-
Force on a sphere suspended in flowing granulate
Authors:
**g Wang,
Bo Fan,
Tivadar Pongó,
Tamás Börzsönyi,
Raúl Cruz Hidalgo,
Ralf Stannarius
Abstract:
We investigate the force of flowing granular material on an obstacle. A sphere suspended in a discharging silo experiences both the weight of the overlaying layers and drag of the surrounding moving grains. In experiments with frictional hard glass beads, the force on the obstacle was practically flow-rate independent. In contrast, flow of nearly frictionless soft hydrogel spheres added drag to th…
▽ More
We investigate the force of flowing granular material on an obstacle. A sphere suspended in a discharging silo experiences both the weight of the overlaying layers and drag of the surrounding moving grains. In experiments with frictional hard glass beads, the force on the obstacle was practically flow-rate independent. In contrast, flow of nearly frictionless soft hydrogel spheres added drag to the gravitational force. The dependence of the total force on the obstacle diameter is qualitatively different for the two types of material: It grows quadratically with the obstacle diameter in the soft, low friction material, while it grows much weaker, nearly linearly with the obstacle diameter, in the bed of glass spheres. In addition to the drag, the obstacle embedded in flowing low-friction soft particles experiences a total force from the top as if immersed in a hydrostatic pressure profile, but a much lower counterforce acting from below. In contrast, when embedded in frictional, hard particles, a strong pressure gradient forms near the upper obstacle surface.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Discharge of elongated grains in silos under rotational shear
Authors:
Tivadar Pongó,
Tamás Börzsönyi,
Raúl Cruz Hidalgo
Abstract:
The discharge of elongated particles from a silo with rotating bottom is investigated numerically. The introduction of a slight transverse shear reduces the flow rate $Q$ by up to 70% compared to stationary bottom, but the flow rate shows a modest increase by further increasing the external shear. Focusing on the dependency of flow rate $Q$ on orifice diameter $D$, the spheres and rods show two di…
▽ More
The discharge of elongated particles from a silo with rotating bottom is investigated numerically. The introduction of a slight transverse shear reduces the flow rate $Q$ by up to 70% compared to stationary bottom, but the flow rate shows a modest increase by further increasing the external shear. Focusing on the dependency of flow rate $Q$ on orifice diameter $D$, the spheres and rods show two distinct trends. For rods, in the small aperture limit $Q$ seems to follow an exponential trend, deviating from the classical power-law dependence. These macroscopic observations are in good agreement with our earlier experimental findings [Phys. Rev. E $\textbf{103}$, 062905 (2021)]. With the help of the coarse-graining methodology we obtain the spatial distribution of the macroscopic density, velocity, kinetic pressure, and orientation fields. This allows us detecting a transition from funnel to mass flow pattern, caused by the external shear. Additionally, averaging these fields in the region of the orifice reveals that the strong initial decrease in $Q$ is mostly attributed to changes in the flow velocity, while the weakly increasing trend at higher rotation rates is related to increasing packing fraction. Similar analysis of the grain orientation at the orifice suggests a correlation of the flow rate magnitude with the vertical orientation and the packing fraction at the orifice with the order of the grains. Lastly, the vertical profile of mean acceleration at the center of the silo denotes that the region where the acceleration is not negligible shrinks significantly due to the strong perturbation induced by the moving wall.
△ Less
Submitted 25 October, 2022;
originally announced October 2022.
-
Discharge of elongated grains from silo with rotating bottom
Authors:
Kiwing To,
Yi-Kai Mo,
Tivadar Pongó,
Tamás Börzsönyi
Abstract:
We study the flow of elongated grains (wooden pegs of length $L$=20 mm with circular cross section of diameter $d_c$=6 and 8 mm) from a silo with a rotating bottom and a circular orifice of diameter $D$. In the small orifice range ($D/d<5$) clogs are mostly broken by the rotating base, and the flow is intermittent with avalanches and temporary clogs. Here $d\equiv(\frac{3}{2}d_c^2L)^{1/3}$ is the…
▽ More
We study the flow of elongated grains (wooden pegs of length $L$=20 mm with circular cross section of diameter $d_c$=6 and 8 mm) from a silo with a rotating bottom and a circular orifice of diameter $D$. In the small orifice range ($D/d<5$) clogs are mostly broken by the rotating base, and the flow is intermittent with avalanches and temporary clogs. Here $d\equiv(\frac{3}{2}d_c^2L)^{1/3}$ is the effective grain diameter. Unlike for spherical grains, for rods the flow rate $W$ clearly deviates from the power law dependence $W\propto (D-kd)^{2.5}$ at lower orifice sizes in the intermittent regime, where $W$ is measured in between temporary clogs only. Instead, below about $D/d<3$ an exponential dependence $W\propto e^{κD}$ is detected. Here $k$ and $κ$ are constants of order unity. Even more importantly, rotating the silo base leads to a strong -- more than 50% -- decrease of the flow rate, which otherwise does not depend significantly on the value of $ω$ in the continuous flow regime. In the intermittent regime, $W(ω)$ appears to follow a non-monotonic trend, although with considerable noise. A simple picture, in terms of the switching from funnel flow to mass flow and the alignment of the pegs due to rotation, is proposed to explain the observed difference between spherical and elongated grains. We also observe shear induced orientational ordering of the pegs at the bottom such that their long axes in average are oriented at a small angle $\langleθ\rangle \approx 15^\circ$ to the motion of the bottom.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
