Showing 1–17 of 17 results for author: Pernechele, C

The commissioning phase

Authors: F. Bortoletto, S. Benetti, G. Bonanno, C. Bonoli, P. Bruno, C. Carmona, P. Conconi, L. Corcione, R. Cosentino, M. D'Alessandro, R. Dominguez, D. Fantinel, A. Galli, D. Gardiol, A. Ghedina, F. Ghinassi, E. Giro, C. Gonzales, NI. Gonzalez, J. Guerra, A. Magazzù, D. Mancini, E. Marchetti, J. Medina, F. Pasian , et al. (12 additional authors not shown)

Abstract: In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks… ▽ More In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks, data-nets, power and controls) already mounted was started in the same period. Starting from June 1998 (telescope first-light date) the telescope went gradually in use, several nights per week, in order to test and tune the tracking and pointing system, the optics and the first derotator system (Nasmyth A station). At the end of the commissioning period and with the first scientific instruments mounted (April 1999) also the first routinely observations started. In this moment the telescope is doing astronomy 80% of time and the complete first-light instrumentation is mounted. △ Less

Submitted 21 February, 2023; originally announced February 2023.

Comments: 14 pages

Journal ref: Scientific dedication of the Telescopio Nazionale Galileo - proc. CNNA-INAF Meeting, La Palma (Canary Islands, E), 3-5 November 2000 - (2000) p.114

Lunar Gravitational-Wave Antenna

Authors: Jan Harms, Filippo Ambrosino, Lorella Angelini, Valentina Braito, Marica Branchesi, Enzo Brocato, Enrico Cappellaro, Eugenio Coccia, Michael Coughlin, Roberto Della Ceca, Massimo Della Valle, Cesare Dionisio, Costanzo Federico, Michelangelo Formisano, Alessandro Frigeri, Aniello Grado, Luca Izzo, Augusto Marcelli, Andrea Maselli, Marco Olivieri, Claudio Pernechele, Andrea Possenti, Samuele Ronchini, Roberto Serafinelli, Paola Severgnini , et al. (29 additional authors not shown)

Abstract: Monitoring of vibrational eigenmodes of an elastic body excited by gravitational waves was one of the first concepts proposed for the detection of gravitational waves. At laboratory scale, these experiments became known as resonant-bar detectors first developed by Joseph Weber in the 1960s. Due to the dimensions of these bars, the targeted signal frequencies were in the kHz range. Weber also point… ▽ More Monitoring of vibrational eigenmodes of an elastic body excited by gravitational waves was one of the first concepts proposed for the detection of gravitational waves. At laboratory scale, these experiments became known as resonant-bar detectors first developed by Joseph Weber in the 1960s. Due to the dimensions of these bars, the targeted signal frequencies were in the kHz range. Weber also pointed out that monitoring of vibrations of Earth or Moon could reveal gravitational waves in the mHz band. His Lunar Surface Gravimeter experiment deployed on the Moon by the Apollo 17 crew had a technical failure rendering the data useless. In this article, we revisit the idea and propose a Lunar Gravitational-Wave Antenna (LGWA). We find that LGWA could become an important partner observatory for joint observations with the space-borne, laser-interferometric detector LISA, and at the same time contribute an independent science case due to LGWA's unique features. Technical challenges need to be overcome for the deployment of the experiment, and development of inertial vibration sensor technology lays out a future path for this exciting detector concept. △ Less

Submitted 26 October, 2020; originally announced October 2020.

