Showing 1–11 of 11 results for author: Polanco, C A

The Role of the Third Dimension in Searching Majorana Fermions in $α$-RuCl$_3$ via Phonons

Authors: Sai Mu, Kiranmayi D. Dixit, ** Wang, Douglas L. Abernathy, Huibo Cao, Stephen E. Nagler, Jiaqiang Yan, Paula Lampen-Kelley, David Mandrus, Carlos A. Polanco, Liangbo Liang, Gabor B. Halasz, Yongqiang Cheng, Arnab Banerjee, Tom Berlijn

Abstract: Understanding phonons in $α$-RuCl$_3$ is critical to analyze the controversy around the observation of the half-integer thermal quantum Hall effect. While many studies have focused on the magnetic excitations in $α$-RuCl$_3$, its vibrational excitation spectrum has remained relatively unexplored. We investigate the phonon structure of $α$-RuCl$_3$ via inelastic neutron scattering experiments and d… ▽ More Understanding phonons in $α$-RuCl$_3$ is critical to analyze the controversy around the observation of the half-integer thermal quantum Hall effect. While many studies have focused on the magnetic excitations in $α$-RuCl$_3$, its vibrational excitation spectrum has remained relatively unexplored. We investigate the phonon structure of $α$-RuCl$_3$ via inelastic neutron scattering experiments and density functional theory calculations. Our results show excellent agreement between experiment and first principles calculations. After validating our theoretical model, we extrapolate the low energy phonon properties. We find that the phonons in $α$-RuCl$_3$ that either propagate or vibrate in the out-of-plane direction have significantly reduced velocities, and therefore have the potential to dominate the observability of the elusive half integer plateaus in the thermal Hall conductance. In addition, we use low-energy interlayer phonons to resolve the low temperature stacking structure of our large crystal of $α$-RuCl$_3$, which we find to be consistent with that of the $R\bar{3}$ space group, in agreement with neutron diffraction. △ Less

Submitted 14 February, 2022; v1 submitted 14 November, 2021; originally announced November 2021.

Comments: The first two authors contributed equally

Journal ref: Phys. Rev. Research 4, 013067 (2022)

Success and breakdown of the T-matrix approximation for phonon-disorder scattering

Authors: S. Thébaud, C. A. Polanco, L. Lindsay, T. Berlijn

Abstract: We examine the validity of the widely used T-matrix approximation for treating phonon-disorder scattering by implementing an unfolding algorithm that allows simulation of disorder up to tens of millions of atoms. The T-matrix approximation breaks down for low-energy flexure phonons that play an important role in thermal transport in two-dimensional materials. Furthermore, insights are developed in… ▽ More We examine the validity of the widely used T-matrix approximation for treating phonon-disorder scattering by implementing an unfolding algorithm that allows simulation of disorder up to tens of millions of atoms. The T-matrix approximation breaks down for low-energy flexure phonons that play an important role in thermal transport in two-dimensional materials. Furthermore, insights are developed into the success of the T-matrix approximation in describing maximally mass disordered systems. To achieve this, the phonon unfolding formalism is generalized to describe mass disorder and strongly nonperturbative features of the spectrum are connected to the Boltzmann quasiparticle picture. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Journal ref: Phys. Rev. B 102, 094206 (2020)

Minimum and maximum conductance of a thin film layer bridged interface: the role of anharmonicity and layer thickness

Authors: **gjie Zhang, Rouzbeh Rastgarkafshgarkolaei, Carlos A. Polanco, Nam Q. Le, Keivan Esfarjani, Pamela M. Norris, Avik W. Ghosh

Abstract: We study the role of anharmonicity at interfaces with an added intermediate layer designed to facilitate interfacial phonon transport. Our results demonstrate that while in the harmonic limit the bridge may lower the conductance due to fewer available channels, anharmonicity can strongly enhance the thermal conductance of the bridged structure due to added inelastic channels. Moreover, we show tha… ▽ More We study the role of anharmonicity at interfaces with an added intermediate layer designed to facilitate interfacial phonon transport. Our results demonstrate that while in the harmonic limit the bridge may lower the conductance due to fewer available channels, anharmonicity can strongly enhance the thermal conductance of the bridged structure due to added inelastic channels. Moreover, we show that the effect of anharmonicity on the conductance can be tuned by varying temperature or the bridge layer thickness, as both parameters change the total rate of occurrence of phonon-phonon scattering processes. Additionally, we show that the additive rule of thermal resistances(Ohms law) is valid for bridge layer thickness quite shorter than the average bulk MFP, beyond the regime it would be expected to fail. △ Less

Submitted 16 October, 2019; originally announced October 2019.

