-
Probing the structure of a massive filament: ArTeMiS 350 and 450 micron map** of the integral-shaped filament in Orion A
Authors:
F. Schuller,
Ph. André,
Y. Shimajiri,
A. Zavagno,
N. Peretto,
D. Arzoumanian,
T. Csengeri,
V. Könyves,
P. Palmeirim,
S. Pezzuto,
A. Rigby,
H. Roussel,
H. Ajeddig,
L. Dumaye,
P. Gallais,
J. Le Pennec,
J. Martignac,
M. Mattern,
V. Revéret,
L. Rodriguez,
M. Talvard
Abstract:
(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover exten…
▽ More
(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover extended emission. The combined Herschel-ArTeMiS maps provide details on the distribution of dense, cold material, with a high spatial dynamic range, from our 8'' resolution (0.016 pc) up to the size of the map ~10-15 deg. By combining Herschel and ArTeMiS data at 160, 250, 350 and 450 micron, we constructed high-resolution temperature and H2 column density maps. We extracted radial profiles from the column density map in several, representative portions of the ISF, that we fitted with Gaussian and Plummer models to derive their intrinsic widths. We also compared the distribution of material traced by ArTeMiS with that seen in the higher density tracer N2H+(1-0) recently observed with the ALMA interferometer. All the radial profiles that we extracted show clear deviation from a Gaussian, with evidence for an inner plateau, previously not seen using Herschel-only data. We measure intrinsic half-power widths in the range 0.06 to 0.11 pc. This is significantly larger than the Gaussian widths measured for fibers seen in N2H+, which probably traces only the dense innermost regions of the large-scale filament. These half-power widths are within a factor of two of the value of 0.1 pc found for a large sample of nearby filaments in various low-mass star-forming regions, which tends to indicate that the physical conditions governing the fragmentation of prestellar cores within transcritical or supercritical filaments are the same over a large range of masses per unit length.
△ Less
Submitted 26 May, 2021; v1 submitted 8 April, 2021;
originally announced April 2021.
-
Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS
Authors:
Ph. André,
V. Revéret,
V. Könyves,
D. Arzoumanian,
J. Tigé,
P. Gallais,
H. Roussel,
J. Le Pennec,
L. Rodriguez,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. Delisle,
F. Visticot,
L. Dumaye,
C. De Breuck,
Y. Shimajiri,
F. Motte,
S. Bontemps,
M. Hennemann,
A. Zavagno,
D. Russeil,
N. Schneider
, et al. (6 additional authors not shown)
Abstract:
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by superson…
▽ More
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation.
We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc.
Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
The ArTéMiS wide-field submillimeter camera: preliminary on-sky performances at 350 microns
Authors:
Vincent Reveret,
Philippe André,
Jean Le Pennec,
Michel Talvard,
Patrick Agnèse,
Agnès Arnaud,
Laurent Clerc,
Carlos de Breuck,
Jean-Charles Cigna,
Cyrille Delisle,
Eric Doumayrou,
Lionel Duband,
Didier Dubreuil,
Luc Dumaye,
Eric Ercolani,
Pascal Gallais,
Elodie Groult,
Thierry Jourdan,
Bernadette Leriche,
Bruno Maffei,
Michel Lortholary,
Jérôme Martignac,
Wilfried Rabaud,
Johan Relland,
Louis Rodriguez
, et al. (2 additional authors not shown)
Abstract:
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and Un…
▽ More
