-
Quartic scaling of sound attenuation with frequency in vitreous silica
Authors:
P. -J. Wang,
A. Huynh,
T. -C. Hung,
J. -K. Sheu,
X. Lafosse,
A. Lemaitre,
B. Perrin,
B. Rufflé,
R. Vacher,
C. -K. Sun,
M. Foret
Abstract:
Several theoretical approaches to disordered media predict that acoustic waves should undergo a quartic increase in their attenuation coefficient with increasing frequency in the sub-terahertz region. Such Rayleigh-type scattering would be related to the anomalous low-temperature plateau in the thermal conductivity and to the so-called boson peak, i.e. an excess of vibrational modes above the Deby…
▽ More
Several theoretical approaches to disordered media predict that acoustic waves should undergo a quartic increase in their attenuation coefficient with increasing frequency in the sub-terahertz region. Such Rayleigh-type scattering would be related to the anomalous low-temperature plateau in the thermal conductivity and to the so-called boson peak, i.e. an excess of vibrational modes above the Debye density of states at around 1 THz. Brillouin scattering of light allows the measurement of sound absorption and velocity dispersion up to about 0.1 THz while inelastic x-ray scattering is limited to frequencies larger than about 1 THz. We take advantage of the advent of ultrafast optical techniques to explore the acoustical properties of amorphous SiO2 layers in the difficult but crucial frequency region within this gap. A quartic scaling law with frequency is clearly revealed between 0.2 and 0.9 THz, which is further shown to be independent of temperature. This strongly damped regime is accompanied by a decrease in the sound velocity already starting from about 0.5 THz, in line with theories. Our study assists to clarify the anomalous acoustical properties in glasses at frequencies entering the boson peak region.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Probing Gigahertz Coherent Acoustic Phonons in TiO$_{2}$ Mesoporous Thin Films
Authors:
E. R. Cardozo de Oliveira,
C. Xiang,
M. Esmann,
N. Lopez Abdala,
M. C. Fuertes,
A. Bruchhausen,
H. Pastoriza,
B. Perrin,
G. J. A. A. Soler-Illia,
N. D. Lanzillotti-Kimura
Abstract:
Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90…
▽ More
Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90 GHz, and quality factors from 3 to 7. Numerical simulations show a good agreement with the picosecond ultrasonics experiments. We also numerically study the effect of changes in the speed of sound on the performance of the resonator. This change could be induced by liquid infiltration into the mesopores. Our findings constitute the first step towards the engineering of building blocks based on mesoporous thin films for reconfigurable optoacoustic sensors.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Single-crystal elastic moduli, anisotropy and the B1-B2 phase transition of NaCl at high pressures: Experiment vs. ab-initio calculations
Authors:
Feng Xu,
Laurent Belliard,
Chenhui Li,
Philippe Djemia,
Loïc Becerra,
Haijun Huang,
Bernard Perrin,
Andreas Zerr
Abstract:
Single-crystal elastic moduli, Cij, and the B1-B2 phase transition of NaCl were investigated experimentally, using time-domain Brillouin scattering (TDBS), and theoretically, via density-functional-theory (DFT), to 41 GPa. Thus, we largely extended pressure range where Cij and elastic anisotropy of the solid are measured, including the first experimental data for the high-pressure B2 phase, NaCl-B…
▽ More
Single-crystal elastic moduli, Cij, and the B1-B2 phase transition of NaCl were investigated experimentally, using time-domain Brillouin scattering (TDBS), and theoretically, via density-functional-theory (DFT), to 41 GPa. Thus, we largely extended pressure range where Cij and elastic anisotropy of the solid are measured, including the first experimental data for the high-pressure B2 phase, NaCl-B2. NaCl-B1 exhibits a strong and growing with pressure anisotropy, in contrast to NaCl-B2. Theoretical values obtained using different advanced DFT functionals were compared with our measurements but no one could satisfactorily reproduce our experimental data for NaCl-B1 and NaCl-B2 simultaneously. For all available DFT results on the principal shear moduli and anisotropy, the deviation became pronounced when the degree of compression increased significantly. Similar deviations could be also recognized for other cubic solids having the same B1-type structure and similar bonding, such as CaO, MgO, or (Mg1-x,Fex)O. Furthermore, the available experimental data suggest that the B1-B2 phase transition of NaCl and the above mentioned compounds are governed by the Born stability criterion C44(P) - P > 0.
