-
Modeling Phonon-mediated Quasiparticle Poisoning in Superconducting Qubit Arrays
Authors:
Eric Yelton,
Clayton P. Larson,
Vito Iaia,
Kenneth Dodge,
Guglielmo La Magna,
Paul G. Baity,
Ivan V. Pechenezhskiy,
Robert McDermott,
Noah Kurinsky,
Gianluigi Catelani,
Britton L. T. Plourde
Abstract:
Correlated errors caused by ionizing radiation impacting superconducting qubit chips are problematic for quantum error correction. Such impacts generate quasiparticle (QP) excitations in the qubit electrodes, which temporarily reduce qubit coherence significantly. The many energetic phonons produced by a particle impact travel efficiently throughout the device substrate and generate quasiparticles…
▽ More
Correlated errors caused by ionizing radiation impacting superconducting qubit chips are problematic for quantum error correction. Such impacts generate quasiparticle (QP) excitations in the qubit electrodes, which temporarily reduce qubit coherence significantly. The many energetic phonons produced by a particle impact travel efficiently throughout the device substrate and generate quasiparticles with high probability, thus causing errors on a large fraction of the qubits in an array simultaneously. We describe a comprehensive strategy for the numerical simulation of the phonon and quasiparticle dynamics in the aftermath of an impact. We compare the simulations with experimental measurements of phonon-mediated QP poisoning and demonstrate that our modeling captures the spatial and temporal footprint of the QP poisoning for various configurations of phonon downconversion structures. We thus present a path forward for the operation of superconducting quantum processors in the presence of ionizing radiation.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Measurement-induced state transitions in dispersive qubit readout schemes
Authors:
Konstantin N. Nesterov,
Ivan V. Pechenezhskiy
Abstract:
The dispersive readout scheme enables quantum non-demolition measurement of superconducting qubits. An increased readout power can shorten the readout time and reduce the state discrimination error but can promote qubit transitions into higher noncomputational states. The ability to predict the onset of these measurement-induced state transitions can aid the optimization of qubit circuits and prov…
▽ More
The dispersive readout scheme enables quantum non-demolition measurement of superconducting qubits. An increased readout power can shorten the readout time and reduce the state discrimination error but can promote qubit transitions into higher noncomputational states. The ability to predict the onset of these measurement-induced state transitions can aid the optimization of qubit circuits and provide means for comparing the readout performance of different qubit types. Building upon the concept of dressed coherent states, we consider two straightforward metrics for determining the maximum number of photons that can be used for dispersive readout without causing state transitions. We focus on the fluxonium readout to demonstrate the independence of the metrics from any qubit-type-specific approximations. The dispersive readout of transmons and other superconducting qubits can be treated universally in the same fashion.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Counting statistics of microwave photons in circuit QED
Authors:
Konstantin N. Nesterov,
Ivan V. Pechenezhskiy,
Maxim G. Vavilov
Abstract:
In superconducting circuit architectures for quantum computing, microwave resonators are often used both to isolate qubits from the electromagnetic environment and to facilitate qubit state readout. We analyze the full counting statistics of photons emitted from such driven readout resonators both in and beyond the dispersive approximation. We calculate the overlap between emitted-photon distribut…
▽ More
In superconducting circuit architectures for quantum computing, microwave resonators are often used both to isolate qubits from the electromagnetic environment and to facilitate qubit state readout. We analyze the full counting statistics of photons emitted from such driven readout resonators both in and beyond the dispersive approximation. We calculate the overlap between emitted-photon distributions for the two qubit states and explore strategies for its minimization with the purpose of increasing fidelity of intensity-sensitive readout techniques. In the dispersive approximation and at negligible qubit relaxation, both distributions are Poissonian, and the overlap between them can be easily made arbitrarily small. Nondispersive terms of the Hamiltonian generate squeezing and the Purcell decay with the latter effect giving the dominant contribution to the overlap between two distributions.
△ Less
Submitted 13 May, 2020; v1 submitted 13 November, 2019;
originally announced November 2019.
