-
Integration of High-Tc Superconductors with High Q Factor Oxide Mechanical Resonators
Authors:
Nicola Manca,
Alexei Kalaboukhov,
Alejandro E. Plaza,
Leonélio Cichetto Jr,
Emilio Bellingeri,
Francesco Bisio,
Floriana Lombardi,
Daniele Marré,
Luca Pellegrino
Abstract:
Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of func…
▽ More
Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of functional materials is a key step for both applied and fundamental science. However, combining functional materials and silicon-based compounds is challenging. An alternative approach is fabricating MEMS based on complex heterostructures made of materials inherently showing a variety of physical properties such as transition metal oxides. Here, we report on the integration of a high-Tc superconductor YBa2Cu3O7 (YBCO) with high Q factor micro-bridge resonator made of a single-crystal LaAlO3 (LAO) thin film. LAO resonators are tensile strained, with a stress of 345 MPa, show Q factor in the range of tens of thousands, and have low roughness. The topmost YBCO layer deposited by Pulse Laser Deposition shows a superconducting transition starting at 90 K with zero resistance below 78 K. This result opens new possibilities towards the development of advanced transducers, such as bolometers or magnetic field detectors, as well as basic science experiments in solid state physics, material science, and quantum opto-mechanics.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Totally Geodesic and Parallel Hypersurfaces of Siklos Spacetimes
Authors:
Giovanni Calvaruso,
Lorenzo Pellegrino,
Joeri Van der Veken
Abstract:
We classify and describe totally geodesic and parallel hypersurfaces for the entire class of Siklos spacetimes. A large class of minimal hypersurfaces is also described.
We classify and describe totally geodesic and parallel hypersurfaces for the entire class of Siklos spacetimes. A large class of minimal hypersurfaces is also described.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Totally Geodesic and Parallel Hypersurfaces of Gödel-type spacetimes
Authors:
Giovanni Calvaruso,
Lorenzo Pellegrino,
Joeri Van der Veken
Abstract:
We classify parallel and totally geodesic hypersurfaces of the relevant class of Gödel-type spacetimes, with particular regard to the homogeneous examples.
We classify parallel and totally geodesic hypersurfaces of the relevant class of Gödel-type spacetimes, with particular regard to the homogeneous examples.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Energy Systems Test Case Discovery Enabled by Test Case Profile and Repository
Authors:
Petra Raussi,
Jirapa Kamsamrong,
Alexandros Paspatis,
Kai Heussen,
Tesfaye Amare Zerihun,
Edmund Widl,
Filip Pröstl Andrén,
Jawad H Kazmi,
Thomas I. Strasser,
Felipe Castro,
Luigi Pellegrino
Abstract:
Smart energy systems comprise multiple domains like power, thermal, control, information, and communication technology, which increases the complexity of research and development studies. This expansion also requires larger and ever so complex experimental pilot environments driving the demand for geographically distributed multi-research infrastructure tests. The Holistic Test Description approac…
▽ More
Smart energy systems comprise multiple domains like power, thermal, control, information, and communication technology, which increases the complexity of research and development studies. This expansion also requires larger and ever so complex experimental pilot environments driving the demand for geographically distributed multi-research infrastructure tests. The Holistic Test Description approach supports the design of multi-domain and multi-research infrastructure tests by organizing the test cases into comprehensive segments, ensuring all relevant items for testing are covered. These test cases eventually form a pool, which to understand holistically would require studying and reading all the descriptions. This work proposes therefore the concept of Test Case Profiles to improve test case discovery and the structured creation of them. Test Case Profiles add further structure to the indexing in test case repositories. Along with the proposed indexing method, four different use cases are introduced to motivate additional applications of the proposed concept.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Strain, Young's modulus, and structural transition of EuTiO3 thin films probed by micro-mechanical methods
Authors:
Nicola Manca,
Gaia Tarsi,
Alexei Kalaboukhov,
Francesco Bisio,
Federico Caglieris,
Floriana Lombardi,
Daniele Marré,
Luca Pellegrino
Abstract:
EuTiO3 (ETO) is a well-known complex oxide mainly investigated for its magnetic properties and its incipient ferro-electricity. In this work, we demonstrate the realization of suspended micro-mechanical structures, such as cantilevers and micro-bridges, from 100 nm-thick single-crystal epitaxial ETO films deposited on top of SrTiO3(100) substrates. By combining profile analysis and resonance frequ…
▽ More
EuTiO3 (ETO) is a well-known complex oxide mainly investigated for its magnetic properties and its incipient ferro-electricity. In this work, we demonstrate the realization of suspended micro-mechanical structures, such as cantilevers and micro-bridges, from 100 nm-thick single-crystal epitaxial ETO films deposited on top of SrTiO3(100) substrates. By combining profile analysis and resonance frequency measurements of these devices, we obtain the Young's modulus, strain, and strain gradients of the ETO thin films. Moreover, we investigate the ETO anti-ferro-distorsive transition by temperature-dependent characterizations, which show a non-monotonic and hysteretic mechanical response. Comparison between experimental and literature data allows us to weight the contribution from thermal expansion and softening to the tuning slope, while a full understanding of the origin of such a wide hysteresis is still missing. We also discuss the influence of oxygen vacancies on the reported mechanical properties by comparing stoichiometric and oxygen-deficient samples.
