Showing 1–28 of 28 results for author: Piemonte, C

SiPM Signal Processing via Multiple Linear Regression

Authors: Wolfgang Schmailzl, Claudio Piemonte, Erika Garutti, Walter Hansch

Abstract: This paper presents a novel approach using multiple linear regression to process transient signals from silicon photomultipliers. The method provides excellent noise suppression and pulse detection in scenarios with a high pulse count rate and superimposed pulses. Insights into its implementation and benchmark results are presented. We also show how this approach can be used to automatically detec… ▽ More This paper presents a novel approach using multiple linear regression to process transient signals from silicon photomultipliers. The method provides excellent noise suppression and pulse detection in scenarios with a high pulse count rate and superimposed pulses. Insights into its implementation and benchmark results are presented. We also show how this approach can be used to automatically detect the pulse shape from a given transient signal, providing good detection for count rates up to 90MHz. Experimental data are used to present an application where this algorithm improves charge spectrum resolution by an order of magnitude. △ Less

Submitted 24 April, 2023; originally announced April 2023.

X-Ray Silicon Drift Detector-CMOS Front-End System with High Energy Resolution at Room Temperature

Authors: G. Bertuccio, M. Ahangarianabhari, C. Graziani, D. Macera, Y. Shi, M. Gandola, A. Rachevski, I. Rashevskaya, A. Vacchi, G. Zampa, N. Zampa, P. Bellutti, G. Giacomini, A. Picciotto, C. Piemonte, N. Zorzi

Abstract: We present a spectroscopic system constituted by a Silicon Drift Detector (SDD) coupled to a CMOS charge sensitive preamplifier, named SIRIO, specifically designed to reach ultimate low noise levels. The SDD, with an active area of 13 mm , has been manufactured by optimizing the production processes in order to reduce the anode current, successfully reaching current densities between 17 pA/cm and… ▽ More We present a spectroscopic system constituted by a Silicon Drift Detector (SDD) coupled to a CMOS charge sensitive preamplifier, named SIRIO, specifically designed to reach ultimate low noise levels. The SDD, with an active area of 13 mm , has been manufactured by optimizing the production processes in order to reduce the anode current, successfully reaching current densities between 17 pA/cm and 25 pA/cm at 20 for drift fields ranging from 100 V/cm to 500 V/cm. The preamplifier shows minimum intrinsic noise levels of 1.27 and 1.0 electrons r.m.s. at 20 and 30 , respectively. At room temperature ( ) the 5.9 keV and the pulser lines have 136 eV and 64 eV FWHM, respectively, corresponding to an equivalent noise charge of 7.4 electrons r.m.s.; the noise threshold is at 165 eV. The energy resolution, as measured on the pulser line, ranges from 82 eV FWHM (9.4 electrons r.m.s.) at 30C down to 29 eV FWHM (3.3 electrons r.m.s.) at 30C . △ Less

Submitted 5 January, 2022; originally announced January 2022.

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 63, NO. 1, FEBRUARY 2016, pp. 400-406

Design and construction of a new detector to measure ultra-low radioactive-isotope contamination of argon

Authors: The DarkSide Collaboration, C. E. Aalseth, S. Abdelhakim, F. Acerbi, P. Agnes, R. Ajaj, I. F. M. Albuquerque, T. Alexander, A. Alici, A. K. Alton, P. Amaudruz, F. Ameli, J. Anstey, P. Antonioli, M. Arba, S. Arcelli, R. Ardito, I. J. Arnquist, P. Arpaia, D. M. Asner, A. Asunskis, M. Ave, H. O. Back, A. Barrado Olmedo, G. Batignani , et al. (306 additional authors not shown)

Abstract: Large liquid argon detectors offer one of the best avenues for the detection of galactic weakly interacting massive particles (WIMPs) via their scattering on atomic nuclei. The liquid argon target allows exquisite discrimination between nuclear and electron recoil signals via pulse-shape discrimination of the scintillation signals. Atmospheric argon (AAr), however, has a naturally occurring radioa… ▽ More Large liquid argon detectors offer one of the best avenues for the detection of galactic weakly interacting massive particles (WIMPs) via their scattering on atomic nuclei. The liquid argon target allows exquisite discrimination between nuclear and electron recoil signals via pulse-shape discrimination of the scintillation signals. Atmospheric argon (AAr), however, has a naturally occurring radioactive isotope, $^{39}$Ar, a $β$ emitter of cosmogenic origin. For large detectors, the atmospheric $^{39}$Ar activity poses pile-up concerns. The use of argon extracted from underground wells, deprived of $^{39}$Ar, is key to the physics potential of these experiments. The DarkSide-20k dark matter search experiment will operate a dual-phase time projection chamber with 50 tonnes of radio-pure underground argon (UAr), that was shown to be depleted of $^{39}$Ar with respect to AAr by a factor larger than 1400. Assessing the $^{39}$Ar content of the UAr during extraction is crucial for the success of DarkSide-20k, as well as for future experiments of the Global Argon Dark Matter Collaboration (GADMC). This will be carried out by the DArT in ArDM experiment, a small chamber made with extremely radio-pure materials that will be placed at the centre of the ArDM detector, in the Canfranc Underground Laboratory (LSC) in Spain. The ArDM LAr volume acts as an active veto for background radioactivity, mostly $γ$-rays from the ArDM detector materials and the surrounding rock. This article describes the DArT in ArDM project, including the chamber design and construction, and reviews the background required to achieve the expected performance of the detector. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Comments: 13 pages, 8 figures. Corresponding author: E. Sánchez García