△ Less
Submitted 22 September, 2022;
originally announced September 2022.
-
Elastic and magnetoelastic properties of TbMnO3 single crystal by nanosecond time resolved acoustics and first-principles calculations
Authors:
Pierre Hemme,
Philippe Djemia,
Pauline Rovillain,
Yann Gallais,
Alain Sacuto,
Anne Forget,
Dorothée Colson,
Eric Charron,
Bernard Perrin,
Laurent Belliard,
Maximilien Cazayous
Abstract:
Time resolved pump and probe acoustics and first-principles calculations were employed to assess elastic properties of the TbMnO3 perovskite manganite having orthorhombic symmetry. Measuring sound velocities of bulk longitudinal and shear acoustic waves propagating along at least two different directions in the high symmetry planes (100), (010) and (001), provided a powerful mean to selectively de…
▽ More
Time resolved pump and probe acoustics and first-principles calculations were employed to assess elastic properties of the TbMnO3 perovskite manganite having orthorhombic symmetry. Measuring sound velocities of bulk longitudinal and shear acoustic waves propagating along at least two different directions in the high symmetry planes (100), (010) and (001), provided a powerful mean to selectively determine the six diagonal elastic constants C11= 227 GPa, C22= 349 GPa, C33= 274 GPa, C44= 71 GPa, C55= 57 GPa, C66= 62 GPa. Among the three remaining off-diagonal ones, C23= 103 GPa was determined with a bissectrice direction. Density functional theory calculations with colinear spin-polarized provided complementary insights on their optical, elastic and magnetoelastic properties.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Elastic properties assessment in the multiferroic BiFeO3 by pump and probe method
Authors:
Pierre Hemme,
Philippe Djemia,
Pauline Rovillain,
Yann Gallais,
Alain Sacuto,
Anne Forget,
Dorothee Colson,
Eric Charron,
Bernard Perrin,
Laurent Belliard,
Maximilien Cazayous
Abstract:
We have performed elasticity measurements in the bulk multiferroic BiFeO3 (BFO) using acoustical pump and probe spectroscopy. The sound velocities of the (quasi)-longitudinal and of the two (quasi)-transverse acoustic waves along three independent directions of the (110) surface have been measured. Moreover, one surface wave and one longitudinal wave propagating perpendicular to the surface have b…
▽ More
We have performed elasticity measurements in the bulk multiferroic BiFeO3 (BFO) using acoustical pump and probe spectroscopy. The sound velocities of the (quasi)-longitudinal and of the two (quasi)-transverse acoustic waves along three independent directions of the (110) surface have been measured. Moreover, one surface wave and one longitudinal wave propagating perpendicular to the surface have been detected. Based on initial input values of the six independent Cij elastic constants determined by our density functional theory calculations and our eleven experimental velocities, the numerical resolution of the acoustic equations allows to determine all the Cij elastic constants of BFO. The propagation direction dependence of volume and surface waves phase velocities allows the unambiguously assignment of the waves, hence the polarization of phonons.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Mesoporous Thin-Films for Acoustic Devices in the Gigahertz Range
Authors:
N. Lopez-Abdala,
M. Esmann,
M. C. Fuertes,
P. C. Angelomé,
O. Ortiz,
A. Bruchhausen,
H. Pastoriza,
B. Perrin,
G. J. A. A. Soler-Illia,
N. D. Lanzillotti-Kimura
Abstract:
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoac…
▽ More
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoacoustics. However, the presence of pores with sizes comparable to the acoustic wavelength is intuitively perceived as a major roadblock in nanoacoustics. Here we present multilayered nanoacoustic resonators based on mesoporous SiO$_2$ thin-films showing acoustic resonances in the 5-100 GHz range. We characterize the acoustic response of the system using coherent phonon generation experiments. Despite resonance wavelengths comparable to the pore size, we observe for the first time unexpectedly well-defined acoustic resonances with Q-factors around 10. Our results open the path to a promising platform for nanoacoustic sensing and reconfigurable acoustic nanodevices based on soft, inexpensive fabrication methods.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
