-
Local electrochemical characterization of active Mg-Fe materials: from pure Mg to Mg50-Fe composites
Authors:
Noémie Ott,
Aurélien Tournier Fillon,
Oliver Renk,
Thomas Kremmer,
Stefan Pogatscher,
Thomas Suter,
Patrik Schmutz
Abstract:
This study demonstrates the applicability of the scanning electrochemical nanocapillary (SEN) technique to characterize the local surface reactivity of active systems, such as Mg-based materials. Owing to its confined electrolyte configuration, one undeniable strength of the method is to provide with unprecedented resolution direct visualization and assessment of the presence, distribution and nob…
▽ More
This study demonstrates the applicability of the scanning electrochemical nanocapillary (SEN) technique to characterize the local surface reactivity of active systems, such as Mg-based materials. Owing to its confined electrolyte configuration, one undeniable strength of the method is to provide with unprecedented resolution direct visualization and assessment of the presence, distribution and nobility of different phases. High lateral resolution open-circuit potential (OCP) scans on single Fe-rich particles in Mg confirms that these particles serve as local cathodes while evidencing enhanced surface activation at the interfacial area between the particle and the Mg matrix. Valuable insights about nanoscale galvanic coupling within an intermetallic particle can therefore be retrieved, which are otherwise not accessible. On more complex systems, such as Mg50-Fe composites, the SEN technique allows individual assessment of the reactivity of the different microscale phases. By combining OCP scans and local potentiodynamic polarization measurements, we reveal that changes in surface reactivity and stability of Mg-rich phases in these composites are directly correlated to their different microstructure, i.e. phase spacing and composition, which are intrinsically linked to their processing parameters. The SEN technique is therefore an excellent tool to help us refine our mechanistic understanding of initial stages of corrosion in heterogeneous materials.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry
Authors:
M. A. Tunes,
D. Parkison,
B. Sun,
P. Willenshofer,
S. Samberger,
B. K. Derby,
J. K. S. Baldwin,
S. J. Fensin,
D. Sobieraj,
J. S. Wróbel,
J. Byggmästar,
S. Pogatscher,
E. Martinez,
D. Nguyen-Manh,
O. El-Atwani
Abstract:
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii)…
▽ More
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Radiation-resistant aluminium alloy for space missions in the extreme environment of the solar system
Authors:
Patrick D. Willenshofer,
Matheus A. Tunes,
Ho T. Vo,
Lukas Stemper,
Oliver Renk,
Graeme Greaves,
Peter J. Uggowitzer,
Stefan Pogatscher
Abstract:
Future human-based exploration of our solar system requires the invention of materials that can resist harsh environments. Age-hardenable aluminium alloys would be attractive candidates for structural components in long-distance spacecrafts, but their radiation resistance to solar energetic particles is insufficient. Common hardening phases dissolve and displacement damage occurs in the alloy matr…
▽ More
Future human-based exploration of our solar system requires the invention of materials that can resist harsh environments. Age-hardenable aluminium alloys would be attractive candidates for structural components in long-distance spacecrafts, but their radiation resistance to solar energetic particles is insufficient. Common hardening phases dissolve and displacement damage occurs in the alloy matrix, which strongly degrades properties. Here we present an alloy where hardening is achieved by T-phase, featuring a giant unit cell and highly-negative enthalpy of formation. The phase shows record radiation survivability and can stabilize an ultrafine-grained structure upon temperature and radiation in the alloy, therby successfully preventing displacement damage to occur. Such concept can be considered ideal for the next-generation space materials and the design of radiation resistant alloy.