Comments: 29 pages, 17 figures

Development of the Warm Astrometric Mask for MICADO astrometry calibration

Authors: Gabriele Rodeghiero, Miriam Sawczuck, Jörg Uwe Pott, Martin Glück, Enrico Biancalani, Maximilian Häberle, Hannes Reichert, Claudio Pernechele, Vianak Naranjo, Javier Moreno Ventas, Peter Bizenberger, Luigi Lessio

Abstract: The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test cam… ▽ More The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test campaign on a prototype mask (scale 1:2) has probed the manufacturing precision down to $\sim$ 50nm/1mm scale, leading to a relative precision $δσ\sim 5e-5$. The assessed manufacturing precision indicates that an astrometric relative precision of $δσ\sim 5e-5 = \frac{50μas}{1 arcsec}$ is in principle achievable, disclosing $μ$arcsec near infrared astrometry behind an extremely large telescope. The impact of $\sim$ 10-100 nm error residuals on the mask pinholes position is tolerable at a calibration level as confirmed by ray tracing simulations of realistic MICADO distortion patterns affected by mid spatial frequencies residuals. We demonstrated that the MICADO astrometric precision of 50 $μ$as is achievable also in presence of a mid spatial frequencies pattern and manufacturing errors of the WAM by fitting the distorted WAM pattern seen through the instrument with a 10$^{th}$ order Legendre polynomial. △ Less

Submitted 2 February, 2019; originally announced February 2019.

Depth calibrations of a 2D-CMOS-based partially coherent light interferometer

Authors: C. Pernechele, S. Chinellato, F. Manzan, S. Carmignato, A. Voltan

Abstract: This work concerns the development of a 3D measuring system able to realize noncontact surface topography with millimetric depth-range and micrometric resolutions both in the spatial and depth axes. The optical concept is based on the well known low coherence interferometry (LCI) technique. The most widespread set-up of such technique is that of measuring only a point at a time with a 2D scanning… ▽ More This work concerns the development of a 3D measuring system able to realize noncontact surface topography with millimetric depth-range and micrometric resolutions both in the spatial and depth axes. The optical concept is based on the well known low coherence interferometry (LCI) technique. The most widespread set-up of such technique is that of measuring only a point at a time with a 2D scanning system that permits the measure on an area. The novel concept of our instrument is based on the use of a 2D sensor (CMOS), where every single pixel measures a point on the object and this permits a fast analysis on square centimeters areas without the need for any precise (and expensive) scanning system. We present here accurate depth calibration which shows the potentiality of this instrument. △ Less

Submitted 23 August, 2018; originally announced August 2018.

Comments: Pg. 376-379 ISBN: 9780955308260

Journal ref: EUSPEN 9th International Conference of the European Society for Precision Engineering and Nanotechnology, 2-5 June 2009, San Sebastian, Spain

Thermally activated magnetization reversal in bulk BiFe0.5Mn0.5O3

Authors: Davide Delmonte, Francesco Mezzadri, Chiara Pernechele, Gianluca Calestani, Gabriele Spina, Marco Lantieri, Massimo Solzi, Riccardo Cabassi, Fulvio Bolzoni, Andrea Migliori, Clemens Ritter, Edmondo Gilioli

Abstract: We report on the synthesis and characterization of BiFe0.5Mn0.5O3, a potential type-I multiferroic compound displaying temperature induced magnetization reversal. Bulk samples were obtained by means of solid state reaction carried out under the application of hydrostatic pressure at 6 GPa and 1100°C. The crystal structure is an highly distorted perovskite with no cation order on the B site, where,… ▽ More We report on the synthesis and characterization of BiFe0.5Mn0.5O3, a potential type-I multiferroic compound displaying temperature induced magnetization reversal. Bulk samples were obtained by means of solid state reaction carried out under the application of hydrostatic pressure at 6 GPa and 1100°C. The crystal structure is an highly distorted perovskite with no cation order on the B site, where, besides a complex scheme of tilt and rotations of the TM-O6 octahedra, large off-centering of the bismuth ions is detected. Below T1 = 420 K the compound undergoes a first weak ferromagnetic transition related to the ordering of iron rich clusters. At lower temperatures (just below RT) two distinct thermally activated mechanisms are superimposed, inducing at first an enhancement of the magnetization at T2 = 288 K, then a spontaneous reversal process centered at T3 = 250 K, finally giving rise to a negative response. The application of fields higher than 1500 Oe suppresses the process, yielding a ferromagnetic like behaviour. The complementary use of SQuID magnetometry and Mössbauer spectroscopy allowed the interpretation of the overall magnetic behaviour in terms of an uncompensated weak competitive coupling between non-equivalent clusters of interactions characterized by different critical temperatures and resultant magnetizations. PACS numbers: 75.85.+t, 75.60.Jk, 76.80.+y, 75.30.Et, 75.30.Kz △ Less

Submitted 28 June, 2013; v1 submitted 28 February, 2013; originally announced February 2013.

