-
Beam Tests of SNSPDs with 120 GeV Protons
Authors:
Sangbaek Lee,
Tomas Polakovic,
Whitney Armstrong,
Alan Dibos,
Timothy Draher,
Nathaniel Pastika,
Zein-Eddine Meziani,
Valentine Novosad
Abstract:
We report the test results for a 120 GeV proton beam incident on superconducting nanowire particle detectors of various wire sizes. NbN devices with the same sensitive area were fabricated with different wire widths and tested at a temperature of 2.8 K. The relative detection efficiency was extracted from bias current scans for each device. The results show that the wire width is a critical factor…
▽ More
We report the test results for a 120 GeV proton beam incident on superconducting nanowire particle detectors of various wire sizes. NbN devices with the same sensitive area were fabricated with different wire widths and tested at a temperature of 2.8 K. The relative detection efficiency was extracted from bias current scans for each device. The results show that the wire width is a critical factor in determining the detection efficiency and larger wire widths than 400 nm leads to inefficiencies at low bias currents. These results are particularly relevant for novel applications at accelerator facilities, such as the Electron-Ion Collider, where cryogenic cooling is readily available.
△ Less
Submitted 5 April, 2024; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Design and Performance of Parallel-channel Nanocryotrons in Magnetic Fields
Authors:
Timothy Draher,
Tomas Polakovic,
Yi Li,
John Pearson,
Alan Dibos,
Zein-Eddine Meziani,
Zhili Xiao,
Valentine Novosad
Abstract:
We introduce a design modification to conventional geometry of the cryogenic three-terminal switch, the nanocryotron (nTron). The conventional geometry of nTrons is modified by including parallel current-carrying channels, an approach aimed at enhancing the device's performance in magnetic field environments. The common challenge in nTron technology is to maintain efficient operation under varying…
▽ More
We introduce a design modification to conventional geometry of the cryogenic three-terminal switch, the nanocryotron (nTron). The conventional geometry of nTrons is modified by including parallel current-carrying channels, an approach aimed at enhancing the device's performance in magnetic field environments. The common challenge in nTron technology is to maintain efficient operation under varying magnetic field conditions. Here we show that the adaptation of parallel channel configurations leads to an enhanced gate signal sensitivity, an increase in operational gain, and a reduction in the impact of superconducting vortices on nTron operation within magnetic fields up to 1 Tesla. Contrary to traditional designs that are constrained by their effective channel width, the parallel nanowire channels permits larger nTron cross sections, further bolstering the device's magnetic field resilience while improving electro-thermal recovery times due to reduced local inductance. This advancement in nTron design not only augments its functionality in magnetic fields but also broadens its applicability in technological environments, offering a simple design alternative to existing nTron devices.
△ Less
Submitted 4 December, 2023; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Programmable Real-Time Magnon Interference in Two Remotely Coupled Magnonic Resonators
Authors:
Moojune Song,
Tomas Polakovic,
**ho Lim,
Thomas W. Cecil,
John Pearson,
Ralu Divan,
Wai-Kwong Kwok,
Ulrich Welp,
Axel Hoffmann,
Kab-** Kim,
Valentine Novosad,
Yi Li
Abstract:
Magnon interference is a signature of coherent magnon interactions for coherent information processing. In this work, we demonstrate programmable real-time magnon interference, with examples of nearly perfect constructive and destructive interference, between two remotely coupled yttrium iron garnet spheres mediated by a coplanar superconducting resonator. Exciting one of the coupled resonators by…
▽ More