△ Less
Submitted 6 October, 2023; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Helix surfaces for Berger-like metrics on the anti-de Sitter space
Authors:
Giovanni Calvaruso,
Irene I. Onnis,
Lorenzo Pellegrino,
Daria Uccheddu
Abstract:
We consider the Anti-de Sitter space $\mathbb{H}^3_1$ equipped with Berger-like metrics, that deform the standard metric of $\mathbb{H}^3_1$ in the direction of the hyperbolic Hopf vector field. Helix surfaces are the ones forming a constant angle with such vector field. After proving that these surfaces have (any) constant Gaussian curvature, we achieve their explicit local description in terms o…
▽ More
We consider the Anti-de Sitter space $\mathbb{H}^3_1$ equipped with Berger-like metrics, that deform the standard metric of $\mathbb{H}^3_1$ in the direction of the hyperbolic Hopf vector field. Helix surfaces are the ones forming a constant angle with such vector field. After proving that these surfaces have (any) constant Gaussian curvature, we achieve their explicit local description in terms of a one-parameter family of isometries of the space and some suitable curves. These curves turn out to be general helices, which meet at a constant angle the fibers of the hyperbolic Hopf fibration.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Sensing enhancement of a Fabry-Perot THz cavity using switchable VO2 mirrors
Authors:
Gian Paolo Papari,
Anna Lucia Pellegrino,
Graziella Malandrino,
Antonello Andreone
Abstract:
We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation…
▽ More
We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation (VO2 in the insulating state) and a high sensitivity to tiny changes in the cavity refractive index (VO2 in the conducting state). In the first state, the low loss regime enables to adjust the cavity length and easily optimize the resonances due to the Fabry-Perot (FP) effect in the Si plates and in the cavity volume. The activation of the metallic-like state instead, by dam** the FP oscillations in the plates, promotes the onset of a comb-like spectrum that can be exploited as a versatile tool for accurate sensing applications. Using both an analytical model and full-wave simulations, we estimate the device response to variation in the refractive index of the cavity volume, showing that the proposed structure can achieve sensitivity values among the highest reported for THz sensors.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
STAR HE-Linac Complete Detailed Design Report
Authors:
A. Bacci,
L. Faillace,
L. Pellegrino,
D. Alesini,
S. Bini,
F. Cardelli,
G. Catuscelli,
F. Chiarelli,
I. Drebot,
A. Esposito,
A. Gallo,
A. Ghigo,
D. Giannotti,
V. Petrillo,
L. Piersanti,
E. Puppin,
M. Rossetti Conti,
L. Serafini,
A. Stella,
A. Vannozzi,
S. Vescovi
Abstract:
This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High En…
▽ More
This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High Energy Linac), hereafter STAR-HEL. The technical components as well as the installation / test procedures and the ancillary equipment involved in such an upgrade are the object of this Document, named Complete Detailed Design Report. A technical offer was submitted by INFN in the frame of its participation to the tender issued by UniCal, describing a possible energy upgrade of the STAR Linac, with an electron beam energy boosted from 65 MeV up to 150 MeV by means of Radiofrequency (RF) accelerating sections and power stations based on S-band technology (ie, 2856 MHz RF frequency). Following the Contract signature, INFN conceived and conceptually designed a technology change that offers several advantages both on performances and on operational reliability of STAR-HEL, based on adopting C-band technology (ie, 5712 MHz RF frequency) for accelerating sections and RF power stations. Such a technology change was illustrated in a dedicated document named "improvement option for STAR-2 HE-Linac", addressed to UniCal STAR Management Board and tender R.U.P. for approval on June 9th, 2021. INFN received a formal letter of approval on June 16th, 2021.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