Comments: 30 pages, 13 figures

Conditions for the growth of smooth La0.7Sr0.3MnO3 thin films by pulsed electron ablation

Authors: Patrizio Graziosi, Mirko Prezioso, Alessandro Gambardella, Catherine Kitts, Rajib Kumar Rakshit, Alberto Riminucci, Ilaria Bergenti, Francesco Borgatti, Chiara Pernechele, Massimo Solzi, Daniele Pullini, David Jeronimo Busquets-Mataix, Valentin Alek Dediu

Abstract: We report on the optimisation of the growth conditions of manganite La0.7Sr0.3MnO3 (LSMO) thin films prepared by Channel Spark Ablation (CSA). CSA belongs to pulsed electron deposition methods and its energetic and deposition parameters are quite similar to those of pulsed laser deposition. The method has been already proven to provide manganite films with good magnetic properties, but the films w… ▽ More We report on the optimisation of the growth conditions of manganite La0.7Sr0.3MnO3 (LSMO) thin films prepared by Channel Spark Ablation (CSA). CSA belongs to pulsed electron deposition methods and its energetic and deposition parameters are quite similar to those of pulsed laser deposition. The method has been already proven to provide manganite films with good magnetic properties, but the films were generally relatively rough (a few nm coarseness). Here we show that increasing the oxygen deposition pressure with respect to previously used regimes, reduces the surface roughness down to unit cell size while maintaining a robust magnetism. We analyse in detail the effect of other deposition parameters, like accelerating voltage, discharging energy, and temperature and provide on this basis a set of optimal conditions for the growth of atomically flat films. The thicknesses for which atomically flat surface was achieved is as high as about 10-20 nm, corresponding to films with room temperature magnetism. We believe such magnetic layers represent appealing and suitable electrodes for various spintronic devices. △ Less

Submitted 28 December, 2012; originally announced December 2012.

Comments: original paper, thin film optimization, 25 pages, 9 figures

Hanle effect missing in a prototypical organic spintronic device

Authors: Alberto Riminucci, Mirko Prezioso, Chiara Pernechele, Patrizio Graziosi, Ilaria Bergenti, Raimondo Cecchini, Marco Calbucci, Massimo Solzi, Alek Dediu

Abstract: We investigate spin precession (Hanle effect) in the prototypical organic spintronic giant magnetoresistance (GMR) device La0.7Sr0.3MnO3(LSMO)/tris(8-hydroxyquinoline)(Alq3)/AlOx/Co. The Hanle effect is not observed in measurements taken by swee** a magnetic field at different angles from the plane of the device. As possible explanations we discuss the tilting out of plane of the magnetization o… ▽ More We investigate spin precession (Hanle effect) in the prototypical organic spintronic giant magnetoresistance (GMR) device La0.7Sr0.3MnO3(LSMO)/tris(8-hydroxyquinoline)(Alq3)/AlOx/Co. The Hanle effect is not observed in measurements taken by swee** a magnetic field at different angles from the plane of the device. As possible explanations we discuss the tilting out of plane of the magnetization of the electrodes, exceptionally high mobility or hot spots. Our results call for a greater understanding of spin injection and transport in such devices. △ Less

Submitted 4 December, 2012; v1 submitted 16 November, 2012; originally announced November 2012.