Magnon interference is a signature of coherent magnon interactions for coherent information processing. In this work, we demonstrate programmable real-time magnon interference, with examples of nearly perfect constructive and destructive interference, between two remotely coupled yttrium iron garnet spheres mediated by a coplanar superconducting resonator. Exciting one of the coupled resonators by injecting single- and double-microwave pulse leads to the coherent energy exchange between the remote magnonic resonators and allows us to realize a programmable magnon interference that can define an arbitrary state of coupled magnon oscillation. The demonstration of time-domain coherent control of remotely coupled magnon dynamics offers new avenues for advancing coherent information processing with circuit-integrated hybrid magnonic networks.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Tunable Magnon-Photon Coupling by Magnon Band Gap in a Layered Hybrid Perovskite Antiferromagnet
Authors:
Yi Li,
Timothy Draher,
Andrew H. Comstock,
Yuzan Xiong,
Md Azimul Haque,
Elham Easy,
Jiang-Chao Qian,
Tomas Polakovic,
John E. Pearson,
Ralu Divan,
Jian-Min Zuo,
Xian Zhang,
Ulrich Welp,
Wai-Kwong Kwok,
Axel Hoffmann,
Joseph M. Luther,
Matthew C. Beard,
Dali Sun,
Wei Zhang,
Valentine Novosad
Abstract:
Tunability of coherent coupling between fundamental excitations is an important prerequisite for expanding their functionality in hybrid quantum systems. In hybrid magnonics, the dipolar interaction between magnon and photon usually persists and cannot be switched off. Here, we demonstrate this capability by coupling a superconducting resonator to a layered hybrid perovskite antiferromagnet, which…
▽ More
Tunability of coherent coupling between fundamental excitations is an important prerequisite for expanding their functionality in hybrid quantum systems. In hybrid magnonics, the dipolar interaction between magnon and photon usually persists and cannot be switched off. Here, we demonstrate this capability by coupling a superconducting resonator to a layered hybrid perovskite antiferromagnet, which exhibits a magnon band gap due to its intrinsic Dzyaloshinskii-Moriya interaction. The pronounced temperature sensitivity of the magnon band gap location allows us to set the photon mode within the gap and to disable magnon-photon hybridization. When the resonator mode falls into the magnon band gap, the resonator dam** rate increases due to the nonzero coupling to the detuned magnon mode. This phenomena can be used to quantify the magnon band gap using an analytical model. Our work brings new opportunities in controlling coherent information processing with quantum properties in complex magnetic materials.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Ion-beam Assisted Sputtering of Titanium Nitride Thin Films
Authors:
Timothy Draher,
Tomas Polakovic,
Juliang Li,
Yi Li,
Ulrich Welp,
Jidong Samuel Jiang,
John Pearson,
Whitney Armstrong,
Zein-Eddine Meziani,
Clarence Chang,
Wai-Kwong Kwok,
Zhili Xiao,
Valentine Novosad
Abstract:
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In previous work on niobium nitride, ion beam-assisted sputtering (IBAS) reduced nitrogen sensitivity during deposition in tandem with an increase in nominal critical t…
▽ More
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In previous work on niobium nitride, ion beam-assisted sputtering (IBAS) reduced nitrogen sensitivity during deposition in tandem with an increase in nominal critical temperature. We have deposited thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method and compare their superconducting critical temperatures Tc as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and X-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature and 33% reduced sensitivity to nitrogen flow, without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting Tc in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting Tc due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.
