-
Equilibrium behaviour of two cavity-confined polymers: Effects of polymer width and system asymmetries
Authors:
Desiree A. Rehel,
James M. Polson
Abstract:
Experiments using nanofluidic devices have proven effective in characterizing the physical properties of polymers confined to small cavities. Two recent studies using such methods examined the organization and dynamics of two DNA molecules in box-like cavities with strong confinement in one direction and with square and elliptical cross sections in the lateral plane. Motivated by these experiments…
▽ More
Experiments using nanofluidic devices have proven effective in characterizing the physical properties of polymers confined to small cavities. Two recent studies using such methods examined the organization and dynamics of two DNA molecules in box-like cavities with strong confinement in one direction and with square and elliptical cross sections in the lateral plane. Motivated by these experiments, we employ Monte Carlo and Brownian dynamics simulations to study the physical behaviour of two polymers confined to small cavities with shapes comparable to those used in the experiments. We quantify the effects of varying the following polymer properties and confinement dimensions on the organization and dynamics of the polymers: the polymer width, the polymer contour length ratio, the cavity cross-sectional area, and the degree of cavity elongation for cavities with rectangular and elliptical cross sections. We find that the tendency for polymers to segregate is enhanced by increasing polymer width. For sufficiently small cavities, increasing cavity elongation promotes segregation and localization of identical polymers to opposite sides of the cavity along its long axis. A free-energy barrier controls the rate of polymers swap** positions, and the observed dynamics are roughly in accord with predictions of a simple theoretical model. Increasing the contour length difference between polymers significantly affects their organization in the cavity. In the case of a large linear polymer co-trapped with a small ring polymer in an elliptical cavity, the small polymer tends to lie near the lateral confining walls, and especially at the cavity poles for highly elongated ellipses.
△ Less
Submitted 28 December, 2022;
originally announced December 2022.
-
Entropic force of cone-tethered polymers interacting with a planar surface
Authors:
James M. Polson,
Roland G. MacLennan
Abstract:
Computer simulations are used to characterize the entropic force of one or more polymers tethered to the tip of a hard conical object that interact with a nearby hard flat surface. Pruned-enriched-Rosenbluth-method (PERM) Monte Carlo simulations are used to calculate the variation of the conformational free energy, $F$, of a hard-sphere polymer with respect to cone-tip-to-surface distance, $h$, fr…
▽ More
Computer simulations are used to characterize the entropic force of one or more polymers tethered to the tip of a hard conical object that interact with a nearby hard flat surface. Pruned-enriched-Rosenbluth-method (PERM) Monte Carlo simulations are used to calculate the variation of the conformational free energy, $F$, of a hard-sphere polymer with respect to cone-tip-to-surface distance, $h$, from which the variation of the entropic force, $f\equiv |dF/dh|$, with $h$ is determined. We consider the following cases: (1) a single freely-jointed tethered chain, (2) a single semiflexible tethered chain, and (3) several freely-jointed chains of equal length each tethered to the cone tip. The simulation results are used to test the validity of a prediction by Maghrebi et al. (EPL, 96, 66002(2011); Phys. Rev. E 86, 061801 (2012)) that $f\propto (γ_\infty-γ_0) h^{-1}$, where $γ_0$ and $γ_\infty$ are universal scaling exponents for the partition function of the tethered polymer for $h=0$ and $h=\infty$, respectively. The measured functions $f(h)$ are generally consistent with the predictions, with small quantitative discrepancies arising from the approximations employed in the theory. In the case of multiple tethered polymers, the entropic force per polymer is roughly constant, which is qualitatively inconsistent with the predictions.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Flatness and Intrinsic Curvature of Linked-Ring Membranes
Authors:
James M. Polson,
Edgar J. Garcia,
Alexander R. Klotz
Abstract:
Recent experiments have elucidated the physical properties of kinetoplasts, which are chain-mail-like structures found in the mitochondria of trypanosome parasites formed from catenated DNA rings. Inspired by these studies, we use Monte Carlo simulations to examine the behavior of two-dimensional networks ("membranes") of linked rings. For simplicity, we consider only identical rings that are circ…
▽ More