Polysiloxane-based scintillators for shashlik calorimeters

Authors: F. Acerbi, A. Branca, C. Brizzolari, G. Brunetti, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, A. Gola, C. Jollet, B. Kliček, Y. Kudenko, M. Laveder, A. Longhin, L. Ludovici, E. Lutsenko, L. Magaletti, G. Mandrioli, T. Marchi, A. Margotti , et al. (24 additional authors not shown)

Abstract: We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a $\sim$6$\times$6$\times$45 cm$^3$ (13 $X_0$ depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density… ▽ More We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a $\sim$6$\times$6$\times$45 cm$^3$ (13 $X_0$ depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density of about one over cm$^2$. Unlike shashlik calorimeters based on plastic organic scintillators, here fibers are optically matched with the scintillator without any intermediate air gap. The prototype features a compact light readout based on Silicon Photo-Multipliers embedded in the bulk of the detector. The detector was tested with electrons, pions and muons with energies ranging from 1 to 7 GeV at the CERN-PS. This solution offers a highly radiation hard detector to instrument the decay region of a neutrino beam, providing an event-by-event measurement of high-angle decay products associated with neutrino production (ENUBET, Enhanced NeUtrino BEams from kaon Tagging, ERC project). The results in terms of light yield, uniformity and energy resolution, are compared to a similar calorimeter built with ordinary plastic scintillators. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 28 pages, 16 figures. To appear in NIM-A

Journal ref: Nuclear Instruments and Methods in Physics Research A 956 (2020) 163379

The ENUBET narrow band neutrino beam

Authors: ENUBET Collaboration, M. Tenti, F. Acerbi, G. Ballerini, M. Bonesini, C. Brizzolari, G. Brunetti M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, B. Goddard, A. Gola, R. A. Intonti, C. Jollet, V. Kain, B. Klicek, Y. Kudenko, M. Laveder, A. Longhin , et al. (32 additional authors not shown)

Abstract: The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully contr… ▽ More The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully controlled $ν_{e}$ source at the GeV scale for a new generation of short baseline experiments. In this contribution the performances of the positron tagger prototypes tested at CERN beamlines in 2016-2018 are presented. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Comments: Poster presented at NuPhys2018 (London 19-21 December 2018). 5 pages, 3 figures

Report number: NuPhys2018-Tenti

The ENUBET Beamline

Authors: ENUBET Collaboration, G. Brunetti, F. Acerbi, G. Ballerini, M. Bonesini, A. Branca, C. Brizzolari, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, B. Goddard, A. Gola, R. A. Intonti, C. Jollet, V. Kain, B. Klicek, Y. Kudenko , et al. (34 additional authors not shown)

Abstract: The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline… ▽ More The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline based on a dipole coupled to a pair of quadrupole triplets along with the optimisation guidelines and the results of a simulation based on G4beamline. A static focusing design, though less efficient than a horn-based solution, results several times more efficient than originally expected. It works with slow proton extractions reducing drastically pile-up effects in the decay tunnel and it paves the way towards a time-tagged neutrino beam. On the other hand a horn-based transferline would ensure higher yields at the tunnel entrance. The first studies conducted at CERN to implement the synchronization between a few ms proton extraction and a horn pulse of 2-10 ms are also described. △ Less

Submitted 26 November, 2020; v1 submitted 21 March, 2019; originally announced March 2019.

Comments: Poster presented at NuPhys2018 (London 19-21 December 2018). 4 pages, 3 figures

Report number: NuPhys2018-Brunetti

Irradiation and performance of RGB-HD Silicon Photomultipliers for calorimetric applications

Authors: F. Acerbi, G. Ballerini, A. Berra, C. Brizzolari, G. Brunetti, M. G. Catanesi, S. Cecchini, F. Cindolo, A. Coffani, G. Collazuol, E. Conti, F. Dal Corso, C. Delogu, G. De Rosa, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, A. Longhin, L. Ludovici, L. Magaletti, G. Mandrioli, A. Margotti, V. Mascagna, N. Mauri , et al. (19 additional authors not shown)

Abstract: Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were c… ▽ More Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were characterized on-site (dark current and photoelectron response) during and after irradiations at different fluences. The irradiated SiPMs were installed in the ENUBET compact calorimetric modules and characterized with muons and electrons at the CERN East Area facility. The tests demonstrate that both the electromagnetic response and the sensitivity to minimum ionizing particles are retained after irradiation. Gain compensation can be achieved increasing the bias voltage well within the operation range of the SiPMs. The sensitivity to single photoelectrons is lost at $\sim 10^{10}$ n/cm$^2$ due to the increase of the dark current. △ Less

Submitted 24 January, 2019; originally announced January 2019.

