-
Broadband Ultrahigh-Resolution chip-scale Scanning Soliton Dual-Comb Spectroscopy
Authors:
Tong Lin,
Avik Dutt,
Chaitanya Joshi,
Xingchen Ji,
Christopher T. Phare,
Yoshitomo Okawachi,
Alexander L. Gaeta,
Michal Lipson
Abstract:
We present a chip-scale scanning dual-comb spectroscopy (SDCS) approach for broadband ultrahigh-resolution spectral acquisition. SDCS uses Si3N4 microring resonators that generate two single soliton micro-combs spanning 37 THz (300 nm) on the same chip from a single 1550-nm laser, forming a high-mutual-coherence dual-comb. We realize continuous tuning of the dual-comb system over the entire optica…
▽ More
We present a chip-scale scanning dual-comb spectroscopy (SDCS) approach for broadband ultrahigh-resolution spectral acquisition. SDCS uses Si3N4 microring resonators that generate two single soliton micro-combs spanning 37 THz (300 nm) on the same chip from a single 1550-nm laser, forming a high-mutual-coherence dual-comb. We realize continuous tuning of the dual-comb system over the entire optical span of 37.5 THz with high precision using integrated microheater-based wavelength trackers. This continuous wavelength tuning is enabled by simultaneous tuning of the laser frequency and the two single soliton micro-combs over a full free spectral range of the microrings. We measure the SDCS resolution to be 319+-4.6 kHz. Using this SDCS system, we perform the molecular absorption spectroscopy of H13C14N over its 2.3 THz (18 nm)-wide overtone band, and show that the massively parallel heterodyning offered by the dual-comb expands the effective spectroscopic tuning speed of the laser by one order of magnitude. Our chip-scale SDCS opens the door to broadband spectrometry and massively parallel sensing with ultrahigh spectral resolution.
△ Less
Submitted 13 January, 2020; v1 submitted 3 January, 2020;
originally announced January 2020.
-
Silicon Optical Phased Array with High-Efficiency Beam Formation over 180 Degree Field of View
Authors:
Christopher T. Phare,
Min Chul Shin,
Steven A. Miller,
Brian Stern,
Michal Lipson
Abstract:
Chip-scale optical phased arrays could enable compact beam steering and LIDAR for autonomous vehicles, precision robotics, and free-space optical communications. Because these applications demand wide angle beam steering as well as high optical power in the output beam, a natural design choice would be to space the array emitters at a half-wavelength pitch, as is common in radiofrequency phased ar…
▽ More
Chip-scale optical phased arrays could enable compact beam steering and LIDAR for autonomous vehicles, precision robotics, and free-space optical communications. Because these applications demand wide angle beam steering as well as high optical power in the output beam, a natural design choice would be to space the array emitters at a half-wavelength pitch, as is common in radiofrequency phased arrays. Optical phased arrays, however, unlike RF phased arrays, have been limited by the tradeoff between field of view (i.e. angle steering) and beamforming efficiency (i.e. optical power in the output beam). This tradeoff exists because optical phased arrays rely on waveguides as emitters, which suffer from strong crosstalk when placed in close proximity relative to their mode size. Here we overcome these limitations and demonstrate a platform for optical phased arrays with 180° field of view, where more than 72 percent of the power is carried in a single diffraction-limited beam even when steered up to 60° off-axis. Our platform leverages high index-contrast, dispersion-engineered waveguides spaced one half-wavelength apart without incurring crosstalk.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
30 GHz Zeno-based Graphene Electro-optic Modulator
Authors:
Christopher T. Phare,
Yoon-Ho Daniel Lee,
Jaime Cardenas,
Michal Lipson
Abstract:
Graphene has generated exceptional interest as an optoelectronic material because its high carrier mobility and broadband absorption promise to make extremely fast and broadband electro-optic devices possible. Electro-optic graphene modulators reported to date, however, have been limited in bandwidth to a few GHz because of the large capacitance required to achieve reasonable voltage swings. Here…
▽ More
