-
Tailoring wetting properties of organic hole-transport interlayers for slot-die coated perovskite solar modules
Authors:
T. S. Le,
I. A. Chuykoa,
L. O. Luchnikova,
K. A. Ilicheva,
P. O. Sukhorukova,
D. O. Balakirev,
N. S. Saratovsky,
A. O. Alekseev,
S. S. Kozlov,
D. S. Muratov,
V. V. Voronov,
P. A. Gostishchev,
D. A. Kiselev,
T. S. Ilina,
A. A. Vasilev,
A. Y. Polyakov,
E. A. Svidchenko,
O. A. Maloshitskaya,
Yu. N. Luponosov,
D. S. Saranin
Abstract:
The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrat…
▽ More
The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrate a triphenylamine-based polymer, pTPA-TDP, blended with SAM based on 5-[4-[4-(diphenylamino) phenyl] thiophene-2-carboxylic acid (TPATC), to address the challenges of uniform slot-die coating and interface passivation in large-area modules. We fabricated p-i-n oriented PSMs on 50x50 mm2 substrates (12-sub-cells) with NiO hole transport layer (HTL) and organic interlayers for surface modification. Wetting angle map** demonstrated that ununiform regions of the slot-die coated SAM have hydrophobicity with contact angle values up to 90°, causing fluctuations in absorber thickness and the presence of macro-defects at buried interfaces. The incorporation of the blended interlayer to NiO/perovskite junction homogenized the surface wettability (contact angle=40°) and mitigated lattice strain in the absorber. This enabled the effective use of SAM properties on a large-area surface, improving energy level alignment and enhancing the power conversion efficiency (PCE) of the modules from 13.98% to 15.83% and stability (ISOS-L-2, T80 period) from 500-1000 hours to 1630 hours. Investigation of PSMs upon cooling till -5 °C showed that the PCE increased by +0.19%/°C for samples with NiO HTL, while using SAM and blended interlayers raised the coefficient to ~0.40%/°C due to changes in activation energy and trap contributions to device performance across a wide temperature range.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Defect-assisted reversible phase transition in mono- and few-layer ReS$_2$
Authors:
George Zograf,
Andrew B. Yankovich,
Betül Küçüköz,
Abhay V. Agrawal,
Alexander Yu. Polyakov,
Joachim Ciers,
Fredrik Eriksson,
Åsa Haglund,
Paul Erhart,
Tomasz J. Antosiewicz,
Eva Olsson,
Timur O. Shegai
Abstract:
Transition metal dichalcogenide (TMD) materials have attracted substantial interest due to their remarkable excitonic, optical, electrical, and mechanical properties, which are highly dependent on their crystal structure. Controlling the crystal structure of these materials is essential for fine-tuning their performance, $\textit{e.g.}$, linear and nonlinear optical, as well as charge transport pr…
▽ More
Transition metal dichalcogenide (TMD) materials have attracted substantial interest due to their remarkable excitonic, optical, electrical, and mechanical properties, which are highly dependent on their crystal structure. Controlling the crystal structure of these materials is essential for fine-tuning their performance, $\textit{e.g.}$, linear and nonlinear optical, as well as charge transport properties. While various phase-switching TMD materials, like molybdenum telluride (MoTe$_2$), are available, their transitions are often irreversible. Here, we investigate the mechanism of a light-induced reversible phase transition in mono- and bilayer flakes of rhenium disulfide (ReS$_2$). Our observations, based on scanning transmission electron microscopy, nonlinear spectroscopy, and density functional theory calculations, reveal a transition from the ground T$''$ (double distorted T) to the metastable H$'$ (distorted H) phase under femtosecond laser irradiation or influence of highly-energetic electrons. We show that the formation of sulfur vacancies facilitates this phenomenon. Our findings pave the way towards actively manipulating the crystal structure of ReS$_2$ and possibly its heterostructures.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Quantum trap** and rotational self-alignment in triangular Casimir microcavities
Authors:
Betül Küçüköz,
Oleg V. Kotov,
Adriana Canales,
Alexander Yu. Polyakov,
Abhay V. Agrawal,
Tomasz J. Antosiewicz,
Timur O. Shegai
Abstract:
Casimir torque -- a rotational motion caused by the minimization of the zero-point energy -- is a problem that attracts significant theoretical and experimental interest. Recently, it has been realized using liquid crystal phases and natural anisotropic substrates. However, for natural materials, the torque reaches substantial values only at van der Waals distances of ~10 nm. Here, we employ Casim…
▽ More
Casimir torque -- a rotational motion caused by the minimization of the zero-point energy -- is a problem that attracts significant theoretical and experimental interest. Recently, it has been realized using liquid crystal phases and natural anisotropic substrates. However, for natural materials, the torque reaches substantial values only at van der Waals distances of ~10 nm. Here, we employ Casimir self-assembly using templated gold nanostructures of triangular symmetry for the purpose of rotational self-alignment at truly Casimir distances (100 -- 200 nm separation). The joint action of repulsive electrostatic and attractive Casimir potentials leads to the formation of a stable quantum trap, giving rise to a tunable Fabry-Perot microcavity. This cavity self aligns both laterally and rotationally to maximize the overlap area between the templated and floating triangular flakes. The rotational self-alignment is remarkably sensitive to the equilibrium distance between the two triangles as well as their area, which opens possibilities for active control through manipulating the electrostatic screening. Our self-assembled and self-aligned Casimir microcavities could find future use as a versatile and tunable platform for nanophotonic, polaritonic, and optomechanical applications.
