 2020.
-
Secondary flows of viscoelastic fluids in serpentine microchannels
Authors:
Lucie Ducloue,
Laura Casanellas,
Simon J. Haward,
Robert J. Poole,
Manuel A. Alves,
Sandra Lerouge,
Amy Q. Shen,
Anke Lindner
Abstract:
Secondary flows are ubiquitous in channel flows, where small velocity components perpendicular to the main velocity appear due to the complexity of the channel geometry and/or that of the flow itself such as from inertial or non-Newtonian effects, etc. We investigate here the inertialess secondary flow of viscoelastic fluids in curved microchannels of rectangular cross-section and constant but alt…
▽ More
Secondary flows are ubiquitous in channel flows, where small velocity components perpendicular to the main velocity appear due to the complexity of the channel geometry and/or that of the flow itself such as from inertial or non-Newtonian effects, etc. We investigate here the inertialess secondary flow of viscoelastic fluids in curved microchannels of rectangular cross-section and constant but alternating curvature: the so-called "serpentine channel" geometry. Numerical calculations (Poole et al, 2013) have shown that in this geometry, in the absence of elastic instabilities, a steady secondary flow develops that takes the shape of two counter-rotating vortices in the plane of the channel cross-section. We present the first experimental visualization evidence and characterization of these steady secondary flows, using a complementarity of microPIV in the plane of the channel, and confocal visualisation of dye-stream transport in the cross-sectional plane. We show that the measured streamlines and the relative velocity magnitude of the secondary flows are in qualitative agreement with the numerical results. In addition to our techniques being broadly applicable to the characterisation of three-dimensional flow structures in microchannels, our results are important for understanding the onset of instability in serpentine viscoelastic flows.
△ Less
Submitted 12 February, 2019; v1 submitted 29 October, 2018;
originally announced October 2018.
-
Turbulent duct flow with polymers
Authors:
Armin Shahmardi,
Sagar Zade,
Mehdi N. Ardekani,
Rob J. Poole,
Fredrik Lundell,
Marco Edoardo Rosti,
Luca Brandt
Abstract:
We have performed direct numerical simulation of the turbulent flow of a polymer solution in a square duct, with the FENE-P model used to simulate the presence of polymers. First, a simulation at a fixed moderate Reynolds number is performed and its results compared with those of a Newtonian fluid to understand the mechanism of drag reduction and how the secondary motion, typical of the turbulent…
▽ More
We have performed direct numerical simulation of the turbulent flow of a polymer solution in a square duct, with the FENE-P model used to simulate the presence of polymers. First, a simulation at a fixed moderate Reynolds number is performed and its results compared with those of a Newtonian fluid to understand the mechanism of drag reduction and how the secondary motion, typical of the turbulent flow in non-axisymmetric ducts, is affected by polymer additives. Our study shows that the Prandtl's secondary flow is modified by the polymers: the circulation of the streamwise main vortices increases and the location of the maximum vorticity move towards the center of the duct. In-plane fluctuations are reduced while the streamwise ones are enhanced in the center of the duct and dumped in the corners due to a substantial modification of the quasi-streamwise vortices and the associated near-wall low- and high-speed streaks; these grow in size and depart from the walls, their streamwise coherency increasing. Finally, we investigated the effect of the parameters defining the viscoelastic behavior of the flow and found that the Weissenberg number strongly influences the flow, with the cross-stream vortical structures growing in size and the in-plane velocity fluctuations reducing for increasing flow elasticity.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Bundling of elastic filaments induced by hydrodynamic interactions
Authors:
Yi Man,
William Page,
Robert J. Poole,
Eric Lauga
Abstract:
Peritrichous bacteria swim in viscous fluids by rotating multiple helical flagellar filaments. As the bacterium swims forward, all its flagella rotate in synchrony behind the cell in a helical bundle. When the bacterium changes its direction, the flagellar filaments unbundle and reorient the cell for a short period of time before returning to their bundled state and resuming swimming. This rapid b…
▽ More