Graphene has generated exceptional interest as an optoelectronic material because its high carrier mobility and broadband absorption promise to make extremely fast and broadband electro-optic devices possible. Electro-optic graphene modulators reported to date, however, have been limited in bandwidth to a few GHz because of the large capacitance required to achieve reasonable voltage swings. Here we demonstrate a graphene electro-optic modulator based on the classical Zeno effect that shows drastically increased speed and efficiency. Our device operates with a 30 GHz bandwidth, over an order of magnitude faster than prior work, and a state-of-the-art modulation efficiency of 1.5 dB/V. We also show the first high-speed large-signal operation in a graphene modulator, paving the way for fast digital communications using this platform. The modulator uniquely uses silicon nitride waveguides, an otherwise completely passive material platform, with promising applications for ultra-low-loss broadband structures and nonlinear optics.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
-
Silicon-Chip Mid-Infrared Frequency Comb Generation
Authors:
Austin G. Griffith,
Ryan K. W. Lau,
Jaime Cardenas,
Yoshitomo Okawachi,
Aseema Mohanty,
Romy Fain,
Yoon Ho Daniel Lee,
Mengjie Yu,
Christopher T. Phare,
Carl B. Poitras,
Alexander L. Gaeta,
Michal Lipson
Abstract:
Optical frequency combs represent a revolutionary technology for high precision spectroscopy due to their narrow linewidths and precise frequency spacing. Generation of such combs in the mid-infrared (IR) spectral region (2-20 um) is of great interest due to the presence of a large number of gas absorption lines in this wavelength regime. Recently, frequency combs have been demonstrated in the MIR…
▽ More
Optical frequency combs represent a revolutionary technology for high precision spectroscopy due to their narrow linewidths and precise frequency spacing. Generation of such combs in the mid-infrared (IR) spectral region (2-20 um) is of great interest due to the presence of a large number of gas absorption lines in this wavelength regime. Recently, frequency combs have been demonstrated in the MIR in several platforms, including fiber combs, mode-locked lasers, optical parametric oscillators, and quantum cascade lasers. However, these platforms are either relatively bulky or challenging to integrate on-chip. An alternative approach using parametric mixing in microresonators is highly promising since the platform is extremely compact and can operate with relatively low powers. However, material and dispersion engineering limitations have prevented the realization of a microresonator comb source past 2.55 um. Although silicon could in principle provide a CMOS compatible platform for on-chip comb generation deep into the mid-IR, to date, silicon's linear and nonlinear losses have prevented the realization of a microresonator-based comb source. Here we overcome these limitations and realize a broadband frequency comb spanning from 2.1 um to 3.5 um and demonstrate its viability as a spectroscopic sensing platform. Such a platform is compact and robust and offers the potential to be versatile and durable for use outside the laboratory environment for applications such as real-time monitoring of atmospheric gas conditions.
△ Less
Submitted 5 August, 2014;
originally announced August 2014.
-
High Q SiC microresonators
Authors:
Jaime Cardenas,
Mian Zhang,
Christopher T. Phare,
Shreyas Y. Shah,
Carl B. Poitras,
Michal Lipson
Abstract:
We demonstrate photonic devices based on standard 3C SiC epitaxially grown on silicon. We achieve high optical confinement by taking advantage of the high stiffness of SiC and undercutting the underlying silicon substrate. We demonstrate a 20 um radius suspended microring resonator with Q of 18000 fabricated on commercially available SiC-on-silicon substrates.
We demonstrate photonic devices based on standard 3C SiC epitaxially grown on silicon. We achieve high optical confinement by taking advantage of the high stiffness of SiC and undercutting the underlying silicon substrate. We demonstrate a 20 um radius suspended microring resonator with Q of 18000 fabricated on commercially available SiC-on-silicon substrates.
△ Less
Submitted 12 June, 2013;
originally announced June 2013.