Interface effects on an ultrathin Co film in multilayers based on the organic semiconductor Alq3

Authors: A. A. Sidorenko, C. Pernechele, P. Lupo, M. Ghidini, M. Solzi, R. De Renzi, I. Bergenti, P. Graziosi, V. Dediu, L. Hueso, A. T. Hindmarch

Abstract: The effect of the AlOx barrier thickness on magnetic and morphological properties of Ta/Co/(AlOx)/Alq3/Si hybrid structures was systematically studied by means of atomic force microscopy, SQUID magnetometry and nuclear magnetic resonance (NMR). All used techniques pointed out that the barrier thickness of 2 nm is required to obtain a magnetically good cobalt layer on top of Alq3. 59Co NMR measurem… ▽ More The effect of the AlOx barrier thickness on magnetic and morphological properties of Ta/Co/(AlOx)/Alq3/Si hybrid structures was systematically studied by means of atomic force microscopy, SQUID magnetometry and nuclear magnetic resonance (NMR). All used techniques pointed out that the barrier thickness of 2 nm is required to obtain a magnetically good cobalt layer on top of Alq3. 59Co NMR measurements revealed that the AlOx barrier gives rise to the formation of an interface layer with "defective" cobalt favouring growth of "bulk" cobalt with good magnetic properties. △ Less

Submitted 19 October, 2010; originally announced October 2010.

Comments: 4 pages, Accepted for publication in Applied Physics Letters

Journal ref: Appl. Phys. Lett. 97, 162509 (2010)

Experimental verification of the feasibility of a quantum channel between Space and Earth

Authors: Paolo Villoresi, Thomas Jennewein, Fabrizio Tamburini, Markus Aspelmeyer, Cristian Bonato, Rupert Ursin, Claudio Pernechele, Vincenza Luceri, Giuseppe Bianco, Anton Zeilinger, Cesare Barbieri

Abstract: Extending quantum communication to Space environments would enable to perform fundamental experiments on quantum physics as well as applications of quantum information at planetary and interplanetary scales. Here, we report the first experimental implementation of a scheme for single-photon exchange between a satellite and an Earth-based station. We built an experiment that mimics a single photo… ▽ More Extending quantum communication to Space environments would enable to perform fundamental experiments on quantum physics as well as applications of quantum information at planetary and interplanetary scales. Here, we report the first experimental implementation of a scheme for single-photon exchange between a satellite and an Earth-based station. We built an experiment that mimics a single photon source on a satellite, exploiting the telescope at the Matera Laser Ranging Observatory of the Italian Space Agency to detect the transmitted photons. Weak laser pulses, emitted by the ground-based station, are directed towards a satellite equipped with cube-corner retroreflectors. These reflect a small portion of the pulse, with an average of less-than-one photon per pulse directed to our receiver, as required for the faint-pulse quantum communication. We were able to detect returns from satellite Ajisai, a low-earth orbit geodetic satellite, whose orbit has a perigee height of 1485 km. △ Less

Submitted 12 March, 2008; originally announced March 2008.

Comments: 22 pages, 5 figures

Journal ref: New Journal of Physics 10, 033038 (2008)

Polarimetric survey of asteroids with the Asiago telescope

Authors: S. Fornasier, I. N. Belskaya, Yu. G. Shkuratov, C. Pernechele, C. Barbieri, E. Giro, H. Navasardyan

Abstract: We present the first results of an asteroid photo--polarimetry program started at Asiago--Cima Ekar Observatory. The aim of our survey is to estimate diversity in polarimetric properties of asteroids belonging to different taxonomic and dynamical classes. The data were obtained with the polarization analyser placed inside the Faint Object Spectrographic Camera (AFOSC) of the 1.8m telescope. This… ▽ More We present the first results of an asteroid photo--polarimetry program started at Asiago--Cima Ekar Observatory. The aim of our survey is to estimate diversity in polarimetric properties of asteroids belonging to different taxonomic and dynamical classes. The data were obtained with the polarization analyser placed inside the Faint Object Spectrographic Camera (AFOSC) of the 1.8m telescope. This instrument allows simultaneous measurements of the two first Stokes parameters without any lambda/2 retarding plate. Our survey began in 2002, and up to now we have obtained data on a sample of 36 asteroids; most of them are being investigated with the polarimetric technique for the first time. Combining our data with those already available in literature, we present an estimate of the inversion angle for 7 asteroids in this paper. Furthermore, we present the polarimetric measurements of the rare asteroid classes belonging to the A and D types and a detailed VRI observations at extremely small phase angles of the low albedo asteroid 1021 Flammario △ Less

