-
The impact of finite span and wing-tip vortices on a turbulent NACA0012 wing
Authors:
Siavash Toosi,
Adam Peplinski,
Philipp Schlatter,
Ricardo Vinuesa
Abstract:
High-fidelity simulations are conducted to investigate the turbulent boundary layers around a finite-span NACA0012 wing with a rounded wing-tip geometry at a chord-based Reynolds number of $Re_c=200\,000$ and at various angles of attack up to $10^\circ$. The study aims to discern the differences between the boundary layers on the finite-span wing and those on infinite-span wings at equivalent angl…
▽ More
High-fidelity simulations are conducted to investigate the turbulent boundary layers around a finite-span NACA0012 wing with a rounded wing-tip geometry at a chord-based Reynolds number of $Re_c=200\,000$ and at various angles of attack up to $10^\circ$. The study aims to discern the differences between the boundary layers on the finite-span wing and those on infinite-span wings at equivalent angles of attack. The finite-span boundary layers exhibit: (i) an altered streamwise and a non-zero spanwise pressure gradient as a result of the variable downwash induced by the wing-tip vortices (an inviscid effect typical of finite-span wings); (ii) differences in the flow history at different wall-normal distances, caused by the variable flow angle in the wall-normal direction (due to constant pressure gradients and variable momentum normal to the wall); (iii) laminar flow entrainment into the turbulent boundary layers near the wing tip (due to a laminar/turbulent interface); and (iv) variations in boundary layer thickness across the span, attributed to the variable wall-normal velocity in that direction (a primarily inviscid effect). These physical effects are then used to explain the differences in the Reynolds stress profiles and other boundary layer quantities, including the reduced near-wall peak of the streamwise Reynolds stress and the elevated Reynolds stress levels near the boundary layer edge, both observed in the finite-span wings. Other aspects of the flow, such as the downstream development of wing-tip vortices and their interactions with the surrounding flow, are reserved for future investigations.
△ Less
Submitted 11 June, 2024; v1 submitted 16 October, 2023;
originally announced October 2023.
-
In-situ Estimation of Time-averaging Uncertainties in Turbulent Flow Simulations
Authors:
Saleh Rezaeiravesh,
Christian Gscheidle,
Adam Peplinski,
Jochen Garcke,
Philipp Schlatter
Abstract:
The statistics obtained from turbulent flow simulations are generally uncertain due to finite time averaging. The techniques available in the literature to accurately estimate these uncertainties typically only work in an offline mode, that is, they require access to all available samples of a time series at once. In addition to the impossibility of online monitoring of uncertainties during the co…
▽ More
The statistics obtained from turbulent flow simulations are generally uncertain due to finite time averaging. The techniques available in the literature to accurately estimate these uncertainties typically only work in an offline mode, that is, they require access to all available samples of a time series at once. In addition to the impossibility of online monitoring of uncertainties during the course of simulations, such an offline approach can lead to input/output (I/O) deficiencies and large storage/memory requirements, which can be problematic for large-scale simulations of turbulent flows. Here, we designed, implemented and tested a framework for estimating time-averaging uncertainties in turbulence statistics in an in-situ (online/streaming/updating) manner. The proposed algorithm relies on a novel low-memory update formula for computing the sample-estimated autocorrelation functions (ACFs). Based on this, smooth modeled ACFs of turbulence quantities can be generated to accurately estimate the time-averaging uncertainties in the corresponding sample mean estimators. The resulting uncertainty estimates are highly robust, accurate, and quantitatively the same as those obtained by standard offline estimators. Moreover, the computational overhead added by the in-situ algorithm is found to be negligible. The framework is completely general and can be used with any flow solver and also integrated into the simulations over conformal and complex meshes created by adopting adaptive mesh refinement techniques. The results of the study are encouraging for the further development of the in-situ framework for other uncertainty quantification and data-driven analyses relevant not only to large-scale turbulent flow simulations, but also to the simulation of other dynamical systems leading to time-varying quantities with autocorrelated samples.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Adaptive mesh refinement for global stability analysis of transitional flows