Recent experiments have elucidated the physical properties of kinetoplasts, which are chain-mail-like structures found in the mitochondria of trypanosome parasites formed from catenated DNA rings. Inspired by these studies, we use Monte Carlo simulations to examine the behavior of two-dimensional networks ("membranes") of linked rings. For simplicity, we consider only identical rings that are circular and rigid and that form networks with a regular linking structure. We find that the scaling of the eigenvalues of the shape tensor with membrane size are consistent with the behavior of the flat phase observed in self-avoiding covalent membranes. Increasing ring thickness tends to swell the membrane. Remarkably, unlike covalent membranes, the linked-ring membranes tend to form concave structures with an intrinsic curvature of entropic origin associated with local excluded-volume interactions. The degree of concavity increases with increasing ring thickness and is also affected by the type of linking network. The relevance of the properties of linked-ring model membranes to those observed in kinetoplasts is discussed.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Equilibrium organization, conformation, and dynamics of two polymers under box-like confinement
Authors:
James M. Polson,
Desiree A. Rehel
Abstract:
Motivated by recent nanofluidics experiments, we use Brownian dynamics and Monte Carlo simulations to study the conformation, organization and dynamics of two polymer chains confined to a single box-like cavity. The polymers are modeled as flexible hard-sphere chains, and the box has a square cross-section of side length $L$ and a height that is small enough to compress the polymers in that dimens…
▽ More
Motivated by recent nanofluidics experiments, we use Brownian dynamics and Monte Carlo simulations to study the conformation, organization and dynamics of two polymer chains confined to a single box-like cavity. The polymers are modeled as flexible hard-sphere chains, and the box has a square cross-section of side length $L$ and a height that is small enough to compress the polymers in that dimension. For sufficiently large $L$, the system behaviour approaches that of an isolated polymer in a slit. However, the combined effects of crowding and confinement on the polymer organization, conformation and equilibrium dynamics become significant when $L/R_{{\rm g},xy}^*\lesssim 5$, where $R_{{\rm g},xy}^*$ is the transverse radius of gyration for a slit geometry. In this regime, the centre-of-mass probability distribution in the transverse plane exhibits a depletion zone near the centre of the cavity (except at very small $L$) and a 4-fold symmetry with quasi-discrete positions. Reduction in polymer size with decreasing $L$ arises principally from confinement rather than inter-polymer crowding. By contrast, polymer diffusion and internal motion are strongly affected by inter-polymer crowding. The two polymers tend to occupy opposite positions relative to the box centre, about which they diffuse relatively freely. Qualitatively, this static and dynamical behaviour differs significantly from that previously observed for confinement of two polymers to a narrow channel. The simulation results for a suitably chosen box width are qualitatively consistent with results from a recent experimental study of two $λ$-DNA chains confined to a nanofluidic cavity.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Polymer translocation into cavities: Effects of confinement geometry, crowding and bending rigidity on the free energy
Authors:
James M. Polson,
David R. Heckbert
Abstract:
Monte Carlo simulations are used to study the translocation of a polymer into a cavity. Modeling the polymer as a hard-sphere chain with a length up to N=601 monomers, we use a multiple-histogram method to measure the variation of the conformational free energy of the polymer with respect to the number of translocated monomers. The resulting free-energy functions are then used to obtain the confin…
▽ More
Monte Carlo simulations are used to study the translocation of a polymer into a cavity. Modeling the polymer as a hard-sphere chain with a length up to N=601 monomers, we use a multiple-histogram method to measure the variation of the conformational free energy of the polymer with respect to the number of translocated monomers. The resulting free-energy functions are then used to obtain the confinement free energy for the translocated portion of the polymer. We characterize the confinement free energy for a flexible polymer in cavities with constant cross-sectional area A for various cavity shapes (cylindrical, rectangular and triangular) as well as for tapered cavities with pyramidal and conical shape. The scaling of the free energy with cavity volume and translocated polymer subchain length is generally consistent with predictions from simple scaling arguments, with small deviations in the scaling exponents likely due to finite-size effects. The confinement free energy depends strongly on cavity shape anisometry and is a minimum for an isometric cavity shape with a length/width ratio of unity. For translocation into infinitely long cones, the scaling of the free energy with taper angle is consistent with a theoretical prediction employing the blob model. We also examine the effects of polymer bending rigidity on the translocation free energy for cylindrical cavities. For isometric cavities, the observed scaling behaviour is in partial agreement with theoretical predictions. In addition, translocation into highly anisometric cylindrical cavities leads to a multi-stage folding process for stiff polymers. Finally, we examine the effects of crowding agents inside the cavity. We find that the confinement free energy increases with crowder density. At constant packing fraction the magnitude of this effect lessens with increasing crowder size for crowder/monomer size ratio$\geq$ 1.
△ Less
Submitted 24 March, 2021;
originally announced March 2021.
