-
Coupling Temperature Distribution with the Single Particle Model
Authors:
Matthew Hunt,
Florian Theil,
Ferran Brosa Planella,
W. Dhammika Widanage
Abstract:
The DFN (Doyle-Fuller-Newman) model is well know for being accurate and computationally expensive. In situations where temperature gradients are important (eg fast charging) it is desirable to couple the temperature dynamics within a battery into the DFN model. This leads to even greater computational complexity. Inspired by the work of Marquis et al [1] we present the derivation of a reduced-orde…
▽ More
The DFN (Doyle-Fuller-Newman) model is well know for being accurate and computationally expensive. In situations where temperature gradients are important (eg fast charging) it is desirable to couple the temperature dynamics within a battery into the DFN model. This leads to even greater computational complexity. Inspired by the work of Marquis et al [1] we present the derivation of a reduced-order model based on the DFN model with temperature in the macroscale. The complexity of the reduced-order model is characterised by the local temperature plus one internal electro-chemical dimension and the electrolyte dynamics is accounted for by a simple correction term.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
A Single Particle Model with Electrolyte and Side Reactions for degradation of lithium-ion batteries
Authors:
Ferran Brosa Planella,
W. Dhammika Widanage
Abstract:
Battery degradation, which is the reduction of performance over time, is one of the main roadblocks to the wide deployment of lithium-ion batteries. Physics-based models, such as those based on the Doyle-Fuller-Newman model, are invaluable tools to understand and predict such phenomena. However, these models are often too complex for practical applications, so reduced models are needed. In this ar…
▽ More
Battery degradation, which is the reduction of performance over time, is one of the main roadblocks to the wide deployment of lithium-ion batteries. Physics-based models, such as those based on the Doyle-Fuller-Newman model, are invaluable tools to understand and predict such phenomena. However, these models are often too complex for practical applications, so reduced models are needed. In this article we introduce the Single Particle Model with electrolyte and Side Reactions, a reduced model with electrochemical degradation which has been formally derived from the Doyle-Fuller-Newman model with Side Reactions using asymptotic methods. The reduced model has been validated against the full model for three scenarios (solid-electrolyte interphase growth, lithium plating, and both effects combined) showing similar accuracy at a much lower computational cost. The implications of the results are twofold: the reduced model is simple and accurate enough to be used in most real practical applications, and the reduction framework used is robust so it can be extended to account for further degradation effects.
△ Less
Submitted 5 June, 2023; v1 submitted 10 June, 2022;
originally announced June 2022.
-
A Continuum of Physics-Based Lithium-Ion Battery Models Reviewed
Authors:
Ferran Brosa Planella,
Weilong Ai,
Adam M. Boyce,
Abir Ghosh,
Ivan Korotkin,
Smita Sahu,
Valentin Sulzer,
Robert Timms,
Thomas G. Tranter,
Maxim Zyskin,
Samuel J. Cooper,
Jacqueline S. Edge,
Jamie M. Foster,
Monica Marinescu,
Billy Wu,
Giles Richardson
Abstract:
Physics-based electrochemical battery models derived from porous electrode theory are a very powerful tool for understanding lithium-ion batteries, as well as for improving their design and management. Different model fidelity, and thus model complexity, is needed for different applications. For example, in battery design we can afford longer computational times and the use of powerful computers,…
▽ More
Physics-based electrochemical battery models derived from porous electrode theory are a very powerful tool for understanding lithium-ion batteries, as well as for improving their design and management. Different model fidelity, and thus model complexity, is needed for different applications. For example, in battery design we can afford longer computational times and the use of powerful computers, while for real-time battery control (e.g. in electric vehicles) we need to perform very fast calculations using simple devices. For this reason, simplified models that retain most of the features at a lower computational cost are widely used. Even though in the literature we often find these simplified models posed independently, leading to inconsistencies between models, they can actually be derived from more complicated models using a unified and systematic framework. In this review, we showcase this reductive framework, starting from a high-fidelity microscale model and reducing it all the way down to the Single Particle Model (SPM), deriving in the process other common models, such as the Doyle-Fuller-Newman (DFN) model. We also provide a critical discussion on the advantages and shortcomings of each of the models, which can aid model selection for a particular application. Finally, we provide an overview of possible extensions to the models, with a special focus on thermal models. Any of these extensions could be incorporated into the microscale model and the reductive framework re-applied to lead to a new generation of simplified, multi-physics models.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
