-
Design guidelines for two-dimensional transition metal dichalcogenide alloys
Authors:
Andrea Silva,
Jiangming Cao,
Tomas Polcar,
Denis Kramer
Abstract:
Two-dimensional (2D) materials and Transition Metal Dichalcogenides (TMD) in particular are at the forefront of nanotechnology. To tailor properties for engineering applications, alloying strategies used for bulk metals in the last century need to be extended to this novel class of materials. Here we present a systematic analysis of the phase behaviour of substitutional 2D alloys in the TMD family…
▽ More
Two-dimensional (2D) materials and Transition Metal Dichalcogenides (TMD) in particular are at the forefront of nanotechnology. To tailor properties for engineering applications, alloying strategies used for bulk metals in the last century need to be extended to this novel class of materials. Here we present a systematic analysis of the phase behaviour of substitutional 2D alloys in the TMD family on both the metal and chalcogenide site. The phase behaviour is quantified in terms of a metastability metric and benchmarked against systematic computational screening of configurational energy landscapes. The resulting Pettifor maps can be used to identify broad trends across chemical spaces and as starting point for setting up rational search strategies in phase space, thus allowing for targeted computational analysis of properties on likely thermodynamically stable compounds. The results presented here also constitute a useful guideline for synthesis of binary metal 2D TMDs alloys via a range of synthesis techniques.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
Pettifor Maps of Complex Ternary Two-dimensional Transition Metal Sulphides
Authors:
Andrea Silva,
Jiangming Cao,
Tomas Polcar,
Denis Kramer
Abstract:
Alloying is an established strategy to tune the properties of bulk compounds for desired applications. With the advent of nanotechnology, the same strategy can be applied to 2D materials for technological applications, like single-layer transistors and solid lubricants. Here we present a systematic analysis of the phase behaviour of substitutional 2D alloys in the Transition Metal Disulphides (TMD…
▽ More
Alloying is an established strategy to tune the properties of bulk compounds for desired applications. With the advent of nanotechnology, the same strategy can be applied to 2D materials for technological applications, like single-layer transistors and solid lubricants. Here we present a systematic analysis of the phase behaviour of substitutional 2D alloys in the Transition Metal Disulphides (TMD) family. The phase behaviour is quantified in terms of a metastability metric and benchmarked against many-body expansion of the energy landscape. We show how the metastability metric can be directly used as starting point for setting up rational search strategies in phase space, thus allowing for targeted further computational prediction and analysis of properties. The results presented here also constitute a useful guideline for synthesis of TMDs binary alloys via a range of synthesis techniques.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Multi-scale model predicting friction of crystalline materials
Authors:
Paola C. Torche,
Andrea Silva,
Denis Kramer,
Tomas Polcar,
Ondrej Hovorka
Abstract:
We present a multi-scale computational framework suitable for designing solid lubricant interfaces fully in silico. The approach is based on stochastic thermodynamics founded on the classical thermally activated two-dimensional Prandtl-Tomlinson model, linked with First Principles methods to accurately capture the properties of real materials. It allows investigating the energy dissipation due to…
▽ More
We present a multi-scale computational framework suitable for designing solid lubricant interfaces fully in silico. The approach is based on stochastic thermodynamics founded on the classical thermally activated two-dimensional Prandtl-Tomlinson model, linked with First Principles methods to accurately capture the properties of real materials. It allows investigating the energy dissipation due to friction in materials as it arises directly from their electronic structure, and naturally accessing the time-scale range of a typical friction force microscopy. This opens new possibilities for designing a broad class of material surfaces with atomically tailored properties. We apply the multi-scale framework to a class of two-dimensional layered materials and reveal a delicate interplay between the topology of the energy landscape and dissipation that known static approaches based solely on the energy barriers fail to capture.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Phase behaviour of (Ti:Mo)S$_2$ binary alloys arising from electron-lattice coupling
Authors:
Andrea Silva,
Tomas Polcar,
Denis Kramer
Abstract:
While 2D materials attract considerable interests for their exotic electronic and mechanical properties, their phase behaviour is still largely not understood. This work focuses on (Mo:Ti)S$_2$ binary alloys which have captured the interest of the tribology community for their good performance in solid lubrication applications and whose chemistry and crystallography is still debated. Using electro…
▽ More
While 2D materials attract considerable interests for their exotic electronic and mechanical properties, their phase behaviour is still largely not understood. This work focuses on (Mo:Ti)S$_2$ binary alloys which have captured the interest of the tribology community for their good performance in solid lubrication applications and whose chemistry and crystallography is still debated. Using electronic structures calculations and statistical mechanics we predict a phase-separating behaviour for the system and trace its origin to the energetics of the $d$-band manifold due to crystal field splitting. Our predicted solubility limits as a function of temperature are in accordance with experimental data and demonstrate the utility of this protocol in understanding and designing TMD alloys.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
Exploring the stability of twisted van der Waals heterostructures
Authors:
Andrea Silva,
Victor E. P. Claerbout,
Tomas Polcar,
Denis Kramer,
Paolo Nicolini
Abstract:
Recent research showed that the rotational degree of freedom in stacking 2D materials yields great changes in the electronic properties. Here we focus on an often overlooked question: are twisted geometries stable and what defines their rotational energy landscape? Our simulations show how epitaxy theory breaks down in these systems and we explain the observed behaviour in terms of an interplay be…
▽ More
Recent research showed that the rotational degree of freedom in stacking 2D materials yields great changes in the electronic properties. Here we focus on an often overlooked question: are twisted geometries stable and what defines their rotational energy landscape? Our simulations show how epitaxy theory breaks down in these systems and we explain the observed behaviour in terms of an interplay between flexural phonons and the interlayer coupling, governed by Moiré superlattice. Our argument applied to the well-studied MoS$_2$/Graphene system rationalize experimental results and could serve as guidance to design twistronics devices.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Thermodynamic aspects of nanoscale friction
Authors:
Paola Carolina Torche,
Tomas Polcar,
Ondrej Hovorka
Abstract:
Develo** the non-equilibrium thermodynamics of friction is required for systematic design of low friction surfaces for a broad range of technological applications. Intuitively, the thermodynamic work done by a material sliding along a surface is expected to be partially dissipated as heat and partially transformed into the change of the internal energy of the system. However, general non-equilib…
▽ More
Develo** the non-equilibrium thermodynamics of friction is required for systematic design of low friction surfaces for a broad range of technological applications. Intuitively, the thermodynamic work done by a material sliding along a surface is expected to be partially dissipated as heat and partially transformed into the change of the internal energy of the system. However, general non-equilibrium thermodynamic principles governing this separation are presently unknown. We develop a theoretical framework based on the transition state theory combined with the conventional Prandtl-Tomlinson model, allowing to set explicit expressions for evaluating the heat dissipation and internal energy change produced during the frictional stick-slip motion of a tip of a typical friction force microscope (FFM). We use the formalism to quantify the heat dissipation for a range of parameters relevant to materials in practical applications of nanoscale friction.
△ Less
Submitted 6 November, 2019; v1 submitted 15 May, 2019;
originally announced May 2019.
-
Effects of layer thickness on the mechanical behavior of oxidation-strengthened Zr/Nb nanoscale multilayers
Authors:
M. A. Monclús,
M. Callisti,
T. Polcar,
L. W. Yang,
J. M. Molina-Aldareguía,
J. LLorca
Abstract:
The mechanical behaviour and deformation mechanisms of magnetron-sputtered Zr/Nb nanoscale multilayers were analysed as a function of the periodicity (L = 10 and 75 nm) and annealing time at 350C (2-336 hrs). The strength of the as-deposited multilayers was independent of the layer thickness and it was controlled by the co-deformation of the Zr and Nb layers. Annealing led to transformation of the…
▽ More
The mechanical behaviour and deformation mechanisms of magnetron-sputtered Zr/Nb nanoscale multilayers were analysed as a function of the periodicity (L = 10 and 75 nm) and annealing time at 350C (2-336 hrs). The strength of the as-deposited multilayers was independent of the layer thickness and it was controlled by the co-deformation of the Zr and Nb layers. Annealing led to transformation of the Zr layers into ZrO2 after a few hours, while the Nb layers oxidised at a much slower rate. The volumetric expansion associated with the oxidation led to the formation of cracks at the interfaces and within the ZrO2 layers for the multilayers with L = 75 nm but not in the case of L = 10 nm. The nanoindentation hardness increased significantly after annealing due to the contribution of the residual stresses associated with the volume increase due to oxidation and to the higher strength of the oxides. The strength increase after annealing, as measured by micropillar compression tests, was smaller than that measured by nanoindentation, as it did not include the contribution of the residual stresses, which were relieved during micropillar fabrication. The nanolaminate with L = 10 nm presented the highest strength and toughness as damage during oxidation was suppressed, and a deformation mechanism controlled by the formation of shear bands.
△ Less
Submitted 10 October, 2017; v1 submitted 13 May, 2017;
originally announced May 2017.
-
Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers
Authors:
M. A. Monclús,
M. Callisti,
T. Polcar,
L. W. Yang,
J. LLorca,
J. M. Molina-Aldareguía
Abstract:
The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by performing long term annealing on sputtered Zr/Nb nanoscale metallic multilayers and investigating the evolution of their microstructure and mechanical propert…
▽ More
The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by performing long term annealing on sputtered Zr/Nb nanoscale metallic multilayers and investigating the evolution of their microstructure and mechanical properties by combining analytical transmission electron microscopy, nano-mechanical tests and finite element models. As-deposited multilayers were annealed at 350 C in air for times ranging between 1 - 336 hours. The elastic modulus increased by approx. 20% and the hardness by approx. 42% after 15 hours of annealing. Longer annealing times did not lead to changes in hardness, although the elastic modulus increased up to 35% after 336 hrs. The hcp Zr layers were rapidly transformed into monoclinic ZrO2 (in the first 15 hours), while the Nb layers were progressively oxidised, from top surface down towards the substrate, to form an amorphous oxide phase at a much lower rate. The sequential oxidation of Zr and Nb layers was key for the oxidation to take place without rupture of the multi-layered structure and without coating spallation, as the plastic deformation of the metallic Nb layers allowed for the partial relieve of the residual stresses developed as a result of the volumetric expansion of the Zr layers upon oxidation. Moreover, the development of residual stresses induced further changes in mechanical properties in relation to the annealing time, as revealed by finite element simulations.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.