-
Free energy and segregation dynamics of two channel-confined polymers of different length
Authors:
James M. Polson,
Qinxin Zhu
Abstract:
Polymers confined to a narrow channel are subject to strong entropic forces that tend to drive the molecules apart. In this study, we use Monte Carlo computer simulations to study the segregation behavior of two flexible hard-sphere polymers under confinement in a cylindrical channel. We focus on the effects of using polymers of different lengths. We measure the variation of the conformational fre…
▽ More
Polymers confined to a narrow channel are subject to strong entropic forces that tend to drive the molecules apart. In this study, we use Monte Carlo computer simulations to study the segregation behavior of two flexible hard-sphere polymers under confinement in a cylindrical channel. We focus on the effects of using polymers of different lengths. We measure the variation of the conformational free energy, $F$, with the center-of-mass separation distance, $λ$. The simulations reveal four different separation regimes, characterized by different scaling properties of the free energy with respect to the polymer lengths and the channel diameter, $D$. We propose a regime map in which the state of the system is determined by the values of the quantities $N_2/N_1$ and $λ/(N_1+N_2)D^{-β}$, where $N_1$ and $N_2$ are the polymer lengths, and where $β\approx 0.64$. The observed scaling behavior of $F(λ)$ in each regime is in reasonable agreement with predictions using a simple theoretical model. In addition, we use MC dynamics simulations to study the segregation dynamics of initially overlap** polymers by measurement of the incremental mean first-passage time with respect to $λ$. For systems characterized by a wide range of $λ$ in which a short polymer is nested within a longer one, the segregation dynamics are close to that expected for two noninteracting 1D random walkers undergoing unbiased diffusion. When the free energy gradient is large segregation is rapid and characterized by out-of-equilibrium effects.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Free Energy of a Knotted Polymer Confined to Narrow Cylindrical and Conical Channels
Authors:
James M. Polson,
Cameron G. Hastie
Abstract:
Monte Carlo simulations are used to study the conformational behavior of a semiflexible polymer confined to cylindrical and conical channels. The channels are sufficiently narrow that the conditions for the Odijk regime are marginally satisfied. For cylindrical confinement, we examine polymers with a single knot of topology $3_1$, $4_1$, or $5_1$, as well as unknotted polymers that are capable of…
▽ More
Monte Carlo simulations are used to study the conformational behavior of a semiflexible polymer confined to cylindrical and conical channels. The channels are sufficiently narrow that the conditions for the Odijk regime are marginally satisfied. For cylindrical confinement, we examine polymers with a single knot of topology $3_1$, $4_1$, or $5_1$, as well as unknotted polymers that are capable of forming S-loops. We measure the variation of the free energy $F$ with the end-to-end polymer extension length $X$ and examine the effect of varying the polymer topology, persistence length $P$ and cylinder diameter $D$ on the free energy functions. Similarly, we characterize the behavior of the knot span along the channel. We find that increasing the knot complexity increases the typical size of the knot. In the regime of low $X$, where the knot/S-loop size is large, the conformational behavior is independent of polymer topology. In addition, the scaling properties of the free energy and knot span are in agreement with predictions from a theoretical model constructed using known properties of interacting polymers in the Odijk regime. We also examine the variation of $F$ with position of a knot in conical channels for various values of the cone angle $α$. The free energy decreases as the knot moves in a direction where the cone widens, and it also decreases with increasing $α$ and with increasing knot complexity. The behavior is in agreement with predictions from a theoretical model in which the dominant contribution to the change in $F$ is the change in the size of the hairpins as the knot moves to the wider region of the channel.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Extremely well isolated 2D spin-$1/2$ antiferromagnetic Heisenberg layers with small exchange coupling in the molecular-based magnet CuPOF
Authors:
D. Opherden,
N. Nizar,
K. Richardson,
J. C. Monroe,
M. M. Turnbull,
M. Polson,
S. Vela,
W. J. A. Blackmore,
P. A. Goddard,
J. Singleton,
E. S. Choi,
F. Xiao,
R. C. Williams,
T. Lancaster,
F. L. Pratt,
S. J. Blundell,
Y. Skourski,
M. Uhlarz,
A. N. Ponomaryov,
S. A. Zvyagin,
J. Wosnitza,
M. Baenitz,
I. Heinmaa,
R. Stern,
H. Kühne
, et al. (1 additional authors not shown)
Abstract:
We report on a comprehensive characterization of the newly synthesized Cu$^{2+}$-based molecular magnet [Cu(pz)$_2$(2-HOpy)$_2$](PF$_6$)$_2$ (CuPOF), where pz = C$_4$H$_4$N$_2$ and 2-HOpy = C$_5$H$_4$NHO. From a comparison of theoretical modeling to results of bulk magnetometry, specific heat, $μ^+$SR, ESR, and NMR spectroscopy, this material is determined as an excellent realization of the 2D squ…
▽ More
We report on a comprehensive characterization of the newly synthesized Cu$^{2+}$-based molecular magnet [Cu(pz)$_2$(2-HOpy)$_2$](PF$_6$)$_2$ (CuPOF), where pz = C$_4$H$_4$N$_2$ and 2-HOpy = C$_5$H$_4$NHO. From a comparison of theoretical modeling to results of bulk magnetometry, specific heat, $μ^+$SR, ESR, and NMR spectroscopy, this material is determined as an excellent realization of the 2D square-lattice $S=1/2$ antiferromagnetic Heisenberg model with a moderate intraplane nearest-neighbor exchange coupling of $J/k_\mathrm{B} = 6.80(5)$ K, and an extremely small interlayer interaction of about 1 mK. At zero field, the bulk magnetometry reveals a temperature-driven crossover of spin correlations from isotropic to $XY$ type, caused by the presence of a weak intrinsic easy-plane anisotropy. A transition to long-range order, driven by the low-temperature $XY$ anisotropy under the influence of the interlayer coupling, occurs at $T_\mathrm{N} = 1.38(2)$ K, as revealed by $μ^+$SR. In applied magnetic fields, our $^1$H-NMR data reveal a strong increase of the magnetic anisotropy, manifested by a pronounced enhancement of the transition temperature to commensurate long-range order at $T_\mathrm{N} =2.8$ K and 7 T.
△ Less
Submitted 1 September, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Free-energy cost of localizing a single monomer of a confined polymer
Authors:
James M. Polson,
Zakary R. N. McLure
Abstract:
We describe a simple Monte Carlo simulation method to calculate the free-energy cost of localizing a single monomer of a polymer confined to a cavity. The localization position is chosen to be on the inside surface of the confining cavity. The method is applied to a freely-jointed hard-sphere polymer chain confined to cavities of spherical and cubic geometries. In the latter case we consider local…
▽ More
We describe a simple Monte Carlo simulation method to calculate the free-energy cost of localizing a single monomer of a polymer confined to a cavity. The localization position is chosen to be on the inside surface of the confining cavity. The method is applied to a freely-jointed hard-sphere polymer chain confined to cavities of spherical and cubic geometries. In the latter case we consider localization at a corner and at the center of a face of the confining cube. We consider cases of end-monomer localization both with and without tethering of the other end monomer to a point on the surface. We also examine localization of monomers at arbitrary position along the contour of the polymer. We characterize the dependence of the free energy on the cavity size and shape, the localization position, and the polymer length. The quantitative trends can be understood using standard scaling arguments and use of a simple theoretical model. The results are relevant to those theories of polymer translocation that focus on the importance of the free-energy barrier as the translocation process requires an initial localization of a monomer to the position of a nanopore.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
Strategic Bayesian Asset Allocation
Authors:
Vadim Sokolov,
Michael Polson
Abstract:
Strategic asset allocation requires an investor to select stocks from a given basket of assets. The perspective of our investor is to maximize risk-adjusted alpha returns relative to a benchmark index. Historical returns are used to provide inputs into an optimization algorithm. Our approach uses Bayesian regularization to not only provide stock selection but also optimal sequential portfolio weig…
▽ More
Strategic asset allocation requires an investor to select stocks from a given basket of assets. The perspective of our investor is to maximize risk-adjusted alpha returns relative to a benchmark index. Historical returns are used to provide inputs into an optimization algorithm. Our approach uses Bayesian regularization to not only provide stock selection but also optimal sequential portfolio weights. By incorporating investor preferences with a number of different regularization penalties we extend the approaches of Black (1992) and Puelz (2015). We tailor standard sparse MCMC algorithms to calculate portfolio weights and perform selection. We illustrate our methodology on stock selection from the SP100 stock index and from the top fifty holdings of two hedge funds Renaissance Technologies and Viking Global. Finally, we conclude with directions for future research.
△ Less
Submitted 1 December, 2019; v1 submitted 20 May, 2019;
originally announced May 2019.