Comments: 14 pages, 13 figures. To appear in JINST

A high precision neutrino beam for a new generation of short baseline experiments

Authors: F. Acerbi, G. Ballerini, S. Bolognesi, M. Bonesini, C. Brizzolari, G. Brunetti, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, F. Di Lodovico, C. Delogu, A. Falcone, A. Gola, R. A. Intonti, C. Jollet, B. Klicek, Y. Kudenko, M. Laveder, A. Longhin, L. Ludovici , et al. (31 additional authors not shown)

Abstract: The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would impro… ▽ More The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would improve by about one order of magnitude the precision on $ν_μ$ and $ν_e$ cross sections, enable the study of electroweak nuclear physics at the GeV scale with unprecedented resolution and advance searches for physics beyond the three-neutrino paradigm. In turn, these results would enhance the physics reach of the next generation long baseline experiments (DUNE and Hyper-Kamiokande) on CP violation and their sensitivity to new physics. In this document, we present the physics case and technology challenge of high precision neutrino beams based on the results achieved by the ENUBET Collaboration in 2016-2018. We also set the R&D milestones to enable the construction and running of this new generation of experiments well before the start of the DUNE and Hyper-Kamiokande data taking. We discuss the implementation of this new facility at three different level of complexity: $ν_μ$ narrow band beams, $ν_e$ monitored beams and tagged neutrino beams. We also consider a site specific implementation based on the CERN-SPS proton driver providing a fully controlled neutrino source to the ProtoDUNE detectors at CERN. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Comments: 13 pages, 3 figures, submitted as an input document for the European Particle Physics Strategy. Dec. 2018

The enhanced X-ray Timing and Polarimetry mission - eXTP

Authors: ShuangNan Zhang, Andrea Santangelo, Marco Feroci, YuPeng Xu, FangJun Lu, Yong Chen, Hua Feng, Shu Zhang, Søren Brandt, Margarita Hernanz, Luca Baldini, Enrico Bozzo, Riccardo Campana, Alessandra De Rosa, YongWei Dong, Yuri Evangelista, Vladimir Karas, Norbert Meidinger, Aline Meuris, Kirpal Nandra, Teng Pan, Giovanni Pareschi, Piotr Orleanski, QiuShi Huang, Stephane Schanne , et al. (125 additional authors not shown)

Abstract: In this paper we present the enhanced X-ray Timing and Polarimetry mission - eXTP. eXTP is a space science mission designed to study fundamental physics under extreme conditions of density, gravity and magnetism. The mission aims at determining the equation of state of matter at supra-nuclear density, measuring effects of QED, and understanding the dynamics of matter in strong-field gravity. In ad… ▽ More In this paper we present the enhanced X-ray Timing and Polarimetry mission - eXTP. eXTP is a space science mission designed to study fundamental physics under extreme conditions of density, gravity and magnetism. The mission aims at determining the equation of state of matter at supra-nuclear density, measuring effects of QED, and understanding the dynamics of matter in strong-field gravity. In addition to investigating fundamental physics, eXTP will be a very powerful observatory for astrophysics that will provide observations of unprecedented quality on a variety of galactic and extragalactic objects. In particular, its wide field monitoring capabilities will be highly instrumental to detect the electro-magnetic counterparts of gravitational wave sources. The paper provides a detailed description of: (1) the technological and technical aspects, and the expected performance of the instruments of the scientific payload; (2) the elements and functions of the mission, from the spacecraft to the ground segment. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: Accepted for publication on Sci. China Phys. Mech. Astron. (2019)

Shashlik calorimeters: novel compact prototypes for the ENUBET experiment

Authors: M. Pari, G. Ballerini, A. Berra, R. Boanta, M. Bonesini, C. Brizzolari, G. Brunetti, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, A. Coffani, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, C. Delogu, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, M. Laveder, A. Longhin, P. F. Loverre , et al. (28 additional authors not shown)

Abstract: We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators. We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Comments: 4 pages, 1 figure, Conference proceeding of PM2018 - 14th Pisa Meeting on Advanced Detectors, from 27th May to 2nd June 2018, La Biodola, Isola D$'$Elba (Italy), To be published in: Nuclear Inst. and Methods in Physics Research, A

A narrow band neutrino beam with high precision flux measurements

Authors: A. Coffani, G. Ballerini, A. Berra, R. Boanta, M. Bonesini, C. Brizzolari, G. Brunetti, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, M. Laveder, A. Longhin, P. F. Loverre, L. Ludovici, L. Magaletti , et al. (27 additional authors not shown)

Abstract: The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the s… ▽ More The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the selection of the energy of the outcoming neutrinos. We report here the latest results in the development and test of the instrumentation for the decay tunnel. Special emphasis is given to irradiation tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the first application of polysiloxane-based scintillators in high energy physics. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Comments: Poster presented at NuPhys2017 (London, 20-22 December 2017). 5 pages, 2 figures

Report number: NuPhys2017-Coffani

Testbeam performance of a shashlik calorimeter with fine-grained longitudinal segmentation

Authors: G. Ballerini, A. Berra, R. Boanta, C. Brizzolari, G. Brunetti, M. G. Catanesi, S. Cecchini, F. Cindolo, A. Coffani, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, A. Gola, C. Jollet, A. Longhin, L. Ludovici, L. Magaletti, G. Mandrioli, A. Margotti, V. Mascagna, A. Meregaglia, M. Pari, L. Pasqualini, G. Paternoster , et al. (12 additional authors not shown)

Abstract: An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal… ▽ More An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal segmentation is achieved using a very compact light readout system developed by the SCENTT and ENUBET Collaborations, which is based on fiber-SiPM coupling boards embedded in the bulk of the detector. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Comments: 21 pages, 19 figures. To appear in JINST

DarkSide-20k: A 20 Tonne Two-Phase LAr TPC for Direct Dark Matter Detection at LNGS

Authors: C. E. Aalseth, F. Acerbi, P. Agnes, I. F. M. Albuquerque, T. Alexander, A. Alici, A. K. Alton, P. Antonioli, S. Arcelli, R. Ardito, I. J. Arnquist, D. M. Asner, M. Ave, H. O. Back, A. I. Barrado Olmedo, G. Batignani, E. Bertoldo, S. Bettarini, M. G. Bisogni, V. Bocci, A. Bondar, G. Bonfini, W. Bonivento, M. Bossa, B. Bottino , et al. (260 additional authors not shown)