-
The superconducting quasicharge qubit
Authors:
Ivan V. Pechenezhskiy,
Raymond A. Mencia,
Long B. Nguyen,
Yen-Hsiang Lin,
Vladimir E. Manucharyan
Abstract:
The non-dissipative non-linearity of a Josephson junction converts macroscopic superconducting circuits into artificial atoms, enabling some of the best controlled quantum bits (qubits) today. Three fundamental types of superconducting qubits are known, each reflecting a distinct behavior of quantum fluctuations in a Cooper pair condensate: single charge tunneling (charge qubit), single flux tunne…
▽ More
The non-dissipative non-linearity of a Josephson junction converts macroscopic superconducting circuits into artificial atoms, enabling some of the best controlled quantum bits (qubits) today. Three fundamental types of superconducting qubits are known, each reflecting a distinct behavior of quantum fluctuations in a Cooper pair condensate: single charge tunneling (charge qubit), single flux tunneling (flux qubit), and phase oscillations (phase qubit). Yet, the dual nature of charge and flux suggests that circuit atoms must come in pairs. Here we introduce the missing one, named "blochnium". It exploits a coherent insulating response of a single Josephson junction that emerges from the extension of phase fluctuations beyond the $2π$-interval. Evidence for such effect was found in an out-of-equilibrium dc-transport through junctions connected to high-impedance leads, although a full consensus is absent to date. We shunt a weak junction with an exceptionally high-value inductance -- the key technological innovation behind our experiment -- and measure the rf-excitation spectrum as a function of external magnetic flux through the resulting loop. The junction's insulating character manifests by the vanishing flux-sensitivity of the qubit transition between the ground and the first excited states, which nevertheless rapidly recovers for transitions to higher energy states. The spectrum agrees with a duality map** of blochnium onto transmon, which replaces the external flux by the offset charge and introduces a new collective quasicharge variable in place of the superconducting phase. Our result unlocks the door to an unexplored regime of macroscopic quantum dynamics in ultrahigh-impedance circuits, which may have applications to quantum computing and quantum metrology of direct current.
△ Less
Submitted 6 March, 2021; v1 submitted 5 July, 2019;
originally announced July 2019.
-
Digital coherent control of a superconducting qubit
Authors:
Edward Leonard Jr.,
Matthew A. Beck,
JJ Nelson,
Brad G. Christensen,
Ted Thorbeck,
Caleb Howington,
Alexander Opremcak,
Ivan V. Pechenezhskiy,
Kenneth Dodge,
Nicholas P. Dupuis,
Jaseung Ku,
Francisco Schlenker,
Joseph Suttle,
Christopher Wilen,
Shaojiang Zhu,
Maxim G. Vavilov,
Britton L. T. Plourde,
Robert McDermott
Abstract:
High-fidelity gate operations are essential to the realization of a fault-tolerant quantum computer. In addition, the physical resources required to implement gates must scale efficiently with system size. A longstanding goal of the superconducting qubit community is the tight integration of a superconducting quantum circuit with a proximal classical cryogenic control system. Here we implement coh…
▽ More
High-fidelity gate operations are essential to the realization of a fault-tolerant quantum computer. In addition, the physical resources required to implement gates must scale efficiently with system size. A longstanding goal of the superconducting qubit community is the tight integration of a superconducting quantum circuit with a proximal classical cryogenic control system. Here we implement coherent control of a superconducting transmon qubit using a Single Flux Quantum (SFQ) pulse driver cofabricated on the qubit chip. The pulse driver delivers trains of quantized flux pulses to the qubit through a weak capacitive coupling; coherent rotations of the qubit state are realized when the pulse-to-pulse timing is matched to a multiple of the qubit oscillation period. We measure the fidelity of SFQ-based gates to be ~95% using interleaved randomized benchmarking. Gate fidelities are limited by quasiparticle generation in the dissipative SFQ driver. We characterize the dissipative and dispersive contributions of the quasiparticle admittance and discuss mitigation strategies to suppress quasiparticle poisoning. These results open the door to integration of large-scale superconducting qubit arrays with SFQ control elements for low-latency feedback and stabilization.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Measurement of a Superconducting Qubit with a Microwave Photon Counter