-
Deep Learning for Energy Markets
Authors:
Michael Polson,
Vadim Sokolov
Abstract:
Deep Learning is applied to energy markets to predict extreme loads observed in energy grids. Forecasting energy loads and prices is challenging due to sharp peaks and troughs that arise due to supply and demand fluctuations from intraday system constraints. We propose deep spatio-temporal models and extreme value theory (EVT) to capture theses effects and in particular the tail behavior of load s…
▽ More
Deep Learning is applied to energy markets to predict extreme loads observed in energy grids. Forecasting energy loads and prices is challenging due to sharp peaks and troughs that arise due to supply and demand fluctuations from intraday system constraints. We propose deep spatio-temporal models and extreme value theory (EVT) to capture theses effects and in particular the tail behavior of load spikes. Deep LSTM architectures with ReLU and $\tanh$ activation functions can model trends and temporal dependencies while EVT captures highly volatile load spikes above a pre-specified threshold. To illustrate our methodology, we use hourly price and demand data from 4719 nodes of the PJM interconnection, and we construct a deep predictor. We show that DL-EVT outperforms traditional Fourier time series methods, both in-and out-of-sample, by capturing the observed nonlinearities in prices. Finally, we conclude with directions for future research.
△ Less
Submitted 10 April, 2019; v1 submitted 16 August, 2018;
originally announced August 2018.
-
Free energy of a folded semiflexible polymer confined to a nanochannel of various geometries
Authors:
James M. Polson
Abstract:
Monte Carlo simulations are used to study the conformational properties of a folded semiflexible polymer confined to a long channel. We measure the variation in the conformational free energy with respect to the end-to-end distance of the polymer, and from these functions we extract the free energy of the hairpin fold, as well as the entropic force arising from interactions between the portions of…
▽ More
Monte Carlo simulations are used to study the conformational properties of a folded semiflexible polymer confined to a long channel. We measure the variation in the conformational free energy with respect to the end-to-end distance of the polymer, and from these functions we extract the free energy of the hairpin fold, as well as the entropic force arising from interactions between the portions of the polymer that overlap along the channel. We consider the scaling of the free energies with respect to varying the persistence length of the polymer, as well as the channel dimensions for confinement in cylindrical, rectangular and triangular channels. We focus on polymer behaviour in both the classic Odijk and back folded Odijk regimes. We find the scaling of the entropic force to be close to that predicted from a scaling argument that treats interactions between deflection segments at the second virial level. In addition, the measured hairpin fold free energy is consistent with that obtained directly from a recent theoretical calculation for cylindrical channels. It is also consistent with values determined from measurements of the global persistence length of a polymer in the backfolded Odijk regime in recent simulation studies.
△ Less
Submitted 31 May, 2018;
originally announced May 2018.
-
Segregation of polymers under cylindrical confinement: Effects of polymer topology and crowding
Authors:
James M. Polson,
Deanna R. -M. Kerry
Abstract:
Monte Carlo computer simulations are used to study the segregation behaviour of two polymers under cylindrical confinement. Using a multiple-histogram method, the conformational free energy, F, of the polymers was measured as a function of the centre-of-mass separation distance, λ. We examined the scaling of the free energy functions with the polymer length, the length and diameter of the confinin…
▽ More
Monte Carlo computer simulations are used to study the segregation behaviour of two polymers under cylindrical confinement. Using a multiple-histogram method, the conformational free energy, F, of the polymers was measured as a function of the centre-of-mass separation distance, λ. We examined the scaling of the free energy functions with the polymer length, the length and diameter of the confining cylinder, the polymer topology (i.e. linear vs ring polymers), and the packing fraction and size of mobile crowding agents. In the absence of crowders, the observed scaling of F(λ) is similar to that predicted using a simple model employing the de~Gennes blob model and the approximation that the free energy of overlap** chains in a tube is equal to that of two isolated chains each in a tube of half the cross-sectional area. Simulations were used to test the latter approximation and reveal that it yields poor quantitative predictions. This, along with generic finite-size effects, likely gives rise to the discrepancies between the predicted and measured values of scaling exponents for F(λ). For segregation in the presence of crowding agents, the free energy barrier generally decreases with increasing crowder packing fraction, thus reducing the entropic forces driving segregation. However, for fixed packing fraction, the barrier increases as the crowder/monomer size ratio decreases.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Free energy of a folded polymer under cylindrical confinement
Authors:
James M. Polson,
Aidan F. Tremblett,
Zakary R. N. McLure
Abstract:
Monte Carlo computer simulations are used to study the conformational free energy of a folded polymer confined to a long cylindrical tube. The polymer is modeled as a hard-sphere chain. Its conformational free energy $F$ is measured as a function of $λ$, the end-to-end distance of the polymer. In the case of a flexible linear polymer, $F(λ)$ is a linear function in the folded regime with a gradien…
▽ More