Phonon-mediated thermal transport at exponentially mass-graded interfaces: A computational study

Authors: Rouzbeh Rastgarkafshgarkolaei, **gjie Zhang, Carlos A. Polanco, Nam Q. Le, Avik W. Ghosh, Pamela M. Norris

Abstract: We numerically investigate thermal transport at solid-solid interfaces with graded intermediate layers whose masses vary exponentially from one side to the other. Using Non-Equilibrium Green's Function and Non-Equilibrium Molecular Dynamics simulations, we show that an exponentially mass-graded junction with a finite thickness can result in 68\% of enhancement in thermal conductance larger compare… ▽ More We numerically investigate thermal transport at solid-solid interfaces with graded intermediate layers whose masses vary exponentially from one side to the other. Using Non-Equilibrium Green's Function and Non-Equilibrium Molecular Dynamics simulations, we show that an exponentially mass-graded junction with a finite thickness can result in 68\% of enhancement in thermal conductance larger compared to a single bridging layer (29\%) and a linear mass-graded junction (64\%) of similar thickness. We examine how the thermal conductance at such interfaces is influenced by geometric qualities and strength of anharmonicity. For geometric properties, we tested the effects from number of layers and the junction thickness. In the absence of anharmonicity, increasing the number of layers results in better elastic phonon transmission at each individual boundary, countered by the decrease of available conducting channels. Consequently, in the harmonic regime, conductance initially increases with number of layers due to better bridging, but quickly saturates. The presence of slight anharmonic effects (at ultra-low temperature T = 2 K) turns the saturation into a monotonically increasing trend. Anharmonic effects can facilitate interfacial thermal transport through the thermalization of phonons. At high temperature, however, the role of anharmonicity as a facilitator of interfacial thermal transport reverses. Strong anharmonicity introduces significant intrinsic resistance, overruling the enhancement in thermal conduction at the boundaries. Our analysis shows that in our model Lennard-Jones system, the influence of a mass-graded junction on thermal conductance is dominated by the phonon thermalization through anharmonic effects, while elastic phonon transmission plays a secondary role. △ Less

Submitted 12 September, 2018; originally announced September 2018.

Antisite pairs suppress the thermal conductivity of BAs

Authors: Qiang Zheng, Carlos A. Polanco, Mao-Hua Du, Lucas R. Lindsay, Miaofang Chi, Jiaqiang Yan, Brian C. Sales

Abstract: BAs was predicted to have an unusually high thermal conductivity at room temperature of 2000$\,$Wm$^{-1}$$\,$K$^{-1}$, comparable to that of diamond. However, the experimentally measured thermal conductivity of BAs single crystals is an order of magnitude lower. To identify the origin of this large inconsistency, we investigated the lattice structure and potential defects in BAs single crystals at… ▽ More BAs was predicted to have an unusually high thermal conductivity at room temperature of 2000$\,$Wm$^{-1}$$\,$K$^{-1}$, comparable to that of diamond. However, the experimentally measured thermal conductivity of BAs single crystals is an order of magnitude lower. To identify the origin of this large inconsistency, we investigated the lattice structure and potential defects in BAs single crystals at atomic scale using aberration-corrected scanning transmission electron microscopy (STEM). Rather than finding a large concentration As vacancies ($V_\mathrm{As}$), as widely thought to dominate the thermal resistance in BAs crystals, our STEM results showed enhanced intensity of some B columns and reduced intensity of some As columns, suggesting the presence of antisite defects with As$_\mathrm{B}$ (As-atom on B site) and B$_\mathrm{As}$ (B-atom on As site) with significant concentrations. Further calculations show that the antisite pair with As$_\mathrm{B}$ next to B$_\mathrm{As}$ is preferred energetically among the different types of point defects investigated, and confirm that such defects lower the thermal conductivity for BAs. Using a concentration of 6.6$\pm$3$\times$10$^{20}$$\,$cm$^{-3}$ for the antisite pairs estimated from STEM images, thermal conductivity is estimated to be 65-100$\,$Wm$^{-1}$$\,$K$^{-1}$, in reasonable agreement with our measured value. Our study suggests that As$_\mathrm{B}$-B$_\mathrm{As}$ antisite pairs are the primary lattice defects suppressing thermal conductivity of BAs. Possible approaches are proposed for growth of high quality crystals or films with high thermal conductivity. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Comments: 4 pages and 3 figures in main text; 4 pages and 4 figures in the Supplementary Material

Journal ref: Phys. Rev. Lett. 121, 105901 (2018)

Optimizing the interfacial thermal conductance at gold-alkane junctions from 'First Principles'