Submitted 28 April, 2006; originally announced April 2006.

Comments: 8 pages, paper accepted for pubblication on A&A

How to improve the High Frequency capabilities of SRT

Authors: T. Pisanu, M. Morsiani, C. Pernechele, F. Buffa, G. Vargiu

Abstract: The SRT (Sardinia Radio Telescope) is a general purpose, fully steerable, active surface equipped, 64 meters antenna, which is in an advanced construction state near Cagliari (Sardinia - Italy). It will be an antenna which could improve a lot the performances of the EVN network, particularly at frequencies higher than 22 GHz. The main antenna geometry consist of a shaped reflector system pair, b… ▽ More The SRT (Sardinia Radio Telescope) is a general purpose, fully steerable, active surface equipped, 64 meters antenna, which is in an advanced construction state near Cagliari (Sardinia - Italy). It will be an antenna which could improve a lot the performances of the EVN network, particularly at frequencies higher than 22 GHz. The main antenna geometry consist of a shaped reflector system pair, based on the classical parabola-ellipse Gregorian configuration. It is designed to be able to operate with a good efficiency in a frequency range from 300 MHz up to 100 GHz. This frequency range, is divided in two parts which define also two antenna operational modes, one up to 22 GHz with a minimal amount of accessory instrumentation, and the other up to 100 GHz with a full complement of instrumentation. The goal is to make it possible to build a telescope operable up to 22 GHz, and then upgrade it at a future date to operate at frequencies up to 100 GHz. In order to get these goals, the SRT Metrology group is studying and develo** different types of strategies, instrumentation, and techniques for measuring and reducing the various components of pointing and efficiency errors, taking advantage also from experiences developed in other radio telescopes, like GBT (Green Bank Telescope, USA), LMT (Large Millimiter Telescope, MEX), and IRAM (Institut de Radio Astronomie Millimetrique, Fr). Many of those system will be installed and tested at the 32 meters radio-telescope in Medicina (Bologna), before of their implementation on SRT. △ Less

Submitted 30 December, 2004; originally announced December 2004.

Comments: 2 pages. no figures. Proceedings of the 7th European VLBI Network Symposium held in Toledo, Spain on October 12-15, 2004. Editors: R. Bachiller, F. Colomer, J.-F. Desmurs, P. de Vicente (Observatorio Astronomico Nacional), p. 293-294. Needs evn2004.cls

Space-to-ground quantum-communication using an optical ground station: a feasibility study

Authors: P. Villoresi, F. Tamburini, M. Aspelmeyer, T. Jennewein, R. Ursin, C. Pernechele, G. Bianco, A. Zeilinger, C. Barbieri

Abstract: We have tested the experimental prerequisites for a Space-to-Ground quantum communication link between satellites and an optical ground station. The feasibility of our ideas is being assessed using the facilities of the ASI Matera Laser Ranging Observatory (MLRO). Specific emphasis is put on the necessary technological modifications of the existing infrastructure to achieve single photon recepti… ▽ More We have tested the experimental prerequisites for a Space-to-Ground quantum communication link between satellites and an optical ground station. The feasibility of our ideas is being assessed using the facilities of the ASI Matera Laser Ranging Observatory (MLRO). Specific emphasis is put on the necessary technological modifications of the existing infrastructure to achieve single photon reception from an orbiting satellite. △ Less

Submitted 10 August, 2004; originally announced August 2004.