The role of etching anisotropy in the fabrication of freestanding oxide microstructures on SrTiO3(100), SrTiO3(110), and SrTiO3(111) substrates
Authors:
Alejandro Plaza,
Nicola Manca,
Cristina Bernini,
Daniele Marré,
Luca Pellegrino
Abstract:
The release process for the fabrication of freestanding oxide microstructures relies on appropriate, controllable and repeatable wet etching procedures. SrTiO3 is among the most employed substrates for oxide thin films growth and can be decomposed in HF:water solution. Such process is strongly anisotropic and is affected by local defects and substrate cut-plane. We analyze the etching behavior of…
▽ More
The release process for the fabrication of freestanding oxide microstructures relies on appropriate, controllable and repeatable wet etching procedures. SrTiO3 is among the most employed substrates for oxide thin films growth and can be decomposed in HF:water solution. Such process is strongly anisotropic and is affected by local defects and substrate cut-plane. We analyze the etching behavior of SrTiO3 substrates having (100), (110), and (111) cut-planes during immersion in a 5% HF:water solution. The etching process over the three substrates is compared in terms of pitting, anisotropy, macroscopic etch rate and underetching effects around HF-resistant (La,Sr)MnO3 thin film micropatterns. The release of targeted structures, such as the reported (La,Sr)MnO3 freestanding microbridges, depends on the substrate crystallographic symmetry and on the in-plane orientation of the structures themselves along the planar directions. By comparing the etching evolution at two different length scales, we distinguish two regimes for the propagation of the etching front: an intrinsic one, owning to a specific lattice direction, and a macroscopic one, resulting from the mixing of different etching fronts. We report the morphologies of the etched SrTiO3 surfaces and the geometries of the underetched regions as well as of the microbridge clam** zones. The reported analysis will enable the design of complex MEMS devices by allowing to model the evolution of the etching process required for the release of arbitrary structures made of oxide thin films deposited on top of STO.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Challenges for the interaction region design of the Future Circular Collider FCC-ee
Authors:
Manuela Boscolo,
Nicola Bacchetta,
Michael Benedikt,
Laurent Brunetti,
Helmut Burkhardt,
Andrea Ciarma,
Mogens Dam,
Francesco Fransesini,
Mark Jones,
Roberto Kersevan,
Mike Koratzinos,
Marian Lueckhof,
Mauro Migliorati,
Eva Montbarbon,
Alexander Novokhatski,
Katsunobu Oide,
Luigi Pellegrino,
Freddy Poirier,
Maurizio Serluca,
Michael K. Sullivan,
Leonard Watrelot,
Frank Zimmermann
Abstract:
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discu…
▽ More
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
KLASH Conceptual Design Report
Authors:
D. Alesini,
D. Babusci,
P. Beltrame S. J.,
F. Björkeroth,
F. Bossi,
P. Ciambrone,
G. Delle Monache,
D. Di Gioacchino,
P. Falferi,
A. Gallo,
C. Gatti,
A. Ghigo,
M. Giannotti,
G. Lamanna,
C. Ligi,
G. Maccarrone,
A. Mirizzi,
D. Montanino,
D. Moricciani,
A. Mostacci,
M. Mück,
E. Nardi,
F. Nguyen,
L. Pellegrino,
A. Rettaroli
, et al. (4 additional authors not shown)
Abstract:
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated…
▽ More
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Positron driven muon source for a muon collider
Authors:
D. Alesini,
M. Antonelli,
M. E. Biagini,
M. Boscolo,
O. R. Blanco-García,
A. Ciarma,
R. Cimino,
M. Iafrati,
A. Giribono,
S. Guiducci,
L. Pellegrino,
M. Rotondo,
C. Vaccarezza,
A. Variola,
A. Allegrucci,
F. Anulli,
M. Bauce,
F. Collamati,
G. Cavoto,
G. Cesarini,
F. Iacoangeli,
R. Li Voti,
A. Bacci,
I. Drebot,
P. Raimondi
, et al. (33 additional authors not shown)
Abstract:
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an…
▽ More
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D.