Authors:
Daniele Massaro,
Valerio Lupi,
Adam Peplinski,
Philipp Schlatter
Abstract:
In this work, we introduce the novel application of the adaptive mesh refinement (AMR) technique in the global stability analysis of incompressible flows. The design of an accurate mesh for transitional flows is crucial. Indeed, an inadequate resolution might introduce numerical noise that triggers premature transition. With AMR, we enable the design of three different and independent meshes for t…
▽ More
In this work, we introduce the novel application of the adaptive mesh refinement (AMR) technique in the global stability analysis of incompressible flows. The design of an accurate mesh for transitional flows is crucial. Indeed, an inadequate resolution might introduce numerical noise that triggers premature transition. With AMR, we enable the design of three different and independent meshes for the non-linear base flow, the linear direct and adjoint solutions. Each of those is designed to reduce the truncation and quadrature errors for its respective solution, which are measured via the spectral error indicator. We provide details about the workflow and the refining procedure. The numerical framework is validated for the two-dimensional flow past a circular cylinder, computing a portion of the spectrum for the linearised direct and adjoint Navier-Stokes operators.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
The effect of wing-tip vortices on the flow around a NACA0012 wing
Authors:
Siavash Toosi,
Adam Peplinski,
Philipp Schlatter,
Ricardo Vinuesa
Abstract:
The goal of the present work is to perform a systematic study of the formation of wing-tip vortices and their interaction with and impact on the surrounding flow in more details. Of particular interest is the interaction of these vortices with wall turbulence and the turbulent wake. This is done by considering two wing geometries, i.e., infinite-span (periodic) and three-dimensional (wing-tip) win…
▽ More
The goal of the present work is to perform a systematic study of the formation of wing-tip vortices and their interaction with and impact on the surrounding flow in more details. Of particular interest is the interaction of these vortices with wall turbulence and the turbulent wake. This is done by considering two wing geometries, i.e., infinite-span (periodic) and three-dimensional (wing-tip) wings, at three different angles of attack: $α=0^o$, $5^o$, $10^o$. Simulations are performed by the high-order incompressible Navier-Stokes solver Nek5000 with added adaptive mesh refinement (AMR) capabilities developed at KTH.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Strong Scaling of OpenACC enabled Nek5000 on several GPU based HPC systems
Authors:
Jonathan Vincent,
**g Gong,
Martin Karp,
Adam Peplinski,
Niclas Jansson,
Artur Podobas,
Andreas Jocksch,
Jie Yao,
Fazle Hussain,
Stefano Markidis,
Matts Karlsson,
Dirk Pleiter,
Erwin Laure,
Philipp Schlatter
Abstract:
We present new results on the strong parallel scaling for the OpenACC-accelerated implementation of the high-order spectral element fluid dynamics solver Nek5000. The test case considered consists of a direct numerical simulation of fully-developed turbulent flow in a straight pipe, at two different Reynolds numbers $Re_τ=360$ and $Re_τ=550$, based on friction velocity and pipe radius. The strong…
▽ More
We present new results on the strong parallel scaling for the OpenACC-accelerated implementation of the high-order spectral element fluid dynamics solver Nek5000. The test case considered consists of a direct numerical simulation of fully-developed turbulent flow in a straight pipe, at two different Reynolds numbers $Re_τ=360$ and $Re_τ=550$, based on friction velocity and pipe radius. The strong scaling is tested on several GPU-enabled HPC systems, including the Swiss Piz Daint system, TACC's Longhorn, Jülich's JUWELS Booster, and Berzelius in Sweden. The performance results show that speed-up between 3-5 can be achieved using the GPU accelerated version compared with the CPU version on these different systems. The run-time for 20 timesteps reduces from 43.5 to 13.2 seconds with increasing the number of GPUs from 64 to 512 for $Re_τ=550$ case on JUWELS Booster system. This illustrates the GPU accelerated version the potential for high throughput. At the same time, the strong scaling limit is significantly larger for GPUs, at about $2000-5000$ elements per rank; compared to about $50-100$ for a CPU-rank.
△ Less
Submitted 4 November, 2021; v1 submitted 8 September, 2021;
originally announced September 2021.