"Knees" in lithium-ion battery aging trajectories
Authors:
Peter M. Attia,
Alexander Bills,
Ferran Brosa Planella,
Philipp Dechent,
Gonçalo dos Reis,
Matthieu Dubarry,
Paul Gasper,
Richard Gilchrist,
Samuel Greenbank,
David Howey,
Ouyang Liu,
Edwin Khoo,
Yuliya Preger,
Abhishek Soni,
Shashank Sripad,
Anna G. Stefanopoulou,
Valentin Sulzer
Abstract:
Lithium-ion batteries can last many years but sometimes exhibit rapid, nonlinear degradation that severely limits battery lifetime. In this work, we review prior work on "knees" in lithium-ion battery aging trajectories. We first review definitions for knees and three classes of "internal state trajectories" (termed snowball, hidden, and threshold trajectories) that can cause a knee. We then discu…
▽ More
Lithium-ion batteries can last many years but sometimes exhibit rapid, nonlinear degradation that severely limits battery lifetime. In this work, we review prior work on "knees" in lithium-ion battery aging trajectories. We first review definitions for knees and three classes of "internal state trajectories" (termed snowball, hidden, and threshold trajectories) that can cause a knee. We then discuss six knee "pathways", including lithium plating, electrode saturation, resistance growth, electrolyte and additive depletion, percolation-limited connectivity, and mechanical deformation -- some of which have internal state trajectories with signals that are electrochemically undetectable. We also identify key design and usage sensitivities for knees. Finally, we discuss challenges and opportunities for knee modeling and prediction. Our findings illustrate the complexity and subtlety of lithium-ion battery degradation and can aid both academic and industrial efforts to improve battery lifetime.
△ Less
Submitted 8 January, 2022;
originally announced January 2022.
-
Parameterising continuum level Li-ion battery models & the LiionDB database
Authors:
A. A. Wang,
S. E. J. O'Kane,
F. Brosa Planella,
J. Le Houx,
K. O'Regan,
M. Zyskin,
J. Edge,
C. W. Monroe,
S. J. Cooper,
D. A. Howey,
E. Kendrick,
J. M. Foster
Abstract:
The Doyle-Fuller-Newman framework is the most popular physics-based continuum-level description of the chemical and dynamical internal processes within operating lithium-ion-battery cells. With sufficient flexibility to model a wide range of battery designs and chemistries, the framework provides an effective balance between detail, needed to capture key microscopic mechanisms, and simplicity, nee…
▽ More
The Doyle-Fuller-Newman framework is the most popular physics-based continuum-level description of the chemical and dynamical internal processes within operating lithium-ion-battery cells. With sufficient flexibility to model a wide range of battery designs and chemistries, the framework provides an effective balance between detail, needed to capture key microscopic mechanisms, and simplicity, needed to solve the governing equations at a relatively modest computational expense. Nevertheless, implementation requires values of numerous model parameters, whose ranges of applicability, estimation, and validation pose challenges. This article provides a critical review of the methods to measure or infer parameters for use within the isothermal DFN framework, discusses their advantages or disadvantages, and clarifies limitations attached to their practical application. Accompanying this discussion we provide a searchable database, available at www.liiondb.com, which aggregates many parameters and state functions for the standard Doyle-Fuller-Newman model that have been reported in the literature.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Systematic derivation and validation of a reduced thermal-electrochemical model for lithium-ion batteries using asymptotic methods
Authors:
Ferran Brosa Planella,
Muhammad Sheikh,
W. Dhammika Widanage
Abstract:
The widely used Doyler-Fuller-Newman (DFN) model for lithium-ion batteries is too computationally expensive for certain applications, which has motivated the appearance of a plethora of simpler models. These models are usually posed in an ad hoc manner, leading to inconsistencies with the DFN model and to multiple formulations of the same model, with the Single Particle Model (SPM) being a very go…
▽ More
The widely used Doyler-Fuller-Newman (DFN) model for lithium-ion batteries is too computationally expensive for certain applications, which has motivated the appearance of a plethora of simpler models. These models are usually posed in an ad hoc manner, leading to inconsistencies with the DFN model and to multiple formulations of the same model, with the Single Particle Model (SPM) being a very good example of the latter. In this work, we discuss the concept of SPM-type models showing that, despite the multiple formulations found in the literature, these models always follow the same structure, and we extend this discussion to models accounting for thermal effects. Then, we present a Thermal Single Particle Model with electrolyte (TSPMe) derived in a systematic manner using asymptotic techniques. The validation of the TSPMe against a thermal DFN model shows very high accuracy with a computational cost over forty times smaller. The comparison against experimental data shows that the model does a reasonable job predicting the behaviour of a real battery, but a very good parameter set is required to obtain accurate predictions.