Coherent generation and detection of acoustic phonons in topological nanocavities
Authors:
G. Arregui,
O. Ortíz,
M. Esmann,
C. M. Sotomayor-Torres,
C. Gomez-Carbonell,
O. Mauguin,
B. Perrin,
A. Lemaître,
P. D. García,
N. D. Lanzillotti-Kimura
Abstract:
Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of syste…
▽ More
Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. The possibility of engineering systems with unidirectional wave propagation and protected against disorder is at the heart of this growing interest. Topogical acoustic effects have been observed in a variety of systems, most of them based on kHz-MHz sound waves, with typical wavelength of the order of the centimeter. Recently, some of these concepts have been successfully transferred to acoustic phonons in nanoscaled multilayered systems. The reported demonstration of confined topological phononic modes was based on Raman scattering spectroscopy, yet the resolution did not suffice to determine lifetimes and to identify other acoustic modes in the system. Here, we use time-resolved pump-probe measurements using an asynchronous optical sampling (ASOPS) technique to overcome these resolution limitations. By means of one-dimensional GaAs/AlAs distributed Bragg reflectors (DBRs) as building blocks, we engineer high frequency ($\sim$ 200 GHz) topological acoustic interface states. We are able to clearly distinguish confined topological states from stationary band edge modes. The detection scheme reflects the symmetry of the modes directly through the selection rules, evidencing the topological nature of the measured confined state. These experiments enable a new tool in the study of the more complex topology-driven phonon dynamics such as phonon nonlinearities and optomechanical systems with simultaneous confinement of light and sound.
△ Less
Submitted 24 November, 2018;
originally announced November 2018.
-
High spectral resolution of GaAs/AlAs phononic cavities by subharmonic resonant pump-probe excitation
Authors:
Camille Lagoin,
Bernard Perrin,
Paola Atkinson,
Daniel Garcia-Sanchez
Abstract:
We present here precise measurement of the resonance frequency, lifetime and shape of confined acoustic modes in the tens of GHz regime in GaAs/AlAs superlattice planar and micropillar cavities at low temperature ($\sim 20\,\textrm{K}$). The subharmonic resonant pump-probe technique, where the repetition rate of the pump laser is tuned to a subharmonic of the cavity resonance to maximize the ampli…
▽ More
We present here precise measurement of the resonance frequency, lifetime and shape of confined acoustic modes in the tens of GHz regime in GaAs/AlAs superlattice planar and micropillar cavities at low temperature ($\sim 20\,\textrm{K}$). The subharmonic resonant pump-probe technique, where the repetition rate of the pump laser is tuned to a subharmonic of the cavity resonance to maximize the amplitude of the acoustic resonance, in combination with a Sagnac interferometer technique for high sensitivity ($\sim 10 \,\textrm{fm}$) to the surface displacement, has been used. The cavity fundamental mode at $\sim 20\,\textrm{GHz}$ and the higher order cavity harmonics up to $\sim 180\,\textrm{GHz}$ have been clearly resolved. Mechanical Q-values up to $2.7 \times 10^4$ have been measured in a planar superlattice, and direct spatial map** of confined acoustic modes in a superlattice cavity micropillar has been demonstrated. The Q-frequency product obtained is $ \sim 5 \times 10^{14}$ demonstrating the suitability of these superlattice cavities for optomechanical applications.
△ Less
Submitted 22 September, 2018;
originally announced September 2018.