△ Less
Submitted 19 May, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
The Klash Proposal: Status and Perspectives
Authors:
C. Gatti,
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
N. Crescini,
D. Di Gioacchino,
P. Falferi,
G. Lamanna,
C. Ligi,
A. Ortolan,
L. Pellegrino,
A. Rettaroli,
G. Ruoso,
S. Tocci
Abstract:
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion Sear…
▽ More
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{aγγ}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Ultralow friction of ink-jet printed graphene flakes
Authors:
R. Buzio,
A. Gerbi,
S. Uttiya,
C. Bernini,
A. E. Del Rio Castillo,
F. Palazon,
A. S. Siri,
V. Pellegrini,
L. Pellegrino,
F. Bonaccorso
Abstract:
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies in…
▽ More
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing procedure. Notably, the printed FLG flakes show ultralow friction comparable with micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with lateral size of a few tens of nanometres, and with thickness as small as ~ 2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing preferential sites for originating secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF
Authors:
M. Ferrario,
D. Alesini,
M. P. Anania,
M. Artioli,
A. Bacci,
S. Bartocci,
R. Bedogni,
M. Bellaveglia,
A. Biagioni,
F. Bisesto,
F. Brandi,
E. Brentegani,
F. Broggi,
B. Buonomo,
P. L. Campana,
G. Campogiani,
C. Cannaos,
S. Cantarella,
F. Cardelli,
M. Carpanese,
M. Castellano,
G. Castorina,
N. Catalan Lasheras,
E. Chiadroni,
A. Cianchi
, et al. (95 additional authors not shown)
Abstract:
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in…
▽ More
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Effects of high energy proton irradiation on the superconducting properties of Fe(Se,Te) thin films
Authors:
Giulia Sylva,
Emilio Bellingeri,
Carlo Ferdeghini,
Alberto Martinelli,
Ilaria Pallecchi,
Luca Pellegrino,
Marina Putti,
Gianluca Ghigo,
Laura Gozzelino,
Daniele Torsello,
Gaia Grimaldi,
Antonio Leo,
Angela Nigro,
Valeria Braccini
Abstract:
In this paper we explore the effects of 3.5 MeV proton irradiation on Fe(Se,Te) thin films grown on CaF2. In particular, we carry out a systematic experimental investigation with different irradiation fluences up to 7.30x10^16 cm^-2 and different proton implantation depths, in order to clarify whether and to what extent the critical current is enhanced or suppressed, what are the effects of irradi…
▽ More
In this paper we explore the effects of 3.5 MeV proton irradiation on Fe(Se,Te) thin films grown on CaF2. In particular, we carry out a systematic experimental investigation with different irradiation fluences up to 7.30x10^16 cm^-2 and different proton implantation depths, in order to clarify whether and to what extent the critical current is enhanced or suppressed, what are the effects of irradiation on the critical temperature, the resistivity and the critical magnetic fields, and finally what is the role played by the substrate in this context. We find that the effect of irradiation on superconducting properties is generally small as compared to the case of other iron-based superconductors. Such effect is more evident on the critical current density Jc, while it is minor on the transition temperature Tc, on the normal state resistivity and on the upper critical field Hc2 up to the highest fluences explored in this work. In addition, our analysis shows that when protons implant in the substrate far from the superconducting film, the critical current can be enhanced up to 50% of the pristine value at 7 T and 12 K, while there is no appreciable effect on critical temperature and critical fields together with a slight decrease in resistivity. On the contrary, when the implantation layer is closer to the film-substrate interface, both critical current and temperature show a decrease accompanied by an enhancement of the resistivity and the lattice strain. This result evidences that possible modifications induced by irradiation in the substrate may affect the superconducting properties of the film via lattice strain. The robustness of the Fe(Se,Te) system to irradiation induced damage makes it a promising compound for the fabrication of magnets in high-energy accelerators.