Abstract: Building on the successful experience in operating the DarkSide-50 detector, the DarkSide Collaboration is going to construct DarkSide-20k, a direct WIMP search detector using a two-phase Liquid Argon Time Projection Chamber (LArTPC) with an active (fiducial) mass of 23 t (20 t). The DarkSide-20k LArTPC will be deployed within a shield/veto with a spherical Liquid Scintillator Veto (LSV) inside a… ▽ More Building on the successful experience in operating the DarkSide-50 detector, the DarkSide Collaboration is going to construct DarkSide-20k, a direct WIMP search detector using a two-phase Liquid Argon Time Projection Chamber (LArTPC) with an active (fiducial) mass of 23 t (20 t). The DarkSide-20k LArTPC will be deployed within a shield/veto with a spherical Liquid Scintillator Veto (LSV) inside a cylindrical Water Cherenkov Veto (WCV). Operation of DarkSide-50 demonstrated a major reduction in the dominant $^{39}$Ar background when using argon extracted from an underground source, before applying pulse shape analysis. Data from DarkSide-50, in combination with MC simulation and analytical modeling, shows that a rejection factor for discrimination between electron and nuclear recoils of $\gt3\times10^9$ is achievable. This, along with the use of the veto system, is the key to unlocking the path to large LArTPC detector masses, while maintaining an "instrumental background-free" experiment, an experiment in which less than 0.1 events (other than $ν$-induced nuclear recoils) is expected to occur within the WIMP search region during the planned exposure. DarkSide-20k will have ultra-low backgrounds than can be measured in situ. This will give sensitivity to WIMP-nucleon cross sections of $1.2\times10^{-47}$ cm$^2$ ($1.1\times10^{-46}$ cm$^2$) for WIMPs of $1$ TeV$/c^2$ ($10$ TeV$/c^2$) mass, to be achieved during a 5 yr run producing an exposure of 100 t yr free from any instrumental background. DarkSide-20k could then extend its operation to a decade, increasing the exposure to 200 t yr, reaching a sensitivity of $7.4\times10^{-48}$ cm$^2$ ($6.9\times10^{-47}$ cm$^2$) for WIMPs of $1$ TeV$/c^2$ ($10$ TeV$/c^2$) mass. △ Less

Submitted 25 July, 2017; originally announced July 2017.

Report number: FERMILAB-PUB-17-298-PPD

Journal ref: Aalseth, C.E., Acerbi, F., Agnes, P. et al. Eur. Phys. J. Plus (2018) 133: 131

Cryogenic Characterization of FBK RGB-HD SiPMs

Authors: C. E. Aalseth, F. Acerbi, P. Agnes, I. F. M. Albuquerque, T. Alexander, A. Alici, A. K. Alton, P. Ampudia, P. Antonioli, S. Arcelli, R. Ardito, I. J. Arnquist, D. M. Asner, H. O. Back, G. Batignani, E. Bertoldo, S. Bettarini, M. G. Bisogni, V. Bocci, A. Bondar, G. Bonfini, W. Bonivento, M. Bossa, B. Bottino, R. Bunker , et al. (246 additional authors not shown)

Abstract: We report on the cryogenic characterization of Red Green Blue - High Density (RGB-HD) SiPMs developed at Fondazione Bruno Kessler (FBK) as part of the DarkSide program of dark matter searches with liquid argon time projection chambers. A dedicated setup was used to measure the primary dark noise, the correlated noise, and the gain of the SiPMs at varying temperatures. A custom-made data acquisitio… ▽ More We report on the cryogenic characterization of Red Green Blue - High Density (RGB-HD) SiPMs developed at Fondazione Bruno Kessler (FBK) as part of the DarkSide program of dark matter searches with liquid argon time projection chambers. A dedicated setup was used to measure the primary dark noise, the correlated noise, and the gain of the SiPMs at varying temperatures. A custom-made data acquisition system and analysis software were used to precisely characterize these parameters. We demonstrate that FBK RGB-HD SiPMs with low quenching resistance (RGB-HD-LR$_q$) can be operated from 40 K to 300 K with gains in the range $10^5$ to $10^6$ and noise rates on the order of a few Hz/mm$^2$. △ Less

Submitted 12 September, 2017; v1 submitted 19 May, 2017; originally announced May 2017.

A compact and modular X and gamma-ray detector with a CsI scintillator and double-readout Silicon Drift Detectors

Authors: R. Campana, F. Fuschino, C. Labanti, M. Marisaldi, L. Amati, M. Fiorini, M. Uslenghi, G. Baldazzi, P. Bellutti, Y. Evangelista, I. Elmi, M. Feroci, F. Ficorella, F. Frontera, A. Picciotto, C. Piemonte, A. Rachevski, I. Rashevskaya, L. P. Rignanese, A. Vacchi, G. Zampa, N. Zampa, N. Zorzi

Abstract: A future compact and modular X and gamma-ray spectrometer (XGS) has been designed and a series of prototypes have been developed and tested. The experiment envisages the use of CsI scintillator bars read out at both ends by single-cell 25 mm2 Silicon Drift Detectors. Digital algorithms are used to discriminate between events absorbed in the Silicon layer (lower energy X rays) and events absorbed i… ▽ More A future compact and modular X and gamma-ray spectrometer (XGS) has been designed and a series of prototypes have been developed and tested. The experiment envisages the use of CsI scintillator bars read out at both ends by single-cell 25 mm2 Silicon Drift Detectors. Digital algorithms are used to discriminate between events absorbed in the Silicon layer (lower energy X rays) and events absorbed in the scintillator crystal (higher energy X rays and gamma-rays). The prototype characterization is shown and the modular design for future experiments with possible astrophysical applications (e.g. for the THESEUS mission proposed for the ESA M5 call) are discussed. △ Less

Submitted 20 April, 2017; originally announced April 2017.