-
Breakdown of Herring's processes in cubic semiconductors for sub-terahertz longitudinal acoustic phonons
Authors:
Maxime Markov,
Jelena Sjakste,
Nathalie Vast,
Romain Legrand,
Bernard Perrin,
Lorenzo Paulatto
Abstract:
In the present work we explain the anomalous behavior of the attenuation of the longitudinal acoustic phonon in GaAs as a function of the phonon energy $ω$ in the sub-THz domain. These attenuations along the [100] direction show a plateau between 0.6 and 1 GHz at low temperatures. We found an excellent agreement between measurements performed by some of us, and new \textit{ab initio} calculations…
▽ More
In the present work we explain the anomalous behavior of the attenuation of the longitudinal acoustic phonon in GaAs as a function of the phonon energy $ω$ in the sub-THz domain. These attenuations along the [100] direction show a plateau between 0.6 and 1 GHz at low temperatures. We found an excellent agreement between measurements performed by some of us, and new \textit{ab initio} calculations of third-order anharmonic processes. The formation of the plateau is explained by the competition between different phonon-phonon scattering processes as Herring's mechanism, which dominates at low frequencies, saturates and disappears. The plateau is shown to be determined by the phononic final-state phase-space available at a given temperature. We predict that a change of scattering mechanism should also show up in the attenuation of silicon around 1.2-1.7 THz, and argue that the attenuation plateau is a general feature of cubic semiconductors.
△ Less
Submitted 29 November, 2018; v1 submitted 4 August, 2018;
originally announced August 2018.
-
Spatio-Temporal Imaging of the Acoustic Field Emitted by a Single Copper Nanowire Copper Nanowires Fabrication
Authors:
Cyril Jean,
Laurent Belliard,
Thomas W. Cornelius,
Olivier Thomas,
Yan Pennec,
Marco Cassinelli,
Maria Eugenia Toimil-Molares,
Bernard Perrin
Abstract:
The monochromatic and geometrically anisotropic acoustic field generated by 400 nm and 120 nm diameter copper nanowires simply dropped on a 10 $μ$m silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both side of the silicon substrate. In reflection, t…
▽ More
The monochromatic and geometrically anisotropic acoustic field generated by 400 nm and 120 nm diameter copper nanowires simply dropped on a 10 $μ$m silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both side of the silicon substrate. In reflection, the first radial breathing mode of the nanowire is excited and detected. In transmission, the longitudinal and shear waves are observed. The longitudinal signal is followed by a monochromatic component associated with the relaxation of the nanowire's first radial breathing mode. Finite Difference Time Domain (FDTD) simulations are performed and accurately reproduce the diffracted field. A shape anisotropy resulting from the large aspect ratio of the nanowire is detected in the acoustic field. The orientation of the underlying nanowires is thus acoustically deduced.
△ Less
Submitted 23 September, 2016;
originally announced September 2016.
-
Acoustic confinement in superlattice cavities
Authors:
Daniel Garcia-Sanchez,
Samuel Déleglise,
Jean-Louis Thomas,
Paola Atkinson,
Camille Lagoin,
Bernard Perrin
Abstract:
The large coupling rate between the acoustic and optical fields confined in GaAs/AlAs superlattice cavities makes them appealing systems for cavity optomechanics. We have developed a mathematical model based on the scattering matrix that allows the acoustic guided modes to be predicted in nano and micropillar superlattice cavities. We demonstrate here that the reflection at the surface boundary co…
▽ More
The large coupling rate between the acoustic and optical fields confined in GaAs/AlAs superlattice cavities makes them appealing systems for cavity optomechanics. We have developed a mathematical model based on the scattering matrix that allows the acoustic guided modes to be predicted in nano and micropillar superlattice cavities. We demonstrate here that the reflection at the surface boundary considerably modifies the acoustic quality factor and leads to significant confinement at the micropillar center. Our mathematical model also predicts unprecedented acoustic Fano resonances on nanopillars featuring small mode volumes and very high mechanical quality factors, making them attractive systems for optomechanical applications.
△ Less
Submitted 28 September, 2016; v1 submitted 7 June, 2016;
originally announced June 2016.