Authors:
A. Opremcak,
I. V. Pechenezhskiy,
C. Howington,
B. G. Christensen,
M. A. Beck,
E. Leonard Jr.,
J. Suttle,
C. Wilen,
K. N. Nesterov,
G. J. Ribeill,
T. Thorbeck,
F. Schlenker,
M. G. Vavilov,
B. L. T. Plourde,
R. McDermott
Abstract:
Fast, high-fidelity measurement is a key ingredient for quantum error correction. Conventional approaches to the measurement of superconducting qubits, involving linear amplification of a microwave probe tone followed by heterodyne detection at room temperature, do not scale well to large system sizes. Here we introduce an alternative approach to measurement based on a microwave photon counter. We…
▽ More
Fast, high-fidelity measurement is a key ingredient for quantum error correction. Conventional approaches to the measurement of superconducting qubits, involving linear amplification of a microwave probe tone followed by heterodyne detection at room temperature, do not scale well to large system sizes. Here we introduce an alternative approach to measurement based on a microwave photon counter. We demonstrate raw single-shot measurement fidelity of 92%. Moreover, we exploit the intrinsic dam** of the counter to extract the energy released by the measurement process, allowing repeated high-fidelity quantum non-demolition measurements. Crucially, our scheme provides access to the classical outcome of projective quantum measurement at the millikelvin stage. In a future system, counter-based measurement could form the basis for a scalable quantum-to-classical interface.
△ Less
Submitted 2 March, 2018;
originally announced March 2018.
-
Microwave-Activated Controlled-Z Gate for Fixed-Frequency Fluxonium Qubits
Authors:
Konstantin N. Nesterov,
Ivan V. Pechenezhskiy,
Chen Wang,
Vladimir E. Manucharyan,
Maxim G. Vavilov
Abstract:
The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: when biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the…
▽ More
The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: when biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here we describe a controlled-Z gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near 500 MHz. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.
△ Less
Submitted 26 September, 2018; v1 submitted 8 February, 2018;
originally announced February 2018.
-
Imaging structural transitions in organometallic molecules on Ag(100) for solar thermal energy storage
Authors:
Jongweon Cho,
Ivan V. Pechenezhskiy,
Luis Berbil-Bautista,
Steven K. Meier,
K. Peter C. Vollhardt,
Michael F. Crommie
Abstract:
The use of opto-thermal molecular energy storage at the nanoscale creates new opportunities for powering future microdevices with flexible synthetic tailorability. Practical application of these molecular materials, however, requires a deeper microscopic understanding of how their behavior is altered by the presence of different types of substrates. Here we present single-molecule resolved scannin…
▽ More
The use of opto-thermal molecular energy storage at the nanoscale creates new opportunities for powering future microdevices with flexible synthetic tailorability. Practical application of these molecular materials, however, requires a deeper microscopic understanding of how their behavior is altered by the presence of different types of substrates. Here we present single-molecule resolved scanning tunneling microscopy imaging of thermally- and optically-induced structural transitions in (fulvalene)tetracarbonyldiruthenium molecules adsorbed onto a Ag(100) surface as a prototype system. Both the parent complex and the photoisomer display distinct thermally-driven phase transformations when they are in contact with a Ag(100) surface. This behavior is consistent with the loss of carbonyl ligands due to strong molecule-surface coupling. Ultraviolet radiation induces marked structural changes only in the intact parent complex, thus indicating a photoisomerization reaction. These results demonstrate how stimuli-induced structural transitions in this class of molecule depend on the nature of the underlying substrate.
△ Less
Submitted 28 February, 2017;
originally announced March 2017.
