-
Marangoni instability in oblate droplets suspended on a circular frame
Authors:
M. A. Shishkin,
K. S. Kolegov,
S. A. Pikin,
B. I. Ostrovskii,
E. S. Pikina
Abstract:
We study theoretically internal flows in a small oblate droplet suspended on the circular frame. Marangoni convection arises due to a vertical temperature gradient across the drop and is driven by the surface tension variations at the free drop interface. Using the analytical basis for the solutions of Stokes equation in coordinates of oblate spheroid we have derived the linearly independent stati…
▽ More
We study theoretically internal flows in a small oblate droplet suspended on the circular frame. Marangoni convection arises due to a vertical temperature gradient across the drop and is driven by the surface tension variations at the free drop interface. Using the analytical basis for the solutions of Stokes equation in coordinates of oblate spheroid we have derived the linearly independent stationary solutions for Marangoni convection in terms of Stokes stream functions. The numerical simulations of the thermocapillary motion in the drops are used to study the onset of the stationary regime. Both analytical and numerical calculations predict the axially-symmetric circulatory convection motion in the drop, the dynamics of which is determined by the magnitude of the temperature gradient across the drop. The analytical solutions for the critical temperature distribution and velocity fields are obtained for the large temperature gradients across the oblate drop. These solutions reveal the lateral separation of the critical and stationary motions within the drops. The critical vortices are localized near the central part of a drop, while the intensive stationary flow is located closer to its butt end. A crossover to the limit of the plane film is studied within the formalism of the stream functions by reducing the droplet ellipticity ratio to zero value. The initial stationary regime for the strongly oblate drops becomes unstable relative to the many-vortex perturbations in analogy with the plane fluid films with free boundaries.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Circulating Marangoni flows within droplets in smectic films
Authors:
E. S. Pikina,
M. A. Shishkin,
K. S. Kolegov,
B. I. Ostrovskii,
S. A. Pikin
Abstract:
We present theoretical study and numerical simulation of Marangoni convection within ellipsoidal isotropic droplets embedded in free standing smectic films (FSSF). The thermocapillary flows are analyzed for both isotropic droplets spontaneously formed in FSSF overheated above the bulk smectic-isotropic transition, and oil lenses deposited on the surface of the smectic film. The realistic model, fo…
▽ More
We present theoretical study and numerical simulation of Marangoni convection within ellipsoidal isotropic droplets embedded in free standing smectic films (FSSF). The thermocapillary flows are analyzed for both isotropic droplets spontaneously formed in FSSF overheated above the bulk smectic-isotropic transition, and oil lenses deposited on the surface of the smectic film. The realistic model, for which the upper drop interface is free from the smectic layers, while at the lower drop surface the smectic layering still persists is considered in detail. For isotropic droplets and oil lenses this leads effectively to a sticking of fluid motion at the border with a smectic shell. The above mentioned asymmetric configuration is realized experimentally when the temperature of the upper side of the film is higher than at the lower one. The full set of stationary solutions for Stokes stream functions describing the Marangoni convection flows within the ellipsoidal drops were derived analytically. The temperature distribution in the ellipsoidal drop and the surrounding air was determined in the frames of the perturbation theory. As a result the analytical solutions for the stationary thermocapillary convection were derived for different droplet ellipticity ratios and the heat conductivity of the liquid crystal and air. In parallel, the numerical hydrodynamic calculations of the thermocapillary motion in the drops were performed. Both the analytical and numerical simulations predict the axially-symmetric circulatory convection motion determined by the Marangoni effect at the droplet free surface. Due to a curvature of the drop interface a temperature gradient along its free surface always persists. Thus, the thermocapillary convection within the ellipsoidal droplets in overheated FSSF is possible for the arbitrarily small Marangoni numbers.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Enhanced Polarization of Low Pressure $^3$He through Metastability-Exchange Optical Pum** at High Field
Authors:
J. D. Maxwell,
J. Alessi,
G. Atoian,
E. Beebe,
C. S. Epstein,
R. G. Milner,
M. Musgrave,
A. Pikin,
J. Ritter,
A. Zelenski
Abstract:
We report high steady-state nuclear polarization of 1 torr $^3$He gas nuclei via metastability-exchange optical pum** at magnetic fields above 2 T. The introduction of highly polarized $^3$He gas into Brookhaven's Electron Beam Ion Source would enable a new, polarized $^3$He ion source for use at the Relativistic Heavy Ion Collider and a future Electron-Ion Collider facility. By adapting recent…
▽ More
We report high steady-state nuclear polarization of 1 torr $^3$He gas nuclei via metastability-exchange optical pum** at magnetic fields above 2 T. The introduction of highly polarized $^3$He gas into Brookhaven's Electron Beam Ion Source would enable a new, polarized $^3$He ion source for use at the Relativistic Heavy Ion Collider and a future Electron-Ion Collider facility. By adapting recent developments in high field metastability-exchange optical pum** for higher pressure gas, we have successfully polarized 1 torr $^3$He sealed cells in the EBIS solenoid. Through careful manipulation of the RF discharge parameters, polarizations above 80% were attained at 2, 3 and 4 T, with 89% being reached at 3 T with a 664 s relaxation time.