Monte Carlo computer simulations are used to study the conformational free energy of a folded polymer confined to a long cylindrical tube. The polymer is modeled as a hard-sphere chain. Its conformational free energy $F$ is measured as a function of $λ$, the end-to-end distance of the polymer. In the case of a flexible linear polymer, $F(λ)$ is a linear function in the folded regime with a gradient that scales as $f\equiv |dF/dλ| \sim N^0 D^{-1.20\pm 0.01}$ for a tube of diameter $D$ and a polymer of length $N$. This is close to the prediction $f \sim N^0 D^{-1}$ obtained from simple scaling arguments. The discrepancy is due in part to finite-size effects associated with the de-Gennes blob model. A similar discrepancy was observed for the folding of a single arm of a three-arm star polymer. We also examine backfolding of a semiflexible polymer of persistence length $P$ in the classic Odijk regime. In the overlap regime, the derivative scales $f \sim N^0 D^{-1.72\pm 0.02} P^{-0.35\pm 0.01}$, which is close to the prediction $f \sim N^0 D^{-5/3} P^{-1/3}$ obtained from a scaling argument that treats interactions between deflection segments at the second virial level. In addition, the measured free energy cost of forming a hairpin turn is quantitatively consistent with a recent theoretical calculation. Finally, we examine the scaling of $F(λ)$ for a confined semiflexible chain in the presence of an S-loop composed of two hairpins. While the predicted scaling of the free energy gradient is the same as that for a single hairpin, we observe a scaling of $f \sim D^{-1.91\pm 0.03} P^{-0.36\pm 0.01}$. Thus, the quantitative discrepancy between this measurement and the predicted scaling is somewhat greater for S-loops than for single hairpins.
△ Less
Submitted 17 November, 2017; v1 submitted 30 September, 2017;
originally announced October 2017.
-
Polymer translocation into and out of an ellipsoidal cavity
Authors:
James M. Polson
Abstract:
Monte Carlo simulations are used to study the translocation of a polymer into and out of a ellipsoidal cavity through a narrow pore. We measure the polymer free energy F as a function of a translocation coordinate, s, defined to be the number of bonds that have entered the cavity. To study polymer insertion, we consider the case of a driving force acting on monomers inside the pore, as well as mon…
▽ More
Monte Carlo simulations are used to study the translocation of a polymer into and out of a ellipsoidal cavity through a narrow pore. We measure the polymer free energy F as a function of a translocation coordinate, s, defined to be the number of bonds that have entered the cavity. To study polymer insertion, we consider the case of a driving force acting on monomers inside the pore, as well as monomer attraction to the cavity wall. We examine the changes to F(s) upon variation in the shape anisometry and volume of the cavity, the polymer length, and the strength of the interactions driving the insertion. For athermal systems, the free energy functions are analyzed using a scaling approach, where we treat the confined portion of the polymer to be in the semi-dilute regime. The free energy functions are used with the Fokker-Planck equation to measure mean translocation times, as well as translocation time distributions. We find that both polymer ejection and insertion is faster for ellipsoidal cavities than for spherical cavities. The results are in qualitative agreement with those of a Langevin dynamics study in the case of ejection but not for insertion. The discrepancy is likely due to out-of-equilibrium conformational behaviour that is not accounted for in the FP approach
△ Less
Submitted 19 February, 2015;
originally announced February 2015.
-
Polymer segregation under confinement: Free energy calculations and segregation dynamics simulations
Authors:
James M. Polson,
Logan G. Montgomery
Abstract:
Monte Carlo simulations are used to study the behavior of two polymers under confinement in a cylindrical tube. Each polymer is modeled as a chain of hard spheres. We measure the free energy of the system, F, as a function of the distance between the centers of mass of the polymers, lambda, and examine the effects on the free energy functions of varying the channel diameter D and length L, as well…
▽ More
Monte Carlo simulations are used to study the behavior of two polymers under confinement in a cylindrical tube. Each polymer is modeled as a chain of hard spheres. We measure the free energy of the system, F, as a function of the distance between the centers of mass of the polymers, lambda, and examine the effects on the free energy functions of varying the channel diameter D and length L, as well as the polymer length N and bending rigidity, kappa. For infinitely long cylinders, F is a maximum at lambda=0, and decreases with lambda until the polymers are no longer in contact. For flexible chains, the polymers overlap along the cylinder for low lambda, while above some critical value of lambda they are longitudinally compressed and non-overlap** while still in contact. We find that the free energy barrier height, scales as Delta F/k_BT~ND^{-1.93+/-0.01}. In addition, the overlap free energy scales as F/k_BT=Nf(lambda/N;D), where f is a function parameterized by D. For channels of finite L, the free energy barrier height increases with increasing confinement aspect ratio L/D at fixed volume fraction phi, and it decreases with increasing phi at fixed L/D. Increasing the polymer bending rigidity kappa monotonically reduces the overlap free energy. For strongly confined systems, F varies linearly with lambda with a slope that scales as F'(lambda)~-k_BT D^{-beta} P^{-alpha}, where beta approx 2 and alpha approx 0.37 for N=200 chains. These exponent values deviate slightly from those predicted using a simple model, possibly due to insufficiently satisfying the conditions defining the Odijk regime. Finally, we use Monte Carlo dynamics simulations to examine polymer segregation dynamics for fully flexible chains and observe segregation rates that decrease with decreasing entropic force magnitude. The polymers are not conformationally relaxed at later times during segregation.