△ Less
Submitted 12 April, 2023; v1 submitted 26 October, 2022;
originally announced October 2022.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
Coherent coupling of two remote magnonic resonators mediated by superconducting circuits
Authors:
Yi Li,
Volodymyr G. Yefremenko,
Marharyta Lisovenko,
Cody Trevillian,
Tomas Polakovic,
Thomas W. Cecil,
Pete S. Barry,
John Pearson,
Ralu Divan,
Vasyl Tyberkevych,
Clarence L. Chang,
Ulrich Welp,
Wai-Kwong Kwok,
Valentine Novosad
Abstract:
We demonstrate microwave-mediated distant magnon-magnon coupling on a superconducting circuit platform, incorporating chip-mounted single-crystal Y$_3$Fe$_5$O$_{12}$ (YIG) spheres. Coherent level repulsion and dissipative level attraction between the magnon modes of the two YIG spheres are demonstrated. The former is mediated by cavity photons of a superconducting resonator, and the latter is medi…
▽ More
We demonstrate microwave-mediated distant magnon-magnon coupling on a superconducting circuit platform, incorporating chip-mounted single-crystal Y$_3$Fe$_5$O$_{12}$ (YIG) spheres. Coherent level repulsion and dissipative level attraction between the magnon modes of the two YIG spheres are demonstrated. The former is mediated by cavity photons of a superconducting resonator, and the latter is mediated by propagating photons of a coplanar waveguide. Our results open new avenues towards exploring integrated hybrid magnonic networks for coherent information processing on a quantum-compatible superconducting platform.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
A CUPID Li$_{2}$$^{100}$MoO$_4$ scintillating bolometer tested in the CROSS underground facility
Authors:
The CUPID Interest Group,
A. Armatol,
E. Armengaud,
W. Armstrong,
C. Augier,
F. T. Avignone III,
O. Azzolini,
I. C. Bandac,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
M. Beretta,
L. Bergé,
Ch. Bourgeois,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. M. Calvo-Mozota,
J. Camilleri
, et al. (156 additional authors not shown)
Abstract:
A scintillating bolometer based on a large cubic Li$_{2}$$^{100}$MoO$_4$ crystal (45 mm side) and a Ge wafer (scintillation detector) has been operated in the CROSS cryogenic facility at the Canfranc underground laboratory in Spain. The dual-readout detector is a prototype of the technology that will be used in the next-generation $0\nu2β$ experiment CUPID. The measurements were performed at 18 an…
▽ More
A scintillating bolometer based on a large cubic Li$_{2}$$^{100}$MoO$_4$ crystal (45 mm side) and a Ge wafer (scintillation detector) has been operated in the CROSS cryogenic facility at the Canfranc underground laboratory in Spain. The dual-readout detector is a prototype of the technology that will be used in the next-generation $0\nu2β$ experiment CUPID. The measurements were performed at 18 and 12 mK temperature in a pulse tube dilution refrigerator. This setup utilizes the same technology as the CUORE cryostat that will host CUPID and so represents an accurate estimation of the expected performance. The Li$_{2}$$^{100}$MoO$_4$ bolometer shows a high energy resolution of 6 keV FWHM at the 2615 keV $γ$ line. The detection of scintillation light for each event triggered by the Li$_{2}$$^{100}$MoO$_4$ bolometer allowed for a full separation ($\sim$8$σ$) between $γ$($β$) and $α$ events above 2 MeV. The Li$_{2}$$^{100}$MoO$_4$ crystal also shows a high internal radiopurity with $^{228}$Th and $^{226}$Ra activities of less than 3 and 8 $μ$Bq/kg, respectively. Taking also into account the advantage of a more compact and massive detector array, which can be made of cubic-shaped crystals (compared to the cylindrical ones), this test demonstrates the great potential of cubic Li$_{2}$$^{100}$MoO$_4$ scintillating bolometers for high-sensitivity searches for the $^{100}$Mo $0\nu2β$ decay in CROSS and CUPID projects.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Characterization of cubic Li$_{2}$$^{100}$MoO$_4$ crystals for the CUPID experiment
Authors:
A. Armatol,
E. Armengaud,
W. Armstrong,
C. Augier,
F. T. Avignone III,
O. Azzolini,
A. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
M. Beretta,
L. Bergè,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
S. Capelli,
L. Cappelli,
L. Cardani,
P. Carniti
, et al. (147 additional authors not shown)
Abstract:
The CUPID Collaboration is designing a tonne-scale, background-free detector to search for double beta decay with sufficient sensitivity to fully explore the parameter space corresponding to the inverted neutrino mass hierarchy scenario. One of the CUPID demonstrators, CUPID-Mo, has proved the potential of enriched Li$_{2}$$^{100}$MoO$_4$ crystals as suitable detectors for neutrinoless double beta…
▽ More
The CUPID Collaboration is designing a tonne-scale, background-free detector to search for double beta decay with sufficient sensitivity to fully explore the parameter space corresponding to the inverted neutrino mass hierarchy scenario. One of the CUPID demonstrators, CUPID-Mo, has proved the potential of enriched Li$_{2}$$^{100}$MoO$_4$ crystals as suitable detectors for neutrinoless double beta decay search. In this work, we characterised cubic crystals that, compared to the cylindrical crystals used by CUPID-Mo, are more appealing for the construction of tightly packed arrays. We measured an average energy resolution of (6.7$\pm$0.6) keV FWHM in the region of interest, approaching the CUPID target of 5 keV FWHM. We assessed the identification of $α$ particles with and without a reflecting foil that enhances the scintillation light collection efficiency, proving that the baseline design of CUPID already ensures a complete suppression of this $α$-induced background contribution. We also used the collected data to validate a Monte Carlo simulation modelling the light collection efficiency, which will enable further optimisations of the detector.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Novel technique for the study of pile-up events in cryogenic bolometers
Authors:
A. Armatol,
E. Armengaud,
W. Armstrong,
C. Augier,
F. T. Avignone III,
O. Azzolini,
A. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
M. Beretta,
L. Bergé,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
S. Capelli,
L. Cappelli,
L. Cardani,
P. Carniti
, et al. (144 additional authors not shown)
Abstract:
Precise characterization of detector time resolution is of crucial importance for next-generation cryogenic-bolometer experiments searching for neutrinoless double-beta decay, such as CUPID, in order to reject background due to pile-up of two-neutrino double-beta decay events. In this paper, we describe a technique developed to study the pile-up rejection capability of cryogenic bolometers. Our ap…
▽ More
Precise characterization of detector time resolution is of crucial importance for next-generation cryogenic-bolometer experiments searching for neutrinoless double-beta decay, such as CUPID, in order to reject background due to pile-up of two-neutrino double-beta decay events. In this paper, we describe a technique developed to study the pile-up rejection capability of cryogenic bolometers. Our approach, which consists of producing controlled pile-up events with a programmable waveform generator, has the benefit that we can reliably and reproducibly control the time separation and relative energy of the individual components of the generated pile-up events. The resulting data allow us to optimize and benchmark analysis strategies to discriminate between individual and pile-up pulses. We describe a test of this technique performed with a small array of detectors at the Laboratori Nazionali del Gran Sasso, in Italy; we obtain a 90% rejection efficiency against pulser-generated pile-up events with rise time of ~15ms down to time separation between the individual events of about 2ms.
△ Less
Submitted 12 July, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Controlling $T_c$ of Iridium Films Using the Proximity Effect
Authors:
R. Hennings-Yeomans,
C. L. Chang,
J. Ding,
A. Drobizhev,
B. K. Fujikawa,
S. Han,
G. Karapetrov,
Yu. G. Kolomensky,
V. Novosad,
T. O'Donnell,
J. L. Ouellet,
J. Pearson,
T. Polakovic,
D. Reggio,
B. Schmidt,
B. Sheff,
V. Singh,
R. J. Smith,
G. Wang,
B. Welliver,
V. G. Yefremenko,
J. Zhang
Abstract:
A superconducting Transition-Edge Sensor (TES) with low-$T_c$ is essential in a high resolution calorimetric detection. With a motivation of develo** sensitive calorimeters for applications in cryogenic neutrinoless double beta decay searches, we have been investigating methods to reduce the $T_c$ of an Ir film down to 20 mK. Utilizing the proximity effect between a superconductor and a normal m…
▽ More