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and University of Manchester (UK) in collaboration with ESO. We introduce the mechanical and optical design, as well as the cryogenics and electronics of the ArTeMiS camera. ArTeMiS detectors are similar to the ones developed for the Herschel PACS photometer but they are adapted to the high optical load encountered at APEX site. Ultimately, ArTeMiS will contain 4 sub-arrays at 200 microns and 2x8 sub-arrays at 350 and 450 microns. We show preliminary lab measurements like the responsivity of the instrument to hot and cold loads illumination and NEP calculation. Details on the on-sky commissioning runs made in 2013 and 2014 at APEX are shown. We used planets (Mars, Saturn, Uranus) to determine the flat-field and to get the flux calibration. A pointing model was established in the first days of the runs. The average relative pointing accuracy is 3 arcsec. The beam at 350 microns has been estimated to be 8.5 arcsec, which is in good agreement with the beam of the 12 m APEX dish. Several observing modes have been tested, like On-The-Fly for beam-maps or large maps, spirals or raster of spirals for compact sources. With this preliminary version of ArTeMiS, we concluded that the map** speed is already more than 5 times better than the previous 350 microns instrument at APEX. The median NEFD at 350 microns is 600 mJy.s1/2, with best values at 300 mJy.s1/2. The complete instrument with 5760 pixels and optimized settings will be installed during the first half of 2015.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Resolving the Vela C ridge with P-ArTeMiS and Herschel
Authors:
T. Hill,
Ph. Andre,
D. Arzoumanian,
F. Motte,
V. Minier,
A. Menshchikov,
P. Didelon,
M. Hennemann,
V. Konyves,
Q. Nguyen-Luong,
P. Palmeirim,
N. Peretto,
N. Schneider,
S. Bontemps,
F. Louvet,
D. Elia,
T. Giannini,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
M. Lortholary
, et al. (3 additional authors not shown)
Abstract:
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the…
▽ More
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArTéMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
Unveiling Far-Infrared Counterparts of Bright Submillimeter Galaxies Using PACS Imaging
Authors:
H. Dannerbauer,
E. Daddi,
G. E. Morrison,
B. Altieri,
P. Andreani,
H. Aussel,
S. Berta,
A. Bongiovanni,
A. Cava,
J. Cepa,
A. Cimatti,
H. Dominguez,
D. Elbaz,
N. Forster Schreiber,
R. Genzel,
C. Gruppioni,
B. Horeau,
H. S. Hwang,
E. Le Floc'h,
J. Le Pennec,
D. Lutz,
G. Magdis,
B. Magnelli,
R. Maiolino,
R. Nordon
, et al. (13 additional authors not shown)
Abstract:
We present a search for Herschel-PACS counterparts of dust-obscured, high-redshift objects previously selected at submillimeter and millimeter wavelengths in the Great Observatories Origins Deep Survey North field. We detect 22 of 56 submillimeter galaxies (39%) with a SNR of >=3 at 100 micron down to 3.0 mJy, and/or at 160 micron down to 5.7 mJy. The fraction of SMGs seen at 160 micron is higher…
▽ More
We present a search for Herschel-PACS counterparts of dust-obscured, high-redshift objects previously selected at submillimeter and millimeter wavelengths in the Great Observatories Origins Deep Survey North field. We detect 22 of 56 submillimeter galaxies (39%) with a SNR of >=3 at 100 micron down to 3.0 mJy, and/or at 160 micron down to 5.7 mJy. The fraction of SMGs seen at 160 micron is higher than that at 100 micron. About 50% of radio-identified SMGs are associated with PACS sources. We find a trend between the SCUBA/PACS flux ratio and redshift, suggesting that these flux ratios could be used as a coarse redshift indicator. PACS undetected submm/mm selected sources tend to lie at higher redshifts than the PACS detected ones. A total of 12 sources (21% of our SMG sample) remain unidentified and the fact that they are blank fields at Herschel-PACS and VLA 20 cm wavelength may imply higher redshifts for them than for the average SMG population (e.g., z>3-4). The Herschel-PACS imaging of these dust-obscured starbursts at high-redshifts suggests that their far-infrared spectral energy distributions have significantly different shapes than template libraries of local infrared galaxies.
△ Less
Submitted 12 July, 2010;
originally announced July 2010.