△ Less
Submitted 9 October, 2014; v1 submitted 20 August, 2014;
originally announced August 2014.
-
Evaluating the Applicability of the Fokker-Planck Equation in Polymer Translocation: A Brownian Dynamics Study
Authors:
James M. Polson,
Taylor Dunn
Abstract:
Brownian dynamics (BD) simulations are used to study the translocation dynamics of a coarse-grained polymer through a cylindrical nanopore. We consider the case of short polymers, with a polymer length, N, in the range N=21-61. The rate of translocation is controlled by a tunable friction coefficient, gamma_{0p}, for monomers inside the nanopore. In the case of unforced translocation, the mean tra…
▽ More
Brownian dynamics (BD) simulations are used to study the translocation dynamics of a coarse-grained polymer through a cylindrical nanopore. We consider the case of short polymers, with a polymer length, N, in the range N=21-61. The rate of translocation is controlled by a tunable friction coefficient, gamma_{0p}, for monomers inside the nanopore. In the case of unforced translocation, the mean translocation time scales with polymer length N as <tau_1>~ (N-N_p)^alpha, where N_p is the average number of monomers in the nanopore. The exponent approaches the value alpha=2 when the pore friction is sufficiently high, in accord with the prediction for the case of the quasi-static regime where pore friction dominates. In the case of forced translocation, the polymer chain is stretched and compressed on the cis and trans sides, respectively, for low gamma_{0p}. However, the chain approaches conformational quasi-equilibrium for sufficiently large gamma_{0p}. In this limit the observed scaling of <tau_1> with driving force and chain length supports the FP prediction that <tau> is proportional to N/f_d for sufficiently strong driving force. Monte Carlo simulations are used to calculate translocation free energy functions for the system. The free energies are used with the Fokker-Planck equation to calculate translocation time distributions. At sufficiently high gamma_{0p}, the predicted distributions are in excellent agreement with those calculated from the BD simulations. Thus, the FP equation provides a valid description of translocation dynamics for sufficiently high pore friction for the range of polymer lengths considered here. Increasing N will require a corresponding increase in pore friction to maintain the validity of the FP approach. Outside the regime of low N and high pore friction, the polymer is out of equilibrium, and the FP approach is not valid.
△ Less
Submitted 28 March, 2014; v1 submitted 31 January, 2014;
originally announced January 2014.
-
Polymer Translocation Dynamics in the Quasi-Static Limit
Authors:
James M. Polson,
Anthony C. M. McCaffrey
Abstract:
Monte Carlo (MC) simulations are used to study the dynamics of polymer translocation through a nanopore in the limit where the translocation rate is sufficiently slow that the polymer maintains a state of conformational quasi-equilibrium. The system is modeled as a flexible hard-sphere chain that translocates through a cylindrical hole in a hard flat wall. In some calculations, the nanopore is con…
▽ More
Monte Carlo (MC) simulations are used to study the dynamics of polymer translocation through a nanopore in the limit where the translocation rate is sufficiently slow that the polymer maintains a state of conformational quasi-equilibrium. The system is modeled as a flexible hard-sphere chain that translocates through a cylindrical hole in a hard flat wall. In some calculations, the nanopore is connected at one end to a spherical cavity. Translocation times are measured directly using MC dynamics simulations. For sufficiently narrow pores, translocation is sufficiently slow that the mean translocation time scales with polymer length N according to <τ> \propto (N-N_p)^2, where N_p is the average number of monomers in the nanopore; this scaling is an indication of a quasi-static regime in which polymer-nanopore friction dominates. We use a multiple-histogram method to calculate the variation of the free energy with Q, a coordinate used to quantify the degree of translocation. The free energy functions are used with the Fokker-Planck formalism to calculate translocation time distributions in the quasi-static regime. These calculations also require a friction coefficient, characterized by a quantity N_{eff}, the effective number of monomers whose dynamics are affected by the confinement of the nanopore. This was determined by fixing the mean of the theoretical distribution to that of the distribution obtained from MC dynamics simulations. The theoretical distributions are in excellent quantitative agreement with the distributions obtained directly by the MC dynamics simulations for physically meaningful values of N_{eff}. The free energy functions for narrow-pore systems exhibit oscillations with an amplitude that is sensitive to the nanopore length. Generally, larger oscillation amplitudes correspond to longer translocation times.