△ Less
Submitted 11 April, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Conceptual design report on a charge breeder for HIE-ISOLDE
Authors:
Andrey Shornikov,
Edward Beebe,
Martin Breitenfeldt,
Johanna Pitters,
Robert Mertzig,
Alexander Pikin,
Fredrik Wenander
Abstract:
In this conceptual design report the possible options for an upgrade of the REX/HIE-ISOLDE charge breeder are discussed. The performance requirements imposed by standard HIE-ISOLDE physics as well as injection into a possible future TSR@ISOLDE are discussed, and thereafter translated into machine parameters. Experimental results from tests of a high-current and high-density electron gun performed…
▽ More
In this conceptual design report the possible options for an upgrade of the REX/HIE-ISOLDE charge breeder are discussed. The performance requirements imposed by standard HIE-ISOLDE physics as well as injection into a possible future TSR@ISOLDE are discussed, and thereafter translated into machine parameters. Experimental results from tests of a high-current and high-density electron gun performed at Brookhaven National Laboratory are presented, and alternative gun designs are discussed. Finally, a cost estimate is given together with possible beneficiaries of the on-going R&D, and potential collaboration partners are identified.
△ Less
Submitted 3 January, 2017;
originally announced January 2017.
-
High energy Coulomb-scattered electrons for relativistic particle beam diagnostics
Authors:
P. Thieberger,
Z. Altinbas,
C. Carlson,
C. Chasman,
M. Costanzo,
C. Degen,
K. A. Drees,
W. Fischer,
D. Gassner,
X. Gu,
K. Hamdi,
J. Hock,
A. Marusic,
T. Miller,
M. Minty,
C. Montag,
Y. Luo,
A. I. Pikin,
S. M. White
Abstract:
A new system used for monitoring energetic Coulomb-scattered electrons as the main diagnostic for accurately aligning the electron and ion beams in the new Relativistic Heavy Ion Collider (RHIC) electron lenses is described in detail. The theory of electron scattering from relativistic ions is developed and applied to the design and implementation of the system used to achieve and maintain the ali…
▽ More
A new system used for monitoring energetic Coulomb-scattered electrons as the main diagnostic for accurately aligning the electron and ion beams in the new Relativistic Heavy Ion Collider (RHIC) electron lenses is described in detail. The theory of electron scattering from relativistic ions is developed and applied to the design and implementation of the system used to achieve and maintain the alignment. Commissioning with gold and 3He beams is then described as well as the successful utilization of the new system during the 2015 RHIC polarized proton run. Systematic errors of the new method are then estimated. Finally, some possible future applications of Coulomb-scattered electrons for beam diagnostics are briefly discussed.
△ Less
Submitted 24 March, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
Six-dimensional weak-strong simulations of head-on beam-beam compensation in RHIC
Authors:
Y. Luo,
W. Fischer,
N. P. Abreu,
X. Gu,
A. Pikin,
G. Robert-Demolaize
Abstract:
To compensate the large beam-beam tune spread and beam-beam resonance driving terms in the polarized proton operation in the Relativistic Heavy Ion Collider (RHIC), we will introduce a low-energy DC electron beam into each ring to collide head-on with the opposing proton beam. The device to provide the electron beam is called an electron lens. In this article, using a 6-D weak-strong-beam-beam int…
▽ More
To compensate the large beam-beam tune spread and beam-beam resonance driving terms in the polarized proton operation in the Relativistic Heavy Ion Collider (RHIC), we will introduce a low-energy DC electron beam into each ring to collide head-on with the opposing proton beam. The device to provide the electron beam is called an electron lens. In this article, using a 6-D weak-strong-beam-beam interaction simulation model, we investigate the effects of head-on beam-beam compensation with electron lenses on the proton beam dynamics in the RHIC 250 GeV polarized proton operation. This article is abridged from the published article [1].