△ Less
Submitted 7 December, 2017;
originally announced December 2017.
-
Selective high frequency mechanical actuation driven by the VO2 electronic instability
Authors:
Nicola Manca,
Luca Pellegrino,
Teruo Kanki,
Warner J. Venstra,
Giordano Mattoni,
Yoshiyuki Higuchi,
Hidekazu Tanaka,
Andrea D. Caviglia,
Daniele Marré
Abstract:
Micro- and nano-electromechanical resonators are a fundamental building block of modern technology, used in environmental monitoring, robotics, medical tools as well as fundamental science. These devices rely on dedicated electronics to generate their driving signal, resulting in an increased complexity and size. Here, we present a new paradigm to achieve high-frequency mechanical actuation based…
▽ More
Micro- and nano-electromechanical resonators are a fundamental building block of modern technology, used in environmental monitoring, robotics, medical tools as well as fundamental science. These devices rely on dedicated electronics to generate their driving signal, resulting in an increased complexity and size. Here, we present a new paradigm to achieve high-frequency mechanical actuation based on the metal-insulator transition of VO$\mathrm{_2}$, where the steep variation of its electronic properties enables to realize high-frequency electrical oscillations. The dual nature of this phase change, which is both electronic and structural, turns the electrical oscillations into an intrinsic actuation mechanism, powered by a small DC voltage and capable to selectively excite the different mechanical modes of a microstructure. Our results pave the way towards the realization of micro- and nano-electro-mechanical systems with autonomous actuation from integrated DC power sources such as solar cells or micro-batteries.
△ Less
Submitted 18 September, 2017; v1 submitted 15 March, 2017;
originally announced April 2017.
-
Programmable Mechanical Resonances in MEMS by Localized Joule Heating of Phase Change Materials
Authors:
Nicola Manca,
Luca Pellegrino,
Teruo Kanki,
Syouta Yamasaki,
Hidekazu Tanaka,
Antonio Sergio Siri,
Daniele Marré
Abstract:
A programmable micromechanical resonator based on a VO2 thin film is reported. Multiple mechanical eigenfrequency states are programmed using Joule heating as local power source, gradually driving the phase transition of VO2 around its Metal-Insulator transition temperature. Phase coexistence of domains is used to tune the stiffness of the device via local control of internal stresses and mechanic…
▽ More
A programmable micromechanical resonator based on a VO2 thin film is reported. Multiple mechanical eigenfrequency states are programmed using Joule heating as local power source, gradually driving the phase transition of VO2 around its Metal-Insulator transition temperature. Phase coexistence of domains is used to tune the stiffness of the device via local control of internal stresses and mechanical properties. This study opens perspectives for develo** mechanically configurable nanostructure arrays.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Reversible oxygen vacancies do** in (La$_{0.7}$,Sr$_{0.3}$)MnO$_3$ microbridges by combined self-heating and electromigration
Authors:
Nicola Manca,
Luca Pellegrino,
Daniele Marré
Abstract:
Combination of electric fields and Joule self-heating is used to change the oxygen stoichiometry and promote oxygen vacancy drift in a free-standing $\mathrm{(La,Sr)MnO_3}$ thin film microbridge placed in controlled atmosphere. By controlling the local oxygen vacancies concentration, we can reversibly switch our LSMO-based microbridges from metallic to insulating behavior on timescales lower than…
▽ More
Combination of electric fields and Joule self-heating is used to change the oxygen stoichiometry and promote oxygen vacancy drift in a free-standing $\mathrm{(La,Sr)MnO_3}$ thin film microbridge placed in controlled atmosphere. By controlling the local oxygen vacancies concentration, we can reversibly switch our LSMO-based microbridges from metallic to insulating behavior on timescales lower than 1 s and with small applied voltages (<5 V). The strong temperature gradients given by the microbridge geometry strongly confine the motion of oxygen vacancies, limiting the modified region within the free-standing area. Multiple resistive states can be set by selected current pulses that determine different oxygen vacancies profiles within the device . Qualitative analysis of device operation is also provided with the support of Finite Element Analysis.