A superconducting Transition-Edge Sensor (TES) with low-$T_c$ is essential in a high resolution calorimetric detection. With a motivation of develo** sensitive calorimeters for applications in cryogenic neutrinoless double beta decay searches, we have been investigating methods to reduce the $T_c$ of an Ir film down to 20 mK. Utilizing the proximity effect between a superconductor and a normal metal, we found two room temperature fabrication recipes of making Ir-based low-$T_c$ films. In the first approach, an Ir film sandwiched between two Au films, a Au/Ir/Au trilayer, has a tunable $T_c$ in the range of 20-100 mK depending on the relative thicknesses. In the second approach, a paramagnetic Pt thin film is used to create Ir/Pt bilayer with a tunable $T_c$ in the same range. We present detailed study of fabrication and characterization of Ir-based low-$T_c$ films, and compare the experimental results to theoretical models. We show that Ir-based films with predictable and reproducible critical temperature can be consistently fabricated for use in large scale detector applications.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Temperature-Dependent Anisotropic Magnetoresistance and Spin-Torque-Driven Vortex Dynamics in a Single Microdisk
Authors:
Sergi Lendinez,
Tomas Polakovic,
Junjia Ding,
Matthias Benjamin Jungfleisch,
John E. Pearson,
Axel Hoffmann,
Valentine Novosad
Abstract:
Spin-orbit-torque-driven dynamics have recently gained interest in the field of magnetism due to the reduced requirement of current densities and an increase in efficiency, as well as the ease of implementation of different devices and materials. From a practical point of view, the low-frequency dynamics below 1 GHz is particularly interesting since dynamics associated with magnetic domains lie in…
▽ More
Spin-orbit-torque-driven dynamics have recently gained interest in the field of magnetism due to the reduced requirement of current densities and an increase in efficiency, as well as the ease of implementation of different devices and materials. From a practical point of view, the low-frequency dynamics below 1 GHz is particularly interesting since dynamics associated with magnetic domains lie in this frequency range. While spin-torque excitation of high-frequency modes has been extensively studied, the intermediate low-frequency dynamics have received less attention, although spin torques could potentially be used for both manipulation of the spin texture, as well as the excitation of dynamics. In this work, we demonstrate that it is possible to drive magnetic vortex dynamics in a single microdisk by spin-Hall torque at varying temperatures, and relate the results to transport properties. We find that the gyrotropic mode of the core couples to the low-frequency microwave signal and produces a measurable voltage. The dynamic measurements are in agreement with magnetic transport measurements and are supported by micromagnetic simulations. Our results open the door for integrating magnetic vortex devices in spintronic applications.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Superconducting nanowires as high-rate photon detectors in strong magnetic fields
Authors:
T. Polakovic,
W. R. Armstrong,
V. Yefremenko,
J. E. Pearson,
K. Hafidi,
G. Karapetrov,
Z. -E. Meziani,
V. Novosad
Abstract:
Superconducting nanowire single photon detectors are capable of single-photon detection across a large spectral range, with near unity detection efficiency, picosecond timing jitter, and sub-10 $μ$m position resolution at rates as high as 10$^{9}$ counts/s. In an effort to bring this technology into nuclear physics experiments, we fabricate Niobium Nitride nanowire detectors using ion beam assiste…
▽ More
Superconducting nanowire single photon detectors are capable of single-photon detection across a large spectral range, with near unity detection efficiency, picosecond timing jitter, and sub-10 $μ$m position resolution at rates as high as 10$^{9}$ counts/s. In an effort to bring this technology into nuclear physics experiments, we fabricate Niobium Nitride nanowire detectors using ion beam assisted sputtering and test their performance in strong magnetic fields. We demonstrate that these devices are capable of detection of 400 nm wavelength photons with saturated internal quantum efficiency at temperatures of 3 K and in magnetic fields potentially up to 5 T at high rates and with nearly zero dark counts.
△ Less
Submitted 12 November, 2019; v1 submitted 30 July, 2019;
originally announced July 2019.