-
Backward Propagating Acoustic Waves in Single Gold Nanobeams
Authors:
Cyril Jean,
Laurent Belliard,
Loïc Becerra,
Bernard Perrin
Abstract:
Femtosecond pump-probe spectroscopy has been carried out on suspended gold nanostructures with a rectangular cross section lithographed on a silicon substrate. With a thickness fixed to 110 nm and a width ranging from 200 nm to 800 nm, size dependent measurements are used to distinguish which confined acoustic modes are detected. Furthermore, in order to avoid any ambiguity due to the measurement…
▽ More
Femtosecond pump-probe spectroscopy has been carried out on suspended gold nanostructures with a rectangular cross section lithographed on a silicon substrate. With a thickness fixed to 110 nm and a width ranging from 200 nm to 800 nm, size dependent measurements are used to distinguish which confined acoustic modes are detected. Furthermore, in order to avoid any ambiguity due to the measurement uncertainties on both the frequency and size, pump and probe beams are also spatially shifted to detect guided acoustic phonons. This leads us to the observation of backward propagating acoustic phonons in the gigahertz range ($\sim$3 GHz) in such nanostructures. While backward wave propagation in elastic waveguides has been predicted and already observed at the macroscale, very few studies have been done at the nanoscale. Here, we show that these backward waves can be used as the unique signature of the width dilatational acoustic mode.
△ Less
Submitted 15 November, 2015;
originally announced November 2015.
-
Direct Observation of Propagating Gigahertz Coherent Guided Acoustic Phonons in Free Standing Single Copper Nanowires
Authors:
Cyril Jean,
Laurent Belliard,
Thomas W. Cornelius,
Olivier Thomas,
Maria-Eugenia Toimil-Molares,
Marco Cassinelli,
Loïc Becerra,
Bernard Perrin
Abstract:
We report on gigahertz acoustic phonon waveguiding in free-standing single copper nanowires studied by femtosecond transient reflectivity measurements. The results are discussed on the basis of the semianalytical resolution of the Pochhammer and Chree equation. The spreading of the generated Gaussian wave packet of two different modes is derived analytically and compared with the observed oscillat…
▽ More
We report on gigahertz acoustic phonon waveguiding in free-standing single copper nanowires studied by femtosecond transient reflectivity measurements. The results are discussed on the basis of the semianalytical resolution of the Pochhammer and Chree equation. The spreading of the generated Gaussian wave packet of two different modes is derived analytically and compared with the observed oscillations of the sample reflectivity. These experiments provide a unique way to independently obtain geometrical and material characterization. This direct observation of coherent guided acoustic phonons in a single nano-object is also the first step toward nanolateral size acoustic transducer and comprehensive studies of the thermal properties of nanowires.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Direct measurement of coherent subterahertz acoustic phonons mean free path in GaAs
Authors:
Romain Legrand,
Agnès Huynh,
Bernard Jusserand,
Aristide Lemaître,
Bernard Perrin
Abstract:
Phonon mean free path is generally inferred from the measurement of thermal conductivity and we are still lacking precise information on this quantity. Recent advances in the field of high frequency phonons transduction using semiconductor superlattices give the opportunity to fill this gap. We present experimental results on the attenuation of longitudinal acoustic phonons in GaAs in the frequenc…
▽ More
Phonon mean free path is generally inferred from the measurement of thermal conductivity and we are still lacking precise information on this quantity. Recent advances in the field of high frequency phonons transduction using semiconductor superlattices give the opportunity to fill this gap. We present experimental results on the attenuation of longitudinal acoustic phonons in GaAs in the frequency and temperature ranges 0.2-1THz and 10-80K respectively. Surprisingly, we observe a plateau, in the frequency dependence of the attenuation, above 0.4THz, that we ascribe to a breakdown of Herring processes.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
An Odds Ratio Based Inference Engine
Authors:
David S. Vaughan,
Bruce M. Perrin,
Robert M. Yadrick,
Peter D. Holden,
Karl G. Kempf
Abstract:
Expert systems applications that involve uncertain inference can be represented by a multidimensional contingency table. These tables offer a general approach to inferring with uncertain evidence, because they can embody any form of association between any number of pieces of evidence and conclusions. (Simpler models may be required, however, if the number of pieces of evidence bearing on a conclu…
▽ More
Expert systems applications that involve uncertain inference can be represented by a multidimensional contingency table. These tables offer a general approach to inferring with uncertain evidence, because they can embody any form of association between any number of pieces of evidence and conclusions. (Simpler models may be required, however, if the number of pieces of evidence bearing on a conclusion is large.) This paper presents a method of using these tables to make uncertain inferences without assumptions of conditional independence among pieces of evidence or heuristic combining rules. As evidence is accumulated, new joint probabilities are calculated so as to maintain any dependencies among the pieces of evidence that are found in the contingency table. The new conditional probability of the conclusion is then calculated directly from these new joint probabilities and the conditional probabilities in the contingency table.