△ Less
Submitted 2 February, 2017;
originally announced February 2017.
-
Influence of thermal boundary conditions on the current-driven resistive transition in $\mathbf{VO_2}$ microbridges
Authors:
Nicola Manca,
Teruo Kanki,
Hidekazu Tanaka,
Daniele Marré,
Luca Pellegrino
Abstract:
We investigate the resistive switching behaviour of $\mathrm{VO_2}$ microbridges under current bias as a function of temperature and thermal coupling with the heat bath. Upon increasing the electrical current bias, the formation of the metallic phase can progress smoothly or through sharp jumps. The magnitude and threshold current values of these sharp resistance drops show random behaviour and ar…
▽ More
We investigate the resistive switching behaviour of $\mathrm{VO_2}$ microbridges under current bias as a function of temperature and thermal coupling with the heat bath. Upon increasing the electrical current bias, the formation of the metallic phase can progress smoothly or through sharp jumps. The magnitude and threshold current values of these sharp resistance drops show random behaviour and are dramatically influenced by thermal dissipation conditions. Our results also evidence how the propagation of the metallic phase induced by electrical current in $\mathrm{VO_2}$, and thus the shape of the resulting high-conductivity path, are not predictable. We discuss the origin of the switching events through a simple electro-thermal model based on the domain structure of $\mathrm{VO_2}$ films that can be useful to improve the stability and controllability of future $\mathrm{VO_2}$-based devices.
△ Less
Submitted 2 February, 2017;
originally announced February 2017.
-
Nanopatterning process based on epitaxial masking for the fabrication of electronic and spintronic devices made of La0.67Sr0.33MnO3/LaAlO3/SrTiO3 heterostructures with in situ interfaces
Authors:
Francesca Telesio,
Luca Pellegrino,
Ilaria Pallecchi,
Daniele Marré,
Emanuela Esposito,
Emiliano di Gennaro,
Amit Khare,
Fabio Miletto Granozio
Abstract:
The fabrication of oxide electronics devices is presently hindered by the lack of standardized and well established patterning procedures, applicable down to the nanoscale. In this work, the authors propose a procedure to obtain patterns with resolution around 100 nm on (La,Sr)MnO3/LaAlO3/SrTiO3 heterostructures. Our method is based on a multistep technique, which includes wet and dry etching, epi…
▽ More
The fabrication of oxide electronics devices is presently hindered by the lack of standardized and well established patterning procedures, applicable down to the nanoscale. In this work, the authors propose a procedure to obtain patterns with resolution around 100 nm on (La,Sr)MnO3/LaAlO3/SrTiO3 heterostructures. Our method is based on a multistep technique, which includes wet and dry etching, epitaxial masking, and e-beam lithography. Our procedure is devised to define independent patterns on the interfacial two dimensional electron gas and on the metallic top electrode, while preserving an all-in situ approach for the heterostructure growth. The authors show results on nano-scale devices based on (La,Sr)MnO3/LaAlO3/SrTiO3, suitable for oxide spintronics applications.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
DAFNE Consolidation Program and Operation with the KLOE-2 Detector
Authors:
Catia Milardi,
David Alesini,
Maria Enrica Biagini,
Simone Bini,
Manuela Boscolo,
Bruno Buonomo,
Sergio Cantarella,
Antonio De Santis,
Giampiero Di Pirro,
Giovanni Delle Monache,
Alessandro Drago,
Luca Foggetta,
Oscar Frasciello,
Alessandro Gallo,
Riccardo Gargana,
Andrea Ghigo,
Francesco Guatieri,
Susanna Guiducci,
Franco Iungo,
Carlo Ligi,
Andrea Michelotti,
Luigi Pellegrino,
Ruggero Ricci,
Ugo Rotundo,
Giancarlo Sensolini
, et al. (5 additional authors not shown)
Abstract:
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measure…
▽ More
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measured, so far, are considerably higher with respect to the previous KLOE runs, and are: L(inst) ~ 2.0 1032 cm-2s-1, and L(day) ~ 12.5 pb-1 respectively. A general review concerning refurbishing activities, machine optimization efforts and data taking performances is presented and discussed.