Comments: 8 pages 5 figures, SPIE proceedings Quantum Communications and Quantum Imaging II conference in Denver, July 2004

Polarimetric evolution of V838 Mon

Authors: S. Desidera, E. Giro, U. Munari, Y. S. Efimov, A. Henden, S. Benetti, T. Tomov, A. Bianchini, C. Pernechele

Abstract: We present the results of our polarimetric and spectropolarimetric monitoring of V838 Monocerotis, performed at Asiago and Crimean observatories during and after the multiple outbursts that occurred in January-March 2002. The polarization of the object is mainly due to interstellar polarization (P=2.48%). Intrinsic polarization up to 0.7% at 5000 A is present during the second maximum of the o… ▽ More We present the results of our polarimetric and spectropolarimetric monitoring of V838 Monocerotis, performed at Asiago and Crimean observatories during and after the multiple outbursts that occurred in January-March 2002. The polarization of the object is mainly due to interstellar polarization (P=2.48%). Intrinsic polarization up to 0.7% at 5000 A is present during the second maximum of the object (February 2002). This intrinsic component increases toward shorter wavelengths but our limited spectral coverage (5000-7500 A) does not allow conclusive inferences about its origin. A strong depolarization across the Halpha profile is observed. The interstellar polarization gives a lower limit to the reddening of E(B-V)>0.28, with E(B-V)=0.5 being the most probable value. A normal ratio of total to selective absorption (R_V=3.22+-0.17) was derived from the wavelength of maximum interstellar polarization. This suggests a low (if any) contribution by circumstellar material with peculiar dust to gas ratio. A polarimetric map of a portion of the light echo shows a complex polarization distribution reaching P_max=45%. △ Less

Submitted 3 October, 2003; originally announced October 2003.

Comments: 10 pages, 8 figures, A&A, in press

Journal ref: Astron.Astrophys. 414 (2004) 591-600

Spatially-resolved spectrophotometric analysis and modelling of the Superantennae

Authors: Stefano Berta, Jacopo Fritz, Alberto Franceschini, Alessandro Bressan, Claudio Pernechele

Abstract: We have performed spatially-resolved spectroscopy of the double-nucleated Ultra-Luminous Infrared Galaxy IRAS 19254-7245, ``the Superantennae'', along the line connecting the two nuclei. These data are analysed with a spectral synthesis code, to derive the star formation and extinction properties of the galaxy. The star formation history (SFH) of the two nuclei is similarly characterized by two… ▽ More We have performed spatially-resolved spectroscopy of the double-nucleated Ultra-Luminous Infrared Galaxy IRAS 19254-7245, ``the Superantennae'', along the line connecting the two nuclei. These data are analysed with a spectral synthesis code, to derive the star formation and extinction properties of the galaxy. The star formation history (SFH) of the two nuclei is similarly characterized by two different main episodes: a recent burst, responsible of the observed emission lines, and an older one, occurred roughly 1 Gyr ago. We tentatively associate this bimodal SFH with a double encounter in the dynamical history of the merger. We have complemented our study with a detailed analysis of the broad band spectral energy distribution of the Superantennae, built from published photometry, providing the separate optical-to-mm SEDs of the two nuclei. Our analysis shows that: a) the southern nucleus is responsible for about 80% of the total infrared luminosity of the system, b) the L-band luminosity in the southern nucleus is dominated by the emission from an obscured AGN, providing about 40 to 50% of the bolometric flux between 8 and 1000 microns; c) the northern nucleus does not show evidence for AGN emission and appears to be in a post-starburst phase. As for the relative strengths of the AGN and starburst components, we find that, while they are comparable at FIR and sub-mm wavelengths, in the radio the Sy2 emission dominates by an order of magnitude the starburst. △ Less

Submitted 12 March, 2003; originally announced March 2003.