Comments: 10 pages, 11 figures. Published in Proceeding of SPIE Astronomical Telescopes and Instrumentation 2016

Journal ref: Proceedings of the SPIE, 9905, 99056I (2016)

Cryogenic Characterization of FBK HD Near-UV Sensitive SiPMs

Authors: Fabio Acerbi, Stefano Davini, Alessandro Ferri, Cristiano Galbiati, Graham Giovanetti, Alberto Gola, George Korga, Andrea Mandarano, Marco Marcante, Giovanni Paternoster, Claudio Piemonte, Alessandro Razeto, Veronica Regazzoni, Davide Sablone, Claudio Savarese, Gaetano Zappalá, Nicola Zorzi

Abstract: We report on the characterization of near-ultraviolet high density silicon photomultiplier (\SiPM) developed at Fondazione Bruno Kessler (\FBK) at cryogenic temperature. A dedicated setup was built to measure the primary dark noise and correlated noise of the \SiPMs\ between 40 and 300~K. Moreover, an analysis program and data acquisition system were developed to allow the precise characterization… ▽ More We report on the characterization of near-ultraviolet high density silicon photomultiplier (\SiPM) developed at Fondazione Bruno Kessler (\FBK) at cryogenic temperature. A dedicated setup was built to measure the primary dark noise and correlated noise of the \SiPMs\ between 40 and 300~K. Moreover, an analysis program and data acquisition system were developed to allow the precise characterization of these parameters, some of which can vary up to 7 orders of magnitude between room temperature and 40~K. We demonstrate that it is possible to operate the \FBK\ near-ultraviolet high density \SiPMs\ at temperatures lower than 100~K with a dark rate below 0.01 cps/mm$^2$ and total correlated noise probability below 35\% at an over-voltage of 6~V. These results are relevant for the development of future cryogenic particle detectors using \SiPMs\ as photosensors. △ Less

Submitted 29 June, 2017; v1 submitted 6 October, 2016; originally announced October 2016.

Journal ref: IEEE Transactions on Electron Devices (Volume: 64, Issue: 2, Feb. 2017) Page(s): 521 - 526

eXTP -- enhanced X-ray Timing and Polarimetry Mission

Authors: S. N. Zhang, M. Feroci, A. Santangelo, Y. W. Dong, H. Feng, F. J. Lu, K. Nandra, Z. S. Wang, S. Zhang, E. Bozzo, S. Brandt, A. De Rosa, L. J. Gou, M. Hernanz, M. van der Klis, X. D. Li, Y. Liu, P. Orleanski, G. Pareschi, M. Pohl, J. Poutanen, J. L. Qu, S. Schanne, L. Stella, P. Uttley , et al. (160 additional authors not shown)

Abstract: eXTP is a science mission designed to study the state of matter under extreme conditions of density, gravity and magnetism. Primary targets include isolated and binary neutron stars, strong magnetic field systems like magnetars, and stellar-mass and supermassive black holes. The mission carries a unique and unprecedented suite of state-of-the-art scientific instruments enabling for the first time… ▽ More eXTP is a science mission designed to study the state of matter under extreme conditions of density, gravity and magnetism. Primary targets include isolated and binary neutron stars, strong magnetic field systems like magnetars, and stellar-mass and supermassive black holes. The mission carries a unique and unprecedented suite of state-of-the-art scientific instruments enabling for the first time ever the simultaneous spectral-timing-polarimetry studies of cosmic sources in the energy range from 0.5-30 keV (and beyond). Key elements of the payload are: the Spectroscopic Focusing Array (SFA) - a set of 11 X-ray optics for a total effective area of about 0.9 m^2 and 0.6 m^2 at 2 keV and 6 keV respectively, equipped with Silicon Drift Detectors offering <180 eV spectral resolution; the Large Area Detector (LAD) - a deployable set of 640 Silicon Drift Detectors, for a total effective area of about 3.4 m^2, between 6 and 10 keV, and spectral resolution <250 eV; the Polarimetry Focusing Array (PFA) - a set of 2 X-ray telescope, for a total effective area of 250 cm^2 at 2 keV, equipped with imaging gas pixel photoelectric polarimeters; the Wide Field Monitor (WFM) - a set of 3 coded mask wide field units, equipped with position-sensitive Silicon Drift Detectors, each covering a 90 degrees x 90 degrees FoV. The eXTP international consortium includes mostly major institutions of the Chinese Academy of Sciences and Universities in China, as well as major institutions in several European countries and the United States. The predecessor of eXTP, the XTP mission concept, has been selected and funded as one of the so-called background missions in the Strategic Priority Space Science Program of the Chinese Academy of Sciences since 2011. The strong European participation has significantly enhanced the scientific capabilities of eXTP. The planned launch date of the mission is earlier than 2025. △ Less

Submitted 29 July, 2016; originally announced July 2016.

