-
Development Considerations for High-Repetition-Rate HEDP Experiments
Authors:
Scott Feister,
Patrick L. Poole,
Peter V. Heuer
Abstract:
This paper discusses experimental techniques and considerations associated with the transition to high repetition-rate experiments in High Energy Density Physics (HEDP). We particularly highlight approaches to experimentation that become practical only at a threshold of repetition rate. We focus on the transition from operation at several-shots-per-day towards operation in the range of 1/min. to 1…
▽ More
This paper discusses experimental techniques and considerations associated with the transition to high repetition-rate experiments in High Energy Density Physics (HEDP). We particularly highlight approaches to experimentation that become practical only at a threshold of repetition rate. We focus on the transition from operation at several-shots-per-day towards operation in the range of 1/min. to 1 Hz.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
On-Shot Characterization of Single Plasma Mirror Temporal Contrast Improvement
Authors:
Lieselotte Obst,
Josefine Metzkes-Ng,
Stefan Bock,
Ginevra E. Cochran,
Thomas E. Cowan,
Thomas Oksenhendler,
Patrick L. Poole,
Irene Prencipe,
Martin Rehwald,
Christian Rödel,
Hans-Peter Schlenvoigt,
Ulrich Schramm,
Douglass W. Schumacher,
Tim Ziegler,
Karl Zeil
Abstract:
We report on the setup and commissioning of a compact recollimating single plasma mirror for temporal contrast enhancement at the Draco 150 TW laser during laser-proton acceleration experiments. The temporal contrast with and without plasma mirror is characterized single-shot by means of self-referenced spectral interferometry with extended time excursion (SRSI-ETE) at unprecedented dynamic and te…
▽ More
We report on the setup and commissioning of a compact recollimating single plasma mirror for temporal contrast enhancement at the Draco 150 TW laser during laser-proton acceleration experiments. The temporal contrast with and without plasma mirror is characterized single-shot by means of self-referenced spectral interferometry with extended time excursion (SRSI-ETE) at unprecedented dynamic and temporal range. This allows for the first single-shot measurement of the plasma mirror trigger point, which is interesting for the quantitative investigation of the complex pre-plasma formation process at the surface of the target used for proton acceleration. As a demonstration of high contrast laser plasma interaction we present proton acceleration results with ultra-thin liquid crystal targets of ~ 1 $μ$m down to 10 nm thickness. Focus scans of different target thicknesses show that highest proton energies are reached for the thinnest targets at best focus. This indicates that the contrast enhancement is effective such that the acceleration process is not limited by target pre-expansion induced by laser light preceding the main laser pulse.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Relativistic laser driven electron accelerator using micro-channel plasma targets
Authors:
Joseph Snyder,
Liangliang Ji,
Kevin M. George,
Christopher Willis,
Ginevra E. Cochran,
Rebecca Daskalova,
Abraham Handler,
Trevor Rubin,
Patrick L. Poole,
Derek Nasir,
Anthony Zingale,
Enam Chowdhury,
Baifei Shen,
Douglass W. Schumacher
Abstract:
We present an experimental demonstration of the efficient acceleration of electrons beyond 60 MeV using micro-channel plasma targets. We employed a high-contrast, 2.5 J, 32 fs short pulse laser interacting with a 5 μm inner diameter, 300 μm long micro-channel plasma target. The micro-channel was aligned to be collinear with the incident laser pulse, confining the majority of the laser energy withi…
▽ More
We present an experimental demonstration of the efficient acceleration of electrons beyond 60 MeV using micro-channel plasma targets. We employed a high-contrast, 2.5 J, 32 fs short pulse laser interacting with a 5 μm inner diameter, 300 μm long micro-channel plasma target. The micro-channel was aligned to be collinear with the incident laser pulse, confining the majority of the laser energy within the channel. The measured electron spectrum showed a large increase of the cut-off energy and slope temperature when compared to that from a 2 μm flat Copper target, with the cutoff energy enhanced by over 2.6 times and the total energy in electrons >5 MeV enhanced by over 10 times. Three-dimensional particle-in-cell simulations confirm efficient direct laser acceleration enabled by the novel structure as the dominant acceleration mechanism for the high energy electrons. The simulations further reveal the guiding effect of the channel that successfully explains preferential acceleration on the laser/channel axis observed in experiments. Finally, systematic simulations provide scalings for the energy and charge of the electron pulses. Our results show that the micro-channel plasma target is a promising electron source for applications such as ion acceleration, Bremsstrahlung X-ray radiation, and THZ generation.
△ Less
Submitted 2 January, 2019;
originally announced January 2019.