△ Less
Submitted 30 April, 2021; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Human towers or castells modelling. 158th European Study Groups with Industry (long report)
Authors:
J. Antunes,
F. Brosa Planella,
A. Dòria-Cerezo,
A. March San José,
M. Pellicer,
A. Rodríguez-Ferran,
J. Saludes
Abstract:
Human towers or castells are human structures played in festivals mainly in Catalonia. These unique cultural and traditional displays have become very popular in the last years, but they date from the XVIII century. On 2010 they became part of the Unesco Representative List of the Intangible Cultural Heritage of Humanity.
Safety is very important in the performance of castells. To this end, it i…
▽ More
Human towers or castells are human structures played in festivals mainly in Catalonia. These unique cultural and traditional displays have become very popular in the last years, but they date from the XVIII century. On 2010 they became part of the Unesco Representative List of the Intangible Cultural Heritage of Humanity.
Safety is very important in the performance of castells. To this end, it is crucial to understand the mechanisms that allow a castell to be built and, more importantly, the factors that may cause its collapse. This work is focused on the mechanical aspects that make a pilar (the simplest structure in the castells) to stand. We suggest three different but complementary approaches for the running stage of a pilar (stage where it has been built and has not yet collapsed): the $N$-link pendulum as a first dynamical model, the response of the castellers as a control problem, and a static analysis to capture the feasibility of a given configuration. We include some preliminary simulations to better understand the previous approaches, which seem to match with qualitative perceptions that castellers have of a castell. Possible future developments are also discussed. To our knowledge, this work represents the first one to study the castells from a mechanical point of view.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
Derivation of an Effective Thermal Electrochemical Model for Porous Electrode Batteries using Asymptotic Homogenisation
Authors:
Matthew J. Hunt,
Ferran Brosa Planella,
Florian Theil,
W. Dhammika Widanage
Abstract:
Thermal electrochemical models for porous electrode batteries (such as lithium ion batteries) are widely used. Due to the multiple scales involved, solving the model accounting for the porous microstructure is computationally expensive, therefore effective models at the macroscale are preferable. However, these effective models are usually postulated ad hoc rather than systematically upscaled from…
▽ More
Thermal electrochemical models for porous electrode batteries (such as lithium ion batteries) are widely used. Due to the multiple scales involved, solving the model accounting for the porous microstructure is computationally expensive, therefore effective models at the macroscale are preferable. However, these effective models are usually postulated ad hoc rather than systematically upscaled from the microscale equations. We present an effective thermal electrochemical model obtained using asymptotic homogenisation, which includes the electrochemical model at the cell level coupled with a thermal model that can be defined either at the cell or the battery level. The main aspects of the model are the consideration of thermal effects, the diffusion effects in the electrode particles, and the anisotropy of the material based on the microstructure, all of them incorporated in a systematic manner. We also compare the homogenised model with the standard electrochemical Doyle, Fuller & Newman model.
△ Less
Submitted 16 March, 2020; v1 submitted 1 November, 2019;
originally announced November 2019.