△ Less
Submitted 12 October, 2022; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Precipitation in lean Mg-Zn-Ca alloys
Authors:
R. E. Schaublin,
M. Becker,
M. Cihova,
S. S. A. Gerstl,
D. Deiana,
C. Hebert,
S. Pogatscher,
P. J. Uggowitzer,
J. F. Loffler
Abstract:
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were o…
▽ More
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were observed at 125, 250 and 320 C. The microstructure at the end of these peaks (205, 260 and 350 C) was probed in a multiscale correlative approach using atom probe tomography (APT) and transmission electron microscopy (TEM). At 205 C, APT analysis revealed Ca-rich, Zn-rich and Zn-Ca-rich clusters of about 3 nm in size and with a number density of 5.7 x 10^23 m^-3. At 260 C, APT and TEM showed mono-layered Zn-Ca-rich Guinier-Preston (GP) zones of about 8 nm in size and with a number density of 1.3 x 10^23 m^-3. At 350 C, there are larger, highly coherent elongated precipitates of about 50 nm in size, in a lower number density, and of two types: either binary Mg2Ca precipitates or less numerous ternary Ca2Mg6Zn3 precipitates, as deduced from scanning TEM-based energy dispersive X-ray spectrometry (EDS) and nanodiffraction in TEM. The highest hardening, probed by Vickers testing, relates to the end of the 125 C DSC peak and thus to GP zones, which outperform the hardening induced by the nanoscale clusters and the larger intermetallic particles. Precipitation in ZX20 upon linear heating was compared to the one induced by hot extrusion at 330 C. Here, ternary precipitates outnumber the binary ones and are larger, incoherent, and in a much lower number density. They are unequivocally made of hexagonal Ca2Mg5Zn5, as deduced by atomically resolved EDS map** and scanning TEM imaging, and supported by simulations. Precipitation complexity of in lean Mg-Zn-Ca alloys and its kinetic path are discussed.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
MEMS-based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
Authors:
Phillip Dumitraschkewitz,
Matheus A. Tunes,
Cameron R. Quick,
Diego Santa Rosa Coradini,
Thomas M. Kremmer,
Parthiban Ramasamy,
Peter J. Uggowitzer,
Stefan Pogatscher
Abstract:
The solidification behavior of a eutectic AlCu specimen is investigated via in situ scanning transmission electron microscope (STEM) experiments. Solidification conditions are varied by imposing various cooling conditions via a micro-electro-mechanical system (MEMS) based membrane. The methodology allows the use of material processed by a melting and casting route close to industrial metallurgical…
▽ More
The solidification behavior of a eutectic AlCu specimen is investigated via in situ scanning transmission electron microscope (STEM) experiments. Solidification conditions are varied by imposing various cooling conditions via a micro-electro-mechanical system (MEMS) based membrane. The methodology allows the use of material processed by a melting and casting route close to industrial metallurgically fabricated material for in situ STEM solidification studies. Different rapid solidification morphologies could be obtained solely on a single specimen by the demonstrated strategy. Additional post-solidification heat treatments are investigated in terms of observation of spheroidization of lamellas during annealing at elevated temperatures.
△ Less
Submitted 5 August, 2022; v1 submitted 8 January, 2021;
originally announced January 2021.
-
A contamination-free electron-transparent metallic sample preparation method for MEMS experiments with in situ S/TEM
Authors:
Matheus A. Tunes,
Cameron Quick,
Lukas Stemper,
Diego S. R. Coradini,
Jakob Grasserbauer,
Phillip Dumitraschkewitz,
Thomas M. Kremmer,
Stefan Pogatscher
Abstract:
Microelectromechanical systems (MEMS) are currently supporting ground-breaking basic research in materials science and metallurgy as they allow in situ experiments on materials at the nanoscale within electron-microscopes in a wide variety of different conditions such as extreme materials dynamics under ultrafast heating and quenching rates as well as in complex electro-chemical environments. Elec…
▽ More
Microelectromechanical systems (MEMS) are currently supporting ground-breaking basic research in materials science and metallurgy as they allow in situ experiments on materials at the nanoscale within electron-microscopes in a wide variety of different conditions such as extreme materials dynamics under ultrafast heating and quenching rates as well as in complex electro-chemical environments. Electron-transparent sample preparation for MEMS e-chips remains a challenge for this technology as the existing methodologies can introduce contaminants, thus disrupting the experiments and the analysis of results. Herein we introduce a methodology for simple and fast electron-transparent sample preparation for MEMS e-chips without significant contamination. The quality of the samples as well as their performance during a MEMS e-chip experiment in situ within an electron-microscope are evaluated during a heat treatment of a crossover AlMgZn(Cu) alloy.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