△ Less
Submitted 28 September, 2015;
originally announced September 2015.
-
Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System
Authors:
O. Adriani,
S. Albergo,
D. Alesini,
M. Anania,
D. Angal-Kalinin,
P. Antici,
A. Bacci,
R. Bedogni,
M. Bellaveglia,
C. Biscari,
N. Bliss,
R. Boni,
M. Boscolo,
F. Broggi,
P. Cardarelli,
K. Cassou,
M. Castellano,
L. Catani,
I. Chaikovska,
E. Chiadroni,
R. Chiche,
A. Cianchi,
J. Clarke,
A. Clozza,
M. Coppola
, et al. (84 additional authors not shown)
Abstract:
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr…
▽ More
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
Highly effective and isotropic pinning in epitaxial Fe(Se,Te) thin films grown on CaF2 substrates
Authors:
V. Braccini,
S. Kawale,
E. Reich,
E. Bellingeri,
L. Pellegrino,
A. Sala,
M. Putti,
K. Higashikawa,
T. Kiss,
B. Holzapfel,
C. Ferdeghini
Abstract:
We report on the isotropic pinning obtained in epitaxial Fe(Se,Te) thin films grown on CaF2 (001) substrate. High critical current density values larger than 1 MA/cm2 in self field in liquid helium are reached together with a very weak dependence on the magnetic field and a complete isotropy. Analysis through Transmission Electron Microscopy evidences the presence of defects looking like lattice d…
▽ More
We report on the isotropic pinning obtained in epitaxial Fe(Se,Te) thin films grown on CaF2 (001) substrate. High critical current density values larger than 1 MA/cm2 in self field in liquid helium are reached together with a very weak dependence on the magnetic field and a complete isotropy. Analysis through Transmission Electron Microscopy evidences the presence of defects looking like lattice disorder at a very small scale, between 5 and 20 nm, which are thought to be responsible for such isotropic behavior in contrast to what observed on SrTiO3, where defects parallel to the c-axis enhance pinning in that direction
△ Less
Submitted 4 September, 2013;
originally announced September 2013.
-
Da$Φ$ne developments for the KLOE-2 experimental run
Authors:
C. Milardi,
D. Alesini,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
F. Bossi,
B. Buonomo,
A. Clozza,
G. Delle Monache,
T. Demma,
E. Di Pasquale,
G. Di Pirro,
A. Drago,
M. Esposito,
A. Gallo,
A. Ghigo,
S. Guiducci,
C. Ligi,
F. Marcellini,
G. Mazzitelli,
L. Pellegrino,
M. Preger,
L. Quintieri,
P. Raimondi
, et al. (16 additional authors not shown)
Abstract:
Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a…
▽ More
Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a careful design effort and a several months long shutdown. The high luminosity interaction region has been deeply revised in order to take into account the effect on the beam caused by the solenoidal field of the experimental detector and to ensure background rejection. The shutdown has been also used to implement several other modifications aimed at improving beam dynamics: the wiggler poles have been displaced from the magnet axis in order to cancel high order terms in the field, the feedback systems have been equipped with stronger power supplies and more efficient kickers and electrodes have been inserted inside the wiggler and the dipole vacuum chambers, in the positron ring, to avoid the e-cloud formation. A low level RF feedback has been added to the cavity control in both rings.
△ Less
Submitted 8 June, 2010;
originally announced June 2010.