Authors: **gjie Zhang, Carlos A. Polanco, Avik W. Ghosh

Abstract: We theoretically explore the influence of end-group chemistry (bond stiffness and mass) on the interfacial thermal conductance at a gold-alkane interface. We accomplish this using the Non-Equilibrium Green's Function (NEGF) coupled with first principle parameters in Density Functional Theory (DFT) within the harmonic approximation. Our results indicate that the interfacial thermal conductance is n… ▽ More We theoretically explore the influence of end-group chemistry (bond stiffness and mass) on the interfacial thermal conductance at a gold-alkane interface. We accomplish this using the Non-Equilibrium Green's Function (NEGF) coupled with first principle parameters in Density Functional Theory (DFT) within the harmonic approximation. Our results indicate that the interfacial thermal conductance is not a monotonic function of either chemical parameters, but instead maximizes at an optimal set of mass and bonding strength. This maximum is a result of the interplay between the overlap in local density of states of the device and that in the contacts, as well as the phonon group velocity. We also demonstrate the intrinsic relationship between the Diffusive Mismatch Model (DMM) and the properties from NEGF, and provide an approach to get DMM from first principles NEGF. By comparing the NEGF based DMM conductance and range of conductance while altering the mass and bonding strength, we show that DMM provides an upper bound for elastic transport in this dimensionally mismatched system. We thus have a prescription to enhance the thermal conductance of systems at low temperatures or at low dimensions where inelastic scattering is considerably suppressed. △ Less

Submitted 14 December, 2016; originally announced December 2016.

Journal ref: J. Heat Transfer. 2018;140(9):092405

Effects of bulk and interfacial anharmonicity on thermal conductance at solid/solid interfaces

Authors: Nam Q. Le, Carlos A. Polanco, Rouzbeh Rastgarkafshgarkolaei, **gjie Zhang, Avik W. Ghosh, Pamela M. Norris

Abstract: We present the results of classical molecular dynamics simulations to assess the relative contributions to interfacial thermal conductance from inelastic phonon processes at the interface and in the adjacent bulk materials. The simulated system is the prototypical interface between argon and "heavy argon" crystals, which enables comparison with many past computational studies. We run simulations i… ▽ More We present the results of classical molecular dynamics simulations to assess the relative contributions to interfacial thermal conductance from inelastic phonon processes at the interface and in the adjacent bulk materials. The simulated system is the prototypical interface between argon and "heavy argon" crystals, which enables comparison with many past computational studies. We run simulations interchanging the Lennard-Jones potential with its harmonic approximation to test the effect of anharmonicity on conductance. The results confirm that the presence of anharmonicity is correlated with increasing thermal conductance with temperature, which supports conclusions from prior experimental and theoretical work. However, in the model Ar/heavy-Ar system, anharmonic effects at the interface itself contribute a surprisingly small part of the total thermal conductance. The larger fraction of the thermal conductance at high temperatures arises from anharmonic effects away from the interface. These observations are supported by comparisons of the spectral energy density, which suggest that bulk anharmonic processes increase interfacial conductance by thermalizing energy from modes with low transmission to modes with high transmission. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Journal ref: Phys. Rev. B 95, 245417 (2017)

Design rules for interfacial thermal conductance - building better bridges

Authors: Carlos A. Polanco, Rouzbeh Rastgarkafshgarkolaei, **gjie Zhang, Nam Le, Pamela M. Norris, Avik W. Ghosh

Abstract: We study the thermal conductance across solid-solid interfaces as the composition of an intermediate matching layer is varied. In absence of phonon-phonon interactions, an added layer can make the interfacial conductance increase or decrease depending on the interplay between (1) an increase in phonon transmission due to better bridging between the contacts, and (2) a decrease in the number of ava… ▽ More We study the thermal conductance across solid-solid interfaces as the composition of an intermediate matching layer is varied. In absence of phonon-phonon interactions, an added layer can make the interfacial conductance increase or decrease depending on the interplay between (1) an increase in phonon transmission due to better bridging between the contacts, and (2) a decrease in the number of available conduction channels that must conserve their momenta transverse to the interface. When phonon-phonon interactions are included, the added layer is seen to aid conductance when the decrease in resistances at the contact-layer boundaries compensate for the additional layer resistance. For the particular systems explored in this work, the maximum conductance happens when the layer mass is close to the geometric mean of the contact masses. The surprising result, usually associated with coherent antireflection coatings, follows from a monotonic increase in the boundary resistance with the interface mass ratio. This geometric mean condition readily extends to a compositionally graded interfacial layer with an exponentially varying mass that generates the thermal equivalent of a broadband impedance matching network. △ Less

Submitted 20 August, 2016; originally announced August 2016.