-
Phonon-Mediated Quasiparticle Poisoning of Superconducting Microwave Resonators
Authors:
U. Patel,
Ivan V. Pechenezhskiy,
B. L. T. Plourde,
M. G. Vavilov,
R. McDermott
Abstract:
Nonequilibrium quasiparticles represent a significant source of decoherence in superconducting quantum circuits. Here we investigate the mechanism of quasiparticle poisoning in devices subjected to local quasiparticle injection. We find that quasiparticle poisoning is dominated by the propagation of pair-breaking phonons across the chip. We characterize the energy dependence of the timescale for q…
▽ More
Nonequilibrium quasiparticles represent a significant source of decoherence in superconducting quantum circuits. Here we investigate the mechanism of quasiparticle poisoning in devices subjected to local quasiparticle injection. We find that quasiparticle poisoning is dominated by the propagation of pair-breaking phonons across the chip. We characterize the energy dependence of the timescale for quasiparticle poisoning. Finally, we observe that incorporation of extensive normal metal quasiparticle traps leads to a more than order of magnitude reduction in quasiparticle loss for a given injected quasiparticle power.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Intermolecular interactions and substrate effects for an adamantane monolayer on the Au(111) surface
Authors:
Yuki Sakai,
Giang D. Nguyen,
Rodrigo B. Capaz,
Sinisa Coh,
Ivan V. Pechenezhskiy,
** Hong,
Feng Wang,
Michael F. Crommie,
Susumu Saito,
Steven G. Louie,
Marvin L. Cohen
Abstract:
We study theoretically and experimentally the infrared (IR) spectrum of an adamantane monolayer on a Au(111) surface. Using a new STM-based IR spectroscopy technique (IRSTM) we are able to measure both the nanoscale structure of an adamantane monolayer on Au(111) as well as its infrared spectrum, while DFT-based ab initio calculations allow us to interpret the microscopic vibrational dynamics reve…
▽ More
We study theoretically and experimentally the infrared (IR) spectrum of an adamantane monolayer on a Au(111) surface. Using a new STM-based IR spectroscopy technique (IRSTM) we are able to measure both the nanoscale structure of an adamantane monolayer on Au(111) as well as its infrared spectrum, while DFT-based ab initio calculations allow us to interpret the microscopic vibrational dynamics revealed by our measurements. We find that the IR spectrum of an adamantane monolayer on Au(111) is substantially modified with respect to the gas-phase IR spectrum. The first modification is caused by the adamantane--adamantane interaction due to monolayer packing and it reduces the IR intensity of the 2912 cm$^{-1}$ peak (gas phase) by a factor of 3.5. The second modification originates from the adamantane--gold interaction and it increases the IR intensity of the 2938 cm$^{-1}$ peak (gas phase) by a factor of 2.6, and reduces its frequency by 276 cm$^{-1}$. We expect that the techniques described here can be used for an independent estimate of substrate effects and intermolecular interactions in other diamondoid molecules, and for other metallic substrates.
△ Less
Submitted 19 September, 2013;
originally announced September 2013.
-
Photo-current and photo-voltage oscillations in the two-dimensional electron system: screening and "anti-screening" of a potential profile
Authors:
S. I. Dorozhkin,
I. V. Pechenezhskiy,
L. N. Pfeiffer,
K. W. West,
V. Umansky,
K. von Klitzing,
J. H. Smet
Abstract:
We observe in state-of-the-art GaAs based 2D electron systems microwave induced photo-current and photo-voltage oscillations around zero as a function of the applied magnetic field. The photo-signals pass zero whenever the microwave frequency is close to a multiple of the cyclotron resonance frequency. They originate from built-in electric fields due to for instance band bending at contacts. The…
▽ More
We observe in state-of-the-art GaAs based 2D electron systems microwave induced photo-current and photo-voltage oscillations around zero as a function of the applied magnetic field. The photo-signals pass zero whenever the microwave frequency is close to a multiple of the cyclotron resonance frequency. They originate from built-in electric fields due to for instance band bending at contacts. The oscillations correspond to a suppression (screening) or an enhancement ("anti-screening") of these fields by the photo-excited electrons.
△ Less
Submitted 1 July, 2008;
originally announced July 2008.