-
Towards adaptive simulations of turbulent wings at high Reynolds numbers
Authors:
F. Mallor,
Á. Tanarro,
N. Offermans,
A. Peplinski,
R. Vinuesa,
P. Schlatter
Abstract:
Adaptive mesh refinement (AMR) in the high-order spectral-element method code Nek5000 is demonstrated and validated with well-resolved large-eddy simulations (LES) of the flow past a wing profile. In the present work, the flow around a NACA 4412 profile at a chord-based Reynolds number $Re_c=200,000$ is studied at two different angles of attack: 5 and 11 degrees. The mesh is evolved from a very co…
▽ More
Adaptive mesh refinement (AMR) in the high-order spectral-element method code Nek5000 is demonstrated and validated with well-resolved large-eddy simulations (LES) of the flow past a wing profile. In the present work, the flow around a NACA 4412 profile at a chord-based Reynolds number $Re_c=200,000$ is studied at two different angles of attack: 5 and 11 degrees. The mesh is evolved from a very coarse initial mesh by means of volume-weighted spectral error indicators, until a sufficient level of resolution is achieved at the boundary and wake regions. The non-conformal implementation of AMR allows the use of a large domain avoiding the need of a precursor RANS simulation to obtain the boundary conditions (BCs). This eliminates the effect of the steady Dirichlet BCs on the flow, which becomes a relevant source of error at higher angles of attack (specially near the trailing edge and wake regions). Furthermore, over-refinement in the far field and the associated high-aspect ratio elements are avoided, meaning less pressure-iterations of the solver and a reduced number of elements, which leads to a considerable computational cost reduction. Mean flow statistics are validated using experimental data obtained for the same profile in the Minimum Turbulence Level (MTL) wind tunnel at KTH, as well as with a previous DNS simulation, showing excellent agreement. This work constitutes an important step in the direction of studying stronger pressure gradients and higher Reynolds complex flows with the high fidelity that high-order simulations allow to achieve. Eventually, this database can be used for the development and improvement of turbulence models, in particular wall models.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
Modelling Circumbinary Gas Flows in Close T Tauri Binaries
Authors:
M. de Val-Borro,
G. F. Gahm,
H. C. Stempels,
A. Pepliński
Abstract:
Young close binaries open central gaps in the surrounding circumbinary accretion disc, but the stellar components may still gain mass from gas crossing through the gap. It is not well understood how this process operates and how the stellar components are affected by such inflows. Our main goal is to investigate how gas accretion takes place and evolves in close T Tauri binary systems. In particul…
▽ More
Young close binaries open central gaps in the surrounding circumbinary accretion disc, but the stellar components may still gain mass from gas crossing through the gap. It is not well understood how this process operates and how the stellar components are affected by such inflows. Our main goal is to investigate how gas accretion takes place and evolves in close T Tauri binary systems. In particular, we model the accretion flows around two close T Tauri binaries, V4046 Sgr and DQ Tau, both showing periodic changes in emission lines, although their orbital characteristics are very different. In order to derive the density and velocity maps of the circumbinary material, we employ two-dimensional hydrodynamic simulations with a locally isothermal equation of state. The flow patterns become quasi-stable after a few orbits in the frame co-rotating with the system. Gas flows across the circumbinary gap through the co-rotating Lagrangian points, and local circumstellar discs develop around both components. Spiral density patterns develop in the circumbinary disc that transport angular momentum efficiently. Mass is preferentially channelled towards the primary and its circumstellar disc is more massive than the disc around the secondary. We also compare the derived density distribution to observed line profile variability. The line profile variability tracing the gas flows in the central cavity shows clear similarities with the corresponding observed line profile variability in V4046 Sgr, but only when the local circumstellar disc emission was excluded. Closer to the stars normal magnetospheric accretion may dominate while further out the dynamic accretion process outlined here dominates. Periodic changes in the accretion rates onto the stars can explain the outbursts of line emission observed in eccentric systems such as DQ Tau.
△ Less
Submitted 17 January, 2011;
originally announced January 2011.