Comments: 16 pages, 16 figures. Oral talk presented at SPIE Astronomical Telescopes and Instrumentation, June 26 to July 1, 2016, Edingurgh, UK

Journal ref: Science China Physics, Mechanics & Astronomy, 2019, Volume 62, Issue 2, article id. 29502, 25 pp

Development and tests of a new prototype detector for the XAFS beamline at Elettra Synchrotron in Trieste

Authors: S Fabiani, M Ahangarianabhari, G Baldazzi, P Bellutti, G Bertuccio, M Bruschi, J Bufon, S Carrato, A Castoldi, G Cautero, S Ciano, A Cicuttin, M L Crespo, M Dos Santos, M Gandola, G Giacomini, D Giuressi, C Guazzoni, R H Menk, J Niemela, L Olivi, A Picciotto, C Piemonte, I Rashevskaya, A Rachevski , et al. (8 additional authors not shown)

Abstract: The XAFS beamline at Elettra Synchrotron in Trieste combines X-ray absorption spectroscopy and X-ray diffraction to provide chemically specific structural information of materials. It operates in the energy range 2.4-27 keV by using a silicon double reflection Bragg monochromator. The fluorescence measurement is performed in place of the absorption spectroscopy when the sample transparency is too… ▽ More The XAFS beamline at Elettra Synchrotron in Trieste combines X-ray absorption spectroscopy and X-ray diffraction to provide chemically specific structural information of materials. It operates in the energy range 2.4-27 keV by using a silicon double reflection Bragg monochromator. The fluorescence measurement is performed in place of the absorption spectroscopy when the sample transparency is too low for transmission measurements or the element to study is too diluted in the sample. We report on the development and on the preliminary tests of a new prototype detector based on Silicon Drift Detectors technology and the SIRIO ultra low noise front-end ASIC. The new system will be able to reduce drastically the time needed to perform fluorescence measurements, while kee** a short dead time and maintaining an adequate energy resolution to perform spectroscopy. The custom-made silicon sensor and the electronics are designed specifically for the beamline requirements. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: Proceeding of the 6YRM 12th-14th Oct 2015 - L'Aquila (Italy). Accepted for publication on Journal of Physics: Conference Series

SiPM and front-end electronics development for Cherenkov light detection

Authors: G. Ambrosi, F. Acerbi, E. Bissaldi, A. Ferri, F. Giordano, A. Gola, M. Ionica, R. Paoletti, C. Piemonte, G. Paternoster, D. Simone, V. Vagelli, G. Zappala, N. Zorzi

Abstract: The Italian Institute of Nuclear Physics (INFN) is involved in the development of a demonstrator for a SiPM-based camera for the Cherenkov Telescope Array (CTA) experiment, with a pixel size of 6$\times$6 mm$^2$. The camera houses about two thousands electronics channels and is both light and compact. In this framework, a R&D program for the development of SiPMs suitable for Cherenkov light detect… ▽ More The Italian Institute of Nuclear Physics (INFN) is involved in the development of a demonstrator for a SiPM-based camera for the Cherenkov Telescope Array (CTA) experiment, with a pixel size of 6$\times$6 mm$^2$. The camera houses about two thousands electronics channels and is both light and compact. In this framework, a R&D program for the development of SiPMs suitable for Cherenkov light detection (so called NUV SiPMs) is ongoing. Different photosensors have been produced at Fondazione Bruno Kessler (FBK), with different micro-cell dimensions and fill factors, in different geometrical arrangements. At the same time, INFN is develo** front-end electronics based on the waveform sampling technique optimized for the new NUV SiPM. Measurements on 1$\times$1 mm$^2$, 3$\times$3 mm$^2$, and 6$\times$6 mm$^2$ NUV SiPMs coupled to the front-end electronics are presented △ Less

Submitted 10 September, 2015; originally announced September 2015.

Comments: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

Measurements and tests on FBK silicon sensors with an optimized electronic design for a CTA camera

Authors: G. Ambrosi, M. Ambrosio, C. Aramo, E. Bissaldi, M. Capasso, D. Corti, A. de Angelis, F. de Palma, F. Ferrarotto, A. Ferri, S. Garrappa, N. Giglietto, F. Giordano, A. Gola, M. Ionica, M. Iori, F. Licciulli, M. Mariotti, C. Marzocca, R. Paoletti, C. Piemonte, V. Postolache, R. Rando, C. Stella, P. Vallania , et al. (1 additional authors not shown)

Abstract: In October 2013, the Italian Ministry approved the funding of a Research & Development (R&D) study, within the "Progetto Premiale TElescopi CHErenkov made in Italy (TECHE)", devoted to the development of a demonstrator for a camera for the Cherenkov Telescope Array (CTA) consortium. The demonstrator consists of a sensor plane based on the Silicon Photomultiplier (SiPM) technology and on an electro… ▽ More In October 2013, the Italian Ministry approved the funding of a Research & Development (R&D) study, within the "Progetto Premiale TElescopi CHErenkov made in Italy (TECHE)", devoted to the development of a demonstrator for a camera for the Cherenkov Telescope Array (CTA) consortium. The demonstrator consists of a sensor plane based on the Silicon Photomultiplier (SiPM) technology and on an electronics designed for signal sampling. Preliminary tests on a matrix of sensors produced by the Fondazione Bruno Kessler (FBK-Trento, Italy) and on electronic prototypes produced by SITAEL S.p.A. will be presented. In particular, we used different designs of the electronics in order to optimize the output signals in terms of tail cancellation. This is crucial for applications where a high background is expected, as for the CTA experiment. △ Less

Submitted 19 November, 2014; originally announced November 2014.