△ Less
Submitted 27 March, 2013;
originally announced April 2013.
-
Evaluation of Uncertain Inference Models I: PROSPECTOR
Authors:
Robert M. Yadrick,
Bruce M. Perrin,
David S. Vaughan,
Peter D. Holden,
Karl G. Kempf
Abstract:
This paper examines the accuracy of the PROSPECTOR model for uncertain reasoning. PROSPECTOR's solutions for a large number of computer-generated inference networks were compared to those obtained from probability theory and minimum cross-entropy calculations. PROSPECTOR's answers were generally accurate for a restricted subset of problems that are consistent with its assumptions. However, even wi…
▽ More
This paper examines the accuracy of the PROSPECTOR model for uncertain reasoning. PROSPECTOR's solutions for a large number of computer-generated inference networks were compared to those obtained from probability theory and minimum cross-entropy calculations. PROSPECTOR's answers were generally accurate for a restricted subset of problems that are consistent with its assumptions. However, even within this subset, we identified conditions under which PROSPECTOR's performance deteriorates.
△ Less
Submitted 27 March, 2013;
originally announced April 2013.
-
The Role of Tuning Uncertain Inference Systems
Authors:
Ben P. Wise,
Bruce M. Perrin,
David S. Vaughan,
Robert M. Yadrick
Abstract:
This study examined the effects of "tuning" the parameters of the incremental function of MYCIN, the independent function of PROSPECTOR, a probability model that assumes independence, and a simple additive linear equation. me parameters of each of these models were optimized to provide solutions which most nearly approximated those from a full probability model for a large set of simple networks.…
▽ More
This study examined the effects of "tuning" the parameters of the incremental function of MYCIN, the independent function of PROSPECTOR, a probability model that assumes independence, and a simple additive linear equation. me parameters of each of these models were optimized to provide solutions which most nearly approximated those from a full probability model for a large set of simple networks. Surprisingly, MYCIN, PROSPECTOR, and the linear equation performed equivalently; the independence model was clearly more accurate on the networks studied.
△ Less
Submitted 27 March, 2013;
originally announced April 2013.
-
Comparing Expert Systems Built Using Different Uncertain Inference Systems
Authors:
David S. Vaughan,
Bruce M. Perrin,
Robert M. Yadrick
Abstract:
This study compares the inherent intuitiveness or usability of the most prominent methods for managing uncertainty in expert systems, including those of EMYCIN, PROSPECTOR, Dempster-Shafer theory, fuzzy set theory, simplified probability theory (assuming marginal independence), and linear regression using probability estimates. Participants in the study gained experience in a simple, hypothetical…
▽ More
This study compares the inherent intuitiveness or usability of the most prominent methods for managing uncertainty in expert systems, including those of EMYCIN, PROSPECTOR, Dempster-Shafer theory, fuzzy set theory, simplified probability theory (assuming marginal independence), and linear regression using probability estimates. Participants in the study gained experience in a simple, hypothetical problem domain through a series of learning trials. They were then randomly assigned to develop an expert system using one of the six Uncertain Inference Systems (UISs) listed above. Performance of the resulting systems was then compared. The results indicate that the systems based on the PROSPECTOR and EMYCIN models were significantly less accurate for certain types of problems compared to systems based on the other UISs. Possible reasons for these differences are discussed.