-
Opportunities for Nuclear Physics & Quantum Information Science
Authors:
Ian C. Cloët,
Matthew R. Dietrich,
John Arrington,
Alexei Bazavov,
Michael Bishof,
Adam Freese,
Alexey V. Gorshkov,
Anna Grassellino,
Kawtar Hafidi,
Zubin Jacob,
Michael McGuigan,
Yannick Meurice,
Zein-Eddine Meziani,
Peter Mueller,
Christine Muschik,
James Osborn,
Matthew Otten,
Peter Petreczky,
Tomas Polakovic,
Alan Poon,
Raphael Pooser,
Alessandro Roggero,
Mark Saffman,
Brent VanDevender,
Jiehang Zhang
, et al. (1 additional authors not shown)
Abstract:
This whitepaper is an outcome of the workshop Intersections between Nuclear Physics and Quantum Information held at Argonne National Laboratory on 28-30 March 2018 [www.phy.anl.gov/npqi2018/]. The workshop brought together 116 national and international experts in nuclear physics and quantum information science to explore opportunities for the two fields to collaborate on topics of interest to the…
▽ More
This whitepaper is an outcome of the workshop Intersections between Nuclear Physics and Quantum Information held at Argonne National Laboratory on 28-30 March 2018 [www.phy.anl.gov/npqi2018/]. The workshop brought together 116 national and international experts in nuclear physics and quantum information science to explore opportunities for the two fields to collaborate on topics of interest to the U.S. Department of Energy (DOE) Office of Science, Office of Nuclear Physics, and more broadly to U.S. society and industry. The workshop consisted of 22 invited and 10 contributed talks, as well as three panel discussion sessions. Topics discussed included quantum computation, quantum simulation, quantum sensing, nuclear physics detectors, nuclear many-body problem, entanglement at collider energies, and lattice gauge theories.
△ Less
Submitted 30 July, 2019; v1 submitted 13 March, 2019;
originally announced March 2019.
-
Strong magnon-photon coupling in ferromagnet-superconducting resonator thin-film devices
Authors:
Yi Li,
Tomas Polakovic,
Yong-Lei Wang,
**g Xu,
Sergi Lendinez,
Zhizhi Zhang,
Junjia Ding,
Trupti Khaire,
Hilal Saglam,
Ralu Divan,
John Pearson,
Wai-Kwong Kwok,
Zhili Xiao,
Valentine Novosad,
Axel Hoffmann,
Wei Zhang
Abstract:
We demonstrate strong magnon-photon coupling of a thin-film permalloy device fabricated on a coplanar superconducting resonator. A coupling strength of 0.152 GHz and a cooperativity of 68 are found for a 30-nm-thick permalloy stripe. The coupling strength is tunable by rotating the biasing magnetic field or changing the volume of permalloy. We also observe an enhancement of magnon-photon coupling…
▽ More
We demonstrate strong magnon-photon coupling of a thin-film permalloy device fabricated on a coplanar superconducting resonator. A coupling strength of 0.152 GHz and a cooperativity of 68 are found for a 30-nm-thick permalloy stripe. The coupling strength is tunable by rotating the biasing magnetic field or changing the volume of permalloy. We also observe an enhancement of magnon-photon coupling in the nonlinear regime of the superconducting resonator, which is mediated by the nucleation of dynamic flux vortices. Our results demonstrate a critical step towards future integrated hybrid systems for quantum magnonics and on-chip coherent information transfer.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Thermal Behavior of a Single Magnetic Vortex Studied with Magnetotransport
Authors:
Sergi Lendinez,
Junjia Ding,
Tomas Polakovic,
John E. Pearson,
Axel Hoffmann,
Valentyn Novosad
Abstract:
Spin textures such as skyrmions and magnetic vortices are good candidates for a variety of applications, such as magnetic memories, oscillators and neuromorphic computing. Understanding the magnetic process of these systems is important, as it determines the system's response in field and frequency. In this work, we investigated the magnetization process of single microdisks by measuring their mag…
▽ More