Comments: 5 pages, 6 figures; Proceedings of the 10th Workshop on Science with the New Generation of High-Energy Gamma-ray experiments (SciNeGHE) - PoS(Scineghe2014)004

Test Beam Results of 3D Silicon Pixel Sensors for the ATLAS upgrade

Authors: ATLAS 3D Collaboration, P. Grenier, G. Alimonti, M. Barbero, R. Bates, E. Bolle, M. Borri, M. Boscardin, C. Buttar, M. Capua, M. Cavalli-Sforza, M. Cobal, A. Cristofoli, G-F. Dalla Betta, G. Darbo, C. Da Vià, E. Devetak, B. DeWilde, B. Di Girolamo, D. Dobos, K. Einsweiler, D. Esseni, S. Fazio, C. Fleta, J. Freestone , et al. (68 additional authors not shown)

Abstract: Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sen… ▽ More Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sensors were bump bonded to the front-end chip currently used in the ATLAS pixel detector. Full 3D sensors, with electrodes penetrating through the entire wafer thickness and active edge, and double-sided 3D sensors with partially overlap** bias and read-out electrodes were tested and showed comparable performance. △ Less

Submitted 21 January, 2011; originally announced January 2011.

Journal ref: Nucl.Instrum.Meth.A638:33-40,2011

Characterization of 3D-DDTC detectors on p-type substrates

Authors: G. -F. Dalla Betta, M. Boscardin, L. Bosisio, G. Darbo, P. Gabos, C. Gemme, M. Koehler, A. La Rosa, U. Parzefall, H. Pernegger, C. Piemonte, M. Povoli, I. Rachevskaia, S. Ronchin, L. Wiik, A. Zoboli, N. Zorzi

Abstract: We report on the electrical and functional characterization of 3D Double-side, Double-Type-Column (3D- DDTC) detectors fabricated on p-type substrates. Results relevant to detectors in the diode, strip and pixel configurations are presented, and demonstrate a clear improvement in the charge collection performance compared to the first prototypes of these detectors. We report on the electrical and functional characterization of 3D Double-side, Double-Type-Column (3D- DDTC) detectors fabricated on p-type substrates. Results relevant to detectors in the diode, strip and pixel configurations are presented, and demonstrate a clear improvement in the charge collection performance compared to the first prototypes of these detectors. △ Less

Submitted 25 November, 2009; originally announced November 2009.

Comments: 8 pages, 14 figures, presented at IEEE-NSS Conference 2009, Hilton Disney World, Orlando, Florida 25-31 October 2009

Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade

Authors: A. La Rosa, M. Boscardin, G. -F. Dalla Betta, G. Darbo, C. Gemme, H. Pernegger, C. Piemonte, M. Povoli, S. Ronchin, A. Zoboli, N. Zorzi, E. Bolle, M. Borri, C. Da Via, S. Dong, S. Fazio, P. Grenier, S. Grinstein, H. Gjersdal, P. Hansson, F. Huegging, P. Jackson, M. Kocian, F. Rivero, O. Rohne , et al. (7 additional authors not shown)

Abstract: 3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction c… ▽ More 3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110um to 150um. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and an overview of preliminary results from the CERN beam test. △ Less

Submitted 20 October, 2009; originally announced October 2009.

Comments: 8 pages, 8 figures, presented at RD09 - 9th International Conference on Large Scale Applications and Radiation Hardness of Semiconductor Detectors, 30 September - 2 October 2009, Florence, Italy

Journal ref: Proceeding of Science PoS(RD09)032 (2009)

Development of 3D-DDTC pixel detectors for the ATLAS upgrade

Authors: G. -F. Dalla Betta, M. Boscardin, G. Darbo, C. Gemme, A. La Rosa, H. Pernegger, C. Piemonte, M. Povoli, S. Ronchin, A. Zoboli, N. Zorzi

Abstract: We report on the development of n-on-p, 3D Double-Side Double Type Column (3D-DDTC) pixel detectors fabricated at FBK-irst (Trento, Italy) and oriented to the ATLAS upgrade. The considered fabrication technology is simpler than that required for full 3D detectors with active edge, but the detector efficiency and radiation hardness critically depend on the columnar electrode overlap and should be… ▽ More We report on the development of n-on-p, 3D Double-Side Double Type Column (3D-DDTC) pixel detectors fabricated at FBK-irst (Trento, Italy) and oriented to the ATLAS upgrade. The considered fabrication technology is simpler than that required for full 3D detectors with active edge, but the detector efficiency and radiation hardness critically depend on the columnar electrode overlap and should be carefully evaluated. The first assemblies of these sensors (featuring 2, 3, or 4 columns per pixel) with the ATLAS FEI3 read-out chip have been tested in laboratory. Selected results from the electrical and functional characterization with radioactive sources are here discussed. △ Less

Submitted 19 October, 2009; originally announced October 2009.