△ Less
Submitted 6 May, 2024; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Combining ultrahigh index with exceptional nonlinearity in resonant transition metal dichalcogenide nanodisks
Authors:
George Zograf,
Alexander Yu. Polyakov,
Maria Bancerek,
Tomasz Antosiewicz,
Betul Kucukoz,
Timur Shegai
Abstract:
Second-order nonlinearity in solids gives rise to a plethora of unique physical phenomena ranging from piezoelectricity and optical rectification to optical parametric amplification, spontaneous parametric down-conversion, and the generation of entangled photon pairs. Monolayer transition metal dichalcogenides (TMDs), such as MoS$_2$, exhibit one of the highest known second-order nonlinear coeffic…
▽ More
Second-order nonlinearity in solids gives rise to a plethora of unique physical phenomena ranging from piezoelectricity and optical rectification to optical parametric amplification, spontaneous parametric down-conversion, and the generation of entangled photon pairs. Monolayer transition metal dichalcogenides (TMDs), such as MoS$_2$, exhibit one of the highest known second-order nonlinear coefficients. However, the monolayer nature of these materials prevents the fabrication of resonant objects exclusively from the material itself, necessitating the use of external structures to achieve optical enhancement of nonlinear processes. Here, we exploit the 3R phase of a molybdenum disulfide multilayer for resonant nonlinear nanophotonics. The lack of inversion symmetry, even in the bulk of the material, provides a combination of a massive second-order susceptibility, an extremely high and anisotropic refractive index in the near-infrared region ($n>$~4.5), and low absorption losses, making 3R-MoS$_2$ highly attractive for nonlinear nanophotonics. We demonstrate this by fabricating 3R-MoS$_2$ nanodisks of various radii, which support resonant anapole states, and observing substantial ($>$ 100-fold) enhancement of second-harmonic generation in a single resonant nanodisk compared to an unpatterned flake of the same thickness. The enhancement is maximized at the spectral overlap between the anapole state of the disk and the material resonance of the second-order susceptibility. Our approach unveils a powerful tool for enhancing the entire spectrum of optical second-order nonlinear processes in nanostructured van der Waals materials, thereby paving the way for nonlinear and quantum high-index TMD-nanophotonics.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Deep-level transient spectroscopy of the charged defects in p-i-n perovskite solar cells induced by light-soaking
Authors:
A. A. Vasilev,
D. S. Saranin,
P. A. Gostishchev,
M. P. Tuhova,
S. I. Didenko,
A. Y. Polyakov,
A. Di Carlo
Abstract:
The long-term stability of halide perovskite solar cells (PSCs) remains the critical problem of this photovoltaic technology. Different structural defects formed in the thin-film perovskite films were considered as a main trigger for the decomposition of the absorber and corrosion of the interfaces in the device structure. The changes in the stability performance of the PSCs require a detailed ana…
▽ More
The long-term stability of halide perovskite solar cells (PSCs) remains the critical problem of this photovoltaic technology. Different structural defects formed in the thin-film perovskite films were considered as a main trigger for the decomposition of the absorber and corrosion of the interfaces in the device structure. The changes in the stability performance of the PSCs require a detailed analysis of the defects generated under external stress (light and heat). Using admittance, deep-level transient spectroscopy (DLTS) and reverse DLTS we determined the evolution of the defect energy levels in p-i-n PCS under continuous light soaking stress. We compared the impact of the charged defects on the performance and long-term stability of the CsFAPbI3 based devices with and without Cl-do**. Despite the gain in the output performance of the PCSs, the devices with CsFAPbI3-xClx showed improved light soaking stability. The T80 (time required to reduce initial efficiency by 20%) for Cl-doped PSCs was 1280h, while for pure CsFAPbI3 based devices only 650h. Three different defect energy levels were determined for different device configurations. We found that Cl-do** suppressed the formation of the antisite defects (IPb, IFA) and iodine interstitials (Ii). The changes in the defect's energy levels after continuous light soaking stress were analyzed and discussed. The present work provides new insights for the defect behavior of PSCs under continuous external stress, revealing the physical-chemical impact of the Cl-additive strategy.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Large-scale Ferrofluid Simulations on Graphics Processing Units