-
Chaotic dynamics in the planar gravitational many-body problem with rigid body rotations
Authors:
James A. Kwiecinski,
Attila Kovacs,
Andrew L. Krause,
Ferran Brosa Planella,
Robert A. Van Gorder
Abstract:
The discovery of Pluto's small moons in the last decade brought attention to the dynamics of the dwarf planet's satellites. With such systems in mind, we study a planar $N$-body system in which all the bodies are point masses, except for a single rigid body. We then present a reduced model consisting of a planar $N$-body problem with the rigid body treated as a 1D continuum (i.e. the body is treat…
▽ More
The discovery of Pluto's small moons in the last decade brought attention to the dynamics of the dwarf planet's satellites. With such systems in mind, we study a planar $N$-body system in which all the bodies are point masses, except for a single rigid body. We then present a reduced model consisting of a planar $N$-body problem with the rigid body treated as a 1D continuum (i.e. the body is treated as a rod with an arbitrary mass distribution). Such a model provides a good approximation to highly asymmetric geometries, such as the recently observed interstellar asteroid 'Oumuamua, but is also amenable to analysis. We analytically demonstrate the existence of homoclinic chaos in the case where one of the orbits is nearly circular by way of the Melnikov method, and give numerical evidence for chaos when the orbits are more complicated. We show that the extent of chaos in parameter space is strongly tied to the deviations from a purely circular orbit. These results suggest that chaos is ubiquitous in many-body problems when one or more of the rigid bodies exhibits non-spherical and highly asymmetric geometries. The excitation of chaotic rotations does not appear to require tidal dissipation, obliquity variation, or orbital resonance. Such dynamics give a possible explanation for routes to chaotic dynamics observed in $N$-body systems such as the Pluto system where some of the bodies are highly non-spherical.
△ Less
Submitted 29 May, 2018; v1 submitted 3 January, 2018;
originally announced January 2018.
-
Coupled complex Ginzburg-Landau systems with saturable nonlinearity and asymmetric cross-phase modulation
Authors:
Robert A. Van Gorder,
Andrew L. Krause,
Ferran Brosa Planella,
Abigail M. Burton
Abstract:
We formulate and study dynamics from a complex Ginzburg-Landau system with saturable nonlinearity, including asymmetric cross-phase modulation (XPM) parameters. Such equations can model phenomena described by complex Ginzburg-Landau systems under the added assumption of saturable media. When the saturation parameter is set to zero, we recover a general complex cubic Ginzburg-Landau system with XPM…
▽ More
We formulate and study dynamics from a complex Ginzburg-Landau system with saturable nonlinearity, including asymmetric cross-phase modulation (XPM) parameters. Such equations can model phenomena described by complex Ginzburg-Landau systems under the added assumption of saturable media. When the saturation parameter is set to zero, we recover a general complex cubic Ginzburg-Landau system with XPM. We first derive conditions for the existence of bounded dynamics, approximating the absorbing set for solutions. We use this to then determine conditions for amplitude death of a single wavefunction. We also construct exact plane wave solutions, and determine conditions for their modulational instability. In a degenerate limit where dispersion and nonlinearity balance, we reduce our system to a saturable nonlinear Schrödinger system with XPM parameters, and we demonstrate the existence and behavior of spatially heterogeneous stationary solutions in this limit. Using numerical simulations we verify the aforementioned analytical results, while also demonstrating other interesting emergent features of the dynamics, such as spatiotemporal chaos in the presence of modulational instability. In other regimes, coherent patterns including uniform states or banded structures arise, corresponding to certain stable stationary states. For sufficiently large yet equal XPM parameters, we observe a segregation of wavefunctions into different regions of the spatial domain, while when XPM parameters are large and take different values, one wavefunction may decay to zero in finite time over the spatial domain (in agreement with the amplitude death predicted analytically). While saturation will often regularize the dynamics, such transient dynamics can still be observed - and in some cases even prolonged - as the saturability of the media is increased, as the saturation may act to slow the timescale.
△ Less
Submitted 17 June, 2018; v1 submitted 22 October, 2017;
originally announced October 2017.