Particle flow rate in silos under rotational shear
Authors:
D. Hernández-Delfin,
T. Pongó,
K. To,
T. Börzsönyi,
R. C. Hidalgo
Abstract:
Very recently, To et al.~have experimentally explored granular flow in a cylindrical silo, with a bottom wall that rotates horizontally with respect to the lateral wall \cite{Kiwing2019}. Here, we numerically reproduce their experimental findings, in particular, the peculiar behavior of the mass flow rate $Q$ as a function of the frequency of rotation $f$. Namely, we find that for small outlet dia…
▽ More
Very recently, To et al.~have experimentally explored granular flow in a cylindrical silo, with a bottom wall that rotates horizontally with respect to the lateral wall \cite{Kiwing2019}. Here, we numerically reproduce their experimental findings, in particular, the peculiar behavior of the mass flow rate $Q$ as a function of the frequency of rotation $f$. Namely, we find that for small outlet diameters $D$ the flow rate increased with $f$, while for larger $D$ a non-monotonic behavior is confirmed. Furthermore, using a coarse-graining technique, we compute the macroscopic density, momentum, and the stress tensor fields. These results show conclusively that changes in the discharge process are directly related to changes in the flow pattern from funnel flow to mass flow. Moreover, by decomposing the mass flux (linear momentum field) at the orifice into two main factors: macroscopic velocity and density fields, we obtain that the non-monotonic behavior of the linear momentum is caused by density changes rather than by changes in the macroscopic velocity. In addition, by analyzing the spatial distribution of the kinetic stress, we find that for small orifices increasing rotational shear enhances the mean kinetic pressure $\langle p^k \rangle$ and the system dilatancy. This reduces the stability of the arches, and, consequently, the volumetric flow rate increases monotonically. For large orifices, however, we detected that $\langle p^k \rangle$ changes non-monotonically, which might explain the non-monotonic behavior of $Q$ when varying the rotational shear.
△ Less
Submitted 29 April, 2021;
originally announced April 2021.
-
Flow in an hourglass: particle friction and stiffness matter
Authors:
Tivadar Pongó,
Viktória Stiga,
János Török,
Sára Lévay,
Balázs Szabó,
Ralf Stannarius,
Raúl Cruz Hidalgo,
Tamás Börzsönyi
Abstract:
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pr…
▽ More
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pressure of the order of 4 kPa lowering the friction coefficient leads to a gradual change in the discharge curve: the flow rate becomes filling height dependent, it decreases during the discharge process. For hard grains with a Young's modulus of about $Y_m\approx 500$ MPa the flow rate is much less sensitive to the value of the friction coefficient. Using DEM data combined with a coarse-graining methodology allows us to compute all the relevant macroscopic fields, namely, linear momentum, density and stress tensors. The observed difference in the discharge in the low friction limit is connected to a strong difference in the pressure field: while for hard grains Janssen-screening is effective, leading to high vertical stress near the silo wall and small pressure above the orifice region, for deformable grains the pressure above the orifice is larger and gradually decreases during the discharge process. We have analyzed the momentum balance in the region of the orifice (near the location of the outlet) for the case of soft particles with low friction coefficient, and proposed a phenomenological formulation that predicts the linear decrease of the flow rate with decreasing filling height.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Silo discharge of mixtures of soft and rigid grains
Authors:
**g Wang,
Bo Fan,
Tivadar Pongó,
Kirsten Harth,
Torsten Trittel,
Ralf Stannarius,
Maja Illig,
Tamás Börzsönyi,
Raúl Cruz Hidalgo
Abstract:
We study the outflow dynamics and clogging phenomena of mixtures of soft, elastic low-friction spherical grains and hard frictional spheres of similar size in a quasi-two-dimensional (2D) silo with narrow orifice at the bottom. Previous work has demonstrated the crucial influence of elasticity and friction on silo discharge. We show that the addition of small amounts, even as low as 5\%, of hard g…
▽ More
We study the outflow dynamics and clogging phenomena of mixtures of soft, elastic low-friction spherical grains and hard frictional spheres of similar size in a quasi-two-dimensional (2D) silo with narrow orifice at the bottom. Previous work has demonstrated the crucial influence of elasticity and friction on silo discharge. We show that the addition of small amounts, even as low as 5\%, of hard grains to an ensemble of soft, low-friction grains already has significant consequences. The mixtures allow a direct comparison of the probabilities of the different types of particles to clog the orifice. We analyze these probabilities for the hard, frictional and the soft, slippery grains on the basis of their participation in the blocking arches, and compare outflow velocities and durations of non-permanent clogs for different compositions of the mixtures. Experimental results are compared with numerical simulations. The latter strongly suggest a significant influence of the inter-species particle friction.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