-
Numerical simulations of type III planetary migration: III. Outward migration of massive planets
Authors:
A. Peplinski,
P. Artymowicz,
G. Mellema
Abstract:
We present a numerical study of rapid, so called type III migration for Jupiter-sized planets embedded in a protoplanetary disc. We limit ourselves to the case of outward migration, and study in detail its evolution and physics, concentrating on the structure of the co-rotation and circumplanetary regions, and processes for stop** migration. We also consider the dependence of the migration beh…
▽ More
We present a numerical study of rapid, so called type III migration for Jupiter-sized planets embedded in a protoplanetary disc. We limit ourselves to the case of outward migration, and study in detail its evolution and physics, concentrating on the structure of the co-rotation and circumplanetary regions, and processes for stop** migration. We also consider the dependence of the migration behaviour on several key parameters. We perform this study using global, two-dimensional hydrodynamical simulations with adaptive mesh refinement. We find that the outward directed type III migration can be started if the initial conditions support $Z > 1$, that corresponds to initial value $M_\rmnΔ \ga 1.5$. Unlike the inward directed migration, in the outward migration the migration rate increases due to the growing of the volume of the co-orbital region. We find the migration to be strongly dependent on the rate of the mass accumulation in the circumplanetary disc, leading to two possible regimes of migration, fast and slow. The structure of the co-orbital region and the stop** mechanism differ between these two regimes.
△ Less
Submitted 18 February, 2008;
originally announced February 2008.
-
Numerical simulations of type III planetary migration: II. Inward migration of massive planets
Authors:
A. Peplinski,
P. Artymowicz,
G. Mellema
Abstract:
We present a numerical study of rapid, so called type III migration for Jupitersized planets embedded in a protoplanetary disc. We limit ourselves to the case of inward migration, and study in detail its evolution and physics, concentrating on the structure of the corotation and circumplanetary regions, and processes for stop** migration. We also consider the dependence of the migration behavi…
▽ More
We present a numerical study of rapid, so called type III migration for Jupitersized planets embedded in a protoplanetary disc. We limit ourselves to the case of inward migration, and study in detail its evolution and physics, concentrating on the structure of the corotation and circumplanetary regions, and processes for stop** migration. We also consider the dependence of the migration behaviour on several key parameters. We perform this study using the results of global, two-dimensional hydrodynamical simulations with adaptive mesh refinement. The initial conditions are chosen to satisfy the condition for rapid inward migration. We find that type III migration can be divided into two regimes, fast and slow. The structure of the coorbital region, mass accumulation rate, and migration behaviour differ between these two regimes. All our simulations show a transition from the fast to the slow regime, ending type III migration well before reaching the star. The stop** radius is found to be larger for more massive planets and less massive discs. A sharp density drop is also found to be an efficient stop** mechanism. In the fast migration limit the migration rate and induced eccentricity are lower for less massive discs, but almost do not depend on planet mass. Eccentricity is damped on the migration time scale.
△ Less
Submitted 24 September, 2007;
originally announced September 2007.
-
Numerical simulations of the type III migration:I. Disc model and convergence tests
Authors:
A. Pepliński,
P. Artymowicz,
G. Mellema
Abstract:
We investigate the fast (type III) migration regime of high-mass protoplanets orbiting in protoplanetary disks. This type of migration is dominated by corotational torques. We study the details of flow structure in the planet's vicinity, the dependence of migration rate on the adopted disc model, and the numerical convergence of models (independence of certain numerical parameters such as gravit…
▽ More
We investigate the fast (type III) migration regime of high-mass protoplanets orbiting in protoplanetary disks. This type of migration is dominated by corotational torques. We study the details of flow structure in the planet's vicinity, the dependence of migration rate on the adopted disc model, and the numerical convergence of models (independence of certain numerical parameters such as gravitational softening). We use two-dimensional hydrodynamical simulations with adaptive mesh refinement,based on the FLASH code with improved time-step** scheme. We perform global disk simulations with sufficient resolution close to the planet, which is allowed to freely move throughout the grid. We employ a new type of equation of state in which the gas temperature depends on both the distance to the star and planet, and a simplified correction for self-gravity of the circumplanetary gas. We find that the migration rate in the type III migration regime depends strongly on the gas dynamics inside the Hill sphere (Roche lobe of the planet) which, in turn, is sensitive to the aspect ratio of the circumplanetary disc. Furthermore, corrections due to the gas self-gravity are necessary to reduce numerical artifacts that act against rapid planet migration. Reliable numerical studies of Type III migration thus require consideration of both the thermal andthe self-gravity corrections, as well as a sufficient spatial resolution and the calculation of disk-planet attraction both inside and outside the Hill sphere. With this proviso, we find Type III migration to be a robust mode of migration, astrophysically promising because of a speed much faster than in the previously studied modes of migration.