Comments: 20 pages, 14 figures, presented at 7th International "Hiroshima" Symposium on Development and Applications of Semiconductor Tracking Devices International Conference Center Hiroshima, Japan, Aug. 29-Sep.1, 2009

Journal ref: Nucl.Instrum.Meth.A636:S15-S23,2011

Silicon photomultiplier arrays - a novel photon detector for a high resolution tracker produced at FBK-irst, Italy

Authors: R. Greim, H. Gast, T. Kirn, J. Olzem, G. Roper Yearwood, S. Schael, N. Zimmermann, G. Ambrosi, P. Azzarello, R. Battiston, C. Piemonte

Abstract: A silicon photomultiplier (SiPM) array has been developed at FBK-irst having 32 channels and a dimension of 8.0 x 1.1 mm^2. Each 250 um wide channel is subdivided into 5 x 22 rectangularly arranged pixels. These sensors are developed to read out a modular high resolution scintillating fiber tracker. Key properties like breakdown voltage, gain and photon detection efficiency (PDE) are found to be… ▽ More A silicon photomultiplier (SiPM) array has been developed at FBK-irst having 32 channels and a dimension of 8.0 x 1.1 mm^2. Each 250 um wide channel is subdivided into 5 x 22 rectangularly arranged pixels. These sensors are developed to read out a modular high resolution scintillating fiber tracker. Key properties like breakdown voltage, gain and photon detection efficiency (PDE) are found to be homogeneous over all 32 channels of an SiPM array. This could make scintillating fiber trackers with SiPM array readout a promising alternative to available tracker technologies, if noise properties and the PDE are improved. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Journal ref: Nucl.Phys.Proc.Suppl.197:83-86,2009

A Scintillating Fiber Tracker With SiPM Readout

Authors: G. Roper Yearwood, B. Beischer, Ch. -H. Chung, Ph. v. Doetinchem, H. Gast, R. Greim, T. Kirn, S. Schael, N. Zimmermann, T. Nakada, G. Ambrosi, P. Azzarello, R. Battiston, C. Piemonte

Abstract: We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support struc… ▽ More We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support structure. SiPM arrays with a channel pitch of 250 micron are placed in front of the fibers. We show the results of the first module prototype using multiclad fibers of types Bicron BCF-20 and Kuraray SCSF-81M that were read out by novel 32-channel SiPM arrays from FBK-irst/INFN Perugia as well as 32-channel SiPM arrays produced by Hamamatsu. A spatial resolution of 88 micron +/- 6 micron at an average yield of 10 detected photons per minimal ionizig particle has been achieved. △ Less

Submitted 2 December, 2008; originally announced December 2008.

Comments: 5 pages, 7 figures, submitted as proceedings to the 11th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD08)

Journal ref: Nucl.Phys.Proc.Suppl.197:245-249,2009

Radiation Damage Studies of Silicon Photomultipliers

Authors: P. Bohn, A. Clough, E. Hazen, A. Heering, J. Rohlf, J. Freeman, S. Los, E. Cascio, S. Kuleshov, Y. Musienko, C. Piemonte

Abstract: We report on the measurement of the radiation hardness of silicon photomultipliers (SiPMs) manufactured by Fondazione Bruno Kessler in Italy (1 mm$^2$ and 6.2 mm$^2$), Center of Perspective Technology and Apparatus in Russia (1 mm$^2$ and 4.4 mm$^2$), and Hamamatsu Corporation in Japan (1 mm$^2$). The SiPMs were irradiated using a beam of 212 MeV protons at Massachusetts General Hospital, rece… ▽ More We report on the measurement of the radiation hardness of silicon photomultipliers (SiPMs) manufactured by Fondazione Bruno Kessler in Italy (1 mm$^2$ and 6.2 mm$^2$), Center of Perspective Technology and Apparatus in Russia (1 mm$^2$ and 4.4 mm$^2$), and Hamamatsu Corporation in Japan (1 mm$^2$). The SiPMs were irradiated using a beam of 212 MeV protons at Massachusetts General Hospital, receiving fluences of up to $3 \times 10^{10}$ protons per cm$^2$ with the SiPMs at operating voltage. Leakage currents were read continuously during the irradiation. The delivery of the protons was paused periodically to record scope traces in response to calibrated light pulses to monitor the gains, photon detection efficiencies, and dark counts of the SiPMs. The leakage current and dark noise are found to increase with fluence. Te leakage current is found to be proportional to the mean square deviation of the noise distribution, indicating the dark counts are due to increased random individual pixel activation, while SiPMs remain fully functional as photon detectors. The SiPMs are found to anneal at room temperature with a reduction in the leakage current by a factor of 2 in about 100 days. △ Less

Submitted 27 September, 2008; originally announced September 2008.

Comments: 35 pages, 25 figures

Journal ref: Nucl.Instrum.Meth.A598:722-736,2009

Beam test results of the irradiated Silicon Drift Detector for ALICE

Authors: S. Kushpil, E. Crescio, P. Giubellino, M. Idzik, A. Kolozhvari, V. Kushpil, M. I. Martinez, G. Mazza, A. Mazzoni, F. Meddi, D. Nouais, V. Petracek, C. Piemonte, A. Rashevsky, L. Riccati, A. Rivetti, F. Tosello, A. Vacchi, R. Wheadon

Abstract: The Silicon Drift Detectors will equip two of the six cylindrical layers of high precision position sensitive detectors in the ITS of the ALICE experiment at LHC. In this paper we report the beam test results of a SDD irradiated with 1 GeV electrons. The aim of this test was to verify the radiation tolerance of the device under an electron fluence equivalent to twice particle fluence expected du… ▽ More The Silicon Drift Detectors will equip two of the six cylindrical layers of high precision position sensitive detectors in the ITS of the ALICE experiment at LHC. In this paper we report the beam test results of a SDD irradiated with 1 GeV electrons. The aim of this test was to verify the radiation tolerance of the device under an electron fluence equivalent to twice particle fluence expected during 10 years of ALICE operation. △ Less

Submitted 7 December, 2005; originally announced December 2005.

Comments: 6 pages,6 figures, to appear in the proceedings of International Workshop In high Multiplicity Environments (TIME'05), 3-7 October 2005, Zurich,Switzerland

Journal ref: Nucl.Instrum.Meth.A566:94-99,2006