△ Less
Submitted 16 March, 2013; v1 submitted 9 January, 2013;
originally announced January 2013.
-
Integration Schemes for Dissipative Particle Dynamics Simulations: From Softly Interacting Systems Towards Hybrid Models
Authors:
Ilpo Vattulainen,
Mikko Karttunen,
Gerhard Besold,
J. M. Polson
Abstract:
We examine the performance of various commonly used integration schemes in dissipative particle dynamics simulations. We consider this issue using three different model systems, which characterize a variety of different conditions often studied in simulations. Specifically we clarify the performance of integration schemes in hybrid models, which combine microscopic and meso-scale descriptions of…
▽ More
We examine the performance of various commonly used integration schemes in dissipative particle dynamics simulations. We consider this issue using three different model systems, which characterize a variety of different conditions often studied in simulations. Specifically we clarify the performance of integration schemes in hybrid models, which combine microscopic and meso-scale descriptions of different particles using both soft and hard interactions. We find that in all three model systems many commonly used integrators may give rise to surprisingly pronounced artifacts in physical observables such as the radial distribution function, the compressibility, and the tracer diffusion coefficient. The artifacts are found to be strongest in systems, where interparticle interactions are soft and predominated by random and dissipative forces, while in systems governed by conservative interactions the artifacts are weaker. Our results suggest that the quality of any integration scheme employed is crucial in all cases where the role of random and dissipative forces is important, including hybrid models where the solvent is described in terms of soft potentials.
△ Less
Submitted 15 November, 2002;
originally announced November 2002.
-
Towards Better Integrators for Dissipative Particle Dynamics Simulations
Authors:
Gerhard Besold,
Ilpo Vattulainen,
Mikko Karttunen,
James M. Polson
Abstract:
Coarse-grained models that preserve hydrodynamics provide a natural approach to study collective properties of soft-matter systems. Here, we demonstrate that commonly used integration schemes in dissipative particle dynamics give rise to pronounced artifacts in physical quantities such as the compressibility and the diffusion coefficient. We assess the quality of these integration schemes, inclu…
▽ More
Coarse-grained models that preserve hydrodynamics provide a natural approach to study collective properties of soft-matter systems. Here, we demonstrate that commonly used integration schemes in dissipative particle dynamics give rise to pronounced artifacts in physical quantities such as the compressibility and the diffusion coefficient. We assess the quality of these integration schemes, including variants based on a recently suggested self-consistent approach, and examine their relative performance. Implications of integrator-induced effects are discussed.
△ Less
Submitted 16 October, 2000;
originally announced October 2000.
-
Finite-size corrections to the free energy of crystalline solids
Authors:
J. M. Polson,
E. Trizac,
S. Pronk,
D. Frenkel
Abstract:
We analyse the finite-size corrections to the free energy of crystals with a fixed center of mass. When we explicitly correct for the leading ($\ln N/N$) corrections, the remaining free energy is found to depend linearly on 1/N. Extrapolating to the thermodynamic limit ($N\to\infty$), we estimate the free energy of a defect free crystal of particles interacting through an $r^{-12}$-potential. We…
▽ More
We analyse the finite-size corrections to the free energy of crystals with a fixed center of mass. When we explicitly correct for the leading ($\ln N/N$) corrections, the remaining free energy is found to depend linearly on 1/N. Extrapolating to the thermodynamic limit ($N\to\infty$), we estimate the free energy of a defect free crystal of particles interacting through an $r^{-12}$-potential. We also estimate the free energy of perfect hard-sphere crystal near coexistence: at $ρσ^{3}$=1.0409, the excess free energy of a defect-free hard-sphere crystal is $5.91889(4)kT$ per particle. This, however, is not the free energy of an equilibrium hard-sphere crystal. The presence of an finite concentration of vacancies results in a reduction of the free energy that is some two orders of magnitude larger than the present error estimate.
△ Less
Submitted 10 September, 1999;
originally announced September 1999.