△ Less
Submitted 27 March, 2013;
originally announced April 2013.
-
Effect of picosecond strain pulses on thin layers of the ferromagnetic semiconductor (Ga,Mn)(As,P)
Authors:
L. Thevenard,
E. Peronne,
C. Gourdon,
C. Testelin,
M. Cubukcu,
E. Charron,
S. Vincent,
A. Lemaitre,
B. Perrin
Abstract:
The effect of picosecond acoustic strain pulses (ps-ASP) on a thin layer of (Ga,Mn)As co-doped with phosphorus was probed using magneto-optical Kerr effect (MOKE). A transient MOKE signal followed by low amplitude oscillations was evidenced, with a strong dependence on applied magnetic field, temperature and ps-ASP amplitude. Careful interferometric measurement of the layer's thickness variation i…
▽ More
The effect of picosecond acoustic strain pulses (ps-ASP) on a thin layer of (Ga,Mn)As co-doped with phosphorus was probed using magneto-optical Kerr effect (MOKE). A transient MOKE signal followed by low amplitude oscillations was evidenced, with a strong dependence on applied magnetic field, temperature and ps-ASP amplitude. Careful interferometric measurement of the layer's thickness variation induced by the ps-ASP allowed us to model very accurately the resulting signal, and interpret it as the strain modulated reflectivity (differing for $σ_{\pm}$ probe polarizations), independently from dynamic magnetization effects.
△ Less
Submitted 21 July, 2010;
originally announced July 2010.
-
Equation of State, Stability, Anisotropy and Nonlinear Elasticity of Diamond-Cubic (ZB) Silicon by Phonon Imaging at High Pressure
Authors:
F. Decremps,
L. Belliard,
M. Gauthier,
B. Perrin
Abstract:
Experimental phonon imaging in diamond anvils cell is demonstrated to be an adequate tool to extract the complete set of elastic constants of single-crystalline silicon up to the ZB$\rightarrow β-$Sn transition (10 GPa). Contrary to what was commonly admitted, we demonstrate that the development of the strain-energy density in terms of strains cannot be stopped, for silicon, after the terms contai…
▽ More
Experimental phonon imaging in diamond anvils cell is demonstrated to be an adequate tool to extract the complete set of elastic constants of single-crystalline silicon up to the ZB$\rightarrow β-$Sn transition (10 GPa). Contrary to what was commonly admitted, we demonstrate that the development of the strain-energy density in terms of strains cannot be stopped, for silicon, after the terms containing the third-order elastic constants. Nonlinear elasticity, degree of anisotropy and pressure-induced mechanical stability of the cubic silicon structure are thus revisited and investigated in more detail.
△ Less
Submitted 16 July, 2010;
originally announced July 2010.
-
Sub-Terahertz Monochromatic Transduction with Semiconductor Acoustic Nanodevices
Authors:
Agnes Huynh,
Bernard Perrin,
N. D. Lanzillotti Kimura,
Bernard Jusserand,
A. Fainstein,
Aristide Lemaitre
Abstract:
We demonstrate semiconductor superlattices or nanocavities as narrow band acoustic transducers in the sub-terahertz range. Using picosecond ultrasonics experiments in the transmission geometry with pump and probe incident on opposite sides of the thick substrate, phonon generation and detection processes are fully decoupled. Generating with the semiconductor device and probing on the metal, we s…
▽ More
We demonstrate semiconductor superlattices or nanocavities as narrow band acoustic transducers in the sub-terahertz range. Using picosecond ultrasonics experiments in the transmission geometry with pump and probe incident on opposite sides of the thick substrate, phonon generation and detection processes are fully decoupled. Generating with the semiconductor device and probing on the metal, we show that both superlattices and nanocavities generate spectrally narrow wavepackets of coherent phonons with frequencies in the vicinity of the zone center and time durations in the nanosecond range, qualitatively different from picosecond broadband pulses usually involved in picosecond acoustics with metal generators. Generating in the metal and probing on the nanoacoustic device, we furthermore evidence that both nanostructured semiconductor devices may be used as very sensitive and spectrally selective detectors.