△ Less
Submitted 24 September, 2007;
originally announced September 2007.
-
Vortex generation in protoplanetary disks with an embedded giant planet
Authors:
M. de Val-Borro,
P. Artymowicz,
G. D'Angelo,
A. Peplinski
Abstract:
Vortices in protoplanetary disks can capture solid particles and form planetary cores within shorter timescales than those involved in the standard core-accretion model. We investigate vortex generation in thin unmagnetized protoplanetary disks with an embedded giant planet with planet to star mass ratio $10^{-4}$ and $10^{-3}$. Two-dimensional hydrodynamical simulations of a protoplanetary disk…
▽ More
Vortices in protoplanetary disks can capture solid particles and form planetary cores within shorter timescales than those involved in the standard core-accretion model. We investigate vortex generation in thin unmagnetized protoplanetary disks with an embedded giant planet with planet to star mass ratio $10^{-4}$ and $10^{-3}$. Two-dimensional hydrodynamical simulations of a protoplanetary disk with a planet are performed using two different numerical methods. The results of the non-linear simulations are compared with a time-resolved modal analysis of the azimuthally averaged surface density profiles using linear perturbation theory. Finite-difference methods implemented in polar coordinates generate vortices moving along the gap created by Neptune-mass to Jupiter-mass planets. The modal analysis shows that unstable modes are generated with growth rate of order $0.3 Ω_K$ for azimuthal numbers m=4,5,6, where $Ω_K$ is the local Keplerian frequency. Shock-capturing Cartesian-grid codes do not generate very much vorticity around a giant planet in a standard protoplanetary disk. Modal calculations confirm that the obtained radial profiles of density are less susceptible to the growth of linear modes on timescales of several hundreds of orbital periods. Navier-Stokes viscosity of the order $ν=10^{-5}$ (in units of $a^2 Ω_p$) is found to have a stabilizing effect and prevents the formation of vortices. This result holds at high resolution runs and using different types of boundary conditions. Giant protoplanets of Neptune-mass to Jupiter-mass can excite the Rossby wave instability and generate vortices in thin disks. The presence of vortices in protoplanetary disks has implications for planet formation, orbital migration, and angular momentum transport in disks.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
A comparative study of disc-planet interaction
Authors:
M. de Val-Borro,
R. G. Edgar,
P. Artymowicz,
P. Ciecielag,
P. Cresswell,
G. D'Angelo,
E. J. Delgado-Donate,
G. Dirksen,
S. Fromang,
A. Gawryszczak,
H. Klahr,
W. Kley,
W. Lyra,
F. Masset,
G. Mellema,
R. P. Nelson,
S. -J. Paardekooper,
A. Peplinski,
A. Pierens,
T. Plewa,
K. Rice,
C. Schaefer,
R. Speith
Abstract:
We perform numerical simulations of a disc-planet system using various grid-based and smoothed particle hydrodynamics (SPH) codes. The tests are run for a simple setup where Jupiter and Neptune mass planets on a circular orbit open a gap in a protoplanetary disc during a few hundred orbital periods. We compare the surface density contours, potential vorticity and smoothed radial profiles at seve…
▽ More
We perform numerical simulations of a disc-planet system using various grid-based and smoothed particle hydrodynamics (SPH) codes. The tests are run for a simple setup where Jupiter and Neptune mass planets on a circular orbit open a gap in a protoplanetary disc during a few hundred orbital periods. We compare the surface density contours, potential vorticity and smoothed radial profiles at several times. The disc mass and gravitational torque time evolution are analyzed with high temporal resolution. There is overall consistency between the codes. The density profiles agree within about 5% for the Eulerian simulations while the SPH results predict the correct shape of the gap although have less resolution in the low density regions and weaker planetary wakes. The disc masses after 200 orbital periods agree within 10%. The spread is larger in the tidal torques acting on the planet which agree within a factor 2 at the end of the simulation. In the Neptune case the dispersion in the torques is greater than for Jupiter, possibly owing to the contribution from the not completely cleared region close to the planet.
△ Less
Submitted 1 June, 2006; v1 submitted 9 May, 2006;
originally announced May 2006.
