-
A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S. 12-meter telescopes
Authors:
Terry Ashton,
Michael Backes,
Arnim Balzer,
David Berge,
Julien Bolmont,
Simon Bonnefoy,
Francois Brun,
Thomas Chaminade,
Eric Delagnes,
Gerard Fontaine,
Matthias Füßling,
Gianluca Giavitto,
Berrie Giebels,
Jean-Francois Glicenstein,
Tobias Gräber,
Jim Hinton,
Albert Jahnke,
Stefan Klepser,
Marko Kossatz,
Axel Kretzschmann,
Valentin Lefranc,
Holger Leich,
Jean-Philippe Lenain,
Hartmut Lüdecke,
Iryna Lypova
, et al. (19 additional authors not shown)
Abstract:
The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their perform…
▽ More
The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their performance and robustness. The upgrade involved replacing all camera components except for the photomultiplier tubes (PMTs). This meant develo** new hardware for the trigger, readout, power, cooling and mechanical systems, and new software for camera control and data acquisition. Several novel technologies were employed in the cameras: the readout is built around the new NECTAr digitizer chip, developed for the next generation of IACTs; the camera electronics is fully controlled and read out via Ethernet using a combination of FPGA and embedded ARM computers; the software uses modern libraries such as Apache Thrift, ZMQ and Protocol buffers. This work describes in detail the design and the performance of the upgraded cameras.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Performance of the upgraded H.E.S.S. cameras
Authors:
S. Bonnefoy,
T. Ashton,
M. Backes,
A. Balzer,
D. Berge,
F. Brun,
T. Chaminade,
E. Delagnes,
G. Fontaine,
M. Füßling,
G. Giavitto,
B. Giebels,
J. F. Glicenstein,
T. Gräber,
J. A. Hinton,
A. Jahnke,
S. Klepser,
M. Kossatz,
A. Kretzschmann,
V. Lefranc,
H. Leich,
J. P. Lenain,
H. Lüdecke,
I. Lypova,
P. Manigot
, et al. (15 additional authors not shown)
Abstract:
The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded in 2015/2016, with the goals of reducing the system failure rate, reducing the dead time and improving the overall performance of the array. This conference contribution describes the various tests that were carried out on the cameras and their sub-components both in the lab and on site. It also gives an overview of the co…
▽ More
The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded in 2015/2016, with the goals of reducing the system failure rate, reducing the dead time and improving the overall performance of the array. This conference contribution describes the various tests that were carried out on the cameras and their sub-components both in the lab and on site. It also gives an overview of the commissioning and calibration procedures adopted during and after the installation, including e.g. flat-fielding and trigger threshold scans. Finally, it reports in detail about the overall performance of the four new H.E.S.S. I cameras, using very recent data.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
Hardware and software architecture of the upgraded H.E.S.S. cameras
Authors:
S. Klepser,
T. Ashton,
M. Backes,
A. Balzer,
D. Berge,
S. Bonnefoy,
F. Brun,
T. Chaminade,
E. Delagnes,
G. Fontaine,
M. Füßling,
G. Giavitto,
B. Giebels,
J. F. Glicenstein,
T. Gräber,
J. A. Hinton,
A. Jahnke,
M. Kossatz,
A. Kretzschmann,
V. Lefranc,
H. Leich,
J. P. Lenain,
H. Lüdecke,
I. Lypova,
P. Manigot
, et al. (15 additional authors not shown)
Abstract:
In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes CT1-4 have undergone a major upgrade. The entire electronics has been replaced, using NECTAr chips for the front-end readout. A new ventilation system has been installed and several auxiliary components have been replaced. Besides this, the internal control and readout software was rewritten from scratch in a modern and m…
▽ More
In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes CT1-4 have undergone a major upgrade. The entire electronics has been replaced, using NECTAr chips for the front-end readout. A new ventilation system has been installed and several auxiliary components have been replaced. Besides this, the internal control and readout software was rewritten from scratch in a modern and modular way. Ethernet technology was used wherever possible to ensure both flexibility, stability and high bandwidth. An overview of the installed components will be given.
△ Less
Submitted 14 July, 2017;
originally announced July 2017.
-
A major electronics upgrade for the H.E.S.S. Cherenkov telescopes 1-4
Authors:
G. Giavitto,
T. Ashton,
A. Balzer,
D. Berge,
F. Brun,
T. Chaminade,
E. Delagnes,
G. Fontaine,
M. Füßling,
B. Giebels,
J. F. Glicenstein,
T. Gräber,
J. A. Hinton,
A. Jahnke,
S. Klepser,
M. Kossatz,
A. Kretzschmann,
V. Lefranc,
H. Leich,
H. Lüdecke,
P. Manigot,
V. Marandon,
E. Moulin,
M. de,
P. Nayman
, et al. (9 additional authors not shown)
Abstract:
The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gam…
▽ More
The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to ~100 TeV. Since the camera electronics of CT1-4 are much older than the one of CT5, an upgrade is being carried out; first deployment was in 2015, full operation is planned for 2016. The goals of this upgrade are threefold: reducing the dead time of the cameras, improving the overall performance of the array and reducing the system failure rate related to aging. Upon completion, the upgrade will assure the continuous operation of H.E.S.S. at its full sensitivity until and possibly beyond the advent of CTA. In the design of the new components, several CTA concepts and technologies were used and are thus being evaluated in the field: The upgraded read-out electronics is based on the NECTAR readout chips; the new camera front- and back-end control subsystems are based on an FPGA and an embedded ARM computer; the communication between subsystems is based on standard Ethernet technologies. These hardware solutions offer good performance, robustness and flexibility. The design of the new cameras is reported here.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
Fast Beam Condition Monitor for CMS: performance and upgrade
Authors:
Jessica L. Leonard,
Alan Bell,
Piotr Burtowy,
Anne Dabrowski,
Maria Hempel,
Hans Henschel,
Wolfgang Lange,
Wolfgang Lohmann,
Nathaniel Odell,
Marek Penno,
Brian Pollack,
Dominik Przyborowski,
Vladimir Ryjov,
David Stickland,
Roberval Walsh,
Weronika Warzycha,
Agnieszka Zagozdzinska
Abstract:
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is b…
▽ More
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