-
Irradiation tests performed on the Herschel/Pacs bolometer arrays
Authors:
B. Horeau,
A. Claret,
L. Rodriguez,
N. Billot,
O. Boulade,
E. Doumayrou,
K. Okumura,
J. Le Pennec
Abstract:
A new concept of bolometer arrays is used for the imager of PACS, one of the three instruments aboard the future Herschel space observatory. Within the framework of PACS photometer characterization, irradiation tests were performed on a dedicated bolometer array in order to study long-term and short-term radiation effects. The main objective was to study particles impacts on the detectors applicab…
▽ More
A new concept of bolometer arrays is used for the imager of PACS, one of the three instruments aboard the future Herschel space observatory. Within the framework of PACS photometer characterization, irradiation tests were performed on a dedicated bolometer array in order to study long-term and short-term radiation effects. The main objective was to study particles impacts on the detectors applicable to future observations in orbit and possible hard and/or soft curing to restore its performances. Cobalt-60 gamma ray irradiations did not show significant degradation, so we mainly focused on single events effects (SEE). Protons and alphas irradiations were then performed at the Van de Graaf tandem accelerator at the Institut de Physique Nucleaire (IPN, Orsay, France), respectively at 20MeV and 30MeV. Observation showed that the shape of signal perturbations clearly depends on the location of the impacts either on the detector itself or the read-out circuit. Software curing has then to be anticipated in order to deglitch the signal. This test gives also a unique opportunity to measure some parameters of the detector: electrical crosstalk and thermo- electrical time constant. However a detailed bolometer model is necessary to understand the contribution of the thermal response in relation with the electrical response. It will be the second step of our study. Finally the complete radiation evaluation proved that this detector can be used in spatial experiments.
△ Less
Submitted 22 June, 2010;
originally announced June 2010.
-
From filamentary clouds to prestellar cores to the stellar IMF: Initial highlights from the Herschel Gould Belt survey
Authors:
Ph. André,
A. Men'shchikov,
S. Bontemps,
V. Könyves,
F. Motte,
N. Schneider,
P. Didelon,
V. Minier,
P. Saraceno,
D. Ward-Thompson,
J. Di Francesco,
G. White,
S. Molinari,
L. Testi,
A. Abergel,
M. Griffin,
Th. Henning,
P. Royer,
B. Merín,
R. Vavrek,
M. Attard,
D. Arzoumanian,
C. D. Wilson,
P. Ade,
H. Aussel
, et al. (32 additional authors not shown)
Abstract:
We summarize the first results from the Gould Belt survey, obtained toward the Aquila Rift and Polaris Flare regions during the 'science demonstration phase' of Herschel. Our 70-500 micron images taken in parallel mode with the SPIRE and PACS cameras reveal a wealth of filamentary structure, as well as numerous dense cores embedded in the filaments. Between ~ 350 and 500 prestellar cores and ~ 45-…
▽ More
We summarize the first results from the Gould Belt survey, obtained toward the Aquila Rift and Polaris Flare regions during the 'science demonstration phase' of Herschel. Our 70-500 micron images taken in parallel mode with the SPIRE and PACS cameras reveal a wealth of filamentary structure, as well as numerous dense cores embedded in the filaments. Between ~ 350 and 500 prestellar cores and ~ 45-60 Class 0 protostars can be identified in the Aquila field, while ~ unbound starless cores and no protostars are observed in the Polaris field. The prestellar core mass function (CMF) derived for the Aquila region bears a strong resemblance to the stellar initial mass function (IMF), already confirming the close connection between the CMF and the IMF with much better statistics than earlier studies. Comparing and contrasting our Herschel results in Aquila and Polaris, we propose an observationally-driven scenario for core formation according to which complex networks of long, thin filaments form first within molecular clouds, and then the densest filaments fragment into a number of prestellar cores via gravitational instability.
△ Less
Submitted 25 May, 2010; v1 submitted 14 May, 2010;
originally announced May 2010.