-
Study of accelerated ion energy and spatial distribution with variable thickness liquid crystal targets
Authors:
P. L. Poole,
C. Willis,
C. D. Andereck,
L. Van Woerkom,
D. W. Schumacher
Abstract:
We report on laser-based ion acceleration using freely suspended liquid crystal film targets, formed with thicknesses varying from 100 $nm$ to 2 $μm$ for this experiment. Optimization of Target Normal Sheath Acceleration (TNSA) of protons is shown using a 1 $\times$ $10^{20}$ $W/cm^2$, 30 fs laser with intensity contrast better than $10^{-7}:1$. The optimum thickness was near 700 $nm$, resulting i…
▽ More
We report on laser-based ion acceleration using freely suspended liquid crystal film targets, formed with thicknesses varying from 100 $nm$ to 2 $μm$ for this experiment. Optimization of Target Normal Sheath Acceleration (TNSA) of protons is shown using a 1 $\times$ $10^{20}$ $W/cm^2$, 30 fs laser with intensity contrast better than $10^{-7}:1$. The optimum thickness was near 700 $nm$, resulting in a proton energy maximum of 24 $MeV$. Radiochromic film (RCF) was employed on both the laser and target normal axes, revealing minimal laser axis signal but a striking ring distribution in the low energy target normal ion signature that varies with liquid crystal thickness. Discussion of this phenomenon and a comparison to similar observations on other laser systems is included.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
In-situ, variable thickness, liquid crystal film target inserter for moderate repetition rate intense laser applications
Authors:
P. L. Poole,
C. Willis,
G. E. Cochran,
R. J. Hanna,
C. D. Andereck,
D. W. Schumacher
Abstract:
Liquid crystal films have recently been demonstrated as variable thickness, planar targets for ultra-intense laser matter experiments and applications such as ion acceleration. By controlling the parameters of film formation, including liquid crystal temperature and volume, their thickness can be varied on-demand from 10 $nm$ to above 10 $μm$. This thickness range enables for the first time real-t…
▽ More
Liquid crystal films have recently been demonstrated as variable thickness, planar targets for ultra-intense laser matter experiments and applications such as ion acceleration. By controlling the parameters of film formation, including liquid crystal temperature and volume, their thickness can be varied on-demand from 10 $nm$ to above 10 $μm$. This thickness range enables for the first time real-time selection and optimization of various ion acceleration mechanisms using low cost, high quality targets. Our previous work employed these targets in single shot configuration, requiring chamber cycling after the pre-made films were expended. Presented here is a film formation device capable of drawing films from a bulk liquid crystal source volume to any thickness in the aforementioned range. This device will form films under vacuum within 2 $μm$ of the same location each time, well within the Rayleigh range of even tight $F/ \#$ systems. The repetition rate of the device exceeds 0.1 $Hz$ for sub-100 $nm$ films, enabling inexpensive, moderate repetition rate plasma target insertion for state of the art lasers currently in use or under development. Characterization tests of the device performed at the Scarlet laser facility at Ohio State will be presented.
△ Less
Submitted 18 August, 2015; v1 submitted 29 July, 2015;
originally announced July 2015.
-
Liquid crystal films as on-demand, variable thickness (50-5000 nm) targets for intense lasers
Authors:
P. L. Poole,
C. D. Andereck,
D. W. Schumacher,
R. L. Daskalova,
S. Feister,
K. M. George,
C. Willis,
K. U. Akli,
E. A. Chowdhury
Abstract:
We have developed a new type of target for intense laser-matter experiments that offers significant advantages over those currently in use. The targets consist of a liquid crystal film freely suspended within a metal frame. They can be formed rapidly on-demand with thicknesses ranging from nanometers to micrometers, where the particular value is determined by the liquid crystal temperature and ini…
▽ More
We have developed a new type of target for intense laser-matter experiments that offers significant advantages over those currently in use. The targets consist of a liquid crystal film freely suspended within a metal frame. They can be formed rapidly on-demand with thicknesses ranging from nanometers to micrometers, where the particular value is determined by the liquid crystal temperature and initial volume as well as by the frame geometry. The liquid crystal used for this work, 8CB (4'-octyl-4-cyanobiphenyl), has a vapor pressure below $10^{-6}$ Torr, so films made at atmospheric pressure maintain their initial thickness after pum** to high vacuum. Additionally, the volume per film is such that each target costs significantly less than one cent to produce. The mechanism of film formation and relevant physics of liquid crystals are described, as well as ion acceleration data from the first shots on liquid crystal film targets at the Ohio State University Scarlet laser facility.
△ Less
Submitted 22 May, 2014;
originally announced May 2014.