Authors:
A. Yu. Polyakov,
T. V. Lyutyy,
S. Denisov,
V. V. Reva,
P. Hanggi
Abstract:
We present an approach to molecular-dynamics simulations of ferrofluids on graphics processing units (GPUs). Our numerical scheme is based on a GPU-oriented modification of the Barnes-Hut (BH) algorithm designed to increase the parallelism of computations. For an ensemble consisting of one million of ferromagnetic particles, the performance of the proposed algorithm on a Tesla M2050 GPU demonstrat…
▽ More
We present an approach to molecular-dynamics simulations of ferrofluids on graphics processing units (GPUs). Our numerical scheme is based on a GPU-oriented modification of the Barnes-Hut (BH) algorithm designed to increase the parallelism of computations. For an ensemble consisting of one million of ferromagnetic particles, the performance of the proposed algorithm on a Tesla M2050 GPU demonstrated a computational-time speed-up of four order of magnitude compared to the performance of the sequential All-Pairs (AP) algorithm on a single-core CPU, and two order of magnitude compared to the performance of the optimized AP algorithm on the GPU. The accuracy of the scheme is corroborated by comparing the results of numerical simulations with theoretical predictions.
△ Less
Submitted 22 January, 2013; v1 submitted 12 December, 2012;
originally announced December 2012.
-
Resonant suppression of thermal stability of the nanoparticle magnetization by a rotating magnetic field
Authors:
S. I. Denisov,
A. Yu. Polyakov,
T. V. Lyutyy
Abstract:
We study the thermal stability of the periodic (P) and quasi-periodic (Q) precessional modes of the nanoparticle magnetic moment induced by a rotating magnetic field. An analytical method for determining the lifetime of the P mode in the case of high anisotropy barrier and small amplitudes of the rotating field is developed within the Fokker-Planck formalism. In general case, the thermal stability…
▽ More
We study the thermal stability of the periodic (P) and quasi-periodic (Q) precessional modes of the nanoparticle magnetic moment induced by a rotating magnetic field. An analytical method for determining the lifetime of the P mode in the case of high anisotropy barrier and small amplitudes of the rotating field is developed within the Fokker-Planck formalism. In general case, the thermal stability of both P and Q modes is investigated by numerical simulation of the stochastic Landau-Lifshitz equation. We show analytically and numerically that the lifetime is a nonmonotonic function of the rotating field frequency which, depending on the direction of field rotation, has either a pronounced maximum or a deep minimum near the Larmor frequency.
△ Less
Submitted 10 November, 2011; v1 submitted 17 August, 2011;
originally announced August 2011.
-
Multi-photon resonances in pure multiple-pulse NQR
Authors:
G. B. Furman,
G. E Kibrik,
A. Yu. Polyakov
Abstract:
We have observed multi-photon resonances in a system with a spin 3/2 irradiated simultaneously by a multiple pulse radiofrequency sequence and a low frequency field swept in the range 0-80 kHz. The used excitation scheme allowed us to measure the effective field of the radiofrequency sequence. A peculiarity of this scheme is that the intensity of the resonance lines decreases slowly with the mod…
▽ More
We have observed multi-photon resonances in a system with a spin 3/2 irradiated simultaneously by a multiple pulse radiofrequency sequence and a low frequency field swept in the range 0-80 kHz. The used excitation scheme allowed us to measure the effective field of the radiofrequency sequence. A peculiarity of this scheme is that the intensity of the resonance lines decreases slowly with the mode number. The theoretical description of the effect is presented using both the rotating frame approximation and the Floquet theory. Both approaches give indentical results at the calculation of the resonance frequencies, transition probabilities and shifts of resonance frequency. The calculated magnetization vs. the frequency of the low-frequency field agrees well with the obtained experimental data. The multi-frequency spectra give a way for studying slow atomic motion in solids.
△ Less
Submitted 5 December, 2004;
originally announced December 2004.