-
Evidence of triggered star formation in G327.3-0.6. Dust-continuum map** of an infrared dark cloud with P-ArTéMiS
Authors:
V. Minier,
Ph. André,
P. Bergman,
F. Motte,
F. Wyrowski,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
G. Hamon,
P. -O. Lagage,
M. Lortholary,
J. Martignac,
V. Revéret,
H. Roussel,
M. Talvard,
G. Willmann,
H. Olofsson
Abstract:
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in…
▽ More
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArTéMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArTéMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.
-
First 450-micron dust continuum map** of the massive star-forming region NGC 3576 with the P-ArTeMiS bolometer camera
Authors:
P. André,
V. Minier,
P. Gallais,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. De Breuck,
G. Hamon,
N. Schneider,
S. Bontemps,
P. O. Lagage,
E. Pantin,
H. Roussel,
M. Miller,
C. R. Purcell,
T. Hill,
J. Stutzki
Abstract:
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron…
▽ More
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage.
△ Less
Submitted 23 September, 2008;
originally announced September 2008.
-
The Herschel/PACS 2560 bolometers imaging camera
Authors:
Nicolas Billot,
Patrick Agnese,
Jean-Louis Augueres,
Alain Beguin,
Andre Bouere,
Olivier Boulade,
Christophe Cara,
Christelle Cloue,
Eric Doumayrou,
Lionel Duband,
Benoit Horeau,
Isabelle Le Mer,
Jean Le Pennec,
Jerome Martignac,
Koryo Okumura,
Vincent Reveret,
Marc Sauvage,
Francois Simoens,
Laurent Vigroux
Abstract:
The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelengt…
▽ More
The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelength channel has a mosaic of 2 of the same bolometer arrays for a total of 512 pixels. The 10 arrays have been fabricated, individually tested and integrated in the photometer. They represent the first filled arrays of fully collectively built bolometers with a cold multiplexed readout, allowing for a properly sampled coverage of the full instrument field of view. The camera has been fully characterized and the ground calibration campaign will take place after its delivery to the PACS consortium in mid 2006. The bolometers, working at a temperature of 300 mK, have a NEP close to the BLIP limit and an optical bandwidth of 4 to 5 Hz that will permit the map** of large sky areas. This paper briefly presents the concept and technology of the detectors as well as the cryocooler and the warm electronics. Then we focus on the performances of the integrated focal planes (responsivity, NEP, low frequency noise, bandwidth).
△ Less
Submitted 26 June, 2006;
originally announced June 2006.
-
A study on the use of the PACS bolometer arrays for submillimeter ground-based telescopes
Authors:
Vincent Reveret,
Louis R. Rodriguez,
Philippe Andre,
Benoit Horeau,
Jean Le Pennec,
Patrick Agnese
Abstract:
A new kind of bolometric architecture has been successfully developed for the PACS photometer onboard the Herschel submillimeter observatory. These new generation CCD-like arrays are buttable and enable the conception of large fully sampled focal planes. We present a feasibility study of the adaptation of these bolometer arrays to ground-based submillimeter telescopes. We have developed an elect…
▽ More
A new kind of bolometric architecture has been successfully developed for the PACS photometer onboard the Herschel submillimeter observatory. These new generation CCD-like arrays are buttable and enable the conception of large fully sampled focal planes. We present a feasibility study of the adaptation of these bolometer arrays to ground-based submillimeter telescopes. We have developed an electro-thermal numerical model to simulate the performances of the bolometers under specific ground-based conditions (different wavelengths and background powers for example). This simulation permits to determine the optimal parameters for each condition and shows that the bolometers can be background limited in each transmission window between 200 and 450 microns. We also present a new optical system that enables to have a maximum absorption of the bolometer in each atmospheric windows. The description of this system and measurements are showed.
△ Less
Submitted 18 June, 2006;
originally announced June 2006.