△ Less
Submitted 14 March, 2008;
originally announced March 2008.
-
Sound velocity and absorption measurements under high pressure using picosecond ultrasonics in diamond anvil cell. Application to the stability study of AlPdMn
Authors:
Frederic Decremps,
Laurent Belliard,
Bernard Perrin,
Michel Gauthier
Abstract:
We report an innovative high pressure method combining the diamond anvil cell device with the technique of picosecond ultrasonics. Such an approach allows to accurately measure sound velocity and attenuation of solids and liquids under pressure of tens of GPa, overcoming all the drawbacks of traditional techniques. The power of this new experimental technique is demonstrated in studies of lattic…
▽ More
We report an innovative high pressure method combining the diamond anvil cell device with the technique of picosecond ultrasonics. Such an approach allows to accurately measure sound velocity and attenuation of solids and liquids under pressure of tens of GPa, overcoming all the drawbacks of traditional techniques. The power of this new experimental technique is demonstrated in studies of lattice dynamics, stability domain and relaxation process in a metallic sample, a perfect single-grain AlPdMn quasicrystal, and rare gas, neon and argon. Application to the study of defect-induced lattice stability in AlPdMn up to 30 GPa is proposed. The present work has potential for application in areas ranging from fundamental problems in physics of solid and liquid state, which in turn could be beneficial for various other scientific fields as Earth and planetary science or material research.
△ Less
Submitted 17 July, 2007;
originally announced July 2007.
-
Granular Avalanches in Fluids
Authors:
S. Courrech du Pont,
P. Gondret,
B. Perrin,
M. Rabaud
Abstract:
Three regimes of granular avalanches in fluids are put in light depending on the Stokes number St which prescribes the relative importance of grain inertia and fluid viscous effects, and on the grain/fluid density ratio r. In gas (r >> 1 and St > 1, e.g., the dry case), the amplitude and time duration of avalanches do not depend on any fluid effect. In liquids (r ~ 1), for decreasing St, the amp…
▽ More
Three regimes of granular avalanches in fluids are put in light depending on the Stokes number St which prescribes the relative importance of grain inertia and fluid viscous effects, and on the grain/fluid density ratio r. In gas (r >> 1 and St > 1, e.g., the dry case), the amplitude and time duration of avalanches do not depend on any fluid effect. In liquids (r ~ 1), for decreasing St, the amplitude decreases and the time duration increases, exploring an inertial regime and a viscous regime. These regimes are described by the analysis of the elementary motion of one grain.
△ Less
Submitted 3 September, 2002;
originally announced September 2002.
-
Wall effects on granular heap stability
Authors:
S. Courrech du Pont,
P. Gondret,
B. Perrin,
M. Rabaud
Abstract:
We investigate the effects of lateral walls on the angle of movement and on the angle of repose of a granular pile. Our experimental results for beads immersed in water are similar to previous results obtained in air and to recent numerical simulations. All of these results, showing an increase of pile angles with a decreasing gap width, are explained by a model based on the redirection of stres…
▽ More
We investigate the effects of lateral walls on the angle of movement and on the angle of repose of a granular pile. Our experimental results for beads immersed in water are similar to previous results obtained in air and to recent numerical simulations. All of these results, showing an increase of pile angles with a decreasing gap width, are explained by a model based on the redirection of stresses through the granular media. Two regimes are observed depending on the bead diameter. For large beads, the range of wall effects corresponds to a constant number of beads whereas it corresponds to a constant characteristic length for small beads as they aggregate via van der Waals forces.
△ Less
Submitted 10 December, 2002; v1 submitted 2 September, 2002;
originally announced September 2002.