-
Cu_{2}O as nonmagnetic semiconductor for spin transport in crystalline oxide electronics
Authors:
I. Pallecchi,
L. Pellegrino,
N. Banerjee,
M. Cantoni,
A. Gadaleta,
A. S. Siri,
D. Marré
Abstract:
We probe spin transport in Cu_{2}O by measuring spin valve effect in La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co and La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/La_{0.7}Sr_{0.3}MnO_{3} epitaxial heterostructures. In La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co systems we find that a fraction of out-of-equilibrium spin polarized carrier actually travel across the Cu_{2}O layer up to distances of almost 100 nm at low temperature.…
▽ More
We probe spin transport in Cu_{2}O by measuring spin valve effect in La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co and La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/La_{0.7}Sr_{0.3}MnO_{3} epitaxial heterostructures. In La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co systems we find that a fraction of out-of-equilibrium spin polarized carrier actually travel across the Cu_{2}O layer up to distances of almost 100 nm at low temperature. The corresponding spin diffusion length dspin is estimated around 40 nm. Furthermore, we find that the insertion of a SrTiO_{3} tunneling barrier does not improve spin injection, likely due to the matching of resistances at the interfaces. Our result on dspin may be likely improved, both in terms of Cu_{2}O crystalline quality and sub-micrometric morphology and in terms of device geometry, indicating that Cu_{2}O is a potential material for efficient spin transport in devices based on crystalline oxides.
△ Less
Submitted 19 April, 2010;
originally announced April 2010.
-
Design considerations for future DAFNE upgrade
Authors:
D. Alesini,
G. Benedetti,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
A. Clozza,
G. Delle Monache,
G. Di Pirro,
A. Drago,
A. Gallo,
A. Ghigo,
S. Guiducci,
M. Incurvati,
E. Levichev,
C. Ligi,
F. Marcellini,
G. Mazzitelli,
C. Milardi,
L. Pellegrino,
M. A. Preger,
P. Raimondi,
R. Ricci,
U. Rotundo,
C. Sanelli
, et al. (10 additional authors not shown)
Abstract:
The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the…
▽ More
The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the end of year 2006. A scientific program for DAFNE beyond that date has not been defined yet and it is matter of discussion in the high-energy physics and accelerator physics communities. In this paper we present some future scenarios for DAFNE, discussing the expected ultimate performances of the machine as it is now and addressing the design for an energy and/or luminosity upgrade. The options presented in the following are not exhaustive and they are intended to give a glance of what is doable using the existing infrastructures.
△ Less
Submitted 17 November, 2004;
originally announced November 2004.
-
DAFNE operation with the FINUDA experiment
Authors:
C. Milardi,
D. Alesini,
G. Benedetti,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
A. Clozza,
D. Delle Monache,
G. Di Pirro,
A. Drago,
A. Gallo,
A. Ghigo,
S. Guiducci,
M. Incurvati,
C. Ligi,
F. Marcellini,
G. Mazzitelli,
L. Pellegrino,
M. A. Preger,
P. Raimondi,
R. Ricci,
U. Rotundo,
C. Sanelli,
M. Serio
, et al. (7 additional authors not shown)
Abstract:
DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while kee** on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to op…
▽ More
DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while kee** on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to operate at different solenoid fields. Among many other hardware upgrades one of the most significant is the resha** of the wiggler pole profile to improve the field quality and the machine dynamic aperture. Commissioning of the collider in the new configuration has been completed in short time. The peak luminosity delivered to FINUDA has reached 6 10^31 s-1cm-2, with a daily integrated value close to 4 pb-1.
△ Less
Submitted 16 August, 2004;
originally announced August 2004.
-
DAFNE
Authors:
S. Guiducci,
D. Alesini,
G. Benedetti,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
A. Clozza,
G. Delle Monache,
G. Di Pirro,
A. Drago,
A. Gallo,
A. Ghigo,
F. Marcellini,
G. Mazzitelli,
C. Milardi,
L. Pellegrino,
M. A. Preger,
P. Raimondi,
R. Ricci,
C. Sanelli,
M. Serio,
F. Sgamma,
A. Stecchi,
C. Vaccarezza
, et al. (1 additional authors not shown)
Abstract:
The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported.
The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported.
△ Less
Submitted 25 May, 2004; v1 submitted 1 March, 2004;
originally announced March 2004.