Peritrichous bacteria swim in viscous fluids by rotating multiple helical flagellar filaments. As the bacterium swims forward, all its flagella rotate in synchrony behind the cell in a helical bundle. When the bacterium changes its direction, the flagellar filaments unbundle and reorient the cell for a short period of time before returning to their bundled state and resuming swimming. This rapid bundling and unbundling is, at its heart, a mechanical process whereby hydrodynamic interactions balance with elasticity to determine the time-varying deformation of the filaments. Inspired by this biophysical problem, we present in this paper what is perhaps the simplest model of bundling whereby two, or more, straight elastic filaments immersed in a viscous fluid rotate about their centreline, inducing rotational flows which tend to bend the filaments around each other. We derive an integro-differential equation governing the shape of the filaments resulting from mechanical balance in a viscous fluid at low Reynolds number. We show that such equation may be evaluated asymptotically analytically in the long-wavelength limit, leading to a local partial differential equation governed by a single dimensionless Bundling number. A numerical study of the dynamics predicted by the model reveals the presence of two configuration instabilities with increasing Bundling numbers: first to a crossing state where filaments touch at one point and then to a bundled state where filaments wrap along each other in a helical fashion. We next provide an intuitive physical model for the crossing instability and show that it may be used to predict analytically its threshold, and adapted to address the transition to a bundling state. We then use a macro-scale experimental implementation of the two-filament configuration in order to validate our theoretical predictions and obtain excellent agreement.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Lid-driven cavity flow of viscoelastic liquids
Authors:
R. G. Sousa,
R. J. Poole,
A. M. Afonso,
F. T. Pinho,
P. J. Oliveira,
A. Morozov,
M. A. Alves
Abstract:
The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to p…
▽ More
The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to probe the effect of viscoelasticity on the appearance of such instabilities in two-dimensional lid-driven cavities for a wide range of aspect ratios (0.125 < height/length < 4.0), at different Deborah numbers under cree**-flow conditions and to understand the effects of regularization of the lid velocity. The effect of the viscoelasticity on the steady-state results and on the critical conditions for the onset of the elastic instabilities are described and compared to experimental results.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Enhanced Microfluidic Mixing via a Tricritical Spiral Vortex Instability
Authors:
Simon J. Haward,
Robert J. Poole,
Manuel A. Alves,
Paulo J. Oliveira,
Nigel Goldenfeld,
Amy Q. Shen
Abstract:
Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaki…
▽ More
Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaking bifurcation (though remains steady and laminar) and a spiral vortex structure develops about the central axis of the outflow channel. An order parameter characterizing the instability grows according to a sixth-order Landau potential, and shows a progression from second order to first order transitions as alpha increases. A tricritical point occurs for alpha ~ 0.55. The spiral vortex acts as a mixing region in the flow field and this phenomenon can be used to drive enhanced mixing in microfluidic devices.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
Serpentine channels: micro -- rheometers for fluid relaxation times
Authors:
Josephine Zilz,
Christof Schäfer,
Christian Wagner,
Robert J. Poole,
Manuel A. Alves,
Anke Lindner
Abstract:
We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple s…
▽ More
We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple scaling arguments with relaxation times obtained from first normal-stress difference data measured in a classical shear rheometer. As an additional check we also compare these relaxation times to those obtained from Zimm theory and good agreement is observed. Once calibrated, we show how the serpentine rheometer can be used to access smaller polymer concentrations and lower solvent viscosities where classical measurements become difficult or impossible to use due to inertial and/or resolution limitations. In the absence of calibration the serpentine channel can still be a very useful comparative or index device.
△ Less
Submitted 6 October, 2013;
originally announced October 2013.
-
Geometric scaling of purely-elastic flow instabilities
Authors:
J. Zilz,
R. J. Poole,
M. A. Alves,
D. Bartolo,
B. Levache,
A. Lindner
Abstract:
We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a s…
▽ More
We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a simple theoretical analysis, based on the dimensionless criterion proposed by Pakdel-McKinley for onset of a purely-elastic instability.
△ Less
Submitted 23 September, 2011;
originally announced September 2011.