Comments: 18 pages. Accepted for publication on A&A

Journal ref: Astron.Astrophys. 403 (2003) 119-134

Bragg gratings in multi-mode fiber optics for wavelength calibration of GAIA and RAVE spectra

Authors: C. Pernechele, U. Munari

Abstract: We propose a new technique, the use of FBGs (fiber Bragg gratings), for accurate, easy and low cost wavelength calibration of GAIA, RAVE and follow-ups spectra at local Observatories. FBGs mark the spectra with absorption lines, freely defined in number and position during the fibers manufacturing. The process goes in parallel with the science exposure and through the same optical train and path… ▽ More We propose a new technique, the use of FBGs (fiber Bragg gratings), for accurate, easy and low cost wavelength calibration of GAIA, RAVE and follow-ups spectra at local Observatories. FBGs mark the spectra with absorption lines, freely defined in number and position during the fibers manufacturing. The process goes in parallel with the science exposure and through the same optical train and path, thus ensuring the maximum return in wavelength calibration accuracy. Plans to manufacture and test FBGs for the CaII/Paschen region are underway at the Astronomical Observatory of Padova. △ Less

Submitted 20 November, 2002; originally announced November 2002.

Comments: in "GAIA Spectroscopy, Science and Technology", U.Munari ed., ASP Conf. Series, in press

Spectro-Polarimetric search for hidden AGNs in four southern Ultraluminous Infrared Galaxies

Authors: C. Pernechele, S. Berta, A. Marconi, C. Bonoli, A. Bressan, A. Franceschini, J. Fritz, E. Giro

Abstract: We report on a spectro-polarimetric analysis of four southern Ultra-Luminous Infrared Galaxies (ULIRGs), aimed at constraining the presence of hidden broad AGN lines. For IRAS 19254--7245 ({\sl The Superantennae}) we find evidence for a significant level of polarized light in the H$α$ line with FWHM$>$2300 km/s. Some degree of polarization is also detected in IRAS 20551-4250, though with lower s… ▽ More We report on a spectro-polarimetric analysis of four southern Ultra-Luminous Infrared Galaxies (ULIRGs), aimed at constraining the presence of hidden broad AGN lines. For IRAS 19254--7245 ({\sl The Superantennae}) we find evidence for a significant level of polarized light in the H$α$ line with FWHM$>$2300 km/s. Some degree of polarization is also detected in IRAS 20551-4250, though with lower significance. In the two other sources (IRAS 20100--4156 and IRAS 22491--1808) no polarized signals are detected. Although it is unclear from the present data if the origin of polarization is due to reflected light from an AGN or more simply to dichroic transmission by a dust slab, we find interesting correlation between the presence of polarized components in the optical spectra and independent evidence for AGN emissions in hard X-rays and the far-IR. △ Less

Submitted 31 October, 2002; originally announced October 2002.

Comments: 5 pages, 4 figures, accepted for publications on MNRAS Letters

Preliminary design of a NIR prime focus corrector for the Galileo Telescope

Authors: Claudio Pernechele, Favio Bortoletto, Paolo Conconi, Daniele Gardiol, Emilio Molinari, Filippo Zerbi

Abstract: In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which… ▽ More In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which are aspherical. The first lens diameters are, respectively, of 140 mm and 320 mm for the two kind of detectors. For both designs the telescope pupil is deliberately not re-imaged, and therefore it will not be possible to insert a cold stop. For such a reason particular care has been dedicated to the telescope thermal background study, in order to optimise the baffling system. The optics is able to correct fields of 11' x 11' and of 60'x60', depending on the design. It should be considered that the particular geometry of the focal plane array mosaic does not permit a full exploitation of the entire field, being based on a combination of four detectors. The selected chips are HgCdTe manufactured by Rockwell, i.e. Hawaii I in the 1k x 1k case and Hawaii II in the 2k x 2k case. △ Less

Submitted 6 April, 2000; originally announced April 2000.

Comments: 7 pages, SPIE proceedings