Spin textures such as skyrmions and magnetic vortices are good candidates for a variety of applications, such as magnetic memories, oscillators and neuromorphic computing. Understanding the magnetic process of these systems is important, as it determines the system's response in field and frequency. In this work, we investigated the magnetization process of single microdisks by measuring their magnetotransport properties as a function of temperature. The strong dependence of resistance on the disks magnetic state helped us understand the magnetization configurations of a single microdisk for different temperatures and fields. We determined the thermal barriers for the nucleation and annihilation processes by fitting the nucleation and annihilation fields to an exponential model. Moreover, we observed and characterized the domain wall depinning effect for temperatures below 100 K. This effect prevents the formation of a magnetic vortex during the nucleation process.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
-
Room temperature deposition of superconducting Niobium Nitride films by ion beam assisted sputtering
Authors:
Tomas Polakovic,
Sergi Lendinez,
John E. Pearson,
Axel Hoffmann,
Volodymyr Yefremenko,
Clarence L. Chang,
Whitney Armstrong,
John Arrington,
Kawtar Hafidi,
Goran Karapetrov,
Valentine Novosad
Abstract:
We use room temperature ion beam assisted sputtering (IBAS) to deposit niobium nitride thin films. Electrical and structural characterizations were performed by electric transport and magnetization measurements at variable temperatures, X-ray diffraction and atomic force microscopy. Compared to reactive sputtering of NbN, films sputtered in presence of an ion beam show remarkable increase in the s…
▽ More
We use room temperature ion beam assisted sputtering (IBAS) to deposit niobium nitride thin films. Electrical and structural characterizations were performed by electric transport and magnetization measurements at variable temperatures, X-ray diffraction and atomic force microscopy. Compared to reactive sputtering of NbN, films sputtered in presence of an ion beam show remarkable increase in the superconducting critical temperature T$_{\rm{c}}$, while exhibiting lower sensitivity to nitrogen concentration during deposition. Thickness dependence of the superconducting critical temperature is comparable to films prepared by conventional methods at high substrate temperatures and is consistent with behavior driven by quantum size effects or weak localization.
△ Less
Submitted 27 June, 2018; v1 submitted 6 March, 2018;
originally announced March 2018.
-
Controlling $T_c$ of Iridium films using interfacial proximity effects
Authors:
R. Hennings-Yeomans,
C. L. Chang,
J. Ding,
A. Drobizhev,
B. K. Fujikawa,
S. Han,
G. Karapetrov,
Yu. G. Kolomensky,
V. Novosad,
T. O'Donnell,
J. L. Ouellet,
J. Pearson,
T. Polakovic,
D. Reggio,
B. Schmidt,
B. Sheff,
R. J. Smith,
G. Wang,
B. Welliver,
V. G. Yefremenko
Abstract:
High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable $T_c$, depending on the application. To advance high-precision macrocalorimetry, we require low-$T_c$ films that are easy to fabricate. A simple and effective way to suppress $T_c$ of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt b…
▽ More
High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable $T_c$, depending on the application. To advance high-precision macrocalorimetry, we require low-$T_c$ films that are easy to fabricate. A simple and effective way to suppress $T_c$ of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt bilayers as well as Au/Ir/Au trilayers. While Ir/Au films fabricated by applying heat to the substrate during Ir deposition have been used in the past for superconducting sensors, we present results of $T_c$ suppression on Iridium by deposition at room temperature in Au/Ir/Au trilayers and Ir/Pt bilayers in the range of $\sim$20-100~mK. Measurements of the relative impedance between the Ir/Pt bilayers and Au/Ir/Au trilayers fabricated show factor of $\sim$10 higher values in the Ir/Pt case. These new films could play a key role in the development of scalable superconducting transition edge sensors that require low-$T_c$ films to minimize heat capacity and maximize energy resolution, while kee** high-yield fabrication methods.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