Comments: 21 pages, 8 figures

Journal ref: Phys. Rev. B 95, 195303 (2017)

Role of crystal structure and junction morphology on interface thermal conductance

Authors: Carlos A. Polanco, Rouzbeh Rastgarkafshgarkolaei, **gjie Zhang, Nam Q. Le, Pamela M. Norris, Patrick E. Hopkins, Avik W. Ghosh

Abstract: We argue that the relative thermal conductance between interfaces with different morphologies is controlled by crystal structure through $M_{min}/M_c > 1$, the ratio between the {\it minimum mode} count on either side $M_{min}$, and the {\it conserving modes} $M_c$ that preserve phonon momentum transverse to the interface. Junctions with an added homogenous layer, "uniform", and "abrupt" junctions… ▽ More We argue that the relative thermal conductance between interfaces with different morphologies is controlled by crystal structure through $M_{min}/M_c > 1$, the ratio between the {\it minimum mode} count on either side $M_{min}$, and the {\it conserving modes} $M_c$ that preserve phonon momentum transverse to the interface. Junctions with an added homogenous layer, "uniform", and "abrupt" junctions are limited to $M_c$ while junctions with interfacial disorder, "mixed", exploit the expansion of mode spectrum to $M_{min}$. In our studies with cubic crystals, the largest enhancement of conductance from "abrupt" to "mixed" interfaces seems to be correlated with the emergence of voids in the conserving modes, where $M_c = 0$. Such voids typically arise when the interlayer coupling is weakly dispersive, making the bands shift rigidly with momentum. Interfacial mixing also increases alloy scattering, which reduces conductance in opposition with the mode spectrum expansion. Thus the conductance across a "mixed' junction does not always increase relative to that at a "uniform" interface. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: 25 pages, 8 figures

Enhancing phonon flow through 1D interfaces by Impedance Matching

Authors: Carlos A. Polanco, Avik W. Ghosh

Abstract: We extend concepts from microwave engineering to thermal interfaces and explore the principles of impedance matching in 1D. The extension is based on the generalization of acoustic impedance to non linear dispersions using the contact broadening matrix $Γ(ω)$, extracted from the phonon self energy. For a single junction, we find that for coherent and incoherent phonons the optimal thermal conducta… ▽ More We extend concepts from microwave engineering to thermal interfaces and explore the principles of impedance matching in 1D. The extension is based on the generalization of acoustic impedance to non linear dispersions using the contact broadening matrix $Γ(ω)$, extracted from the phonon self energy. For a single junction, we find that for coherent and incoherent phonons the optimal thermal conductance occurs when the matching $Γ(ω)$ equals the Geometric Mean (GM) of the contact broadenings. This criteria favors the transmission of both low and high frequency phonons by requiring that (1) the low frequency acoustic impedance of the junction matches that of the two contacts by minimizing the sum of interfacial resistances; and (2) the cut-off frequency is near the minimum of the two contacts, thereby reducing the spillage of the states into the tunneling regime. For an ultimately scaled single atom/spring junction, the matching criteria transforms to the arithmetic mean for mass and the harmonic mean for spring constant. The matching can be further improved using a composite graded junction with an exponential varying broadening that functions like a broadband antireflection coating. There is however a trade off as the increased length of the interface brings in additional intrinsic sources of scattering. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Comments: 17 pages, 5 figures

Journal ref: J. Appl. Phys. 116, 083503 (2014)

Impedance Matching of Atomic Thermal Interfaces Using Primitive Block Decomposition

Authors: Carlos A. Polanco, Christopher B. Saltonstall, Pamela M. Norris, Patrick E. Hopkins, Avik W. Ghosh

Abstract: We explore the physics of thermal impedance matching at the interface between two dissimilar materials by controlling the properties of a single atomic mass or bond. The maximum thermal current is transmitted between the materials when we are able to decompose the entire heterostructure solely in terms of primitive building blocks of the individual materials. Using this approach, we show that the… ▽ More We explore the physics of thermal impedance matching at the interface between two dissimilar materials by controlling the properties of a single atomic mass or bond. The maximum thermal current is transmitted between the materials when we are able to decompose the entire heterostructure solely in terms of primitive building blocks of the individual materials. Using this approach, we show that the minimum interfacial thermal resistance arises when the interfacial atomic mass is the arithmetic mean, while the interfacial spring constant is the harmonic mean of its neighbors. The contact induced broadening matrix for the local vibronic spectrum, obtained from the self-energy matrices, generalizes the concept of acoustic impedance to the nonlinear phonon dispersion or the short-wavelength (atomic) limit. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Comments: 19 pages, 10 figures

Journal ref: Nanoscale and Microscale Thermophysical Engineering, 2013, 17, 263-279