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Status of head-on beam-beam compensation in RHIC
Authors:
W. Fischer,
Z. Altinbas,
M. Anerella,
M. Blaskiewicz,
D. Bruno,
M. Costanzo,
W. C. Dawson,
D. M. Gassner,
X. Gu,
R. C. Gupta,
K. Hamdi,
J. Hock,
L. T. Hoff,
R. Hulsart,
A. K. Jain,
R. Lambiase,
Y. Luo,
M. Mapes,
A. Marone,
R. Michnoff,
T. A. Miller,
M. Minty,
C. Montag,
J. Muratore,
S. Nemesure
, et al. (12 additional authors not shown)
Abstract:
In polarized proton operation, the performance of the Relativistic Heavy Ion Collider (RHIC) is limited by the head-on beam-beam effect. To overcome this limitation, two electron lenses are under commissioning. We give an overview of head-on beam-beam compensation in general and in the specific design for RHIC, which is based on electron lenses. The status of installation and commissioning are pre…
▽ More
In polarized proton operation, the performance of the Relativistic Heavy Ion Collider (RHIC) is limited by the head-on beam-beam effect. To overcome this limitation, two electron lenses are under commissioning. We give an overview of head-on beam-beam compensation in general and in the specific design for RHIC, which is based on electron lenses. The status of installation and commissioning are presented along with plans for the future.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications
Authors:
Andrey Shornikov,
Edward N. Beebe,
Robert C. Mertzig,
Alexander Pikin,
Fredrik J. C. Wenander
Abstract:
We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, th…
▽ More
We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2-3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5-1 Hz is between 10 and 20 kA/cm2, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed electron beam of 1.5 A and 30 keV was demonstrated in a joint experiment with BNL [2]. In addition, we report on further development aiming to achieve CW operation of an electron beam having a geometrical transverse ion-acceptance matching the injection of 1+ ions (11.5 μm), and an emittance/energy spread of the extracted ion beam matching the downstream mass separator and RFQ (0.08 μm normalized / +/- 1% ).
△ Less
Submitted 9 September, 2014;
originally announced September 2014.
-
High-energy high-luminosity electron-ion collider eRHIC
Authors:
Vladimir N. Litvinenko,
Joanne Beebe-Wang,
Sergei Belomestnykh,
Ilan Ben-Zvi,
Michael M. Blaskiewicz,
Rama Calaga,
Xiangyun Chang,
Alexei Fedotov,
David Gassner,
Lee Hammons,
Harald Hahn,
Yue Hao,
** He,
William Jackson,
Animesh Jain,
Elliott C. Johnson,
Dmitry Kayran,
Jrg Kewisch,
Yun Luo,
George Mahler,
Gary McIntyre,
Wuzheng Meng,
Michiko Minty,
Brett Parker,
Alexander Pikin
, et al. (17 additional authors not shown)
Abstract:
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity.
△ Less
Submitted 13 September, 2011;
originally announced September 2011.
-
Gluons and the quark sea at high energies: distributions, polarization, tomography
Authors:
D. Boer,
M. Diehl,
R. Milner,
R. Venugopalan,
W. Vogelsang,
A. Accardi,
E. Aschenauer,
M. Burkardt,
R. Ent,
V. Guzey,
D. Hasch,
K. Kumar,
M. A. C. Lamont,
Y. Li,
W. J. Marciano,
C. Marquet,
F. Sabatie,
M. Stratmann,
F. Yuan,
S. Abeyratne,
S. Ahmed,
C. Aidala,
S. Alekhin,
M. Anselmino,
H. Avakian
, et al. (164 additional authors not shown)
Abstract:
This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei…
▽ More
This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei at high energies, offering unprecedented possibilities for in-depth studies of quantum chromodynamics. This report is organized around four major themes: i) the spin and flavor structure of the proton, ii) three-dimensional structure of nucleons and nuclei in momentum and configuration space, iii) QCD matter in nuclei, and iv) Electroweak physics and the search for physics beyond the Standard Model. Beginning with an executive summary, the report contains tables of key measurements, chapter overviews for each of the major scientific themes, and detailed individual contributions on various aspects of the scientific opportunities presented by an EIC.
△ Less
Submitted 28 November, 2011; v1 submitted 5 August, 2011;
originally announced August 2011.